Over 1 million tech questions and answers.

Which RAM can I use for Tecra 8000

Q: Which RAM can I use for Tecra 8000

Hello,

does anybody know wihch RAM I need for my Tecra 8000
I need the PA Number

with kind regards

RELEVANCY SCORE 200
Preferred Solution: Which RAM can I use for Tecra 8000

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Which RAM can I use for Tecra 8000

Hi

The Tecra 8000 is an oldie and therefore it needs RAM modules which are not more used in most notebook models.
As far as I know you need the 144-Pin PC100 SODIMM module.

The part number of 128MB is PA3005U

Bye

Read other 2 answers
RELEVANCY SCORE 66.8

I read this forum and searched Google, but nothing helps.

I think the HDD on Tecra 8000 ( Pentium II , 266 Mhz ) is "dead".
I tried to replace it with one from another laptop to see if that would work.

The laptop doesn't recognize it, although I put everything back as the original.
Is there a special way or do I have to change something in the Bios?

A:Tecra 8000 does not recognize new HDD

Hi

The BIOS settings don?t need to be changed?

As long as you use the compatible HDD, the BIOS should recognize the HDD automatically without any big troubles?
What HDD did you use? What size, interface, etc?

The Tecra 8000 is a oldie? and I think you could use only the 4GB; 6GB; 9GB; 10GB; 14GB IDE HDDs.

Bigger HDDs would be not recognized by BIOS.

Read other 1 answers
RELEVANCY SCORE 66.8

I refurbushed a TECRA 8000. When I start it up the screen displays Sytem Failure and prompts me for a password. Do you know if there is a system default? I can't even enter CMOS to set the boot order to reload the OS. Thanks for your help.

-mc
 

A:TECRA 8000 password

If you can find the jumper on the mobo to reset the bios - try that.

Or else remove the cmos battery for 20 or so minutes & replace.

That should reset the bios & wipe the password.

abbyk
 

Read other 2 answers
RELEVANCY SCORE 66.8

Anyone know where I can get a driver disk for this Toshiba Notebook? Tecra 8000

In particular I need the monitor LCD driver
 

A:Tecra 8000 Laptop

Read other 10 answers
RELEVANCY SCORE 66.8

hi all

So as you see in the description i have a VERY old toshiba tecra 8000 and it had windows xp on it but now it has a lot of corrupted system files on it and i am trying to install xp back on it but when i try to boot it it gets through the boot process and just shows the blue and gray background and will not go any further.
Any ideas?

A:Toshiba tecra 8000

Are you booting from Windows XP CD?

Read other 10 answers
RELEVANCY SCORE 66.8

Hey does anyone know where i can get CD-ROM drivers for a Toshiba Tecra 8000? I can't find them on Toshiba's website.
 

A:Tecra 8000 CD ROM Drivers

You shouldn't need drivers, a CDROM is universal.

If you think this is incorrect you can start by telling us what symtons you are experiencing.
 

Read other 2 answers
RELEVANCY SCORE 66

Hello, I have a Tecra 8000 laptop 400Mhz, 128MB Ram, Win 2k pro. I was given a 128 MB RAM chip and I installed it and I had no boot up. I took out the chip and restarted the computer and I still don't have boot up also no display. I pushed the reset button and yes, you guessed it, no boot up. Is there any other tricks I can try?
Rick
 

A:Tecra 8000 No Boot after Ram upgrade

Hi there -

By "no boot up", do you mean it hangs, or do you not even have power? If you have power, have you double checked your original RAM to make sure it is seated properly?

Hope that helps.
 

Read other 3 answers
RELEVANCY SCORE 66

Hello, what kind of device do I need in order to connect an old Tecra 8000 hard drive to a notebook from an other manufacture?

I just want to transfer some data but the ac connector on the Tecra no longer works.

A:Tecra 8000 - How to connect HDD to an other notebook?

Hi!

You can use an external HDD case with USB port for this.
The external HDD case should be for 2.5? HDD?s and with IDE interface. That?s all.

