Over 1 million tech questions and answers.

Solved: thomson tg782t modem & router & printer connection problem

Q: Solved: thomson tg782t modem & router & printer connection problem

I have installed new bigpond thomson tg782t broadband to my networked 3 computers that also connect with a sharp ar-m162 multifunction printer thru ethernet cables and router. When I try connecting the ADSL thru the new modem the printer goes off line and won't print. Operating system on all 3 computers is windows xp. Also sometimes the LAN operating system on the main computer running everything keeps flicking between connected and unplugged/ disconnected.
Has any one got any ideas on how to fix this very annoying and time consuming problem. Much appreciated any help.

RELEVANCY SCORE 200
Preferred Solution: Solved: thomson tg782t modem & router & printer connection problem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: thomson tg782t modem & router & printer connection problem

Read other 6 answers
RELEVANCY SCORE 148

Hey guys,

ok so i recently upgraded our modem because the old one was crapping out all the time, it was just old. So we got a new one through telstra, the thomson tg782t and it worked fine. We had 3 laptops, 2 iphones, and an ipod touch all being able to connect, although in the last week or so.. nothing can connect wirelessly? we thought it might just be a faulty or defective modem, since it was only 2 months old it was still under warrenty.so we got it replaced through telstra once again free of charge, the new one came and we had the same problem. Can anyone think of what might be causing this problem?

Thanks in advanced,
Jordan Fuchs
 

A:Solved: Problem with thomson tg782t modem router

Read other 11 answers
RELEVANCY SCORE 107.6
A:Thomson TG782T Modem Internet LED truns red while others still in green

please do not start or duplicate threads for the same problem -
i will close this post
continue here
http://forums.techguy.org/networking/945493-thomson-tg782t.html
 

Read other 1 answers
RELEVANCY SCORE 96.8

This may be a little long winded but ill start from the beginning. I have 2 TG782T Thomson gateways 1 from Telstra and 1 retail version. Recently I starting having a problem where the PC's in the network (there are 3 connected at present) would not connect to the net, though all the PC's network sharing centres showed full internet connectivity. This problem was completely random as at times all the PC's could access the net where other times none could. Thinking it may be a router issue I disconnected the Telstra router and switched to the Retail router I also set all the PC's to static IP's as I have had a similar issue to this before and that sorted it. All seemed well last night as all PC's were connecting well. Fast forward to this morning and we are back to square one. All PC's are still on static addresses so that has not changed but they all randomly gain and lose net and there doesn't seem to be any pattern to it. Even more frustrating is that network share centre still shows full internet connectivity at all times. The problem seems to persist to all internet based services as well not just browsers (Curse, Wow, Steam etc). Oh and i have also tried disabling all firewalls (briefly) to see if that was the issue to no avail.

I'm completely lost and any help would be appreciated.
 

A:Solved: Thomson TG782T Strange net issue

Read other 7 answers
RELEVANCY SCORE 89.2

How can I find the guide for this modem? Am having problems getting VOIP to operate through this modem.
 

A:Thomson TG782T

Google

http://www.thomson.net/GlobalEnglis...DSLGA-VoIP_SetupUserGuide_TG782_en_102008.pdf
 

Read other 3 answers
RELEVANCY SCORE 89.2

I need some help with my sily modem.
It started acting up yesterday. All the LEDs are green, but not the internet LED. It is RED light, and I cannot access to the internet. I have turned it off and on again, but it still not work.

Would someone please help me?

MANY THANKS
 

A:Thomson TG782T

Read other 6 answers
RELEVANCY SCORE 86.4

Hello.
Our Bigpond Thomson TG782T router/modem cuts out every 20 or so minuites. It automatically gets back onto the interent anywhere like 30 seconds to 5 minuites after droping out. My laptop still stays connected to the network but with "no interent access".
It happens to every network device including wii and I pod touch.

It is so annoying! I am not such a wizz with networking so try to explain things.

Attached is a screen shot of what it says when it drops out.
Thanks!
 

A:Internet Drop Outs!- Thomson TG782T. Help!

Read other 16 answers
RELEVANCY SCORE 83.2

tg585 v8, thomson router wifi, keeps freezing when in certain sites and cuts internet off
 

A:modem thomson router

more details needed
 

Read other 1 answers
RELEVANCY SCORE 80

I apologise in advance for my ignorance / stupidity but I would really appreciate some help...

