Over 1 million tech questions and answers.

Missing SD host adapter

Q: Missing SD host adapter

I have an old HP NC6000 which I installed Windows 7 on. I can not get the SD card slot to work. At first it wouldn't see anything when I put a card in. After installing and un- installing several drivers from HP and Microsoft, now when I put a card in it shows up as being able to eject it If I want to. It does not show up in my computer as removable storage or any thing. I noticed in devise manager there is no SD host adapter listed. There is not even a heading for SD host adapter. The card works on my other laptop which is an NC6400. Do I need to install An SD host adapter?

RELEVANCY SCORE 200
Preferred Solution: Missing SD host adapter

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Missing SD host adapter

"I have an old HP NC6000 which I installed Windows 7"...

There is probably no Windows 7 SD host adapter driver for this old laptop. Stick with XP

Read other 1 answers
RELEVANCY SCORE 49.2

Hello guys!We are trying to install a Crucial m500 960Gb SSD into the hard drive bay adapter for the w540.While the drive fits, once it's connected is not snug and kind of "rattles" inside the bay adapter.It turns out that you need one of this little adapter/spacers that are present in the actual main SSD that came with the machine.We've searched everywhere for the part number or even it's name, with no luck.
Here's the picture of the part:
 
Link to image
How can we get one?
Shouldn't this part be included in the Hard Drive Bay Adapter IV?
Thanks so much for your help!Nicolas E.
 
Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules

A:SSD "adapter/spacer" missing in ThinkPad 9.5mm SATA Hard Drive Bay Adapter IV for W540

No one has ever wanted to install a Crucial m500 SSD in the Hard Drive Bay Adapter?

Read other 9 answers
RELEVANCY SCORE 48

Hello
Would someone possibly know whymy sd host adapter works intermittently and only wone of 4 of my sd cards?

Thank you
Douglass

A:SD host adapter not recognizing media

you could try to update the driver. First try in Device Manager and if that doesn't work try going to your adapter manufacture's site for an updated driver. Ask if you don't know how to do that,someone will talk you through it.

Read other 1 answers
RELEVANCY SCORE 48

I was scanning some documents into Adobe Photoshop two nights ago using a scsi scanner and all was working fine, I installed a USB printer that same night then after testing it and was sure all was working I shutdown, but the next night when I went back into adobe photoshop to continue scanning I just get an error message saying;

"error scanner not ready! there does not seem to be a scanner installed. Please check the scsi connection and the scsi Id number"

The scsi Id is "7" and the scanner is a Blackwidow, I think made by Devcom, the interface used for scanning is called widowview, when I click on acquire scanner the Id changes to"0" and just displays the above error message

I looked in the device manager and an exclamation mark is by the scsi adapter & in the device status there is a message that reads;

"This device is using an interrupt request resource that is in use by another device and cannot be shared.
You must change the conflicting setting or remove the real mode driver causing the conflict (code 30)"

I have tried changing the IRQ which is set at (10) but it wont let me, it says windows will manage it even if I untick use automatic settings

I have looked through some other IRQ's and there are two others set at (10) these are pci audio device & IRQ holder for PCI steering, could that be the conflict?

sorry if this is so long but I am trying to give as much info as I can, plus this is driving me nuts!, I nee... Read more

A:scsi Host Adapter, conflict

Read other 16 answers
RELEVANCY SCORE 48

Installing an Adaptec AHA-150X/1510/152X SCSI Host Adapter and everything is working fine except that everytime I reboot i get the following error: "Host Adapter Diagnostic Error press F1 to boot" right after the memory count. This isn't a major problem but I would like it to boot up without having to press F1. The scanner that uses the card works just great, and there are no other noticeable problems. What am I missing here?
 

A:SCSI Host Adapter problems

Well, that usually means that there is some kind of memory conflict with the card.

Maybe with a sound card or modem you have installed... can you try taking out all cards but video and the SCSI? See if the problem goes away? You don't need to let it go into Windows of course - the error happens long before that.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

Read other 1 answers
RELEVANCY SCORE 47.6

I am using Windows XP. I recently installed a new modem. The modem works beautifully, but I cannot print. When I look at the device manager I notice that the Adaptec AHA-1502 SCSI Host Adapter is using IRQ 10 and I/O Range 0140-0154. THe Generic 56K HCF Data Fax Modem is also using IRQ 10 I/O Range EC00-EC07 and Memory Range E9000000 - E900FFFF. There is a check mark on both property boxes for use automatic settings. No Conflicts are listed in the conflicting device list for the modem, but the conflicting device list for the SCSI host adapter lists these conflicts:
Interrupt Request 10 used by: Generic 56k HCF Data Fax Modem
Intel(r) 82371AB/EB PCI to USB Universal Host Controller.
The Use automatic check box is checked but grayed out in the property box for the modem, but is checked and not grayed out in the property box for the SCSI host adapter. Any suggestions?
 

