Over 1 million tech questions and answers.

Screen wont turn up after bios installation ideapad 310

Q: Screen wont turn up after bios installation ideapad 310

Hi,So just last day i had some blue screen on my pc cuz of some problem so i tried to reinstall the windows and i install a windows 7 x64 without problem and then i tried to install drivers all drivers were fine but when i started to install the BioS.when i started to install bios i just let the installation Goes and i go to eat something and when i went back i hear a huge fan sound and screen turn down and everytime i turn it on its just like that again huge fan sound and no screen shows up and even i tried and put the battery down and started without it but still no screen turn up no boot no bios just black screen and huge sound of fanif there is a solution i will be so happy to hear it ThX <3

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Screen wont turn up after bios installation ideapad 310

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 72

Hello, Im new to forums so please bare with me.
My problem started when i dropped my cellphone on my Envy m6 1160la. The screen froze and i started hearing a feint beeping sound. I left it like that for a while, since i could turn the leds on and off. After it failed to work again i turned it off only to turn it back on and be greeted with the same feint beeping sound and no hp logo or loading. After a while the phrase "Checking media" "fail" would come up twice and then a blue box that would say something and then turn off my computer. I changed the HDD and the beeping stopped but the same thing happened. I turned off secure mode but then it said i needed to install an OS and something about 3fo hardrive. I then tested both hardrives and the one that gives me a beeping sound approves the memory test but fails the dst short and long and the smart (dont know what this is), and the one without the beeping approves all. Now after all this I came ro the conclusion that me HDD was bad and that i had to install a new OS on another one (dont know if i was right) but since the HDD that wasnt beeping ran on win 7, I thought if i changed to legacy i would be able to boot up my computer. After i changed it it restarted and i could hear the HDD spinning and the fan and leds would turn on but the screen wouldnt and wont. Any help on my current and previous problem would be much appreciated.
 

A:My computer screen wont turn on after changing BIOS

Likely not completing POST. Clear the CMOS (which will change the BIOS back to default), and try booting again.
 

Read other 2 answers
RELEVANCY SCORE 64.4

My 4 month old Ideapad 130-15IKB didn't turn on (with and without power - no response at all), so I sent it the local lab support (under warranty). I wan't satisfied with the answer I got about the problem - "The battery was over-charged" - they just opened the laptop, pulled out the built-in battery and put it back. after 2 months it happend again and i sent it to local lab support again they change the battery and yesterday the problem happend again.what is the problem?

Read other answers
RELEVANCY SCORE 64.4

My lenovo laptop will not power up!! I just got it in march and This morning i unplug it and when i press the power button it lights up for about 2 seconds then shuts off again i dont know what to do i dont want to lose it. It was alot of money please help me fix this problem.Thanks

Read other answers
RELEVANCY SCORE 64.4

Hi,My ideapad wont turn onI was using it just last night and today it wont turn on ( i'd press tge power button and it wont do anything )I connected it to the charger but all that it would do is light up the charge indicator.I'd like to get it fixed. Thank you, Jazzmin G

Read other answers
RELEVANCY SCORE 64.4

I bought  lenovo ideapad 100s but  it wont  turn  on.. i chrged it and light on. But  when i pressed  the  power  button  still  dont  come up.  Please help  me.  Thank you
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other answers
RELEVANCY SCORE 64.4

Hi, I have had my Ideapad for about a month now and it doesnt seem to turn on. The white charging LED is on when connected to A/C and I can hear the fan come on, the screen flickers when i press the power button, but then after a minute or so everything powers down before I even make it to the lenovo or windows login screens. No sign of bios. I have read somewhere that i could try to take out the battery and start up the laptop without it, to try and clear static charge, but i'm not keen to take it all apart before I get some advice! James

Read other answers
RELEVANCY SCORE 64

Synopsis: PSU died, replaced PSU with different model, system boots to bios successfully but does not recognize any devices in SATA ports, nor do those devices appear to be getting power. Now can't even get to BIOS, entire PC flicks on and off repeatedly as soon as I turn the PSU on regardless of whether I hit the power button on the front of the computer.

