Over 1 million tech questions and answers.

BSOD 0x1000009F everytime PC enters sleep Mode

Q: BSOD 0x1000009F everytime PC enters sleep Mode

Hi there
My PC has been driving me crazy. I was having trouble with one of my HDs, so i removed it from the system and made a fresh install of Windows 7 Home Premium X64. Now it is even worst, before i had the same errors on the old system but at least it would enter sleep state correctly most of the times. Now i have again this "Custom Error" ntoskrnl.exe (nt+0x824DA)
Bugcheck code: 0x1000009F (0x4, 0x258, 0xFFFFFA8009B6AB60, 0xFFFFF80000BA2740)
But the PC will stay on and i have to shut it down on the Power button every Morning.
I checked the Crashdumps but cannot find the cause, maybe some of you will help me out.
Thank you

Preferred Solution: BSOD 0x1000009F everytime PC enters sleep Mode

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD 0x1000009F everytime PC enters sleep Mode

Hello Picas and welcome to SF

Please have a look at Stop error when you put a computer that is running Windows 7 or Windows Server 2008 R2 to sleep or into hibernation, or when you restart the computer: "0x9F"
If you need any help on that, post back.

Read other 3 answers

About every 3rd or 4th time I put my computer in sleep mode I am getting the BSOD. This is a brand new computer I put together myself one piece at a time. All the parts were bought brand new. I have followed the guidelines laid out in the BSOD posting instructions thread and have attached the requested files. Any help with this would be much appreciated! Thanks!

System Specs:
Windows 7
Home Premium
x64 bit
The entire system is a little under a month old

A:BSOD When Computer Enters Sleep Mode

Related to SCMNdisP.sys NDIS User mode I/O Driver from Windows (R) Codename Longhorn DDK provider. Yours is from 2007 and this driver is only used in Longhorn (beta).

I would remove it.

Read other 6 answers

Hey everyone,

I've had this Dell Studio 17 laptop for a few years now, and have ran into a few problems in the past. However, in the past few weeks, the computer seems to blue screen almost every time I close the lid and it enters sleep mode. This has not happened at all while the computer itself has been running.

Here is the minidump file from this morning. All of the 8-10 minidumps since 12/11 seem to point to "ntkrnlmp.exe", if I'm reading that correctly. What do you guys think is the problem?


A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
Arg2: 0000000000000258, Timeout in seconds.
Arg3: fffffa8003d57b50, The thread currently holding on to the Pnp lock.
Arg4: fffff80000b9c510, nt!TRIAGE_9F_PNP on Win7

Debugging Details:

Implicit thread is now fffffa80`03d57b50


FAULTING_THREAD: fffffa8003d57b50






LAST_CONTROL_TRANSFER: from fffff80003289a32 to fffff80003296e7a

fffff880`0335b740 fffff800`03289a32 : fffffa80`03d57b50 fffffa80`03d57b50 00000000`00000000 00000000`0000000d : nt!KiSwapContext+0x7a
fffff880`0335b880 fffff800`032964da : ff... Read more

A:BSOD 0x9f when computer enters sleep mode

I may have found a solution. It may have to do with the fact that my computer is hosting a bluetooth network, and my iPhone may be trying to connect while the laptop is in sleep mode. I'm not sure if this is the case, but I will post if I've found any results.

Read other 2 answers

Hi All,  I bought my 11e 3rd Gen just today. I really like it so far, except, I don't seem to be able to utilize the tablet mode. Every time I fold the screen back, it will enter tablet mode as per usual, but then once the screen actually touches the bottom of the laptop, completely folded back, it turns off and enters tablet mode. It's almost as if the sensor thinks the screen is folded shut completely and the laptop enters sleep mode.  Any ideas on what may ber happeneing? Thanks in advance. 

Read other answers

Hello all, could someone have a look at my dmp files. Although windbg points in the direction of PCI.SYS causing the stop errors, my knowlegde is far from sufficient to take the next step. When the laptop goes into sleep or hibernation mode, it crashes. Pretty consistent. Problem was introduced after an huge automatic update but this is something I realesed myself later. Thank you!

A:BSOD pci.sys error everytime after sleep mode Lenovo T420


The BSoD seems to be caused by the older drivers of your Intel(R) Wireless WiFi Link Adapter driver

0: kd> !irp fffffa800bc8b630
Irp is active with 4 stacks 2 is current (= 0xfffffa800bc8b748)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa800a2ce050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\NETwNs64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
Args: 00015500 00000000 00000005 00000003
[ 16, 2] 0 e1 fffffa800a027c70 00000000 fffff800038c8200-fffffa800b348ab0 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00015500 00000000 00000005 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800b348ab0

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm NETwNs64
start end module name
fffff880`05cdc000 fffff880`0655e000 NETwNs64 T (no symbols)
Loaded symbol image file: NETwNs64.sys
Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
Image name: NETwNs64.sys
Timestamp: Mon May 02 03:33:01 2011 (4DBDD18D)
CheckSum: 0083E... Read more

Read other 9 answers

Thought i had virus(computer kept shutting down to enter sleep mode) I have since reset to original factory settings but it still wants to enter sleep mode. can any one offer assistance?.

