Over 1 million tech questions and answers.

Error Code 80070017 when trying to install updates after a clean install.

Q: Error Code 80070017 when trying to install updates after a clean install.

Trying to install Windows Vista Service Pack 1 (KB936330) , but whenever I try to install it, the error code 80070017 appears saying the update has failed. I have numerous times to install it and it still won't allow me to install the update.

RELEVANCY SCORE 200
Preferred Solution: Error Code 80070017 when trying to install updates after a clean install.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Error Code 80070017 when trying to install updates after a clean install.

Have you allowed Windows Update to run automatically to get all the previous updates? it should follow on to install SP1 automatically without intervention.

Read other 1 answers
RELEVANCY SCORE 88

Suddenly Windows 7 has stopped installing Windows Updates. It downloads, then creates restore point, starts installation, but then comes back with the error code 800F0900. This happens with all the updates when carried out individually, critical or optional. I first went through the process of clearing all the Start-up Programs in the Services section of msconfig. As that did not solve it I then stopped all but MS services, and that did not solve it.  I tried the Microsoft .NET Setup Verification Tool. This said there were problems that it could not fix and sent a report to Microsoft.  Following an earlier thread on this site, I installed and used the Windows Repair program from Tweeking.com. This failed to solve the problem. Does any one have any other possible advice to help solve this problem ?

A:Windows Updates will not install. Error code 800F0900 for all updates.

I would try running the System Update Readiness Tool:  http://www.microsoft.com/en-us/download/details.aspx?id=20858 .
 
Louis

Read other 3 answers
RELEVANCY SCORE 86

Hello,

I recently bought W8 Pro with Media Center. As always, after installing all my programs I wanted to update my OS. All updates went smooth except specific two:

-KB2770917
-KB2785094
Also, while trying to install them, I have error 0x80073712.

What can I do? I tried to maually install them, but with same result.

A:Error code and 2 updates won't install

Hello

Welcome to the forums. Have a look here... Windows Update error 0x80073712 - Microsoft Windows Help

Read other 3 answers
RELEVANCY SCORE 85.6

Dear guru's,

Since installing 100+ updates at once on a fresh Windows 7 Home Premium x64 install (Toshiba Image), I'm stuck with error 800B0100. I've tried running the SUR tool multiple times, and have runned the SFC /scannow command. And I've tried the MS Fix It. But to no avail. SP1 is already installed, so that isn't the problem in this case.

I hope a (CheckSUR) Expert can help me with this problem.

I included the entire CBS folder (2 part RAR) in the attachment.

A:Error 800B0100 after 100+ updates (Clean install)

Here's the errors from the CheckSUR tool...

Code:
Unavailable repair files:
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~de-DE~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~de-DE~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~en-US~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~en-US~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~fr-FR~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~fr-FR~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~it-IT~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~it-IT~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~nl-NL~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~nl-NL~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-MiniLP~31bf3856ad364e35~amd64~de-DE~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-MiniLP~31bf3856ad364e35~amd64~de-DE~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-MiniLP~31bf3856... Read more

Read other 9 answers
RELEVANCY SCORE 85.6

Hi i am trying to help my friend out he bought his son a emachines em350 netbook with windows 7 installed. For some reason it got messesd up and he tried to do a system restore. Since then when you try to boot up its saying input a password to unlock the harddrive which we dont know. After you input wrong code 3 times you get option to continue which takes you to black screen saying no bootable device detected press any key to continue. Next i tried to do clean install with windows 7 from a usb this goes fine untill it asks for missing cd/dvd driver i have found away round this which is to select cancel then when back on install now screen swap the usb to another port and continue. This works so i select terms and so on then get to part where it asks where to install windows now i have formated and made a active partition on the hard drive but when i try to click next i get error code 0x8007045d this is where im stuck. I have also tried anothe r hard drive and i get the same thing any ideas anyone. Thank you in advarnce.

A:Windows 7 error code 0x8007045d during clean install.

The HD may be damaged, do you have anyway to do an HD test from anything that came with Acer? Like a diagnostic cd?

Second, what is this password that it is prompting? Was the netbook's HD encrypted or is it a BIOS password of some sort?

Third, the problem may be the Win 7 installation on your usb stick.. perhaps from a bad ISO. Try to re-make it.

Read other 9 answers
RELEVANCY SCORE 85.6

i had pop ups appering on my computer and clean it with Spybot and AVG, after the pop ups stopped. my friend told me to install malwarebyte, because its really good in its opinion.when i tryied to install it. it failed and an error appear like that.
C:\Program Files/Malwarebytes' Anti-Malware\mbamext.dll

Unable to register the DLL/OCX: CreateProcess failed; code 2
can anyone help me on that one please. i got an hijackthis log as well

************************

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:43:14 PM, on 1/13/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Analog Devices\Core\smax4pnp.exe
C:\Program Files\Analog Devices\SoundMAX\Smax4.exe
C:\Program Files\Nero\Nero 7\InCD\NBHGui.exe
C:\Program Files\CyberLink\PowerDVD\PDVDServ.exe
C:\Program Files\lg_fwupdate\fwupdate.exe
C:\Program Files\Nero\Nero 7\InCD\InCD.exe
C:\Program Files\Logitech\GamePanel Software\LCD Manager\LCDMon.exe
C:\Program Files\Logitech\GamePanel Software\G-series Software\LGDCore.exe
C:\Program Files\ATI Technologies\ATI.... Read more

Read other answers
RELEVANCY SCORE 85.6

I've spent the whole of today and yesterday trying to install windows 10 onto my SSD, it's not partitioned as i have read from various sites that the installation software will you all of that but everytime it get to the step after copying the files over i get the error 0x8007025D and nothing i've found online has worked.

