Over 1 million tech questions and answers.

Started with error code 0xC0000006 and now I have Error Code: 0x803002

Q: Started with error code 0xC0000006 and now I have Error Code: 0x803002

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

RELEVANCY SCORE 200
Preferred Solution: Started with error code 0xC0000006 and now I have Error Code: 0x803002

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

Read other 1 answers
RELEVANCY SCORE 111.6

I was about to install Command and COnquer renegade, but then a message popped up saying that "The application failed to initialize (0xc0000006). Click on OK to terminate the application." Any idea what that means????


I NEEDS TO KNOW BECAUSE i AM ONE OF THE BIGGEST GAMERS IN YOUR LIFE!!!!!

Read other answers
RELEVANCY SCORE 110.4

Computer info

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Basic, Service Pack 2, 32 bit
Processor: Genuine Intel(R) CPU T2060 @ 1.60GHz, x86 Family 6 Model 14 Stepping 12
Processor Count: 2
RAM: 1013 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 63981 MB, Free - 19766 MB; D: Total - 10239 MB, Free - 6450 MB;
Motherboard: Dell Inc., 0KD882
Antivirus: Microsoft Security Essentials, Updated and Enabled

I cant get Windows explorer.exe to open up, keeps giving me error code oxc0000006, This started about 3 days ago now, and tried virus cleaning from some early posts I did see here.

Can someone help me please, sorry im an idiot when it comes to these things
 

A:Error code 0xc0000006 on start up

Read other 7 answers
RELEVANCY SCORE 95.6

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

Read other answers
RELEVANCY SCORE 94

Hi,
I am after a little help please. I have a Toshiba c850 satellite laptop. It started displaying an error code.
I have purchased a re boot disc off the internet as I did not have a one.
When turn on my laptop and Toshiba start screen appears, it is saying automatic repair, then I get a message saying can not complete automatic repair as a partition is missing. Can anybody help me with this issue please?

Read other answers
RELEVANCY SCORE 93.6

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers
RELEVANCY SCORE 92

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

Read other 1 answers
RELEVANCY SCORE 89.6

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers
RELEVANCY SCORE 89.6

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.










Solved!
Go to Solution.

A:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

Read other 3 answers
RELEVANCY SCORE 89.6

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers
RELEVANCY SCORE 86.4

the application failed to initilize properly press ok to terminate program

A:code 0xc0000006

xp sp3

Read other 1 answers
RELEVANCY SCORE 86.4

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

A:BSOD PLaying League of Legends error code 0x0000001e a common code

Hi,

Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
Driver Issues:


Code:

Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version


C... Read more

Read other 9 answers
RELEVANCY SCORE 86.4

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

Read other answers
RELEVANCY SCORE 86

After poking around on other threads, there's a chance this is related to the hardware drivers. However, I wasn't able to find a thread with this exact error code, so any help on what this means and how to correct it would be appreciated thanks! This is generating on a LENOVO ideapad Y700 series laptop (15 inch).













Solved!

Go to Solution.

A:ERROR CODE AFTER A HARDWARE SCAN, RESULT CODE: WVC007002-UM7YSI

Update your Intel Video driver and the false error from LSC should disappear.WVC007002-UM7YSIw=windowsvc=video cardtest 007result code 002um7ysi is a hash code of the serial number of your machine and useless info<unless you chose to send feeback info to Lenovo

Read other 1 answers
RELEVANCY SCORE 86

Hi guys, first time posting so apologies in advance if I do something illegal. As far as I can gather, I should be posting in the right forum. I've been having system stability problems for the last week or so. I think it might be because of a mass driver update across my system since nothing else seems to be the cause.

Basically, I updated some drivers bout a week ago and now the PC either hangs or auto-restart when I'm playing games. At first I thought it might be due to OC instability, so I reset my bios to default settings. Didn't quite work out completely as the system still exhibits the "sudden death" during gaming.

