Over 1 million tech questions and answers.

Windows Update Failure to install, error code 80070308

Q: Windows Update Failure to install, error code 80070308

Hi
Windows Update has been trying to install the same 9 updates now since yesterday. Prior to that it's updated with no problems. It goes through all the motions, including having to restart the computer to finalize the updates and it goes through that also, then the Update window says it failed and the error code.
WU then starts the whole thing all over again. Right now it's still on my taskbar and the restart button on the pc has the WU icon ready to finalize after restarting.

I've followed the directions in the Windows UPdate Posting Instructions.

Error code: 80070308

Enclosed is the sfcdetails.txt

I cannot upload the CBS.zip though. I've tried several times and it's not completing. After a few minutes waiting while it says 'File uploading...please wait' the little window goes from that file attachment to a generic page saying
This page cannot be displayed.
<LI id=task1-1>Make sure the web address http://www.sevenforums.com is correct.<LI id=task1-2>Look for the page with your search engine.<LI id=task1-3>Refresh the page in a few minutes.

Thanks

RELEVANCY SCORE 200
Preferred Solution: Windows Update Failure to install, error code 80070308

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows Update Failure to install, error code 80070308

llanita take a look at this Windows 7 update fails with code 80070308 - Microsoft Community

Personally I set my updates to let me know they are available and I look at them before I install anything. But it is a personal choice my thoughts are that given updates can cause problems I like to know what I have downloaded and then can go back to dedicated update points get rid of problems. see pic

Having posted the above I think these would not be a bad thing to try

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f option in Option 2 ifnecessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer ? delete any rubbishthese find.

Read other 9 answers
RELEVANCY SCORE 101.6

Hello Friends,
I've been dealing with this error for about two months now. It took me that long until I found this site. Any way, I've run the SURT, The sfc scan, both completed successfully. I am not uploading my CBS.zip file because it's 35MB. If I need to cut it down please let me know how. Error code screenshot attached. Thanks.
Mike Delasandro

A:Windows Update Error Code 80070308

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 5 answers
RELEVANCY SCORE 100.4

My windows update fails all the time.It comes to the end and then fails. Picture 1
I have tried microsoft fix it ”says it fixed 2 treats" but update fails again. Picture 2

I have tryed to do it manual, both with case 4 and without but
4 it reads but do not find
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe qmgr.dll
9 it don't read and don't find
regsvr32.exe msxml.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe initpki.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wuweb.dll
regsvr32.exe muweb.dll

Tried Windows update standalone fix it still fails

I have tried SFC Scan report attacht

any surgestions

A:Windows Update Fails w error code 80070308

There's no obvious problems (apart from your errorcode) in any of the data posted.

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)
Please also post the C:\Windows\windowsupdate.log file.

Read other 9 answers
RELEVANCY SCORE 100.4

Since mid February, all of my Windows update patches have continually failed with and error code of 80070308. I have never had an issue with any Windows Updates prior to mid February. I am running Windows 7 Professional SP1 64 bit. I have a newer Dell XPS8500 machine with 32 GB RAM and an Intel Core i7-3770 CPU @ 3.4 GHZ. The following updates continually fail:

Cumulative Security Updated for IE 11 for Windows 7 x64 based systems (KB2909921)
Security Update for Internet Explorer 11 for Windows 7 for x64-based Systems (KB2909210)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1
for x64-based Systems (KB2898857)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for
x64-based Systems (KB2901112)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for
x64-based Systems (KB2911501)
Security Update for Windows 7 for x64-based Systems (KB2912390)
Security Update for Windows 7 for x64-based Systems (KB2916036)
Update for Windows 7 for x64-based Systems (KB2843630)
Update for Windows 7 for x64-based Systems (KB2919469)

I tried running the "Fix it" program recommended in the MS troubleshooting link, but that did not help. I have also tried installing with Norton 360 turned off (both virus protection and firewall). Any help that you can provide would be most welcome. Thanks in advance!

Bruce


Code:

Diagnostic Report (1.9.0027.0):... Read more

A:Windows Update Fails w error code 80070308

Please follow the Windows Update Posting Instructions and post the requested data

Read other 1 answers
RELEVANCY SCORE 100

I posted this yesterday, but as this was my first post in the Windows 7 forum, I was instructed that I did not include all of the required information. I closed the old post and am re-posting with all of the required documentation.
=================================
Since mid February, all of my Windows update patches have continually failed with an error code of 80070308. I have never had an issue with any Windows Updates prior to mid February. I am running Windows 7 Professional SP1 64 bit. I have a newer Dell XPS8500 machine with 32 GB RAM and an Intel Core i7-3770 CPU @ 3.4 GHZ. The following updates continually fail:

Cumulative Security Updated for IE 11 for Windows 7 x64 based systems (KB2909921)
Security Update for Internet Explorer 11 for Windows 7 for x64-based Systems (KB2909210)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1
for x64-based Systems (KB2898857)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for
x64-based Systems (KB2901112)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for
x64-based Systems (KB2911501)
Security Update for Windows 7 for x64-based Systems (KB2912390)
Security Update for Windows 7 for x64-based Systems (KB2916036)
Update for Windows 7 for x64-based Systems (KB2843630)
Update for Windows 7 for x64-based Systems (KB2919469)

I tried running the "Fix it" program recommended in the MS ... Read more

A:Cannot install Windows Updates - get error code 80070308

I had trouble putting the CBS logs in my original post so I am adding them in this reply.

