Over 1 million tech questions and answers.

blue screen error on undocking sony vaio from docking station

Q: blue screen error on undocking sony vaio from docking station

wen undocking my vaio notebook from docking station, I the screen crashes, shows blue with error message about bios updates-cannot finish reading as computer starts to reboot itself. Have installed bios update thru sony. Their solution was to wipe hard drive clean-that would be very involved. How can I find which software or program created this problem and remove it? Help!!!!!!

RELEVANCY SCORE 200
Preferred Solution: blue screen error on undocking sony vaio from docking station

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: blue screen error on undocking sony vaio from docking station

Disable the reboot and post the error message.
http://www.winvistatips.com/disable-...estart-a84.php

Read other 2 answers
RELEVANCY SCORE 91.2

Alongside with an HP ZBook 15 G3 I got an HP ZBook Thunderbolt 3 docking station (P/N: 841830-001, S/N: CND6440LJR).The problem is that when I connect the computer to it, after the windows login, I receive a blue screen with the error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. The computer restarts and as soon as it enters the Windows environment I receive again the same message.  How do I resolve this issue? Thanks in advance

Read other answers
RELEVANCY SCORE 84.4

Hi!
I have a Latitude E7740 that runs Ubuntu Xenial (16.04). I dock it to a "Dell EURO2 Advanced E-port II" docking station. 
If I boot it in the docking station, everything works fine, and I find all my two DVI-connected monitors. 
However, if I undock, then put it into the dock again while running, it fails to enable the screens. I'm using a script called autorandr for switching between display modes - it uses xrandr. It tries to run:
xrandr --output DP1-1 --gamma 1.0:1.0:1.0 --mode 1920x1200 --panning 0x0 --pos 0x0 --rate 59.95 --reflect normal --rotate normal --output DP1-2 --gamma 1.0:1.0:1.0 --mode 1920x1200 --panning 0x0 --pos 1920x0 --rate 59.95 --reflect normal --rotate normal
But the X server responds with:
X Error of failed request: BadMatch (invalid parameter attributes)  Major opcode of failed request: 140 (RANDR)  Minor opcode of failed request: 21 (RRSetCrtcConfig)  Serial number of failed request: 48  Current serial number in output stream: 48
Running this exact command after booting in the dock is doing the right thing, but after undocking then docking, it doesn't work.
Any ideas here? I have updated to the latest BIOS version.
Problem also reported in launchpad with lot's of debug info, here:
bugs.launchpad.net/.../1585884
Autorandr script is here: github.com/.../

Read other answers
RELEVANCY SCORE 83.6

Hello, it's my first time in this forum from recommendation of a friend, these past couple days I've been receiving this blue screen out of no where. I was wondering if you guys know the solutions for this.
 
Problem signature:
  Problem Event Name: BlueScreen
  OS Version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
 
The Blue Screen mentioned this error: 0x000000EA 
 
Additional information about the problem:
  BCCode: 100000ea
  BCP1: FFFFFA80041B8170
  BCP2: 0000000000000000
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS Version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
 
Files that help describe the problem:
  C:\Windows\Minidump\020615-46550-01.dmp
  C:\Users\Andy\AppData\Local\Temp\WER-92976-0.sysdata.xml
 
Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
 
If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt
 
The zip contains the "minidump" my friend recommend me to add for you guys to know more about the situation. 
Please let me know if you guys can find the solution. 

A:Blue Screen on Sony Vaio

Hello, and Welcome
 
Those dumps point to atikmdag.sys which is part of your graphics driver. Uninstall your graphics driver and install the latest version.
 
What is the model number of the Sony?
 
What is the graphics chipset used. RIght click Computer > Properties. Click Windows Experience Index link in the middle of the window. Click "View and Print Detailed Performance and System Informtion" Middle Right.

Read other 24 answers
RELEVANCY SCORE 82.8

I keep getting this screen almost daily. What should I do to fix that??

A:I have Sony Vaio Vpceh18fa. I always get a blue screen. what should ?

Hello . please post a dump file for the BSOD crew to see what is causing the bsod pls: Dump Files - Configure Windows to Create on BSOD[2]=Performance%20Maintenance

Read other 2 answers
RELEVANCY SCORE 82.8

Hello
I bought Sony Laptop VAIO laptop in Jan 2012. right after one week, i start getting Blue screen. i call Sony tech support and they said i can send the laptop and they will check.. but look like its a software issue... can some one pl. help before i send it back to Sony for repair.

Here is my Spec

Its Windows 7 home Premium, service pack 1, 64 bit.
- the original installed OS on the system?
- an OEM or full retail version? OEM

- What is the age of system (hardware)? 2 month
- What is the age of OS installation (have you re-installed the OS?) 2 month

A:Sony VAIO Laptop Blue Screen - Please Help

I see you have Norton.