Contact your local computer dealer. I?m sure they will have such cases.

Bye

Read other 1 answers
RELEVANCY SCORE 66

It's running so slow, that I can't use it effectively.
It is a 266 Mhz, with 192 Mb ram.
Bios is 9.30
It was upgraded to Win 98 SE, after I boobooed the registry and the bios was flashed to 9.30.
Since I got it back, it is so slow that I really can't use it.
It takes about 10 minutes to boot up.
I have the factory configuration CD that installs Win 95 and all of the Toshiba drivers and defaults.

What do I need to do, before trying to run the configuration CD?
 

A:Toshiba Tecra 8000-Too Slow

I think it's time for you to get yourself a new PC, my brother uses a PII 350 with 64mb RAM for his work and I often hear him yelling through his wall that it's too slow or has buggered up/crashed for some reason. Look on Ebay for a good cheap one, it sounds like you use yours for work. ANything with 256mb RAM and a processor of at least 1ghz (for value for money) will be more than capable. It could be that loads of crap has been left behind by WIn95 in the install of 98. Did you format the hard drive before you installed it?
 

Read other 2 answers
RELEVANCY SCORE 66

I screwed up some things in the registry and lost my CD drive.
Prior to that, it was running fine, with win 98.

A tech worked on it and installed Win 98 SE.
Then, it started running very slowly.
He got rid of my IR and Parallel port, to free up some IRQ's, installed my Xircom Ethernet card and got the CD working again. I'm not sure which CD controller it should need but this one has the EIDE controller configured now.

I'm looking for a source for Toshiba Tecra 8000 software and manual that came with the Tecra.
I'm also seeking ideas to speed it up.

I'd just like to have the same speed I had to begin with.
 

A:Toshiba Tecra 8000 PII 266 Problems

tecra PII 8000

There is a guy on ebay that sells a recovery disk for the tecra 8000 PII 266.
My neighbor gave me the very same model and I ,needed to dump the system my regular kill disk would not work on it for some reason. Anyway go to ebay type in toshiba tecra 8000. The guy I got the disk from is called Mr. Canada. It worked for me the only thing is that it loads windows 95. I did put XP on mine after the drivers were in place. It does have all the factory drivers. Hope this helped.
 

Read other 2 answers
RELEVANCY SCORE 66

Hi all,

I have recently been asked to look at a friends' Tecra 8000 (PII 233) and to give it a bit of an update.....Not sure why as the most I have ever done is to add a few small components to my home PC!!

My question is is it possible for a broadband connection to be established - I have looked all over the notebook, but cannot find anything that would suggest that it can be done.
Also what other upgrades should (can) we look at.

Sorry for the noobness, but any help is greatly appreciated.

Thanks

Ben

A:Tecra 8000 and broadband connection

Wow? this is really an oldie?
By broadband do you mean the LAN port?

As far as I know the Tecra 8000 was not equipped with LAN port.
It?s really unbelievable but this is a fact?

However, if you would like to use LAN then I recommend buying a PCMCIA LAN card (Cardbus 32-Bit) which would allows you to connect the Tecra 8000 to LAN.

Cheers

Read other 16 answers
RELEVANCY SCORE 66

Hi

I've tried to recover with CD. The manual says press and hold "C". It's not possible to press and hold "C" while booting, the machine beep and beep fast.
What can I do?
Hope someone maybe had the same problem
Thanks

A:How to start recovery CD on Tecra 8000?

This with C at start up should work. I just hope you use right CD.
Do you have CD1 and CD2? Be sure you use CD1 at first.

You can enter BIOS and set optical disc drive as first bootable device.

Read other 7 answers
RELEVANCY SCORE 66

hi there!
i dont know much about computers but ma toshiba tecra 8000 wont start.
it keeps going to a screen that says Windows had a problem so inorder to protect memory (or sumthing) it wont start. then it says sumthing else about going to the bios settings and alterint the cache memory...

