Over 1 million tech questions and answers.

Monitors no longer receive signal after unplugging and plugging memory back in

Q: Monitors no longer receive signal after unplugging and plugging memory back in

I went to start up my computer earlier and it would not boot up properly. Looking online someone mentioned it could be faulty memory. So one by one I took them out and started up the computer to see if it would boot with potentially removing a faulty memory stick. None of them seemed to be causing a problem so after installing all the memory back properly, neither of my monitors no longer receive a signal.
 
I have tried reconnecting everything and checking all connections. I have tried turning off the computer and extracting the CMOS battery for 30 seconds. Not sure what they next step in solving this is.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Monitors no longer receive signal after unplugging and plugging memory back in

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 90.8

I have the Hyperx Cloud and the microphone easily unplugs from the headphones so that you can choose to not have a mic some times. While I was talking with my friends on skype and needed to mute the mic quickly so I just pulled out the microphone and when i plugged it back in it didn't work. I have googled many solutions but nothing seems to work.
 

A:Simply unplugging my headphones and plugging them back in seemed to break them. HELP!

Do the speakers still work after you have unattached /reattached the mic?

Presuming you are running Windows (as you haven't specified)

Open control panel, then open Sound (depending on your OS and view options you may need to click on the Hardware and Sound option first or similar)

In the sound window, click on the Recording tab.

With the Mic attached how many devices do you see?

Is the Mic on your headset set as Default?

If you remove the mic and reattach (with the sound window open) does the mic get recognised and show back up in this list?

Does it remain as default / enabled?
 

Read other 1 answers
RELEVANCY SCORE 80

Video card is capable of using dual monitors. Has been connected to two monitors recently without an issue. Bought two new monitors and rearranged everything. When computer starts up, the splash screen comes up on both monitors, and even the Windows XP screen comes up, but before finishes booting up, one monitor goes blank and says "no signal". The other performs normally. I've tried switching which input on the video card each one is connected to (and thus tightening the connections), and the same thing happens, just in reverse (as in the opposite monitor goes blank). Any suggestions?
 

A:Solved: Dual Monitors - Only one will receive signal

Read other 6 answers
RELEVANCY SCORE 73.2

Getting ready to do the install on my new SSD with some trepidation. I have Raptors in Raid 0 right now and would like to simply unplug them, set the BIOS to AHCI and use the 0 port for the SSD experiment/potential fiasco. What I hope to be able to do if the SSD doesn't like me, is to unplug it, set the BIOS back to Raid, plug in the Raptors and pretend the whole thing never happened. Does this stand a chance of working?

A:Plugging and Unplugging!

I wouldnt unplug the raptor raid - if you use intel raid (the one i'm sure of and probably similar, or the same for others) when you enable raid in the bios it also enables AHCI - so you should be good to go with testing the ssd drive - just unplugging a raid array can be very hard to set up again - i did it years ago and it was a miracle i got it back up and going again (that included reinstalling the OS) so not recommended - it also depends what options are available in the raid rom (i think its called) which you set it up in before you install the OS. From memory, which is bad, the problem was it couldnt recognise one or both the drives.
It depends on your motherboard I guess but for mind it should be ok - running raid and using the same controller to use a ssd drive in AHCI mode - but treat this as my opinion - you should be able to find information on your motherboards site, or intel etc's, site. Or wait for more replies as Im uncertain and more repies means more suggestions.
If it has 2 controllers eg intel and jmicron use the JMICRON if it supports AHCI to be on the safe side.

Read other 3 answers
RELEVANCY SCORE 72.4

Hi everyone, hope this is a good year for all. I just picked up a new computer running xp. It came without a floppy drive, so I picked up a portable external usb floppy drive. Is it ok to plug in, and unplug the floppy to the usb port with the computer on? Thanks for the tips/advice.

Regards
IMP49
 

A:Plugging in and unplugging a usb device

Read other 8 answers
RELEVANCY SCORE 71.6

My problem is this, my motherboard is Biostar TP67B and I have downloaded the sound drivers from the manufacturer website which is realtek high definition audio.However, If i had left my headphone plugged into my front panel jack and when I restart my computer, the headphone icon keeps flickering saying its plugged and unplugged constantly when it is in fact plugged in. I had tinker around a little bit and I have no idea how to fix this problem now. Its going bad to worse as it unplugs itself randomly now. I'm trying to go for a full reinstall of my sound drivers.

