Over 1 million tech questions and answers.

can I extend the capacity of my Iomega StorCenter ix2-200?

Q: can I extend the capacity of my Iomega StorCenter ix2-200?

Hi,one of my Iomega StorCenter ix2-200 2TB hard drive has crashed.can I remove both hard drives and replace them with 2x4TB in order to have total 4TB RAID1? The devices is with firmware 4.1.408.34845 Thanks.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: can I extend the capacity of my Iomega StorCenter ix2-200?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 46.8

Ok, so I bought my Yoga 910 (4k/i7/16gb/512ssd) just a few days ago and, besides the fan noise (which I am currently working on) as well as recently discovering the issue I am about to discuss, I absolutely LOVE this machine! It is a workhorse and the build quality is amazing. That's saying a lot coming from a previous Mac user... Anyway, I was looking around today while trying to get the fan issue resolved and I noticed that the Full Charge Capacity (FCC) of the battery is only 75410mwh, while the actual Designed Capacity is meant to be 78000mwh. It is about a 4% performance decrease basically right out of the box, is that normal? I only ask because I originally bought the FHD/i7/8gb/256ssd version, before exchanging it for the upgraded unit due to liking it so much, and noticed that the FCC on the original one was actually 80102mwh, quite a bit higher than the designed capacity. Not sure if there is a setting preventing the PC to charge to the full amount or what? Maybe I just got a battery with lower ratings? Any help would be MUCH apppreciated!

Read other answers
RELEVANCY SCORE 46.8

I have an X230 with 6 cell battery. The OS is Windows 8. I've noted that the design capacity and full charge capacity are both lower with 9 cycle counts. The design capacity is 57720mWh and the full charge capacity is 57420mWh while these two figures should be 62160mWh for the new battery. I know that the full charge capacity will be reduced after use while I have two questions: 1. Considering there are only 9 charging cycle, now the figure are too low for the full cycle charge. It means 7.6% loss after 9 cycle charge. It is so ridiculous. 2. Why the design capacity is reduced? Is it should not be changed, right? I noticed a knowledge base lead abt the design capacity. http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Design-Capacity-appears-to-be-changing-on-m... While my OS is Windows 8, there is no Power Manager, so I can not understand the explanation exactly and do not know how to recovery the battery. Pls kindly check my questions and help me to figure it out, thanks!

A:Battery design capacity and full charge capacity are lower

I could think of one reason why it might be like that. Lenovo might have artificially limited the max full capacity of the battery in the batterypack firmware (it was suprising to me that battery also has its own firmware!) so that there is never a overcharge on one of the cells inside the battery pack. I've seen this in a Toshiba Portege R835 laptop too. It's nearly impossible to have exact same capacity for each cells (called cell balancing), so when you try to charge a batterypack with 95% charge all the way up to 100%, one cell might already have reached its 100% (this is the inferior cell) while one cell is only at 90% (this is the superior cell). The batterypack will try to keep charging all the cells resulting in overcharge for the inferior cell and degrade it even more quickly. By limiting the maximum capacity to less than 100%, it helps prolong the battery life, and similar effect can also be achieved using using the PowerManager tool in Windows 7 by restricting the charge threshold (configure the setting so it stops charging at 90% for example). I don't know why they don't create a Windows 8 version though. So in Windows 8 what I do is add a registry key which limits the max charge capacity. This needs to be done only once, but if you ever see it behaving differently, then you could re-add the registry key and it should work again.  Below is a .reg file that I use to set the battery charge only starts at 70% and stop at 90%. Windows Registry... Read more

Read other 2 answers
RELEVANCY SCORE 40.8

I took my Acer Laptop to the computer shop to get my SSD fixed and when they finished it and got it home i noticed my drives where split into 2 drives of 50GB approximately; C: & D:.
I have been trying to merge or at least give some space to drive C: , but my extend volume button in the partition manager is gray, even tho i have allocated space.
please give me some advice.

A:Extend Volume on C: Drive grayed out, can't extend volume.

Disk Management will not do the extension, but Partition Wizard will do it.

Read other 3 answers
RELEVANCY SCORE 38.4

Have XP. Drive split evenly between C and D. C has 35.4GB Total Size and 544MB Free Space. D has 39.0GM Total Space and 39.0GB Free Space. I would like to create one drive or at least transfer some of space from D drive to C drive. Would appreciate some help in "how to". Thanks

A:How to Merge Partitions to Extend C Partition merge partitions to extend C drive

Windows Vista and newer have built-in tools that can resize volumes. See our tutorial for that here.Windows XP and earlier don't have the tools built-in, so you have to use a third party partitioning tool. We have a tutorial for that, too. This tutorial covers shrinking an existing volume to make space for a new second volume, but resizing two existing volumes is substantially similar.