HELP!!!!

thanx much

A:cant start my toshiba tecra 8000

Duplicate

http://www.techsupportforum.com/f10/...-a-257199.html

Read other 1 answers
RELEVANCY SCORE 66

hi there!
i dont know much about computers but ma toshiba tecra 8000 wont start.
it keeps going to a screen that says Windows had a problem so inorder to protect memory (or sumthing) it wont start. then it says sumthing else about going to the bios settings and altering the cache memory...
so what shld i do to get it working again and what is the problem.
it runz on xp.

HELP!!!!

thanx much

A:cant start my toshiba tecra 8000

First, press F8 when starting the computer. It will then display a list of startup options. You want to disable the automatic restart. That will allow you to see the error code it's giving you long enough to write it down (make sure to include the number). Then post that information here for futher help.

Have you tried starting in Safe Mode?

Read other 1 answers
RELEVANCY SCORE 66

What I want to do is to create an image of the current OS partition with the Ghost 2003 DOS utility loaded onto a CD instead of a floppy.


I have borrowed an old Tecra 8000 from my gal friend. It has Win2k Pro installed.
After d/l'ing a pdf of the manual, It seems that it originally came with Win98 installed.
The manual says to use the "Companion Diskette" to enter DOS.
The only diskette d/l I can find is for Win 98/Win98se.

So, my questions:
1. Will the Win98 diskette work with Win2k?
2. Preferably, how can I open a CD with DOS before the OS starts up?
I can get into startup.But, that doesn't seem to allow me to access the CD Rom drive.

Hopefully it is an easy process that I'm just too blind to see.
Thx

A:Tecra 8000 with Win2k - How to start up in DOS?

I don't know that ghost tool exactly, but first of all that disk should work with Win2k too. To access that CD, DOS cd-driver must be on that disk and normally they are, if it is an official ghost tool disk.
Try this and if this won't help, you may make your CD bootable. Check google how to do so. There are several instructions for this procedure.

Read other 2 answers
RELEVANCY SCORE 66

Hi im new to these forums came here looking for help.

Ive had this laptop for a while recently bought some upgrades for it, before the parts arrived i tried to change the bios password to somthing different, well i restarted and it would no longer accept the old password...nore the new one.

Parts came in and for weeks ive been stuck at the password screen.
Purchased "http://cgi.ebay.com/TOSHIBA-Tecra-8000-8100-8200-BIOS-Password-Removal-Key_W0QQitemZ170022133942QQihZ007QQcategoryZ40177QQssPageNameZWDVWQQrdZ1QQcmdZViewItem"
Was a scam and never came in the mail.

I have been told a program "keydisk.exe" or somthing can bypass the bios password, but we have a problem, my laptop does not have a floppy drive.

So heres where you get to help me , im thinking about purchasing an external floppy drive (usb connected) to try to use that "keydisk.exe".

Will i need to install drivers for the floppy drive? Im running winxp sp2.
Thanks for your time,

~phr34k
 

A:Hello need help with Toshiba Tecra 8000 Laptop

Still looking for answers!
 

Read other 2 answers
RELEVANCY SCORE 65.6

The CD-ROM of my Tecra 8000 has a defect. It tries to load a CD-ROM, LED is blinking, it stopps and then the drive LED is permanently on.
So i assume the drive is busted.

What kind of new CD-ROM is fitting to this laptop ? Only Toshiba original ones ?

A:Tecra 8000 - CD-ROM defect - fitting new drive ?

Hi

Wow, the Tecra 8000 series is really old. Are you still using this notebook?
It feels like the notebook would come from the Stone Age ;)

However, I think the CD/DVD drive supports *IDE* interface but not all drives would be compatible because of the slave/master/cable select settings

It looks like DVD-ROM drive +Toshiba - SD-C2002+ would be compatible.
Not quite sure if you will be able to get such drive because of the device age but probably the Toshiba authorized service provider in your country could provide some compatible optical disk drives?