Read other 3 answers
RELEVANCY SCORE 93.6

Since the newest 9 Security Updates I am not able to install them anymore.

The Error I get is: "Code 80070308 Unknown Error"

These Updates are failing:

KB2962872
KB2961072
KB2971850
KB2972280
KB2973201
KB2973351
KB2952664
KB2966583
KB2973337
sfc /scannow did not find any problems.
Also CheckSUR din't find any errors.
The CBS Folder as a *.zip archive here: http://ags-server.de/CBS.zip
(it's too big for uploading here)
Thank you for any help - I don't want to make an InPlace Upgrade because of a lot of problems in the past (The Computer was very slow after a repai install).
MfG,
Anon

A:Update Error Code 80070308

There is getting to be a rash of this error code this week!
(this is the third in 24 hours - and it's always been rare until now).

Here's the error sequence for yours.

Code:
2014-07-10 03:01:32, Info CBS Exec: Staging Package: Package_129_for_KB2973351~31bf3856ad364e35~amd64~~6.1.1.1, Update: 2973351-333_neutral_GDR, PinDeployment: amd64_92685b594b803139ca03aacd81219449_31bf3856ad364e35_6.1.7601.18496_none_ac5748f9a5bfe380
2014-07-10 03:01:32, Info CSI [email protected]/7/10:01:01:32.865 CSI Transaction @0x17b1880 destroyed
2014-07-10 03:01:32, Info CSI 0000002a Transaction merge required, do-not-merge flag passed.
2014-07-10 03:01:32, Info CSI [email protected]/7/10:01:01:32.865 CSI Transaction @0x17b1880 initialized for deployment engine {d16d444c-56d8-11d5-882d-0080c847b195} with flags 00000002 and client id [79]"TI3.30383066_2080273629:3/Package_for_KB2973351~31bf3856ad364e35~amd64~~6.1.1.1"
2014-07-10 03:01:32, Info CSI 0000002c Performing 10 operations; 10 are not lock/unlock and follow:
StageFile (2): flags: 8 app: (null) comp: Microsoft-Windows-Security-Schannel, Version = 6.1.7601.22712, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral file: [ml:26{13},l:24{12}]"schannel.dll" srcfile: @0x6719d88
StageFile (2): fla... Read more

Read other 9 answers
RELEVANCY SCORE 92.4

Hello,

Running Windows 7 Pro 64bit Service Pack 1
So, I have been getting code 80070308 for the last month. I did try windows "fix it", Downloaded "SURT" and ran SFC as Admin. I even tried a clean boot running only Windows programs at startup.... nothing. Still getting the error.

On a side note, I believe the 2 updates that first failed (which I have since hidden) were KB3035573 (recomended) and KB2990214 (important) Update Log attached

A:Error Code 80070308 for all KB..... update since end of March

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 1 answers
RELEVANCY SCORE 91.2

Good Afternoon,

I am also having problems installing updates with the error code 80070308.

I have spent this afternoon reading the other posts and following the Windows Update Posting Instructions thread so hopefully I've gathered has much info as I can.

I downloaded and ran the System Update Readiness Tool. Once the installation was complete I tried to reinstall the updates. This resulted in the successful installation of: Hotfix for Windows (KB947821) but the failed installation of the other 9 updates as before.

Attachment 325390

And I received the following error code.

Attachment 325391

I then carried out the sfc/scannow which all came back OK.

Attachment 325392

I have saved the logs as a zip file but its too big for me to upload (12.5MB)? Any suggestions?

I hope I have not missed anything out. But please bear with me if I have.

Any help/advice would be appreciated.

Thanks in advance.

Kerry

A:Failed to install updates: Error Code 80070308

This is becoming a common problem with the latest batch of updates - MS are looking into it (we are led to understand)
I'll add this thread to the action-list for our contact.

Read other 7 answers
RELEVANCY SCORE 91.2

Hi,

Since 10/07/2014 I am having serious problems with 9 updates in Windows Update.
I just took a look at some other topics in this forum section and it seems I am not the only one having these problems.

I've already tried several things i've found on the internet, but nothing really nothing worked out for me.
I've tried the hotfix, didn't work out; i've tried multiple CMD commands, didn't work out; i've tried to rename the catroot2 folder, didn't work out either...

Is this problem common? Because most of the updates are important; so i'd like them to be installed and they keep on failing every day since then.

If I need to post or upload something, please tell me, because i'm not a computer expert ;-)

Thanks in advantage,
Blizzard9041

A:Failed to install 9 updates: Error Code 80070308

Please open an elevated Command Prompt, and run the following command,

REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG QUERY HKLM\COMPONENTS


post the results.


Here are some instructions to make life easier

1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.

