Over 1 million tech questions and answers.

Sat S300 - How to get Supervisor Password Prompt to Enter Full BIOS Setup?

Q: Sat S300 - How to get Supervisor Password Prompt to Enter Full BIOS Setup?

Have a Satellite PRO S300 (PSSB0A-06500T) which is BSOD-ing with Stop 7B and I want to get into the full part of the BIOS so I can reset boot order to enable me to re-install Win XP.

Esc - F1 just gets me into the restricted part of Page 1 of the ACPI BIOS set-up. I know the Supervisor password! So how do I get to a password prompt that will allow me into both pages of the BIOS set-up.

I have tried F12 on boot to attempt to get into the boot options on the Toshiba splash screen, but that does not work.

RELEVANCY SCORE 200
Preferred Solution: Sat S300 - How to get Supervisor Password Prompt to Enter Full BIOS Setup?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Sat S300 - How to get Supervisor Password Prompt to Enter Full BIOS Setup?

I think you hold down a button during power on. Try holding the "INS" key to get the supervisor password prompt to appear.

Read other 2 answers
RELEVANCY SCORE 124.8

Hi,

I have a Toshiba Satellite Pro S300-11Y laptop and have a problem. A day, I decided that wanted to set a supervisor password for the bios of the laptop. Now, I remeber this password, but when I entry to the BIOS setup, I can't view any option for change o disable this password. I can't entry this password for set it me a supervisor, and also I can't modify some options as for exemple, the boot sequence.

How can I delete this password or how can I login as supervisor? I don't see any option for it, and I need to modify the boot sequence.


A lot of thanks.

A:Satellite Pro S300 - How to enter supervisor password?

Hello

About this I can only say check your user manual!!! ;)

There I have founded the following information:
+C:\Program Files\Toshiba\PassowrdUtility\TOSPU.exe+
+This utility lets you do the following:+
+Register, delete or change the supervisor password+
+Create or invalidate a supervisor password token+

Check this and then you should be able to delete the password if you know the current.

Greets

Read other 1 answers
RELEVANCY SCORE 100

Hi,

yesterday i set the bios/supervisor password.

When i now turn on the notebook, i can see the Toshiba - Leading innovations screen and then it goes dark and won't boot any further.

The harddisk / fan / graphics card etc is working - but i don't see anything nor do i get some kind of prompt or shell or whatsoever.

I tried all those "Press, ESC, Press F2, Press F1, Press INS" stuff, nothing worked out.
I removed the battery for several mins while pressing the power button, nothing.

Maybe somebody has some kind of clue whats wrong with this maschine....

A:Portege R830-1EE: Supervisor / Bios password - No Boot or login prompt

Hi

Did you use some high ASCII character like ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ? etc in your BIOS / Supervisor password?

In the past the usage of such characters prevented the notebook from booting up.
In such case you had to contact the service partner in order to solve this problem.

Read other 4 answers
RELEVANCY SCORE 86.8

HP 241 G1, F10 BIOS SETUP. ENTER ADMINSTRATION PASSWORD, SYSTEM DISABLED 98592431

A:HP BIOS SETUP ENTER ADMINSTRATION PASSWORD

Hi, Enter  27490417 Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 85.6

Hi, I have the problem to boot up my HP laptop when I enter my HP 15 laptop BIOS setup, it shows me to enter administrator password. So I entered three times the wrong password on it, it showed me system disable message and the code is 73203555. Can you tell me the administrator password? Thank you....!!!

A:Laptop enter administration password in BIOS setup

Hi, Enter  62161591 Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 85.2

Hey guys, I have a Lenovo ThinkPad 11e 20DA series laptop.  I know my supervisor password.  The issue is that I can't make any changes in my BIOS.  It ALLLL started when I updated my BIOS with the latest version.  I selected my laptop and model and version from the Lenovo website, selected windows 10 and BIOS, and downloaded the update utility.  It did its thing.  And now I cant make any changes in the BIOS. NOTHING!!  And my laptop doesn't prompt me for a supervisor password.  I know to press F1 when the logo comes on and that it'll take me to BIOS or that it's suppose to prompt me for the password, however, it just simply doesnt do it.  What do I do? I'm unable to make any changes in my BIOS!! Is there a way to flash the BIOS and revert back to an older version or something?  I used to be able to make changes in my BIOS.  What should/can I do?

