Over 1 million tech questions and answers.

After virus checking and cleaning, "lsass.exe" and "ipwins.dll" missing

Q: After virus checking and cleaning, "lsass.exe" and "ipwins.dll" missing

My friend's computer seemingly got a virus, since it sent an email to somebody in her email list, on its own. She asked me to take a look.

She had a virus checker, but it had never been updated. So I installed "AVGfree" and ran that. It found a "trojan horse" virus as well as some other stuff that it said should be removed, so I did. I then ran "ccleaner" and it suggested to remove a TON of crap, like 500mb worth of files (she installs dumb stuff on her computer all the time). I removed these files. Then I ran "spybot" and it removed some stuff. I then defragged, which it needed.

So here I am, feeling like a hero, but then I reboot and there's a message saying that "lsass.exe" cannot be found. I cancel this message, and then there's another message saying that "ipwins.dll" cannot be found.

I tell her to just ignore these messages until I figure it out, but then she informs me today that she cannot access her email account on her computer. So I've gotta figure out how to fix this.

Any advice?? Thanks.

RELEVANCY SCORE 200
Preferred Solution: After virus checking and cleaning, "lsass.exe" and "ipwins.dll" missing

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: After virus checking and cleaning, "lsass.exe" and "ipwins.dll" missing

She could try the system file checker : tell her to prepare her XP CD (she'll need it if it asks to replace the missing files), then she will have to go to start => run, and type "sfc /scannow".

If that fails, she can perform a repair install if she has an OEM, retail or upgrade XP CD (recovery CD's cant' do that). She will have to boot on the cd, thus she needs first to change the boot order in the bios to CD-rom first. Then, when XP setup loads, choose the option "To setup Windows XP now" (not the one about recovery console). On the next screen (after the licence agreement) she should be given the option to repair her current xp installation by typing R.

Once that's done, if the CD wasn't a SP2 version, first thing is to go to windows update to reinstall XP SP2 and all updates she could have done since. Don't surf on the internet before any antivirus and firewall (either windows or another) is enabled.

Read other 2 answers
RELEVANCY SCORE 165.2

Hey everyone,
        I am trying to get the REST queries to work with the sharepoint end points instead of graph end points. I first created an app with relevant permissions and have given it the admin consent. Then I am hitting the https://login.microsoftonline.com/<tenant>.onmicrosoft.com/oauth2/token?Content-Type=application/x-www-form-urlencoded end
point with https://<tenant>.sharepoint.com as resource. I am then using the access token retrieved to give the rest call to https://<tenant>.sharepoint.com/_api/v2.0/drives/b!3indYSbqZ0-hVSPnCgIZy-2xDMh7jH9AuQnEzJMc6TEfQoSJvJT-R6tT0lFBQiPr/root/delta
but it is failing with "error":{"code":"generalException","message":"General exception while processing"}}. The REST response code is 401 Unauthorized. I have filed a Microsoft support ticket but they
have asked me to post on these forms. Can someone please help me with this? I am not able to move forward because the error is pretty generic and doesn't give any additional details.
Thanks,
Sai Kiran Katuri.

Read other answers
RELEVANCY SCORE 153.2

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Read other 16 answers
RELEVANCY SCORE 151.6

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

Read other 8 answers
RELEVANCY SCORE 144.8

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

Read other 1 answers
RELEVANCY SCORE 144.4
A:"msvcr80.dll is missing from your computer." WindowsUpdate_00000643" "WindowsUpdate_dt000"

Hi,

Please share more information with us, when did you found this iussue? what action are you doing when you found this issue?
Plese first refer to this KB, does it fit this issue?
NET Framework update installation error: "0x80070643" or "0x643"
http://support.microsoft.com/kb/976982/en-us
More information will be appreciate.
Regards
Yolanda
TechNet Community Support

Read other 5 answers
RELEVANCY SCORE 144.4

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Read other 6 answers
RELEVANCY SCORE 144.4

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers
RELEVANCY SCORE 143.6

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

Read other 14 answers
RELEVANCY SCORE 143.6

I am trying to use the fsutil file setshortname to set "Program Files" to PROGRA~1,

but the system is giving me an "Error: Access is denied" response.
what I have typed:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd /d D:\
D:\>fsutil.exe 8dot3name set 0
The registry state is now: 0 (Enable 8dot3 name creation on all volumes).
D:\>fsutil file setshortname "Program Files" PROGRA~1
Error:  Access is denied.
And I try it in Safe Mode.It is also "Access is denied.".
Can someone
help me?