A:Modem Conflicts with SCSI Host Adapter

Hi,

If it were mine I would go to Start, Control Panel, System, Hardware, Device Manager and delete all references to a modem.

Shut down and move your modem to PCI #3 or the third slot down from the AGP slot)

Boot up and enter BIOS setup menu.....when you get there, then go to the PnP area and DISABLE it if you are using WinXP. (If it were Win98, then you would enable it)

Save and Exit and reboot

When it boots, add the latest and best drivers from the manufacturer's website for the modem.

That should solve your problem.
 

Read other 1 answers
RELEVANCY SCORE 47.6

What network adapter settings mean vms can communicate with each other but not with host? Thanks
Vmware Workstation 10

A:Network adapter settings to isolate vm from host

Hi there

Some sort of Switch / subnet probably required here with firewall settings also perhaps to block communications from the subnet.

I think this is more of a Networking issue than a VM one itself. The other question - do you still want the HOST to have access to the Internet.

I've only done this where I've had a SINGLE VM which needed Internet access for a "Dodgy site" --was testing a Virus and so I attached the NIC physically to the VM and disabled networking on the HOST while I was testing.

However if you need Internet and LAN access on the HOST and you have more than one VM running concurrently I should ask the Network gurus as this is outside my area of expertise. I suspect also you might need two Physical NIC's for this - one for the Host and one for the subnet your VM's are on - but I can't give any more help than that.

Try asking @Kari -- I'm sure he's done things like that but he uses HYPER-V which is also a good system if you have W10 pro or Enterprise.

Cheers
jimbo

Read other 5 answers
RELEVANCY SCORE 47.6

I want to connect several VM's mainly Cisco router to same network adapter (vmnet1 host-only network adapter) and want to pass multiple VLAN's as Tagged. I am able to achieve this requirement through bridged network adapter but unable to do so through host-only
adapter. I am using Windows 7 as main OS and VMware Workstation 11.
I have gone through several tech forums but unable to find answer for it. Though in multiple forums one statement was common that Windows will strip the VLAN information when packet received/transmits through network adapter.
I would really appreciate if anyone can help me with this.

Read other answers
RELEVANCY SCORE 47.6

Appreciate some assistance.

Was changing BIOS settings (PnP/PCI Configuration) while installing a modem (IRQ 3 was set to Legacy/ISA), and enabled "Reset Configuration Data". What in the heck possessed me to do that, do not know. Saved changes, exited BIOS, and after
that, got the following message on the screen:
"Host adapter hard reset timeout.
BIOS not installed.
Unable to enable/disable host adapter shadow RAM."

Have a SCSI hd connected to an Adaptec Host Adapter (1540CF/1542CF). Tried Control>A to access the BIOS of the AHA, but NOTHING happened. Needless to say, cannot access the SCSI drive C:/

Did I fry the goose on this one? Needless to say, need some help.

 

A:Host Adapter hard reset timeout?

Can you not get back into the bios??

If not, try taking the battery out and putting it back in and restarting.
 

Read other 3 answers
RELEVANCY SCORE 47.2

Hey guys, quick noob question here..

I'm trying to hook up a new wireless network in my house and bought a new N 300mbps router and an upgraded wireless adapter.

When setting up the router, does it need to be hard connected to a host PC or can it just be connected to the modem only for the network to operate?
I want the modem and router to be off in another room while i connect to it via my new wireless network adapter on my PC. Does the network (router/modem) need to be connected to a host PC to work properly? If this is the case, then i just bought a new network adapter for no reason....

Thanks for any assistance.
 

A:Wireless adapter, router- is host computer required??

Router goes to modem. That's all you need. The only time a hard-wired connection is handy is when you want to change the router's settings or update its firmware, but otherwise it needs to be connected to nothing else.
 

Read other 2 answers
RELEVANCY SCORE 46

Good Morning;

RE: server with an AIC SCSI Host Adapter, on boot goes thru
Channel A ok, then goes to Channel B, makes start-up request of Iomega Jaz IGB, and FAILS...actual chanel B target Id #4 says...."Unexpected scsi command failure ", followed by a bunch of stats (locations). Hardware mgr indicated the Jaz device checks out ok, (Jaz only dvice on B channel but the channel itself indicates its functional)-

Anybody have a suggestion where to begin to look for source of problem? doesnt appear channel corrupt just the jaz device itself, more likely, its scsi channel B settings- any troubleshooting assit would be genuinely apprteciated!

regards
Webz
 

A:[SOLVED] SCSI Host Adapter produces start-up request failure...