Have tried the steps in the sticky above on refreshing the page file. defragging etc. Problem still hasn't gone away. All rams have cleared 7 cycles of memtest at 2.65 volts and 2.6 volts without problems, though everything has been reset to stock already.

My system specs are as follows :
AMD 64X2 4200+
MSI K8N Neo 4 Platinum
2 x 512mb Kingston CH5 PC3200 DDR
2 x 512mb Mushkin Black Line BH5 DDR
Inno 6600GT 128mb
Creative Audugy ZS Platinum
BenQ 1640
Gigabyte CD-RW
Hitachi/IBM 80GB SATA II
Western Digital 240GB SATA HD
Verudium Vortex 430W

Am fairly sure its not a power issue and the core temp never exceeds 49 degrees even at full load. Its about 44/45 idle. Am guessing it might be the soundcard though... Anyone able to help?

Would be most grateful for any assistance and thanks in advance.
... Read more

A:system error code Error code 100000d1

Looks like NV4mini.sys is the Nvidia faulting driver... Your Inno 6800GT drivers are at fault
 

Read other 4 answers
RELEVANCY SCORE 86

Greetings, I need help solving the error codes below. Thank you

Product: Windows Defender -- Error 1923. Service 'Windows Defender' (WinDefend) could not be installed. Verify that you have sufficient privileges to install system services.

Product: Microsoft Office Enterprise 2007 - Update 'Security Update for Microsoft Office Word 2007 (KB2251419)' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\user\LOCALS~1\Temp\MSIfb8e4.LOG.

I hope I have provide useful information to get your help.

Sincerely

A:Error code 1923 and Error code 1603

hi, got a questions for ya. have you uninstalled any virus protection software lately? the reason i ask it might of left remnants behind if you did not use the removal tool.

Read other 1 answers
RELEVANCY SCORE 86

I have a HP 522c AMD Athlon 2000+, running windows xp. There is an integrated video card that went bad. So in installed an AGP video card it is a 3D Prophet 4000XT 32 MB. Now that the card is installed when I have it activated there is a code 12 on one of the pci to pci bridges so that my network card in the other pci slots will not work. I have tried the network card on other computers and it works fine, i have also tried the video card and it works fine. I also tried other items in the pci slots while the agp card is in(modem, sound card) and i still recieve the same error. The card works when a pci bridge is enabled but only with the VGAsave driver and with very low quality. When i check the device manager while both pci to pci bridges are enabled, when i can only run the VGAsave driver, it says the there is a conflict under the I/O range with the VGAsave and an Pci to Pci bridge. Any windows updates just delets the pci to pci bridge listed in the device manager. And i have tried all the drivers i could from AMD, HP, Hercules. Any help would be welcomed on how to fix this.
 

A:Code 12 in xp on a Pci to Pci bridge, Recieve a code 12 error with video card

your hp box is not only engineered by hp (who tend to focus on low assembly costs) but is an oem build, thus severely limiting your options. a suggested next step would be to attempt to poke around in the bios setup utility and/or to try out a wider variety of cards/slot configurations. good luck.
 

Read other 9 answers
RELEVANCY SCORE 86

I am completely stumped by this problem. I will do my best to explain it and see what you fine folks can do.

I had an older bluetooth dongle, off-brand model, 2010-2011 year, that I installed on my new desktop computer. It worked, but sound quality on my Sony Dr-BT101 headset wasn't great. It worked well with my bluetooth-enabled phones and tablets, so I suspected the dongle. I bought a CSR8510 dongle, which came with a CSR Cambridge Radio Harmony software stack. I installed the software, and turned on the headset, paired it, but no sound came out of the headset. I went to Sound, saw no entries. Went to device managers and saw the parts in yellow. I tried to update the driver but all I got was Code 18 error and this weird message in the picture. I clicked on properties and saw this message.





Quote:
The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.




I am stumped. I've tried uninstalling, re-installing, installing other Bluetooth drivers, waving a magic wand, none of it has worked. I'm thinking it's a problem with the Registry, but I am not sure how to proceed.

Any ideas?

A:Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Give this a try. It's free.
https://www.slimwareutilities.com/slimdrivers.php
You do need to resolve those Other devices category issues.

Read other 1 answers
RELEVANCY SCORE 86

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

Read other 6 answers
RELEVANCY SCORE 86

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

Read other 2 answers
RELEVANCY SCORE 86

I am having the typical black screen. I just want to see if anyone has a resolution to the problem before I have to spend money for a new one. I checked everywhere before I posted for help.

Thanks in advanced. Joe D.

Read other answers
RELEVANCY SCORE 85.2

Just got this result. What does this mean??Thanks!

Read other answers
RELEVANCY SCORE 83.2

Error Code C00D1199 (aka: code 80040265) is an error message that can be displayed in several different ways and can be worded different as well, but it all refers to this error message originally posted as message 80040265.

There were a few posts on here about them, but many of the threads seemed to be closed. I just noticed that I have gone through all of the motions and really tried, but no pickle here....well, there might be a pickle, but it is the kind of pickle you get stuck in and is not cool whatsoever.

Here is what I have done:

1. Made sure that the format was supported with windows media player. It was, as it is an .avi, so no problems there.

Here are the types that are compatible:
.au and .snd
.aif, .aifc, and .aiff
.cda
.vob
.jpg
.swf
.dvr-ms
.mp3 and .m3u
.mpeg, .mpg, .m1v, .mp2, .mpa, .mpe, .mp2v, and .mpv2
.mid, .midi, and .rmi
.avi and .wav
.asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx
.wmz
2. I made sure that other .avi's I have in my collection were working properly with the WMP (Windows Media Player). They were, just not the ones I was trying to fix, of course..

3. I made a sandwich and drank some Yoohoo.

4. Installed a sturdy set of codecs with DivX to ensure that that was not it. I know I had to do it before, but I recently cleaned and started my PC from scratch again, so the previous codecs were not there.

5.Made sure all of my audio devices and drivers were updated and installed properly-for the most part-which I ... Read more

A:Error Code C00D1199 (aka: code 80040265)

Welcome Miss Haley, have you read through some of the suggestions here? They seem to have some detailed info on the error code C00D1199 (aka: code 80040265)
http://www.updatexp.com/c00d1199.html

I use the free "Jet Player" and love it - whether it's movies or music - there's not much it won't play or burn, (runs circles around WMP)
http://www.jetaudio.com/download/
Hope this helps
 

Read other 1 answers
RELEVANCY SCORE 83.2

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7
Greg

Read other answers
RELEVANCY SCORE 83.2

Admin password or power on password1st is how do I disable it all together?2nd thing I need system disable code # 54575104

A:System disable code error code

@Shuwat66? Please enter            41453120 Regards.

Read other 2 answers
RELEVANCY SCORE 81.6

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

Read other answers
RELEVANCY SCORE 80.8

my dell inspiron 1520 start give problems. after PSA diagnostic i have got error code 0146. message: error code 2000-0146. unit 1:dst log error. what does it means? what do i need to do next? many thanks

A:error code 0146, message error code 2000-0146

Hi,
Had this same problem on Inspiron 1545.  Just wanted add what I did that seems to have solved the problem, I'll let u know if it stops working again.  Will be posting this elsewhere as well.
Got started on this link: 
http://www.pcguide.com/vb/showthread.php?p=460856  
Laymans: 
I booted off the dell OS disk by pressing f12 at startup and selecting CD-rom/DVD. 
After files load, Click repair OS instead of Install. 
Click Command Prompt.  Type C:\   Hit Enter
Type in chkdsk     Hit Enter
After chkdsk runs, If you have the same problem I did, it will say unable to repair in read-only mode.
on C:\, Type chkdsk/r
It will prompt you that all handles will be invalid, type y and press enter.
chkdsk fixed my problem, Reboot by typing exit and press enter.  
Start Windows Normally.
 
Hope this helps, def post again if it happens again.
 