A:Can't Enter Into Supervisor Mode of BIOS

You may need to contact Lenovo Support directly if it is not prompting for a password, and yet also not letting you into the BIOS as the result of one of their BIOS updates.   They may take care of it for you, but unfortunatelly just removing the CMOS battery will not help. From page 34 of the hardware maintenance manual linked below: Supervisor passwordA supervisor password protects the system information stored in the ThinkPad Setup. The user must enter the supervisor password in order to get access to the ThinkPad Setup and change the system configuration.  Attention: If the supervisor password has been forgotten and cannot be made available to the service technician, there is no service procedure to reset the password. The system board must be replaced for a scheduled fee. ThinkPad 11e 20DAhttps://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/tp_11e_yoga11e_hmm_en_sp40f29949_02.pdf Good Luck  

Read other 1 answers
RELEVANCY SCORE 85.2

Hi

It can look stupid but I'm trying to access to the BIOS menu on my TOSHIBA Satellite Pro S300-EZ1511 and i can't, i searched for that on the manual but i couldn't find anything.

I need to go there so i can change the SATA settings to IDE so i can install windows XP system after i formatted the Vista.

Thanks

A:How to enter BIOS settings on my Satellite Pro S300?

It should be in the Users Manual somewhere.

Turn on the laptop, and hold down the ESC key. Then press F1 when it prompts you.

Read other 2 answers
RELEVANCY SCORE 80.4

I can't seem to change any of my BIOS settings - even though at one point I had set a bootup password.If I press the Access IBM mode and F1 consecutively, I can enter the BIOS Setup. Yet it seems that I can't change anything - not even date or time. All menus say "If any items require changes, please consult your system Supervisor." on the right, but who would that be?In all (sub)menus, up/down buttons have no effect, all else beep, only Esc works. Just in long menus, such as Config/Power, do up/down have some effect: They scroll, but won't select anything. In the Restart menu, I can only confirm "Exit Discarding Changes" but choose none of the other options. What is wrong there? Could anyone please help me get into that mysterious Supervisor mode?Cheers!













Solved!

Go to Solution.

A:BIOS Setup in Supervisor Mode?

To unlock the BIOS, enter BIOS>Security>Password>Lock BIOS Settings>Disable and enter the Supervisor password.

Read other 9 answers
RELEVANCY SCORE 79.6

Hello, Problem 1:I've set the supervisor password some time ago on my T450s. I think I used the special character "!" which was accepted at that time, but I'm not sure anymore today. Now after severeal BIOS updates the "!" only leads to a beep of the system and I also tried all of my standard-passwords without "!" , but without success. Problem 2:Now I've tried to roll back to older BIOS versions to try if one of these accepts the "!". But every version I tried leads to a "secure flash authentication failed"-error after the reboot of the laptop to actually flash the BIOS. The following link says its the Rollback Prevention Enabled, but I checked in BIOS and it's clearly disabled.https://support.lenovo.com/sg/de/solutions/ht117858 Now I have no idea how to proceed. Has anyone seen that the BIOS has accepted special characters like "!"?Are there other T450s which are not able to rollback to older BIOS versions with the above mentioned error? Technical Infos:- Model: ThinkPad T450s 20BW-S03E00 (the one with Intel graphics only and a core i5-5200)- BIOS: 1.29(JBET65WW) Thanks in advance!  Best regards,Linus123

Read other answers
RELEVANCY SCORE 78

Hi, I didn't really find the answer I was looking for so here I go: I bought thinkpad yoga 460 that was previously in demopool(nbwn.de). After using it for 4 months I noticed that it has a BIOS supervisor password set and I couldn't get in BIOS. I sent it back, but none of the passwords they usually set worked nor did the one that was given by the previous customer. I definitely haven't set a password of my own, nor could anyone have done it while I have been in possesion of the laptop.  The interesting thing is that when trying to enter BIOS, it asks for fingerprint first which is mine interestingly, although I set one only in windows and after that it asks for the supervisor password. So is it possible that I have unknowingly set the password for BIOS through windows?

Read other answers
RELEVANCY SCORE 78

I just reinstalled XP into an ex lease Lenovo Thinkcentre M57 [6072 ] & trying to actvate Enhanced Security & need a password .Is there a defult p/word for a M57 ?
Ozi

A:Bios supervisor password

Ozi,

While I have not used that exact model, most BIOS passwords can be cleared by opening the case and removing the CMOS battery for a few seconds. It looks just like a big watch battery on the motherboard. Good luck!

-Kenny

Read other 3 answers
RELEVANCY SCORE 77.2

When I boot into bios via esc and F1, it wont let me go to any other pages, says the supervisor password is registered but doesn't prompt you to enter a supervisor password to make any changes. I have upgraded the bios version to 2.0 but that hasn't made any difference. I need to change the boot order but can't get into it to change it.

Does anyone have any ideas? How I can force it to ask me for the supervisor password? Or let me go onto the other pages?

