Over 1 million tech questions and answers.



Hi, Would you please assist with code CODE 61AA, Thank you Menashe

Read other answers
Preferred Solution: CODE

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

A:BSOD PLaying League of Legends error code 0x0000001e a common code


Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


* *
* Bugcheck Analysis *
* *
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
2: kd> !analyze -v
* *
* Bugcheck Analysis *
* *
Driver Issues:


Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version

C... Read more

Read other 9 answers

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

Read other answers

Basicaly the title explain it all,can find the driver for on board audio device.
I just buy a second hand MBO.It is MSI Neo 4 H,MS-7125 Ver:3,Bios ver. V5.3 072106
Newly instaled Windovs 7 Ultima 64bits.
Trayed few diferent drivers non of them works,so probably is audio device gone.
Any sugestions?

Read other answers

up votdown

I need to know how to load tape from slot to drive in windows through code (cpp or powershell code). I have a VTL setup which has a single library containg 5 tape drives. I created 10 slots in that library through the
VTL. I am trying to find how to load tape from that slot to drive in windows. Thanks in Advance
I am using Cristalink's firestreamer to create VTL

Read other answers


I have been working patiently for the better part of three days, but cannot resolve the issue. I can no longer use Windows Update. Something seems to have happened on or after 19 July -- the final date that updates were installed. Thereafter, only failure messages in the log (now wiped clean, as a result of following one of the suggestions I found). When I click "check for updates", I receive a message that a problem occurred. The error code is 80072EE2
When I then click in that same window on "Check online for updates from Microsoft Update" I always get the message "Install new Windows Update software. To check for Windows Updates, you must first install an update for Windows Update. Install now." Naturally I click on this, only to receive error code 800F081F.

I have tried out several suggestions that did seemed relevant, including the 12 methods I found at
Windows Update service not running/ cmd says parameter incorrect - Microsoft Community

While trying to execute Method 5, I found that HKLM\COMPONENTS was missing from view. I found instructions on how to use Load Hive to make this visible again. No difference to Win Update.

I skipped Method 7, because my antivirus software is a MS product and has been in use for years, without any problems.

Method 10 proved impossible to execute: it seems to contain outdated information: you can no longer manually download these elements; instead you are redirected to a page that helpfully (irony)... Read more

A:failed new Windows Update installer code 800F081F after code 80072EE2

Sounds likely to be a malware infection to me.
The error code you are getting implies that WU cannot access the servers at MS.

Please download and install Malwarebytes Anti-malware (free version) from http://www.malwarebytes.org/products/malwarebytes_free/ - UNtick 'Enable free trial of MBAM Premium' at the end of the installation - and update it, then run a full scan in your main account, and Quick scans in any other user accounts.

Quarantine everything it finds

Read other 9 answers

After poking around on other threads, there's a chance this is related to the hardware drivers. However, I wasn't able to find a thread with this exact error code, so any help on what this means and how to correct it would be appreciated thanks! This is generating on a LENOVO ideapad Y700 series laptop (15 inch).


Go to Solution.


Update your Intel Video driver and the false error from LSC should disappear.WVC007002-UM7YSIw=windowsvc=video cardtest 007result code 002um7ysi is a hash code of the serial number of your machine and useless info<unless you chose to send feeback info to Lenovo

Read other 1 answers

I am receiving the titled errors during windows update, I checked at windows support and tried every answer given there with no success.
in addition, i think that this might be the cause that BattleField 3 crashes all the time.

A:Windows Update errors Code 800B0100 and Code 8007065E, tried everythin

First, check that teh file system and disk are OK
type in the Search box
right-click on the only file that is found
Select Run as Administrator
- the Elevated Command Prompt window should pop up
At the Command prompt, type
and hit the Enter key
You will be told that the drive is locked, and the CHKDSK will run at he next boot - hit the Y key, and then reboot. The chkdsk will take a few hours depending on the size of the drive, so be patient!