Symantec is a frequent cause of BSOD's.
I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST

http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Read other 9 answers
RELEVANCY SCORE 82

Hey people,

got my dad's Sony VAIO and erm when i press the on button i get a blank blue screen no bios no vaio logo...zilch!

so i done various things including:

1. ATX Reset (Taking battery and ac adaptor off holding button for 30 secs and starting uo) = Fail
2. Reseating the RAM and ATX again = Fail
3. Reseating HDD = Fail (I just thought i'd do it but i knew it would do nothing lol)
4. Replacing RAM and ATX = 50% Fail
5. Clean fans with Duster just incase its overheating= fail

point 4 50% failed because I managed to get to BIOS into windows and you know tried to recover the computer (Factory Reset)...as soon as it restarted Blue Screen again and well it started a few times and then problem kept coming back and still does.

Any tips/tricks solutions maybe?

All help appreciated
Lots of love too all

Personally think its the MOBO or graphics card which are on their way out or already out lol
 

A:Sony VAIO Blank Blue Screen NOT BSOD - HELP!

What is the model # of the computer.
50% fail sounds like you have memory problems.
 

Read other 1 answers
RELEVANCY SCORE 81.2

win7- 64bit on Sony VPCEE31FX Vaio a couple years old.
using external Dell monitor successfully for a couple years.
Starting today, I get blackouts, about 2 seconds duration, maybe 2 per hour, and each time I get a Desktop Windows Manager alert in the Task Bar.
When I click View Problem Details, I get event: APPCRASH and Application Name: DWM.exe.

I did some searching and found a suggestion to run a SFC scan to check for any corrupted files. I did and it found no difficulties.

Today I also had two Blue-Screens come up. The messages stay up maybe 15 seconds, so I couldn't copy much. First one suggested running Memory Check, which I would do if I could find it. I searched my computer and found no Memory Check. I ran Windows Memory Diagnostic Tool and found no memory errors.

The second one said System Service Exception.

Not sure what to try next...........

-Chuck N.

A:Sony Vaio laptop screen-blackouts and blue-screens

Please download MiniToolBox , save it to your desktop and run it.Checkmark the following checkboxes: List last 10 Event Viewer log List Installed Programs List Users, Partitions and Memory size.Click Go and paste the content into your next post.Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 .Louis

Read other 39 answers
RELEVANCY SCORE 81.2

Hi folks, somebody recommended this forum to me as it helped them out! Here's hoping you might be able to do the same for me ...I have a 21 month old Sony Vaio (VGN- FE31H) and it went out of warranty on December 2nd 2007. Unfortunately it also seemed to 'die' a month later in January of this year, whilst I was 9 months pregnant with my first child... bah!Fast-forward to many months of online technical 'support' later....which has basically been a sham as they just keep on closing my queries and trying to SELL me the recovery discs that I feel should have been included with my initial purchase. I have done a little searching online and somebody with the same issue (or at least a very similar one) bought the recovery discs and they didn't actually work anyway.I cannot even access Windows or operate the computer in safe mode...the Sony Vaio logo appears then a BLUE SCREEN message:A problem has been detected and windows has been shut down in order to prevent any damage to your computer.Disable or uninstall any anti-virus, disc defragmentation or backup utilites. Check your hard drive configuration and check for updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your comp.0x00000024(0x001902fe, 0xf7cc780c, 0xf7cc7508, 0xf74711fc)ntfs sys - address 74711fc base at f7464000 datestamp 41107eeaI've tried to install a licensed copy of Windows belonging to my Brother and it just reached the actual installation bit ... Read more

A:Sony Vaio Blue Screen On Boot - Is My Computer Dead?

I am sure someone will be along with more ideas but to start you off,May one ask ; what antivirus program was on it and was it fully updated? Did you have Service Pack 2 installed??What kind of 'death did it apparently die?Did it suddenly play up or gradually and how?For what had the computer been used? When you press the F2 key what, if any, choices do you see and what happens if you attempt to select any of them?I guess you cannot even disable your Antivirus program?One wonders if it is infected or a hardware/software problem ( ps; Congratulations on your 'new arrival' I hope not too many sleepless nights for mum ? )

Read other 3 answers
RELEVANCY SCORE 80.4

Problem: My laptop crashes 8 times a day with a blue screen of death with the following message: A problem has been detected and Windows closed to prevent damage to your computer DRIVER_POWER_STATE_Failure
xxx STOP: 0x0000009F (0x00000003,0x87D2A030,0x82D22AF0,0x88A9FD30)

Details about my laptop are:


? OS - Windows 7
? x86 (32-bit)
? Age of system: 3 years
? Age of OS installation: 1 day (W7)
? CPU: Intell Core 2 Duo Processor T7200
? Video Card: Nvidea GeForce Go7600 with 256MB/Mo dedicated Video Memory
? MotherBoard: Sony Laptop Vaio VGN-AR21S
? Power Supply - brand & wattage: (Microsoft ACPI, Microsoft AC adapter, Microsoft Composite battery)


As requested by jcgriff2, I followed his instructions and added his requested information in a rar file (including performance monitor report and autoruns info).

please help me,
regards
skywalker2508

A:Blue Screen Of Death with DRIVER_POWER_STATE_ FAILURE on Sony Vaio with Windows 7

Here is the attachment of all collected info

Read other 4 answers
RELEVANCY SCORE 73.6

When I start my laptop or login to my laptop in docking station, the laptop screen often remains black. Appearantly it is sending the screen signal to the tv only. The tv is connected with an active 4k display port to hdmi adapter to the docking station. Windows key + p does not help. When taking the laptop out of the docking station, or, when disconnecting the display port plug from the docking station, there is no issue.Is there a way to set this up ensuring that the laptop always shows at least its own screen? I use the tv connection less often. I prefer not to have to plug in the display port for use. many thanks for your help!  