A:Headphones Plugging and Unplugging constantly bug

Have you tried a different headphone? Maybe the headphone and not the PC or headphone jack.

If not the headphone, check the connection from the front panel at the motherboard, May be a bad connection there. Reseat (unplug then plug back in) the connector at the motherboard. If it still has problems I would suspect the front panel headphone jack, or the wiring.

Read other 9 answers
RELEVANCY SCORE 71.6

Hey guys. I ran into a little problem recently, and would like to share it.
I know it is supposedly ok to plug USB cables in and out while the computer is on, but, to be safe I have always gone through the Safely Remove Hardware icon.
For some reason, though, I have always felt it is safe to just plug sound devices in and out with no regard to whether the computer is on or not. Have done this for years.
However, I noticed a few days ago that one channel of my onboard sound line input had quit, on my newest MB. I did not realize this for awhile, because somehow the system had just rerouted the one channel into both sides, when writing to the CD or DVD. (I noticed that Joe Walsh appeared to be playing an unplugged guitar on the Eagles Hell Freezes Over concert after transferring from my old VHS tape to DVD, even though both speakers were working! LOL)
Anyway...I fixed the problem by just installing a sound card. (by the way, even a cheap $14.00 sound card is at least as good as most onboard sound: mine sounds much better than the original.)
So, would you guys advise having the computer turned off, even to plug in headphones, for instance?
 

A:Plugging/unplugging sound devices

No, 1/8" jacks can freely be plugged/unplugged while the computer is on, and when you're outputting sound.
As to why the jack went dead, cou÷d've been just natural death of age, removing the plug at an extreme angle and damaging the jack, etc...
 

Read other 1 answers
RELEVANCY SCORE 71.6

Everytime I plug or unplug my charger from my notebook, the brightness keeps changing?!?!?  Its very irritating and I've tried everything to try to fix it including going to the advanced power settings and turning off the "enable adaptive brightness."  Nothing has worked, please advise.

Read other answers
RELEVANCY SCORE 71.6

Hi, just bought the 2-1 laptop last week. I want to enable a notification sound while plugging in the charger and also when I'm unplugging it. I've checked the device sound properties but don't seem to find it. Please help ! vsen

Read other answers
RELEVANCY SCORE 70.8

Hi all,

Acer 7740g, Windows 7 HE.
I have this annoying problem that when my AC power is plugged or unplugged it makes a beep.
Muting the sound completely helps, but that's sometimes not an option.

I tried the following and no luck:

Editing a registry entry HKEY_CURRENT_USER\Control Panel\Sound\Beep and changed it to "No".
Uninstalling the Beep device from my device manager.
Turning off my pc speaker, unfortunately, I didn't find where I can disable it.

My sound card drivers are: Realtek 6.0.1.5969

Anyone has another idea?

Thanks.
 

A:Annoying beep when plugging/unplugging AC Power

This forum is for "Business Applications", not hardware problems.
Please post on the correct forum which is "Hardware" here: http://forums.techguy.org/19-hardware/
 

Read other 2 answers
RELEVANCY SCORE 70.8

Hi. I have problem with my mouse and keyboard, they are unplugging. I read many tutorials here, but nothing helped me. Mouse and keyboard are randomly unplugging and plugging, but after this they are unplugging and I must restart computer. Its ridiculous because usb headphones are working. Problem started when I had Windows 8.1, after I formated to 7, now I have 10, and problem is still. I tried some other mouses and keyboards, but didn't helped. I changed some hardware, but didnt helped too. I found something strange. My standard mouse and keyboard are turning off and I must restart computer, but new set is unplugging and plugging sometimes before turn off. Help me please (sorry for my english)

My pc:
cpu: i7 2600k with box cooler
mobo: Asus Maximus IV Extreme-z (before I had ASRock p67 pro3 b3)
gpu: Gtx 660 Msi (before Radeon R7 260x oc)
hdd: Seagate ST1000DM003 and Seagate ST500DM002
psu: Thermaltake smart se 530w (before chieftec gpa-500s8)
case: SilentiumPc gladius 800
ram: 6gb - 2x2gb samsung 1x2gb kingston
 

A:Win7/8.1/10 Mouse and keyboard is unplugging and plugging

Have you made sure that you have the latest drivers for your motherboard? Also what keyboard and mouse? And are you getting any notification on screen when they disconnect?
 