Read other 5 answers
RELEVANCY SCORE 85.6

Helping a friend with her pc, for the last 3weeks she's not been able to successfully complete an update, the downloading of updates work fine, but once it gets to the installation phase, it errors out with Error Code 80070308 (9 updates failed) (her pc has been running fine otherwise, and had windows updates set to automatically check & install.)

I've tried the update fix it tool - http://diagnostics.support.microsoft...no=1&_ext=.exe

Windows update diagnostic - http://download.microsoft.com/downlo...nostic.diagcab

the rediness tool (choosing windows 7 64bit - Fix Windows corruption errors by using the DISM or System Update Readiness tool
sfc scan now
rebooted, but no luck
I've read all info here Windows Update Posting Instructions and i tried multiple times to upload the .CBS Zip, but there seems to be a problem with that as well(see pic)


The pc runs flawlessly, only issues are the failing of updates, and now the upload error shown in screenshot
Security essentials is installed, and quick, and full scans have been ran. i've also installed avg (disabling essentials) and tests are clean there.
Thanks in advance

A:Windows 7 Pro 64bit Error code 80070308

Please open an elevated Command Prompt, and run the following command,

REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG QUERY HKLM\COMPONENTS
post the results.
Here are some instructions to make life easier
[IMG]file:///C:/Users/NoelAsus/AppData/Local/Temp/msohtmlclip1/02/clip_image001.gif[/IMG]
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.

Read other 9 answers
RELEVANCY SCORE 81.6

Windows Update is not working. I researched the web and tried a number of fixes for this error code without result. I would greatly appreciate your assistance in resolving this issue. All of the information regarding the laptop I'm using is in my profile. Thank you.

Beau Worsham

A:I need help with Windows Update Error 80070308

Please open an elevated Command Prompt, and run the following command,

REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG QUERY HKLM\COMPONENTS
post the results.
Here are some instructions to make life easier

1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.

Read other 9 answers
RELEVANCY SCORE 81.6

I've been unable to download and install Windows 7 updates because I keep getting this error. Updates download, appear to be installing, but when I get to 100% this message keeps popping up.
 
I've seen people posting "fixes" but I'm also aware that sometimes these fixes are machine specific, and I don't want to get myself into more trouble than I already have.
 
Can anyone help?
 
Thanks!

A:Windows Update Error 80070308

Sorry, I probably should have mentioned I'm using Windows 7.

Read other 2 answers
RELEVANCY SCORE 81.6

Suddenly today (7/9/14) Windows 7 has decided it won't update and gives the 80070308 error. I have tried Googling for a solution but can't seem to find much other than the RegistryReviver program pop up on all the threads. I use the free version of CCleaner to periodically clean up the Registry. The 80070308 error seems to be a common problem and has been around for a long time based on the items Googled. Before I restore the system from a backup from a month ago is there a better solution to this problem. I have attached a screenshot of the Windows Update Log. It would appear that one of the updates on 7/9 caused the problem? Help would be greatly appreciated.

A:Windows Update Error 80070308?

Hello Ken429 . Please post per this : and see what some experts can sort out for you.
Windows Update Posting Instructions

Read other 9 answers
RELEVANCY SCORE 81.6

I got this Error after trying to install July 2014 Updates. Some updates installed successfully though.
When I click retry it'll download again with slightly bigger size and 99% progress (The last time I click retry until about 200MB or so).

These are the logs and screenshots after I cleanup the SoftwareDistribution folder and retrying the installation some times

A:Windows Update Error 80070308

...and the rest of the requested data - the CBS.log and CBSPersist CAB files?

Read other 9 answers
RELEVANCY SCORE 81.6

Hello Everyone,

Thank you in advance for your assistance in this very frustrating matter:

I have a Windows 7 64 bit home premium pc and 37 updates waiting to be installed but keep getting error code 80070308. Fix-it does not find anything. SFC /scannow did not find any integrity violations.

Attached is a screenshot. Any help you can provide would be greatly appreciated.

Thank you,
Milan

A:Windows update error 80070308

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

Read other 9 answers
RELEVANCY SCORE 81.6

For the last two weeks I have been unable to install windows updates. When I attempt to install updates the installation process appears to proceed normally cycling through the updates. However, once the process completes all updates are shown to have failed and the following message is displayed:

Code 80070308 Windows Update encountered an unknown error.

I have attached the CBS log data.

A:Windows Update Error 80070308

You appear to have IOBit software installed - I would suggest attempting to UNDO whatever it's done, and then uninstalling it completely.

As far as Windows Update is concerned...

Try this...
Open an Elevated Command Prompt, and run the following commands...

REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG DELETE HKLM\COMPONENTS /V PendingRequired
reboot and then attempt Windows Update again.

Read other 3 answers
RELEVANCY SCORE 80.4

Hi,

For the past 2-3 weeks any attempt at installing windows updates has been failing, with the error code 80070308. I'm using Windows 7 Home Premium 64 bit, the updates currently trying to install are:

I've tried the generic solutions I've been able to find, Microsoft repair tools etc, with no luck. Any help would be appreciated.