Read other 3 answers
RELEVANCY SCORE 65.6

I just went out and bought a laptop for a good deal. It's a Toshiba Tecra 8000 jthat runs on a Pentium II. My question is how do i install a 128 MB RAM chip into the laptop. I opened the back and I see slot A and slot B. Am I doing this right? I'd appriciate some help.

thanks!
 

A:How do i install a 128 MB RAM chip into a Toshiba Tecra 8000?

I must have added 128mb of ram to mine, because I now have 192mb.

I bought the ram chip from Toshiba.

It was pretty simple to install, I belive I just put the 128 chip in the second slot.
 

Read other 2 answers
RELEVANCY SCORE 65.6

Hi all!

I had a probelm with the battery of this laptop. It wouldn't charge, so I bought a new one.

Surprise: it doesn't charge too!

The system recognize it for a little while and just after 20 second or less the battery disappear into the battery manager.

What happens?

Do you have suggestions?

Ciao,

Domenico.

A:Battery doesn't charge on a Tecra 8000

Possibly there is something wrong with the power supply electronic.
So maybe you should ask an ASP for a check.

Read other 2 answers
RELEVANCY SCORE 65.6

Hello, I've got a toshiba tecra 8000 (pII 300/T13.3/6/64/CD).
It recognizes the cdrom and the windows2000 installprogram starts up.
But after it has read in all the drivers from the windows cd it fails to install "Cant find any harddrive".
I've looked in the BIOS setup but it don't make me any wiser, it can't find the HD there either (surprise). Any advice on what I can do?
/Alex
 

A:Toshiba Tecra 8000 - Can't find harddrive!

Read other 6 answers
RELEVANCY SCORE 64.8

My AC Adaptor no longer works on my laptop and I believe there must be a short in it. I have successfully used an AC adaptor for the past two years and it became more and more positional. I attempted to remove the surrounding case and a hundred screws removed later, cannot access that area of my computer. I even had someone who knows more than me make the attempt, but found it futile. He suggested I get a schematic which would tell me how to get to it. I bought the computer used with no manual.......can anyone help.............PLEASE!! Thanks
 

A:Need Toshiba Tecra 8000 Model PAT800U schematic

In general even with a new laptop you are not going to get a "schematic" from the manufacturer as opening the casing would void the warranty. Have you tried the clips holding the keboard down? There are probably more screws under there.
 

Read other 2 answers
RELEVANCY SCORE 64.8

I searched in this forum for a solution to update the BIOS without a floppy drive. The only one i found was this thread [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66966&tstart=0] , but there is no .iso file for the tecra 8000 series.
is there any solution to get the new bios installed on my tecra 8000 without any floppy drive ?

A:BIOS Update for Tecra 8000 without Floppy Disk

I have checked Toshiba BIOS download page on http://www.toshiba.eu/innovation/download_bios.jsp and TRAD BIOS version is offered. This old Tecra is maybe 10 years old and at this time Toshiba has offered traditional BIOS update only.

Win versions are offered later with newer Tecra 9000/9100.
Sorry.

Maybe stupid question now but why do you need BIOS update?

Read other 1 answers
RELEVANCY SCORE 41.6

I possess a tecra A10 complete with Windows Vista Business installed (and backed up to an image file using Easeus Todo backup


However I also have access to a Tecra M10 which came with no operating system, although the COA sticker (product key) is likewise for a windows Vista Business.


My question is: would my Windows Vista Business back up from the A10 work on the M10 (ie would it load onto the M10 hard drive and then work properly

If anyone can advise on this matter I would be appreciative please

Best wishes
Ian

A:Can I use Tecra A10 OS disk to install OS on Tecra M10?

At first I must say that Toshiba recovery image is created for each notebook model separately and it is 100% created to work on specific model. Why?
Every notebook model has different hardware platform and all drivers, tools and utilities for certain model are part of recovery image. These recovery images are also tested.

Generally speaking if both models have identical hardware platform (hardware parts) it can be used.

Read other 4 answers
RELEVANCY SCORE 38.4

Dear forum
The above says it all really.