A:"fsutil file setshortname "Program Files" PROGRA~1"=>"Error:Access is denied."

Hi TimFF,
This might be related with the UAC settings, check this thread:
give full permission for the users in program
files folder
The steps in the above thread is not recommended.
For the short name usage, we may consider to create a directory-junction from
PROGRA~1 to C:\Program Files:
With the following commands:
mklink /J "C:\PROGRA~1" "C:\Program Files"
Reference:
Mklink
Best regards


Michael Shao
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 142.8

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

Read other 6 answers
RELEVANCY SCORE 142.8

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

Read other answers
RELEVANCY SCORE 142.8

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

Read other 12 answers
RELEVANCY SCORE 142.4

Hi all,

I'm puzzling this one. In the folder options when I choose 'view' the radio button to show the hidden files is missing. I've already checked the registry at the HKLM/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced/Hidden

and everything seems ok (value for 'Type' is 'group' etc.). Using the XP tweak (Kelly's corner #155) shows the hidden files, but the button still missing.

Another thing that I encountered with was that from the start menu the "Help and Support" not working. Again, the registry seems fine, and the process is activated (started). This came up when I tried to use system restore option - with no success.

Virus scan didn't find alerts of any kind

To make a long story short- below is the log file of HiJackThis. Please review it and reply if you see something to be concerned with for repairing my computer.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:36:54, on 21-Dec-08
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\McAf... Read more

A:missing "show hidden files" button + "Help and Support" not working from start menu

Ok I found the answer (after quite a lot searching), as follows:

1. for the 'Hidden files' radio button - I used methods 1 and 2 from here-
http://www.technize.com/2007/05/13/s...s-not-working/

2. for the helpcenter I just reinstalled it as described here -
http://windowsxp.mvps.org/rebuildhelp.htm
note that the file 'dataspec.xml' is needed to be available for this, and it can't be done directly from the XP CD. The thing that worked for me was to insert the XP CD, and use the file that in my computer (C:\) and afterwards another file on the CD.

Again, all this happened with no virus detection, so I believe that there is no infection. However, if someone has remarks on the HiJackThis log I've put, feel free to add them.

Have a nice day,

Fitch.

Read other 1 answers
RELEVANCY SCORE 142

Howdy everybody!
When I hit the Windows & Print Screen keys, it is supposed to generate a picture of my Desktop into a Folder, within Pictures, labelled “Screenshots.”
But there is no such "ScreenShots" folder there!
What should I do? If I simply create a new folder, and label it “Screenshots,” will do that do the trick?  Or is there a more complicated fix?
Your help would be appreciated. Thanks!

Read other answers
RELEVANCY SCORE 141.2

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

Read other 2 answers
RELEVANCY SCORE 141.2

I have to set up a Broadband connection. But Local Area connection icon is missing. Someone told "drivers" could be missing... I installed few. But the problem is as it was.. please guide me in this regards.. Thank you

Screen shots Attached

A:"Local Area Connection" missing in "Change adapter Settings".. Plz hlp

Hi and welcome to the Forum
Is the Broadband connection working OK?
Where are you looking for the icon? Can you post a screenshot of the location where you expect to see the LAN icon?