A:Windows Update Failing - Error 80070308

Here's a sampling from your CBS log...

Code:
2014-08-07 10:49:10, Error CSI 00000047 (F) A previous transaction requested a reboot, so you cannot commit any transactions until you reboot.
[gle=0x80004005]
2014-08-07 10:49:10, Error CSI 00000048 (F) STATUS_REQUEST_OUT_OF_SEQUENCE #387385# from Windows::COM::CComponentStore::ApplyTransactionNow(...)[gle=0xd000042a]
2014-08-07 10:49:10, Error CSI [email protected]/8/7:09:49:10.404 (F) d:\win7sp1_gdr\base\wcp\componentstore\com\store_transaction.cpp(1841): Error STATUS_REQUEST_OUT_OF_SEQUENCE originated in function Windows::COM::CComponentStore::ApplyTransactionNow expression: (null)
[gle=0x80004005]
2014-08-07 10:49:10, Error CSI 0000004a (F) HRESULT_FROM_WIN32(ERROR_REQUEST_OUT_OF_SEQUENCE) #387246# from Windows::COM::CPendingTransaction::IStorePendingTransaction_Apply(...)[gle=0x80070308]
2014-08-07 10:49:10, Error CSI 0000004b (F) HRESULT_FROM_WIN32(ERROR_REQUEST_OUT_OF_SEQUENCE) #381337# from Windows::ServicingAPI::CCSITransaction::ICSITransaction2_AddFiles(Flags = 1, a = @0x38cd30, fn = @0x38d530, fp = @0x38dd30, disp = 0, op = 0)[gle=0x80070308]
2014-08-07 10:49:10, Info CBS Failed to add to transaction package: Package_130_for_KB2973351~31bf3856ad364e35~amd64~~6.1.1.1 [HRESULT = 0x80070308 - ERROR_REQUEST_OUT_OF_SEQUENCE]
2014-08-07 10:49:10, Error CBS Failed to stage execution package: Pa... Read more

Read other 5 answers
RELEVANCY SCORE 80.4

Everytime I try and load windows updates I get error message 80070308.

Now have 24 updates which cannot be loaded.

Also cannot download iTunes as I get the same 80070308 error message.

Tried to follow some of your previous threads recommendations without success.

Desperately need help as the Windows website is useless

Read other answers
RELEVANCY SCORE 80.4

Just recently, I've been receiving error codes 80070308 along with error 9C59 when attempting to perform Windows Update. I'm not entirely too sure when this problem began since last months updates installed successfully and I haven't been able to install any updates since then. Attached is the most recent CBS log.

I have already run the SURT twice.

Could you help me?

Attachment 329703

A:Windows Update Error 80070308 and 9C59

Your CBS log is showing lots of this type of error.

Code:
Line 147559: 2014-08-18 13:51:45, Error CSI 0000013e (F) STATUS_REQUEST_OUT_OF_SEQUENCE #1265671# from Windows::COM::CComponentStore::ApplyTransactionNow(...)[gle=0xd000042a]
I've seen this before - and fixed it - but now forgotten how I fixed it

Back later when caffeine starts working!

Read other 9 answers
RELEVANCY SCORE 79.2

Windows Update Failure - Error Code 80073712 . tried everything under the sky. forusm say abotu deleting the pending.xml file , but there is no such file under winsxs folder (windows\winsxs) . The os is VIsta X64 and if we go into windows update screen we see that all teh updates have failed to install. When we try to download the Windows Update Manager for vista x64 while copyign files it gives the same error code. We have even tried running sfc /scannow , it takes some time , completes the verification (100 %) and says that it found corrupt files but failed to reolve the issue. Please suggest..

Just to update we have also tried the following fix :

regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll
regsvr32 wuweb.dll

still no joy...
Sorry to keep on updating the post .... we have norton internet security on the system. we have not tried disabling the firewall before attempting to register the above files. however , we received no error messages while registering the files. we got confirmation after every file registration that the dll file has been registered successfully

A:Windows Update Failure - Error Code 80073712

I think there is no more step left in the course book .. hence no replies... no worries , i am making our friend run a factory image restore on the hard drive. Windows Mail as always gave me some hiccups while exporting the messages as it came up with an error which said that the external HDD where i was saving the file , was running out of space (Genius!!! , the external HDD has 195 GB of free space and the file we were copying is 296 MB ) or the messages are corrupt. I then had to turn off the UAC, copy the actual Windows Mail folder at a differet location on the HDD and change the file attributes and finally it got copied on the external drive manually(Microsoft should have had reasons to release Widnwos 7).... neways i thank all the viewers for passing by the post and pray to God that i resolve the issue as early as possible.

Read other 10 answers
RELEVANCY SCORE 79.2

When i try installing Kernel-Mode Driver Framework version 1.11 update for Windows 7 it always fails and gives me an error 8007007e and i honestly dont know what to do. I've been googling aroudn the internet and everything either didn't work or didn't make sense to me and i'm not a tech geek or even near that, so i really need some help.

i am unable to upload my cbs.zip aswell because it exceeds the max mb.