Read other 16 answers
RELEVANCY SCORE 46

I installed a PCI firewire card that i ordered, and my computer doesnt boot. It makes a couple of beeping noises (more than usual) and the computer just doesnt boot. I think it might be an IRQ conflict between the PCI firewire card and my new AGP graphics card, because my monitor doesn't work whenever the firewire card is in. These are some devices in my PCI slots: sound card, modem card, and ethernet adapter. Here are the specs: 500 MHz PC, pentiumIII, 512MB SDRAM, Windows XP Pro.

Is there a way I can install my PCI firewire card and make the computer boot? Thanks in advance for any advice.
 

A:Installed PCI 1394 Firewire Host Adapter, computer doesnt boot

Look up the beep codes in your motherboards manual and see what they mean exactly. It can be something as simple as a loose keyboard cable.

You could also try putting the controller in another PCI slot. The first and the last PCI slots are not the best ones to use since usually those share resources with other motherboard devices.
 

Read other 1 answers
RELEVANCY SCORE 44.8

Hi there,

Is it possible to have a missing host file? The computer in question has Windows XP on and does not seem to have one. If it is missing what effect would it have on the computer and how can I add it back if it is definitely needed?

Thanks.
 

A:Missing Host File

Read other 7 answers
RELEVANCY SCORE 44.4

I've run mbam and tdss killer and some other tools as well. I found lots of various infections and malwarebytes removed all the infections. TDSS killer found a rootkit and cleaned it successfully. Nothing weird spiking the CPU, and no suspicious processes in taskmgr. Seems all the dll and app files were removed. I've checked DNS settings and TCP/IP settings and all is well. However, I'm getting lots of google search redirects, I have an idea that's it's all in host file, but hosts is well hidden. HOSTS file does not appear in the drivers/ect dir at all, and yes I have show hidden files and OS files ticked. I've tried searching for in in WINPe environment to no avail. It seems like it's hidden from the Windows file system or something. I'm running WINXP Pro SP3 fyi. Anyone see this before?? The key is how to find the HOSTS file. Once I get there I'm sure I'll find 100+ entries that I can remove and save myself an image restore on this dirty box.

any feedback would be most excellent.

cheers,
expresso.

A:missing or well hidden host file...

http://www.google.com/#sclient=psy&hl=en&source=hp&q=where+is+the+hosts+file+in+xp&aq=2&aqi=g5&aql=&oq=&pbx=1&bav=on.2,or.r_gc.r_pw.&fp=739cf39a78c48e1&biw=1440&bih=699

There may be more than one hosts file, some defense programs install one automatically on the system.

C:\Windows\System32\drivers\etc is the file path for mine, easily found by using the XP Search function.

See first comment by md usa spybot fan at http://forums.spybot.info/showthread.php?t=13977 .

Louis

Read other 1 answers
RELEVANCY SCORE 44.4

Good Afternoon After installing Win 7 (64b) on my laptop , and installing most of the Drivers available for this computer, I noticed that none of the usb hubs worked. I checked the device status on the Device manager, just to find out that The USB Host controller wasnt intalled at all.  This device has the Exclamation mark on it, and I tried to install it with several drivers with no results. Please help me getting the right drivers to enable the USB ports Note: None of the USB Controllers or devices are installed  Laptop :   15-ay008la

A:Usb Host Controller - Driver Missing

Hi: Download, unzip and run the setup application from the link below... https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Control...

Read other 1 answers
RELEVANCY SCORE 44

Hello, I'm not sure if these issues are related but here's the issues I'm having and I cannot find a resolution anywhere. I appreciate the guidance that is provided.

What I noticed in the device manager is the RICOH OHCI Compliant IEEE 1394 Host Controller and the SDA Standard Compliant SD Host controller is that they both have an ! exclamation point next to them. I try to update the driver and it will state that the driver is loaded and working correctly, but still shows up with an exclamation point next to it. I cannot figure out a resolution to this.

Also, I'm not sure if those issues are related to this but I am missing my DVD player. It shows in the BIOS but not in the Device manager or in my computer.

Can anybody provide and guidance on what may be the issue?

I am running Vista home premium on an HP dv6815nr.
 