Read other 9 answers
RELEVANCY SCORE 140.8

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

Read other 9 answers
RELEVANCY SCORE 139.6

Computer Specs:
CPU: I5-2400
MB: Asus Pz868
Ram: Corsair 8GB Vengeance LP
Using on board VIdeo For now
Maxtor HD Sata
WD Raptor Sata
HP Lightscribe DVD-r Drive Sata

Problem I was having once I completed my new build with old system parts was as listed in title. It started out as select proper boot device, and now it states ntldr is missing. From what I have been reading it seems as if my partition with my windows 7 install is not set active. I do not have my windows 7 DVD only my old vista DVD. I tried to boot into it to make use of CMD and attempt to make my partition active but I was unsuccessful to even get into CMD. I went into bios and forced booted from the drive with the OS and still same error, also I attempted to disable the other sata and run the computer again with no success also. Look forward to hearing from someone soon. I will be sitting by my laptop all night until this computer gets running.

A:"Select Proper Boot Device" now "NTLDR is missing"

Finally Got to command prompt but it shows my current drive listed as x: dunno if this will be relevant and helpful to anyone.

Read other 5 answers
RELEVANCY SCORE 139.6

http://tinyurl.com/k3vyb

I tried copying a fresh version of the file to \Windows\System32. No dice. I tried renaming it all uppercase and then all lowercase. Nothing. I put a copy in the root directory. No effect. I tried everything I could think of, but nothing worked.

Then--doh!--I stopped thrashing and did what I should have done initially: I dug into the Microsoft Knowledge Base and learned about XP's built-in Rebuild command. It can often easily fix "Missing HAL" and similar problems in just a minute or two. If you know about this command and how to use it, you can potentially save yourself hours and hours of manually reinstalling or rebuilding a failed operating system.
 

Read other answers
RELEVANCY SCORE 139.6

Okay, I have an ATI Radeon 8500 on my Windows XP system, and one day, after my dad had used the computer, the 3D video driver stoppeed working. He can't recall doing anything. So it goes. I think "whatever", downloaded the latest Catalyst drivers, and try to install it, only to get the message "INF Error, Video Driver Not Found" and then "Try to set up your adapter with a standard VGA driver before running setup". I tried googling for info (apparently it's a common-ish issue), but I never found anything that worked. I tried uninstalling anything ATI and then installing, to no avail. I tried uninstalling the error-listed VGA adapter from the Device Manager and then running install which didn't work. Rebooting after that also didn't work (it popped up with "New hardware found" after the reboot, but it couldn't find the proper drivers).

After an unedifying series of adventures I got to http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=45&kind=1 which has several drivers for my mobo. I first downloaded (obviously) the VGA driver, and tried to run setup. Unfortunately, after preparing the install, an Error message pops up saying "The system cannot detect the device, please confirm that the device is configured properly and restart the setup program." I then tried downloading the AGP upgrade, installed it, but nothing changed. I also downloaded the BIOS update, since it mention... Read more

A:"INF Error", VGA Driver "Missing" Installing ATI Catalyst Drivers

the radeon is not integrated with your motherboard, and the onboard video has probably been disabled in the BIOS. to install the appropriate drivers for an ATI radeon 8500 card you need to download and install the drivers from ati's website. from there you can download the latest version of catalyst and install that.
 

Read other 13 answers
RELEVANCY SCORE 139.6

Can anyone help me with this ? i got a picture ... i cant sendto desktop as shortcut the icon is missing .. help !!

A:"Desktop As Shortcut" Command Is Missing from the "Send To" Menu

Maybe this info will help:
Send To Context Menu - Remove or Restore Default Items

Read other 3 answers
RELEVANCY SCORE 139.6

The files in one of my folders aren't showing up. It's only that specific folder that is having problem. Whenever I try to access it, no files show up even though there are clearly files in it (Properties say 20.5 GB). And it will always stuck at "not responding"

This is what it looks like:

http://i.imgur.com/p2bCy4s.jpg?1

I've found a possible solution but since it deals with command prompt, I want to make sure I don't make things worse. I need to know what exactly the following command does:

attrib -h -r -s /s /d g:\*.*, in which g is the drive letter.

This video: says it reveals hidden folders but I'm not sure if it's relates to my problem exactly since Properties doesn't have "Hidden" checked. It only has "Read-Only" checked under the General tab.
 

Read other answers
RELEVANCY SCORE 139.6

when i right click on my DVD writer i do not get the options "OPEN",EXPLORE & AUTOPLAY"..How do i bring them back?
 