Five months ago we moved into a new apartment, and connected up our broadband; the ISP provides a Thomson Speedtouch modem (ST546 v6), which I understand from Tech Support is running software v4 (it was issued with V5, but rolled back to V4 for stability issues).

We prefer a WiFi network, so purchased a Belkin N Wireless Modem Router (F5D8636-4 v2); I connected it up ditching the ISP issued modem, and all worked well for four months. Suddenly it refused to see the ADSL connection - orange light flashing.

So after four nights of 'fault resolution' with Belkin, they decided to send me a replacement... which I finally received last night. It didn't work - same problem, flashing orange light.

I have the correct user name and password for the ISP - checked it not once, not twice, but four times. The Thomson Speedtouch works, but doesn't provide a WiFi environment.

Can I connect the Belkin modem router into the back of the Thomson and transmitt/carry the WiFi signal that way, and if so, how? I tried (the obvious to me) plug a ethernet cable from the Thomson modem into the Belkin, but nothing.. I'm guessing there are a few important steps I missed.

Please help.. if I have to call another Customer Services team where they don't speak English, I may cry*
(*Im a girl.. crying in the face of challenges is acceptable. Maybe)
 

A:'Bridging' - thomson sppedtouch to a Belkin N Series modem router

have you tried resetting the Belkin back to factory defaults and then logging in and setting up again
 

Read other 3 answers
RELEVANCY SCORE 73.2

Hi,

I'm wondering if anyone can help. I have the above modem and I want it to connect to the internet automatically at windows startup. I have tried just putting it in startup and that doesn't work. All it does is bring up the window, prompting me to connect. There must be a way of making it connect automatically without needing to press connect.
If anyone has this modem and understands my problem, or knows what to do, I would be grateful for a step by step guide.

Many thanks for your help in advance.

Regards,

Lee
 

A:Thomson Alcatel Speedtouch 330 Modem problem

Read other 7 answers
RELEVANCY SCORE 70.8

I just bought a used HP officejet 6500 E709a and the usb port does not work. I have it hooked up to the modem/router that is hooked up to my computer. I do not know how to install the printer. Can anyone help me?
 

Read other answers
RELEVANCY SCORE 70.8

I'm working for a firm in Cyprus with about 15 Computers online.

We experience many disconnects or rebooting procedures of the modem and in general slow browsing or stucking while trying to access webpages.
The provider made a check of the telephone line and they said it's a very stable line. Further they said it's our own fault, because we connect 15 computers to a switch/router (Dlink). This switch would cause the Modem (which is a combined Modem/Router with 4 Ethernet Ports) to have interruptions and disconnections.
If they send a technician, the service guy said, we might have to pay when they don't find a problem. They will test it with their own laptop!

I'm a little bit confused here, because we never had such a trouble before. Can this multiple switch to which all the computers connect to really cause an instability to the Thomson modem/router of the provider?

By the way, the speedtest always shows appropriate results even while browsing stucks. Can a module in the Modem be damaged? Bad firmware?
 

A:Solved: Thomson Speedtouch Modem, disconnects often and slows down browsing

Read other 10 answers
RELEVANCY SCORE 70.4

hi all
i brought a new Thomson st 585 v6 router an got it to work,every thing was going great until i started downloading with a torrent client.
every two hours or so i cannot get online and my browser displays the msg:"the bage cannot be displayed".

Product Name: ST585

Software Release: 6.2.17.5

Software Variant: AA

Boot Loader Version: 1.0.8

Product Code: 36029470

Board Name: BANT-W
althought i don't undersand a word of the above i copy-pasted it as it seems to be helpful
 

A:problem with thomson speedtouch 585V6 router

From the TSG Rules, which you should have read when you joined.

P2P Instructions - The purpose of P2P is to illegally trade copyrighted material. We do not support the use of P2P networks and any threads requesting help for them will be closed. This includes Kazaa, Bearshare, WinMX, and the like. If you're interested in the topic, you are free to discuss it on our site (and please visit www.StealingIsIllegal.com), but information on how to use them will not be provided.Click to expand...

This thread is closed.

PS: This is the second time you've asked about P2P applications, let it be the last.
 

Read other 1 answers
RELEVANCY SCORE 70.4

I live in a shared house and one of the tenants, who is away for weeks at a time leaves his p2p sharing program running 24/7 eating every last bit of the bandwidth in the house. I have spoken to him on several occasions but to no avail.

