Over 1 million tech questions and answers.

ATTEMPTED TO SWITCH FROM DPC affected by ntoskrnl.exe

Q: ATTEMPTED TO SWITCH FROM DPC affected by ntoskrnl.exe

Hello there, i'm new around here, I've recently encountered a BSOD out of the blue while the PC was idling. So far it only happened once, but I don't want to take any chances.

The affected driver was commonly known as the ntoskrnl.exe, it happened a year back but the affected was associated with some other drivers that I known, so solving it wasn't that hard. But this time it doesn't associate with any other driver ( I may have been wrong ). Anyway, this issue occur right after I've updated the AMD Catalyst Driver, which may be root cause of this issue, but I just gotta make sure.

I've attached my recent dumpfile below, if I've made any mistake on posting, or miss out any information required for debugging, please let me know.

Many thanks

RELEVANCY SCORE 200
Preferred Solution: ATTEMPTED TO SWITCH FROM DPC affected by ntoskrnl.exe

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: ATTEMPTED TO SWITCH FROM DPC affected by ntoskrnl.exe

Additional data is required: BSOD Posting Instructions

Cause is RAMDiskVE.sys, for more we need additional data.
Driver Reference Table - RAMDiskVE.sys

Code:
*** WARNING: Unable to verify timestamp for RAMDiskVE.sys
*** ERROR: Module load completed but symbols could not be loaded for RAMDiskVE.sys
1: kd> lmvm RAMDiskVE
start end module name
fffff800`d2da0000 fffff800`d2db8000 RAMDiskVE T (no symbols)
Loaded symbol image file: RAMDiskVE.sys
Image path: \SystemRoot\System32\Drivers\RAMDiskVE.sys
Image name: RAMDiskVE.sys
Timestamp: Tue Jul 22 16:29:05 2014 (53CE7531)
CheckSum: 000234C3
ImageSize: 00018000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 0 answers
RELEVANCY SCORE 59.6

I have a feeling it is something to do with the windows anniversary update and a driver that has been installed (if I had to guess something to do with intel rapid storage technology as I had to have a custom version running before to avoid bluescreens, however I cannot remember the version number and am unsure if windows updated it.)
 
*Edit* Windows has not updated intel rapid storage, it is the same version I was using before.
 
Anyway, it was happening as I was playing Gears 4 and I have attached the perfmon and information asked for within the thread. (also perfmon is showing devices that are not recognised and detected, I am aware of these, one is an xbox 360 controller which does not have drivers and the others are my wireless device which I have disabled as I am using ethernet.)

A:BSOD, cannot peg down what is causing it (Attempted switch from DPC)

Please disconnect the xbox 360 controller from the system and uninstall it's software.The earlier versions of these devices are known to cause BSOD's on some WIndows systems. As for the disabled wireless device - please re-enable it, then update it's drivers.Once the drivers are updated, then feel free to disable it again. Your UEFI/BIOS (version 4206) dates from 2013.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  If you are able to install the update through Windows (without booting from an external drive), then go ahead and update it.  WARNING - if the computer might shut down during this procedure, please don't do it, as this may physically damage the computer and prevent it from booting.FYI - W8 and W10 communicate more with the UEFI/BIOS than previous versions of Windows, so it's important to ensure that the UEFI/BIOS is kept up to date (and that outdated UEFI/BIOS' may be the cause of some compatibility issues).Although you appear to have a reasonable number of Windows Update hotfixes for this version of your OS, please double check for any new Windows Updates.  It only takes one update to cause a problem, so it's essential that you have all of them.  The actual number is not important.  Rather it's important that you checked manually, installed any available updates, and didn't experience any errors when checking or updating.Please uninstall the Corsair Link soft... Read more

Read other 0 answers
RELEVANCY SCORE 58.8

Hello everybody.!I would appreciate any help.Started getting BSOD(Attempted_Switch_From_DPC) almost every other day and I've paid attention that this usually happens when laptop is idle.My laptop is a month and a half old and it shipped with 8GB DDR4 ram soldered in MB(  base ram speed is 2666mhz but the real working speed that shown in Task Manager is 2400 because of CPU).So I decided put extra RAM and it turned out that my laptop supports up 48GB RAM so I bought 32GB DDR4 2666 module from Samsung and got 40GB in total. I'm not sure maybe it's coincidence but I started getting these BSODs after these things: installing RAM, updating BIOS, updating Windows system (Cumulative update), using USB type-C adapter with 3-USB and 1-LAN output.  I don't know who the culprit is.Here is the link to the DUMP file, data from Msinfo and Speccy -  https://1drv.ms/u/s!AjF0Y2tXlq21hAVSSnCL8_95zho4?e=rt8xuIMy laptop is Lenovo ThinkPad T590Records from Event Viewer:Log Name:      SystemSource:        Microsoft-Windows-Kernel-PowerDate:          11-Sep-19 11:43:42Event ID:      41Task Category: (63)Level:         CriticalKeywords:      (70368744177664),(2)User:          SYSTEMComputer:      LAPTOP-1NK0CFUHDescription:Th... Read more

Read other answers
RELEVANCY SCORE 58.8

I'm getting Blue Screens of Death everytime I use Firefox v40.0.3 and it ONLY occurs when I'm using Firefox.
 