I see the two look similar, but one is smaller. Are these two models different in other ways please.
Ian

A:Difference between Tecra A10 and Tecra M10

Of course the both notebooks are different.
There are different Tecra A10 models and there are different Tecra M10 units.

For example:
Tecra *A10-13B* supports an Intel Core 2 Duo P8400 2,26 GHz CPU and Intel GM45 chipset.

Tecra *A10-1D2* supports an Intel Core 2 Duo T9600 2.80Ghz CPU and Intel GM45 chipset

You can find details about different discontinued notebook models here:
http://www.toshiba.eu/discontinued-products/
Then you can compare all the hardware parts.

Read other 7 answers
RELEVANCY SCORE 37.6

I need to know if -HP Radeon HD 4650 Graphics Card - ATi Radeon HD 4650 725MHz - 1 GB DDR2 SDRAM 128bit - PCI Express 2.0 x16 - DisplayPort, DVI-I-Intel Core 2 Quad Q9650 Processor 3.0 GHz 12 MB Cache Socket LGA775are both compatible with my HP 8000 elite compq SFF

Read other answers
RELEVANCY SCORE 37.2

NO grafics either on board OR grafics card that came with it but not installed. fresh install of win 7 pro 32 bit. cannot test it without grafics. solutions please? [Personal Information Removed]

A:elite 8000 cmt

There is a slight contradiction.  How could you install a fresh WIN7 if the video does not work, or was this after the install? 

Read other 1 answers
RELEVANCY SCORE 37.2

I have different operating systems on the same network. Most PCs are running Windows NT4.0, but a couple have Win2K (the server is NT). Recently I tried to add a network printer to two Win2K machines -- initially it didn't work. I downloaded a new driver and now they work fine -- except that now none of the NT machines can print to that printer -- they all get the same error: No create RWFactory: no create function for class with ID 1012 (ox3f4).
 

Read other answers
RELEVANCY SCORE 37.2

One of my friend bring his laptop ( dell inspiron 8000 ) to me.But before, he tried to reinstall his OS.But he screw up.Then he formated the HDD.I installed OS.Everthing is fine but NIC.I don't know which NIC installed.I tried all drivers from dell's website but it didn't work.Other thing only 3com drivers show up in device manager but it gives error code 10.Does anybody know that which NIC installed for dell inspiron 8000?Thank you.
 

A:inspiron 8000

If you go to Dells site and put in the Service Tag number of the computer, it will tell you what network card you have in your computer.
 

Read other 2 answers
RELEVANCY SCORE 37.2

I am planning on adding an SSD to my desktop. I am running Duo Core Intel 3.16  E8500, with 16 G of ram, my BIOS is 786G7  v01.02  10/22/2009   Do I need to update this? If so how?  Machine runs perfect now just want more speed. Thanks

Read other answers
RELEVANCY SCORE 37.2

elite 8000 cmt. I had a hard drive failure and when I replaced th hard drive with known good ones, all I can get is pxe:e61. My boot order is dvd,usb,hdd,network. Cables are all plugged in well and dvd drive is working. Any ideas?

Read other answers
RELEVANCY SCORE 37.2

Upgraded to XP (after a LOT of time, confusion, errors and virus removals) but my DVD/CD ROM is no longer worker. Microsoft says it's compatible but I tried to find updated driver on Microsoft and Hitachi with no success. Any suggestions?

A:Hitachi GD-8000 DVD/CD ROM

http://www.hitachi.us/Apps/hitachicom/cont...forbus/Storage/I checked several sites, but also found no drivers listed. A few questions: Does XP see the drive in device manager at all? Do you have multiple hard drives in this computer? What was the dvd drive's old drive letter?ThanksRigel

Read other 3 answers
RELEVANCY SCORE 37.2

THIS IS A VIDEO CARD...


 

A:The Voodoo 6 8000

I think that someone posted this on the old forums like 2 years ago or something. I knew it was something someone had knocked up on Abode Photoshop then as well....
 