I read about blocking the ip address of his computer but the instructions did not accomplish what I required.

I telnet into my router, log in with Admin and Pass

{Administrator}=>firewall
{Administrator}[firewall]=>rule add
chain = forward_level_Standard
[index] =
[name] =
[clink] =
[srcintf] =

this is as far as I have got as these were not included in the instructions I read previously, elsewhere.
Any help would be greatly appreciated

thanks in advance
 

A:Solved: Thomson 585 V7 Router Ip blocking

ok i accomplished my end goal using mac filtering in telnet instead of trying to block the ip

wireless macacl add hwaddr=00:xx:xx:xx:xx permission=deny
 

Read other 1 answers
RELEVANCY SCORE 70.4

Hi
I have just gotten a thomson TG585 modem/router. I have it connected to my main home PC via ethernet and can get the net just fine on that PC. But I've read the manual and it says to shortly press the front wireless button, I do that and nothing happens at all. I have a solid orange light for wireless on the top of the unit and according to the manual that means "no wireless activity, WEP encryption"

does anyone have any idea what that means and how I get my wireless to work? I need it for my phone and also for tivo.
thanks
wendy
 

A:Solved: No wireless with thomson router

Read other 6 answers
RELEVANCY SCORE 70.4

SBC sent me a Westell Proline F90-610025-06 modem/router for my new DSL account. It works fine on one computer, but when I connected it to a second computer through a Linksys switch (ethernet cables), the second computer was not able to obtain a different local IP number from the Westell. Both computers show a address conflict error when they are both on. I pushed the buttons in the advanced section of the Westell menu, but could not find any way to expand the range of IP addresses available. The only option I could find was to change the lease time on IP addresses, or switch from PPPoE to PPPoA. I pushed repair connection in the computer LAN menu, but the computer was not able to get a different IP address. The Westell just kept giving both computers the same IP. This is my first broadband connection, so I am an amateur on connecting them.

Windows XP SP2 I tried powering everything down, and restarting in this order: Westell, Linksys, computers It didn't help. Manually inputting a different IP address on one computer's LAN connection didn't do anything either. How do I get the Westell to give different local IP addresses to different computers?
 

A:Solved: Modem/Router Connection

Read other 16 answers
RELEVANCY SCORE 69.6

After trouble shooting on my own, I'm stuck. My current situation is that I have a Netopia (Cayman 3346) DSL modem-router (not wireless) that is connected to a (Linksys E100) wireless router. I currently run a small business that has two other computers connected through the Linksys router and are properly configured on the network.

Problems, Thursday night was the last time I could connect using the wireless connection. I cannot connect wirelessly now, but I can connect through the Netopia modem-router.

Manual Troubleshooting included:

-CMD for proper release/renew (IP shows 192.)
-Hard reset both modem and router.
-Manually configured the Linksys router.
-Called Netopia and manually configured modem-router successfully
-Again, computers hard-wired to modem-router will connect.
-Lights on Linksys router are lit and working properly (i.e wifi icon,power, and line 1)

Any ideas? I found in the Netopia settings of the WAN to be configured this way, should I change to IP Address?

Any help would be appreciated as my business is hindered by only having one computer operational.

EDIT: Here is a picture from the Netopia WAN configuration page
 

A:Solved: Connection issues: Modem to Router

Read other 9 answers
RELEVANCY SCORE 68.8

Hi I have a Thompson TG 782T modem (4 ethernet, 2 phone)and wireless capability, I have tried to connect my phone through the modem which is connected direct to the wall socket. The problem I have is that i dont have a dialing tone the only sound I get is similar with when the phone is bussy or left open a continous beeping.
I know I can use double addaptors and connect my phone direct to wall socket, but i would really like to know why cannot use the Thompson modem which comes with 2 phone features?
I do have filtres as well so in my opinion it should work. i plug my phone in the wall socket it works but negative when I plug it through modem. I hope someone can shed some light i only have basic knowleage about IT telecomunication or phones.

Thanks
 

A:Solved: Thompson TG782T problem

Page 33 of the user manual - shows how to set up a traditional phone to use the VoIP facility
http://www.technicolorbroadbandpart...ways/products/product-detail.php?id=181&seg=7

it appears you need a VoIP (Voice over internet protocol) account - do you have this ?
 