A:Computter Enters Sleep Mode

Standby is a state in which your monitor and hard disks turn off, so that your computer uses less power. When you want to use the computer again, it comes out of standby quickly, and your desktop is restored exactly as you left it. Use standby to save power when you will be away from the computer for a short time while working. Because Standby does not save your desktop state to disk, a power failure while on Standby can cause you to lose unsaved information.

To automatically put your computer on standby
Open Power Options in Control Panel.
In Power Schemes, click the down arrow, and then select a power scheme. The time settings for the power scheme are displayed in System standby, Turn off monitor, and Turn off hard disks.
To turn off your monitor before your computer goes on standby, select a time in Turn off monitor.
To turn off your hard disk before your computer goes on standby, select a time in Turn off hard disks.

To open Power Options, click Start, point to Settings, click Control Panel, and then double-click Power Options.
You might want to save your work before putting your computer on standby. While the computer is on standby, information in computer memory is not saved to your hard disk. If there is an interruption in power, information in memory is lost.

To create a new power scheme, specify the time settings you want, and then click Save As.

If you're using a portable computer, you can specify one setting for battery power and a differen... Read more

Read other 1 answers

Have an HP Envy dv7 running Windows 8 64 bit.  Have only had the laptop a month and was fine to start but now the computer quickly enters sleep mode in as little as 2 minutes from walking away from it.  Am using the high performance power settings and have ensured that the dimming/turning screen off/put computer to sleep are set at 10/20/120min respectively.  The laptop wakes as soon as I swipe my finger on the reader but is annoying to constantly find it alseep in as little time it takes to go to the kitchen to get a drink. Also had it go to sleep on me while in the midst of reading a web page.  Have only added MS Office and Mozilla Firefox/Thunderbird for additional programs since I purchased it. Any help would be appreciated. Thanks.

A:Envy dv7 enters sleep mode unexpectedly.

Hi,this is common and reported by many windows 8 users. how your PC will go into sleep again depends on how you wake it up.can you try wakeup your PC using power button and leave it for sometime - check if it still enters Sleep mode in the same time or this time as per your power Plan? you may need to create new power plans to get rid of this issue. because several updates from Microsoft/HP power assistant change the power settings of PC. which possibly causes the issue.what i can suggest is, create a new power plan and make sure hybrid sleep is disabled aswell. Hope it helps. Good Luck !!!!

Read other 9 answers

I have a new yoga 710 and a week ago (i think maybe it was after a windows update) it started getting into sleep mode every 2 minutes (screen goes black, i have to press a button and enter password). sleep mode is set to 10 minutes on battery and hibernate mode is set to 180 minutes so i dont know what is the problem. help will be appriciated since i cant work on the computer without touching the mouse every 2 minutes.

Read other answers

I have a a Portege R930. I am running a program that take 25-30% of the CPU for many hours. If I put the laptop into sleep mode, does the computation get suspended? If not, and it is still running, how does the CPU get cooled when the fan is turned off in sleep mode? Can the CPU overheat?

I *don't* want my many-hour program run to be interrupted by an overheating sensor. If I know that the program is suspended in sleep mode, I won't fear entering sleep mode. If not, then I will keep the laptop awake, and if I need to transport the laptop, I'll put it into hibernation.

Read other answers

Hi guys, i've had an issue since yesterday. My missus has downgraded me from the 46"

So i went out and purchased a second hand 15.5" lg monitor and a new vga cable, as before i was running via hdmi lead.. So everything was going fine untill i tried to play bf3, when i click on the bf3.exe my monitor enters sleep mode??

The game music can still be herd, and the pc seems responsive as my keyboard is still lit up and cap locks, numlock still responsive. Only way out is to hard reset.

I've gone inside the pc and removed the little dust that was there
Ive made sure pc is set in high performance mode
Made sure hibernation and sleep is off
Made sure vga cable is fixed
Checked driver for updates
Ran cc cleaner to insure no unwanted registary causing issues
Ran gpuZ to check temps (idle 32, gaming 57)
Tried unclocking my card
Tried raising fan speed manual to 100%

Yet it still happens, i've never had this issue before i got the monitor yesterday, and i know the gpu is not overheating, so do you think the monitor itself is the issue?

Tested games:
Working on highest settings:
-Black ops2
-Transformers foc
-DayZ (high not ultra)
-The warZ
-Portal 2

Games that shut down monitor:
-Crysis 2
-Resident evil: operation racoon city

The games that fail put the monitor into sleep mode as soon as the .exe is clicked.

Below is system
Win7 home 64bit
Amd black edition quadcore 4.22ghz
Amd 1gb HD 6570 gpu
450w psu
Gigabyte ga-78lmt-us... Read more

A:monitor enters sleep mode whilst gaming


Definitely sounds monitor related. What happens if you run BF3 at the same native resolution as the monitor?


Read other 4 answers

Got a weird one here that I can't solve but have an idea what it might be.

I'm running a Nvidia 8500GT video card and it has 2 video outputs, one VGA, one DVI. I wanted to run 2 monitors and connected a second one and set it up in the control panel to run dual view. It worked great in the beginning, but then started having some weird problems.

The first thing that happened is that the video card resolution settings would change sometimes on startup. Then it started thinking by Sammy 22" was a Generic CRT.