Read other answers
RELEVANCY SCORE 44

I have two USB ports which recently stopped working.  They are both located on the left side of the notebook. There are two ports on the right side which are operational. The two non-working ports have power can I can use them for charging a device (phone, etc.). However, they do not recognize any USB device. No Errors are emitted but no devices show up either. Device manager reported a controller as having a problem. I unistalled the device (Renesas USB 3.0 eXtensible Host Controller) and then ran a scan for hardware changes. The scan did not detect the controller. I have a feeling this is a hardware failure of the motherboard but am hopeful there may be another solution. Device Manager also reports a problem with USB xHCI Compliant Host Controller  Thanks,John

Read other answers
RELEVANCY SCORE 43.6

hi to everyone, i've this missing drivers and side ports will not work....here is the hardaware idPCI\VEN_1022&DEV_7814&SUBSYS_368717AA&REV_01PCI\VEN_1022&DEV_7814&SUBSYS_368717AAPCI\VEN_1022&DEV_7814&CC_0C0330PCI\VEN_1022&DEV_7814&CC_0C03 thank you for you time

Read other answers
RELEVANCY SCORE 43.6

Hello everyone this is my first post, this issue arose about a week ago when i was trying to get a memory card reader to function at full speed.

I decided to uninstall all USB controllers from my device manager and restart the computer, when it came back on it installed the SiS 7001 PCI to USB Open Host Controller, i now have two SiS 7001 PCI to USB Open Host Controller in device manager and a few usb hubs, but i cannot get back the SiS 7002 USB 2.0 Enhanced Host Controller. I was running windows XP SP3 but have reverted back to SP2 in attempt to have the drivers reload. No success yet.

In the BIOS, USB 2.0 Host Controller is disabled because when i enable it i have no functioning usb ports on my PC, i am guessing becuase there is driver for it. I have tried downloading a number of USB 2.0 drivers but i keep getting the message that i cannot install them because i am not using XP SP1.

I am racking my brains on what i can do aside from a format, attached is my Everest information, i hope someone can help me correct this issue.

--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------

Version EVEREST v2.20.405
Homepage http://www.lavalys.com/
Report Type Quick Report
Computer KANEPC
Generator Kane
Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
Date 2008-06-17
Time 11:30
--------[ Summary ]----------------------------------------------------------------------------------------------... Read more

A:Solved: SiS 7002 USB 2.0 Enhanced Host Controller Missing

just an edit, i said usb 2.0 enhanced controller is disabled in bios, that is incorrect,

USB 2.0 support is disabled because when its enabled i have no working usb ports
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hello,Because of a FireWire issue, after researching the web, most solutions point to installing the "Legacy" 1394 OHCI Compliant Host Controller.But as per the instructions I have seen...
Right-click on IEEE 1394 Bus Host Controller.
Select Update Driver....
Select Browse my computer for Driver Software
Select Let me pick from a list of device drivers on my computer

In the list there is supposed to be an option for 1394 OHCI Compliant Host Controller (Legacy)But for some reason on my computer & another 1 I tried that option is not there.  How can I get that option to appear ?  I must choose that Legacy one !
Mine & the other machine I tested both have Vista Ultimate 64bit...Any help would be greatly appreciated !Thank youJeff

Read other answers
RELEVANCY SCORE 42.4

I just installed windows 8.1 pro on an MSI z97 pc mate motherboard with I5 3.3 ghz processor, 16 gb ddr3 1600 MHz ram, with embedded realtek pcie gbe NIC. I checked and found that hardware virtualization is enabled by default in the BIOS.

I tried to set up a virtual switch using the latest bios and drivers from MSI. I created a virtual switch choosing the external option and the share with host OS option. I then connected to the VM. No network connectivity on VM but host still worked.

I then used autopatcher to update windows 8.1 on the vm. I removed and reinstalled the virtual switch choosing external option and share with host OS option. Same conditions occurred.
And then I installed the latest NIC driver. Same problem - media disconnected.

I tried this process with the latest driver from the realtek website which was a couple years more up to date. I had such high hopes! Same problem.

I then used msconfig to prevent all non-Microsoft services from starting and rebooted. I removed and recreated the switch and I was still hoping for success. Same exact conditions occurred.

These are the conditions that occur whenever an external switch with host os sharing enabled is installed in between all of these troubleshooting steps. It looks exactly the same every time...
The host machine can still access the network but it does so through the virtual switch. Ipconfig /all on the host reveals the following...
Microsoft Windows [Version 6.3.9600]
(c) 2013 M... Read more

Read other answers
RELEVANCY SCORE 42

Hello - I am running Windows Vista and just in the past few weeks I have noticed that drivers for my Bamboo tablet and HP AIO printer are missing - software utilities are there, but no drivers.  In addition, I use GoToMyPC to access this Vista system
remotely and I have to continually reinstall the host software.  I don't know if this is a problem with Vista or with Webroot Antivirus.  I have disabled my firewall and persists, so I don't believe it's a firewall issue. Please help.