Read other 2 answers
RELEVANCY SCORE 68.8

hi
how to setup thomson speedtouch 780 to work with conceptronic router 4 ports,
i have 4 pcs to connect, speedtouch has 2 dsl, 2for iptv, voip,ptsn
i can't get to work with router,

i'm using wired connection

thank you
 

A:Solved: thomson speedtouch 780wli and conceptronic router

Read other 11 answers
RELEVANCY SCORE 68

I'm trying to help my friend.

The basic situation is this:

His only source of internet for his office is shared with another party. It is a DSL line. There is a Verizon DSL modem that goes to a physical firewall / router and then there's CAT5 serving the other party from that router.

My friend has no access to the existing router / firewall settings and it is really impossible to work with the other party. So is it possible to split the connection before their router so that my friend can have his own separate firewall and router?

Thanks
 

A:Solved: DSL Modem to Physical Firewall/Router - Possible to split connection BEFORE f

If they pay for a block of static IP's yes. Verizon modem to switch, then switch to each router each with one of the static IP's. Otherwise with the the connection from the existing router you can plug into the WAN of another router which will create a separate network, but if you have to do any port forwarding it won't work.
 

Read other 1 answers
RELEVANCY SCORE 68

Hi all,
My dad recently brought a Belkin N+ wireless modem router for my parents home and asked me to set it up for him (as he is not very tech-savy). I set the router up with no problems whilst the rents were away in Malta on holiday and had no problems for about 4 days.

When they arrived back the internet was still fine until the next day when for no apparent reason the connection dropped and i had to power cycle it to make it work again. Now at least once a say the router will drop the connection and i have no idea why. I have tried every logical combination of settings and i cannot stop it from dropping the connection.

I've called up Belkin tech support but they were useless and told me to try everything I have already tried which is:

Static IP.
Fixed DNS.
Power cycling.
Firmware update.
Checking the log file.
Restoring defaults.
Turning the firewall off.
Adding MAC addresses of the relevant computers to the routers "safe" list.
Port forwarding ...

And the list goes on.

All i can think of now is to call BT and post my Router settings here (these are the most stable settings i've found so far).
Can someone please check out these settings and make sure i haven't done somethign incredibly stupid? I am a software engineering student and fairly confident of my abilities but it would be nice to have another opinion (not Belkins).

LAN Settings:

IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
DHCP Server: On
IP Pool Starting Address: 192.168.2... Read more

A:Solved: Belkin N+ wireless modem router keeps on dropping connection

Read other 9 answers
RELEVANCY SCORE 67.6

Allright, after trying fro 2 days i really hope i can get some help ;-)

3 PC` s ----- laptop win7 no probs
Desktop winxp No probs
Desktop winxp Can not ping the modem comes up with limited or no connectivity.
Try repair : following action cannot be completed. Renewing your ip addres

Try network diagnostics: under Network adapters it says 2WireGateway USB "Failed". There is only one networkcard in the pc and thats not this one. (how can i get rid of this?)
Then it shows Gigabit Ethernet network PCI adapter (Rev D) (Passed)

Between the 2 desktops i use one cable and the same connection to number 1 at the modem.
This means its not the cable. And not the modem.

Any one who has advice.
Thanks heaps and a lot in andvance. Please let me know if you need more info.

The modem does not detect the pc. The pc does not show up in the devices list on the modem.
 

A:Solved: Thomson TG 782T ethernet connection

For the two desktops please show the following (and identify the problem PC if it is not obvious).

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 2 answers
RELEVANCY SCORE 67.6

nevermind. solution found. just reinstalled router information through installation CD as last resort. please delete thread.
 

Read other answers
RELEVANCY SCORE 66.8

I Need some help. I got a new laptop and when i enable my wireless connection on my 2wire AT&T 2701 modem and turn my laptop on to connect to a wireless connection my modem/router losses all connection.Works fine when it is hardwired. Already tried 3 seperate modems all 2701 AT&T models.Called Att and messed with some configurations but nothing has worked.Possible line problem?Has anyone had similar issues?
 