Read other answers
RELEVANCY SCORE 139.2

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

Read other 5 answers
RELEVANCY SCORE 139.2

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

Read other answers
RELEVANCY SCORE 139.2

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

Read other answers
RELEVANCY SCORE 139.2

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

Read other 5 answers
RELEVANCY SCORE 139.2

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

Read other 9 answers
RELEVANCY SCORE 139.2

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

Read other 6 answers
RELEVANCY SCORE 138.4

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\sy... Read more

A:"Your System Is Infected" Background + "Internet Security 2010" virus/malware problem

Hi and welcome to TSF.

I'm afraid HijackThis no longer provides the information we require.

We want all our members to perform the steps outlined in the link given below, as far as they possibly can, before posting for assistance.

http://www.techsupportforum.com/f50/...lp-305963.html

If you have problems with any of the steps, simply move on to the next one and make a note of the problem in your reply.

Please note that the Security Forum is always busy, so I would ask for your patience while waiting for a reply - it may take a few days.

This thread will now be closed.

Read other 1 answers
RELEVANCY SCORE 138.4

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\i... Read more

Read other answers
RELEVANCY SCORE 138.4

I suspected that from not so long time ago I'm getiing massage "Error with NT Autority System or something. Bla-bla..... lsass.exe did something ..bla-bla.... adres 128 or something. The system will reboot after 1 minute" (exus me I forgot what the messege was saying exactly). A minute after my PC reboots. So I was thinkin' is there any way to help me out kuz that stupid massage is pissing me off. I'm afraid that till I'm writing this tread the same lsass masage will pop-up again . Yeah it's really bad situation.
 

A:WTF is that "lsass.exe" doing in my "system32" folder?

your computer is infected with a virus! download and run HJT. don't have HJT fixed anything yet, just post the log here and wait for a certified member to analyze your HJT log. you will be guided step by step through the removal process.

when the message box appears the next time, go to start, run,type shutdown -a and click OK, this will abort the shutdown sequence.
 

Read other 2 answers
RELEVANCY SCORE 138

virus.. popup "Malware Wipe" "the spy guard" and alot of commercials like porn poker and more crap..
this is what I get when I start internetexplorer
Recommended Anti-Spyware Software: Pest Trap, Malware Wipe, Spy Guard Internet Security

TOP RATED
Pest Trap
Most popular spyware/adware cleaner software all over the world. Cleans all known viruses and worms.

Visit Website Free Scan
Malware Wipe
Became one of the most popular programs very fast. It`s really easy to use and at the same time very effective.

Visit Website Free Scan
The Spy Guard
Developed as the most efficient spyware cleaner with realtime protection.

Visit Website Free Scan
Brave Sentry
Award-winning spyware removal utility that will help you fighting all kinds of spyware including keyloggers, trojans and password thieves.

Visit Website Free Scan
AD Protect
World's leading software application that checks, protects and re-checks spyware and spam vulnerability in your home computer.

Visit Website Free Scan

WARNING! YOUR SYSTEM IS VULNERABLE TO HACKERS' ATTACKS AND BREAKDOWNS!
Attention! Your system is currently exposed. Any remote computer can easily browse following folders and files on your computer:
- \Windows\System32
- \Program Files\Internet Explorer
- \My Documents
- Drive C:\ files
Click here to download official intrusion detection system (IDS software)
YOUR PRIVATE INFORMATION IS IN OPEN ACCESS TO OTHER COMPUTERS
Your... Read more

A:Solved: virus.. popup "Malware Wipe" "the spy guard" and alot of commercials

Read other 14 answers
RELEVANCY SCORE 137.2

XP
Im looking for a way to re-create two folders, 1 my pictures, 2 my video. ive tried TweakUI, but that can only move a path. I tried repair (not Repair console) with XP SP2 CD, and ended up with a chose OS screen (which i found out can be avoided with msconfig.) but still regedit has a big whole where my pictues and my video should be. Ive both a SATA and an IDE drive, IDE is used as storage and SATA is partitioned and computer management say Extended partition, with boot on it and system is on the IDE one.
Before it got messed up i had my documents on the ohter partition, which is how i want it.
I would greatfull of some help and a detailed fix, i will fomat but even that is hard as that is part of how it all become so mixed up.
Vince
 

A:Missing Shell Folder for "My Pictures" + "My Video"

Vince, Tweak UI has that ability under the Repair section. Just use the drop down arrow button and choose My Videos and My Pictures one at a time, click the Repair Now button, click Apply/OK.