Code: 0x000000B8
Attempted Switch From DPC
Faulting Driver ==> HAL.DLL
Every BSoD has the same error data.
 
Windows XP SP3 all latest drivers and running stable eccept for this problem.
Intel Core 2 Duo 3.33GH
4 GB memory
SATA 320GB WD drive
nVidia Quadro FX580 latest drivers
HP xw4600 Workstation
 
I've tried everything I can think of, like turning Hardware Acceleration on/off
Makes no difference what other programs I have running at the same time nor what I'm doing. It ONLY occurs while Firefox is running even if Firefox is loaded in the background but I'm not actively using it.
 
I tried using IE v8 (the last one MS offered for Win XP) extensively and it worked fine. No BSOD and this was for several hours. Started Firefox in "Safe Mode" still get BSoD. Ran virus scans with no hits.
 
I have a near identically setup of XP on a second primary partition that I can set active on/off hidden/not hidden. Firefox works fine on this second partition. It obviously has the same hardware and all drivers are the same too.
 
I have attached one dumpfile output listing by BlueScreenView. Every BSOD dumpfile is the same except for the date/time.
 
======================================
Dump File         : Mini090715-01.dmp
Crash Time        : 9/7/2015 1:53:46 AM
Bug C... Read more

Read other answers
RELEVANCY SCORE 58.8

On my Son,s computer . Before the update I made a image with macrium reflect , updated and the computer will not run , I keep getting a attempted switch from dcp error after anniversary update .. Ideas , thanks .

Read other answers
RELEVANCY SCORE 58.4

I started getting this error and BSOD after the last major update (Anniversary update?). My PC starts fine and is OK for hours, then suddenly falls over. It never did this before the update.

I have updated all my drivers and also run a scan and repair on the registry using the Registry utility in Advanced System Care, but it's still happening.

What else can I do without just rolling back to a restore point (which would presumably just try to update itself again...)

Thanks,

Read other answers
RELEVANCY SCORE 58.4

Since installing Windows Updates on Jan 2, 2018 my TPYoga 12 has been giving BSOD's when waking from sleep. The message is "Attempted switch from dpc". It happens at least once a day now. Sometimes the next boot is successful, and sometimes it happens a second time after the system tries to reboot which then shows a diagnostic screen. Choosing to boot as normal from that diagnostic screen then does boot successfully. This is on a system running Win10 Pro V1709 build 16299.192.  I have seen one other user with a TPY12 report this recently (see post in german). Looking at many posts regarding this specific message over the years it seems to be related to a driver issue. Given the rather intense troubleshooting instructions for issues like these I'm hoping someone here has found a fix.  Below a screencap of my deteriorated system reliability. 

A:ThinkPad Yoga 12 BSOD since 2018: "Attempted switch from dpc"

Some more searching led me to this post stating that it's related to the Synaptics touchpad driver. Windows did install four Synaptics items the day before things went bad. I have uninstalled the touchpad driver in Device Manager, re-downloaded the driver package from Lenovo's driver page, and installed it. Let's hope this fixes it, and let's hope Windows doesn't "update" the driver again.  For the record, here are the updates that ran right before the problem appeared:  

Read other 1 answers
RELEVANCY SCORE 57.6

Hello:

I am getting BSOD's: Attempted switch from DPC. Kernel-Power. Event ID 41. Task 63.

I installed a new hard drive and Windows 10 to fix my laptop from previous BSOD I was having with Windows 8.1 but now I am getting a different BSOD. Usually It happens when I have to restart the computer after installing software/drivers. Also after I used the program to test the memory RAM: mdsched.exe.

I will really appreciate if you can help me to fix this problem.

Thank you.

Read other answers
RELEVANCY SCORE 52.4

Hi - it sucks that my first post here is a BSOD Crash dump but here goes:

I am an overclocker and I have experienced multiple BSOD's before all of which I can usually fix myself. But this one is driving me nuts

Bluescreen reports the BSOD as caused by ntoskrnl.exe+25b20. Interesting to note is that this happens only when the system is under almost full load - CPU at 100% during [email protected] crunching, as well as one of the two GPU's folding as well. IIRC, there were no BSOD's during only CPU folding but I'd have test it again to confirm.

Attached is the perfmon report as well as the report from the BSOD file collection app.

OS - Windows 7 Pro x64 SP1 OEM (I bought the OEM version - custom built computer)
Hardware age - built January 2011 - but cleaned and rebuilt a couple months ago
OS age - about 2 months

CPU - Core i7 950 @ 4Ghz
GPU - 2x EVGA GTS 450
Mobo - ASUS P6X58D-e
PSU - Corsair AX750

Thanks in advance for any help.