Read other answers
RELEVANCY SCORE 73.6

So, this is what happened:

1. A pendrive infected with virus was inserted (unknowingly)

2. Malwarebytes scanned and removed them. After removing asked me to restart, which I did.

3. I remember some system32 folder files were shown as infected but I dont remember exactly the names.

4. After reboot, I got vaio splash screen and then just a black screen. Nothing else!

What I have tried so far:

1. Tried the "unplug battery and power plug, then press the power button for a minute or two and then connect just the power plug (not battery) and boot" thing, didnt work.

2. Tried the assist button. But the first option named "start troubleshooting (recovery)" option restarts the laptop and again after the vaio splash screen, I get the black screen.

PS: The only way to get to see the 'boot into safe mode, network mode, etc" options is through that assist button. It doesnt work! I can however access the bios options.

3. Tried booting ubuntu live from a flash drive and it worked successfully. However, when I tried to open the windows paritions within the ubuntu live usb drive, it said they were "unclean drives"and failed to mount them.

4. So, I tried the Bitdefender rescue cd and scanned the whole system. It found 1 infected file (although it was more like a potentially unwanted program or something, not a malware or serious virus.)

5. Also, tried a windows 8 installation disk but it too would not boot. Tried a windows install... Read more

Read other answers
RELEVANCY SCORE 73.2

Hello,

I have had this problem with both the RC and the RTM builds of Windows 7 Ultimate x86 on two different Dell laptops--a Latitude D830 and a Latitude E6500. Both are running nvidia Quadro display adapters (the D830 is a Quadro NVS 140M and the E6500 is a Quadro NVS 160M). In the case of the D830 I am running the latest drivers from nvidia's site (Dell didn't post Win7-specific drivers for this laptop). For the E6500 Dell has posted Win7-compatible drivers on its support site for the NVS 160M so that is what I'm using there.

In any case here is the issue. I install Win7 on the laptop and install the video drivers... native rez on the laptops is 1900x1200 (WUXGA). Aero glass is enabled and all is well and good.

I then take the laptop and connect it to the Dell-specific docking station (the D/Port in the case of the D830 and the E/Port for the E6500). In both cases there is an external monitor connected via DVI that also has a 1900x1200 native rez. The laptop lid is closed and the laptop is in suspend/sleep mode when docking.

Once in the docking station I power the laptop back on (it resumes from sleep) and then it goes about detecting the presence of the dock and the attached peripherals. The welcome screen comes up on the external monitor and I type in my password to get back to the desktop.

The only problem is that aero is now disabled (the taskbar and window borders are now opaque and aero peek no longer works, etc.). I have looked all over the net and tried ... Read more

A:Aero turning itself off when docking/undocking

I am actually running into a very similar issue. If I try to use Aero Peek with two HD resolutions Aero Peek will disable itself. If I do a monitor that is mirrored Aero Peek works fine. I also have a Dell Latitude E6500. Have you found a resolution to this issue?

Read other 3 answers
RELEVANCY SCORE 72.8

Hello,Like many people I have problems with my HP 2013 ultraslim docking station and DisplayPort connection.I connect my laptop elitebook 1041 g1 with a DisplayPort to a iiyama ProLite B2783QSU monitor. When plugged into the laptop, everything works properly, display port 1.2 and 2560x1440.By cons, on the docking station no image is displayed on the monitor : black screen. Every attempt I hear the sound of connection / disconnection of a new material, the screen on and off without turning on any image. Whether Display port 1.1 or 1.2 on the monitor.Everything is updated :- Firmware dock station: 2.27.000 Rev.A (March 31, 2015) - I had to go the DP 1.1 Monitor to get there.- BIOS laptop 01.33 Rev.A (6 November 2015).- Intel drivers Rev.W 4139 (8 April 2015).I have 2 identical screens and would like to connect them to the station ...Do you have an idea ?  

A:Black screen - Ultraslim docking station with 1040 g1 - dis...

Is there any solution yet? I have a similar problem.

