Over 1 million tech questions and answers.

14" Laptop LCD with thin blue line?

Q: 14" Laptop LCD with thin blue line?

I have an HP Pavilion N5425 laptop, 14.1" LCD TFT (Toshiba) that works fine but 1 complaint:

About 1/4 way across the screen (from left to right) there is a thin blue line running from top to bottom.

It started very faintly but grew continually worse and is now a "permanent" feature.

The screen and laptop are fine otherwise, and I've been able to check all internal connections and and component seating. But the this hasn't corrected the problem.

I can replace any peice, but what part is it? Screen? Cable? Video Card?

When I change resolutions, the line stays in the exact same place on the screen.

When I unplug the cable from back of the screen (leaving the invertor connected) the screen remains on and show a plain white field with no blue line.

Using the video-out from the laptop, the line does not appear when hooked to a TVs video-in. (I do not have a proper monitor to try this with.)

Gently moving the cable seems to have no effect. But there is a good length of it held still under the power-button pcb when the laptop is re-assembled enough to turn it on.

Anyone have any experience like this and have an idea as to which part to replace? Any more suggestions to try?

Thanks!

RELEVANCY SCORE 200
Preferred Solution: 14" Laptop LCD with thin blue line?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: 14" Laptop LCD with thin blue line?

take it to a laptop repair shop or get a good technician on the job because it'll take tools and training to fix the problem (laptops are very tricky to mess with).

Read other 3 answers
RELEVANCY SCORE 92

Today I turned on my laptop and there is a blue line running vertically down the left side of the screen that I can not seem to get rid of .  I updated my video drivers and restarted the system but its still there. the lapptop is a week under a year old. HP ZBook 15 G2 Windows 7 NVIDIA Quadro K2100 M.  I never dropped the laptop or anything even rouch to it. I am very careful.  Please let me know what i can do. Thank you 

A:thin blue line on laptop screen

Hi Kerberg, Can you try the following troubleshooting steps to see if it's hardware/software issue: - Connect the notebook to an external monitor to see if the line appears on the external monitor. - Go into BIOS by tapping "F10" key during boot up and see if the line appears on your main display. If it doesn't occur in BIOS, the hardware is good. We will have to focus on video drivers- onboard and discrete card. If the line appears on the screen, please call 800-334-5144, say notebook and then zbook through the promot. Thank you, -Tenzin




I am an HP employee.Make it easier for other people to find solutions, by marking my answer ?Accept as Solution? if it solves your problem.***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***#hpexpertday

Read other 1 answers
RELEVANCY SCORE 88.4

Any ideas on what could cause a thin blue vertical line on side of screen? Any ideas on how to get rid of it?  I have  a Dell Inspiron 2200 Laptop.  New to forum, thanks for any help on this!

A:Thin Blue Vertical Line on Screen on Laptop Dell Inspiron 2200

I have the same laptop and have a thin green horizontal line on my screen.  Hope you get an answer here that will help me too.

Read other 2 answers
RELEVANCY SCORE 77.6

For whatever reason, this morning I have a thin blue vertical line down the right side of my desk top monitor. I purchased a new HP with Windows 7 in December of this year. The Samsung digital monitor is only 7 months old. I tried (foolishly) to tap the screen and the blue became yellow.

Wierd.

Any ideas?

A:Thin blue/yellow line on monitor

an artifact left over from a sidebar? did you try to refresh the screen?

Read other 1 answers
RELEVANCY SCORE 72.8

Hi please help me my laptop(HP630) is showing a thin red vertical line on the left side of the screen and it also appears on Bios screen. I have switched it off and on but it still shows the thin line it's really annoying, please help how to fix it. I have no warranty now my laptop has been with me for 6 years. I would appreciate a step to step guide on how to fix it myself.please help?

Read other answers
RELEVANCY SCORE 72.8

a thin white vertical line on my laptop display ... a single vertical white line

Read other answers
RELEVANCY SCORE 72.8

 Hi,I am noticing a strange issue with my recently bought laptop . Attaching some pictures for more details. To me it seems some kind of gap or break in the LCD display.I hope this can be worked out as it is still under a month when I bought it. Please suggest.?  ?  ThanksAD

A:Thin vertical line on my newly bought laptop

It could possibly be due to a faulty data cable and at worst the screen itself. Only solution would be to have it serviced by a Lenovo technician as it is most likely hardware related. 