Read other 2 answers
RELEVANCY SCORE 70.8

Hello, I've noticed that my computer crashes everytime i unplug or i plug in and USB drive. Today I bought a new USB mouse and when I connected it no crashes were seen, but when my pc installed the last driver, the BSoD appeared once again. I'm using Win7 64b and I really don't know what can I do, I've tried everything like uninstalling all USB drivers and recreate the INFCACHE.1 file, but still nothing. What can I do to solve this?
Thanks in advance.

A:BSoD when plugging/unplugging USB and when installing USB drivers

1) Does it happen with all usb devices or only the mouse?
 
2) Does it happen with all usb ports?
 
3) Does it happen in safe mode?
 
4) Look in device manager - are there any yellow or red symblos?
 
5) Download and install the newest chipset driver for your system. If it's a laptop, get it from the website of your laptop manufacturer. If it's a desktop, you can get it from either the desktop or the mobo manufacturer's website.
 
6) Look for a bios update.

Read other 5 answers
RELEVANCY SCORE 70.8

Hi all,

I'm at a dorm room with cable internet. It usually works fine, but now if I unplug it, then plug it back, the computer doesn't connect to the internet anymore. Sometimes it says it's acquiring network address, but that doesn't change. The computer connects to the internet fine if I turned on the computer with the cable already plugged in.

Another computer doesn't have this problem with the same cable, always able to connect after being unplugged/plugged. Both computers are on Win XP.

I suspect the Windows firewall has something to do with it, if only because it is turned on the the problematic computer, and not on the other one. I couldn't turn it off, however, because it doesn't let me open up Windows Firewall Settings, giving me the message that the "associated service is not running" and whether or not I could like to start it. If I click "Yes", it simply says it "cannot open Windows Firewall/Internet Connection Sharing service".

Please let me know what the problem might be and what i can try to get it working again. I hope I haven't given too much useless information.. haha. Thanks!

Dave
 

A:can't connect to internet after unplugging then plugging cable

Read other 13 answers
RELEVANCY SCORE 70.8

I want to disbale the beep tone that sounds when plugging / unplugging the charger. I tried all the methods I could find online, but either those options are not available in this model or did not work. Please guide me in this regard. Its really annoying and distracting in a library or classroom setting. The OS I am running is Windows 8.1.

Read other answers
RELEVANCY SCORE 70.8

Hi all,

Acer 7740g, Windows 7 HE.
I have this annoying problem that when my AC power is plugged or unplugged it makes a beep.
Muting the sound completely helps, but that's sometimes not an option.

I tried the following and no luck:

Editing a registry entry HKEY_CURRENT_USER\Control Panel\Sound\Beep and changed it to "No".
Uninstalling the Beep device from my device manager.
Turning off my pc speaker, unfortunately, I didn't find where I can disable it.

My sound card drivers are: Realtek 6.0.1.5969

Anyone has another idea?

Thanks.
 

A:Annoying beep when plugging/unplugging AC Power

Read other 8 answers
RELEVANCY SCORE 70.8

Is it safe to unplug my mouse and then plug it back in again into it's USB port without shutting down my laptop?

Is it safe to plug in my laptops power cord while my laptop is running without shutting down first?
 

A:Plugging in and Unplugging cords while laptop is running?

Yes and yes, except if you are going to unplug the power cord do it from the wall socket first and be sure you have plenty of charge on the battery.
 

Read other 2 answers
RELEVANCY SCORE 70

Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn?t seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.

Currently I am seeing these BSODs:


I am getting one when just trying to start and run windows I am getting a BSOD about memory management.


If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys.
Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.


Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.

I was able to run a mem test on it at one point and it said everything was fine. I would appreciate any help or advice you can give me since I can?t even get to a command prompt or safe mode.

A:Multiple BSODs after unplugging and plugging in flash drive.

If you would like for us to be able to effectively help you, we will need you to follow the Blue Screen of Death (BSOD) Posting Instructions Please be sure to do each step, as outlined in the tutorial. By doing this, we will have the necessary information to help you.

Read other 1 answers
RELEVANCY SCORE 70

Hi All! Been a while since I've posted, but sitting here reading other's posts, I almost forgot why I logged in!