Read other 1 answers
RELEVANCY SCORE 72.4

Anyone know of a solution for this? Almost every time I undock or re-dock my laptop after a meeting, something will be unresponsive, i.e. my Ethernet cable will fail to be detected or my wired keyboard becomes unresponsive. This is generally solved by a reboot (reseating the cable to the device that is failing has not generally worked), but I don't think this is necessary to solve the problem each time. I am still needing to look at things such as drivers (knowing that Windows 10 has its own method of fetching compatible drivers over HP Support Assistant or what's offered through the site). Specs: HP Zbook 15 G2Inten 6th gen I7 Processor16 GB RAMWindows 10 Professional 64-bit  Hardware attached to docking station:Wireless MouseWired KeyboardEthernet CableVGA cable to Samsung Syncmaster BX2431Power Cable

Read other answers
RELEVANCY SCORE 71.6

Hello -  My x220 does not lock into  Mini Docking Station Series 3 that I bough recently. The rubber pads on the battery seem to be preventing the laptop from being docked. (Not sure if I am doing something wrong instead.) Also I am trying to set up a multi monitor display ( Dell U2415). Will appreciate some inputs on how I should resolve both the issues or a link if that has been covered before .  

Read other answers
RELEVANCY SCORE 71.2

Hi, guys,I have next setup: Dell Inspiron 7567 laptop, Dell D3100 docking station and LG Flatron e2360 monitor. And I have a problem with it.The problem is related to video cards installed on the laptop. The laptop is equipped with Intel HD Graphics 630 and NVIDIA GeForce GTX 1050 Ti. And the problem is that laptop/docking station/whatever doesn't use NVIDIA card to display the picture on the second monitor. So, if I run game or movie on second monitor it's displayed using only Intel card. Problem doesn't appear if I connect everything directly into the laptop(I guess, it's a docking station problem). How to solve that problem?

Read other answers
RELEVANCY SCORE 71.2

I cant replicate the problem when the laptop is off of the Docking station, but today I have tried to wake up my laptop on the station and three times now it just sits on the splash screen.  I have not installed any new hardware, software, or updated anything from lenovo.   I'm not sure what is going on.  

Read other answers
RELEVANCY SCORE 70.8

Hi,
We are facings issues with HP 650 G1 laptop (with Windows 7 professional image), when undock the laptop from docking station laptop freezes/hangs. We are
able to simulate the issue only 3/10 times.
I have followed the link 'http://answers.microsoft.com/en-us/windows/wiki/windows_10-update/blue-screen-of-death-bsod/1939df35-283f-4830-a4dd-e95ee5d8669d'
and the output can be found at

'https://onedrive.live.com/redir?resid=971706F47FB1FB7C!65840&authkey=!AEtcd2u9k0fY-vU&ithint=folder%2cnfo'

All the troubleshooting steps that I have followed are also captured in the above link.
Currently we have more than 10 laptops with this issue.

Please help me further to solve this issue, your help is very much appreciated
Also see: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/hp-probook-650-g1-issues-sleephangblack-screen/fefd4cd8-0b30-44ee-bbb0-90a1837bb76f
Thanks,
Lokesh

Lokesh899

Read other answers
RELEVANCY SCORE 70.4

Hello,

Hoping this is posted in the right place, I'm having some trouble with my Sony VAIO laptop.
My laptop seems to be crashing when I switch the wireless card on.
I will switch it on then either the system will crash straight away or when I go to run a program, like Thunderbird, a blue screen saying the following (this is not the exact error I am getting, I haven't been able to get a picture of it)
Yesterday It also seemed to crash when the system is idle with the wireless card on.
The wireless card is inbuilt into the laptop, with a little switch on the front.
The laptop is a Sony VAIO PCG-TR5MP.

A little background: I bought the computer second hand as far as I know the error wasn't coming up before I had it, I did a system restore on the laptop to make sure anything bad was off it. I can't remember when the problem started but over the past few months it has done it a few times a month but recently it seems to be coming more frequently.

The technical information section from my error reads:
*** STOP: 0x0000000A (0x01000029, 0x00000002, 0x000000000, 0x804DA6DB)

I hope someone can help.
Thanks in advance
Max
-------------------------------------------------------------------

I've posted an HJT log below, not sure if it's relevant in this case.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 19:40:20, on 13/05/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16827)
Boot mode: Normal
... Read more

A:Solved: VAIO Laptop Blue screen error

Read other 8 answers
RELEVANCY SCORE 69.6

Used laptop that I received for christmas yesterday has now shut down three times with blue screen. After the first time, I installed Avast! and it found two malware files and two corrupted files in the boot scan. It has shut down twice since then, once in the middle of the scan. I am not sure what you will need to know, but here is what the error found message reads:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFDA800729B4B0
BCP2: 0000000000000001
BCP3: FFFFF80006C6E9EF
BCP4: 0000000000000007
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini122611-02.dmp
C:\Users\Owner\AppData\Local\Temp\WER-42494-0.sysdata.xml
C:\Users\Owner\AppData\Local\Temp\WER627.tmp.version.txt



If anyone can help, I would be beyond grateful. The laptop is amazing and runs so smoothly, blue screen aside. I would hate for my christmas present to be a dud.
 

A:Sony Vaio Blue Sreen

was it new or used? If new, I would take it back for a new one.
 

Read other 6 answers
RELEVANCY SCORE 69.6

I've had this computer for less than a month, and this already happens. Funny how the world works. I'm running Windows 7, 64 bit.