Read other 1 answers
RELEVANCY SCORE 65.2

Random Blue Thin/Dotted Lines on My HP Laptop Screen

I was recently transfering files to my new laptop, and uninstalling programs on my old laptop when I suddenly got thin blue lines randomly on my old screen in dark or black areas (see images). It is not in the same location on the screen depending on what I am viewing.

I hooked an external monitor to my laptop and the image is perfect. Another odd thing is when I screen capture the bluelines and view the image file on another PC, they do not show.

Any ideas?

Thanks!
 

A:Random Blue Thin/Dotted Lines on My HP Laptop Screen

Read other 6 answers
RELEVANCY SCORE 60.8

I have a Dell Inspirion 9200 Laptop with Windows XP, recently I have noticed a thin white vertical line that runs on the left side, top to bottom. Every once in a while there is one that shows up in the middle, but it disappears once it has finished uploading. Is there anyway I can check to see what may be causing it?
 

Read other answers
RELEVANCY SCORE 60

I just got a brand new Dell Inspiron 15 7000 Gaming laptop and not even one day later, a thin squiggly vertical black line appeared on the right side of my screen! I had done absolutely nothing to damage the laptop. I have the latest drivers and everything. Is there any way of fixing this or am I going to have to exchange it for a new one?

A:Thin squiggly vertical line! Help please

Hi fredamdo,Thanks for posting.Apologies your computer is not working as you expected.  Please perform a diagnostics test by either using Dell Support Assist, or by pressing F12 at startup. Make a note of any error messages, and give Tech Support a call for additional troubleshooting and possible resolution.  You can contact Tech Support at 1-800-624-9896 or 1-800-288-4410, or you can initiate a chat session http://dell.to/2v4snVm

Read other 1 answers
RELEVANCY SCORE 60

I booted up my laptop today and I got a thin white line going across the screen... Would that be a screen problem or would be do to an OS problem? I shut it down and rebooted and I still got it...

Please advise!

Thanks...
 

Read other answers
RELEVANCY SCORE 59.2

I have a thin vertical green line that is going down my screen. It disappeared when I rebooted and went away for a short while. Now it is back. What can I do.

TOSHIBA Satellite L305-S5933
http://www.toshibadirect.com/td/b2c/retail-product.jsp?poid=431111
 

A:Thin vertical Green Line on my screen

Read other 9 answers
RELEVANCY SCORE 59.2

frist of all this problem is not the monitor, i will list everything i have done
this only appears when i play a dvd , it does not appear with all other software which i believe makes it a power dvd software problem?
1.Tried a different lcd monitor still there
2. tried uninstll and reinstall the software power dvd 9.0/no change
3. i thought about the vga cable but its fine with other software

I run windows 7 x64/955 AMD cpu/With 6 GB ddr3 memoery/asus M4a78E_t mobo
I also unstalled my windows 7 shark codecs software and reinstalled it no change. since it is exactly in the center i thought maybe some driver is causing this problem i have searched for a new driver using windows, it says i have the right driver for the ati 3300 internal video.
HELP
 

A:thin red line verticle in the center of the monitor

sounds correct the software or driver with that software

have you tried a different software for playing DVDs .- for example windows media player
 

Read other 3 answers
RELEVANCY SCORE 59.2

I bought my XPS 13 9360 during black friday and just opened it up for Christmas. Immediately during the first start up I noticed a persistent thin green vertical line in the middle of the display.
I hooked up an external monitor and i've confirmed that it is only on the laptop screen. Is this a common problem and is this something that Dell can resolve immediately with  replacement or is this something that will have to be sent in for repairs?

Thanks

Read other answers
RELEVANCY SCORE 59.2

I was writing in microsoft word, i closed word, and then all of a sudden i see a very thin purple line appear on my desktop. Its not just the desktop, because the line appears in word, it appears in firefox, so its obviously something my monitor is displaying. I have a dell i9300 with a 17" WUXGA. What is going on, and how can i fix this?
 

A:My Monitor now displays a thin puple line?!?!?

Read other 14 answers
RELEVANCY SCORE 59.2

Hi guys 
Having issue with my Dell XPS 9530  15 inch
two thin horizontal lines appear through all dispay. they exactly divided display onto three equal parts.
those line visible only on dark solid color filling screen. External display is ok. Bios tests same result observable on dark , not visible on light. Looks like a problem with back lite. No falldowns, no drops labtop was moved only inside my apartment from one table to another,
Most inteesting it exactly same issue appearing second time. First 6-8 month after purchase. was replaced display under warranty. and now after -9 month after replacement EXACTLY same issue. 
Anybody have something similar? looks very possible engineering defect. And dell support offering me fix on my cost.