Then what I started noticing was that sometimes the monitors went into sleep mode (the monitors, not the PC), it wouldn't wake up when I moved the mouse or hit a key. When I tried rebooting it the monitors still wouldn't wake up but I could hear the PC booting up to the logon screen and making the logon sound.

Then I tried just going back to one monitor and the problem is persisting. If I leave the PC off for a few hours it will sometimes recognize the monitor on startup, but then after a while it will go into sleep mode and won't wake up.

Is it the video card? The drivers are all up to date. I've read the running dual view can be hard on the card? Do I need more power to run dual view? I'm not running it anymore.

I'm tempted to just try and run another card but if I can avoid dropping $100 for nothing...


A:Monitor enters sleep mode, won't come out, isn't recognized on reboot

Hmm, just tried rebooting PC and now it's not even rebooting, tried a couple times.

Forgot to mention that the power supply blew up about 4 months ago. Everything seemed fine after I replaced it though. Could it have shortened the life of the motherboard?

Read other 1 answers

I have WinXP and my computer restarts or enters sleep mode (if sleep mode: computer can not be 'woken' from sleep) with out warning every 15 mins.

Also when it restarts it comes up with 'Windows Has Recovered from a serious error' with some files that are effected...

I have been told it could be the RAM...

Any Help?

A:XP - Windows restarts or enters sleep mode without warning

Hello Adam. It appears to be a Power Management issue in Windows XP. In that case, you might find the following article useful.

Configure Windows XP power management

Hope that helps.

-- Goku

Read other 2 answers

I have a a Portege R930. I am running a program that take 25-30% of the CPU for many hours. If I put the laptop into sleep mode, does the computation get suspended? If not, and it is still running, how does the CPU get cooled when the fan is turned off in sleep mode? Can the CPU overheat?

I *don't* want my many-hour program run to be interrupted by an overheating sensor. If I know that the program is suspended in sleep mode, I won't fear entering sleep mode. If not, then I will keep the laptop awake, and if I need to transport the laptop, I'll put it into hibernation.

A:Can CPU overheat if Portege R930 enters sleep mode?

The answer seems to be that the CPU can't over heat because programs are suspended: http://forums.toshiba.com/t5/Port%C3...p/689961#M4014

Read other 1 answers

After upgrading to Windows 10, my eMachines model EL1360G enters sleep mode of it's own accord, 10 minutes or so, then will not come out with mouse movement. Have to reboot each time. No problem before upgrade. Can anyone help, please? I've tried the obvious with Power Settings, etc. 

Read other answers

Hello, i have a Satellite P50-A PSPMHU, and i install windows 10 64bits. Once installed, my laptop enter in sleep mode every time, must be every 5 minute, or 10 minute, it is not constant, i dont know what happened. If i install windows 7 64 bit, work good, but to install windows 10 64 bit, the failure occurs. Please help me. Only occur with windows 10 (32 o 64 bit). Thank for you can do for me.

Read other answers

I was working in Lightroom when my pc went into sleep mode.  Never happened before. I attempted to activate by pushing the power button.  Then I powered off and on. The Lenovo logo displayed on my monitor with the circular progress dial underneath, then the monitor displayed a "No signal, Entering the power saving mode shortly" message, then went black. I saw one thread suggesting removing the CMOS battery from the motherboard and holding the power button for 20 seconds to discharge power and reset the unit.  I have tried this and am still having the same issue.  Any suggestions?I am running windows 10, and note a major update applied last week, but I have been using the PC since then w/o issue until this problem occured this morning.Any help will be appreciated.Thanks

Read other answers

While playing games... my pc will always enter sleep mode after about 10 min. of play time. Once in sleep mode, it will not wake up.. so I have to turn off the computer by the button. This is really frustrating. I tried the live chat with microsoft and the tech found corrupted files?! But they wanted to charge me 69.99 to resolve the issue. Help?

A:Computer Enters Sleep Mode While Gaming and Wont Wake Up

guessing 7 or vista


and start type cmd right click it run as admin in the box enter sfc/ scannow enter run it twice

70 to fix it? really???


use above to keep eye on your temperatures , i cleaned out a computer yesterday and the fluff was enough to make a jumper

Read other 1 answers


I'm new here and I hope I can explain my problem so you can understand. Sometimes I'm not the greatest at explaining things. :-/

I have a Gateway GT5662, with 32-bit Windows Vista Home Premium pre-installed, and lately I've been having problems when it goes into sleep mode or I shut it down. I usually just leave the computer on and it'll go into sleep mode on it's own after awhile. Well, when I come back to it after a few hours, it won't wake up. It'll just be a black screen, won't respond to any keys or mouse clicks(yes, the monitor is on). So, I end up having to shut it down and start it back up manually(with the power button). When it starts back up, the Gateway logo comes on, but then it goes to a black screen and says something about an API or ATI error and then says press any key to boot from CD. When I ignore that, it tells me to restart by hitting ctrl-alt-delete. Well, when I do that, the whole process starts all over. The first time it happened to me was a little over a week ago. I kept hitting ctrl-alt-delete and eventually this Windows Vista Start-up Repair came on and I ran it. Computer booted up fine. Next time it happened, the System Repair didn't come on, but I put the Recovery Disk in and ran it from there. Well, tonight when it happened, we put the Recovery Disk in and the CD-Rom started loading it(with the white bar on the bottom) and then another bar came up with Microsoft Corporation underneath it, which I believe happens everytime... Read more