A:Solved: 2wire modem/router loses all connection when laptop connects wireless

Read other 10 answers
RELEVANCY SCORE 66.8

Earlier today I attempted to change the setting on my Westell 6100 modem such that it would simply bridge the connection to my Linksys WRT54GS router, basically involving setting the router to bridge only and turning DHCP off. Now I no longer get an internet connection through my router when previously the connection had worked perfectly fine before. I following the steps of cloning the MAC address to the router and have done the proper resetting steps (computer, them router, then modem) but I simply can't get an internet connection through my router. The process to set up simple bridging from the modem what supposed to end up with the internet light no longer turning on but the light turned back on following one of the resets.

Currently, I can connect to the internet through the modem just fine but I get nothing when I include the router. I'm not sure if there are some other settings I'm supposed to be changing as I can't seem to find anything past what I've already done when researching online. At this point I would just be happy reverting the settings I've changed but I don't know how to access the modem now that DHCP is off.

Basically, I'd prefer to be able to get the router working with these new settings but if that proves too difficult (as I've heard it can be when trying to get Westell modems to work with Linksys routers) I'd like to learn how to access the modem and change the settings back to what they were (prefer... Read more

A:Solved: Lost internet connection when setting modem to simply bridge to router

Read other 7 answers
RELEVANCY SCORE 66.8

I am having the exact problem (krustyzworld) had. I have an ATT 2701 2 wire modem/router that drops off when I use my wireless laptop, it works fine when I use a Ethernet cable connection. I have tried a second ATT 2701 with the same results. The only difference between (krustyzworld) and myself is I have the correct power source and my power light don't change (it stays on steady). What happens to me is that first the internet light goes out than the green dsl light goes flashing red, in less than a minute everthing returns to normal until the next random drop off.
 

A:Solved: 2wire modem/router loses all connection when laptop connects wireless

Read other 8 answers
RELEVANCY SCORE 65.2

I'm switching from AT&T U-verse to Comcast since comcast can offer speeds up to 5x faster.

As you might know At&T uses ethernet as incoming signal vs. Comcast that uses 75 ohm cable.

I need to buy a new modem and router to install the new Comcast service.

I have two questions:

1) What is better? the combo modem/router units (i.e. Motorola SBG6580) or buying a separate stand-alone modem Motorola 6141 modem + Netgear N750 wireless router)?

2) I do have one issue to overcome. I have one TV in my house that is wired for cable only. That is, it has a cable run going to it. It's too difficult for me to install an ethernet run to it, so I'm stuck having to use the cable run. Are there modem/routers that have a cable OUT so that i can feed this TV its hard-wired signal?

Thanks,
bob
 

A:Solved: Modem/Router combo units vs. stand-alone modem + router?

see attachment
 

Read other 2 answers
RELEVANCY SCORE 63.2

I have a friend who was using a Cisco Modem, can she switch to a Thomson DSL modem without issue?
 

Read other answers
RELEVANCY SCORE 63.2

So I just received a new modem/router from CenturyLink (previously Embarq). It is a ZyXEL Pk5001Z and has both the modem and router together. Set up was pretty easy and everything worked fine except I have one computer connected to the Wifi and can't get any of the other computers connected via Wi-Fi. Currently I'm on the computer hooked up through a LAN port and it works fine. Right after I hooked up the modem the only changes I made were to the SSID and WPA2 password. My dad connected to the router and it asked for the WPS pin and he was able to connect.

When trying to connect on any other computer it asked for the WPA2 password but then after a few seconds it says it is unable to connect. After trying it a few times I figured that it was something to do with the WPS so I turned it off on the modem and it still didn't work. I also turned off the WPA2 and all security and it is the same thing. My fathers laptop is still connected perfectly fine and works as well as mine though the lan port. I've tried on multiple computer and phones and it is the same thing. I have everything setup exactly the same as on my dads laptop and it just won't connect.

IPconfig for my current computer on LAN. I'll add my dads to a post under this.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Hales>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Hales-PC
Primary Dns Suffi... Read more

A:Solved: New CenturyLink modem/router Problem

IPconfig for working Wi-fi laptop.

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Hale.Hale-PC>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Hale-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : PK5001Z

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : 76-1A-04-77-83-24
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Physical Address. . . . . . . . . : 00-26-2D-6C-A1-86
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : PK5001Z
Description . . . . . . . . . . . : Atheros AR5B93 Wireless Network Adapter
Physical Address. . . . . . . . . : 70-1A-04-77-83-24
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::c8eb:71db:14... Read more

Read other 2 answers
RELEVANCY SCORE 63.2

I received a new Arris Modem from Comcast and could not firgure out why my D-Link router would not work with it. The router worker perfectly with the prior Comcast Business router/modem. And my PC worked fine with the new modem. But when I plugged my computer into the router....nothing!
After reading a bunch of similar posts on the web, I was perplexed since no one had a rational answer. I called a tech savvy buddy who nailed it. I have to say I did notice the router status showing no network connection and no cable connection ... that was the clue.
The modem has a dumb RJ45 port! It needed a CROSS-OVER CABLE!!!
Bingo! all problems solved.