A:BSOD 0x0fc ntoskrnl.exe - Attempted execute of no execute memory

Update: I confirmed that it is NOT a CPU overclock issue - 100% just CPU runs just fine. Its when a GPU is factored in that it crashes. About 5 minutes in with 1 or 2 GPU's at full load combined with the CPU at full load causes this.

Read other 1 answers
RELEVANCY SCORE 38

Hey guys so I've been getting some random BSOD errors every few days or so. I usually leave my computer on when I am at work or sleep and either when I come home or wake up my computer is off. So I turn it on and it says that the computer didn't shut down properly when I start up. I downloaded the BlueScreenView and noticed I've had some BSOD three times within 10 days. One was a PAGE_FAULT_IN_NONPAGED_AREA error which I believe was a RAM problem (i bought new RAM and installed it plus OCed it to 2133, but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again), but after that I've gotten two IRQL_NOT_LESS_OR_EQUAL errors related to ntoskrnl.exe. I did some research online and from what I read it could be a number of problems. I'm just not sure where to start and could really use some guidance and advice. I uploaded my dmp files for anyone who knows how to look at these.

Thank in advance.

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWA... Read more

Read other 9 answers
RELEVANCY SCORE 37.6

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

Read other 2 answers
RELEVANCY SCORE 37.6

Jan 2014
//-------------------------------------------
How to Solve :
1- I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state.(original windows )
2- Never installed Norton internet security again , I'm using Microsoft Security Essentials now.
3- Updated my Graphic Card Driver , Intel Wifi Driver , Sound Card Driver And some other drivers ...
It's been two months now with no BSOD ... Thanks to dear Arc and gregrocker
Thank you guys
//-------------------------------------------
Oct 2013
//-------------------------------------------
Hi guys , It's almost a year that I have problems with BSODs , it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag.sys file in Windows System32 folder. But now it's about 3 months that I get ntoskrnl.exe BSODs !! in lot's of situations !! Web surfing , Windows log on , Working with Unity , Working with files and ... Really lot's of Times , Even in Safe Mode with Networking !! I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode , BTW I dunno how to solve it !!

Please Help me , these BSODs are sooooooooo annoying

Here is my System Specs :
It's Msi GX640
CPU : Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz
Main : MICRO-STAR INTERNATIONAL CO., LTD MS-1656
Bios : BIOS Date: 09/23/09 11:58:43 Ver: 08.00.10
Memory : 4.00 GB
HDD : ST9500420AS ATA Device
Sound Card : (1) AMD Hig... Read more

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

Read other 9 answers
RELEVANCY SCORE 37.6

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

Read other 1 answers
RELEVANCY SCORE 37.6

Got my first blue screen of death tonight, had 2 firefox opened one watching youtube video another browsing internet. After bsod it restarted i login but just black screen with cursor, ctrl alt delete worked so i shut my computer down. Boot up normally after, check my minidump file, bsod cause by ntoskrnl.exe. Did little search on google find has to do with ram and hard drive.

Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate(value/threshold/worst is all 0) in SMART statue. Im not sure if i can trust this wd diagnostic on my crucial ssd, there are alot of unknown in SMART statue too. Theres no ssd diagnotic for crucial, there is a firmware not sure if it helps. So i downloaded and ran crystaldiskinfo on my ssd, health statues says good, it doesnt say end to end error rate like wd. Instead same ID B4 line says "unused reserve nand blocks" instead. Is my ssd good? i havent ran a test on my ram yet.
This is almost 3 month old build
Asrock x99x killer
i7 5820k
gtx 970
850w
crucial 2x4gb
crucial 256gb ssd
wd blue 1tb

Heres info of bsod with bluescreenview
Bug Check String- IRQL_GT_ZERO_AT_SYSTEM_SERVICE
Bug Check Code - 0x0000004a
Parameter 1- 00000000`7709dc4a
Parameter 2- 00000000`00000002
Parameter 3- 00000000`00000000
Parameter 4- fffff880`08167b60
Caused By Driver- ntoskrnl.exe
Caused By Address- ntoskrnl.exe+72a40
File Description- NT Kernel & System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers
RELEVANCY SCORE 37.6

Hi,
to make things easier for you,below is the Bug Check String, Driver, and crash address SYSTEM_SERVICE_EXCEPTION___dxgmms1.sys___ntoskrnl.exe+75bc0
MEMORY_MANAGEMENT_______ntoskrnl.exe____ntoskrnl.exe+75bc0
SYSTEM_SERVICE_EXCEPTION___ntoskrnl.exe____ntoskrnl.exe+75bc0
NTFS_FILE_SYSTEM___________Ntfs.sys_______ntoskrnl.exe+75bc0
IRQL_NOT_LESS_OR_EQUAL____ntoskrnl.exe____ntoskrnl.exe+75bc0

(unrelated:how could I make nice table above?)