Update for Kernel-Mode Driver Framework version 1.11 for Windows 7 for x64-based Systems (KB2685811)

Installation date: ‎25/‎03/‎2013 7:40 PM

Installation status: Failed

Error details: Code 8007007E

Update type: Recommended

Install this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.2685811

A:Windows update failure error code 8007007e

SFC /SCANNOW Command - System File Checker option two. Any integrity errors?
Open the Windows Update troubleshooter

What is the System Update Readiness Tool?
Post file %SYSTEMROOT%\Logs\CBS\CheckSUR.log afterwards

Read other 8 answers
RELEVANCY SCORE 79.2

Hello,
I have been having some trouble with Windows update recently. My CheckSUR.log file says I'm missing 146 CSI Payload Files

I've attached both CBS and CheckSUR log files. Thanks for any help offered!

A:Windows update failure - error code 80073712

Here's the summary from your CheckSUR.log file...

Code:
Summary:
Seconds executed: 889
Found 146 errors
CSI Payload File Missing Total count: 146
This tome indicates that something serious interfered at the crucial time of an update install where the files were being relocated after a reboot - especially as SFC appears to find nothing amiss.

I'll post a fix protocol for the above errors later - but I wouldn't hold out too much hope of its being effective.

Read other 9 answers
RELEVANCY SCORE 79.2

I've exhausted my ability to try to solve this one on my own. I've run all of the automated fixes I can find from Microsoft, so I'm asking for some more targeted help.

I'm running Windows 7 Pro x64 SP1. I have run the System Update Readiness Tool (May '14). It completes successfully, but I don't know what it actually accomplishes because it doesn't make things better as far as I can tell.

Here is my windows update screenshot:
Attachment 330898

Here is what I see when I try to run SFC:
Attachment 330899

Here's my CBS zip file:
Attachment 330900

Thanks in advance for the help. Let me know if there is more info you guys need from me.

A:Windows Update Failure, Error Code 80070002

Hi, Welcome to SF.

Try this,

Windows Update error 80070002 - Windows Help

Read other 9 answers
RELEVANCY SCORE 79.2

I recently switched back to a pc after owning a mac for a couple years and I noticed after 3 weeks of owning it that it had never asked me to install any updates, so i went into windows update and it says it has never been updated. So i click search for updates and it gives me Errors found:Code 800F0900. I have used a registry cleaner (CCleaner), ive installed the system update readiness tool (Feb. 2013 x64), and I've run the microsoft fix it tool. absolutely nothing works. any help is appreciated!
specs are:
Alienware M14X R2
Intel i7 3630QM
NVIDIA 650M 2GB GDDR5
16GB memory
750 HDD+ 32GB SSD (the OS is installed on the HDD)

A:ERROR CODE 800F0900 windows update failure

Hi
 
Are you getting that error for every updates or when installing a specific update ? . Before trying any repair attempts,  uninstall your antivirus software and see if it helps. You can re install it later. 
 
If that didn't solve the issue, please follow the below steps.
 
1 ) Make sure Date, time and region settings are correct.
 
     Make sure your WIndows 7 is SP1 installed. If not download and run the SP1 offline setup.
 
2 )If all areOK download 'Windows Repair ALL in One' from  http://www.tweaking.com/content/page/windows_repair_all_in_one.html
 
3) Install and open the tool. Click next to continue. Go to Step 3 and click on the Do it button to run System File Check.
  
 
4 ) Go to Step 4 and click on the Create button under System Restore.
 

 
5 ) Go to Start Repairs and click on the Start button.
 

 
6 ) If it asks permission to backup registry, allow it to do so. Now you will see the main screen.
 
 
 
Click 'Unselect All' to remove default selection. Now select the following items.
 
 Register system files
 Set Windows services to default start up
 Repair windows Update
 Repair Windows Firewall
 
Now click the start button and repair will start. It may take sometime to finish. If it asks for permission to restart, allow it to d... Read more

Read other 16 answers
RELEVANCY SCORE 78.8

I can not for the life of me get SP1 to install. It always gives me the 80070002 error.

I've done what the microsoft help says to do which is clear out my updates list after stopping windows update in services then starting them again but it just produces the same error code.

I've run the system update readiness tool as well as a sfc /scannow and heres the CBS zip, a zip containing all the cbspersists(so I get them both uploaded under the limit) and a screenshot of the error.

This is starting to affect my ability to play newer games giving me 3B bluescreen errors and the like.

Thank you so much in advance for any help you can provide me! -Tera

Attachment 333648

Attachment 333646

Attachment 333647

A:Windows 7 SP1 failure to install, error code 80070002

Consider following the steps mentioned in the below MSFT Knowledge Base article:

Error 0x800B0100 when you try to install Windows Updates or Microsoft Updates

Navigate to the solution available for Windows 7.

Let us know if it helps you.