Read other 1 answers
RELEVANCY SCORE 37.2

Dear guys,

I'm having a hard time of deciding which to buy. A CD-RW or an Iomega Zip 250MB with USB/PCMCIA.

I know a CD capacity is about 650MB vs the Iomega 250mb

Anyone care to share the experience with the 2? Thanks
 

A:CD-RW vs Iomega Zip?

Read other 10 answers
RELEVANCY SCORE 37.2

I have an iomega cd-rw 48x24x48x
It worked real good on my other computer which was a gateway.
Now I have a Hewlett Packard Vectra computer running Windows xp and I can't get it to work on this computer. How do I get it to work?
 

Read other answers
RELEVANCY SCORE 37.2

My parallel port Iomega 100 Zip Drive won't work on Vista.
It reads it as IMG VP1.
Asks for the disk which I can't find.
Any ideas?
Thx,
ZZZ
 

A:Iomega ZIP 100

Read other 13 answers
RELEVANCY SCORE 37.2

I have an iomega external hard drive, or mass storage device. It was working fine and the blue light is still on, however my computer cant see the files. The USB port is working, I tried unistalling the driver and reinstalling, that did not work.
 

A:Iomega down

Try it on another computer and try another USB cable. USB drives frequently break due to the nature of their use, it's possible that either the USB part for the enclosure has failed/broken or the the internal drive has failed or broken. If you want the data off it or want to attempt to salvage it and not worried about warranty then you can disassemble the unit and remove the drive and try the drive internally in a computer, it's just a SATA drive inside, or attempt to use it with another enclosure and hope the drive is not dead.
 

Read other 1 answers
RELEVANCY SCORE 37.2

hi,

i have an iomega cd rw, and i've had it about a year but lately when i try to use it, it says " no supported cd rw available"..

when it happened the first time i just unplugged some wires and put them back in, and it said "new hardware detected" and it worked... but this time that wont work, i've tried going into my control panel and adding new hardware and it says that the iomega parallel port interface is not working properly and i have no idea what that means...
when i check the device tab it has a little exclamatiion point next to it...
i uninstalled the cd rw and all its software and re installed.. i've unhooked it completely and then put it back. and nothing works...
what do u think can be wrong?
 

A:iomega cd rw

Is it a parallel port external burner? If so, is your printer also parallel?
 

Read other 2 answers
RELEVANCY SCORE 37.2

i purchased a usb zip drive by iomega and installed it; i'm running windows 95 and it DID warn me that only iomega products would now work in my usb ports....but i didn't know it would be forever! the zip drive didn't work right so i am returning it and have uninstalled the software, but now my device manager shows NO usb ports at all, and won't recognize the scanner. i un- and reinstalled the scanner software, but no go. i don't want to have to buy windows 98. can anyone bail me out of this one?
~melias
 

A:iomega ate my usb

You probably need to reinstall the Windows 95 USB support.

Get out your 95 CD and do a Find, File on it for USBSUPP - when you find it, double click on it to run the installation.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

Read other 3 answers
RELEVANCY SCORE 36.8

Hi everyone.. i had been using a iomega 320 gb HDD for a few years.. But suddenly it had stopped working.. Whenever i connect it with my Win 7 PC, Windows displays a message that the disk needs to be formatted.. i really did not want to lose data it, but after many attempts to recover my drive i at last made up my mind to format it.. But even after I clicked format after some time it displays a message that the disk cannot be formatted.. So I can neither get my data nor my drive..

So please suggest any software or help regarding this issue..
Thanks in advance,
Sriram.R
 