 

Read other 16 answers
RELEVANCY SCORE 80.4

IN my Dell Inspiron 1520 , whenever I start my laptop I get the message "Internal hard disk drive not found.To resolve this issue, try to reseat the drive.No bootable devices -- strike F1 to retry boot, F2 to set up utility.Press F5 to run on board diagnostics."
 I ran onbiard diagnostics which showed following:error code = 0141msg error code = error code 2000- 0141msg : no drive detectedI also opened the Hard Drive by removing hard drive screws to reseat the drive and put it back again as it was there intially.But when i started my Dell Inspiron 1520 , I get the same message -- "Internal Hard Disk Drive Not Found TO Resolve This Issue, Try TO Reseat The Drive" came.Please help me in this.

A:'ERROR CODE:0141, MSG ERROR CODE: 2000-0141, HARD DRIVE:- NO DRIVE DETECTED'

Hi, the errorcode speaks for itself, the system can't find the hard drive, i suggest you try plugging it into an desktop system as salve to try and save data, but if it is not found there either you will have to buy a new hard drive/get one on the warranty.

Read other 25 answers
RELEVANCY SCORE 80

i need help fixing these 2 error codes 28 and 80070103

Read other answers
RELEVANCY SCORE 79.6

d version of windows 10"?
socan u please help me....
My code is:
package First;

import org.openqa.selenium.WebDriver;
import org.openqa.selenium.edge.EdgeDriver;
import org.openqa.selenium.edge.EdgeOptions;

public class Demo {


// TODO Auto-generated method stub
public static void main(String[] args) throws InterruptedException {
// TODO Auto-generated method stub
System.setProperty("webdriver.edge.driver", "C:\\Users\\Ganesh\\Downloads\\MicrosoftWebDriver.exe");
        WebDriver driver = new EdgeDriver();
        Thread.sleep(5000);
        driver.manage ().window().maximize();
        Thread.sleep(5000);
        driver.get("https://www.goair.in/");
        Thread.sleep(5000);

}

}

Read other answers
RELEVANCY SCORE 76

My System :
Windows XP Professional
Intel core 2 duo CPU T8100 @ 2.10GHz
1,99 gig of ram
Mobile Intel GMA X3100

My system sometimes restarts both in and out of games and so far have left these 2 events both 1003 and mini dumps as follows:

Event ID: 1003, Category: 102, Source: system error.

Error code 000000f4, parameter1 00000003, parameter2 87f91020, parameter3 87f91194, parameter4 805d297e.

Please help me, don't know what to do!
 

A:Random restarts -event id 1003 -system error- error code 000000f4

Your error is 0x000000F4: CRITICAL_OBJECT_TERMINATION
One of the many processes or threads crucial to system operation has unexpectedly exited or been terminated. As a result, the system can no longer function. Specific causes are many, and often best resolved by a careful history of the problem and the circumstances of the error message. One user, who experienced this on return from Standby mode on Win XP SP2, found the cause was that Windows was installed on a slave drive


The driver citted is crsss.exe and is an important part of your Windows OS.


See this link and read #2 to get some idea f what this driver does: http://www.liutilities.com/products/wintaskspro/processlibrary/csrss/


* It might pay you to do a security scan with your antivirus, etc.
 

Read other 1 answers
RELEVANCY SCORE 76

Help, can't print anything and can't find out how to fix that error code

A:Printer Spooler has a error message <Failed to Read Description. Error Code: 193 >

Hi, go to start search and type:- cmd, right click on the returned cmd.exe and select "run as administrator" at the prompt (copy paste)


Code:
sc queryex spooler > 0 & notepad 0
(press enter) I am guessing we will see error 1058.

Next still at cmd type:-


Code:
net start > 1 & notepad 1
(press enter)

Please post both notepad entry's here.

Read other 4 answers
RELEVANCY SCORE 76

no matter how many times i clean the drive it will still come up with this error. i can't figure out what is going on. i am able to convert the movie just fine but when it comes times to write to blank dvd, it won't do it. this is the problem i am having on my laptop which i will include the log. for some reason on my pc the program convertxtodvd doesn't even acknowledge that i have a dvd drive , i believe it is the pcouffin, which i have uninstalled and reinstalled but i cannot get it to work. it says it is working fine but device no longer available. well here is the log from my laptop which will convert but will not finish the copy.