I hope this post helps save some people from the frustration and day of wasted time I experienced.

 

Read other answers
RELEVANCY SCORE 63.2

Hi, there. I need some help. I had recently changed usage from Aztech G modem to Belkin G+ MIMO modem. After setting everything up, I noticed some strange connection problems.

Firstly, when I try to access the Internet, the loading of the web pages seemed to have SLOWED down instead of improving!(Though, I have noticed that I am able to download files faster) I must have missed a setting or something...

Secondly, the other strange problem, I can't access Google!!! I can access Yahoo and MSN but I can't access Google! So strange!!! Both problems seem to happen in both browsers(Internet Explorer and Mozilla Firefox)

I hope you can help me ASAP, because I really need to know whether to return the new router modem or not! Thank you!
 

A:Solved: G+ MIMO Modem Router Problem

Read other 9 answers
RELEVANCY SCORE 62.8

Hello, this is my first post here and I have a router problem I would appreciate some help on. I find situations similar to mine in the other posts but not exactly.

I have a PC running WinXp pro sp2. I am on Embarq DSL. My DSL modem (Sprint 645 series) was provided by my ISP a few years ago. For about 2 years now I have had a linksys WRT54GS wireless router in line and everything has been fine (good internet connection for my pc and good wireless signal for my two other computers). I use Internet Explorer.

Yesterday, I attempted to secure my wireless signal. I did lots of research on line to get instructions on how to do this. The advice I used said to press the reset button on my router. Upon doing this, I lost my internet connection coming through my router to the pc, therefore the wireless signal is also no more. I can bypass the router with a cable directly from the modem to the pc and access the internet fine.

I have tried powering off everything and then back on with the modem, router, and pc in that order.

With the cable from the modem to the router plugged in the internet port on the back of the router and a cable connecting the router port 1 to the pc, the following lights are on burning solid as follows (from left to right): the rectangular light (Cisco Systems), power, WLAN, ethernet port 1, and internet.

Can I get some advice on how to overcome this problem? Thank You very much!
 

Read other answers
RELEVANCY SCORE 62.8

So I just got a new 40mbps internet connection and the they gave me a new modem/router thing im not exactly sure what it is but its brand name is SMCD3GN anyways i tried puting up a server on Warcraft3 and no one would join so I had a friend join my on Garrysmod and he could not join either so i logged into my router/modem and I did this

And still no one could join I have spent about four hours now trying to fix this and I can't figure it out.
 

A:Solved: Port forward modem/router problem

Are you positive that your IP address is 192.168.1.1?

I think that router defaults to LAN address 192.168.0.1, which would mean that your computer's IP would be from 192.168.0.2 through 192.168.0.254.

I based my thinking on this manual, which may not be the correct one.
 

Read other 2 answers
RELEVANCY SCORE 62.8

Hello,
I am trying to set up a wireless connection in my house. I have a Netopia 2241N-006 modem, and I got a Linksys WRT54G router. I followed all the instructions that the Linksys installation CD give, connected all the cables right and all the lights that are supposed to be on are. My computer recognized the router and set it up, but it won't connect to the internet. I can see the internet/LAN connection icon on my toolbar (2 computers with blinking blue lights, and it says it's connected and firewalled, but neither Mozilla nor Explorer will connect to the internet).

I found this post on here:
http://forums.techguy.org/networking/527094-solved-netopia-2241n-006-modem.html
And it seems like we have the same exact problem, but I don't know how to do all the stuff that JohnWill advised. I think I am more than average with computers, but I have very networking experience.

Can someone please explain to me what to do, or at least explain how to do all what JohnWill says on the other post that was solved.

Thank you very much. Any help would be greatly appreciated.
 

A:Solved: Netopia Modem with Linksys Router Problem

As long as you aren't doing any port forwarding, you can use a simpler solution.