Read other answers

Hello all,

I've tried to troubleshoot this issue in which my laptop will enter sleep mode at random times. Strangely, it only happens when my computer is plugged in to the adapter. Looking in the Windows event logs showed that entering sleep mode was either caused by Event 37 (system is limited by firmware) or Event 42 (entering sleep because of the sleep button or lid). I have since installed every software update provided by Dell's website for my laptop model (Inspiron 7720), including the latest BIOS update, but the issue persists. After receiving the Event 42 warning in the log, I deactivated the power button in the power options for the current power plan, which only caused the system to freeze up entirely when it entered sleep mode again. The power light was still on, but the screen turned off and neither the touchpad nor the mouse nor the keyboard would wake the computer up. I've also tried using a different adapter with this laptop - a 90W adapter instead of the 130W one that came with the laptop - but this only prolonged the time it took for the computer to enter sleep mode again. I even deactivated sleep mode in the power options to ensure that this wasn't the cause. It will enter sleep mode regardless of whatever I'm doing, too - even while I was typing this post, the screen turned black and the power button began pulsing. The only way I can turn the laptop back on again is by closing the lid and opening it again, since for some reason pressing the power button wo... Read more

A:PC Randomly Enters Sleep Mode (Kernel Power Event 42)

Hi Fiero, Welcome to Forums.

Reason for the issue can be anything. Like a software which came pre installed on your laptop. Dell and other brands install their own power management tools.

You can goto advanced power management settings, look indeed for hibernate or sleep, change the 180 minutes into 0 for meaning NEVER.

If you find some software in your Control panel (add/remove programs) by Dell for power management. Try to uninstall it (Don't worry you can get it back from Dell site) and check.

Check for Keyboard/touchpad/mouse/DVD RW for "Allow this device to wake up the computer" at the "Power management" tab of respective hardware.

Keep us posted.

Read other 7 answers

I am having sporadic blue screens when I close the lid of my laptop to put it to sleep. It is a HP DV6-6000 running windows 7 home x64. I attached the requested diagnostics. Thanks in advance for any help.

A:BSOD when computer enters sleep

Related to AthDfu.sys BulkUsb Drive from Windows (R) Win 7 DDK provider. I would re-install the newest available.

Read other 1 answers

My computer used to sleep fine. I use it a lot manually. I believe a driver update caused the problem, but I do not know which one. It happens every time it goes to sleep mode for any reason.

Perhaps related is the following below:

I recently changed my c:\Users folder to F:\Users. I used robocopy (not mirror image though as I already had some things in those folders), then mklink /j to make a junction. I had many problems until I changed the ownership of my folder. Before that I could not open firefox or thunderbird except as an Administrator (another account, not administrator, was able to use them fine). I still cannot load internet explorer, which is needed to purchase on ebay (firefox will not link to paypal).

Thank you in advance for your help.

Read other answers

My PC has been acting VERY weird lately. BSOD left and right, being slow, etc.
Just about every time I go into sleep mode I get the BSOD. Here are a few dump files form the last time and past times.

Attachment 126021

Attachment 126022

A:Crash everytime I go in Sleep mode

STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION Usual causes: System service, Device driver, graphics driver, ?memory

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64


Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp1_Yet%20Another%20BSOD[1].zip\Windows_NT6_BSOD_jcgriff2\122310-38875-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03401000 PsLoadedModuleList = 0xfffff800`0363ee50
Debug session time: Thu Dec 23 10:24:44.689 2010 (GMT-5)
System Uptime: 0 days 0:40:03.733
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* *
* Bugcheck Analysis *
* *
************... Read more

Read other 9 answers

Hello TechGuy forums!

Recently my custom build has started randomly going into some kind of sleep mode, probably caused by lack of video signal. The monitors report that they are entering power save mode and there's a loud crack from the speakers.

However, no input will ever wake it back up. TeamViewer reports the computer as online for a minute or so (but fails to connect) and then it switches to offline.

The problem seems to occur at completely random times. It has happened after half an hour of browsing the internet or two hours of gaming.

All the temperatures are OK (except for an "AUX" sensor that has been reporting insane temperatures since the first day) and I have made no hardware or software changes other than reseating my video card a couple of weeks ago.

So far I have ran FurMark, which got my GPU temperature up to 75 C with the case open and it all seemed stable and the Windows-based memtest, during which the PC crashed again while I was away.

The next thing I would do is try using the PC with one stick of RAM at a time and see if that solves anything, but I thought I'd post here first to see if anyone has had a similar experience or has any advice.

Specs (short version)

2 x 4 GB Corsair
Sirtec 500W
ASRock 970DE3/U3S3
Dual monitors (DVI/VGA and HDMI)
Windows 7 x64

Thanks for reading!

Read other answers

hi, since a few days ago i have this weird problem, my latpop Y50-70 restarts everytime it enters sleep mode and I want to wake it up.I have windows 10 installed and I've uptated all the drivers.any solutions?