Thanks

A:Supervisor password and BIOS settings

Which laptop model do you have?

Tell us the PSxxxx-xxxxxx number found on the Base Sticker.

Read other 10 answers
RELEVANCY SCORE 77.2

Hello there, I set my supervisor password long time ago, I still can use my laptop with hard drive password , but now I want to remove the hard drive password. I can not access BIOS to remove the hard drive password.So,Is there any solution? I still have time on my waranty.... Thanks 

A:I forget BIOS Supervisor Password

There is no solution to a lost supervisor password other than replacing the motherboard.  As far as the HDD password, it is encrypted in the BIOS but the encryption algorithm is the same on most models of a similar age.  (You don't say what model you have.)  If you have another machine or anything T400 or newer with an ultrabay, you can remove the password there

Read other 1 answers
RELEVANCY SCORE 77.2

Hello,I've recently bought a used Lenovo ThinkPad L440 and it has a supervisor password which prevents me to modify anything on the BIOS. Is there a legal and easy way to clear it since the former owner doesn't know the password either? Thanks.

Read other answers
RELEVANCY SCORE 77.2

Hi

I am wanting to send out either a tool or a script that will check all the desktops and laptops in my clients organization for a BIOS Supervisor password. They are all Lenovo Thinkcentres or Thinkpads running XP Pro. I think this is possible as i have IBM Standard Asset Manager installed on my Thinkpad and it scans for a Power On password and a Hard Drive password. I'm having trouble finding anything on this as every search i have done brings back info on cracking the passwords! There isn't even that much info about IBM Standard Asset Manager. Any help would be appreciated.

Thanks in advance

Read other answers
RELEVANCY SCORE 77.2

Hi, I found a script who update the BIOS password:***************************************************** '' Update Administrator Password'On Error Resume NextDim colItemsIf WScript.Arguments.Count <> 3 Then    WScript.Echo "SetAdminPassword.vbs [oldpassword] [newpassword] [encoding]"    WScript.QuitEnd IfstrRequest = "pap,"+WScript.Arguments(0)+"," + WScript.Arguments(1) + "," +WScript.Arguments(2)+";"strComputer = "LOCALHOST"     ' Change as needed.Set objWMIService = GetObject("WinMgmts:" _    &"{ImpersonationLevel=Impersonate}!\\" & strComputer & "\root\wmi")Set colItems = objWMIService.ExecQuery("Select * from Lenovo_SetBiosPassword")strReturn = "error"For Each objItem in colItems    ObjItem.SetBiosPassword strRequest, strReturnNextWScript.Echo strRequestWScript.Echo " SetBiosPassword: "+ strReturn'' Update Administrator Password'On Error Resume NextDim colItemsIf WScript.Arguments.Count <> 3 Then    WScript.Echo "SetAdminPassword.vbs [oldpassword] [newpassword] [encoding]"    WScript.QuitEnd IfstrRequest = "pap,"+WScript.Arguments(0)+"," + WScript.Arguments(1) + "," +WScript.Arguments(2)+";"strComputer = "LOCALHOST"     ' Change as needed.Set objWMIService = GetObject("WinMgmts:" _    &"{ImpersonationLevel=Impersonate}!\\" & strComputer & "\root\wmi")Set colItems = objWMIService.ExecQuery("Select * from Lenovo_SetBiosPassword")strReturn =... Read more

A:Do you have a vb script to set a new BIOS Supervisor Password?

It is not possible to set a password with the WMI interface when a password does not already exist.  This is for security reasons.  Otherwise it would be possible to have malware which runs in Windows, sets passwords that you don't know, and locks you out of your system. It can be done in DOS.  Some customers boot a DOS disk as part of their unboxing procedure to set a known password.  Then they can change it by WMI later (if they want to).  Some large customers order their systems from the Lenovo factory with a known password installed, talk to your account manager if you fall into that category.

Read other 9 answers
RELEVANCY SCORE 77.2

In the BIOS I set the password for supervisor and user but it is not getting activated. I do not know whether anybody has disabled it permanently. how to get it activated. Is there any command in the c prompt I should give. Earlier it was working.

Read other answers
RELEVANCY SCORE 77.2

Is there a simple way to remove or reset the supervisor password in BIOS?

Read other answers
RELEVANCY SCORE 77.2

I recently acquired a Lenovo W530, however on startup it is asking for a password to move forward. I got this password from my supplier, however when I go into the BIOS to turn off the password protection, it says 'Can't remove when Supervisor Password is set' - meanwhile the Supervisor password change option is greyed out. Is the password I have only the Power On password, with a separate Supervisor password that I don't have? Is there any way to remove the Supervisor password if you don't have it (other than replacing the motherboard)?