I have a weird problem with my computer.....a little background:
I didn't turn the computer on for a LONG time....perhaps a year, so one day, I decided to boot it up and it won't boot past the post! So I replaced the MB battery, checked the power supply, replaced the memory...and it booted. But then, I turn it off, and it won't boot again...same problem with it not booting past the mem. post. So being that it was an old computer, I figured I'd just build myself a new machine and use the hard drive as a slave. There are programs on the drive that I want to use that I cannot replace! Well, I tried doing that, but the new computer won't see the drive....it won't even boot with it plugged in. So....

I take the hard drive to another machine that I know works fine, and it boots. Problem solved....so I thought. I turn it off, and try and turn it back on.....nothing.....no beeps, no post....nothing. So I tried changing the power supply, and plug all back in, and it boots. Turn it off, nothing. Long story short, if I unplug the motherboard power cord from the board, and plug it back in, it boots, but if I turn it off, I have to repeat the motherboard plug thing to get it to boot again. I have had the drive checked for viruses, and it's clean.
I have to admit, I am stumped! Any ideas? Any suggestions would be greatly appreciat... Read more

A:Computer won't boot without unplugging and plugging motherboard power

Read other 6 answers
RELEVANCY SCORE 70

When I plug in my laptop to charge the laptop turns off, and when I unplug the charging cord from the computer it turns off. Does anyone know whats going on? I have an Inspiron 15 5558.

A:Laptop turning off when plugging or unplugging in charging cord

Hi DNGUYEN2252,
Are you using an original Dell OEM Adapter? When you plug in the adapter to the system, does the adapter stay firm or does it fall off easily? Is the adapter frayed? Is there any damage on the system?
Does the adapter led stay on and stable or does it go off when connected to the system?
Disconnect the adapter and battery and press and hold the power button for 30 seconds to release any static power. Then try connecting with the adapter only / battery only.
I would first suggest you to try with another power adapter. The current one in use might be shorting the system and hence the system powers off.
If another adapter works fine, then replace the adapter. If the other adapter  also exhibits the same behavior, then replace the DC port - this is the part you would need - http://bit.ly/2kZR8go
If nothing works, I would suspect a faulty motherboard. 
If there is no warranty, then you could contact our team to get a quote for a paid service call - http://dell.to/1vnT6CQ
Also, please click my DELL-username and write me a private conversation with the service tag and your contact details(Name and Email) for case records.
Let us know if you have any other queries.

Read other 1 answers
RELEVANCY SCORE 70

I was wondering if anyone is familiar with a method to enable sounds for when you plug in or remove a charger connected to your laptop. It is not a problem with my pc, but is an option that is not available for me which i would like to install to let me know if i accidentally unplugged the charger, particularly if I'm working on a full-screen feature. Any help would be appreciated.
I have Windows 7 home Premium 32-bit installed.

A:How to enable sound when plugging/unplugging charger for laptop.

In the System Sounds, there is an option for device connect or disconnect. This will probably do what you want. You will have to assign a sound for those functions.

The System Sounds panel can be accessed from Start/Control Panel/Hardware and Sounds. Click on "Change System Sounds".

Read other 2 answers
RELEVANCY SCORE 70

I have a Dell Vostro 1400 running Vista Home Basic and have had two periods in the laptop's existence where it would mysteriously freeze. You could see everything on the screen, and the power lights were on, but it would not respond except to a hard reboot by holding the power butting down for 5 seconds.

I am going through one of those periods now, and have discovered that the problem happens when I am either plugging or unplugging the AC power adapter, but don't know why. I have been all over the web for a solution, and while it does seem I am not alone with this problem, I have not read a sensible solution yet. My favorite bad answer is "don't unplug your laptop when it's on."

So, does anyone know what it could be? I wanted to look at system logs, and so went into the Event Viewer not even sure what to look for, but didn't see anything that looked like a likely culprit. Please help!

Thanks,
Neil
 

A:laptop freezes when plugging and unplugging AC power adapter

being a member of the Dell Community Forum, I looked there and found this

A lot things happen in Windows when inserting the AC power adapter.

To check if it's a classic CPU lock-up: repeatedly press capslock. If the capslock light doesn't change, there's no live in there.

Assuming the CPU is locked up: It's possible there's a log entry in the system log just before the AC power adapter is inserted. These entries give clues where to look, just before things went sour.