A:Tablet and Printer Driver, GoToMyPC host software missing/deleted in Vista

Hi,
What will appear when open Device manager?
From your description, you mentioned Webroot Antivirus, I would suggest boot into clean boot to have a test.
To place the computer in a clean boot state, follow the steps below:
1.     Click Start, type msconfig in the Start Search box, and then press ENTER. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
2.     On the General tab, click Selective Startup.
3.     Under Selective Startup, click to clear the Load Startup Items check box.
4.     Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.
5.     Click OK.
6.     When you are prompted, click Restart.
7.     After the computer starts, start the installation and check whether the problem is resolved.
If possible, it is better to uninstall Webroot Antivirus and check.
Regards,Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 2 answers
RELEVANCY SCORE 41.6

Im running 2 64-bit Windows 7 computers. My host computer, which is my primary, I have connected to a second computer. I connected them using a standard ethernet cable and only my host has Internet connection. Can someone give me a brief step-by-step explanation on how to get both computers connected to the internet? I know this is probably very simple but I don't know how to correctly word it on google/youtube. o.o
Thanks!
 

A:Connecting a 2nd computer to a host computer w/ network adapter.

Using ICS (Internet Connection Sharing)
 

Read other 1 answers
RELEVANCY SCORE 41.6

Dear All,

I have a Win 7 install on my Desktop. This PC has some shares containing video files I watch on my TV using the WDTV Live media player. This worked until I installed VirtualBox on this Desktop. In that case, the shares are never visible to the WDTV Live. I then found this

Troubleshooting Windows File Sharing.... - Western Digital Community

thread about Windows networking and discovered that my desktop with the shares does not have the ..__MSBROWSE__. listed by the nbtstat -a <computerName> command. VirtualBox installs a host-only network adapater used for shared folders between host and Guest OS. Disabling this adapter fixes the issue:

Fix Slow Windows Networking Problems When VirtualBox is Installed | Scottie

Hope you are still following. What I would like is a working network and shared folders. Is there a way to "force" ..__MSBROWSE__.? What setting in the host-only adapter could affect this?

A:VirtualBoxs host-only adapter and "MSBROWSE"

What happens if you change it to Bridged?

Read other 7 answers
RELEVANCY SCORE 41.6

I have a laptop that I just dug up at my father's office. It's nothing special, a 133 MHz Pentium with 32 MB of RAM. Since I don't have a broadband connection at my house, I was thinking of using it at friends' houses and hooking up to their routers for downloads. However, I'm missing an adaptor that plugs into my PCMCIA card. Can anyone tell me where I can find one?

Network Card: 3Com EtherLink III LAN/33.6k Modem Combo
Interface: PCMCIA
Model No: 3C562D
 

A:Missing Adapter

I looked around but can't find the dongle but you can buy a new PCMCIA ethernet card for $10-20 (probably as cheap as buying the dongle by itself!).
 

Read other 1 answers
RELEVANCY SCORE 41.2

I had a virus and i tried removing it and when i removed it, it also removed the network adapter is there a way to download it offline

A:Missing Network Adapter

Visit your manufacturer's website, find the support section and go to their driver downloads area. You will need to search by model number and you should find the driver you need. If you can provide me with your model number, I can track that down real quick.

Read other 2 answers
RELEVANCY SCORE 41.2

Hi, I need urgent help please. So I installed windows 8, I originally had windows 7 home premium. I dint have a win 7 disk so I had to download a torrent and install win 7 again, it all went well until I tried connecting to my wifi. It's says "Windows could not find a driver for your network adapter" it's been like this for weeks, what can I do ?! Please help. I'm using a Toshiba satellite A665 - S6050 windows 7 home premium x64 bit.

A:Network adapter missing.

Hello CrazyMexican, and welcome to Seven Forums.