Read other answers
RELEVANCY SCORE 36.8

I am looking for an external HD. i have found 2 that are at very reasonable prices i just don't know which one is better, or for that matter if either of them are any good at all

the iomega HD is here
http://www.iomega.com/direct/produc...&ASSORTMENT<>ast_id=63191&bmUID=1197410031927

and the LaCie
http://www.futureshop.ca/catalog/pr...665000FS10089693&catid=23795&logon=&langid=EN

so if you could give me your opinions on the 2 drives or any other drives in a similar price range that would be great

thanks
 

A:Iomega vs. LaCie

Read other 7 answers
RELEVANCY SCORE 36.8

driver has not worked for the last 3 months receive a message did not find any iomega drivers on the system after i followered instruction and downloaded iomegware 4.0.2.in device manger i find scsi controller with a minus sign in front of it on the next line i find ayellow circle in front of iomega parallel port interface.in the disk driv i find generic nec floppy disk
generic ide disk type 80
generic ide disk type 40
in hard drive i have ]
intel 82371 ab/eb pci bus master ide controller primery ide controller (dual fifo)
secondary ide controller(dual fifo)
status report on all of the above comes back with a message the device is working properly. in my computer it showes a picture of a zip drive and the letter (d)and under it removeable disk when i clickm on it i receive a message ( D)is not accessible device is not ready os windows 98 internal iomega 100 zip drive
penitium (r)processor
intel mmx (tm) technolgy i appreciate any and all help
160 omb ram
 

A:iomega zip drive 100

Read other 11 answers
RELEVANCY SCORE 36.8

I am trying to connect an external iomega "Home Network Hard Drive" 500gb. I am connecting this drive via usb. The drive is recognised by me PC which has Windows XP Professional SP3 (Local Disk G:\). When i try and see the content on this drive via Explorer I get the following message "G:\ is not accessible
The parameter is incorrect."

I have tried disconnecting and rebooting both PC and HD few times and same above error.

Any idea how I can read the content from this drive? appreciate your help..

Thanks
 

A:iomega external usb HD

Read other 6 answers
RELEVANCY SCORE 36.8

I just installed an Iomega RW external drive with the Hot Burn software supplied. Once I burn data or pictures on a new RW CD I cannot add additional data. The disc shows full even though it is a 700MB disc when there is only a fraction of that amount stored, also I cannot reformat the disc without distroying the disc. My system is xp2000. I have tried everything I can think of, but once I write to the disc I can't add to it or erase what is on it. I am using Memorex CD-RW 4X muti speed disc.
 

Read other answers
RELEVANCY SCORE 36.8

My OS is Win98SE, software is Nero. The Computer recognises the hardware, but the hardware will not accept that there is a RW or R disc ready to be used. Could it be a laser problem? It will read a commercial disc if I persevere. Any ideas please, it is driving me mad. Yes I have spent hours with the Iomega helpline and still no luck.
 

A:Iomega CD-RW (40x12x48

Sounds like a aspi layer corruption. Try relaoding a aspi layer or use Forceaspi. http://aspi.radified.com/
 

Read other 3 answers
RELEVANCY SCORE 36.8

I have an Iomega 750 zip drive. I have a disk that has become so corrupted that my system will no longer recognize it. This disk is physically all right. I have already lost on the data on it and I don't won't to loose the $15.00 disk too. How do you force a format on this disk so that I can at least save the disk?

Thanks,
Tom Carter
[email protected]
 

A:Iomega 750 zip disk

you should be able to format the disk by opening "My Computer" and "Right-Clicking" on the Zip Drive with the disk in it and choose FORMAT from the menu.
 

Read other 3 answers
RELEVANCY SCORE 36.8

I have an Iomega 160 GB USB HDD that used to work with my desktop but now it only works with my laptop. I backed up my desktop and unplugged it and now it wont recognize it when i plug it in, even with the Y-adapter cable. I dont know if it's a power issue or something else.It works on other computers but not the desktop. please help! I really need it to work because I have to back up some VERY important data that I have to keep for a while.
 

A:Iomega HDD problem

Read other 6 answers
RELEVANCY SCORE 36.8

Using Windows 98 on a PC or laptop my Zip drive will bring up a brochure that needs a bit of work but will not save it ANYwhere. I get a variety of messages including "Disk is not formatted." "Disk is full or damaged."
"Save to another disk." Is the drive dead? Is there a way out with the brochure intact?
 

A:Iomega Zip Drive 250

Anny: Try copying the file from the zip to your hard drive using Windows Explorer. Then try working on it from your hard drive. If you successfully get it copied to your hard drive, I would run scandisk on your zip drive and see if you can't recover that file. If not, format the zip drive, making sure there are no bad sectors (if so, trash the zipdisk), and copy the file back onto it if the zip is still good.