A:failed during clean install Error Code 0x8007025D

I am having same exact problem??

Read other 14 answers
RELEVANCY SCORE 85.2

I've tried several times to install WIndows Vista updates when Prompted and 3 times now I've gotten an error message. I tried it while disabling Norton and that didn't work, and I tried downloading updates directly from Microsoft's website, same error message. Is this fixable? Here's a picture of my error message.
 

A:Can't Install Vista Updates - Error code 646

Read other 12 answers
RELEVANCY SCORE 85.2

Windows standalone update installer does not work...I get error code: 0xc8000247 that says the "installer encountered and error"...When I click on update in the action center I get a message saying "Windows Update cannot check for updates because the service isn't running"...I have checked the service utility and both the update and installer are running...I have tried stopping and then restarting them...Still nothing...I can't run update troubleshooter...I get error code: 0X8E5E0247 that says "A problem is preventing the troubleshooter from starting"...Below is system info...

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4500 @ 2.30GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4056 Mb
Graphics Card: Mobile Intel(R) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1), 1804 Mb
Hard Drives: C: Total - 953766 MB, Free - 921214 MB;
Motherboard: Dell Inc., 0G848F
Antivirus: AVG AntiVirus Free Edition, Updated and Enabled
 

A:Can't install updates...error code 0xc8000247

Is this the same issue as your other topic? If so, you should likely continue in the same topic.
 

Read other 1 answers
RELEVANCY SCORE 85.2

Hi

I have several updates(currently 3 but it was 5 last time I tried) that fail.
They seem to download alright, but on installation the progress bar takes a few leaps
to the end, and it's all fails. I stopped updating for a week or so, and today, I was able
to successfully apply 14 out of the 17 updates that were available. So now it's just these
3 for some reason.

Those are:

Important updates
Update for Windows 7 for x64-based System(KB3040272)
Update for Windows 7 for x64-based System(KB3065979)
Optional
Update for Windows 7 for x64-based System(KB3064209)


Here's the info:
OS is Windows 7 Home premium(64bit)
The error code I am given is: 8024200D
I have downloaded and run the SURT tool.
I have also several times run the sfc /scannow cmd.
I repeatedly tried to update at every stage, with no luck.
The CBS.zip is attached.

Running the automatic troubleshooter from the microsoft site reports the following
as a Windows update error and says it couldn't fix it:

InformationalError Report
RootCause: RC_DataStore
ErrorCode: 0x800F081F

As you can see, the error code there is a different one than the one I get directly from
the failed Windows update.

Any help/suggestions much appreciated.

A:Some updates won't install Error Code: 8024200D

I searched for the updates in question online, and downloaded and installed them manually. I then checked for new updates(after a reboot), and windows update successfully downloaded and installed all by itself. It seems my troubles are a thing of yesterday. Hooray! Still though, I don't get why this happened in the first place ... oh well.

Read other 1 answers
RELEVANCY SCORE 85.2

I have a Windows 7 ultimate 64-bit SP1 Laptop. Updates KB2957689 and KB2800095 fail to install every time I try and I get error 80070570. I tried scanning it with malwarebytes and installing updates one at a time but it doesn't work.

A:Error code 80070570; updates won't install.

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 1 answers
RELEVANCY SCORE 84

Hi all

I am new to the forum. Nice to meet you all

I need to some help that I have put off since last month due to personal life stuff outside of Windows 7. I notice windows update is failing bad installing three updates. Two of those was last month and one very new update a few days ago.

I read the rules about posting and one things it mentions in the post was to post up the CBS log file buts it over 1gb and it wont open it even when zipped. I did ran sfc last month but it didnt pick up anything. Enabling and disabling windows updated trigger anything to work. I havent uninstalled SP1 yet but how safe is this?

My OS is: Windows 7 pro SP1 64bit.


The three updates are:

Security Update for Windows 7 for x64-based Systems (KB3126587)

Security Update for Windows 7 for x64-based Systems (KB3126593)

Security Update for Windows 7 for x64-based Systems (KB3140410)


And they all have the same error code: 80073701. I did find a standalone installer for KB3126587 but the error message I keep getting when I run it is: "The update is not applicable to your system". Even though it damn well is the correct version.
Any directions on where to go from here? I feel like I have run out of options

A:Cant install new windows updates error Code 80073701

Hi Mallett,
OK lets go with what we can get. you said that sfc was fine last month.
Can you post the windows update log from the last sfc rundate
Run the SURT from here
Download System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [October 2014] from Official Microsoft Download Center
and for good measure
http://go.microsoft.com/fwlink/?LinkID=52012.

Roy

Read other 1 answers
RELEVANCY SCORE 84

I posted this yesterday, but as this was my first post in the Windows 7 forum, I was instructed that I did not include all of the required information. I closed the old post and am re-posting with all of the required documentation.
=================================
Since mid February, all of my Windows update patches have continually failed with an error code of 80070308. I have never had an issue with any Windows Updates prior to mid February. I am running Windows 7 Professional SP1 64 bit. I have a newer Dell XPS8500 machine with 32 GB RAM and an Intel Core i7-3770 CPU @ 3.4 GHZ. The following updates continually fail:

Cumulative Security Updated for IE 11 for Windows 7 x64 based systems (KB2909921)
Security Update for Internet Explorer 11 for Windows 7 for x64-based Systems (KB2909210)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1
for x64-based Systems (KB2898857)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for
x64-based Systems (KB2901112)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for
x64-based Systems (KB2911501)
Security Update for Windows 7 for x64-based Systems (KB2912390)
Security Update for Windows 7 for x64-based Systems (KB2916036)
Update for Windows 7 for x64-based Systems (KB2843630)
Update for Windows 7 for x64-based Systems (KB2919469)

I tried running the "Fix it" program recommended in the MS ... Read more

A:Cannot install Windows Updates - get error code 80070308

I had trouble putting the CBS logs in my original post so I am adding them in this reply.