Logon to the web based setup of the router and change it's base address from 192.168.1.1 to 192.168.2.1

This will eliminate the routing conflict and allow it to connect.

If you intend to port forward, please tell me exactly what part of these instructions you don't understand.

Connecting two SOHO broadband routers together.

Configure the IP address of the secondary router to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!
 

Read other 2 answers
RELEVANCY SCORE 62.8

My friend's router problem feels unfixable! i have come to the forum that i have used many times to aid me in other computer related problems. i hope that you guys have the answers that i need to fix this!

The last working Setup:

my friend was succesfully using a cable broadband modem to router to computer setup, all using ethernet cables as the medium of data transportation.

the problem:

My friend wanted to change a setting on his router. he went to 192.168.1.1 and attempted to log on, but could not for the life of him remember his password! i then suggested that he reset the router to computer defaults via the reset button on the back of the router. he did this, and then unplugged and replugged in the router from the power source. he went back to the computer to see if he could log back in. everything looked fine. he noticed the task tray icon "local area connection" coming up and he also noticed the "internet connection" task try icon come up saying connecting, then after a few brief moments, went to disconnected. we were, however able to return to the router access page via 192.168.1.1 and were able to log in with the default login and password (admin and admin). it appears that the connection is valid from the router to the computer, but not the internet.

a final note:

i have been assisting him over the phone, and i suggested that he power cycle the entire system, based on research. i had him turn off the computer, unplug the router, and... Read more

A:Solved: Router/Computer/Modem Internet Problem

Read other 16 answers
RELEVANCY SCORE 62.8

I just purchased a new Asus P5N-EM HDMI motherboard. With a new installation of XP Pro and all updated drivers, if I connect from the LAN port to my cable modem, the lights on the LAN port light up and I connect with no problem. However, if I connect to my Belkin F5D7230-4 router, it says "A network cable is unplugged". I have two other computers that connect to the router and they all work fine. I have switched cables, had the Asus be the ONLY one plugged into the router and any other combination I can think of. I called Belkin and they walked me through several things including resetting the router. Again, works fine for all computers except the Asus. Any help would be greatly appreciated! Thank you.
 

A:Solved: Cannot connect through router, only modem (strange problem)

Read other 8 answers
RELEVANCY SCORE 62

A friend of mine has a printer he wants to connect to.
It is now connected to a desktop computer and the desktop is connected to his router. What he wants to do is eliminate the desktop but still be able to access the printer from his laptop which is on the ether net via cat5.
My question is, what would he need to connect the printer to the network without going thru the desktop. The printer does not have an ethernet jack but it does have usb and the router does not. Router is cat5 or wireless only.
 

A:connecting printer thru modem or router

As far as I am aware, cant be done. USB and cat5 are different signals, so short of leaving the desktop running, he wouldnt be able to conect. Only other possibility I think is to connect the printer to the laptop via USB>
 

Read other 3 answers
RELEVANCY SCORE 62

So 5 days ago my modem started to do this:
-constantly rebooting,like you turn off the power and then turn it back on,at an interval of 10 minutes minimum.
My network doesn't work only on my laptop,on my phone is working.I am soo angry it is driving me crazy plz help me!
 

Read other answers
RELEVANCY SCORE 62

Hi,

Hope I'm in the right section.

I have a suspicion that neighbour PC/laptops are visible on (maybe even using) my home wireless network.

Thing is when I go into Game & Application Sharing there are a bunch (6) of devices in the drop down. I recognise the names of our own devices but don't recognise the others.

Simple question (I think/hope): If they are in the drop down of "devices visible on your network" (according to the Thomson Manual) does that mean that they *could* be accessing my network.

(I use the WEP security option with a pretty complicated id - though it's the id that came with the modem!).

Thanks in advance for any assistance.
 

A:Thomson TG585v7 modem - have I secured it properly

If there is an option, use WPA2 instead of WEP. WEP security can be broken in 10 mins and is outdated.
 

Read other 1 answers
RELEVANCY SCORE 62

Hi!
I am on dial-up out here in the sticks and am having trouble with new to me desk top connecting. It usually takes 15 min. to get a connection due to a busy signal heard from the computer speakers. When it does connect it is 16.8 or 26.4 kbs. After disconnecting and re-connecting a couple of times I get 49.2 kbs. I did not have this problem with my previous desk top, always connected the first try and at 45.3kbs. As far as the busy signal when I dail the same number on the phone there is no busy signal. When I purchased this unit the shop had to install a modem due to being on dial up. It is an Airlink 101 56K V.92 PCI internal modem. I have tried ISP suggestions with no improvement. Any suggestions would be appreciated.