After the CHKDSK has run, Windows should boot normally (possibly after a second auto-reboot) - then run the SFC

SFC -System File Checker - Instructions
Click on the Start button
type in the Search box
right-click on the only file that is found
Select Run as Administrator
- the Elevated Command Prompt window should pop up
At the Command prompt, type


and hit the Enter key
Wait for the scan to finish - make a note of any error messages - and then reboot.

You will have seen that the SFC command leaves a log - please upload the CBS.log and attach it to your response (You will probably have to copy it to the dektop first)

Read other 9 answers

I seem to be having an issue with windows updates installing, im stuck at 14 important updates, and it says some updates were not installed, and gives me error code 80073712 and code 9c47.

A:Window's updates errors, code 80073712 and code 9c47

Please follow the instructions in Windows Update Posting Instructions and post the results.

Read other 7 answers

This is an excel question.

I have a macro (let's cell this macro1) which is run while sheet1 is active (sheet1 is named Main). When the code is runs, it transfers a subset of data from sheet1 to sheet2 (sheet2 is named Sub2). In the "View Code" area (actually in SelectionChange) in the tab for sheet1 there is some code (let's call this macro2). When macro1 is running and transferring the data, what I would like to do is for macro1 to also copy/paste the code for macro2 from the "View Code" the area of tab for sheet1 to the "View Code" area of the tab for sheet2.

I have no clue how to do this, or if it is even possible, and any suggestions would be very much appreciated.



A:Solved: view code of tab - automatically copy/paste code

So is the code actually on the "Sheet1" in the workbook and you want the code to once everything is copied go to "Sheet2" in the workbook? Am I understanding that correctly?

Read other 2 answers

Windows updates are not getting installed in one of  the Windows 7 Enterprise Edtion 32 bit machine. Downloaded updates and tried to install also did not install. I have followed few methods and it did not help. please help to solve the issue. 
Uploaded the Windows Update log in the 

Method 1
Executed the below command as administrator 
net stop wuauserv
ren SoftwareDistribution  SoftwareDistribution.oldd
net start wuauserv
Wuauclt.exe /scannow
wuauclt.exe /resetauthorization
wuauclt.exe /updatenow
net start wuauserv
Method 2
Executed the below command as administrator 
sc config winmgmt start= disabled
net stop winmgmt /y
cd %windir%\system32\wbem
ren Repository Repository.old
sc config winmgmt start= auto
net start winmgmt

Regards, Boopathi

Read other answers

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

Read other 2 answers

VS Code correctly announces update 1.24.1 is available. I click the Install Update button. Then I receive prompt to Restart Visual Studio Code to apply the latest update. After I restart VS Code, the update has not been applied, and I am again notified the
1.24.1 update is available. What gives here?
My VS Code identifiables:
Version 1.23.1
Commit d0182c3417d225529c6d5ad24b7572815d0de9ac
Date 2018-05-10T17:11:17.614Z
Shell 1.7.12
Renderer 58.0.3029.110
Node 7.9.0
Architecture x64

Thanks in adavance,
Sam Dawisha

Read other answers

I have a HP 522c AMD Athlon 2000+, running windows xp. There is an integrated video card that went bad. So in installed an AGP video card it is a 3D Prophet 4000XT 32 MB. Now that the card is installed when I have it activated there is a code 12 on one of the pci to pci bridges so that my network card in the other pci slots will not work. I have tried the network card on other computers and it works fine, i have also tried the video card and it works fine. I also tried other items in the pci slots while the agp card is in(modem, sound card) and i still recieve the same error. The card works when a pci bridge is enabled but only with the VGAsave driver and with very low quality. When i check the device manager while both pci to pci bridges are enabled, when i can only run the VGAsave driver, it says the there is a conflict under the I/O range with the VGAsave and an Pci to Pci bridge. Any windows updates just delets the pci to pci bridge listed in the device manager. And i have tried all the drivers i could from AMD, HP, Hercules. Any help would be welcomed on how to fix this.