Read other 3 answers
RELEVANCY SCORE 84

I just got a new Dell Inspirion laptop with Windows 7 Home Premium Service pack 2. As usual there were several Windows Security updates that needed to be installed. Took two days to install them all. Or I thought all had installed. But after Secunia PSI kept insisting that no updates were installed, I checked the update history and found several had failed to install. All have the same Error code of 800F0902
 
I ran Microsoft Fixit tool, which said it detected no problems. But obviously that too failed.
 
The list of updates that failed are too numerous to report but here a few:
 
KB2909210
 
KB2656356
 
KB2789645
 
KB2756921
 
Most seemed to have to do with the Net Framework 3.5.1.
 
Does anyone have a clue how I can resolves this? Most importantly is my new Dell a lemon?
 
Thank for your time,
 
 

A:Windows updates will not install error code 800F0902

Have you tried installing them 1-by-1; re-booting after each?I'm not sure why .NET 3.5.1 is trying to install when .NET 4.5 is the current version.

Read other 6 answers
RELEVANCY SCORE 84

I have been unable to install Windows updates since mid-December, and now have some 11 outstanding.

My machine is a 5 year old Acer Aspire M3910 64 bit Intel Core i3 CPU 540 @3.07GHz with 8GB RAM running Windows 7 Home Premium SP1.

I have downloaded and installed the System Update Readiness Tool from the Microsoft site. However the CBS.zip file generated from the CBS file produced by running this tool is some 12 MB in size and falls foul of the 8MB limit imposed by the forum, and I cannot attach it. How do I get over this?

I have also run SFC /SCANNOW, but it identified no issues.

Help to resolve this updating error would be very much appreciated.

Thank you in advance!

Read other answers
RELEVANCY SCORE 84

Hey all,

Been running into this issue the last few days and my search has brought me here:
CheckSur

Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-06-07 10:59

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_1_for_KB3042553~31bf3856ad364e35~amd64~~6.1.1.1.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_1_for_KB3042553~31bf3856ad364e35~amd64~~6.1.1.1.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_2_for_KB3046306~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB3046306~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_2_for_KB3046482~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB3046482~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_3_for_KB3046306~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_3_for_KB3046306~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB3042553_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB3042553_SP1~31bf3... Read more

A:Unable to install updates, Error Code 800B0100

I've uploaded a file - cpyaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder cpyaa in the same place.
Open this folder - there should be two folders inside it (Manifests, and Packages)

Copy the content of the Packages folder to the folder
C:\Windows\Temp\CheckSur\Servicing\Packages

And the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.

... as far as the Windows 10 notification is concerned, I don't think it's related, but it's possible.

Read other 9 answers
RELEVANCY SCORE 84

G'day guys. As the title says I've been getting an 80073712 error while trying to install some updates.

Updates and errors:
Important:
Update for Windows 7 for x64-based Systems (KB3068708). Published 9/06/2015

Optional:
Update for Windows 7 for x64-based Systems (KB2574819). Published 10/09/2013
Update for Windows 7 for x64-based Systems (KB2592687). Published 10/09/2013
Update for Windows 7 for x64-based Systems (KB2830477). Published 11/02/2014

Logs:
Attached as well as the C:\Windows\windowsudpate.log file

Additional info:

These files have been turning up in my external hard drive while I try to do the updates. At first I didn't know what they were but after some searching it turned out that they were just where the downloaded updates were stored. May or may not be relevant. Tried doing an update with the hard drive unplugged through the System and Security/Windows Update interface and it still failed.

I also tried to download and install the KB3068708 important update manually from the microsoft website but when I tried to install it it said something along the lines of "Update not applicable to your computer".

A:Error Code 80073712 while trying to install windows updates

CheckSUR shows this...

Code:
Summary:
Seconds executed: 1497
Found 6 errors
CSI Manifest Missing Total count: 3
CSI Payload File Missing Total count: 2
CBS MUM Missing Total count: 1
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-security-schannel_31bf3856ad364e35_6.1.7601.18779_none_80005f6b6c0e9b4a.manifest
winsxs\manifests\amd64_microsoft-windows-security-ntlm_31bf3856ad364e35_6.1.7601.18779_none_da9d0130795687a1.manifest
winsxs\manifests\amd64_microsoft-windows-security-ntlm_31bf3856ad364e35_6.1.7601.22983_none_db15ce399281a879.manifest
servicing\packages\Package_for_KB3003743~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB3003743~31bf3856ad364e35~amd64~~6.1.1.1.cat
First priority is the listed files - we'll worry about the others later.

I'll post a fix protocol when I can clear the backlog. !

Read other 5 answers
RELEVANCY SCORE 84

I am having an issue installing Windows Updates (WU) all have Error Code: 80070005.

Nine updates installed after several tries, but there are about 50 updates waiting to be downloaded and installed.

I ran the SURT, but it kept spinning...all day, so I canceled it. Tried running it again, but it wouldn't let me run it again.