Thanks 99
 

A:Solved: Modem Connection Problem

Read other 12 answers
RELEVANCY SCORE 61.2

Just moved across town in DFW and now have SBC DSL. They gave me their 2Wire modem/router and I'm confused about something. As long as my computers (macs and PCs) are connected to the modem/router with ethernet cables, I can print to my old Laserjet 4000n with out any problems. But as soon as I go wireless with any of the computers, I can no longer see or connect to the printer that is still hardwired into the 2Wire unit. When I had Verizon DSL the modem/router they gave me was able to allow wireless printing from my laptops to the hardwired HP Printer feeding into a Westel modem/router.

Can anyone tell me is this is the nature of the 2Wire units? Why do the computers (Macs and PCs) still see each other when wireless but they can't see the laserjet? Do I need to change some settings in the modem to allow the wireless laptops to see the wired Laserjet? like I said, as long as everything is connected with ethernet cable I have no problems. The printer is always connected to the 2wire modem router.

Any help is much appreciated!!!

thanks!
 

A:wireless modem/router can't route to printer

Beginner Guide
To start try this guide.
 

Read other 1 answers
RELEVANCY SCORE 61.2

Mt friend cannot connect to a cable modem that works for his roomie. I had the PC connected at my house so I know the NIC etc at leas WAS working.

The ping local host returns one IP 127 etc.

We have tried cables we know are good also.

Any help appreciated!

Thanks
 

A:Solved: Cable modem connection problem plz help

Read other 16 answers
RELEVANCY SCORE 60.8

Just hooked up to att uverse ,they installed a att200 modem/router ,I have 12 mbps internet. I cant seem to make it hook up to the router
I have tried to enter the info on the printer keypad and throught the computer. computer is pent. 4 ,xp,

I was able to connect my laptop and kindle to the router.
I am not sure if the printer is recognizing the router or vice versa.
in general I dont know what is happening

I just found out it will print from my laptop,so I think my printer is connecting to the router,correct?
just tried to print from laptop again and did not work.
the wifi light on the printer is off.
it used to work great with the other router before att upgraded me

Printer is a epson workforce 520

It is a motorola router
 

A:AT&T installed new router/modem now my printer will not connect wifi

It worked, then didn't work? What? :S

Maybe check the wifi encryption. Make surei t's WPA2 and not anything else.
 

Read other 7 answers
RELEVANCY SCORE 60.4

I just installed my speedtouch router,and seem to have configered it ok. I am new to routers dont no nofing about them.

But it seems to me after doing on line tests (shildes up) i dont need a firewall on my system windows xp as my router got one installed, am i right in beleving this or do i still need zonealarm running..

Does anyone now where i can get a good setup manual, so i can setup two desktops running windows xp. as speedtouch manual does not explain it to someone who nows nofing about routers.. thanking you.....
 

A:Thomson speedtouch 530 router:

You don't really need a software firewall (such as zonealarm) if you are behind a NAT Router. A NAT Router does a god job of keeping unwanted incoming packets out, so thats fine. If you still want an outgoing firewall then keep the software firewall, but you don't really need one.
 

Read other 1 answers
RELEVANCY SCORE 60.4

Hi all ,

I have a Thomson TG 587n router that for some strange reason blocks all HTTP traffic. When connected , downloads work fine as do torrents, p2p applications , and streaming radio. however ALL HTTP traffic is blocked . From ANY browser. Websites appear as 'loading' until i get a timeout blank screen.

I've tried updating the firmware but i cant find ANY firmware information on this online. (not even on the company site).

I've also tried using it as a switch in bridge mode with another router and the same problem persists.

Here are the specs on it.

http://www.modem-help.co.uk/Alcatel/TG587n-v2-Multi-User-Wireless-Hyper-N-Gateway.html

Does anyone have any ideas ?
 

Read other answers
RELEVANCY SCORE 60.4

I am offered a Thomson TG585 router by my ISP, I do not have a network card or anything on my desktop PC, will this unit work with a USB Wireless adaptor please. Thanks in advance Teriel9
 

A:Thomson TG585 router

Read other 6 answers