System Specifications

Original PSU that died: SeaSonic M12II 750 SS-750AM 750w PSU
CPU: Intel Core i5-3570K Ivy Bridge 3.4GHz
GPUs: ASUS 670 non-top version, SLI (2x)
MOBO: ASRock Z77 extreme 6
RAM: Mushkin Enhanced Blackline 8GB (2 x 4GB) SDRAM DDR3 2133
Optical drive: Sony AD-7280S-0B 24x SATA Internal DVD+/-RW Drive
SSD: SanDisk Extreme 240GB SATA 6.0 Gb-s 2.5-Inch (OS is installed here)
Storage drive: Western Digital Caviar Black 1 TB SATA III (This was not connected when power supply died)

Detailed explanation:About a week ago my PSU (Seasonic 750w) died randomly while the computer was left running in sleep . I RMA'd the dead seasonic. In the mean time I happened to come accross an extremely good deal on a new PSU, so I bought it (Thermaltake smart m850w PSU) to have a backup and to get my machine working again.

I hooked up the new PSU to GPUs, CPU, fans, ATX power connector, and to all of the SATA devices, (the SSD, the HDD, and the Optical drive). I made sure to connect the data cables to the SATA devices in the same configuration they were in when working properly. The computer boots suc... Read more

A:PSU died, new PSU, bios wont recognize SATA devices, now wont turn on

I had a similar problem when I had an Antec PSU die on me. After I replaced it, my Biostar mobo's BIOS would no longer retain settings, and both my Pioneer DVD burners were completely dead. Not recognized in the BIOS, they would not acknowledge any discs inserted, nothing worked. I also started getting BSODs pointing to a corrupt BIOS. Replacing the burners didn't help. Putting the Pioneer burners in a new machine didn't work.

It turned out that the dying Antec PSU had wrecked the Biostar's BIOS chip and both Pioneer DVD burners. Replacing the BIOS chip was more expensive than buying a new motherboard, and reflashing the chip wasn't possible because the flash utility told me I already had the latest BIOS version. I ended up trashing the board and buying an ASRock board and Samsung burners.

If you get a new motherboard (or try another known-good working PC), and you connect your present SATA devices and they don't work, then the dying Seasonic may have burnt them out, too.

Read other 9 answers
RELEVANCY SCORE 63.6

I googled for some time and could find solutions without using screw drivers as this has built in battery. I got this laptop like a month ago. its working fine on day 1 but the following days, I cant turn it on without using charger even though the battery is 100% charged. When on battery, it wont turn on. Then I plug in the charger and tried to turn on but it wont start. The plug in light is on. And I would need to wait for around 30 minutes to try to turn on again. When turning on it would show something like this. Sometimes, the screen would blink in dark green and I can hear the starting up sound repeatedly but it just wont start. Anyone can help with solutions without the need to open the laptop as I have no clue to do that? Thanks in advance

Read other answers
RELEVANCY SCORE 63.6

Here is a video that details better the behavior of the laptop, all it does flicking in the screen, wont boot up windows at all.

Read other answers
RELEVANCY SCORE 63.6

Hello,  After 4 and a half months of not being able to use my laptop, I'm getting very frustrated about my brand new lenovo laptop. I bought my lenovo ideapad 700 in Germany in August (240V). I left in September for a year abroad in Japan and used my laptop on the first few days until the battery went down. After that I tried to turn the laptop back on again but nothing worked: no lights, no reaction, nothing. I was using an adapter to conevert the voltage of Germany to japan's voltage (100V). I tried with different chargers, adapters - I tried everything. I even went to a computer store here in japan but even the guy in the computer store did not know what was the problem. I also tried to unplug the battery (from the motherboard, I didn't actually screw it out) and held the power button for at least 30 seconds and tried to turn it on again - still nothing. I tried everything I could think of and with everyday, my frustration and disappointment in lenovo gets bigger. Please, I just want to use my laptop, help me..  Desperate regards,Robin 

Read other answers
RELEVANCY SCORE 63.6

My ideapad z510 shows 0% avialable plugged in charging.. and goes off immediately I unplugged it.. I have tried another battery still won?t work .. what do I do please ?