Read other answers

As above - I just recently did a FRESH installation on a new SSD (crucial M4) of windows 7 x64. previously i have never had this issue before, but currently, whenever I set it to sleep and resume later (doesn't matter how long it has been in sleep mode), it shows the desktop for 3 seconds before it BSOD.

all windows updates and drivers have been installed.

I have attached the relevant minidump files for everyone's analysis here.

hope i could find some help here. thanks!

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF8000287F0C5
BCP3: FFFFF88003892120
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:

Read our privacy statement online:

If the online privacy statement is not available, please read our privacy statement offline:

A:BSOD everytime after resuming from SLEEP. [win 7 x64]

Considering what you've posted, let's get some more information about your errors.Please follow this procedure: Jcgriff2's BSOD Posting Instructions

Important! Running BSOD_Windows7_Vista_v2.64_jcgriff2_.exe will automatically run autoruns.exe. Make sure they both are in the same location.Do not attach the .zip file to your next post as directed in Step 4. It will be too large and will fail. Upload the file to Mediafire (or another file-sharing site) and copy/paste the weblink in your next post.Use Speccy to provide details of your computer's configuration.

Download, install, and run.After Speccy has finished gathering information, click File > Publish Snapshot.Click Yes. A web address will be displayed. Click Copy to Clipboard and paste it in your next post. Include your computer's manufacturer and model number, if you haven't already.Please download MiniToolBox and run it.
Checkmark following boxes:
List Installed ProgramsClick Go.
When the scan is finished, a text file will open in a Notepad window.Copy the entire contents of the Notepad window, and paste in your reply.
Result.txt will be saved in the same directory the tool is run.

Read other 1 answers


I've a clevo m570MU laptop and I've intalled windows 8 x64, dual booting (with windows 7 x64 on the other internal disk partition).

Everything is fine with windows 8 but I cannot get it to hibernate. I've read that it could be the "ENE SD card drivers" and so I uninstalled it. Also, that it could be the drivers of the motherboard and I updated them.

I had no luck with these. I've also read that some Dell laptops are getting bios updates to solve same type of issues, but my laptop is old and so I don't believe it will happen. I've attached the info of my laptop.
Does anyone have an idea how to solve the issue? I've attached the minidumps!
Thanks in advance

A:BSOD everytime I hibernate and sometimes on sleep

Your reports seem to be consistent. The problem is a driver. Go to the appropriate website and update driver

Esd7sk.sys file description
ENE PCI Secure Digital / MMC Card Reader Driver
ENE PCI Secure Digital / MMC Card Reader Driver
ENE Technology Inc.

Read other 2 answers

Does anyone know what the deal is? I found this in Event Viewer, and have seen it a couple times.  The funny thing is, this will happen if the system returns from sleep, like everything is normal, or it'll happen when I put my P51 to sleep and then it goes into some weird mode where I have to power the entire thing down.  See attached files or the links  

A:System enters sleep then returns from sleep one second later

Sounds like you have something running that is refusing to go into a sleep state.     Try disabling all startup items, screensavers and unplugging anything connected via USB, so your system is booting up as clean as possible, and then try entering the sleep state again. If you can remember when this first started, examine installed programs via the Programs and Features control panel applet, to see if any new software was installed about that time.    You should also run a full scan using good virus scanner such as Malwarebytes free scanner (even if you already have one installed).  Update your system' device drivers to the latest from Lenovo is also a good idea, as is looking in Device Manager for any devices showing an error condition.Also use start button to enter sleep (right-click Start >> Shutdown or Restart >> Sleep) rather than closing the lid to rule out the lid switch.You can also try resetting your laptop's power scheme to the defaults by opening an Command Prompt Admin, and typing: powercfg ?restoredefaultschemes and pressing EnterPowercfg can also perform a sleep study that may identify a problem, by once again opening a command prompt and typing or pasting in the following command:   powercfg /SleepStudy /output %USERPROFILE%\Desktop\sleepstudy-report.html   The command will place the sleepstudy-report.html on your desktop Another sometimes... Read more

Read other 1 answers

Hey guys this has finally gotten to the point of annoyance. I Like to put my Laptop to sleep when I leave the office and wake it up when I get home. It BSOD every time. Your help is greatly appreciated. I have rebuilt the machine thinking that would resolve the issue. I still need to install AV but have left it off until I can fix the issue.

Please let me know what other files I may need.

This is a Lenovo W530 running Windows 7 Ultimate 64-bit with 32GB of RAM

A:BSOD on Lenovo W530 everytime it wakes up from Sleep

Welcome to the forum.

mcdbus.sys Tue Feb 24 16:34:07 2009 (49A3CD1F)
MagicISO SCSI Host Controller driver
Driver Reference Table - mcdbus.sys

and install Revo Uninstaller.Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sun Oct 6 05:48:35.570 2013 (UTC + 6:00)
System Uptime: 0 days 21:52:09.694
BugCheck 50, {fffff87ff9644c68, 0, fffff88001725f70, 5}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Tue Sep 24 03:53:38.996 2013 (UTC + 6:00)
System Uptime: 0 days 8:18:37.350
BugCheck 4A, {7769164a, 2, 0, fffff880208e6b60}
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )
PROCESS_NAME: svchost.exe
Based on the bugchecks, I would recommend you follow and complete the steps given below:1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to... Read more

Read other 1 answers

Hello everyone!