A:Code 12 in xp on a Pci to Pci bridge, Recieve a code 12 error with video card

your hp box is not only engineered by hp (who tend to focus on low assembly costs) but is an oem build, thus severely limiting your options. a suggested next step would be to attempt to poke around in the bios setup utility and/or to try out a wider variety of cards/slot configurations. good luck.

Read other 9 answers

I am completely stumped by this problem. I will do my best to explain it and see what you fine folks can do.

I had an older bluetooth dongle, off-brand model, 2010-2011 year, that I installed on my new desktop computer. It worked, but sound quality on my Sony Dr-BT101 headset wasn't great. It worked well with my bluetooth-enabled phones and tablets, so I suspected the dongle. I bought a CSR8510 dongle, which came with a CSR Cambridge Radio Harmony software stack. I installed the software, and turned on the headset, paired it, but no sound came out of the headset. I went to Sound, saw no entries. Went to device managers and saw the parts in yellow. I tried to update the driver but all I got was Code 18 error and this weird message in the picture. I clicked on properties and saw this message.

The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.

I am stumped. I've tried uninstalling, re-installing, installing other Bluetooth drivers, waving a magic wand, none of it has worked. I'm thinking it's a problem with the Registry, but I am not sure how to proceed.

Any ideas?

A:Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Give this a try. It's free.
You do need to resolve those Other devices category issues.

Read other 1 answers

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

Read other 6 answers

I am having the typical black screen. I just want to see if anyone has a resolution to the problem before I have to spend money for a new one. I checked everywhere before I posted for help.

Thanks in advanced. Joe D.

Read other answers


Thanks for your time!

I apologize if this is the wrong place to present this!

Rescently, I found that there might be some BIOS code for an older motherboard at the following:

"BIOS updates are also available at Micro Firmware. Their internet address site is http://www.firmware.com/. You can also call them at 1 (800) 747-5465. "

Using the URL was useless plus any other URL links found on the Internet to a possible Micro Firmware web page was useless. Server off, site not found error messages.

Also, further information found on Micro Firmware is:

Micro Firmware
330 West Gray Street
Norman, OK 73069-7111 USA

Phone: 800-767-5465
Phone2: 405-321-8333
Fax: 405-573-5535

Using any of the phone numbers listed above is useless. No answer, fast busy tone, or recording that says "number is no longer in use".

This firm use to be readily available by phone but not so the last few days. And for how long I have no idea. So far I have not found any information on Internet searches, etc.!

Has the URL and phone number information changed or are they really out of business? Does anyone know the stauts of Micro Firmware?

Thanks for your time!


A:A BIOS code firm for older obsolete code.

Read other 9 answers

I currently have Win 7 Pro retail 64 bit installed on my system. I ordered a second copy of Win 7 Pro retail to install as a second instance on my system, then later deactivate that second instance of Win 7 and then install it on a new computer if and when
I buy a new computer. Unfortunately, what I received shows an OEM sticker inside what looks like a retail box.
If I change the current retail product key on my current installation of Win 7 Pro with the OEM product code, is the original retail code disabled or just deactivated? Will I be able to use the original retail product key on a future installation? I have
a few days to return the mislabeled Win 7 Pro OEM version, and then look to buy a Win 7 Pro retail version (a few of these left).
Note my current system is one I assembled myself from components I bought from various stores (motherboard, processor, video card, sound card, disk drives, case, fans, ... ).

Read other answers

Please help!

When I try to do my windows update it says 2 updates failed and windows updated encountered an unknown error. Code 800B0100 and Code 80073712.
When I click on view update history the errors that won't work are (KB2562937) and (KB976932)
I've used the System Update Readiness Tool when finished it said that the scan was complete. I tried to do the updates again and they still wouldn't work.
I then did sfc scan and it said corrupt files were successfully repaired, again I tried the updates, still the same errors.
I have also tried the fix it tool, I've tried downloading the update through the windows website and I've also tried the windows update troubleshoot tool, all have not worked either. When I tried the troubleshoot, 2 problems could not be fixed.