Read other 10 answers
RELEVANCY SCORE 37.2

What is the best graphics card I can use without upgrading the processor, motherboard, or any other parts in HP 8000 Convertible Minitower (CMT) /Core 2 Duo E7500 ( 2.93GHz )/ 4GB/ 160GB HDD











Solved!
View Solution.

A:hp 8000 elite cmt

Hello Drakens1991 Welcome and Thank you for posting your query on HP Support Forum You can use the Graphics Card given below which are recommended by HP. Nvidia GeForce 310 DP PCIe x16 Graphics CardNvidia Quadro NVS 290 Graphics CardNvidia Quadro NVS 295 Graphics CardNVIDIA NVS 300 PCIe x16 512MB Graphics CardNVIDIA NVS 300 PCIe x1 512MB Graphics CardATI Radeon HD 4550 Graphics Card*ATI Radeon HD 4650 DP (1GB) PCIe x16 Graphics Card You can see these details in quickspecs as well and the link for the quickspecs:http://www8.hp.com/h20195/v2/getpdf.aspx/c04287230.pdf?ver=1 ****Click the Kudos Button on left to say Thanks****Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.Thank You,K B T 86Although I am an HP employee, I am speaking for myself and not for HP

Read other 3 answers
RELEVANCY SCORE 37.2

I have a DLT 8000 (40/80 GB) which does some peculiar things.

When I switch it on with a tape in it I get an a light display or "error-message" (up to 8 double-flash lights of all indicators down the left-hand side of the unit after which the unit returns to normal function) however the interesting thing is that this ONLY ever occurs when a tape is write-protected (indeed ALWAYS when the tape is write-protected). The behaviour is identical regardless of whether the tapes are Win2K/NT or Legato backup format and regardless of whether they are being tested independently or attached to a server.

I acquired a second DLT 8000 drive and tested that.

The "error message" occurs on both units only when tapes are write-protected and never when I they are not. There are no other signs of error on either unit and both drives, whilst second-user, were replaced due to upgrade to Super DLT not because of head wear.

Additionally I have performed a small backup sets on tapes that apparently caused the error after allowing them to load write-protected (generating the "error message") and unlocking the write-protect tab. No issues were encountered.

Can anyone shed any light on this?
 

Read other answers
RELEVANCY SCORE 37.2

My HP Workstation 8000 will not boot. I was downloading a torrent, and then opened the .avi file, and it told me to go to torrentm8.com to decrypt the file. I went to the site, didn't download anything, and the computer just froze. (could this be multiple trojans.avi?) I had no option but to turn it off. Now it will not boot, nothing on the monitor, though fans and drives are running. I would have made the HD a slave in another computer to save the data, but no one else seems to have internal SCSI. What can I do? I really don't care about the data anymore I just need the computer to work.
 

A:HP Workstation 8000

Malware wouldn't cause hardware failure. If the system won't even post, I'd say it's a very bizarre coincidence.
 

Read other 2 answers
RELEVANCY SCORE 37.2

I have a zd8000  what is the max. ram this will take. Thanks   











Solved!
View Solution.

A:what is the maximum ram for the zd 8000

zd8000 is more like 2009 or so. Here is the Service Manual: Manual The series started out as a Socket 775 Pentium 4 machine but I believe by the end of the run, with a BIOS update you could actually use Core2 Duo processors in it and it could take up to 4 gigs of RAM and run 64 bit Windows. The model numbers ran up into the zd8400 range, if I recall. They are enormous machines which are essentially desktop computers in a laptop case but lots of room in there so easy to disassemble and work on.  There should be a tag on the bottom with the full model number. The Manual does not really describe the later versions very well. It is a pretty rare beast, you do not see very many of them. 

Read other 6 answers
RELEVANCY SCORE 37.2

I bought a MOTOROLA CPX 8000 at a gov. auction,only because it was dirt cheap but honestly I have found very little info on it and I am not sure what I can do with it "if anything". If someone knows anything about this I would be very greatfull for some info. If you need to know anything about it just let me know . thx for the help
 

A:Motorola CPX 8000?