Read other 4 answers
RELEVANCY SCORE 78.4

New here and need help,
Windows Update KB2937610 failure; error code 800B0100
No idea what went wrong, check sur gives

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 25.0
2014-09-30 13:13

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_1_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_1_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_8_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_8_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB2937610_SP1~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB2937610_SP1~31bf3856ad364e35~x86~~6.1.1.3.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.cat

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Secon... Read more

A:A new Windows Update KB2937610 failure; error code 800B0100

You can try this page?
Windows Update error 800B0100 - Windows Help

Read other 5 answers
RELEVANCY SCORE 78.4

Hi

I'm using Win 7 x64
I've got a problem with KB2937610 for over a month.
I've tried to install it manually, use MSFixit and install it from clean boot. Neither worked.
Recently I found this forum, so here I am to ask for help.
(I'm sorry if I made any grammar mistakes, my English isn't prefect).

A:Windows Update KB2937610 failure; error code 800B0100

You have some missing OS files as well - but here's the summary from the CheckSUR log...

Code:
Unavailable repair files:
servicing\packages\Package_1_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_2_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_for_KB2937610_SP1~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_1_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.cat
servicing\packages\Package_2_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.cat
servicing\packages\Package_for_KB2937610_SP1~31bf3856ad364e35~amd64~~6.1.1.3.cat
servicing\packages\Package_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.cat
I'll post a fix protocol when I can get to it - probably tomorrow.

Then we'll need to fix the other errors.

Code:
Checking Component Store
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.17514_pl-pl_fab1504c7d13b602
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.18156_pl-pl_fab5265a7d104a83
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.22326_pl-pl_e3e47e9896ba5ed5
(amongst other possible ones - more later)

Read other 7 answers
RELEVANCY SCORE 77.6

Hi, Greetinds!

My OS is Windows 7 x64. Since March 2014 I updated my Windows 7 Home Premium to Windows 7 Professional online, except to the Security Update for the below followings failed to installed (Error Code 80000FFFF):

Internet Explorer 11,
Microsoft.NET Framework 3.5.1,
KB2862330, KB2862973, 2912390, 2916036, 2929961, 2930275, 2483630, 2913431, 2918077, 2919469, 2923545, 2929733, 2929755.

I had ran the followings fix:
Microsoft Fix it 50202,
Hotfix for Windows (KB947821) &

sfc /scannow, then follow by

1. Manually reset Windows Update components (How do I reset Windows Update components?), the following commands at a command prompt results shown:

The module " for the 4 following " was loaded but the entry-point DllRegisterServer was not found
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe qmgr.dll

The mould " for the 9 following " failed to load
regsvr32.exe msxml.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe initpki.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wuweb.dll
regsvr32.exe muweb.dll

2. MicrosoftWindowsUpdateAutoDiagnostic (Problem Found: Check for missing or corrupt files - Detected & Problem installing recent updates - Not fixed)

With the above solutions but the problem is still persisted. I Need someone help?

At... Read more

A:Windows 7 Professional Security Update failure (Error Code 80000ffff)

.NET 3.5 is part ofWindows 7 - so we can't use the usual trick of uninstalling/cleaning it out.

There are a mass of what appear to be simple download failures in the update log file - but nothing informative in the CBS.log file
These failures relate to updates as early as KB2862973.

Please run the CheckSUR tool, and post the CheckSUR.log file


Please download and save the CheckSUR tool from http://support.microsoft.com/kb/947821
(you'll need to look in the details for Windows 7, downloading from the Microsoft Download Center)

Run it - The tool can take anywhere from 5 mins to a couple of hours to run (or 'Install') depending on how much it has to do, and may exit silently - it may appear to freeze for most of that time, but be patient.
The result is logged in the C:\Windows\Logs\CBS\CheckSUR.log file - and an archive …\checksur.persist.log file

Then zip the CheckSUR.log and upload it to your reply.

Read other 8 answers
RELEVANCY SCORE 77.6

Been trying since 9/21 to install these two updates. I have tried the solutions suggested at Microsoft Community to no avail. I was able to install a Win Defender update today, but not these two. Anyone else having this problem? Any ideas to fix the problem? Thanks.

A:Windows Update (KB2744842, KB2732059) Failure, Error Code 80070643

Welcome to the Seven Forums.

While I understand that you "have tried the solutions suggested at Microsoft Community to no avail", I have no way of knowing what suggestions those are, so I fear that I'll be repeating suggestions.

Have you run the automated tool from here:
How do I reset Windows Update components?

Read other 6 answers
RELEVANCY SCORE 76.4

I have had numerous updates fail and I have no idea why, i've done a few methods such as using FixIt, sfc /scannow and checksur and nothing has worked so far, i'm running windows 7 64 bit,

thanks in advance!

A:Updates failed error code 80070308

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

Read other 1 answers
RELEVANCY SCORE 76

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

A:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

Read other 9 answers
RELEVANCY SCORE 74

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

Read other 1 answers
RELEVANCY SCORE 73.6

Dear Sevenforums,

I just installed a new HDD by WD into a HP DV7T (2008), everything has been going well up until I tried to Update Windows. I did not retain anything from the previous installation as the previous hard drive up and quit on me!

I activated windows and had it confirmed as genuine.