Thanks
Kostyantyn

A:Two thin bright horizontal line through all screen

Hi,
Thank you writing to us!
Can you private message the picture of the screen with the lines mentioned.We would like to know if the lines appear in BIOS.
Kindly private message the service tag and email address.
Thanks
Robin

Read other 1 answers
RELEVANCY SCORE 59.2

While viewing Netflix and YouTube there is a thin red vertical line running through the center of my screen. HP support claims its an issue with Netflix. Netflix support claims it is an issue with HP...(sigh....) No one has been able to help. Who will save me from the evil red vertical line???

Read other answers
RELEVANCY SCORE 59.2

I just removed the hdd from a laptop.(purchased SSD for the laptop.) I want to use the original hdd as storage.
I hooked it to an adapter and formatted the 1st partition, which had the OS.

I've always been successful doing this task, so I can't figure this one.

The drive,(disc 2) does not show in My Computer and when I used Easeus to format that partition, it said "failed."
When I launch HD Sentinel, it recognizes the drive as healthy and the temp,so I'm confused.

I tried to merge the partitions, also failed.

If I right click on either partition, there is no choice to make it active.

Do I have to format the complete drive?

I have backups of the music and video partition, but would like to avoid that choice if possible.
Attached Thumbnails

A:External hdd shows as "off line."I just removed this hdd from a laptop

I'm confused by the pictures. The drive is definitely showing up in Disk Manager as Drive 1, which is what it should do as the second drive.

Maybe I'm dense, but I don't see a problem other than the fact that the drive doesn't have drive letters assigned to it.

Edit: Duh! Wait! The first partition on drive 1 has to be a primary partition. Right now, both partitions are logical. That must be why they aren't being seen...

Read other 9 answers
RELEVANCY SCORE 59.2

First off, I'm wondering if this is an issue related solely to my laptop, or if it might just be a Vista issue; I have a Toshiba P305D-S8995E laptop, and when I right-click the speaker icon in the system tray and select "recording devices", it only shows "Microphone" as an available option. I would like to have the option to record whatever audio is passing through the soundcard similar to the way I do it on my Win XP computers, therefore I assume I'm looking for some sort of "Line In" recording option. So is not having a "line in" option an issue with my laptop's soundcard, or is this a Vista issue? Thanks in advance for any help.
 

A:Is there no "Line In" recording option for my laptop w/ Vista?

Read other 9 answers
RELEVANCY SCORE 58.8

The title tells it all...I went to use my Line In (blue) on the back of my Inspiron 3847, and it is now listed as a Speaker (Line Out) port.
Anyone know how to remap it? Or anything that I can do to get my Line In?

Read other answers
RELEVANCY SCORE 58.8

On my 3 year old laptop (HP dvEnvy7), a very thin line of black pixels has showed up. The first time it showed up was on the red background login screen, and I think tapping the monitor made it go away, but that might've been coincidence. I just noticed it again in the same place where the color of the screen is green. I was running an MBAM scan while that showed up and the line went away, again I don't know whether that was coincidence. I've read that this problem could be caused "by the traces going bad in the video cable going from the LCD the the main board" due to the laptop lid opening and closing. The lid is getting a bit loose. Is this the answer or could there be something more malicious, as my paranoia comes back to haunt me?

A:Thin black/dead vertical pixel line

If it's a single pixel width from edge to edge, it will almost certainly be a fault inside the LCD panel itself. Individual pixel drive signals are not carried on the LVDS cable connecting the panel to the mainboard, as that would require thousands of individual conductors. So a "hard fault" such as a complete black column or line is usually due to a bad connection in a heat bonded loom inside the panel, or an intermittent line or column driver IC which are also integrated into the bonded loom matrix inside the panel. Pressing or tapping the screen/frame can commonly make the symptom come and go in its early phases.
 
With that said, odd line-like faults can be a result of poor contact on the LVDS cable connector(s), and dismantling enough to gain access to this and cleaning the contacts with alcohol can solve it.

Read other 0 answers
RELEVANCY SCORE 58.8

Nothing that I know of just showed up today.