------------------
~dreamboat~
Brainbench MVP for Microsoft Word
Brainbench
 

Read other 2 answers
RELEVANCY SCORE 36.8

I have and Iomega HDD120 External Desktop FireWire/USB 2.0 Drive, and recently it just stopped working. The other day, I got on my pc, and tried to load up my harddrive, and as soon as I powered it on, it started to make a clicking/grinding sound. So, I went to Iomega, called them, and looked at the FAQ, and it said to immediately power it down, as leaving it on could strip the drive. So, I did. I then went to their data recovery site, and they said that it would cost $5,000 to retrieve my data. I don't have that kind of money, is there anyway that I could retrieve it for less money? This has everything of mine since I was 5 years old, so it is really important to me!

Thanks in advance,
-Cameron
 

A:Iomega HDD120

the drive and its contents are gone forever. hard drive crashes are nasty like that.
 

Read other 2 answers
RELEVANCY SCORE 36.8

ok, kinda new at all this...need big help..transfering pic's on to zip disc, disc will not accept any more pics...disc shows 25% used and 75% free...i was told i need to make directories in order to utilize all disc space.....how do i do this?..any help or tutorial sites any one know of?...thanks
 

A:iomega zip100

I have a external zip 100, I just drag and drop, and it works fine, exactly how are you moving files, and have you tried another zip disc ?..post back...Rhett
 

Read other 3 answers
RELEVANCY SCORE 36.8

using 8x4x32 Iomega zipcd cdrw, reads other CDs ok but will not read the Norton Ghost CD. Message is 'cd drive not ready...' .
I've tried several times. Is the CD too advanced for the drive?
 

A:Iomega cdrw

Read other 6 answers
RELEVANCY SCORE 36.8

Hi all,

I want to uninstall this internal Iomega IDE ZIP 100 drive I've got, but I cant because when I try to boot up, Windows says it can't find the selected boot drive. I beleive it is because the drive is partitioned as a Master Boot Record. Can anyone help me fix this, and completely remove the drive?

Many thanks...Blui
 

Read other answers
RELEVANCY SCORE 36.8

Hello,
While browsing the software CD for the Iomega Zip 100 USB, I came across a directory for Bernoulli. I thought that was a whole different brand of drive. I was wondering why Bernoulli was listed under Iomega? Do they have some connection?
Any answers will be much appreciated.

Thanks in advance,
Jenn
 

A:Iomega zip drive

Read other 12 answers
RELEVANCY SCORE 36.8

Hello XP fans!
My friend found an old iomega backup file with the extension .1-Step
I am looking for anyone who might have an older machine (Win XP or even earlier) as well as a ZIP or JAZ drive from iomega with functioning software. I know this is a longshot, but I'm just hoping there's someone out there on one of these forums that can help in any way.
I appreciate any tips you can offer.
Thanks all!
 

Read other answers
RELEVANCY SCORE 36.8

Ok I transferred pics from my iomega to my laptop, and looked through them. When I went back to them it says "the drive or network connection is unavailable, make sure the network is available and try again" When I plugged back into my laptop ....nothing, zilch, nil!! Went to pc world who tested and said power was working- even though it doesn't show a light. I need to recover the pics, pc world will do for a fee of between 90-350. Can I transfer the hard drive to my laptop?? Before anyone asks, stupidly I do not have another back up. O/s windows 10
 

Read other answers
RELEVANCY SCORE 36.8

I just bought a brand new hp pavillion and it won't recognise my iomega ext usb hard drive. All the driver sites just want my money and some are telling me I need to update 11 drivers on my 2013 pc. Please help

A:Can't install my iomega ext hdd.

Welcome to EightForums,

Take look on the HP web site for up to date drivers for your hp pavillion.

Read other 3 answers
RELEVANCY SCORE 36.8

Hey Everyone,

I have a Iomega 16x10x40 CD-RW and can't seem to get it to work. I plugged it in the USB port and it finds it and asked for a driver. So I went to the web site and this is what they said:
Drivers are not required to be downloaded. All necessary drivers are included in the OS, except for Windows 95/98. This means that your CD-RW drive will be detected as a CD-ROM drive, but you will NOT be able to burn CD's unless CD burning software is installed.

Any Ideas?

Preciate It,
Cybertaz
 

A:Driver for a Iomega CD-RW?

Read other 16 answers
RELEVANCY SCORE 36.8

I have just fitted a new "C" drive and loaded Win XP (used to use Win 98). Now when I open a ZIP disk in an external Iomega ZIP drive a Window opens that displays the contents of the disk.
How do I stop this window from opening?
 

Read other answers
RELEVANCY SCORE 36.8

I have a Iomega Predator external USB cd-rw and I'm running Windows XP Pro(with all the latest patches). When I plug in the CD-RW, Windows detects it and assigns a drive letter. It properly identifies it as a cd-rw. When I place a blank cd-rw in the drive, it changes to just CD drive. When I click on it, I get an invalid function error. What could cause this? I've tried different brands of CD-RW's

Thanks.
 