A:Code 800B0100 and Code 80073712 (KB2562937) and (KB976932)

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 1 answers

Can anyone assist? I'm not a programmer so please forgive me in advance.

Iíve tested the code below but itís not redirecting (no errors on the page) As an FYI, I tested only using two incoming links, I added the third elseif here for better clarification.


Need to capture campaign ID from print ads and/or direct links. An easy fix would be a tracking pixel on the page but our current analytics program does not provide it (canít purchase another program, our company is too invested in the current).


To just add another elseif expression for new print ads and/or redirects, i.e. until our analytics company develops a solution (simple as opposed to creating a sub domain w/ a redirect for each new incoming link)
Important Notes:

The code should be case sensitive because the incoming link may sometimes come from same domain but with a different campaign ID (see example below)

I did manage to capture the campaign ID using to two domain autoforwards but that will only work for one incoming link.



Print Ad URL #1 >>>domain autoforward>>> http://www.PurchasedDomain55.com/?utm_source=print&utm_campaign=PrintAD1 >>>php redirect>>> www.DestinationPage44.com/?utm_source=blog&utm_campaign= PrintAD1

Print Ad URL #2 ... Read more

Read other answers

Title says it all!Friend's G6 laptop is locked with a power-on password, long since forgotten.I've seen numerous threads started by people in the same situation; generally the OP posts a halt code and then someone in the forums responds with an unlock code.How are these codes generated and how can I generate my own code unlock code?  

A:Please explain the halt code/unlock code procedure?

Hi: You can do it yourself from the link below... https://bios-pw.org/

Read other 1 answers

I need to create an input mask to force the person entering data into my access database to enter 4 numbers for the post code. I also need the 'Post Code' column in the table to display four zero's by default. I've tried entering 0000 as the default value and tried changing the 'Data Type' from Text to Number but to no avail. I'm really only a noobie when it comes to Access so any help would be appreciated!

A:Solved: Input Mask for Post Code (Zip Code)

Read other 6 answers

I haven't been able to update Windows for a while now. There are 13 updates that cannot download.

I have Error code 800B0100 and Error code 8024200D

Please help ASAP.
My CBS file is too large to post, what should I do?

A:Can't update Windows Code 800B0100 and Code 8024200D

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

Read other 9 answers

I have a CZ-17 laptop (from iBuyPower, subbrand of MSI I hear) running Windows 7 64x SP1.
The keyboard and touchpad both stopped working after I cleaned my registry with CCleaner and defragmented the OS partition of the HDD with Defraggler. (The defragmentation process has not been interrupted.)
The ELanTech Touchpad
The touchpad icons have not been loading in the task bar tray at startup. Neither could I manually start the applications associated with the touchpad from my Program Files on Drive C. 
Here is what I have tried without results:
1. Switch on the touchpad with the designated laptop function key combination (Fn + F3)
2. Restore the system to an earlier point.
3. Uninstall the device from device manager, restart and let Win7 install the right drivers and what not.
4. Install various drivers, including manufacturer recommended.
As of now the touchpad is hidden in the device manager and is marked with an exclamation sign. Under properties I see : This device is not present, is not working properly, or does not have all its drivers installed. (Code 24). 
I am using a USB mouse as I write this.
The Laptop Keyboard:
The keyboard stopped working at the same time as the touchpad (after registry cleaning and defragmentation).
Most of the time I was able to use a USB Keyboard to be able to try to fix the problem. A few times, however even the USB keyboard would not work. I noticed that w... Read more

A:Laptop keyboard and touchpad not working (code 19 and code 24)