I have searched the forum.

Problem 1: BSOD randomly, usually graphics related. eg, flash games in chrome, graphics related software (Mathematica).

Problem 2: I use an internet usb 3G device to connect to internet. Every morning the device will not connect to internet and computer will hang on shutting down screen when I restart. I have to manually turn off and back on again. I think this may be a dying capacitor on motherboard that needs 2 boot's to get excited.

Problem 3: Chrome "aw snap" happens regularly and is usually flash content related, even ad banners seem to cause it from time to time. I have reinstalled chrome, checked plugins etc etc no luck. Internet explorer runs stable,but for example in flash games it seems to momentarily freeze and then catch up with itself again. These are moments where I think chrome would have crashed.

Things I've done:

1) SFC scan. All's well.

2) Memtest. I did 1 pass, it took an hour, everything fine. Will put it on over night tonight.

3)Checked for latest drivers. A... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with pro... Read more

Read other 1 answers
RELEVANCY SCORE 37.6

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

Read other 3 answers
RELEVANCY SCORE 37.6

Need to no if I have this right

they have a dsl modem going to a Linksys router to a 24 port switch then to a little 4 port switch. sure, so then Would it be modem to router then router to any port on the big switch or is there an uplink port on the big switch it should go to? then you would hook a cat5e from one of the regular ports on the 24 port switch and run it to the uplink port on the 4 port switch need to no if the whole sequence is right. Hope someone can help, john will told me the cable would go from the big switch to the uplink on the small switch but I am wondering if I have it all right or not and wonderiing about from the router to the 24 port switch does the cable just go in a regular port in the big switch or if there is an uplink port does it go there. Hope you can understand my rambleing here. Thanks (please don't send me to a link) just need to no modem to router to regular port or uplink port on 24 port switch then from regular port on 24 port switch to uplink port on the 4 port switch. Thanks
 

A:Solved: Windows xp hookup question for modem, router, switch, to switch?

Router to uplink port on 24 port switch, and then normal port on the 24 port switch to uplink port on the second 4 port switch. An auto-MDX port on a device negates the need to worry about uplink ports for that particular cable connection.
 

Read other 3 answers
RELEVANCY SCORE 37.6

I have Windows 7 Professional on my PC. In the first load I had, the PC should automatically detect if the LAN cable was plugged in, turn off the wireless radio, and change the network icon in the right bottom corner to reflect the cable was now in use.
Unfortunately, I had to reload my PC, and since then I can't get it to do it again.
So, what I'd like to achieve is this: Have Windows automatically detect when the cable is plugged in, turn of the wireless radio, and change the network icon in the right bottom corner to reflect the cable is in use - and, obviously, vice versa.
Can someone tell me what I need to do, please?

A:Have Windows 7 automatically switch to LAN when cable is plugged in and switch to wireless when it's removed

Hi,
There are two methods can help you.
1. Go to <Network and Sharing><Change Adapter Settings> and right click your wired and wireless adapters one at a time to change the properties. Select IPv4, click <Properties>
then click <Advanced>. For each one, clear the "Automatic metric" check box and assign the metric value manually. Setting your wired adapter?s metric value lower than wireless adapter one, such as ?1? for wired adapter and ?2? for wired adapter.

2. Go to <Network and Sharing><Change Adapter Settings>,
hold down 'alt' to bring up the "File" menu, select "Advanced", select
"Advanced Settings" from the dropdown menu, adjust the priority of your wired adapter higher than your wireless adapter in the "Advanced Settings" window under the "Adapters and Bindings" tab.
Hope this helps.Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Read other 3 answers
RELEVANCY SCORE 37.6

I have a wireless router connected to my modem, and ALL PC's connect to that for internet.

I also have a gigabit switch I use to transfer data in between several of the machines. I do it quite often and I don't want it eating up the wifi bandwidth.
I have done it before, but it has been a long time and I cannot remember how I forced internet traffic over the wifi and local traffic through the switch
Is the only way to do it to specifically tell Windows to use the IP address of the LAN connection? I know it will work that way, forcing local traffic directly to that IP, but I seem to remember there being an easier way to do this.

Thanks.
 

Read other answers
RELEVANCY SCORE 37.6

Am a new Networking BEE I had built a small network of 20 systems at my office and there I had connected a switch and router.

All the switch ports have been covered by all the systems and one port is given to the router
switch(20)----router(LAN)
|
|
|
HUB(8ports)

And also I connected a HUB to the switch ..

It works fine for my internet connections to all the systems but how do i make authentication of passwords and username to my network systems from one server which I use server 2003 at one system

let me know the detailed step by step procedure to build.........

I would feel very happy If at all any Suggestions for me to make my Business grow.....

As early as possible ................