Next try to reproduce it in Safe Mode (press F8 when Windows start) If it's also in Safe Mode - try running an alternative OS (no need to install)

If the problem also shows up here - most likely it's a hardware issue.

Otherwise it's a windows issue - might be driver related.

the "alternate OS thing is a link on the forum web site. Click here to go to that site.

Hope this is some help... Raybro
 

Read other 1 answers
RELEVANCY SCORE 69.2

Urgh. Typical.

Install new case fans after moving 2 HD cages from the front of Corsar 600T case.
Check they run ok. Fine.
Put HD cages back in, one in the space on the bottom of the case beside the PSU.
Fight with the cables to get the HDs connected and the modular PSU cables back into the PSU.

- Attempt to power on. Nothing.
- Check cable, try another power cable. Nothing.
- No fans, no lights, nothing.
- No 'electrical sound' when flipping the switch on the back of the PSU.

Seems I have a 7 year warrant on the PSU and its only about 3 years old. But Corsair RMA system insists that you "try another PSU to verify the problem is the PSU" which is fair enough so off to buy another PSU, probably another Corsair. Hope the RMA system allows for refund rather than replacement, otherwise I'll have 2 PSUs which isn't really much use. I guess I can use this as an opportunity to upgrade to a bigger PSU since 7970 CF, 3 HD, 2 SSD, i7 2600K @ 4.7Ghz, a powered device connected to almost every single USB port is probably getting towards it's limits. I can then stick any replacement HX750 on Ebay or something...
 

A:Corsair HX750, dead after reseating and unplugging, re-plugging cables

Arris said:





Seems I have a 7 year warrant on the PSU and its only about 3 years old. But Corsair RMA system insists that you "try another PSU to verify the problem is the PSU" which is fair enough so off to buy another PSU, probably another Corsair.Click to expand...

I didn't have any fuss with my Corsair RMA request, when I mentioned using a Power Supply Tester.
 

Read other 3 answers
RELEVANCY SCORE 68.4

Hi Experts, I have a serious problem using my W520 since a few month. When plugging in or unpluggingthe power cable the system directly jumps into Blue Screen (BSOD). I used a small tool to extract the basic dump message: RESOURCE_NOW_OWNED I installed the newest versions of LENOVO Solution Center, LENOVO Energy Management, ...I did an BIOS update longer ago, but I'm not sure, if there was a time-based relation to my problems. The BSOD occurs when: * Laptop started with power cable => Power unplugged* Laptop started without power cable => Power plugged* Laptop in sleep mode => Power plugged and Laptop started again lifting screen* Bring Laptop in sleep mode => Power plugged Does anybode had this problem. Before every meeting now I have to shutdown and restartthe engine... I'm not sure, if the Windows repair CD could detect and repair such a problem.Thanks in advanceKlaus Wegener

Read other answers
RELEVANCY SCORE 68

Just noticed this whenever I plug or unplug the charger. The laptop lags for 1-2 seconds before returning to normal. This is noticeable when playing games or watching videos. Haven't seen any abnormal drops or spikes with the temperature of the CPU, GPU and HDD which would suggest a hardware issue. Tried doing this while running 3DBenchmark, and there is a huge drop in FPS, from 130-200fps down to almost 16fps esp. when unplugging the charger.Is this normal?

Read other answers
RELEVANCY SCORE 60

I need to use two monitors on my Dell desktop computer with Windows 7. But I have difficulty to plug one of the monitors to the correct video port!

I have a VGA port on one board which I can connect either of two monitors to this port separately. On the second board I have three ports, a VGA, DVI and a HDMI port. It seems that this port is not recognized by my system. How can I make sure if it is detected?
 

A:Problem with Plugging two monitors to my system

Read other 7 answers
RELEVANCY SCORE 58.8

I have a Dell Optiplex 745 (the smallest one) with Intel Pentium D. It is running on 3.40GHz and 2GB of RAM. I was struggling to plug in ATI Xpert 2000 my cousin gave me but it didn't fit so I decided to make it smaller by removing the metal so I could plug it in.

One it was plugged in I turned my computer on but the graphic card wasn't detected. It seemed the computer didn't even noticed it was plugged in. I certainly have Intel Q965/Q963 Express Chipset Family installed.