You can get the latest "Wireless Networking" (product family) "Intel WiMAX" (product line) drivers at the link from Intel below.http://downloadcenter.intel.com/Default.aspx?lang=eng
You can also find drivers for your laptop at the Toshiba link below.Model Content Page
Hope this helps,
Shawn

Read other 7 answers
RELEVANCY SCORE 41.2

Hello all, I can't detect internet on my laptop. When I go to the bottom right internet icon, there is a red x through the icon. After some browsing through the internet, I've found that what helps some people is going to computer-> manage -> network adapter and deleting the adapter. For me the Network Adapter isn't even there, and under the tab "Other devices", the terms "Ethernet Controller", "Network Controller", "PCI simple communications controller", "SM Bus Controller", "Universal Serial Bus (USB) Controller", and "USB2.0-CRW" all have a yellow sign with an exclamation symbol on them. I know this isn't a problem with my wifi, as it works fine with my other laptops.

Thank You

A:Network Adapter Missing

Hi Welcome to Seven Forums .. Please fill in your System Specs ... The Link below will help you achieve this ..

System Info - See Your System Specs
Could you also please the exact Model Number of your Dell Laptop ...

Read other 9 answers
RELEVANCY SCORE 41.2

A friend has a laptop and the network adapter has suddenly vanished and windows can not find any networks now. I have found the actual adapters in device manager, they were hidden, but they all say they are working correctly. The adapter doesn't show up in the networking and sharing centre where it should be. Only the ethernet one does.

A:network adapter missing

Please try to uninstall in the Device Manager then reboot and reintall the Network Adapter.

Did that solve the problem?

Read other 2 answers
RELEVANCY SCORE 41.2

My computer wont connect to my wireless, due to the "adapter driver missing? I searched google and I don't know what to think lol....any advice how to resolve this?
 

A:ac adapter driver missing?

Read other 11 answers
RELEVANCY SCORE 41.2

Hello My Laptop in the past (when I first bought it ) for a year total it never had any issue what so ever with the wifi nd its adapter. Now a 2 years has passed and for the last few months my laptop has all of a sudden started losing its network adapter In my device manager, my network adapter to have wifi is Realtek RTL8188EE 802.11bgm Wifi-Adapter ok so most of the time when I restart my laptop the wifi is not showing up. Instead it showing up as a Ethernet not connected symbol . I go into my device manager and go to "Network Adapters" And my  Realtek RTL8188EE 802.11bgm Wifi-Adapter. Only my Realtek PCIe FE Family Controller is left in there.  So then too get my wifi back I did a bunch of diffrent command promts driver install from the HP site. It only somewhat helped.  Such as doing sfc/ scannow and netcfg -v -u -dni_dne Sometimes just sometimes it works hen I restart my laptop. Then another soultion i did was to compltetly shut down my laptop and take out the battery and hold down the power button again to drain the battery. And this soultuion seems to be working so far but i dont know if this will keep working.  Another soultion that i tried was to do a system restore which failed. I also done a complete PC restore. In this case a laptop restore to all its facotry settings. And returing to its original windows OS and the problem IS STILL THERE D: All this is just temporaily soultion to restoring the netwo... Read more

Read other answers
RELEVANCY SCORE 41.2

my Hp pavilion p2-1113w says windows did not detect a network adapter if you have a network adapter you may have to re-install the driver and I can't even get online to do any updates or anything else and it's connected to my internet modem through ethernet and still nothing I even restored it to out of the state box and still it says the same thing help please.

Read other answers
RELEVANCY SCORE 41.2

Am unable to get on line with ZT desktop. The ethernet adapter is no longer listed in the device manager. Just the controller. When I ping yahoo it goes out and comes back with no packet loss. In my LAN properties it shows "connected". My laptop works perfectly on that same connection in the wall. I do have a "192.xxx" IP address because it is connected to a router also.
 

A:Ethernet Adapter Missing

Read other 6 answers
RELEVANCY SCORE 41.2

Hi,

I was working on my network configuration, when I deleted my dialup adapter. I searched the windows 98 CD and could not find the adapter. I must be missing something here. How can I re-install the dialup adapter without reloading windows 98? Thanks in advance for any help you can give.

Alderman
 

A:Missing dialup adapter

Read other 8 answers
RELEVANCY SCORE 41.2

i have a toshiba satellite L305-S5919, i cant find anything that can help me either re-install the driver or card not sure what it is, or anthing to maybe update what i might have.

i also currently cant get internet on that computer and am using my sisters right now. i have been downloading and saving to mem. card then installing on the other computer.

anything would be helpful and greatly appreciated!!

thx in advance
 

A:My vga graphics adapter is missing

there are known issues with this laptop and Nvidia graphics processors installed on them. You need to take the laptop to someone capable of circuit board level repairs as in many cases the chip will have to be re-flowed.
 