Thanks in Advance

Smiles....[][]
 

A:Connection of Router to Switch and also a Hub to Switch - N/W systems internet share

>>I use server 2003 at one system

you need to enable Network Login, but that requires that win2003 have

a domain controller
a DHCP service
and a DNS service.
the Domain Controller is just another name for LDAP and it becomes the control point
for all systems.

get some books on Configuring Win2003 Server
 

Read other 4 answers
RELEVANCY SCORE 37.2

I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?

A:Random BSODs ntoskrnl.exe+26ee0 & ntoskrnl.exe+5063dc

  
Quote: Originally Posted by RossTTU


I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?


The verified crash was related to C:\Program Files (x86)\Lavasoft\Ad-Aware\KernExplorer64.sys

I would remove Ad-aware AT LEAST TO TEST

Read other 1 answers
RELEVANCY SCORE 37.2

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

A:BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 2 answers
RELEVANCY SCORE 37.2

Hi everyone, I searched through the forums but couldn't really find what I was looking for.

Currently we have a DHCP server set up to a switch, that has a special line connecting to a switch in our shop which is just across our back lot, giving network access to the few computers over there. They recently put in a new machine that needs network access, but they have already accidentally cut two ethernet cords. I'm looking to provide a wireless solution for the machine, but I don't want to have to spend a few thousand dollars on a large wireless switch.

Can I plug a wireless router into the switch in our shop, and essentially turn it into a wireless bridge, or is there another, simpler way to do this?

If this has already been answered, sorry for missing it!

Thanks!
 

A:Solved: DHCP Server -> Switch -> Switch -> Wireless

While you could use a router, or even configure the router to act as an access point, why not just buy a true access point? They start at $27: http://www.newegg.com/Store/SubCate...ame=Wireless-AP-Bridges-Repeaters&Order=PRICE
 

Read other 2 answers
RELEVANCY SCORE 37.2

Is it possible to switch off a laptop screen - laptop runs Windows 7 - and prevent it being switched on again, without inputting a password?

I need to keep the laptop running, therefore I can't put it to sleep and logging-off has become a pain.

I've tried the Power Options, but the display comes on again when the mouse is nudged.

I've also tried "Fn + F6" on my Acer laptop, which switches off the screen, but an accidental key press brings it to life again.

Any ingenious little prog around? None I've seen have that crucial password privacy aspect.

A:How to switch off laptop screen & password protect switch on again?

a password is is used when you are out but if you are home you don't need a password.. unless you don't trust somebody...

Read other 3 answers
RELEVANCY SCORE 37.2

hi all,

system gets hang, pc configuration is intel 865bgf motherboard with PIV 3ghz ht processor with 80 gb samsung hdd and 266 mb ddr i reinstalled the operating system (xp pro) changed smps and changed 256 ddr but the problem still continues, when the system gets hang i am not able to use my keyboard or mouse i have to restart the system , please help me and also i have to know weather is this the hardware issue or the software issue, and also i am facing same problem with same configuration with the other customer pc .
warm regards,
pradeep
 

A:system gets hang (it freezes) only option is to switch off and switch on

Read other 12 answers
RELEVANCY SCORE 37.2

One question I need to know

If you go from DSL modem to Router then Router to switch
my question is then
If I wanted to hook another mini linksys switch into the bigger switch would you run the cat5e cable from the first switch to a reg port in the second switch or would you run it to the uplink port and then hook the 1 or 2 computers into the reg ports of the second switch.??
 

A:Solved: Windows xp-question of hookup switch to switch?

Obviously, run it to the uplink port if available.
 

Read other 3 answers
RELEVANCY SCORE 37.2

We have 3 16 port switches connected to our router. Everything has been in place and working well since last May.
Beginning this week, as soon as one employee arrives and turns on his pc, every pc on that switch loses internet access. Not network access - can still see other pc's - just no internet.

The pc causing the problems is the oldest on our network, but it is running Win10 like the others. When I check the stats on the router for his IP address, his has the highest transmission numbers.

We are scheduled to replace that pc within the next 2 weeks, but is there something I can/should look at doing in the mean time?
 

Read other answers
RELEVANCY SCORE 36.4

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

Read other 1 answers
RELEVANCY SCORE 36.4

I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere.

So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests without error.

I have enabled driver verifier (following the guide on this site) and this has not caused anynew BSOD's.

I also get a random BSOD on startup but it has happened so infrequently i have been unable to boot with disable automatic restart on system failure enabled to capture the stop code.

I really could do with some expert advice please.

This is my first post so i apologise if i have missed something important but i have tried to read as much info as possible before posting.

A:BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40

Unusual one you got there think it may be a windows problem please run sf tool and upload all files not just dumps and try running an sfc scan
SFC /SCANNOW Command - System File Checker option 2

Check system temperatures also

Read other 9 answers
RELEVANCY SCORE 36.4

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
***********************************************... Read more

Read other 9 answers
RELEVANCY SCORE 36.4

Hello everyone.

I have been having some problems with my windows 10. I upgraded from windows 7 about one and a half month ago. I had many problems all around with multiple BSOD per week.