So I start Norton Anti-Virus for a full scan, and it gets about 3/4 of the way through before the laptop shuts down on its own. I figure maybe it finished earlier than I thought, so I attempt to boot up, and as it tries to start Windows, I get the wonderful blue screen.

Information on the blue screen reads:
"Stop 0x0000007B (0XFFFFF880009A97E8, 0xFFFFFFFFC000000D, 0x0000000000000000, 0x0000000000000000)"

When I attempt to do Statrup Repair, the information reads:
"Root Cause Found: Unknown Bugcheck: Bugcheck 109
Parameters= 0xa3a039d89ece68c8, 0xb3b7465ef14ca28a, 0xfffff80000bba5e0, 0x1)
Repair Action: System Files Integrity Check & Repair
Failed, Error Code= 0x490"

Windows 7 came preinstalled on the laptop, which means I have no reinstall disc
Please help!

A:Sony Vaio Blue Screening

Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

Read other 8 answers
RELEVANCY SCORE 69.6

I have a Sony Vio model PCG-3E2L. I tried installing xp on my sony computer that had vista on it. It continually blue screened during the very beginning of the install process. So, I decided to remove vista. I could not get vista to uninstall so I finally ran an older bootable windows like 98 or me which got me to dos. In dos I deleted and reset partitions. I did not format as format was not on the disk I used. Now, with a fresh hard drive I figured that xp would install but it won't. The computer boots by cd but again it continually blue screens at the beginning of the install process b/f it asks any questions but after loading drivers. Any help is truly appreciated as I'm about to loose my mind
 

A:XP Blue Screen Error When Installing on Sony Vio / PLEASE HELP ME

Let me guess, your laptop had Vista pre-installed?
You MUST reformat the drive if you want to install XP on an existing Vista installation; a FULL format is necessary.
 

Read other 3 answers
RELEVANCY SCORE 69.2

Does a docking station charge a laptop without the docking system itself being plugged in?

A:Does a docking station charge a laptop without the docking s...

Hi, What is your laptop ? Does it have docking port and use a PROPER docking station ?  If YES for both then yes, docking station will changer the battery on laptop, Normal USB port replicators (vendors also call them as docking startions) won't charge battery on laptop. Regards.

Read other 1 answers
RELEVANCY SCORE 68.8

Hi all

This computer keeps blue screening usually after around 30mins

Windows Vista Ultimate 32-bit SP2, 4GB, Core 2 Quad Q9400 @ 2.66Ghz

Here are the details:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: a
BCP1: BB1FFFF4
BCP2: 00000002
BCP3: 00000001
BCP4: 81EDEC87
OS Version: 6_0_6002
Service Pack: 2_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\Mini112812-01.dmp
C:\Users\Denis\AppData\Local\Temp\WER-76268-0.sysdata.xml
C:\Users\Denis\AppData\Local\Temp\WER3DAB.tmp.version.txt

Please find these files attached

Can't attach the .dmp file so here it is copied from Windbg

Microsoft ® Windows Debugger Version 6.2.9200.20512 X86
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [J:\Mini112812-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable... Read more

A:Sony Vaio VGC-RT1SU Blue Screening

Gathering background data:Please download MiniToolBox , save it to your desktop and run it.Checkmark the following checkboxes: List last 10 Event Viewer log List Installed Programs List Users, Partitions and Memory size.Click Go and paste the content into your next post.Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 .Louis

Read other 1 answers
RELEVANCY SCORE 68

I am working on Sony Vaio laptop that BSOD's right after starting up. I have run the FRST utility but cannot seem to determine what might be causing the crash. I have looked up the error code given at the BSOD, but cannot find that number specifically. Any help is greatly appreciated. I have attached the frst.txt file.

A:Sony Vaio Blue Screens seconds after startup

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===We Need to Diagnose Your Blue Screen (BSOD) 1. When you boot your machine, press F8 to list the startup options, exactly as you would if you were trying to enterSafe Mode 2. Select "Disable Automatic Restart on System Failure", as shown here:When your system BSODs, write down the STOP error code, as well as any written out error message back here. The STOP error will always appear, but the message may not. You are looking for this:A file name might be listed too. Please report this in your next post.===

Read other 2 answers
RELEVANCY SCORE 67.2

Ive been a comp tech for a few years now and this is the weirdest problem ive ever seen. First their hard drive died. After running DFT on the drive, i diagnosed it was the SMART controller. They Purchased a new WD. After I installed windows on the machine, I noticed strange blue lines appearing during BIOS and the Win XP splash screen. When I got into windows I noticed that the names for the login were faded looking. Once in windows it self, if you hit the start button all the icons look like they mesh together and dont display right unless I mouse over them. And in windows when I open IE, next to the cursor there are 3 vertial pink lines. Anyone got any clue on this one? The correct Drivers are installed and still getting the same problem.