I ran the SFC Scan and have the SFC detail log attached. Appears a lot of files were repaired and some could not be repaired. The files that couldn't be repaired are mostly sample MS music, pictures, etc. Stuff I am not interested in.

Maybe one of my cleaners deleted same as a useless/unused file or maybe a virus corrupted some files? I didn't see anything in the SFC detail log pertaining to WU?

The CBS compressed zip log is 13.6MB, which is over the 8MB upload limit, so couldn't upload it?

On June 23, 2016, MSSE picked up a Rogue: JS/FakeCall.D labeled (Severe). It was quarantined by MSSE, I deleted it.

Malwarebytes this past week picked up and quarantined a few rootkits labeled as severe or a threat. I deleted those. Not sure if these items affected WU or not?

Would the Windows Update - Reset tutorial would work to fix my WU issue here? Seems like a uncomplicated fix?

So any help here would be appreciated, Thanks!

A:Windows Updates won't install, Error Code: 80070005

Hi Vista32,
Thats not good reading.
Most system security experts would advise a complete RE-install of any OS compromised by a Rootkit, but you, from your own admission, have had few.
Iam NOT a security expert but in this case I WOULD, if you can identify them, look them up at BleepingComputers they have an excellent catalogue of Rootkits and there impact/removal.
Just removing them does NOT allways guarentee a clean system.

Having said that SFC has done a pretty good job of repairing some of whats been infected/changed, but it is advised to run it 3x.
From what i can see there are certainly still some errors, in Windows media player, and there are likely to be others
SURT can take >>hours<< to run especially on a previously infected system, as it also makes repairs as it goes along

You can run the troublshooter, if you want.

Roy

Read other 6 answers
RELEVANCY SCORE 84

Hi,

Since 10/07/2014 I am having serious problems with 9 updates in Windows Update.
I just took a look at some other topics in this forum section and it seems I am not the only one having these problems.

I've already tried several things i've found on the internet, but nothing really nothing worked out for me.
I've tried the hotfix, didn't work out; i've tried multiple CMD commands, didn't work out; i've tried to rename the catroot2 folder, didn't work out either...

Is this problem common? Because most of the updates are important; so i'd like them to be installed and they keep on failing every day since then.

If I need to post or upload something, please tell me, because i'm not a computer expert ;-)

Thanks in advantage,
Blizzard9041

A:Failed to install 9 updates: Error Code 80070308

Please open an elevated Command Prompt, and run the following command,

REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG QUERY HKLM\COMPONENTS


post the results.


Here are some instructions to make life easier

1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.

Read other 5 answers
RELEVANCY SCORE 84

Good Afternoon,

I am also having problems installing updates with the error code 80070308.

I have spent this afternoon reading the other posts and following the Windows Update Posting Instructions thread so hopefully I've gathered has much info as I can.

I downloaded and ran the System Update Readiness Tool. Once the installation was complete I tried to reinstall the updates. This resulted in the successful installation of: Hotfix for Windows (KB947821) but the failed installation of the other 9 updates as before.

Attachment 325390

And I received the following error code.

Attachment 325391

I then carried out the sfc/scannow which all came back OK.

Attachment 325392

I have saved the logs as a zip file but its too big for me to upload (12.5MB)? Any suggestions?

I hope I have not missed anything out. But please bear with me if I have.

Any help/advice would be appreciated.

Thanks in advance.

Kerry

A:Failed to install updates: Error Code 80070308

This is becoming a common problem with the latest batch of updates - MS are looking into it (we are led to understand)
I'll add this thread to the action-list for our contact.

Read other 7 answers
RELEVANCY SCORE 84

Got a BSOD after a clean install of windows 7 and installed some windows updates.
The Norton Anti virus was also uninstallled

Windows 7 Home premium on HP 630 bought in June 2011. 4GB memory, 2.13 Hz , 284 GB, 64bit

A:BSOD after clean install and windows updates error 0x0000003B

  
Quote: Originally Posted by chakri99


Got a BSOD after a clean install of windows 7 and installed some windows updates.
The Norton Anti virus was also uninstallled

Windows 7 Home premium on HP 630 bought in June 2011. 4GB memory, 2.13 Hz , 284 GB, 64bit



It is much easier to find patterns, etc, when there are more than one crash. We prefer you wait until you have at least two so that if one is corrupt the other probably wont be.
With that said your single crash appears to be caused by a memory exception (probably a driver). Please run these two test to verify your ram and find which driver is at fault.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell... Read more

Read other 1 answers
RELEVANCY SCORE 84

Hi all,
Just inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really common
Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation.
Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!
After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc. Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again. Anyone who can solve this for me, I be tempted to send you a box of chocs no matter wher... Read more

A:troubles installing windows (clean install) - error code 0x80070017

Is it possible your computer or mobo maker has a newer BIOS update for handling larger HD's? If not reset BIOS to defaults: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS,

While in BIOS setup set SATA controller to AHCI to try install

Wipe the HD with Diskpart Clean Command then follow Step 2.2 here to format a smaller install partition and mark Active: SSD - HDD Optimize for Windows Reinstallation.

Unplug all other HD's and peripherals.

Next remove all but 2gb RAM to try install. Test your RAM - Test with Memtest86+. Then swap sticks to try install again.

Read other 1 answers
RELEVANCY SCORE 83.6

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

Read other 1 answers
RELEVANCY SCORE 83.2

I have 8 important & 4 optional Windows which I cannot install. I have tried everything people have suggested to no avail. The code Numbers are: Important KB2871997, 3004375, 3033929, 3057154, 3060716, 3061518, 3068708, 3071756. Optional KB2574819, 2592687, 2830477, 3080149. KB2592687 was installed, but it kept trying to install so I uninstalled it.
findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt"

A:Unable to install 11 Windows Updates because of error Code 80070490.