Read other answers
RELEVANCY SCORE 58

 
That's my little problem... I have ignored the little thing, and now it it irking me to do something. It's a little annoying to see this kind of just see it just move down my screen, while surfing the web, or playing gmaes (like the picture there).
 
Could anyone help me with this?
 
As well, sorry for the toaster quality photo. I only had a tablet on-hand to take pictures with...
 
 
Here is a slightly higher quality photo...

Spoiler
http://i1188.photobucket.com/albums/z419/TheRedMenace154/20130725_124245_zps01af3fc7.jpg

A:Vertical, thin, pink dotted line on computer screen...

Do you have or have access to a different monitor that you could try your computer with?You could also try booting into Safe Mode to see it also happens there.

Read other 3 answers
RELEVANCY SCORE 58

Hey all,

So all of a sudden while I was working earlier the open programs on the taskbar just suddenly started displaying as a thin vertical line. I have tried looking around to see if there was a setting, but nothing jumps out at me. I can still hover over and get aero peek function working fine, it's just that I can't see what the program is unless I hover over it.

Please can someone help?

(Image of problem attached)

TIA

A:Windows on the Taskbar have suddenly reduced in size to a thin line

The easiest thing may well be a System Restore point from just before the problem began.

System Restore

A Guy

Read other 1 answers
RELEVANCY SCORE 58

Hello Guys,

I'm new here so pleae go east on me. Its my first post. I noticed yesterday that there is a very fine thin line on the left side of my desktop. In the screen shot you can barely make it out, but you will be able to once you see ot from the left corner of task bar. it does not appear when i open a browser or a folder or even start menu. It only shows on the desktop screen and is really annoying. I tried disabling some odd services and restarted the computer as well, but still no luck. A little help will be appreciated.

P.S: Screen shot is below.

A:Thin White Vertical Line on the left side of desktop

Hi there
If you are using an external TV type of monitor go into the menu of the Monitor -- usually via a remote controller etc. Somewhere in the Video / picture setups you should see an option like auto adjust picture / size or something like that -- then the image should fit the screen perfectly.

(Assuming of course that you have set the resolution (in the PC settings) of the monitor to one it can handle).

Cheers
jimbo

Read other 8 answers
RELEVANCY SCORE 54.4

I've always heard and read that a paper thin layer is best but since the paste is really only there to fill microscopic pits and imperfections, wouldn't merely smearing a tiny bit on with a platic bag around your finger be even better? Wouldn't this be closer to having true contact between the cpu and the heatsink? Paper thin almost seems too thick.

Also, are antec silver and arctic silver basically the same or is arctic better? I had some of both from my last upgrade a few years ago but i was only able to find the antec.
 

A:Thermal paste question: Is "paper thin" actually thicker than necessary?

Paper thin is fine, not to little, and not to much. I use, and most people would probably reccomend using artic silver.
 

Read other 13 answers
RELEVANCY SCORE 54.4

I hope I can make this sound sensible. Ever since I obtained a PC with Windows 7 Pro, I have had a very serious problem seeing details in the display window, even though I have turned off all the special effects, switched to a customized Aero display scheme, and so on. The biggest problem is the extremely high level of brightness on all Windows screens, both native Win and non-MS apps, along with a very extensive use of "ultra-thin" characters in fonts and faded, dimmed, or extremely low contrast on the screen text. Sometimes, it gets to a point where my (admittedly aged) eyes just cannot read what is on the screen, especially with the almost pathological fixation Windows has with using very light blue or other similar colors everywhere.

I have been able to compensate by reducing the brightness on my monitor to about 20% of the optimum default setting, using a custom CSS with IE, and by extensively modifying the display characteristics using the Advanced Window Color and Appearance settings, and by totally shutting off all the Win 7 "effects". Although that worked fairly well for the native Windows software and MS apps, and for some other non-MS apps, it still does not totally fill the bill for me. I still have to mostly use the high-contrast theme to comfortably do things like read my email etc.

If I could just completely rid my system of the ultra-thin fonts, I think I could get by good enough. (I should mention that I never had any problems with Win... Read more

A:Replace default Windows 7 "Thin Character" Fonts

Hi Pete

What theme would you like to use Aero, Basic, Classic?

Look at Post #5 of this thread Navigation Pane Text

That will change a lot of fonts, if you need help let me know, if you are not comfortable changing the registry let me know I may have other ideas.