Also, On this Sony Vaio they have a "recovery" parition on the orginal HD, but because the SMART is going dead I cant boot into Normal mode or "Setting that worked last" . Is there anyway I can pull it off and install that version of windows on here so i can get my spare copy and key back? I can access the files when the drive is the Slave but I dont want to fart around with the drive with it being on its last leg.

Sony PCV-RZ10C JIC anyone is wondering.

A:Sony Vaio and Random Blue Lines and other wonderful problems??

Found the problem with the lines. It seems that the video card (GeForce 4 ASUS) was going bad. Replaced it with my old Voodoo3 3000 and it runs like a champ. Having no more issues with funy graphics. New hard drive is now working fine. JIC anyone gets the same problem.

Still need to know if anyone knows how to get the partition off the drive with windows on the new HD, so i can get my key back. Thanks.
-TD

Read other 2 answers
RELEVANCY SCORE 67.2

Having an issue with all Dell 7510's and associated docks we've deployed to new users at my employer. The external keyboard won't work at the Bitlocker prompt. These PC's are imaged for Win10.
I've sifted through the BIOS settings and have had no luck getting it to work. One thread I found said to make sure the Post Behavior -> Fast Boot setting is set to Thorough. Verified that is the case.
Note: if I undock and dock the PC the external keyboard will work that 1st time at the bitlocker prompt, but at next reboot it doesn't work.

Read other answers
RELEVANCY SCORE 66.8

I have a Sony Vaio VGN-FZ18E which is experience some major problems at the moment.
Firstly, I get 'nvlddmkm' problem about every 10mins or thereabouts which causes the screen to lock, go fuzzy, blank the screen and then revive and become functional again.



This can eventually, or straight away, lead to a total fuzzy screen lock-up where I simply have to hit the off button to restart the computer.
This is also interspersed by various other screens such as those below; mixed pages, blue screen, which seem to have come from the Matrix.





The computer is about four years old and the front left of it can get very hot.
Is it just knackered?
Would a re-format and re-install do the trick?

Any ideas or solutions?

Cheers,
Tom.
 

A:Major Sony VAIO problems - graphically, freezes, blue screens etc

The Nvidia graphics chip on the motherboard is probably over heating. The CPU/GPU cooling port may be clogged with dust or the thermal pads or paste need to be cleaned and replaced
 

Read other 1 answers
RELEVANCY SCORE 65.6

Hi - Hopefully someone can help..

Screen keeps freezing (and sometimes black screen or laptop just shuts off), not sure if it would be considered a crash because the hard drive activity light will keep blinking. When it freezes the mouse doesn't move and I can't input anything in the keyboard (doesn't show on screen). I am still able to turn off the display with the "display off" button and the num lock/caps lock/scroll lock lights can still be turned on/off. I've tried restoring the hard drive and reinstalling the OS but I'm not able to get far due to the freezing problem. This is the third time this has happened. The two previous times I have been able to restore everything, but this time i cannot. During the restoration/reformatting process, the screen froze but I pressed enter when the hard drive stopped spinning and it was able to complete the reformatting and restart by itself. The freezing problem however, still exists. I would really appreciate it if someone could help me out!

I have the exact same problem as this guy ( http://forums.techguy.org/hardware/944465-solved-sony-vaio-screen-keeps.html ).. except my laptop is SONY VAIO VPCF1 .. I have reinstalled win7 (5times) and win8 (consumer preview once).. so its definately not software issue.. its hardware.. but I can't figure out what is wrong...

Any help would be much appreciated, thanks!

J.
 

A:Sony Vaio screen freezes.. black screen somtimes

Has the warranty run out ?

It seems to be overheating so try blowing out any dust at the fan outlet using a can of air, or use a straw or similar and blow through that.

Also try using it on a flat table or desk if you aren't already doing so.
 

Read other 3 answers
RELEVANCY SCORE 65.2

any one can help me about this problem please? my technitian told me that i have a problem in the chip nd it is not too worthit to try fix it.

see video please


thanks!

A:SONY VAIO SCREEN PROBLEM

get the graphics chip reballed by a tech with a rework station, its a issue with the gpu over heating and the lead free solder used.

Read other 5 answers
RELEVANCY SCORE 65.2

Edited to add Model: Vaio VGN-SR29XN
Hi,
My Sony Vaio is about 4 years old, running Windows Vista Business,and Office 2010. It usually lives on a side table, but when I want to use it I move it to the arm of the couch. Recently about 4 times, when I move it, the screen just freezes, and stays locked. Mouse won't move. Ctrl Alt Del doesn't work. When I force it off with the power button, and select "restart normally", it works fine.
I'm worried that some day it just won't restart.
I would appreciate some suggestions as to cause, and what I can do to prevent it freezing please ?
Thanks, Niall
 

A:Sony Vaio, Screen Freezing

Read other 8 answers
RELEVANCY SCORE 65.2

I have a Sony Vaio BX563-B. I have encountered a black screen; no matter what I seem to do, I cannot get it to light. It seems to be getting power (the fan runs, the CD drive spins, etc.) but regardless of whether on battery power or AC, I cannot get it to respond.