Read other answers
RELEVANCY SCORE 36.8

I have windows xp but also and internal Iomega 100 zip drive it has always read my disks just fine and will still read all but one, when I open this one that has alot of infor on it ;it is full of little boxes with different letters or signs under it like some kind of code I do not have any idea how this happened or how to fix it. Please help! Thanks
 

A:iomega drive

Read other 8 answers
RELEVANCY SCORE 36.8

I looked and searched, but didn't find the answer to my problem. Maybe I didn't look hard enough, or use the right keywords. In anycase, I have a problem with one of my ZIP disks.

Somehow it's locked, i mean locked and frozen ready for the grave. I dunno how it happened. The other disks work fine, but this one I can't do anything with at all. The drive won't read it, won't even recognize that it is in the slot so I can look at the properties. Is there anyway I can open this disk, or save what files are in there?

Please help. I'm computer inclined, but not a whole lot and I am completely lost.
 

A:Iomega ZIP disk help

Read other 16 answers
RELEVANCY SCORE 36.8

Hello,
I'm a newbie here in need of some assistance. I'm not an amature nor an expert but I have an Iomega 500GB external HD. It has esata and USB connections for it. My PC (Win XP)only takes standard sata, so I'm using the USB connections. I plug it in and it doesn't get recognized in my computer as a second drive. I search the forum and follow similar instructions, but still have no luck.
I know that the USB inputs are good. My goal here is to copy the contents of another external Maxtor Hard Drive to this Iomega HD. The Maxtor plugs in with USB and it shows up in My Comp. I would like to ask what else I can do?
Thanks very much.
 

A:Need help with an Iomega 500GB HD

Read other 7 answers
RELEVANCY SCORE 36.8

As you know I recently installed from Windows Me to WindowsXP Pro, and didn't think about uninstalling some of my programs before doing so. I need help with Iomega Hot Burn now. I get the following message when trying to open Iomega Hot Burn--"Iomega Hot Burn did not detect a CD-R/RW in your system". Also when trying to unistall Iomega Hot Burn the install shield wizard comes up with this message "an error occured while launching setup. Catastrophic failure". What now? Thank you!
 

A:Iomega Hot Burn

Start looking here
http://www.iomega.com/na/products/p...&ASSORTMENT<>ast_id=63191&bmUID=1077602571808
 

Read other 1 answers
RELEVANCY SCORE 36.8

I have an iomega 500gb external hard drive that just recently decided to stop working with my Macbook. It has worked flawlessly for almost a year but last week it decided to stop. It will still turn on whenever plugged in, light on the back will flash and it is not recognized. I can find it in disk utility but it doesn't let me do anything with it. I have tried all the ports with different connections, usb, firewire (both firewire ports) to no avail. Looking for help as there is a lot of important data on here. Thanks in advance for any help.
 

A:Iomega not so Mega

Will it work with any other Computer/Operating System, but not with your Macbook?
 

Read other 2 answers
RELEVANCY SCORE 36.8

After using the Iomega 250 for a couple of years, I changed memory, and video card and extra hard drive. Reloading XP this drive (IMG VP1) does not recognize my 250 drive but will read the 100 disks . Help!

A:Iomega 250 Driver

Check www.iomega.com for any types of "Firmware" or "Driver" updates. If there are two, get both.

Read other 1 answers
RELEVANCY SCORE 36.8

Iomega zip 100 getting "i/o device error". Any suggestions??
 

A:Iomega zip 100 not able to read

I have one. Buy a flash drive and trash the zip. Its 11years+ old anyway.
 

Read other 3 answers
RELEVANCY SCORE 36.8

My Iomega Home Storage NAS is suddenly not accessable. It is formatted in Linux (I believe). Can I in any way connect it via USB as an external HDD and save my files? My computer has Win7 64b. If I try to connect the drive via USB, I cannot see it in "My computer" but it is present in Diskmanager.