Hello Asanberger1960,

Please follow the Windows Update Posting Instructions and post the requested data.

Thanks,
John

Read other 3 answers
RELEVANCY SCORE 83.2

Hello,

For the last couple of months I have been unable to install updates on Windows 7. I try to look for updates but it gives me this error:

(It's dutch but you get the idea)

I searched the code on google and most results told me to sync my time. My time is correct, yet I still get the same error code everytime.

Is there anyone who can help me with this?

A:Unable to install updates on Windows 7 [Error code 80072F8F]

In the Control Panel, is your time zone correct? If you have DST is that set properly?

Read other 1 answers
RELEVANCY SCORE 83.2

Hi All

since a few days, my PC won't install 4 windows updates:
KB2993651
KB2962409
KB2975719
KB2990967

I investigated a bit on my side, and the last sucessful update was in june this year, i have the error code 0x80073712 since the 25/09/2014 in the events journal
When I found out about the issue yesterday, i tried:
1. WindowsUpdateDiagnostic.diagcab which fixes issues, but then windows update still raises the same error code
2. after reading thread from Chuckylena i also tried the command "DISM.exe /Online /Cleanup-image /RestoreHealth" but the error below is raised (my system is in french)

Code:
C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth
Outil Gestion et maintenance des images de d?ploiement
Version : 6.3.9600.17031
Version de l'image : 6.3.9600.17031
[==========================100.0%==========================]
Erreur : 14098
Le magasin de composants a ?t? endommag?.
Le fichier journal DISM se trouve ? l'emplacement C:\Windows\Logs\DISM\dism.log


I'm attaching the dism log :
https://www.dropbox.com/s/1nnmjn5aa8tevl3/dism.log?dl=0

If someone could kindly have a look I'd appreciate it

A:Unable to install 4 windows updates error code 80073712

Did you run this first

Use the System File Checker tool to repair damaged Windows files. To do this, follow these steps:
Open an elevated command prompt.Run the "sfc /scannow" command.Try to install update again.

Read other 8 answers
RELEVANCY SCORE 83.2

I keep getting this error, and following Error message when you try to install a Windows update, a hotfix, or a service pack after you perform System Restore in Windows Vista: "0x80071A91" and removing files manually did not resolve the problem.


Code:

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-B9Y6B-HC4GB-PCKGW
Windows Product Key Hash: Z1GlPcYy+HBohewZJAy1bI8JXYg=
Windows Product ID: 00426-066-9124496-86422
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {8ACB14DD-15BC-4695-AEC7-A2E6183B4DFA}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed By: Microsoft
Product Name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.120830-0333
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OG... Read more

A:Unable to install Windows Updates, error code 80071A91

Hi - welcome to the forums!

Hmmm - Invalid Class error - that's a VERY rare error in your MGADiag report.....
It appears to be caused by a broken WMI store.

Please run the following commands,


Net stop winmgmt /y
Net stop wscsvc
MD c:\wmibackup
DIR %systemroot%\System32\Wbem\Repository
MOVE %systemroot%\System32\Wbem\Repository\*.* c:\wmibackup
DIR %systemroot%\System32\Wbem\Repository
NET start wscsvc
Net start winmgmt
Net start iphlpsvc


WAIT 10 minutes for the store to rebuild, then reboot.

wait another 10 minutes (just in case), then run another MGADiag report.


By the way, how did you acquire your Windows license? - it's an MSDN-type one, and is not for general sale.

Read other 5 answers
RELEVANCY SCORE 82.8

I don't know why but my computer now has a partition and the C: drive only has 6.83 GB and the D: has 71 GB. I've tried deleting the D: in Disk Management, but it will not allow me. When I right click on the D: drive the Volume Delete is in grey. So I wanted to try and reinstall Windows Vista (Clean Install), but I'm getting an error:

Error Code: 0x80070070 - The System Partition does not have enough space.

What can I do?
 

A:Clean Install with Vista - Error Code: Ox80070070 - System Partition no space

Read other 6 answers
RELEVANCY SCORE 82.8

Tried this and got it to work twice...after many failed attempts using other methods. Hopefully helps somebody else out.
1. Upgraded computer, had to install OS on blank drive
2. Installed vista sp2, during setup said to not enable automatic updates
3. Went into Vista Updates and let it update twice (first time I think had some updates pre-installed from the sp, second time was for the update client update)...this is typically the point where windows update would just get stuck
4. Restarted computer
5. Used program WSUS offline updater, http://download.wsusoffline.net/
6. In WSUS Offline Update program, went under legacy products, checked my version of windows vista, picked all the check boxes under "options" then clicked "start"
7. After it did its thing, went into client folder and clicked UpdateInstaller and ran it with the options I wanted installed
8. Restarted whenever it asked, and it installed all the updates! There was one step that said it would take a while, and it took a little while (didnt watch but was under 1 hour)
The first time I tried WSUS offline update it didnt work, so I am not sure if step 3 is necessary or not, but it was the only difference between the times I tried it when it worked and didnt work, may have just been coincidence. Dont think WSUS offline update does anything with drivers, but around 180 updates installed.
Thanks to the creators of WSUS Offline Update
 
 
edit: Just ran windows update while typing this thread and now it works ... Read more

A:How I got clean install of Vista Ultimate SP2 to install updates...