Jerry

Read other 9 answers
RELEVANCY SCORE 53.6

Any ideas?
I have a DV8305us, and bought a copy of Media Center from TigerDirect and did a clean install. After getting all the updates done last night, I still can't figure out how to make the text (in this site, for instance) look normal. It looks like it's anemic. I have screen resolution set to 1440x900. I did have it set to 1280x800, and the text looked "more" normal, but it also looked "unclean".
Thanks,
George

A:Just reinstalled XP MediaCenter, now all my text looks "thin"

BTW, It's not just on the internet. My desktop labels under icons look thin also. I'm sure it's just a setting, but i don't know where to look.

Read other 6 answers
RELEVANCY SCORE 52.8

How to remove the "Authenticated Users" "Create Folders" permission from the root of the C Drive via command-line?
I know this question has been asked many times before, but nothing works for us!
We tried the following:
Take ownership: I cannot take ownership using the Administrator account (local and Domain Admin accounts) of the root C:. Error Access Denied
Cuurent root C: owner is TrustedInstaller and acnnot be changed.
We cannot change or remove the Create Folders permission of the Authenticated Users of the root C: . Error Access Denied.
Drive C: is hidden via GPO, but many users can enter it from the File-Explorer and create folders in the root C:.
We do not want -for many reasons- to Block/ Prevent Access to C: via GPO.
We also tried to run cacls and/or icacls under the system-account (PSEXEC -i -s -d CMD). Error Access Denied.
icacls C:\ /deny *S-1-5-11:(NP)(AD)
Error Access Denied.
icacls C:\ /remove:g *S-1-5-11
Error Access Denied.
cacls c:\ /e /c /R "Authenticated Users"
Error Access Denied.
Also using GPO "Computer Configuration\Security Settings\Restricted Groups ..." does not work!
Now we have this issue on over 450 pc's on our network. Nothing work. Please help! How to remove the "Authenticated Users" "Create Folders" permission from the root of the C: Drive on command-line?


win_builder

Read other answers
RELEVANCY SCORE 52.8

I have a chart in an Excel spreadsheet, and it has several "series" in it. Some of the series are charted as "lines", and some are "areas" that fill in the entire background of anything from 0 to the value I have entered.

I have one particular series that is showing up as an "area" but I want it to be drawn as a "line" instead, so it DOESN'T fill in the area below it. I currently have the "background" as "none", but now I have a line from the last value down to "0", and that's what I want to avoid...

Thanks in advance!
 

A:Solved: Excel 2003 - how to change a chart data series from "area" to "line"??

Read other 8 answers
RELEVANCY SCORE 52.4

Hey guys I purchased a new SAGER NP7358 and it came in yesterday. However I have been getting numerous "DRIVER_POWER_STATE_FAILURE" blue screen of deaths at seemingly random times.
When I got the laptop I figured I would go direct to SAGER's website and download the newest Windows 8.1 drivers instead from the CD they provided. So I did all that and installed my programs like Chrome, Steam, Skype and Spotify. Shortly after the blue screens started to come up. I figured maybe restarting my PC or cleaning my registry would fix the problem. But it kept happening since last night to today at work.
I emailed the reseller and they told me to wipe my PC and install a clean Windows 8.1 copy while installing drivers from the CD and not SAGER's website. So started doing that and got all the drivers installed straight from the CD. And after 20 minutes of finishing installing driver I received the same blue screen... "DRIVER_POWER_STATE_FAILURE".
Here's my BlueScreenView screenshot
Attachment 47107

Here is the WhoCrashed summary

On Thu 7/17/2014 2:03:25 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\071614-7718-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x153FA0)
Bugcheck code: 0x9F (0x3, 0xFFFFE001B2DF3060, 0xFFFFD000DE506930, 0xFFFFE001BA719600)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT... Read more

A:"DRIVER_POWER_STATE_FAILURE" blue screen on new laptop

Hi SpaceRaven & Welcome to the forums ^_^,

I have analyzed your dump files and below is a short summary of that :-

Code:
1: kd> !irp ffffe001ba719600
Irp is active with 6 stacks 4 is current (= 0xffffe001ba7197a8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001b2df3060 00000000 fffff801c02eefc4-ffffd000de3cd8f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe001b68201f0 00000000 fffff8013b3a02d8-ffffe001ba4d0f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
\Driver\nvlddmkm nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe001ba4d0f08

Args: 00000000 00000000 00000000 00000000


We could clearly see from the summ... Read more

Read other 1 answers
RELEVANCY SCORE 52.4

Getting a blue screen error on a few HP T620 thin clients after being unused for two days. The error condition is found on a Monday morning after the device has been sitting unused for two days. Has anyone else run into this condition before or can anyone recommend a corrective action??  atikmpag.sys - address 8EABEE08 base at 8EAB6000, Datestamp 524e79de    

A:HP T620 Thin client Blue screen

Hi, You might get better assistance on the HP Enterprise Business Forum since you have a business class PC. 