Thank you in advance for any help. ELLPER

A:Iomega NAS not accessable.

if its Formatted as Ext2 or something like the windows doesnt support u need a Live CD (As u can get from Ubuntu's website) then connect it via usb and recover files

Read other 4 answers
RELEVANCY SCORE 36.8

Hi,
I have a 1 TB Iomega, usb plus AC plug connection. I was moving my laptop and pulled it off the desk onto the floor. About 2 1/2 foot drop. My win7 pc still shows the drive by letter but when I try to access the drive the pc returns a message the the drive needs to be formatted. The drive contains my movie collection. I don't know how many, but a lot.
I read some of the posts after a search and downloaded Recuva. But it stopped responding once I selected the drive with the browse feature. I then downloaded testdisk but had trouble understanding how to use it. Any advice would be appreciated.
Thank you.
 

Read other answers
RELEVANCY SCORE 36.8

Hi there:

I have an Iomega 100 Zip Drive. Yeah, I know it's a few years old! The reason I still use it is because I have several discs and it's been working- up until now.

Today, I put in a disc and what normally happens is a little green light in the front comes on and begins flashing then the light goes out. That same green lit button is what I can use to eject the disc. Now, what's happening is the light stays on solid green. I cannot eject the disc. And my computer is not even detecting the hardware by showing me the icon when I click on "My Computer".

Is it something to do with my computer? Or the Zip Drive itself? Any help would be appreciated. Thanks.
 

A:Anyone know about Iomega 100 Zip Drive

Read other 11 answers
RELEVANCY SCORE 36.8

Hi All,

I desperately need ask for your help to solve my problems with an Iomega external HDD. As it is right now I cannot use my brave new storage because it simple does not work the way it is supposed to.
I hope we can remedy this problem..

I've recently purchased an 1TB Iomega Select Desktop Hard Drive (PC/Mac) that connects with an USB 2.0 port to my laptop. I have formatted the drive to NTFS.


I have the following issues with the drive:

A, When I'm using the drive under Windows XP SP3, I encounter with the following problems:
I. If I'm downloading several files with torrent (filesize <= 50MB) and the download destination is the Iomega storage, and the download speed is around 2-3 Megabytes / sec, after a some minutes (not more than 30 minutes), Windows XP pops up the following Delayed Write error message:

"Delayed Write Failed : Windows was unable to save all the data for the file [name_of_the_file_you_want_to_save].
The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere."

Furthermore, I cannot access the drive anymore after the error message. The drive seems to be recognized but the folders seem to be empty. If I restart the PC, Windows does not recognize the drive connected.
The drive is recognized again if I disconnect and reconnect the power supply of the Iomega drive.

- I have tried disabling caching (Windows setting fo... Read more

A:1 GB Iomega USB 2.0 HDD errors

Typically I would guess that the drive isn't getting enough power, but since it is a 1TB drive (and there currently aren't any laptop drives that size) that it is a regular full size external with its own power supply.

So given that, I would download SeaTools for Windows and run the short and long DST on it and see if it passes. You've tried the Windows settings I would have also suggested.
 

Read other 8 answers
RELEVANCY SCORE 36.8

Hi all,
I hope you are able to help me.
I have recently bought a new win8 computer.
My problem is that my Iomega NAS disk does not appear on my PC.
I hope you can give me some clues, or (preferable) a solution.
I guess you need some information, but as I am a tech imbecil, I will need you to please tell me what info you need in order for you to help me.

Thanks in advance.

Best regards,

Mikkel Lautrup
Denmark

A:Cannot detect my iomega NAS

What make and model is the Iomega NAS? You might be able to download the software for it here.

Read other 1 answers
RELEVANCY SCORE 36.8

I have an Iomega 120GB fire wire/usb external hdd. It was working fine, i have 2 computers and have been able to use it on both. Usually it just does plug-n-play when i plug it in with usb and brings up the folder for the drive, but today i was sorting some files on it and then i switched it off. A while later i plugged it into my computer and it brought up its usual message "Plugging hi-speed usb device into non-hi-speed usb hub click this message to fix", but this time the hard drive did not show up in my computer and locked up my computer until i took it out of the usb port. So i went to device manager and plugged it in again it now comes up as a usb device instead of a hard drive which it usually comes up as. I tried reinstalling the driver off the disk that came with it but this had no effect . Please help, thanks

Bob Mac
 

A:Iomega 120gb Hdd

The O/S in question would be a big help. Also, did you try the drive on another machine? This will narrow it down to either the drive or something corrupted on your system.
 

Read other 2 answers
RELEVANCY SCORE 36.8

How can I get this old Iomega drive to work on a parallel port with Windows XP? I have downloaded the latest s/w from Iomega... ran the install... rebooted, but the drive is still not recognized? Do I need to "Add new Hardware?"....
 

A:Old Iomega Zip 100 drive...

Read other 11 answers