I cant seem to troubleshoot this anymore because I only use Bluescreenview and Whocrashed i really dont know how to open the dump files so i can analyze and try to get the culprit. This has been going for months now I have already changed my anti virus and adjust most settings related to this issue. I hope someone helps me with this, its getting out of hand already.

Thank you so much!!!

A:BSOD error everytime I sleep or Hibernate the laptop

Hi computerpod123,

Welcome to the 7forums.

Please re-run the tool and upload the zip file, there are many files missing.

Read other 6 answers

Every time I turn the computer from sleep i get the blue screen, and it reboots. But if I shutdown works fine. I have tried cleaning my registry, updating windows, and have norton but im sure its not the drivers because the computer was bought in 2012. I hope I attached the right files containing my drivers, computer specs, and bsod errors.
Thank you

A:BSOD everytime computer wakes from sleep, error 0x0000007a

Error F4 and 7A are both storage related. How old is your hard drive?

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa8005569b30, fffffa8005569e10, fffff80002fc5350}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {20, ffffffffc000009d, fffffa80074427c8, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+50080 )

Followup: MachineOwner
System Optimisers

Please remove the following software:

Start Menu\Programs\TuneUp Utilities 2012 Public:Start Menu\Programs\TuneUp Utilit... Read more

Read other 3 answers

I downloaded and ran a program the other day that I believe had a virus. Actually I know it had a virus because people that commented about the download even said it has a virus and I just didn't read that before the download. Now when I am in Normal Mode the computer gets the BSOD before I can even do anything (usually about under 30 seconds). I have been doing research and someone posted a topic about a virus called Rustock. That virus describes everything that is happening to my computer. Also the Virus Heat looks like it could be too. I have Vista as the OS. I have another computer that is fine with XP that I have been reading online and downloading a couple of programs to run to try and clear it. Can anyone please help to what I should do with this? I read something that the Rustock would have a file in the registry name PE386. I went into the right subfolders and cannot find anything of the similiar.

Read other answers

Hi I could do with a little help as I am out of my depth, I am experiencing random BSOD's with 64 bit windows 7 on a refurbished desktop I bought. I have been having these BSOD's for months, at first suspecting my graphics card, I swapped out the graphics card with one I knew was working but to no avail, I have run various stress tests and cannot force a crash.

I have looked around the internet and see that the motherboard on my Desktop looks a bit iffy but am unsure if it is ultimately the problem and would appreciate any help or constructive comments.

I have tried to follow the procedure for reporting a BSOD, please advise if I have missed something crucial

My PC is an HP Pavilion m9765uk

Windows 7 Home Premium
- x64 ?
-originally it had vista and an OEM version of windows 7 put onto it when I purchased it

- What is the age of system (hardware)? 2 years
- What is the age of OS installation (have you re-installed the OS?) 18 months no reinstall

i7 920 at 2.67 Ghz not overclocked
Nvidia 9600GT graphics again not overclocked
6Gb Ram
integrated sound

I have a TV Card which I have disabled to try and rule it out

I would appreciate any help anyone can provide as its driving me nuts


A:Random BSOD error 0x1000009f

The causes are pretty much scattered all over the place. A good bit are 0x101 bugchecks which can't be debugged without at least access to a kernel dump (minidumps too small). WHEA errors too which consistently tell that there was an internal timer failure in the CPU.

There may be a possibility this is software, despite the symptoms appearing hardware-based in nature. There's some drivers I saw that are rather odd or just plain old. Your RAID controller drivers look pretty stale (Nov 24, 2010) so any updates at all would be good. You will want to go to the HP website and download pretty much any driver updates related to your hardware, as they all look a couple years old. Even if the updates still appear old, you will want to try them as any update at all is better than none.

As for the odd driver, it's called bridge.sys located in \Windows\system32\DRIVERS\ directory. It's quite old (2009) and from googling it and looking at the driver databases the only basic information I can come up with it is it's some MAC Bridge driver. I'm not sure why you would need any bridge connection of any kind for your system. Try renaming it to bridge.BAK and restart the computer and see what happens (like if your PC starts running ok again). I'm worried that this thing may be the product of a viral infection however, so be warned that may be the case. If you personally suspect infection, there's a security forum here at SF with people that will assist you there in detection and removal.

Asi... Read more

Read other 1 answers


I'm getting a BSOD when trying to boot everytime. I tried doing all of the advanced options (system restore, refresh, etc) but still getting the issue. I can only log in with safe mode.

The Critical event in my event log says:
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

Source: Kernel Power
Event ID: 41 (x3b)

Below is my attachment as requested in the instructions for the forum. Any help would be greatly appreciated! Thanks!