Anyone even know what this might be used for only info I found said for instant messageing in a small business, but thats all I seen.it's a

MOTOROLA CPX8000 COMPACT CHASSIS MODEL CPX8216 that's just like it.
 

Read other 2 answers
RELEVANCY SCORE 36.8

I tried to pug in my sata 3 windows 7 drive but it won't boot properly.Other drives have worked. Do I need a separate sata3 controller card?

A:HP Compaq 8000 Elite PC

What do you mean by " I tried to pug in my sata 3 windows 7 drive but it won't boot properly."? PLease explain with more details on what your SATA 3 Windows drive is? If it is a SATA drive with a Windows 7 operating system on it that came from  another PC, it is unlikely to boot to a Windows login.   

Read other 2 answers
RELEVANCY SCORE 36.8

My HP COMPAQ Elite 8000 running window 7 suddenly extremely slow. It just occurred the last two days. I checked Sophos and there were two Quarantines but was cleaned by the system. It is still extremely slow whenever I open a window. It's taking ten time as long as it was 3 days ago. Please help with this problem.
thanks,
 

A:HP COMPAQ Elite 8000

What's the part/product number(P/N) on that HP Compaq 8000 Elite?

Does it have a convertible minitower or small form factor or ultra slim desktop case?

---------------------------------------------------------

Download and save the TSG System Information Utility (SysInfo.exe) file.

After it's been downloaded and saved, double-click it to run it.

Information about your computer will appear.

Return here to your thread, then copy-and-paste the ENTIRE text here.

---------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 36.8

Hi I recently purchased this used inspatation 8000, worked fine for a few days now when it starts up after windows gets done started that is and before i can access any programs i get this blue screen with the error states stop: 00x000000F4 (0x00000003,0x81981790,0x81981904,0x805F9F88) please i'm a dummy but could someone tell me what this means and what to do to get it up and running again. Thanks
 

A:insparation 8000 xp problems

Sounds like a failing hard drive as heat is an issue...you could try installing Speedfan to monitor heat and fan speeds but it may not work on a laptop unless there are bios reading for health it can read. http://www.almico.com/speedfan.php
I would also try elevating the back of the Notebook with something to see if it can better breathe and avoid this.
 

Read other 3 answers
RELEVANCY SCORE 36.8

I am new here I would like to thank anyone in advance that could help me
with a master password sercive tag DC9NM01-595B express service code 29039982625 Thanks!
 

A:Dell 8000 Password

is it a d800? have a look here:
http://www.techspot.com/vb/topic90285.html
and here:
http://www.download.centre4service.com/
in the shorting method section
 

Read other 1 answers
RELEVANCY SCORE 36.8

I am 8000 miles from home and I use my cpu to speak with my family. I have been unable to speak with them for a week now and this is why.

OK I have a new toshiba A205-S6808
When I turn on my laptop I get the msg saying

WINDOWS ERROR RECOVERY
launch startup repair (recommended)
*The problem started after I connected a flash drive.*
* I am using Windows Vista.*

So for example startup repair: after checking my system for problems and attempting repairs it keeps going to the black screen and at the bottom of the black screen it says:

MICROSOFT CORPERATION with the loading bar over it.
That is as far as it will go. It has stayed there for hours. (since I gave up and went to sleep)
The OS is still there since it comes up in safe mode.

The startup repair cannot repair this computer automatically.
Problem Signature:
Problem Event Name: StartupRepairV2
" Signature 01: AutoFailover
" " 02: 6.0.6000.16386.6.0.6000.16386
" " 03: 2
" " 04: 65537
" " 05: unknown
" " 06: NoRootCause
" " 07: 0
" " 08: 2
" " 09: WrpRepair
" " 10: 2
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033

The Startup Repair diagnosis and repair details:

Root cause found:
U... Read more

A:8000 miles from home

panamag741,

Sorry if this is an obvious question - but did you remove the flash/removeable drive and attempt to reboot? Have you tried bringing your PC up in Safe Mode (Press/Hold F8 BEFORE Windows starts to boot and pick "Safe Mode" from the menu).