2/20/2008 1:29:47 AM info ********** Report session closed ***********
2/20/2008 1:29:30 AM error BURN: Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2/20/2008 1:28:14 AM info BURN: Write started 894784 sectors to write
2/20/2008 1:28:14 AM info BURN: Writing speed requested x4.0, effective x4.0
2/20/2008 1:28:13 AM info BURN: Available write speed: 8x, 6x, 4x, 2.4x
2/20/2008 1:28:13 AM info BURN: Media ID: SONY-D21-00
2/20/2008 1:28:13 AM info BURN: Media type: DVD+R
2/20/2008 1:28:13 AM info BURN: Multiword DMA Mode 2
2/20/2008 1:28:11 AM info BURN: Scanned files #8, folder #2 - total size 1831393280 b. (1.71 Gb.)
2/20/2008 1:28:11 AM info BURN: Inserted media type : DVD+R
2/20/2008 1:28:11 AM info BURN: Write started
2/20/2008 1:28:10 AM info --------... Read more

A:Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burne

Replace the laptops burner... Laptop/notebook CD/DVD R/W's are very delicate and are more subject to failure than desktop writers
 

Read other 3 answers
RELEVANCY SCORE 76

During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E':

'The backup operation that started at '‎2015‎-‎12‎-‎20T06:00:25.459859400Z' has failed with following error code '0x8078012D' (The operation failed due to a device error encountered with either the source or the destination. If the source or destination volume is on a disk, run CHKDSK /R on the source or destination volume, and then retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.'

I ran CHKDSK \R and received several errors of the type: 'A disk read error occurred 0000185. The disk does not have enough space to replace bad clusters detected in file xxxxxx of name xxxxxx.'

My 'E' drive is 2TB with 205GB free. I really don't believe that the cluster(s) in error are bigger than 205G, but what do I know?

Anyone have experience with this problem?

Thanks.

Read other answers
RELEVANCY SCORE 76

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

Read other 1 answers
RELEVANCY SCORE 76

Hello I keep getting this 3 errors (Error Code 0x8007042c, Error 1068 and (-5001 : 0x80070002), after installing:

Update for Windows 7 for x64-based Systems (KB2607576)

and

Update for Windows 7 for x64-based Systems (KB2603229)
Although both updates installed successfully I keep getting this errors since today when I installed those updates here are some pics:

http://i1178.photobucket.com/albums/...ewallerror.jpg

I cannot start windows firewall

not even from here

http://i1178.photobucket.com/albums/...artuperror.jpg

and I can't install games either

http://i1178.photobucket.com/albums/...stallerror.jpg
Help me please Is my computer ruined? I will provide all the information you need but please help me fix it I couldn't find any solutions on Google so please help me, I'm begging you

I cannot do a system rollback since it says there were no restore points but I could do a rollback before, I've uninstalled those updates also but the problem persist

A:Error Code 0x8007042c, Error 1068 and (-5001 : 0x80070002) after insta

Anyone? I'm really scared by the fact that my firewall does not work That means my computer is vulnerable

Read other 9 answers
RELEVANCY SCORE 76

i have been having some troubles with my printer lately [Canon Pixma iP1800]
and i have been trying to enable "Printer Spooler" i went into services.msc and tried to fix the problem but came back with negative results Failed To Read Discription Error Code: 2) i later referred to Eric01's thread for further help for regedit (HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\CONTROL\PRINT\
i have found all original files mentioned in that thread with no extra files.
I have also tried to find any files within C:\Windows\System32\spool\PRINTERS and to delete anything in there.

So far i have had no luck and a report due soon.Please Help!!!!