A:BSOD on boot everytime. Can only log in with safe mode

It's working now for me after I disabled and enabled a bunch of devices (sound, video card, wifi, etc)

Read other 1 answers


I had a lot of blue screens occurring in June-July, but that was fixed from removing my antivirus and replacing it with microsoft security essentials. Since 7/22 I've been getting blue screens randomly--sometimes when I turn the computer on from hibernation it will crash, or the wireless drivers will "disappear" and reappear after the computer crashes and restarts. They all seem to be caused by ntoskrnl.exe and are driver power state failures. Any help in fixing the problem would be appreciated!

A:BSOD happens through random events - error 0x1000009f

Can anyone help? I'm getting more frequent BSODs now. :\

Read other 9 answers

Hi all

My PC a Envy 14 2010 make has got a BSOD 2 months ago. Every time I turned on wifi or put in a LAN cable when it shuts down it gives me a BSOD caused by driver state failure. It is OEM and was pre-installed 2 years ago with the laptop.

A:BSOD error 0x1000009f caused by ntoskrnl.exe

Welcome to SevenForums.

Your BSODs were caused by the HP Disk Filter (hpdskflt.sys). You should update/remove it.
HP Support & Drivers | United States

BugCheck 1000009F, {4, 258, fffffa8005509b60, fffff80004f86510}

Unable to load image \SystemRoot\system32\DRIVERS\hpdskflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for hpdskflt.sys
*** ERROR: Module load completed but symbols could not be loaded for hpdskflt.sys
Probably caused by : hpdskflt.sys ( hpdskflt+2a9b )

Read other 5 answers

Hello, it started with random BSOD like once some week, last two week, but today i was on internet and crashed and now i can't boot in normal mode, sometime i have couple of minute before BSOD sometime it crashes at window startup. Did not changerd any hardware lately and the only 'new' software i added recently is google chrome. Safe mode is working. On some BSOD i got the nvstor.sys or classpnp.sys but other time just the STOP number.

Thank you in advance for the help.

p.s. sorry for typo english not my first language.

A:Random BSOD, but now everytime i boot in normal mode

Welcome to SevenForums,

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.
Click on User CP on the top right of this page
Click on Edit System Spec
Fill in your computer specsSystem Info - See Your System Specs


From the .dmp files I've found some drivers that need to be updated:

First delete remnants of its drivers/older drivers using Driver Fusion/Sweeper

3: kd> lmvm nvstor
start end module name
fffff880`011a7000 fffff880`011d2000 nvstor T (no symbols)
Loaded symbol image file: nvstor.sys
Image path: \SystemRoot\system32\drivers\nvstor.sys
Image name: nvstor.sys
Timestamp: Sat Mar 20 02:45:11 2010 (4BA3E257)
CheckSum: 000291A5
ImageSize: 0002B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source: Driver Reference Table

2: kd> lmvm rtl8187
start end module name
fffff880`05cdb000 fffff880`05d53000 rtl8187 T (no symbols)
Loaded symbol image file: rtl8187.sys
Image path: \System... Read more

Read other 9 answers

Hey Guys,

I keep getting random BSOD's. Would someone be so kind to check my dump file?

BCCode: 1e
BCP1: FFFFFFFF80000003
BCP2: FFFFF800030CDA38
BCP3: 0000000000000002
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

If additional information needed, I will try to provide it.

Many thanks to those who try helping me out

A:BSOD on startup. Everytime, works only in safe mode

This was an easy one. I do not care if you paid for it or its free, uninstall AVG, but make a system restore point first. For testing purposes download the free Microsoft Security essentials. MSE is made for windows, no one has ever had a BSOD due to MSE. Once you are satisfied that the BSODs have come to an end you can continue with MSE or use AVAST. both are free.

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Richard\AppData\Local\Temp\Temp1_GEC-PC-sri_14_01_2015__220012,68.zip\011415-17596-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`03006000 PsLoadedModuleList = 0xfffff800`03249890
Debug session time: Wed Jan 14 02:50:40.616 2015 (UTC - 5:00)
System Uptime: 0 days 0:01:17.990
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* ... Read more

Read other 1 answers

I am new to these forums. I'm unfamiliar with reading MiniDumps to diagnose this particular BSOD. Any help will be appreciated, thanks.
I have attached a minidump.
0x1000009f DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe windows 7 x64
Dump File         : 121013-8938-01.dmp
Crash Time        : 10-12-2013 23:50:39
Bug Check Code    : 0x1000009f
Parameter 1       : 00000000`00000004
Parameter 2       : 00000000`00000258
Parameter 3       : fffffa80`0cd29b50
Parameter 4       : fffff800`02480740
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+78a8a
File Description  : NT Kernel & System
Product Name      : Microsoft® Windows® Operating System
Company           : Microsoft Corporation
File Version      : 6.1.7601.18247 (win7sp1_gdr.130828-1532)
Processor         : x64
Crash Address     : ntoskrnl.exe+78a8a
Stack Address 1   :
Stack Address 2   :
Stack Address 3   :
Computer Name  ... Read more

A:BSOD 0x1000009f DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe windows 7 x64

This is likely due to out of date or conflicting drivers. Please run these for us.
Please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Please download MiniToolBox  , save it to your desktop and run it. Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size. Click Go and paste the content into your next post.

Read other 6 answers

Please help me with this BSOD thing. I can see that you're the best in this field.

I attached the said zip file.