Hi vista134:
 
Thank you for that feedback.  Other users have posted questions about how to use the WSUS Offline Updater to update Vista SP2 (see GaryC's post in the AskWoody.com thread How to update Vista quickly? for one example) so your comments will be very helpful.  It sounds like many users are getting stuck at your step # 7 and aren't sure how to run UpdateInstaller.exe to start the actual installation.
------------32-bit Vista Home Premium SP2 * Firefox v50.1.0 * NIS v22.8.1.14 * MBAM Premium v2.2.1

Read other 4 answers
RELEVANCY SCORE 82

I have updates that need to be installed (KB974469) and (KB951847) and I have been trying for weeks (or longer to install them). Every time I try I get a message saying install failed error(s) found: Code 80070017 Windows Update encountered an unknown error. I am using Windows Vista and I have an Acer Aspire 4520 laptop. Thanks for any help on this subject.
 

A:Error code 80070017

Read other 16 answers
RELEVANCY SCORE 82

I'm getting error code: 0x80070017 during extracting files, which is:
Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart installation.

I connect this hard disk to my friends computer and it detect on it computer and i format it totally.Now there is no OS in my hard disk.After i try to install windows 7 i get above error again and again.

plz help me.

A:error code 0*80070017

Where did you get the Windows 7 Install DVD? Sounds like it may be defective. You can download a legal copy from here: Download Windows 7 ISO (Official 32-bit and 64-bit Direct Download Links) ? My Digital Life

Make sure you get the same version you have, Home Premium, Pro or Ultimate and 32 or 64 bit.

I would recommend using ImgBurn at 4X speed (or the slowest available) to create the DVD from the downloaded .iso file.

Good install tutorial here: Clean Install Windows 7

Read other 3 answers
RELEVANCY SCORE 82

Hi,
Hope someone can help. I'm trying to install SP2 for Windows Vista on my Toshiba laptop, but keep getting the following error message; error code 80070017.

Does anyone know of an easy solution to this please?
Thanks,

WILSON99.
 

Read other answers
RELEVANCY SCORE 80.8

My laptop keeps "saying" I have an important update to install - Windows Vista Service Pack 1 (KB936330) , but whenever I try to install it, the error code 80070017 appears saying the update has failed and would I like to try again. I have "tried it again" around 5 times and it still won't allow me to install the update even when I'm not running any other programs as it recommends. If you can could you please advise me on what to do. Thank You EmeraldLily
 

A:Solved: Error code 80070017 ?

I to have had the same error code, and the manufacture of the lap top wont help wit out a fee, (warrenty issue)
 

Read other 3 answers
RELEVANCY SCORE 80

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3890 Mb
Graphics Card: Intel(R) HD Graphics, 1721 Mb
Hard Drives: C: Total - 152621 MB, Free - 123904 MB; D: Total - 152221 MB, Free - 130594 MB;
Motherboard: TOSHIBA, PWWAA
Antivirus: avast! Antivirus, Updated and Enabled

for got to add that i'm getting error code 80070017 when trying to updat and don't know why my laptop is extremely slow, been having problems with laptop since i got it over a year ago. been put to factory settings so many times just need help i don't go mad with my laptop jus need it for job hunting...please help i hope this error will eventually fix my laptop
 

A:Solved: windows error code 80070017

Read other 8 answers
RELEVANCY SCORE 79.2

I was given an HP Compaq Presario C500 that was headed for the garbage because it would not connect to the internet. After running several scans ESET online scanner came up clean. Installed Microsoft Security Essentials and installed SP1, and can't get it to install SP2. I keep getting error code 80070017 / Windows Update encountered an unknown error.

I would prefer to reformat but Recovery Manager restarts back into Windows and I have no disks.

Can provide a long list of what has been done if needed including WU Modules (Normal Mode) and WU Components fixes. Permissions point in every which way but the correct way!

Any help would be much appreciated!

Free space is presently @ 42.3 GB of 68.9 GB on C: Drive (started out with 7.3 GB's free space! )
and 4.91 GB free of 5.53 GB on Presario_RP (D)

Specs as follows:
Vista Home Basic
Intel (R) Celeron (R) MCPU
[email protected] 1.60GHz 1.60 GHz
512 MB RAM
32-bit OS
Denied access to the CBS folder itself though can access CheckSUR.log which I am including along with sfcdetails.

=================================
Checking System Update Readiness.
Binary Version 6.0.6001.22375
Package Version 5.0
2010-10-04 19:57

Checking Deployment Packages

Checking Package Manifests and catalogs.

Checking package watchlist.

Checking component watchlist.

Checking packages.

Checking component store
Summary:
Seconds executed: 2478
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.224... Read more

A:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Dow... Read more

Read other 49 answers
RELEVANCY SCORE 78.4

Hi,

I just did a clean install of Windows 7 Home Premium x64. I've been running through all the updates, and most have installed just fine, but a few won't complete.

Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211)
Security Update for Windows 7 for x64-based Systems (KB3023562)
Update for Windows 7 for x64-based Systems (KB2761217)

I've tried restarting and re-running update several times, but no luck. I've run the Update diagnostic tool and the system update readiness tool, but that hasn't helped either. I've also tried manually installing these updates, but I get the message "The update is not applicable to your system"

The diagnostic tool gives these messages:
Windows Update error 0x80070057(2015-02-11-T-08_58_26A) Not Fixed
Problems installing recent updates Not Fixed
Cryptographic service components are not registered Not Fixed
Service registration is missing or corrupt Fixed

One other thing to note, this is the second clean install that I have done. I did an install the other day and had this same issue come up. After trying for a while to fix it, I decided to just re-install again and see if that would help. It hasn't, but interestingly the updates that are failing are different this time.