I would recommend performing a repair installation of the operating system, since you used the registry cleaning portion of CCleaner.In addition to Broni's link Bleeping Computer DOES NOT recommend the use of registry cleaners/optimizers for several reasons:Registry cleaners are extremely powerful applications that can damage the registry by using aggressive cleaning routines and cause your computer to become unbootable.The Windows registry is a central repository (database) for storing configuration data, user settings and machine-dependent settings, and options for the operating system. It contains information and settings for all hardware, software, users, and preferences. Whenever a user makes changes to settings, file associations, system policies, or installed software, the changes are reflected and stored in this repository. The registry is a crucial component because it is where Windows "remembers" all this information, how it works together, how Windows boots the system and what files it uses when it does. The registry is also a vulnerable subsystem, in that relatively small changes done incorrectly can render the system inoperable. For a more detailed explanation, read Understanding The Registry.Not all registry cleaners are created equal. There are a number of them available but they do not all work entirely the same way. Each vendor uses different criteria as to what constitutes a "bad entry". One cleaner may find entries on your system that will not cause problem... Read more

Read other 5 answers

Im locked out of laptop dont know administrator password disable code is 78730603 . please help

View Solution.


Hi, Enter  67698225 Regards, DP-K

Read other 5 answers

When posting code, please try to avoid linking to a file or files off-site. To make life easier for our volunteers, please instead copy and paste the code directly to your message. Thank you!

Edited by Cookiegal to add:

When posting your code, please be sure to do the following:
Use code tags so the format appears correctly (otherwise the board software may insert unwanted spaces)

Explain exactly what it is you're trying to accomplish.

Mention the programming language you're using as it's not always obvious to those trying to help.


Read other answers

Just got this result. What does this mean??Thanks!

Read other answers

My HP 110 mini is asking for current password ,which I can't remember system haulted CNUOO4OCTX

A:How to enter a code and whst code for a hp 110 mini system ...

@Jaysshop? Enter     e9ljjvjea4      ( Note that in both cases, the 3rd character is a lower case L )                        or                e9ljjvjear Regards, DP-K

Read other 7 answers

Admin password or power on password1st is how do I disable it all together?2nd thing I need system disable code # 54575104

A:System disable code error code

@Shuwat66? Please enter            41453120 Regards.

Read other 2 answers

what in the unlock code for half code 86248125?

A:what in the unlock code for half code 86248125?

@GMommaG? Enter   39120101 Regards, DP-K

Read other 1 answers

Error Code C00D1199 (aka: code 80040265) is an error message that can be displayed in several different ways and can be worded different as well, but it all refers to this error message originally posted as message 80040265.

There were a few posts on here about them, but many of the threads seemed to be closed. I just noticed that I have gone through all of the motions and really tried, but no pickle here....well, there might be a pickle, but it is the kind of pickle you get stuck in and is not cool whatsoever.

Here is what I have done:

1. Made sure that the format was supported with windows media player. It was, as it is an .avi, so no problems there.

Here are the types that are compatible:
.au and .snd
.aif, .aifc, and .aiff
.mp3 and .m3u
.mpeg, .mpg, .m1v, .mp2, .mpa, .mpe, .mp2v, and .mpv2
.mid, .midi, and .rmi
.avi and .wav
.asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx
2. I made sure that other .avi's I have in my collection were working properly with the WMP (Windows Media Player). They were, just not the ones I was trying to fix, of course..

3. I made a sandwich and drank some Yoohoo.

4. Installed a sturdy set of codecs with DivX to ensure that that was not it. I know I had to do it before, but I recently cleaned and started my PC from scratch again, so the previous codecs were not there.

5.Made sure all of my audio devices and drivers were updated and installed properly-for the most part-which I ... Read more

A:Error Code C00D1199 (aka: code 80040265)

Welcome Miss Haley, have you read through some of the suggestions here? They seem to have some detailed info on the error code C00D1199 (aka: code 80040265)

I use the free "Jet Player" and love it - whether it's movies or music - there's not much it won't play or burn, (runs circles around WMP)
Hope this helps

Read other 1 answers
A:I need the halt code for my computer the code is 655659008

@Datniggah Recheck your code??? REO

Read other 3 answers

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7

Read other answers

I cannot install IE 9 because I need to update windows 7 first and I get this message:
Some updates were not installed. Failed 6 updates.
Errors found Code 8000FFFF Code 9C6

I have tried many of the suggestions I have read here - including 'Fixit' which tells me the problem is corrected - but I have not been able to fix this problem.