Tufenuf
 

Read other 2 answers
RELEVANCY SCORE 137.2

Hello all.

First off, I am in no means acquainted with any troubleshooting or fancy thing outside of everyday computer usage, so please respond as if you are talking to a dummy. I do have fairly decent common sense and Google skill however, which has given me enough confidence to try and fix this issue on my own.

Basically, one day I start my computer (running Windows XP Professional SP3) up and get a black screen saying:

"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this

Start in safe mode.
Safe mode with networking.
Safe mode with command prompt.
Last known good configuration setting (most recent setting that worked).
Start Windows normally."

For a few times, I was able to get Windows working with the last two options, but before I could dedicate time to fix the issue, it became so that none of these options worked, and I got caught in a restart cycle with this screen. Last things that I can recall that may have caused this: Windows Update or CCleaner Registry Fix (just something I do sometimes to make sure everything is working, nothing was wrong prior).

I bought an external HDD enclosure with hopes of popping my internal into it, and saving my stuff onto my laptop before messing around. Oddly, in My Computer, the 2 drive icons (a System Recovery one, and my Main one) would flash for a few seconds, every few minutes, and when I'd quickly click them, it'd say the... Read more

A:"Windows did not start successfully" to "ntldr is missing"

BTW if it IS in fact possible to copy certain files from my laptop's OS, I just realized I can probably just copy those files into the desktop internal (when plugged in as an external) instead of going through the whole DOS thing? But keep in mind, that's the small 3GB partition, so I don't know if that would even work. Unless putting those boot files on that small partition, will help open up the rest of the drive. Not sure how that works.
EDIT: Apologies for the double post, just saw the "edit" button.
 

Read other 2 answers
RELEVANCY SCORE 137.2

There appears to be no open thread on this issue...disappearing context menu "new/textdocument" option.

After trying several alternate text editor demos I found that my registry .txt entry was empty except for the (default) line item...I replaced the entry with an expanded entry found elsewhere on this forum which called for notepad.exe and included ItemName and NullFile etc.

After rebooting and checking my program associations to verify that my new editor, EditPlus, was the default, I found that the "new/text document" option appears and works in all the usual places including the desktop...

But there must be more to the story... Notepad still appears in the ItemName entry. Is this just a default reg entry, with the actual default program assignments appearing elsewhere?

BTW, as an old poster suggested elsewhere X-Setup has been de-commissioned but is still available on MajorGeeks. It has some editing capability but wouldn't add a new TXT item because "it already existed" (already registered).



W7 x64 SP1

Read other answers
RELEVANCY SCORE 137.2

Hello,
I really need your help. I have exams coming up soon so need to get back on my computer as soon as possible. I have a notebook with windows XP. The model is Compaq mini CQ10-400.

When I switch the notebook on it displays the "BOOTMGR IS MISSING"... message. I cannot get on my computer passed that screen, apart from when I press escape after pressing Ctrl, Alt, Del. It gives me 4 options ... " F1 system information, F2 system diagnostics, F9 boot device options, F10 BIOS setup."

There is no disc drive so what should I do, and what is the easiest way to fix this issue.

Thanks in advance.
 

A:"BOOTMGR IS MISSING""PRESS Ctrl+Alt+Del to restart"

Read other 16 answers
RELEVANCY SCORE 137.2

Hello,
I really need your help. I have exams coming up soon so need to get back on my computer as soon as possible. I have a notebook with windows XP. The model is Compaq mini CQ10-400.

When I switch the notebook on it displays the "BOOTMGR IS MISSING"... message. I cannot get on my computer passed that screen, apart from when I press escape after pressing Ctrl, Alt, Del. It gives me 4 options ... " F1 system information, F2 system diagnostics, F9 boot device options, F10 BIOS setup."