I have run the computer on battery until exhausted, allowed the machine to recharge, and still no result. Help?
 

A:Problems with Sony Vaio Screen

Either the backlight or inverter has failed. You need to replace one or the other, and there are only24 screws of four different sizes to remove and reinstall... but it is the screw covers that are the difficult part on a Sony.
 

Read other 1 answers
RELEVANCY SCORE 65.2

I have a Sony VAIO E series laptop with Windows 10 installed. Yesterday, while using the laptop, it hung and I waited for a while for it to get back to normal. When it didn't, I pressed the power off button and it shut down. When I restarted the laptop, the power LED lit up and after 20-30 seconds the fan started working as well. But the screen was blank. Just like when the laptop is turned off. I've tried every troubleshooting tips.
Could anyone please tell me what can be the issue ?? Is the motherboard dead ?
 

A:Sony VAIO blank screen.

it maybe the motherboard , graphics card, screen

Remove the power adapter
Remove the Battery
Now hold the on/off button , on, for 60 seconds

now put the power adapter back on (not the battery yet) - will it start up and work now

If so
Shutdown
put the battery in
and restart as normal
 

Read other 1 answers
RELEVANCY SCORE 65.2

Hello guys !!
I have Sony Vaio VPCF13M1E/H (VGP-BPS21) / (PCG-81212M) with broken screen (LQ164M1LD4C D SHARP 16.4 Full Hd). The price for this screen is ridiculous high and i I want to ask you - can i purchase WXGA++ (1600x900) HD+ instead of WUXGA (1920x1080) Full HD from this site http://www.laptopscreen.com/English/model/Sony/VAIO~VPC-F13M1E*H Will it work?
Thanks
 

Read other answers
RELEVANCY SCORE 65.2

Hi,
I have a five year old Sony Vaio laptop VGN fe28h. For a week or so I have been having problems when using the keyboard. At times it would create random letters/numbers when I typed. The Cap lock might come on for no reason. then numbers would randomly scroll. Then the problem would stop for a while. I did a virus check with AVG - all clear. I checked with for malware and used superantispyware - all clear. Now the situation is even worse. When I turn on I get a continuos beeping alarm and I can't get past the first Vaio black screen.

I had used Wisecare365 registry cleaner and Registry Fix in the past few weeks and realize now these programmes can do more harm than good. Could they have done this damage? The only other thing I did was uninstall Norton and installed AVG in its place some months ago.

I am not very computer literate so any advice would be appreciated. Is the computer just at the end of its lifespan? I had tried just before I got the black screen to go into System and System Restore but I didn't manage to get very far,

Thanks

A:Sony Vaio Black Screen

A friend of mine discovered that it is the keyboard itself that is the problem. He got past the black screen by holding down various keys. He then plugged in in an external keyboard. This helped initially, but the problems are still reoccurring. I rememeber now that I used an anti static cleaner on the keys a while ago. Stupidly, I sprayed directly onto the keys instead of onto a cloth first. This must have caused a short circuit of some kind.

Read other 3 answers
RELEVANCY SCORE 65.2

Hi folks, I really need some advice from computer experts here.

Last night I was on my laptop, listening to music, surfing the net etc then all of a sudden the screen just went black. Now I left this for 5 minutes to see what would happen after this I decided to shut down it by pressing down the on/off button. I left this for a few minutes to cool down then when I turned on the laptop the Sony Vaio sign showed up -all seemed fine then it went black again.

I done this another time and got some messages on the screen, acknowledging the laptop had not shut down properly. I then chose the option to enter the laptop in a 'safe mode' i think where all the icons were much larger and the laptop had all the essential programs on it. From here I chose to shut down the laptop properly so I went Start>Shut Down. I then left the laptop for a good 5 minutes then decided to see if it was ok. When the Sony Vaoi sign showed up, the graphics were all fuzzy, then the screen went black with yellow dotted lines running down the screen.

I then left the laptop overnight and switched it on this morning the message then came displaying the 'full System repair' option. So I chose, it displayed loading bars showing its progression etc. Then the screen went back to black with the yellow dotted lines runing down it?

Anyone know what happened? Can you help me? I really need my laptop for coursework at university right now.

My Laptop is the: Sony-Vaio-VGN-NR385

Read other answers
RELEVANCY SCORE 65.2

I just bought this used sony vaio from a legit computer store, I have had it 3 weeks and since ive had it ive been having trouble with the screen freezing. Looks pixilated and white. If i tilt the screen back it will un freeze for a few moments then do it all over again. I am not sure if it's the screen or a virus. I have run some free virus programs (i am a tech dumbie) and nothing helped. I do have a 6month warranty that only covers hardware. Does anyone know what the problem might be? The screen, a virus? the laptop its self? Any info would be greatly appreciated.
 

A:Sony vaio, trouble with screen. Plz help!

Sounds like a hardware fault. Moving the screen would have no effect on a software issue.

You've only had it three weeks, return it, have it repaired, or exchange it for another model.
 