A:Supervisor Password greyed out in BIOS

Power on PW and Supervisor PW are different from each other, you can open your computer using power on PW but not on the other. I suggest you to contact the manufacturer directly and most of the time they can deactivate that PW on their end.

Read other 3 answers
RELEVANCY SCORE 77.2

Hello all,

I'm in a bit of a bind. I'm working on a computer that needs the boot order changed, so I can install an OS upgrade (2000 to XP Pro) and I can't get into the BIOS without the supervisor password. The individual who had/worked on the computer before has long gone, so that option is out. The default stuff won't work (admin, exec, password...and so on). I seem to remember that you can dislodge the battery, or switch the jumpers (although different motherboards might have different stuff), but It's been several years since I've had this problem and I can't remember the solution.

Any and all help would be appreciated.
 

A:BIOS lockout...need supervisor password

Not quite sure that'll be crackable. It'll depend on the mobo.
 

Read other 3 answers
RELEVANCY SCORE 77.2

Please, help me guys i have one big problem.Half year ago i set bios supervisor password because of my roommates.Now when i want to delete the password i can't Only ask for pass when i want to go on bios setup...Bad is that i can't do anything in my bios and i can't remove my password.Nothing! I removed batery from my laptop motherboard and nothing happens MSi GX660 btw...Is there any type of software to remove password?
Sorry for my bad english...Thanks in advance

A:Can't remove bios supervisor password, please HELP ME!

  
Quote: Originally Posted by Strahinja


Please, help me guys i have one big problem.Half year ago i set bios supervisor password because of my roommates.Now when i want to delete the password i can't Only ask for pass when i want to go on bios setup...Bad is that i can't do anything in my bios and i can't remove my password.Nothing! I removed batery from my laptop motherboard and nothing happens MSi GX660 btw...Is there any type of software to remove password?
Sorry for my bad english...Thanks in advance


Does this help;

Read other 8 answers
RELEVANCY SCORE 77.2

In the Thinkpad BIOS, is there any way to access the pre-boot environment with only the supervisor password if a HDD password is also set? I note that at least on my machine (X1 Carbon 5th Gen), with both a supervisor password and a hard disk1 user password set (I have set different passwords for each), I am always prompted first for the HDD password to enter any pre-boot environment, including:BIOS (pressing F1 at Lenovo screen)the boot order menu (pressing F12 at Lenovo screen)the boot options menu (pressing enter at Lenovo screen)However, for any of these functions, I am not accessing the disk drive and not booting into the drive, but rather trying to access only the pre-boot environment in the BIOS. So why does the system ask for the HDD password? I can see a scenario where perhaps one needs to boot via USB for troubleshooting, or the HDD password is forgotten or some other issue where only the BIOS needs to be entered and not the disk drive.  Is there perhaps a certain key press at the HDD password prompt to switch to a "BIOS only" mode? (I tried the various function keys at the disk drive password prompt, but it didn't do anything) Thanks in advance for any assistance!

A:Possible to access BIOS with only Supervisor Password?

If the HDD PW is forgotton the only way to get in is to pull out the drive

Read other 1 answers
RELEVANCY SCORE 76.4

I recently changed my BIOS password (aka supervisor password) on my ThinkPad T400 and I did not write it down. I do remember that the character limit for this password was short (maybe 6,7,or 8 characters long). If I knew the (default?) character limit or length I could rule out dozens of other passwords in my memory and gain access to my computer that much sooner. Ive read every manual and users guide for my laptop and there is no other method readily available, no bypass solution so it is imperative that I remember what I set.. Thanks for your time.
 

A:Supervisor(BIOS) password for Lenovo T400...

rillo31957 said:


so it is imperative that I remember what I setClick to expand...

Indeed it is. That's the only solution so there's nothing that we can do as we don't assist with password issues as per the site rules.

As a result I'm closing this thread.
 

Read other 1 answers
RELEVANCY SCORE 75.6

Hello, I wonder if anyone can help ?

We have just started to put a supervisor password onto our Tecra A11 laptops so our pupils cannot set passwords on the hard drive etc.

To get into the BIOS and set a BIOS password, we press F2 as the machine starts.
We then go into the security option, then supervisor password.
Having entered the password we want to use twice, we press F10 to save etc.

The machine starts ok and goes in to windows without a hitch.

The problem we have now is that we cannot get back into the bios at all.
As the machine starts we press the F2 key as before but unlike previously the screen just remains blank and the 'Toshiba leading Innovation >>>' screen no longer appears.