Read other 2 answers
RELEVANCY SCORE 52

Hello,

I'm getting the error as "Stack overflow at line 46" while executing the command "Add-AzureAccount".

When I hit enter after that command, small window will open asking for Microsoft credentials. When I enter my username, it will process and gives me the error  Stack overflow at line 46.

Installed Azure commandlets on Powershell 4.0 and using IE8. I have reset the IE but still getting the same error.

Any help on this issue is appreciated.

Thanks,

Sridhar. A

Read other answers
RELEVANCY SCORE 51.2

I'm attempting to utilize the Asset Tag located in the Bios as the Host Name for the device.  I found in the forum how to script this, however, when I enter into the Bios I'm unable to update any of the System Information settings.  I've tried the Cntl+A but as soon as I hit it it just closes out of the window (window says "Press Any Key to Continue" at the bottom).  Any assistance would be appreciated. Matt

Read other answers
RELEVANCY SCORE 50.8

Hello, We have a lot of new T610 Thin Clients, nearly 100, and I have several problems when they reboot.They automatically reboot 3 times per day. We have an image that works perfect on T5730 and T5740 Thin Clients, but not in the T610. The only difference is that in T610 automatically enters as administrator. Some of them, randomly, get frozen when rebooting or I get a blue screen. Theses problems dissapears when I locally reboot them again pushing the button. But it usually appears again in another reboot. This doesnt happen in all of them, but on most of them. 0x000000F4 seems to be the power supply, but they are 100% new...0xC000021A seems to be winlogon.exe, the autologin to Administrator I suppose... These are pictures taken from the errors when rebooting T610. Frozen desktop, it starts rebooting and get frozen like this:Thi is the worst error, because if I get blue screen I can tell windows to automatically reboot, but when it freezes, I can do nothing and I have to locally reboot pushing the button..  Error 1:  Error 2:   Thank you very much.

A:T610 Thin Client gets desktop frozen and blue screens (0xC00...

Could you please explain why it would automatically boot into administrator's account on t610? What kind of customization have you done on this image?



====================================================Although I am an HP employee, I am speaking for myself and not for HP.====================================================**Click the KUDOS star on the left to say 'Thanks'**

Read other 9 answers
RELEVANCY SCORE 49.6

Hello and thank you for reading my post.

If I'm logged in Windows as user "u1", I can execute "cmd.exe" "as administrator" by choosing

Code:
"Start" -> "cmd.exe" and right-click "Run as administrator".
I would like to start another "cmd.exe" console as "u2" and "as administrator".
(So, "u2" is not the current logged in user).

The following command:

Code:
u1 cmd.exe> runas /user:u2 "cmd.exe"
runs "cmd.exe" as "u2" but not "as administrator".

I would like to do this in command line. Can you tell me how?

Best regards.

Nota:
u1 cmd.exe> means: I'm running "cmd.exe" as "u1".

A:Run "cmd.exe" as a given user and "as administrator" in command line

Hi Lea,

I don't believe that what you want to accomplish is possible. This is because Windows only "runs" one login at a time, unlike some true multi user operating systems, such as Linux.

If your logged in as U1, then you can only perform operations as U1, or as the Administrator. As far as running things as the Administrator is concerned, I believe in this case that you simply inherit the Administrators permission levels, thus permitting you to perform elevated activities.

If your U1 login has Administrator privileges then running as Administrator will be no different to running as U1!

Good luck

Davo

Read other 9 answers
RELEVANCY SCORE 49.2

I need to get windows 8.1 to setup

Read other answers
RELEVANCY SCORE 49.2

Just curious if anyone here has any info on this that I can look at? Any pricing range and official release date?
http://gizmodo.com/gadgets/laptops/rumor-dells-xps-m1210-getting-santa-rosa-on-june-26-263804.php

Also, do you know anything about this sleep laptop?
http://www.businessweek.com/technology/content/may2007/tc20070523_272039.htm

Im curious if someone has info on this. Id like to buy one if this is to be produced anytime soon.
 