Read other 6 answers
RELEVANCY SCORE 41.2

My Hp laptop does not shows the wireless adapter in my network and sharing folder how can i fix it? i cannot connect on my wifi because of it . i'll try system restore but no work at all thanks for the answer
 

A:Wireless Adapter is Missing

can we see a device manager screen shot
------------------------------------------------------------------------
Device Manager
Post back the results in device manager
You will now need to take a screen shot and copy that back to the working PC.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the screen shot and attach the screen shot in a reply on the forum here.

how to access device manager for different windows versions
http://www.computerhope.com/issues/ch000833.htm

Hold the Windows key and press Pause key, should open to allow device manager to be seen, menu on the left hand side

on a laptop you may need to use Hold the Windows key and press FN key + the pause key

if the above does not work then -

Windows 7 or Vista
Click on the Start Orb > In the Start Search box type > device manager and then press enter
or
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
start > control panel> System and Security> Device Manager

Windows 8
If you happen to be using a keyboard with Windows 8, the quickest way to open Device Manager is via its shortcut on the Power User Menu, accessible by pressing the WINDOW and the X keys together.
If on a touch screen - have a read here http://pcsupport.about.com/od/windows-8/a/device-manager-windows-8.htm

once you are in device manager then

ne... Read more

Read other 1 answers
RELEVANCY SCORE 41.2

I have a HP Pavilion dv6000 laptop and recently my wireless adapter has gone missing. When I went to check my adapters there was a new one called KHAAAANNNN. I think this may be a virus of some sort and was wondering if anyone knows how to get rid of it and get my wireless working again. I'll add as much information as I can. I've run numerous virus scans and I'm trying to get rid of this problem without needing to format my computer.

ipconfig /all:
C:\Users\Jebus>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Jebus-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TAP-Win32 Adapter V9
Physical Address. . . . . . . . . : 00-FF-4E-AE-55-CA
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hamachi Network Interface
Physical Address. . . . . . . . . : 00-23-C3-A6-65-27
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 5.166.101.39(Preferred)
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Lease Obtained. . . . . . . . . . : Sunday, July 18, 2010 6:06:3... Read more

A:Missing Wirless Adapter

Read other 16 answers
RELEVANCY SCORE 41.2

So my only network adapter showing under device manager is the Realtek PCIe FE Family Controller.

No matter what I do (numerous restarts, run as administrator, etc) I cannot get the WiFi adapter to download from the HP site.

I have an HP G6-1b79dx Windows Professional x64.

A:WiFi Adapter Missing

Hi there .. Can you download any thing from the net .. Or is it just the HP website ?

Read other 9 answers
RELEVANCY SCORE 41.2

Hi there ive just started getting this problem with my pc,every time i try to connect to the net is closes internet explorer down,this just happened the last few days now i cant get on the net with that computer,it was doing it every now and again but now it is perminant,a message did appear saying no network devices have been found ?? also it says that i should enable my network adapter/ any suggestions will be grately appreaciated,i have tried my broadband provider and they say its not my modem,and that it is more lickly to be a IT problem.:grinthumb
 

A:Network adapter is missing

How are you connecting to the Internet
{cable vs dsl modem vs dial-up}?

who is your ISP?

What is the make/model of your Modem?

What is the version of Windows you are using {XP, Vista, Win7}?

The SP level of it?

The Edition { home, pro, starter, ultimate, ... }?
 

Read other 1 answers
RELEVANCY SCORE 41.2

Hi All,

It's my week for computer mess-ups.

I'm missing my 'TAP-Win32 Adapter V9'. I recently, uninstalled a VPN client and it was removed with it.

I realise if I install another VPN, if will re-install. However, do I need it if I don't install another VPN?

Thanks, ms

A:Missing 'TAP-Win32 Adapter V9'

TAP-Win32 appears to be a virtual tunnel adapter used by some VPN clients to access other LANs. If you're not using VPNs then you won't need it. In all honestly each VPN client uses its own secret sauce so I wouldn't worry too much over it and when installing a different one it'll probably make a different one for it to use rather than rely on this mystery tunnel adapter.

Josh

Read other 6 answers
RELEVANCY SCORE 41.2

Okay so here's the story. My laptop recently broke so I decided to use my old desktop. However the desktop was Windows Xp and lagged a lot so I upgraded it to Windows 7. Sadly after upgrading I am encountering a network adapter cannot be found problem and I have been looking everywhere online on how to fix it.
Note: The Internet on it worked fine before I upgraded to windows 7.

Here are some screenshots:
Computer Info: Windows 7 Service Pack 1 64 bit
Ram: 512 mb
Brand: Hp
Model: A810n
Link to drivers for this computer: Software & driver downloads HP Pavilion a810n Desktop PC | HP? Support
I'm pretty sure it has to do with the drivers so if anyone could be kind enough to tell me which specific drivers that would be great

A:Network Adapter missing

Hi Welcome to Seven Forums .. Read the Link below should be of some Help ...