I appreciate any suggestions!

Read other answers

Hello Sevenforums community, my pc has been running into some problems, but this is nothing new. This usually happens when I'm playing games like blacklight retribution, or skyrim. Another case would be when I'm just using firefox, but it is very rare that it crashes. When I do Crash I usually recieve the a code. Sometimes, now a little bit more often, I recieve these other codes.

This was my most recent crash:

BCCode: be
BCP1: FFFFF8A000E471A0
BCP2: 5850000217969121
BCP3: FFFFF8800D6737E0
BCP4: 000000000000000B
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

My computer:
Operating System
Microsoft Windows 7 Ultimate 64-bit SP1
AMD Phenom II X4 965 40 ?C
Deneb 45nm Technology
8.00 GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
TF-TV3207E* ([email protected])
AMD Radeon HD 6900 Series (Gigabyte) *Have trouble with ATI drivers, I'm using the one windows supplied me with*
Hard Drives
932GB Seagate ST31000524AS ATA Device (SATA) 29 ?C
Optical Drives
ELBY CLONEDRIVE SCSI CdRom Device *This is a virtual drive*
High Definition Audio Device *I just use a pair of headphones* And sometimes my audio wont work, I would have to move the end of the cable time to time.

A:BSODs, BC code varies, code 1e, a, and others

Here are some dump files, I forgot to add them.

Read other 5 answers


i heard that its possible to add part of assembly code into a c program.

anyone knows how to go abt doing it?

A:adding assembly code into c code

I think it may depend on what compiler or link library you are using, but when I need to put assembly for a micro into C code, it goes:
assembly code
#pragma ENDASM
The micro is the M16C/60 series.
For the 68HC11:
assembly code
It might say your embedded manual or in your compiler help file....not sure.

Read other 1 answers

I am not sure which category this goes into???
But how to I get the
img code and the HTML code turned on in my profile?
Thanks in advance
Shadow Bea

A:HTML code & img code in profile

Read other 9 answers

Hi, I think I did a lil mistake when I reformatted my pc.

Does any one know how to change the area code on the pc?

Once I refromated my pc. In one of the process in XP setup I think I typed in the zip code instead of the area code. If anyone know how to change it please tell me!

If not Im just going to reformat it tonight

A:Area Code? Zip code... mistake!

I trying to think what difference that would make. Are you having a problem?

Read other 2 answers

d version of windows 10"?
socan u please help me....
My code is:
package First;

import org.openqa.selenium.WebDriver;
import org.openqa.selenium.edge.EdgeDriver;
import org.openqa.selenium.edge.EdgeOptions;

public class Demo {

// TODO Auto-generated method stub
public static void main(String[] args) throws InterruptedException {
// TODO Auto-generated method stub
System.setProperty("webdriver.edge.driver", "C:\\Users\\Ganesh\\Downloads\\MicrosoftWebDriver.exe");
        WebDriver driver = new EdgeDriver();
        driver.manage ().window().maximize();



Read other answers

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

and sfc /scannow

copy/paste the results please.


Read other 1 answers

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers

is there any way i can actually edit the source code in mozilla firefox without having to save the .txt file to my computer?

i tried editing it....typing is disabled for me.

Here's an example:

if it's my website...
in IE i can View the source code and then edit what I want. I then save it, and refresh in my browser. Then all the changes I made in the source code appear on my website. Can you do this in Mozilla Firefox.

if you can't do this with firefox, then does anyone know a feedback site for Mozilla firefox?

A:View-->Source Code, Can you edit source code in firefox?

No, "View source" means "View source" not Edit source. Looks like you're gonna have to either save to txt/html or use IE to edit. Sorry.

For support: http://forums.mozillazine.org/

Read other 1 answers