There is no disc drive so what should I do, and what is the easiest way to fix this issue.

Thanks in advance.

A:"BOOTMGR IS MISSING""PRESS Ctrl+Alt+Del to restart"

Hi and Welcome to TSF!

The only way to fix this is to use startup repair from the Windows XP CD.

Read other 15 answers
RELEVANCY SCORE 137.2

hi every body
My PC has lots of files called "Thumbs.db" & "System volume information" in all its drives.I cant delete these files and I think the cause of shutting my pc down automatically and showing blue screen is these files.the operating system is win xp/sp2.
I don't know what to do with these and what anti virus will delete them.please help me.
thanks
 

Read other answers
RELEVANCY SCORE 137.2

my computer was hijacked by "support tool" a so called virus protection hijacker. i'm in safe mode with networking now & attached you see my hjt log file. help please. THanks!

actually, i'm on a different computer. it has windows xp home ed. & its a dell inspiron 530S

also, in trying to fix the problem initially, my wife deleted the file "rundll32" beacause the virus stated that had a virus error. so this file may be missing as well & we may need to replace it.
 

A:Computer Hijacked by "Support Tool" "Virus Protection" Prog

I posted this yesterday to get help for a "Support Tool" hijack on a computer. Please help. Log file attached. Thanks.
 

Read other 3 answers
RELEVANCY SCORE 137.2

I think I am infected with Malware, Spyware, or some type of virus. My desktop background has become a bright red screen with a toxic symbol on it and underneath it, it says "Your Privacy Is In Danger!" On the bottom right, in the taskbar, right next to the time and date, it says "Virus Alert!" My computer is also attempting to run anti-Spyware programs all by itself, opening browsers with websites to Spy programs and pop-ups warning me of possible hackers. Below is my HJT log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 06:36: VIRUS ALERT!, on 7/20/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\AVPersonal\AVWUPSRV.EXE
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\ewido anti-malware\ewidoctrl.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\System32\ezSP_Px.exe
C:\WINDOWS\System32\hkcmd.exe
C:\WINDOWS\AGRSMMSG.exe
C:\Program Files\AVPersonal\AVGNT.EXE
C:\Program Files\Common Files\Real\Update_OB\realsched... Read more

Read other answers
RELEVANCY SCORE 137.2

The "Idle-time Full System Scan" in Norton 360 v4 is bogging down my computer constantly, and there is no option to turn it off in "Automatic Tasks".

I contacted Norton and (after several attempts to find someone at Norton who could understand what I just said above and getting "hung-up" on over Norton chat. Inexcusable!!!) I was able to get a hold of a technician who told me that Norton intentionally removed this option "for security reasons, because they didn't want people turning it off".

The problem is, people will then be forced to turn it off by turning off ALL scheduled tasks (under "Settings/Scheduling/Schedule:Manual Schedule") and that is an even worse security problem than the relatively small one that would be created by turning off idle-time full system scanning.

Once the system has completed a full system scan, all files are on-access scanned anyway, so running a full system scan every 3-4 days is rather silly and extremely annoying--especially, because it will continue to try to run every time the system is idle if you cancel it.

A warning urging the user to not turn off idle-time full system scans without fully understanding the risks, and after explaining the risks, would be VERY preferable. Or at least the option to run the full system scans when the system is idle on a certain day of the month/week! The schedule for idle-time full system scans really needs to be separate from other tasks. In fact, t... Read more

Read other answers
RELEVANCY SCORE 136

please help, please im begging here guys, im having a nightmare, ill burn my comp soon, help please!
 

A:i posted "lsass virus" just a bit down, please help, noones even read it i wan to cry

be patient man! The only reason that your not getting replies is becuase. 1) maybe no one on right now knows how to help you. 2) they are busy.

posting 2 times on the same thing isnt going to help, its just going to make people agravated.
 

Read other 3 answers
RELEVANCY SCORE 136

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

Read other 1 answers
RELEVANCY SCORE 136

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

Read other 1 answers