I took up the opportunity to format my HDDs and did a clean installation of windows 10. I had some problems with BSOD at the start but I followed the instructions provided on this link DISM - Repair Windows 10 Image . There was some corruption that was found and repaired. I even run a memtest with 3 passes for a grand total of 0 errors.
This happened at around the 3rd or 4th of January.

Two weeks passed without the slightest of problems, until yesterday were I had a complete system freeze (had to press the reset button after 15 minutes). Since I didn't get a BSOD I couldn't really research the problem to find a solution , I "ignored" the problem. Tonight I had a BSOD , so I thought about asking for your help with this problem.

My usual routine ( all BSOD seemed to happen when I was doing this) includes having a Mozilla Firefox open with multiple tabs open (like facebook/youtube/mail etc) , skype and usually World of Warcraft. Since my pc is a bit old I have overclocked the cpu to be able to handle the increased punishment.

The first two BSOD I had was with a default set CPU, so I m not sure if this has any impact.

Any help would be greatly appreciated.

I've uploaded the logs through the tool that I found on the sticky post.

WARMACHINE-PC-19-Jan-16__00124_05.zip

Thanks ... Read more

A:BAD_POOL_MEMORY ntoskrnl.exe+142770 AND ntoskrnl.exe+142760

All dumpfiles are network related mentioning of afd.sys, tcpip.sys
2 dumpfiles flagged networx.sys

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd00022b382d0, ffffd00022b38228, 0}
*** WARNING: Unable to verify timestamp for networx.sys
*** ERROR: Module load completed but symbols could not be loaded for networx.sys
Probably caused by : Pool_Corruption ( nt!ExFreePool+bcd )
Followup: Pool_corruption
--
Please update to the latest version of networx
Driver Description: NetWorx
Driver Update Site: http://www.softperfect.com/products/networx/
If this not stops the BSOD, remove/uninstall it.

Read other 0 answers
RELEVANCY SCORE 36.4

Does anyone have any idea what could be causing these BSOD errors? It started with the +74200 error about a month ago (enduser is just now informing IT) and now it is the +73c40. I've already done several Memory tests to no avail. I'm about to just
reimage but don't want to if it's just a driver issue. 

Thanks
TravisD

Read other answers
RELEVANCY SCORE 36.4

Hello,

Recently I got a few bluescreens while playing World of Warcraft, which I thought was very weird, because all of my hardware is pretty new. Here is some info about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

At first, I noticed three bluescreens, then I used EVGA Precision X with a custom aggressive fan profile and the problem went away temporarily, but then the computer crashed later on. I'm not sure if that's relevant or not. I ran a diagnostic on my harddrive and processor, and both were fine. The RAM seems more difficult to test because it said something about usb drives, so I decied to stray away from that unless it was absolutely necessary (and then get help from someone who knows what they're doing!)

I am going to upload the dump files that were saved by bluescreenview. Any help at all would be greatly appreciated!

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

Read other 8 answers
RELEVANCY SCORE 36.4

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

Read other 9 answers
RELEVANCY SCORE 36.4

Can any one advised me

I want to implement network on 6 Floor , 12-12 Port on each portion in one floor, total 24 ports on each floor keeping in mind distance between the each floors how do i connect them with fiber cable (which fiber cable i required) so speed remain constant for all floors.

How is my Idea to implement...right from server room in 1 floor where all internet connection providing to each floor. Cascading from 1 to 2 , 2 to 3, 3 to 4, 4 to 5, 5 to 6. UPon this setup...do i get into a low speed bandwith comparing to 1 floor Network. Does Network Gets slow by connecting through Cat5 UTP cable in cascading example.

Please adviced me.

-Thank Q>
Shiraz
 

A:How Can i Connect Gigabyte Switch to Gitabyte Switch

Read other 15 answers
RELEVANCY SCORE 36.4

i have this sr224 switch and i like to connect it to my giga network sr2024 switch.
now, i plug a utp belden cat5e to port 1 of sr224 and the other end to port 1 of sr2024.
what i got is the whole panel lights of sr224 will blink very fast.
is this normal? or sr224 and sr2024 cannot be paired?

thanks in advance guys
 

Read other answers
RELEVANCY SCORE 36.4

Hi Everyone.....
So, I just got Wireless Broadband hooked up in my business. I hooked the LAN to the Router and then hooked up a 16 port gigabit switch. I have three terminals coming out of it (in the bcak of the building) as well as a line running to the front of the building. At the front of the building I have the line going into another 16 port gigabit switch. I have 4 computer terminals coming out of that switch. I AM getting internet at the back of the building .....but nothing at any of the terminals after the second switch (front of the building). Can someone help?

Thanks!
 

A:Router to Switch to Switch.....No Internet at end terminals

Read other 7 answers
RELEVANCY SCORE 36.4

Hi, guys. I have connected Huawei switch S5700-24TP-SI-AC with Cisco switch 2960 using one single fiber with LX SFP. The port is up on one side (Blinking on Huawei side) and down on Cisco side...Please help.
 