System Specs : Windows 7 Ultimate 32x/4GB Ram/

BTW READ: in services.msc it does not read Printer Spooler but just Spooler
 

A:Printer Spooler Error (Failed To Read Discription Error Code: 2)

Read other 8 answers
RELEVANCY SCORE 76

I’ve tried a whole bunch of different things to solve this error -
‘an error occured during DirectPlay Voice Setup. the error code is 0x8015017’

I’ve tried the DPVsetup.exe fix

RESOLUTION
This problem generally occurs only the first time that you run the test. If this problem continues to occur after the first attempt, follow these steps:
1. In Control Panel, double-click Sounds and Audio Devices.
2. On the Voice tab, under Voice Playback, click Advanced.
3. On the Performance tab, move the Hardware Acceleration slider at least one position to the right.

I’ve installed 2 different files..

And still the tick remains on Mute against the microphone?? I can hear sound through the mike but cannot activate it?? Can anyone help?
 

Read other answers
RELEVANCY SCORE 76

When attempting to install MS Office 2010 (also applies to Pro, Beta, and 2007) via download, you may be foiled by Error code 25004 and System error 1073418460 under Win 7 (or Vista, XP). You may also see a refusal to verify the license. This typically happens when you fail to uninstall Office 2010 Starter, Office Click, or some other version of Office before attempting to install the new Office. You would think MS had already figured out how to prevent this <sigh>.

You need to remove all the instances of Office in order to properly install the new office. However, you may also find that the Windows uninstall from Control Panel, Add or change a program will fail to remove the old Office.

This thread can be helpful, although it is somewhat dated. The RevoUninstaller sounds like a successful utility, but I have not tried it myself.
http://forums.techguy.org/business-applications/1034399-cant-uninstall-office-2010-a.html

I found this MS KnowledgeBase article appropriately addresses the removal problem
http://support.microsoft.com/kb/290301
Work your way through the methods, starting with Method 1. I was disappointed to see that the MSICUU2.exe was discontinued and found its replacement, Microsoft FixIt, was ineffective. I had to go with Method 4, which is a manual tearout.

Save a copy of the Registry before monkeying with it as it is easy to accidentally delete a wrong key. A manual tearout is tedious, but you do not have to eliminate all the indicated quids {bunchof... Read more

Read other answers
RELEVANCY SCORE 76

We are running Windows XP and get an error code upon booting up that says, "Setup error encountered during installation - Error code 000D". I normally go to the web to find assistance, but can't seem to find an answer this time. Most ask if I have a file called "Creator" or Roxio products installed on the computer. I have searched for these files, but haven't found any. I do have a SONIC program. And I do have Creative MediaSource, but I don't think these are the same. Any ideas? Any help would be greatly appreciated. Thanks.
 

A:Solved: Win XP Error - Error Code - 000D: Encountered Prob Dur Install

Read other 8 answers
RELEVANCY SCORE 76

I was given an HP Compaq Presario C500 that was headed for the garbage because it would not connect to the internet. After running several scans ESET online scanner came up clean. Installed Microsoft Security Essentials and installed SP1, and can't get it to install SP2. I keep getting error code 80070017 / Windows Update encountered an unknown error.

I would prefer to reformat but Recovery Manager restarts back into Windows and I have no disks.

Can provide a long list of what has been done if needed including WU Modules (Normal Mode) and WU Components fixes. Permissions point in every which way but the correct way!

Any help would be much appreciated!

Free space is presently @ 42.3 GB of 68.9 GB on C: Drive (started out with 7.3 GB's free space! )
and 4.91 GB free of 5.53 GB on Presario_RP (D)

Specs as follows:
Vista Home Basic
Intel (R) Celeron (R) MCPU
[email protected] 1.60GHz 1.60 GHz
512 MB RAM
32-bit OS
Denied access to the CBS folder itself though can access CheckSUR.log which I am including along with sfcdetails.

=================================
Checking System Update Readiness.
Binary Version 6.0.6001.22375
Package Version 5.0
2010-10-04 19:57

Checking Deployment Packages

Checking Package Manifests and catalogs.

Checking package watchlist.