I've attached my CheckSUR.log files, but it doesn't seem to do any good to me.

Thanks for your help

A:Some Updates on Clean Install Won't Install

Those Updates may not even be needed. I would give it time with Updates set to Automatic for it to sort itself out.

Be sure to also install all Optional Updates as there may be some precursor Updates there, too, and sometimes there are vital patches and drivers queued there.

Read other 2 answers
RELEVANCY SCORE 77.2

Hey guys!

I have a new ASUS ROG G751JT-DH72 laptop, and I have been trying to install Windows 10 and Ubuntu on it. It came with Windows 8.1, so I upgraded to 10, then did a clean install of 10. Version was Home 64 bit.

That went reasonably well: only thing after the clean re-install was that on boot, the screen did nothing but flash on and off. I found out that I could get it unstuck by mashing F12, and that disabling fast boot fixes the problem permanently. My cleanly installed fresh Windows 10 worked perfectly.

I then installed Ubuntu 15.04 in the small space that I had left for it on the SSD, and gave it the whole 1 TB drive for my "home" folder.

Afterwards, Windows was gone. Mind you, the bootloader still showed up in the Grub menu, but when I tried to launch it, it told me something was wrong and I had to recover it. I tried, but couldn't: bootrec /scanos told me it found no Windows installations.

So I figured: second attempt! I rebooted using the Windows 10 DVD, and during parititioning nuked everything and created new partitions from scratch.

About 90% through the "Getting files ready" part, it failed. Error:

"Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D"

I see some people here had the same thing, but not on laptops as far as I can tell. Anybody out there who has any idea how to fix this? I tried:

- Two Windows 10 discs
- ... Read more

A:Clean Install on ROG: Error 0x8007025D (cannot install required files)

I have the same problem.. I have tried different ways to clean install windows 10 but I still get the 0x8007025D error code :/

Read other 4 answers
RELEVANCY SCORE 77.2

This is what is happening. A friend gave me his DELL Inspririon 531 2007 Desktop. It has a pirated copy of 7 ultimate x64 (which I am not sure if this supports 64 bit). Prior to looking into how old the machine was, I was able to install 8.1 64 bit. But it wouldn't allow me to install any drivers from the DELL site. Said that the machine wasn't compatible. So, I tried with Windows 7 32 bit and I am getting this error. I have deleted all partitions, but now, I do not have that option when I choose Custom-advanced. There is no Delete option.

A few times I got the error at 5% other times at over 60%. What can I do to get this to install? It is a legit DVD of windows. Why would it have allowed 8.1 to successfully install now it is doing this? What files are missing? I have tried both deleting the partitions and not deleting. Same result.

A:Clean install error Windows cannot install required files.

Install the correct version of windows that`s on the COA, either buy a new installer from Newegg or call Dell for Recovery CD`s.

The dvd you are trying to use is corrupted and no good.

Read other 9 answers
RELEVANCY SCORE 76.4

My system info is in my profile, installing Windows 7 x64 Ultimate Retail. Attached is all of the report info.

I have no idea what is going on. Whenever I try to install all of the Windows updates it blue screens. Then it will reboot, try to apply the updates, and blue screen again. I've run Linux Server 12.04 on this machine just fine, so I'm fairly certain it's not a hardware issue. Also, this build is brand new (built it a few weeks ago)

Thanks for your time!

Things I've Tried:
- Reinstalling Windows 7 x64 Ultimate
- GPU, CPU, and RAM stress tests (all showed no signs of error)
- Unplugging extraneous HD's
- sfc.exe /scannow (no errors)

EDIT:
The main error code seems to be 0x101
Just got a new one that is 0xFC

SOLUTION EDIT:
I disabled core unlocking and everything is magically working. I suspect I had a faulty core unlocked. Still doesn't explain the stress tests passing, but whatever.

A:BSOD on fresh install when install updates, misc error codes

This one DMP was related to the following.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

Read other 3 answers
RELEVANCY SCORE 75.2

Hi,

Just formatted my PC and reinstalled Windows 7 Ultimate 64 bit. In the process of running Windows Update and Service Pack 1 will not install correctly, but I also never receive an error message.

Specifically "SP1Windows 7 Service Pack 1 for x64-based Systems (KB976932)".

Every time I "Install Updates" it takes about 30 seconds and says the updates were successfully installed. Shutdown and it does its thing, completes successfully, but when I run Windows Update again it is still listed as uninstalled. The update history shows (multiple) successful installs via Windows Update as well as both times I tried the standalone updates.

No idea how to resolve.

CBS split into 2 files and attached.

Thanks for any help.

A:Clean 7 Install, SP1 will not install but no error message

You appear to have data corruption in the SoftwareDistribution folder.