A:Huawei switch vs Cisco switch, How to connect

What kind of 2960 switch do you have? Have you checked the interface to verify the switch recognizes the optic and all the stats report back as normal? Are you using a Cisco branded optic? Do you see light being shot out from the optic in the 2960?
 

Read other 2 answers
RELEVANCY SCORE 36.4

I thought that I had this all figured out, but my dad just asked me a question about my setup, and I can't answer it.

The setup is like this:
[ip-phones + computers]-->[small switch]-->[managed L2 switch]-->[router]-->[modem]

I have several ip-phones and computers grouped into blocks of 8. Each set of 8 is a medley of phones/computers connected to a small switch http://www.linksys.com/servlet/Sate...nksys/Common/VisitorWrapper&lid=3681322279B34

Each of these switches, in turn, will be connected to a managed L2 switch http://www1.ca.dell.com/content/products/productdetails.aspx/pwcnt_3448p?c=ca&cs=calca1&l=en&s=biz that will create 2 VLANS: One VLAN will contain all of the phones, and the other will contain all of the computers. In turn, each VLAN will have its own router and DSL modem, thereby separating the network traffic.

I know that I can use this L2 switch to make the VLANS based on the MAC addresses of the devices. However, the smaller switches do not support 802.1q [VLANs]. Will it be a problem that the smaller switches do not support VLANs? Essentially, will this setup work to split up network traffic?

Thanks once again,
-Roger
 

A:Computer, switch, switch, router, modem

I have the same DELL switch for my phones. You PoE will not carry across the linksys switches, so that is the first problem.
Next are the computers attached to the phones? Or does each device get its own drop?

And whats this about 2 routers and modems? Thats a bit over kill!! QoS would do the trick.

I would run all the devices off the Dell and attach the computers to the Phones (most IP Phones have a passthrough port) Configure the Dell with trunk ports with the Computer VLAN passing untagged traffic making it the native VLAN. While having the phones on a Tagged VLAN(If you phones conig allows you to set the VLAN in its config great! If not you can bind the MAC to the VLAN). The you create a QoS policy giving the VoIP traffic priority!
 

Read other 3 answers
RELEVANCY SCORE 36.4

Hello,

I use windows 7.
When I turn on laptop (acer Aspire 5742) cannot connect to internet until I switch user and log in again. Soon as I touch any browser icon the rest of computer stops responding as well. It's only me on computer. Have virgin media security/ spyware/ virus protection. Tried CCleaner. After I switch user everything is fine.
Additional info; On 16th October had great difficulty getting my emails from Yahoo. Sometimes sign-in box appeared without my security signature and different style of writing for browser remembered log-on details.

Cheers,

Gordon.
 

A:Solved: have to switch user to continue after switch on

Read other 11 answers
RELEVANCY SCORE 35.6

yo guys here is my HJT log can you guys check it and see if there is a problem in my pc i do get the svchost not found whenever i turn on my pc i am new to this virus removal stuff so i really want to be helped out here is the log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:43:14 PM, on 10/13/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16544)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\Windows Defender\MsMpEng.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\ATKKBService.exeC:\WINDOWS\system32\nvsvc32.exeC:\Program Files\CyberLink\Shared Files\RichVideo.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\wscntfy.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\RTHDCPL.EXEC:\WINDOWS\system32\RUNDLL32.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\WINDOWS\vsnpstd3.exeC:\Program Files\Java\jre1.6.0_03\bin\jusched.exeC:\Program Files\CyberLink\PowerDVD\PDVDServ.exeC:\WINDOWS\system32\rundll32.e... Read more

A:Am I Affected?

Can you all pros help me check my log i am not sure if anything is wrong but i got a virus few days ago but i removed it and i have done 3 scans by SB S&D,online NOD32 scan and Ad-Aware scan so please look over it and tell me if there is a prob and how can i fix it or what can be done.... here is the log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 8:15:37 PM, on 10/15/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16544)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\Windows Defender\MsMpEng.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\ATKKBService.exeC:\WINDOWS\system32\nvsvc32.exeC:\Program Files\CyberLink\Shared Files\RichVideo.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\wscntfy.exeC:\WINDOWS\RTHDCPL.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\WINDOWS\vsnpstd3.exeC:\Program Files\Java\jre1.6.0_03\bin\jusched.exeC:\Program Files\CyberLink\PowerDVD�... Read more

Read other 3 answers
RELEVANCY SCORE 35.6

For some reason I have expierienced some errors lately and I just think I'm infected. Can someone please help me?

A:I Think I May Be Affected

What are the errors you are experiencing? Do your anti-virus and anti-spyware scans come up clean?