Read other 1 answers
RELEVANCY SCORE 65.2

I'm working on a Sony Vaio vgc-v617g which has worked fine until just recently. It's one of those desktops with all the hardware built into the screen, like a mac. Now, when i boot it up it shows the vaio symbol for about 1 second, and then the screen goes blank. It does this once more with the windows welcome screen. Its visible for about one second, and goes blank. The computer is still doing work, even though the screen is blank. Is it the backlight? I dont know if its possible that a backlight will work for a second even though it's dead. Is it repairable?
 

A:Sony Vaio Screen Black

Hi,

I was wondering if you were ever able to solve this problem...

I have the same model desktop and am now having the EXACT same problem. Any suggestions would be incredibly helpful!
 

Read other 3 answers
RELEVANCY SCORE 65.2

Hi all - Someone gave me a Sony PCG-9E1L that has screen problems. I'm not sure if I need to replace the LCD - and if I do, I'm not sure what type of LCD to get.

When I first received this computer, things looked bad. The lower part of the monitor was obscured by flickering white horizontal bands. Those lines seem to have gone away (for now at least), but the entire monitor is very washed out (particularly in the lower portion). The lack of contrast makes it difficult to utilize some programs. Furthermore, objects (like the mouse) leave a temporary, ghost trail when in motion. What is the most likely problem here? Everything works fine on an external monitor.

I see that there are eBay sellers offering PCGs for parts or 14" PCG screens for $100-$175. That's more than I'd like to put into this old machine. Any suggestions? Can I buy a screen not explicitly labeled "PCG-9E1L"? If so, what type do I need?

Thanks for any assistance you can provide!
 

A:Sony VAIO Screen Washed Out

I read today that white lines typically indicate major problems (ie. not the lamp, cables, or inverter). Anyone have any advice???
 

Read other 1 answers
RELEVANCY SCORE 65.2

I replaced my sony vaio lcd screen because it was cracked. The backlight was working when it was cracked but when i put the new one on it didnt. if you hold a flashlight to the screen you can see it is working, but not the backlight. both the inverter and the screen are new so i dont have any idea what it could be. Could it be the lid switch? a fuse? or the plug that plugs into the lcd screen. if someone could help me out i would greatly appreciate it.
thanks
 

Read other answers
RELEVANCY SCORE 65.2

Where can I get a good deal on a replacement screen for my sony vaio PCG-CX1
 

A:Sony Vaio Pcg-cx1 Cracked Screen

is that a monitor?

Try here
http://www.ubid.com/actn/opn/getpage.asp?AuctionId=6420299

I bought one 1 1/2 months ago.. $99 plus shg
 

Read other 2 answers
RELEVANCY SCORE 65.2

I noticed two nites ago that there was a black spot in the lower left corner of my screen, where the "start" is. I touched it, and the thing was blazing hot in the whole lower left hand corner area!

My hubby took it down to my shop and blew it out with the air compresser.

It still got hot and had the black spot.

After one full day of that, I turned it on this morning and it has been okay.

The fan didn't seem to be running yesterday, but is this morning.

I don't really see how the fan would cool the outside of the screen, though, one way or the other.

Any thoughts?
 

A:Sony vaio frame of screen getting very hot

bump
 

Read other 1 answers
RELEVANCY SCORE 65.2

I have a Sony Vaio PCG 2A2M All in One from about 4 years ago. The screen has died on me and I can not see a way of attaching an external display.
Any ideas?
 

A:Sony Vaio All in One screen broken

There should be a second Sony model number on the computer, Sony likes to have two models for their systems and one of them is generally pretty useless.

Is there a VGA, DVI, or HDMI port on the computer? If not then you are out of luck unless you replace the screen. Are you sure its the screen and not something else?
 

Read other 1 answers
RELEVANCY SCORE 65.2

I have an AR51m and before i chuck it can any one advise as what the problem might be please.
I had problems with the screen going strange colours , flickering really bad and the text was not being displayed correctly so thought the screen had failed,even though after a few hours it would display correctly for a while ,replaced it and it was even worse the images were really bad so had it replaced again as i thought it was faulty,installed new screen and its the same.Does not flicker now or change to strange colours but text and images are not right.Plugged in to external monitor it is OK heres a pic taken with camera ment to be my cat lol

A:Sony Vaio Screen Display

I might be misunderstanding something so I apologize in advance. The cat image is being displayed in Windows Photo Viewer and obviously the image isn't displaying correctly. The screen behind the cat is (I'm guessing) your Pictures library. It seems to be displaying OK. So in this one particular instance it's possible that Windows Photo Viewer might be damaged or corrupted in some way. Since Photo Viewer is a part of the Windows operating system, a System File Checker scan may be able to fix damaged or corrupt files. If SFC finds any problems, run the scan 3 times rebooting in between each scan.

SFC /SCANNOW Command - System File Checker

Another possibility might be a damaged or corrupt driver. You could open Device Manager to see if there are any problems listed, particularly for the Vaio monitor, display adapters, and system devices.

Open Device Manager

Please post back to let us know if you find anything.

Read other 1 answers