Read other answers
RELEVANCY SCORE 63.6

Can anybody help me? Same problem here. I have just bought my first lenovo for my client ordering. When in the store they tested it all fine. But when I came home it cannot be turned on. I am very regret buying this stupid laptop!!!!! How can I give to my client a broken one??!! And who will believe there is any laptop broken on the first day??!! please help to solve this issue. I have tried all the solution and cannot found any resolution
 
Mod's Edit: Moved this post to its own thread and updated Subject line.
 

Read other answers
RELEVANCY SCORE 63.6

I was taking a 40 day break from my computer ending on Sunday, put it in the basket. I was going to test the bootup, and when i push power, no light turns on. When i plug the adapter in, i hear a very quiet buzz noise from inside the computer, and i push the power button, still nothing happens, no lights, no boot. Is my computer dead or what? I just got this for Christmas. Is their a way to fix it, i hear taking the battery and unplugging the adapter and holding the power button for 30-60 seconds works on some Lenovo models, but the battery is not accessible without me having to mess with screw drivers. I want to have a good working lenovo. Should i mail this in to Lenovo, or is their a way to fix manually. -Isaac Schaff

A:My Computer WONT TURN ON!!! (IdeaPad 100s)

Hi Isaac,
 
Welcome to Lenovo Forums.
 
When you plug in the power cord the light for the AC adaptor doesn't turn on?
 
Hope this helps. Let me know your findings.
 
Regards,
Shashi
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

Read other 8 answers
RELEVANCY SCORE 62.8

I have an older Ideapad z570, it made a popping sound and it won't power up now either.  I ordered a replacement adapter from lenovo thinking that was the issue as the light on the adapter was not coming on when it was plugged in.
 
After reading some of these boards, it appears I might have an issue with the mother board.  I would like to see abou getting it replaced, but there are no repair centers close to me, and I cannot find any information on Lenovo's webiste as to who I can contact or where I can send it.
And information to this end would  be greatly appreciated.  Sorry to tack on to this thread, but seemed silly to create another one for the same issue.
 
Thanks,
 
Mod's Edit: Since your issue involves a different model it was moved to its own thread in the correct forum in the Lenovo Z series notebook.
 
 

A:Lenovo ideapad Z570 wont turn on! Nothing works!!

Welcome to the Lenovo Community !
 
Sorry to hear of the problem you are experiencing.  You can contact Lenovo Support at the phone number I have listed below or visit a local Best Buy store.  Most Best Buys are authorized Lenovo repair centers and they should be able to assist you.  Since your warranty is probably expired,  you can also take your laptop to any repair center that a friend or family member may recommend.
 
Lenovo Support - USA1-877-453-668624 hours a day 7 days / week

Read other 1 answers
RELEVANCY SCORE 62.8

hello everyone, I am hoping someone can help me with my laptop situation. Its a Lenovo Yoga 900-13ISK Laptop (ideapad), I have had it for 3 months. I shut it down Saturday and then minutes after the display had gone off I noticed the power button light was still on. I tried to restart it and no response. pressed for long trying to shut it off (this works on my Lenovo thinkpad from work) and still no response. Its now been almost 48 hours the power button light is still on and machine wont start. The machine has not been connected to charger since saturday shutdown. Since the battery is encased in the laptop I cannot open it without voiding the warranty. I bought the machine in US and because of work I am now in Europe cannot take it back to Lenovo US. Anyone have a solution for me?

Read other answers
RELEVANCY SCORE 62.8

Plss.help my lenovo ideapad 110-14ibr wont turn on after the battery ran out.

Read other answers
RELEVANCY SCORE 62.8

Plss.help my lenovo ideapad 110-14ibr wont turn on after the battery ran out.

Read other answers
RELEVANCY SCORE 62.8

hello everyone, I am hoping someone can help me with my laptop situation. Its a Lenovo Yoga 900-13ISK Laptop (ideapad), I have had it for 3 months. I shut it down Saturday and then minutes after the display had gone off I noticed the power button light was still on. I tried to restart it and no response. pressed for long trying to shut it off (this works on my Lenovo thinkpad from work) and still no response. Its now been almost 48 hours the power button light is still on and machine wont start. The machine has not been connected to charger since saturday shutdown. Since the battery is encased in the laptop I cannot open it without voiding the warranty. I bought the machine in US and because of work I am now in Europe cannot take it back to Lenovo US. Anyone have a solution for me?