Checking component watchlist.

Checking packages.

Checking component store
Summary:
Seconds executed: 2478
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.224... Read more

A:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Dow... Read more

Read other 49 answers
RELEVANCY SCORE 76

Help I need assistance solving this problem.

When installing Windows 2000 setup copies the initial files to the hard drive and then restarts to begin the 1st stage of setup.

The system begins the startup process by "Loading the Windows Executive" At this point setup stalls and gives the following message:
"Setup cannot load ntkrnlmp.exe the error code is 16"
This error is duplicated in different releases in win2k from the beta 3 to the final releases.

Please assist, respond to [email protected] or ICQ 1937432
 

Read other answers
RELEVANCY SCORE 76

I'm running a Windows XP Pro system, 2gb good RAM, AMD Athlon 64 3500+, nVidia GeForce 9800 GT. I attempted to install a copy of Oblivion (which I have had and used many times in the past). The disk is in very good condition, and can be used on another machine. I have tried it on multiple drives for this one PC, but now, it will not complete the loading of the InstallShield Wizard. It gives me this error:

Error Code: -5006 : 0x80070001
Error Information:
>SetupDLL\SetupDLL.cpp (1194)
PAPP:Oblivion
PVENDOR:Bethesda Softworks (http://www.bethsoft.com)
PGUID:35CB6715-41F8-4F99-8881-6FC75BF054B0
$11.0.0.28844

I have searched for a solution online, but have not found one that works yet. Any suggestions?
 

Read other answers
RELEVANCY SCORE 76

Here's my story:

My sister's PC had been corrupted in lots of unnecessary programs and apps.
I deleted those craps. Windows Action Center then prompts me to update my windows, and I did.
PC restarted and POOF!!!, I am seem to be forever stuck in the Startup Repair Loop.
So I tried System Restore, but it's giving me the error code stated above (error 0x80070003).
I also tried System Image Recovery, and it's not also of help. Also, checking Hardware Options didn't help.
Lastly, I tried the Command Prompt option and it gives me nothing.

So how can I possible fix this error? ((

thanks in advance for those helpful respondents ))

A:Startup Repair Error (Forever Loop) Error Code 0x80070003

Hello Cath, and welcome to Seven Forums.

You might see if the tutorial below may be able to help with this.

Startup Repair Infinite Loop Recovery

Hope this helps,
Shawn

Read other 2 answers
RELEVANCY SCORE 76

Hello again, BSOD Forum,

I've been free of frequent BSODs since earlier this year. Recently I must have installed some software or something else must have gone wrong, because the blue screens are back.

Here is what happened earlier this year, in case anyone needs any further context:

Several BSODs following power outage. Varying BCCodes and frequency.

There isn't any specific behavior or action that triggers the crashes. I was listening to Spotify and browsing the internet with Chrome on the most recent crash. Also, I seem to be having trouble installing a security update from Microsoft (Security Update for Windows 7 for x64-based Systems (KB2892074)). I've tried using the "Update Readiness" tool supplied by Microsoft, but it doesn't seem to be working. It only asks if I want to install some hotfix instead of the security update that keeps failing. Not sure if these two things are related, just thought I'd throw it out there in case anyone has had experience with this issue.

Attachment 297074

Aside from that, virus scans have been clear. MSE does nightly scans (I believe), and its definitions are constantly up to date.

Attached are the SF zip files. The last crash I got was a Memory Management error. I will run Memtest86 tonight and post the results tomorrow morning. If anyone sees anything of interest in the dumps please don't hesitate to let me know.

Attachment 297071

Thanks in advance,
Jeremy

A:BSOD Memory Management Error, didn't catch error code.

Not happy to see you again with the issues, RaptorBuddha.

Display drivers are failing. Install and try the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Atheros network driver is failing, too. Update it from ATHEROS drivers for Microsoft Windows (Atheros?????), matching your devices model number.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

Edit: The msinfo32.nfo file is corrupt..... upload it again for any future need.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it w... Read more

Read other 9 answers