If we keep our finger on the F" key or keep pressing it the laptop just restarts without ever getting to the BIOS screen where I assume we will get asked for the supervisor password we set earlier?

Is there another key we should be pressing as the laptop starts ?

I should add we have added a supervisor password for the BIOS security screen on three of our laptops and all three have the same issue.

Thanks

Steve

A:Tecra A11-1EG - cannot access BIOS after setting supervisor password

I think this should be useful for you:
http://aps2.toshiba-tro.de/kb0/TSB0B032D0000R01.htm

In some cases you need to press the "INS" key while Toshiba logo appears.

Then a prompt for the Supervisor Password would appear and if the password is certified then the BIOS could be entered by pressing the "F2" key.

Read other 2 answers
RELEVANCY SCORE 74.8

 I bought this laptop from a used-laptop store and I only bought it because the BIOS where accessible and ready to use. I set virtualization to on and everything was great, even before I left the store. I also have a friend who loves his Lenovo T430. I told him about the problem and he said to just give Lenovo a call and they will know what to do. Of course there is no phone number I could find except sales, so I am hoping I can find a fix here. A little while ago I updated my T430 to BIOS Revision 2.7, and without my knowledge, in the process the update set a new BIOS Supervisor Password and it decided to disable virtualization extensions. Does anyone know how to fix this?Thank you.

A:T430 BIOS Update gave the laptop a Supervisor password

A BIOS update cannot create a BIOS password.  There is no backdoor password and no way to reset.

Read other 3 answers
RELEVANCY SCORE 73.6

Hi All,
I have a new (to me) pc. It is an HP Media Center PC. I believe it was manufactured sometime around 2005. Also, I just switched from Comcast Internet to Verizon Internet. I am having trouble sending email from Outlook 2003. I can get email but not send it. I've tried several things to resolve the problem but, usually, have no idea what I'm doing. I tried resetting the router user ID and password but don't know if that has anything to do with my problem. After I hit the reset button on the Verizon/Actiontec router I eventually got to a page, from Verizon, asking for a User ID and password but wasn't sure what to input. My PC was given to me by a friend who used it in a small business he owns. I believe there were other computers in his business network. Would that be the network the prompt is referring to? I don't have a user ID or password for that network but may be able to get them. There are also other Users in my house who are on the Verizon account that I use. I am not the primary account holder but am the person trying to set up the email feature. The other computers are a Toshiba laptop and a Mac. At this point I'm more confused than ever. I'd really appreciate some help. Any suggestions? Thanks!

A:Enter Network Password prompt won't go away

Quote:




I just switched from Comcast Internet to Verizon Internet.............I got to a page, from Verizon, asking for a User ID and password




You have to set up your router with your Verizon User Name (Email address) and your password. Verizon Support
You must also change your Email address and password in Outlook.

Read other 1 answers
RELEVANCY SCORE 72.8

I know there's been a few queries by people regarding this prompt, but all the ones I've read seem to be connected with Outlook or operating a laptop via wireless - neither of which I use/do.

The pop-up has just started appearing today and I have no idea why. I don't even know if I should have a username and password for this? No idea what it is.

Can anyone advise please?

Screenshot attached.
 

A:Solved: Enter Network Password prompt

Read other 12 answers
RELEVANCY SCORE 72.8

I've a Windows 7 Enterprise laptop that's connected to the company domain. Every time when the laptop is locked, I not only need to press Ctrl + Alt + Delete, I also need to press Enter in order to display the password prompt
From the question asked in the link below:
https://social.technet.microsoft.com/Forums/windows/en-US/1a6b3e6a-fc1b-4878-a774-d7c5088d9417/windows-7-ctrl-alt-delete-locked-but-logged-in-user?forum=w7itproinstall
Why is it by design? Dale Qiao just marked Les52's reply as answer. No explanation or whatsoever being given. I don't accept this kind of response and I request a logical explanation for this

Read other answers
RELEVANCY SCORE 72.4

Hi...i have a lenovo B590...this laptop was a gift ...two days ago i power up and no boot...shows boot option menu but no option get charge the system, also cannot boot from the usb key or cd room...i tried remove the battery (the two) but still no boot and the bios supervisor password still appear... anybody know a solution?

Read other answers
RELEVANCY SCORE 71.6

I had a strange set of circumstances today. I was trying to update my memory from 2 to 4g. My system would not boot with the new memory and the bios gave 3 beeps. After removing the new memory, the system would boot to XP but I had no video. I powered down and powered back up. I now had video but the system would hang. In Safe Mode, it would hang after the following entry system32/config/system. Note I never observed any windows error messages, just the hang.