Read other answers
RELEVANCY SCORE 62

My lenovo ideapad s110 won't turn on when i press the power button. But when I press the quickstart button it powers on. And this only happens when I do not have the battery adapter plugged on. When it is plugged the power button works. WHat could be the problem in here?













Solved!

Go to Solution.

A:Help!My ideapad s110 wont turn on if I press the power button

Hi 
 
Welcome In Lenovo Forums
 
I would recommend if you can follow the below steps and i hope the issue will be solved 
 
1- power off the machine and plug out the battery and connect the charger 
2- hold the power button down for 15 sec
3- turn the machine on from the power button in any condition and test if it fixed or not
 
Please let me know if the issue still exist 
 
Thanks
Alaa





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 6 answers
RELEVANCY SCORE 62

The screw for my RAM cover is stuck and wont turn... Also is there 1 slot in this system or two, because somewhere it says there are two slots one with a soldered 4GB stick in it, and an empty slot... other sources say there is only one slot...  

Read other answers
RELEVANCY SCORE 62

i sent my lenovo ideapad 100s- 11IBY in to the lenovo repair center for a diffrent preblem and it got fixed but ever scence i got it back it died and wont charge.

Read other answers
RELEVANCY SCORE 62

Hello everyone  This morning I've updated my BIOS (MIIX 310cWindow 10) after telling BIOS update failed It won't turn on, I push power Button nothings to happen, screen stay dark! The battery is fine! please help me!   

Read other answers
RELEVANCY SCORE 61.6

my lonove idea pad 100-15IBY JUST WONT TURN ON, there are 2 lights flashing on the laptop indicating that it is in sleep mode, when i plug the charger the charge light indcates that it is charging. if i press the power button the light goes into a solid state for a few seconds and then it just goes back to flasing again. i have have removed the internal battery hoping it will reboot nothing, i have tried to use the one key recovery button located on the side, but nothing. i have removed rams, CMOS BATTERY BUT NOTHING.  the laptop is out of warranty and i rally need it to work, i am a student and dont have much money to fix it, i use this laptop on a daily basis and my work is now stuck on it pls help...

Read other answers
RELEVANCY SCORE 61.2

Hello everyone, I changed the UEFI settings in the BIOS and can not run windows and get into bios(black screen, and nothing happens). Is it possible to install the BIOS from Bootable CD ? i have found only .exe file in the drivers page. Now bios version is: 2wcn21ww  Regards,Peter

A:Lenovo ideapad 310 -15IKB BIOS INSTALLATION

Your BIOS is only updateable through the windows platform.Are you stating that you can not get into the BIOS settings?  Page 27 of the user guide shows how to access BIOS setup, using the Novo button, from a POWERED DOWN machine.https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/v310_14isk-15isk_ug_en.pdf

Read other 2 answers
RELEVANCY SCORE 61.2

Hello everyone, I changed the UEFI settings in the BIOS and can not run windows and get into bios(black screen, and nothing happens). Is it possible to install the BIOS from Bootable CD ? i have found only .exe file in the drivers page. Now bios version is: 2wcn21ww  Regards,Peter

Read other answers
RELEVANCY SCORE 60

My laptop wont turn on it keeps telling me i need a windows installation disc but my laptop didnt come with it. i have had this laptop for a good while and the charger got a little torn so i didnt turn the computer on for a good time. now that im trying to turn it on it says there might be a windows update that needs to be updated but then it tells me i need a windows installation disc for the update or repair to even do what it need to. so if anybody can help that would be much appreciated.

A:Laptop wont turn on unless i put a windows installation disc...

This is a little hard to understand. You say it will not turn on yet it is telling you something? How and when? What version of Windows is on it? Take us through the sequence of what happens when you power it on. Does it boot up and can you log into Windows? 