Code:
2014-12-27 11:27:18, Info CBS Read out cached package applicability for package: Package_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1, ApplicableState: 112, CurrentState:112
2014-12-27 11:27:18, Info CBS Session: 30417393_4216837632 initialized by client WindowsUpdateAgent.
2014-12-27 11:27:18, Info CBS Expecting attribute name [HRESULT = 0x800f080d - CBS_E_MANIFEST_INVALID_ITEM]
2014-12-27 11:27:18, Info CBS Failed to get next element [HRESULT = 0x800f080d - CBS_E_MANIFEST_INVALID_ITEM]
2014-12-27 11:27:18, Info CBS Failed to GetNextAttributeEnumValue. [HRESULT = 0x800f080d - CBS_E_MANIFEST_INVALID_ITEM]
2014-12-27 11:27:18, Info CBS Failed to process branched identity type. [HRESULT = 0x800f080d - CBS_E_MANIFEST_INVALID_ITEM]
2014-12-27 11:27:18, Info CBS Failed to process packageUpdateType [HRESULT = 0x800f080d - CBS_E_MANIFEST_INVALID_ITEM]
2014-12-27 11:27:18, Info CBS ProcessUpdateType [HRESULT = 0x800f080d - CBS_E_MANIFEST_INVALID_ITEM]
2014-12-27 11:27:18, Info CBS AddNewUpdate [HRESULT = 0x800f080d - CBS_E_MANIFEST_INVALID_ITEM]
2014-12-27 11:27:18, Info CBS failed to process package [HRESULT = 0x800f080d - CBS_E_MANIFEST_INVALID_ITEM]
2014-12-27 11:27:18, Info CBS Wr... Read more

Read other 3 answers
RELEVANCY SCORE 73.6

I just installed win 7 on a computer. Now Windows updates will not even work once. I tried the trouble shooter no luck.
I was once told a way to install updates without the updater how do I do that? And does anyone have a way to fix this update issue.
Thank you in adavce
 

A:win 7 clean install I cannot get win updates to even work

If you have Windows 7, update manually to SP1.
Download: Download Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) from Official Microsoft Download Center

If updates fail, then run "SFC /scannow" to check the integrity of the OS and it should repair damaged files.
 

Read other 4 answers
RELEVANCY SCORE 73.6

I recently performed a clean install of Windows 7 SP1
 
However I can not get any updates to download.
 
Does anybody have any directions on how to get all the updates when the windows updater doesn't update.

A:Windows 7 updates after clean install

Hi,
 
Check this guide http://wu.krelay.de/en/ it worked for several users...

Read other 1 answers
RELEVANCY SCORE 73.6

I did a clean install on a new HD, my issue is with updates, the automatic updates are detected, but they always say they failed to install, but if i go to microsofts website i can download and save the updates and then install them without a problem, but its a pain. Am I missing a setting somewhere or maybe the installed is messed up?

A:[SOLVED] Clean XP Pro Install and Updates

Welcome to TSF....

There are a number of things that can break Windows Update in XP, including performing a repair/reinstall. Some are also having issues after installing Service Pack 3. For a quick fix, do this:

Open Notepad and copy/paste the following : Blue : text:

Regsvr32 wups2.dll /s
Regsvr32 licdll.dll /s
Regsvr32 regwizc.dll /s
regsvr32 msxml.dll /s
regsvr32 msxml2.dll /s
regsvr32 msxml3.dll /s
regsvr32 comcat.dll /s
regsvr32 shdoc401.dll /s
regsvr32 shdoc401.dll /i /s
regsvr32 asctrls.ocx /s
regsvr32 oleaut32.dll /s
regsvr32 shdocvw.dll /I /s
regsvr32 shdocvw.dll /s
regsvr32 browseui.dll /s
regsvr32 browseui.dll /I /s
regsvr32 msrating.dll /s
regsvr32 mlang.dll /s
regsvr32 hlink.dll /s
regsvr32 mshtmled.dll /s
regsvr32 urlmon.dll /s
regsvr32 plugin.ocx /s
regsvr32 sendmail.dll /s
regsvr32 scrobj.dll /s
regsvr32 mmefxe.ocx /s
regsvr32 corpol.dll /s
regsvr32 jscript.dll /s
regsvr32 msxml.dll /s
regsvr32 imgutil.dll /s
regsvr32 thumbvw.dll /s
regsvr32 cryptext.dll /s
regsvr32 rsabase.dll /s
regsvr32 inseng.dll /s
regsvr32 iesetup.dll /i /s
regsvr32 cryptdlg.dll /s
regsvr32 actxprxy.dll /s
regsvr32 dispex.dll /s
regsvr32 occache.dll /s
regsvr32 occache.dll /i /s
regsvr32 iepeers.dll /s
regsvr32 urlmon.dll /i /s
regsvr32 cdfview.dll /s
regsvr32 webcheck.dll /s
regsvr32 mobsync.dll /s
regsvr32 pngfilt.dll /s
regsvr32 licmgr10.dll /s
regsvr32 icmfilter.dll /s
regsvr32 hhctrl.ocx /s
regsvr32 inetcfg.dll /s
regsvr32 tdc.ocx /s
regsvr32 MSR2C.DLL /s
reg... Read more

Read other 3 answers
RELEVANCY SCORE 73.6

I have done a clean install of Windows 7.  I have installed all the drivers needed and the computer is running great.
 
My goal is to keep the computer running great and get some work done.  I do not wish to return to spending massive number of hours fighting a computer and trying to regain my bandwidth and data for my use.
 
Is there a list of which updates to not install?
 
 

A:Win 7 Clean install, Now which updates to avoid?

 Typically after a reformat if thats what your calling a clean install you would want to get Windows updated, Install AV, antimalware etc.  Sounds like you had malware on the machine. Normally software can update itself. Not sure what you mean by updates to not install?

Read other 6 answers
RELEVANCY SCORE 73.6

Right after a clean install of Win10 how much time does It take before it starts to check for updates?

How much delay time is this?

Should I leave my machine ON overnight and it should start checking for updates to download?

I installed Win10 about 1 hour ago.
So should I give it more time ?

I have it set to automatic check and install.

A:Win 10 Automatic Updates after clean install?

From my experience it happens almost right away. What I do is press the check for update button to get it going.

Read other 3 answers