I used the Recovery Console from an XP CD and did a chkdsk /r and chdsk /f
I also ran fixboot

None of these solved the problem.

I then ran fixmbr
Recovery Console displayed some kind of caution message that I had a "invalid" or something MBR and that it might prevent me from access partitions or something.

Well, I ran fixmbr anyway since i was out if ideas.

Now when I try to boot, it is freezing during the post process. When I hit F2 to enter the BIOS setup, it says "entering setup" but it never does. It seems to be hanging right after the drive detect process.
Note I have one standard IDE drive © and 2 SATA drives. Windows XP is installed on one of the SATA drives.

Any ideas? Let me know if you need any more info.

A:BIOS Hang, unable to enter BIOS Setup after running FIXMBR

This sounds more like a BIOS = hardware issue. Since you have been inside the case it is possible something got nudged loose. Re-seat your memory and video card if it is an add-on.

Read other 12 answers
RELEVANCY SCORE 69.2

I don't know how to call this thing but as i read on the internet, it talks about the bios setup. I merged the 2 partitions of my acer travelmate 2410 then i restarted and it says "NTLDR missing". So I tried to enter the part where i can choose what to boot (F2) but it does not function. I press Esc and all i got is a window that checks my computer specs then it goes to the window that has the message "NTLDR is missing". I cannot enter my bios setup to change bootable drive.... can somebdy help me about this please...

A:Cannot Enter Bios Setup

Hit the power on button and immediately tap the F2 key.
Ntldr missing:http://www.computerhope.com/issues/ch000465.htm

Read other 1 answers
RELEVANCY SCORE 69.2

Hello all,

Got a bit of a problem with a dell xps 400. The machine badly needs to be reloaded, so i have need to enter the setup utility to configure the raid controller so that XP setup will detect the HDD.

The problem is that the computer refuses to enter the Setup Utililty. I can select it from the boot menu, or I can press f2 at the dell POST screen, but in either case the computer will attempt to load BIOS setup, then act as if nothing happened and start to load windows. I have even tried removing all bootable media just in case, and when the standard "no system disk press F1 to retry or F2 to enter setup utility" message appears, i wil press F2 and the message will just repeat, over and over.

I have tried reflashing the BIOS to version A07 and the problem still exists. Without the ability to enter the BIOS setup utility and configure for windows setup the computer will eventually be useless.

HAS ANYONE ever experienced this before? I can only think its a hardware problem but other than refusing to enter the BIOS utility it works fine (windows only needs to be reinstalled because of the usual junk buildup but the pc is stable).

Any help is appreciated, this is driving me nuts.
 

A:XPS 400 will not enter bios setup

Try clearing the motherboard's CMOS by jumper or by removing the CMOS battery
 

Read other 7 answers
RELEVANCY SCORE 69.2

Hi there, i need to enter Bios setup but i'm unable to do it. I tried to press all the functions keys but there's nothing.Can someone help me please.Thanks

Read other answers
RELEVANCY SCORE 69.2

I am building a new system srounf an Intel D955Xbk motherboard and Pentium D processor. I have 2 GB of RAM, an ATI x1900 video card and a Seagate 250 GB SATA hard drive.

For some reason, I cannot enter Setup by pressing F2 during startup. Pressing F2 has no effect. I need to change some settings, but am unable to. Is this a problem with the board?
 

A:Can't Enter BIOS Setup

Read other 16 answers
RELEVANCY SCORE 69.2

Hello, my Thinkpad is a T520, running on OS Win10, BIOS is 8AET51WW (3.1) I can't enter BIOS setup of my lenovo t520. I tried pressing F1 with and without Fn, before and during pressing start button. It seems that F1 key doesn't work at all. I tested it while win 10 is running. Windows Help should start, but diddn't. All other F-keys are working. All Window- updates are up-to-date. According to Lenovo-Solution Center (3.3.003) all drivers are up-to-date. It is really annoying. My laptop starts automatically every morning at 4:30 and I would like to enter BIOS and change relevant settings. Any advise? Best,Gwin 

Read other answers
RELEVANCY SCORE 69.2

I can't  enter to setup with administrator password when I want to enter to setup it give to enter administrator password.( I forget it ) hp 255 g3 System Disabled : 67365449











Solved!
View Solution.

A:I can't enter to setup with administrator password

@taoufik? When asked for the password enter   78043489 REO

Read other 6 answers
RELEVANCY SCORE 68.8

I'm having a problem with a Toshiba Satellite L300D. After I reinstalled the HDD it would beep. To solve this I went into BIOS to look and see if the board had some sort of intrusion setting. When I exited the BIOS and restarted I know get the Enter Current Password (with a blue background on a black screen) with continuos beeps. The thing is it seems to auto enter in 10 characters (*) and then stop. There are no other options.