Read other 8 answers
RELEVANCY SCORE 59.6

After the bios update was finished, it requires to restart but it wont turn on again after restart. The light when put charger in also wont turn on.Any solutions will be appreciated. Thank You

Read other answers
RELEVANCY SCORE 58.8

I was having trouble woth my wifi adapter so did a scan for updates need per hp assistant did the first update and now my computer won't turn on. It sounds like it is but the screen is black
 

A:Bios update bow computer wont turn on

Hi Brrlrcr97, and welcome to TSG.

Exactly what do you mean by "won't turn on"? Do you press the power button, it makes some sounds, and then completely shuts off?

Are we safe to assume it is an H-P/Compaq brand computer? If so, please give us the full model number of it (not just the model series).
 

Read other 5 answers
RELEVANCY SCORE 58.8

Hello,
Recently, my computer seemed to have crashed. It would randomly shut off while i was away and eventually never turned back on. At first it would just keep rebooting, then i would get a blue screen finally to the point where the power button on the machine did nothing, the fans wouldnt even move.
I had an Asus P4S533 motherboard and a P4 2.0 running on XP.
I tested the PSU and it was fine, tried another video card..nothing.
So i figured the MB was shot, so I bought a Giga-byte GA-8VT800.
Using the same processor on the new MB, I turned on the machine only to have it freeze in the BIOS sequence.
It froze at the point where it recognizes the CPU and it gave me this message and then it froze:
Health OK
Main Processor Pentium 4 2.66
CPUID: 0524 Patch ID:001E

...at this point it would freeze and i could do nothing.
My processor is NOT a 2.66 but a 2.0....
Could my CPU be fried also?
Someone please help me out...im getting frustrated
Thanks!
-Matt
 

Read other answers
RELEVANCY SCORE 58.4

My Y580 orginally displayed screen notifications for changes in NumLock and CapLock, but now only the status lights work.  How do we turn the screen notifications back on?  I don't know why it stopped working.  

Read other answers
RELEVANCY SCORE 58.4

Hi, I have an Lenovo ideapad 710S13IKB Product Number:80VQMy computer is plugged to AC adapter most of the time and I disabled the "sleep after" option in the Power & Sleep settings I configured that only the screen will turn off after 10 minutes. My problem is that after couple of days of work, when I am trying to wake the computer after not working on it for couple of hours nothing happened, the computer does not respond (mouse, keyboard), Only shutting down the computer and turning it back on allows me to come back from the issue.I also installed chrome remote desktop and when the computer does not respond I see that the computer lost connection and there is no way to remote control my computer.  Please help,Thanks!

Read other answers
RELEVANCY SCORE 58.4

Hey guys
I have a problem with my laptop especially the BIOS, I set up a wrong setting in the BIOS and now the laptop just turn on and then turn off immediately with a black screen, I only able to hear the fan in a second then turn off again.. I would like to know how can I revert back the BIOS setting to it's factory setting?
Thanks in advance

A:Wrong BIOS setting laptop wont turn on

Enter you BIOS, select Exit, and choose Load Default Settings.

Read other 16 answers
RELEVANCY SCORE 58.4

My PC/Monitor was working before but I forgot to connect my hard drive to my power supply. So after I connected the power cord from my hard drive to my power supply, I turned on my Computer and my Monitor. Unfortunately, when I turned both on, my Monitor said "No Signal" on both HDMI 1 and 2. I don't know if I accidentally damaged a part or knocked something out. I just need to know what parts affect video/visual and potentially how to fix the problem.
 

A:PC can turn on but my BIOS menu wont display on my monitor

Generally it's anything video related, like a graphics card or the motherboard's onboard video.

The first rule is generally to do a bare boot.

Pull out all but one stick of RAM and any other add-in cards you may have. MAKE SURE THAT THE ONE STICK OF RAM YOU LEAVE IN NEED TO BE IN THE CORRECT DIMM SLOT FOR ONE STICK. They are usually number A1 A2, etc. Check your motherboard manual for your correct configuration.

It would also help greatly if you can post a full list of your computer's SPECIFIC specs.

Pull out the motherboard CMOS battery and unplug from wall power, if you haven't done so already. Push the power button and hold it down for about 45 seconds.

Reinsert the CMOS battery and the wall power plug. Try to boot...any picture?
 