Pavilion a810n drivers for Windows 7 - HP Support Forum - 3604141

Read other 3 answers
RELEVANCY SCORE 41.2

im using acer aspire one running xp. my wireless connection works fine before but for some reason it disappeared. hopes this info could give you an idea how to help me solve this problem.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Cristina Reyes>IPCONFIG /ALL

Windows IP Configuration

Host Name . . . . . . . . . . . . : acer-295bfd4bb2
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR8132 PCI-E Fast Ethernet C
ontroller
Physical Address. . . . . . . . . : 70-5A-B6-1E-30-92
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.254.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.254.254
DHCP Server . . . . . . . . . . . : 192.168.254.254
DNS Servers . . . . . . . . . . . : 192.168.254.254
Lease Obtained. . . . . . . . . . : Monday, September 19, 2011 9:32:20 P
M
Lease Expires . . . . . . . . . . : Tuesday, September 20, 2011 9:32:20
PM

C:\Documents and Settings\Cristina Reyes>
 

A:wireless adapter missing!

Read other 11 answers
RELEVANCY SCORE 41.2

hello i am looking for help.
when i try to connect to internet i get error message this computer does not have a network adapter installed and configured. i have opened device manager and there is no dropdown for network adapter, it was working fine untill this morning my computer is packard bell imedia x2414 with windows vista x 86 i previously had router connected with xbox 360 connected by wired connection and was working fine and upgraded my graphic card to nvidia 9400gt. i took 9400gt graphic card out and reverted back to original and that was when problem started.
can you please help
any help would be appreciated
thank you.
 

A:missing network adapter

Read other 9 answers
RELEVANCY SCORE 41.2

Hi,

I just reinstalled Windows 7 Ultimate x64 and for some reason, I am missing one of my network adapters. I have had this system up and running before and I use the second adapter to stream media to my PS3 - so it is essential to me! I've done a Windows update and checked to make sure both ports were enabled in my BIOS, which they were. I've attached a screenshot of my device manager. Prior to my reinstall, it said "Realtek PCIe GBE Family Controller #1" and "Realtek PCIe GBE Family Controller #2." Any suggestions on how to fix this would be EXTREMELY grateful. Thanks.


-T

A:Missing Network Adapter? Please help!

hello trident.

can you check at msinfo32 > tab component > network > adapter
post it and let we see.

Read other 8 answers
RELEVANCY SCORE 41.2

My girlfriend has an Emachines P3104 - AMD Sempron 3100+ 1.80GHz 1gig ram, xp pro sp2. At some point recently her teenage boys took it upon themselves to install a 2nd hard drive that they found in another Emachines that no longer worked. Shortly thereafter the standby button became greyed out and that function no longer worked. Then we could not get the computer to recognize or install the printer. Due to these and other various problems that accumulated over time, we decided to re-install the o.s. Everything went fine except that even with a fresh install, the device mgr does not show any display adapters listed, nor did reinstalling solve the "standby" button problem. (ACPI?) The symptom is that the display will not open or shut a page normally rather it seems to "scroll" in a jerking fashion. Plus the sound does not work either. I suspect these problems are all related (on a technical level) but am not sure. If anyone has had these problems, or not, but has any suggestions they would be greatly appreciated. Happy New Year
 

A:Missing Display adapter

You need to find the drivers. Non-ACPI-compliant drivers will also prevent stand-by from functioning. Use these apps to get details on what adapter you have and what mainboard you have so you can install its chipset driver.

PCWizard
System Information for Windows (SIW)
Belarc Advisor
Mitec System Information
 

Read other 1 answers
RELEVANCY SCORE 41.2

I have been using Windows 10 with my laptop without any problems until today.I closed my laptop lid and allowed it to hibernate and on resuming it no longer has a WiFi adapter.I checked device manager and it's not present.I tried to reinstall with the original drivers that are supplied with the laptop and it complains with the error: Error "update.cpp 1185" has occured and Setup cannot continue.Any ideas would be welcomed on what I can do to fix this. 

A:WiFi adapter missing

Hi there @bradley568,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand you are having an issue with the WiFi adapter. I will be glad to help you. Here is a some document to help.Troubleshooting Wireless Network and Internet (Windows 10)Sleep and Hibernate Issues (Windows 10, 8) Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution". To simply say thanks, click the Thumbs up below! Thanks.    

Read other 2 answers