With the flash drive(s) removed, boot, press/hold F8 and try "Last known good configuration".

Let me know.

- John

Read other 19 answers
RELEVANCY SCORE 36.8

Hello everyone,
I just purchased a new Dell XPS 8000. I have been experiencing BSOD very frequently, usually couple times a day. I called their customer support, however they only ask me to run the diagnostic program which scans the hardware and concludes everything is fine. He also remote debugged my mini dumps and concludes it is a driver problem. However, updating to the newest driver does not solve the problem. I used sfc /scannow to scan the system, there is no integrity violation. So, is my problem caused by hardware? or software?
I have included the specs and two mini dumps I have.
Specs:
1 224-6177 Studio XPS 8000
1 317-2644 Studio XPS 8000, Intel Core i7-860 processor(8MB Cache, 2.80GHz)
1 317-2645 3GB DDR3 SDRAM AT 1066MHZ-3X1GB
1 330-3828 Dell Consumer Multimedia Keyboard, US
1 320-7810 No Monitor
1 320-0844 1024MB nVidia GeForce GT220
1 341-0262 500GB Serial ATA II Hard Drive 7200 RPM
1 330-4490 Dell Resource DVD with Application Backup
1 420-6576 DELL WELCOME,Software Dimension/Inspiron
1 420-8873 Dell Dock Consumer
1 420-6436 PC-Restore, Dim/Insp
1 421-0323 Windows Live Search,Multiple User Interface
1 463-2282 Dell Owners Manual installed on your system,click on icon after system set-up to access
1 330-6097 You have chosen a Windows 7 System
1 421-0092 DELL-DOWNLOAD-FLAG
1 421-1603 Genuine Windows 7 Home Premium, 64bit, English
1 421-2087 eBay Webslice
1 330-3826 Dell Studio USB Optical Mouse
1 410-1867 ADOBE READER 9.0 MULTI- LANGUAGE
1 313-8760 16X DVD+/-RW
... Read more

A:BSOD on Dell XPS 8000

if its still under warrenty take it back

Read other 6 answers
RELEVANCY SCORE 36.8

The USB ports on my dell studio xps 8000 keep dying. the light on the mouse stops working, unplug it and plugging it back in usually fixes it. there's also the sound its makes when you unplug from usb then plug in. sometimes I only get the sound which freezes the cursor then it working again. other time mouse is completely dead (no light) passes dell full tests says nothing wrong

Read other answers
RELEVANCY SCORE 36.8

We have an HP8000 elite (sff). I recently installed a power supply. When I turn the machine on, there are a series of 4 1-second beeps. This cycles 5 times with the red blinking power light. I replaced the power supply; same result. I replaced the mother board; same result. I tried both power supply and mother board with no components attached; same result. What should I do?
 

A:HP 8000 power on issue

Welcome to TSG

4 beeps are indicating a power supply issue of some kind, or the motherboard is NG.

But try reseating all memory modules. Check all cables if they are connected to the right position and pull/insert these cables again. Check out the manual
http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01941953-2.pdf
 

Read other 1 answers
RELEVANCY SCORE 36.8

Apologies that I am very basic with PC problems. I have a HP Compaq 8000 SFF PC
clicking loudly (begins about 5 minutes after power on).

Sound seems to be coming from the front of the PC (?sound card?).

Pretty sure not the Hard Drive, as I've swapped round a few times.
I've all but given up trying to make a guess as to what it is, but what I did was buy another
working same model PC as a replacement, thinking I might be able to interchange parts (?)
to tell what is the culprit in the faulty PC.

I have recorded the sound here:
https://app.box.com/s/5jjvylb742dqjqo4xxkruaamqx4392t3 Clicking noise in HP PC
Can I please ask the advice of anyone out there with far more knowledge than me what it could be.

Thank you in advance, Maryanne.
 

Read other answers