Read other 1 answers
RELEVANCY SCORE 58

Hello, so I bought a lenovo ideapad 100-15IBD about a month ago, and it has been working fine until today when my screen wouldn't turn on. I turned my laptop on and the fan starter working but the screen was still black. Last night it worked fine and it was updating and I guess after updating it didn't work. So what should I do?  I already tried to restart it but it didn't help. 

Read other answers
RELEVANCY SCORE 57.6

After last BIOS update I can't turn on my keyboard backlit. There's no such option in Lenovo Vantage, pressing Fn+Spacebar not working anymore.

Read other answers
RELEVANCY SCORE 57.6

Hi  I have recently purchased Ideapad 320s 14lkb 80x4 which has a support of Intel Optane 16GB - as per product manual and product feature page. I also purchased Intel Optane 16GB separately as the option for Optane pre-installed wasn't available from the seller. After installing the hardware in M.2 slot it is visible in the BIOS and in the disk management of Windows 10. I have also updated the BIOS version to the latest version 1.06. I have also installed the latest driver from the Intel Website. However when I run the intel optane software for acceleration, it says that the BIOS is not supported (refer attached screen shot) I relate this to some BIOS settings. Please help solve this issue.  I have also raised this with Intel and they are less likely to provide a solution as they haven't listed 320s motherboard as a officially supported one. However on the product page of Lenovo 320s 14lkb 80x4 - support for intel optane is one of the Key Unique Selling Propositions. The error I am facing is attached in the screen shot.


























Capture 1.PNG ?28 KB

Read other answers
RELEVANCY SCORE 56.8

When I hit the power button, the keyboard lights up, the power LED turns on, and I can hear the fan moving. The screen stays black when not plugged in, and very faintly flashes yellow when plugged in. It works fine when connected to an external moniter.

Read other answers
RELEVANCY SCORE 55.6

Hello, I was working on my laptop when it froze. So i turned it off and hit the power button to turn it back on however nothing appered on the screen. The power light button is on however nothing on the screen. I was wondering why this happened and what i can do to fix it.

A:Screen wont turn on

Hi -

A few things to try -
1. Boot into SAFEMODE
2. " " and choose "Last known good configuration"
3. " " VGA option
4. Boot using Windows DVD and select "Windows System Restore"

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 55.6

Hello My refubished computer had the same issue about a month ago where you hear the power button but the screen doesnt turn on. i dont want to pay 100 to get the motherboard wiped again. can you please help?

A:My screen wont turn on

the model name is 15-f272wm

Read other 1 answers
RELEVANCY SCORE 55.6

Yes my jumpers are correctly set.
Yes my video card is PCI and was tested on another computer.
Yes the screen was also tested with other systems and the cable, and they both work.
It is a P2B Asus Motherboard running on a 350mhz Pentium II 100mhz, 3 sticks of 128mb sdram pc-100. 250w working powersupply.

Screen just doesnt want to turn on with the system.
 

A:Screen wont turn on.

When the screen remains blank either something is loose or needs to be replaced. Any history or did this just happen one day when you turned the system on? Since you have 3 sticks of RAM have you tried one at a time.
 

Read other 3 answers
RELEVANCY SCORE 55.6

Hi. 
I have Dell e7450.
Sometimes when I turn on or reboot my laptop, his screen wont turn on. 
Just totally black.
If I connect external monitor, I can see that system is works fine, its loading into OS.
If I trying to press D+Power, I can see laptop displays turning on and goes fine through display check, but then its turning off and become black again.
 I spend some time turning on and turning off the laptop, and after some trys (5-20 times) it is starting work fine. 
Help me, please.
As I can see it is some software problem, but I cant understand what to do. 

A:Screen wont turn on

Hi Angrynaz
Thanks for writing to us.
Was there any hardware or software changes done recently?
If the system is working fine now then please update the BIOS and video drivers from from support.euro.dell.com--enter the tag#--submit--drivers and downloads--choose operating system and install the same.
Does it make any different if you swivel the screen back and forth?
Do provide us the system tag# and also confirm the name the system is registered under. Let us
know the contact number and email address.
Regards

Read other 1 answers