Read other 11 answers
RELEVANCY SCORE 35.6

Malware C:\ProgramData\Microsoft\Secure\Icons\temp 

A:i am affected please help

i have alrready run the frst program and allready have  a notepad frst and one addiction. what can i do next.pls help

Read other 1 answers
RELEVANCY SCORE 35.6

Logfile of HijackThis v1.99.1Scan saved at 10:58:49, on 09/04/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16414)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Ahead\InCD\InCDsrv.exeC:\Program Files\Common Files\Symantec Shared\ccSetMgr.exeC:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exeC:\Program Files\Common Files\Symantec Shared\ccProxy.exeC:\Program Files\Common Files\Symantec Shared\SNDSrvc.exeC:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exeC:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exeC:\WINDOWS\system32\spoolsv.exeC:\PROGRA~1\COMMON~1\AOL\ACS\AOLacsd.exeC:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exeC:\WINDOWS\eHome\ehRecvr.exeC:\WINDOWS\eHome\ehSched.exeC:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXEC:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exeC:\WINDOWS\system32\nvsvc32.exeC:\... Read more

A:Am I Affected

Hello JJSSJ and welcome to the BC HijackThis forum. I see no signs of viruses or malware in the log. It is claen.The only thing I do see is that the java version installed is quite out of date and should be updated.Updating Java:Note: If there is an Update XX in the name then the "XX" in the version will be whatever the latest version is.Download the latest version of Java Runtime Environment (JRE) 6.0 Update XX (if present).Scroll down to where it says "The J2SE Runtime Environment (JRE) allows end-users to run Java applications".Click the "Download" button to the right.Check the box that says: "Accept License Agreement".The page will refresh.Click on the link to download Windows Offline Installation with or without Multi-language and save to your desktop.Close any programs you may have running - especially your web browser.Go to Start > Control Panel double-click on Add/Remove programs and remove all older versions of Java.Check any item with Java Runtime Environment (JRE or J2SE) in the name.Click the Remove or Change/Remove button.Repeat as many times as necessary to remove each Java versions.Reboot your computer once all Java components are removed.Then from your desktop double-click on jre-1_6_0_XX-windowsi586-p.exe to install the newest version.Cheers.OT

Read other 1 answers
RELEVANCY SCORE 35.6

Please check it out for me D: I think i might have vitro. well maybe
Im also trying to play a Game but it keeps giving me a rundll32.exe application error.
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\Logitech\GamePanel Software\LgDevAgt.exe
C:\Program Files\Logitech\GamePanel Software\LCD Manager\LCDMon.exe
C:\Program Files\Logitech\GamePanel Software\G-series Software\LGDCore.exe
C:\Program Files\Alwil Software\Avast4\ashDisp.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\IObit\IObit Security 360\IS360tray.exe
C:\WINDOWS\system32\LVCOMSX.EXE
C:\Program Files\Logitech\Video\CameraAssistant.exe
C:\WINDOWS\system32\ElkCtrl.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\common files\logitech\lvmvfm\LVPrcSrv.exe
C:\Program Files\Logitech\GamePanel Software\Applets\LCDCountdown.exe
C:\Program Files\Logitech\GamePanel Software\Applets\LCDMedia.exe
C:\Program Files\Logitech\GamePanel Software\Apple... Read more

Read other answers
RELEVANCY SCORE 35.6

Hi,I think I am affected with some kind of virus, but not sure exactly what. Suspicious points to look at.-Had some kind of accesss intrusion in my Spybot TeaTimer, when I was trying to shut down my computer, everytime I clicked something, it re-appeared. Precursor to this I blocked the change Spybot was detecting with AOL Fast Start Up earlier wasn't sure what it was so I stopped it.-Hosts have changed according to AVG, but doesn't list anything as infection.-Can't download Microsoft Windows updates, saying I am not the administrator when it is clearly the case.-Errors when trying to scan in Trendmicro, says file can't be delivered.-Generally computer is still pretty fast, but shutting down takes a lot longer, and slight time when starting up.-Windows defender randomly showed up a couple of weeks, back, whenever I used a spyware scanner, it scanned aswell according to the temporary internet files in CCleaner, until I stopped it.-Quite a few times the internet connection would break down and I'd have to reconnect, frequency reduced a lot when I got Spybot.-Taskeng.exe and explorer.exe asked for access to the internet according to my Zonealarm Firewall, I stopped both. Help would be greatly appreciated, I know you guys must be really busy, I hope you can find some time for me. Here's my log;Logfile of Trend Micro HijackThis v2.0.2Scan saved at 18:37:44, on 22/01/2008Platform: Windows Vista (WinNT 6.00.1904)MSIE: Internet Explorer v7.00 (7.00.6000.16575)Boot mode: NormalRunni... Read more

A:Think I Am Affected, But Not Sure Exactly How..

Hello Yosho and welcome to BleepingComputer!Apollogies for the delay. The forum has been very busy lately. If you are still having problems please post a brand new HijackThis log as a reply to this topic. Before posting the log, please make sure you follow all the steps found in this topic: Preparation Guide For Use Before Posting A Hijackthis Log.Thanks,Johannes

Read other 11 answers