I have searched unsuccessfully for any info about this and I cant even find where the CMOS is located which I think is soldered onto the board.

Has anybody had any similar experience like this?
I would really appreciate any help its driving me crazy.
 

A:Bios Password 'Enter Current Password' on Toshiba Satellite

Your thread is closed. We do not help with password problems. This is clearly stated in the rules section.
Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.Click to expand...

Please read and follow the rules when posting.
 

Read other 1 answers
RELEVANCY SCORE 68.4

I have had this H50-55 for sometime, several years and suddenly it ask for a bios password when I try to enter the bios to change the boot order.  I have no clue what it is. I hate passwords and NEVER use one unless forced...What can I do?

A:Lenovo H 50-55 Bios password suddenly appears when trying to enter bios. I don't know it.

my guess is that your cmos battery died and it wants you to set day/time.  There is no backdoor password.  The choices are remember the PW or replace the motherboard.

Read other 1 answers
RELEVANCY SCORE 68.4

I have just purchased and installed a new intel d845wn mobo with a 1.7ghz P4, it all works fine but i cannot get into the BIOS.
The manual says hit F2 but that dosent seem to work.

Any Ideas?

Cheers
Dan.
 

A:How to enter BIOS setup on my new mobo

Read other 9 answers
RELEVANCY SCORE 68.4

I have an IBM thinkpad 600 laptop, It posts an error code 161 and 162. I hols pressing f1 key and power on but it does not enter the BIOS setup. Also I mesured the Battery voltage but it has the correct voltage level, 3V. any one can help me solving this problem. or at less tell me how to access this BIOS.

thanks,
Maher
 

A:Can't Enter the Bios setup (IBM thinkpad 600)

Read other 16 answers
RELEVANCY SCORE 68.4

After resolving an issue resulting from a printer installation, I was able to get my computer back to a state of normalcy, except that the CD drives were no longer found by the system.
This is a Win 2K and there is a DVD-ROM and a CD-RW.
So rather than do the smart thing and reinstall them via the OEM CDs, I went into the Bios and tried to tell the Bios that they were the Secondary Master and Slave drives (duh)
So now, the system hangs, telling me that the primary slave auto detect wasn't finding anything. (Even though I didn't address that when I screwed with it.)
I cannot even enter the BIOS setup, since the hangup occurs before the system even gets to that point.
If I can get back to BIOS setup, I can at least reset to defaults, then figure out how to do the right thing, but for now, I'm STUCK.

It's an MSI KT3 Ultra Motherboard
If more info is needed I can probably get it, but wanted to keep the initial post short.

Thanks for any help
 

A:Bios hangs - cannot enter setup

I had read through similar posts here and was going to remove the battery from the motherboard for 20 mins or so to reset the BIOS.
So I powered up and the startup hung again, so I left it for a bit and when I came back, the Bios screen was up and ready for me to reset!

Apparently, if there is a period of inactivity, the BIOS will reset itself and continue into edit mode.

I appear to be back in business without issue and strangeley enough, the reason I got into this mess - CD-RW and DVD-ROM not showing up - has also been resolved - they were detected and mapped as normal.
 

Read other 1 answers
RELEVANCY SCORE 68.4

I am assembling a new rig and can't enter the BIOS setup screen.

For initial testing, I have assembled the following components on a piece of cardboard (I have other HDDs and optical drives that I intend on installing later):

Asus P5LD2 Deluxe motherboard
Intel P4 650 3.4MHZ cpu with heatsink and fan
2x1024MHz OCZ DDR2 667MHz Gold Edition memory sticks
WD 2500KS 250GB SATA2 HDD
MSI NX7800GTX PCI Express Video card
Enermax Liberty 500W psu
Monitor
Keyboard

First I turn on the monitor, then the power (I was able to connect the case power and speaker wires to the motherboard).

This is what I hear/see:

1. Single beep.

2. IT8211 ATAPI BIOS V1.3.1.61
Copyright 2002-2004 ITE, Inc. All Rights Reserved.

Please wait for IDE scan.

3. IT8211 ATAPI BIOS V1.3.1.61
Copyright 2002-2004 ITE, Inc. All Rights Reserved.

Drive 0: Not Detected.
Drive 1: Not Detected.
Drive 2: Not Detected.
Drive 3: Not Detected.