A:BSOD everytime I start my netbook in normal mode(I can't open)

Hopefully, it will easy to stop your BSODs. Your reports were consistent and gave a driver as the cause. Please go to the company website and update this driver. Use the computer and then report back.

Athr.sys file descriptionProductname:Driver for Atheros CB42/CB43/MB42/MB43 Network Adapter Description:Atheros Extensible Wireless LAN device driver Company:Atheros Communications, Inc.

Read other 1 answers

Help would be much appreciated in figuring out how to deal with this BSOD. I'm a very loyal PC user, help me to keep hating on macs

A:BSOD for unknown reason, error 0x1000009f, diagnostics attached

You have given us only one dump report. It is almost impossible to diagnose based upon just one. Based upon this one it may be a driver a problem The only was to diagnose is a driver verifier test. We dont want to make that test until necessary. Go enjoy your computer any additional problems, post. The more reports the better. We will be here after a few more reports, which may not even happen.

Read other 4 answers


Hope this is the right section instead of performance management etc.

How can you stop/configure windows 7 (I'm using professional) so that if you are downloading files just by standard IE it doesn't go to sleep or into standby until all network activity has finished?

Yes, I could set it to high performance but that means the pc would stay on all night and I'd have to use either a schedule or 3rd party app to shutdown at a predetermined time.

What I'd really like to do is make sure windows 7 doesn't think it's idle UNTIL it finishes any network activity like completing a download.

I really like windows 7 but just need to iron out some niggles............

A:Windows 7 enters sleep/standby while dwnloading?

OK.. Here is some trick, try that it may work..

go to device manager, select your network adaptor, right click and go to properties. under power managment tab make sure "allow this device to wake the computer" is selected.. try that

Read other 2 answers

I've had this problem on and off for a while. It occurs mostly when I'm playing a game. My video card is an Nvidia Geforce 8600 GTS, and my motherboard is a Foxconn L S-36. I've noticed that the standby light on my motherboard stays orange even when powered up. My video driver is up to date, and the game that triggers it has requirements below my system specs.

Anyway, I was just wondering if anyone has any idea what the problem could be, and how I could fix it.

Trent Rudd

Read other answers

What could be causing the following situation- When restarting my computer (Windows 7 64bit) after the "starting windows" screen appears the screen will go dark and display "power saving mode". After about 60 seconds the computer will restart from the "starting windows" screen and complete the restart process. Once it completes everything the computer runs fine. Any help would be appreciated!

A:During restart computer enters power saving mode

Could be a boot sequence problem. Under the BIOS, make sure you're booting in the usual order (1. CD/DVD Drive, 2. Hard Drive, 3. USB, 4. Anything else). If that does not work, go into the BIOS and click the option to reset to defaults, save, and exit. If the previous methods still do not fix the issue, update your BIOS.

Read other 1 answers

I just bought a new Horizon 2 AIO computer from Best Buy. I plugged it in and turned the power on, the Lenovo loading screen came up, and then a "power saver mode" count-down appeared, counting down from 9, before the screen went black.  The power light is still on, but the computer appears to be asleep. I have tried this several times (after holding down the power button to turn it off) with the same result. Why won't my brand new computer start???  Please help, thank you!  

Go to Solution.

A:Horizon 2 immediately enters power saver mode

Welcome to the Lenovo Community !
Sorry to hear of the problem.  Unfortunately what you have described is not something a new system should do.  Since the system is brand new, I would suggest you just return it to Best Buy and do an exchange.

Read other 4 answers

Hello All,
I've just purchased a S2716DG, and when I power on the monitor it Immediately states 'entering power save mode'?
I plugged the cable (HDMI) into my laptop and it works straight away, so clearly the monitor works.
 Therefore I presume that there is an issue between the desktop and the monitor? I'm using a Optiplex 390 desktop - i3 CPU with a NVIDIA Quadro NVS 295 connected via a DisplayPort cable, I've also tried it without the card and get the same result.
Can anyone help clarify what is the issue and how I can resolve it please?

A:S2716DG - Immediately enters power save mode

Read through this.
The S2716DG HDMI is using 2560x1440 60Hz.
The S2716DG DP is using 2560x1440 60Hz/85Hz/100Hz/120Hz/144Hz.
It is possible that the S2716DG DP is set to a Hz that your video card does not support.
When connected via DP, does the Menu button bring anything up? If yes, go to Others.* Factory Reset- Reset all settings to the factory preset values* Go back and change Monitor Deep Sleep to Disable

Read other 1 answers

Over the last few months my Thinkpad S1 Yoga has developed a habit of randomly entering tablet mode when the lid is about 90-120 degrees open, as if the lid was swung past 180 degrees. Consequently the keyboard and trackpad are disabled when this happens. Closing the lid to force the computer to sleep and then opening the lid again removes the symptom. Moving the lid past 180 degrees sometimes makes the computer go into laptop mode again, or sometimes makes the display rotate 90 degrees while staying in tablet mode. I tried to remove the sensor in Device Manager and let plugnplay rediscover it but the problem remains. So I'm guessing this is a hardware problem? For now my workaround is to keep the sensor disabled (which means no tablet mode unless I Before I tear the computer apart and start replacing parts - it's out of warranty - any thoughts?Thanks.

Read other answers