A:Info on Thin Laptop?

Read other 8 answers
RELEVANCY SCORE 48.4

Hi,
I have a Samsung NP350V5C-A02UK and it is a great laptop. However, recently I have noticed a thin black border around the screen. I couldn't get a good picture with my camera but it looks very similar to this picture http://en.community.dell.com/support-forums/laptop/f/3519/t/19434351.aspx however, it is just a little thicker on my screen. I am not sure if it was there since I bought the laptop however, I am pretty sure it wasn't. Could any one please tell me how to fix this or if this is normal on all laptops.
Any replies will be greatly appreciated. Thank you.
Alex. 
 

A:Thin black border around laptop screen. Please help.

What is your screen resolution set to?

Read other 2 answers
RELEVANCY SCORE 47.6

Hi,

Had IBM Thinkpad 600E fixed under warranty for faulty screen (which had ceased to work) - problem turned out to be faulty motherboard, and motherboard was replaced.
Since getting the laptop back, there is a thin (about 4mm) vertical grey band down the entire screen which obliterates whatever is behind it. This line is about a cm in from the left hand side.
the band comes on from start up...ie through the black POST screen, and if operating in DOS - the same. The correct drivers and refresh rates, etc were already loaded. OS is Win98SE.
Wondering if it could be caused by something simple like a loose cable?
The reason I'm asking is that I'm in Sydney & have to send the laptop back to Melbourne to be fixed....if it is something that has happened in transit, there's no point sending it back to have the same thing happen again. Any ideas much appreciated.
Thanks
 

A:Thin grey vertical band on laptop screen

That could be a physical flaw in the screen, but hopefully it's just a loosened connection in the wiring involved.

It probably did happen in transit, since the repair techs would have noticed and called you if they saw it.

You could have a local tech try to check the wiring first, but you'll probably have to send it to Melbourne again. If so, use a bigger box and ship it wrapped in something big and soft like a down-filled winter coat or quilt. You might also want to insure the parcel for the round trip if your postal system or courier company offers the option.
 

Read other 2 answers
RELEVANCY SCORE 47.6

I received an EVOO 11.6? Laptop for Xmas. After using for 2 weeks it stopped charging, turned off while plugged in and will not turn back on. Any suggestions?
 

Read other answers
RELEVANCY SCORE 47.6

hey hi, i am observing black thin lines on my laptop screen resemble like pencil mark these grow progressively Any solution plz.??" i hav haier laptop running windows 8.1 pro.
 

Read other answers
RELEVANCY SCORE 46.8

i have windows 7 with old harddisk.

Sometimes, when i was booting, at first screen where it says

slave 1 :
master 1

it was showing empty of my hdd. (master 1)

SO i was restarting again it, until it could see my hdd for master.

BUt 2 days ago i changed the cable where i put in on mobo for my hdd to fix this.

And then i get this error minimal bash error.

MOBO has 4 slots of sata.

I have only win7 original. I dont have ubuntu or linux.

Hdd is 160 gb hdd with 3 drives.

after i got this, i put ubuntu live usb and i selected try ubuntu and when i was on that os, i could see my 3 drives. So there seems no problem for hdd as i guess.

Read other answers
RELEVANCY SCORE 46.8

My sister just got a brand new Dell Desktop......she uses a dial-up connection with a local ISP and had no problems with her old computer. Dell tech support has been of little help although they came out and even tried to correct situation putting a new modem in. It came pre-installed with AOL 9.0 and I am wondering if that is the culprit.....something is running in the start up menu referencing AOL......I am ever so confused! It also came pre-installed with Earthlink but do not believe that is the problem. We uninstalled AOL leaving the cab files but still the same error message when trying to connect to the internet. Modem Helper and Hyper=Terminal also show the same error message. Have tried everything to no avail and could really use some help.

Thanks in advance!

Desperate Betzi
 

A:"Phone Line in Use" error on dial-up connection on brand new computer

Call your local ISP's technical support.
 

Read other 1 answers
RELEVANCY SCORE 46.8

I want to use the command line to open the "Custom sizing options" window in Windows 10, please view the image, thank you.

Read other answers