I followed the instructions posted on another page and tried to install SURT and got an error: 0xc8000247.

I was hoping for some suggestions, Direct X , Java, MSE and Mechwarrior Online wouldn't install.

Perhaps a driver issue?

Have a great day all!

Sincerely,
Noodle123

A:New HDD, Windows will not update, cannot install SURT error code below

This error is due to problems with the hard drive drivers.
First, open Device Manager, and click on View > Show hidden devices

Are any devices showing with yellow triangles or red crosses?
If so, Uninstall them, then reboot and see if that cures the problem.

if not...

This may simply be caused by a bad set of Intel Rapid Storage Technology drivers -

Installing the Intel Rapid Storage Drivers
try downloading and installing them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

(you want the iata_enu.exe download)

Once complete, please reboot twice, then post another MGADiag report.

Read other 4 answers
RELEVANCY SCORE 73.2

Hi guys,

Since I migrated my system on a new ssd a few months ago (using Paragon Migrate), I can't update my Windows 7.
Everytime I try to install them, it fails :
http://i.imgur.com/UNs7jns.png (in french but you don't need any translation to get that 21 updates failed)
And everytime I turn my computer off, it tries to install the updates while it's being turned off, and everytime it fails.

While it doesn't stop me to use the computer, I'm starting to be a bit worried.

I tried a few weeks ago to use the really big file you ask to download and left it running for like 30 minutes and as it freezed I killed it. As you say it would be expected, I am currently running it another time (it's blocked on KB947821 update for 10 minutes now).
I have also done the sfc /scannow command and it found no violations (as it says).

So a bit of help would be great. Here's my logs/CBS directory archive : Zippyshare.com
Hit me up if you need it on another hosting service.

Obviously, my windows copy is authentic.

EDIT : The big file thing just finished. I'm restarting the updates.
EDIT 2 : One worked, Silverlight, but others didn't and same error code.

A:Can't update, error 80070308

Some help please folks ? I think I did everything that was asked in the sticky thread.

I also followed this : Windows Update Error 80246008 in Windows 7 - Fix[3]=Windows%20Updates

Read other 9 answers
RELEVANCY SCORE 72.8

Hi

I am having problems installing the update kb4041681.  Everytime I turn on my computer the update tries to install but always fails.  The error code I am getting is 80004005.
I would appreciate any assistance as shutdown and reboot times are Looooooooong!
Thanks
Will

Read other answers
RELEVANCY SCORE 72.8

Hi all,
I am trying to install Service Pack 1 (KB976932) on a freshly installed Lenovo notebook with Windows 7 Home Premium 32 Bit. After running many suggested solutions from the update workflow itself the update readiness tool reported some corrupt files:
- Deleting Windows Update cache
- Running WindowsUpdateDiagnostic
- Running sfc /scannow
- Running Update Readiness Tool Windows6.1-KB947821-v33-x86

--> I might have corrupted files according to the log file but could not find reliable download locations:

CheckSUR results:
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 25.0
2014-10-23 14:08

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.cat

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Seconds executed: 469
Found 2 errors
CBS MUM Corrupt Total count: 1
CBS Catalog Corrupt Total count: 1

Unavailable repair files:
servicing\packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.mum
servicing\packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.mum
servicing\packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.cat
servicing\packages\Package_2_... Read more

A:Windows 7 32Bit Update Error Code 800B0100 for SP1 install

Extracted the corrupted files from the downloaded KB file Windows6.1-KB2545698-x86 with expand -F:*.* Windows6.1-KB2545698-x86.msu and then expand -F:* Windows6.1-KB2545698-x86.cab and then copied them to the folder C:\Windows\servicing\Packages

Read other 2 answers
RELEVANCY SCORE 72.8

Hi all,

I am having a problem installing the above update. It will download to 11% and then instantly fails, never getting to the Installation phase. I have no problems downloading or installing any other updates.

I have run the System Readiness Tool

sfc/scannow reports some corrupted system files that it cannot fix

I've restarted several times with no change

I have not been able to attach the CBS log as when I try to upload it I get an error.

A:Cannot install Windows Update KB2972211 - Error Code 80073712

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 9 answers
RELEVANCY SCORE 72.8

Hi,
Have failed update kb4041681 with error code 80242016 on Win7x64. I am unable to remove the failed update, and on re-try to download updates after reboot, kb4041681 does not get listed.

Read other answers
RELEVANCY SCORE 72.8

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.

But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got
the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)

Any help would be appreciated!

A:Windows 8 fails to install EVERY update, error code 0x800f0922

Hi Septura,
After checking the log you provided, I find two error messages.
1. failed to set task enabled status., error = 0x80071A91
2. WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
Please use the following command to fix your issue.
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
Note: Replace the C:\RepairSource\Windows placeholder with the location of your repair source.
Best regards,
Fangzhou CHEN

Read other 8 answers
RELEVANCY SCORE 72.4

Hi folks,

I have a HP Elitebook Folio 9470p.  It came with Windows 8, and I installed it on my corporate domain.  I was trying to do some Windows updates so  I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them.  It has about 18 updates it needs from security updates to a .net framework update.  I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do.  It gives this error in the event log for each file, Event ID 20.

Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).

This is the example for KB2862152, but it gives the same error for every one.  I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail.  Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?

Thanks for any help!

Read other answers
RELEVANCY SCORE 72

I am working on a client's laptop, and have been unable to update to Service Pack 1. Stand-alone manual installer results in error 0x800f081e

I have also run the System Update Readiness Tool, and this is the most recent log:

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2016-12-23 17:24

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages
(f) CBS Registry Error 0x80070002 Package_for_KB2695962_SP1~31bf3856ad364e35~amd64~~6.1.1.0 failed to get Visibility

Checking Component Store

Summary:
Seconds executed: 531
Found 1 errors
CBS Registry Error Total count: 1

Read other answers
RELEVANCY SCORE 72

I'm trying to install Windows Vista update KB948465 (Windows Vista Service Pack 2) but it keeps showing error code 80070490. According to my update history, update KB948465 has failed to install a total of 29 times since I first tried it on September 11, 2009 up to today, November 14, 2009. HELP!

Read other answers
RELEVANCY SCORE 72

Hi there,

I'm having an issue with a laptop running Windows 7 Home x64 SP1. It has failed to install Windows Update Agent 7.6.7600.320 and keeps trying every time I try to run updates.

I've downloaded the installer and tried to run it manually, but that gives me the error 0x80070002

I've attached my CBS log from the last time I attempted the install. Any help will be much appreciated!

A:Windows Update Agent install fails, Error Code 800F081F

The v320 update installer isn't commonly available (unless you know where to look) - where did you attempt to download it from?

Here's the error-sequence from your log...

Code:
2014-09-10 23:15:06, Info CBS Exec: Staging Package: WUClient-SelfUpdate-Core-UIComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.256, Update: UI, PinDeployment: amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.256_pt-pt_76bae7f7dbc23d63
2014-09-10 23:15:06, Info CBS Calling client to resolve source, cannot find file 'wuaueng.dll.mui' at path: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui
2014-09-10 23:15:06, Error CBS Exec: Failed to pre-stage package: WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.320, file: wuaueng.dll.mui, source: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all missing files for package: WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10... Read more

Read other 4 answers
RELEVANCY SCORE 72

KB2909921
KB2912390
KB2916036
KB2908816
KB2913270
KB2919907
KB2922300
KB2923768

Above updates wont install,, tried almost everything, clean boot, etc. I'm running Windows 8.1 64
Please Help
Thanks
Michael

A:8 Windows Update wont install Error Details: Code 800F0922

Originally Posted by koymik


KB2909921
KB2912390
KB2916036
KB2908816
KB2913270
KB2919907
KB2922300
KB2923768

Above updates wont install,, tried almost everything, clean boot, etc. I'm running Windows 8.1 64
Please Help
Thanks
Michael



Hi Michael:

Did you try to install the update again manually?
There are some errors that are simply a matter of bad timing, and they can be caused by busy websites and slow Internet connections, or a number of other factors. Sometimes you can fix these problems by trying to install the updates again.
1. Open Windows Update by swiping in from the right edge of the screen (or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), tapping or clicking Settings, tapping or clicking Change PC settings, and then tapping or clicking Update and recovery.
2. Tap or click Check now, and then wait while Windows looks for the latest updates for your PC.
3. If updates are found, tap or click Install updates.

Read other 5 answers
RELEVANCY SCORE 71.2

Hi
i can't update IE on several machines (some desktop pc's, some notebooks. different images, but all Win7SP1, 64bit) the IE 10 or IE 11 from IE 9.
we dont have internet on our production LAN, so i want to update via internal WSUS..like other pc's and notebooks in our LAN worked with success.
then i tried with offline installer...also both...IE 10 and IE 11, same failure.
i tried many things:
- uninstall products via FORFILES /P Command and install IE afterwards
- uninstall preReq Updates and install again
- install via Online-Update (Internet)
all done with real PC or a virtuell PC-Image, so i could try the things from begin on new checkpoint.
Done with Local Administrator and Domain-Administrator
i dont know what to do anymore.....
Last thing i tried: reboot - Run KB947821 - reboot - run again, took about 2 hours - reboot - try to run IE install with WSUS

Thanks for help

A:IE 10 or 11 Update Failure with Error Code 9C59

so sad...i hoped somebody had a bit time for my problem...i really dont know how to solve this...

Read other 2 answers
RELEVANCY SCORE 70.8

First post, thanks in advance for any help.

Problem:

IE 10 update fails to install.

What I've done so far:

Updated all drivers for everything under device manager
Windows fixit program to no avail
Ran selective startup thru msconfig and attempted install to no avail
Installed SURT
Ran sfc /scannow

CBS.zip file attached, I think that's everything from the post instructions.

Thanks again!

A:IE 10 install failure - Error code 9C57

Hello and welcome johnss I saw the previous post back in March where the OP had to do a clean install again.

But I guess that isn't an option for you so is it just an update for the IE10 or the IE10 itself?

Read other 9 answers