4. SiI 3132 SATALink BIOS Version 7.2.18
Copyright 1997-2005 Silicon Image, Inc.

5. Single beep.

6. Flashing cursor for about 5 seconds.

7. Reboot and Select proper Boot Device
or Insert Boot Media in selected Boot Device and press any key.

I can't go any further.

Also, sometimes when I go through this process, the first thing that appears on the monitor is an image that says Asus P5LD2 Deluxe, but it only lasts for maybe 2 seconds. And sometimes during the above display, I see a brief message that says "Keyboard n... Read more

A:Can't enter BIOS Setup Screens

Have you tried to get into bios? Just checking, as you didn't mention anywhere above that you pressed the del key (it varies from bios to bios but I believe it is the del key for your motherboard).

Immediately after you hear the beep, tap your del key a few times and let us know how it goes.

You may want to clear your CMOS too, (read your manual on how to do this, but it involves moving the jumpers for a few seconds) as this may solve your checksum error.

Are the lights on your keyboard lighting up? Is it USB or PS/2? Try with PS/2 if you have it connected via USB (assuming USB isn't working).
 

Read other 5 answers
RELEVANCY SCORE 68.4

Hello,
I was upgrading a friend's Computer with a new CDRW ( Liteon52/24/52 and 128 Meg SDRAM. The Computer is an old Gateway, Pentium 433Mhz. I hooked everything up and then it started happening !
I started getting a weird error about " WIndows is not in good configuration" and so on. I checked all the connections, and everything is good. I have the Hard drive on Primary Master, CDRW on Secondary master and CD-ROM on Sec. Slave.
I disconnected everything and tried to put it back the way it was, but now I can't even access BIOS ! I keep hitting F1 and I see it blinking at the bottom " Entering set up" and then I get a long beep and then two short ones and a display on the screen :
" B: Error". I know that F1 is for entering BIOS because I entered it prior to install to see what the configuration was.
I tried to boot with a start up disk, and I get the same error," B: boot error, hit F1 to resume". If I do that then I am able to get to the set up screen, but if I try to access C:\ it tells me that " This program has caused a device flow error, please contact system vendor". I tried to boot with just the floppy and hard drive with the same result.
OS: Windows 98, BIOS Chip : Intel/AMI ? Hard drive: Quantum Fireball 13GB. Onboard LAN, Graphics and Sound

Please help before I have to replace this computer...
Thanks in advance
 

A:Unable to Enter BIOS Setup

Read other 16 answers
RELEVANCY SCORE 68.4

I have an HP pavilion P6725it (Now with windows 10). Worked perfectly for more than 5 years.My HP has this motherboard http://support.hp.com/my-en/document/c02668523 So I bought a video card Nvidia GTX1050ti to replace the ATI HD6750 in order to work at 3840x2160 60herz.After installing the Nvidia the system didn't boot and showed a blue screen with HP logo.I tried to enter Bios setup but was not possible. Pressing F10 I only got a black screen with white characters indicating the processor type, the size ofthe cache and the size of the ram. I just could switch off the PC.So I reinstalled the ATI and everything was working fine again. Then I made a bios update with thishttp://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_101150_1and everything was fine.Then I entered the bios setup and I changed the setting of the Integrated video from disabled to enabled. But with this change again the system didn't boot and furthermore it was no more possible to enter the bios setup to reset the previous setting (pressing F10 just black screen with white characters ).Then I also removed the ATI graphic card. But again, I only get the blue screen with HP logo or the black screen with white characters pressing F10. I also tried this: http://support.hp.com/us-en/product/HP-ENVY-Phoenix-h9-1400-Desktop-PC-series/5330769/model/5349882/...without success (black screen and white characters only) Now what can I do to boot or enter the bios setup ?Clearing  the CMOS ... Read more

A:I can't boot, and I can't enter the bios setup

You know the answer already.Clear the CMOS and you should be able to POST. The GPU that you have installed requires a powerfull power supply.I'd recommend a 650W power supply. However, I do not think that the system board of your PC would support or be compatible with 3rd party power supplies.

Read other 1 answers
RELEVANCY SCORE 68.4

I already clear the cmos but still i cant go to the bios setup, it pops up "enter setup password" i clear cmos but nothing happen, what can i do?

Read other answers
RELEVANCY SCORE 68.4

Hello there,I need to change a setting in the BIOS.(intel virtualization technology).I have not put a password in the BIOS since I bought my computer.I am sure.That's why I do not know the code. I tried many passwords I found on the internet.After 3 attempts, I get an error that I need to turn off the computer. It does not give an error code. System-halt says.  Windows 7 64bitBIOS: InsydeH2O Version 03.60.4240CN33WW (V2.19) You can tell me what else to report.Thank you from now.

Read other answers