Please tell me if I am missing any other information! I really want this graphic card to work
 

A:No signal from monitor after plugging in graphic card.

Hmm, make sure you have the card seated correctly, and once you get a signal from the monitor download the latest drivers from ati site....
 

Read other 2 answers
RELEVANCY SCORE 58.8

So tonight I shut down my computer and unplugged the VGA cable from my graphics card and tried to plug it into the VGA input on my motherboard. The reason for this was because I tried switched from dedicated graphics to integrated graphics (Long story). When it was plugged into the motherboard I tried switching my computer on and my monitor came up with 'no signal' and the light stayed orange. So I tried to plug The VGA cable back into my graphics card then I still got no signal!

II've tried everything from re-seating the graphics card and RAM to trying different monitors and cables. It simply isn't working and all I did was unplug the VGA cable from my graphics card into my motherboard VGA input. I can't post any detailed system info as I am writing this on my iPod (very time consuming!) as I can't even do anything on my computer. But my monitor was displaying everything perfectly fine before I unplugged my VGA cable (when my computer was shut down) I don't see what's causing this.

Any help will be greatly appreciated.
 

A:No signal from monitor after plugging VGA cable into Motherboard

Read other 16 answers
RELEVANCY SCORE 57.6

I have a two story house, and I need the internet to reach all the way to the second story without having to move th modem and router. Also I don't want all those wires running up my stairs. Is there anyway to repeat my wireless signal without having to hardware into the original router? Basically have a device that would resend the signal upstairs if that makes any sense.
 

A:Solved: How to repeat wireless signal without plugging into the main router?

You could try a wireless access point have a look starting here http://www.newegg.com/Store/SubCategory.aspx?SubCategory=335&name=Wireless-AP-Bridges&Page=1 You may get more knowledgable advice if you asked a moderator to move this to the Networking Forum though.
 

Read other 3 answers
RELEVANCY SCORE 57.6

I have a two story house, and I need the internet to reach all the way to the second story without having to move th modem and router. Also I don't want all those wires running up my stairs. Is there anyway to repeat my wireless signal without having to hardware into the original router? Basically have a device that would resend the signal upstairs if that makes any sense.
 

A:Solved: How to repeat wireless signal without plugging into the main router?

Read other 7 answers
RELEVANCY SCORE 56.4

TV will not receive signal from my PC when connect by a HDMI cable.
I have done the following:
1. Checked and replaced HDMI cables.
2. Update all driver's possible.
3. Installed the latest ATI Catalyst Control Centre.

I get a BSOD when switch modes on my TV to PC on my telly. It recognises the HDMI cable... but no desktop?
I have tried to Reduce screen resolution on my PC.
ATI Catalyst has reconised both monitor and TV but still BSOD.

System Summary >>>
> Mainboard : ASRock P55 Pro
> Chipset : Intel P55
> Processor : Intel Core i5 750 @ 2666 MHz
> Physical Memory : 4096 MB (2 x 2048 DDR3-SDRAM )
> Video Card : ATI Radeon HD 5750 Series
> Hard Disk : SAMSUNG (1000 GB)
> DVD-Rom Drive : TSSTcorp CDDVDW SH-S223C ATA Device
> Monitor Type : Samsung SMB2430H - 24 inches
> Network Card : RTL8168/8111 PCIe Gigabit Ethernet Adapter
> Operating System : Windows 7 Ultimate Professional 6.01.7601 Service Pack 1 (x64)
> DirectX : Version 11.00
Ram : Corsair 4GB (2x2GB) DDR3 1600MHz/PC3-12800 XMS3 i5 Memory Kit CL9(9-9-9-24) 1.65V

A:TV will not receive signal from my PC

Windows7_Vista_jcgriff2.zip

Read other 4 answers
RELEVANCY SCORE 55.6

Hello,

I have two computers, both running XP. On one computer, I have a cable modem hooked up to a wireless router, and I was wondering if I could use another router I have to connect the other computer to the internet. Is this possible? The two routers I have are a Netgear WGR614 v.6, and an older Linksys BEFW11s4.

Thanks for any input.
 

A:Can one router receive a signal from another?

Read other 10 answers
RELEVANCY SCORE 55.6

Somebody help.

Everytime I pull out my USB (wireless) internet device, I get the blue screen which performs a screen dump and then reboots. Why is this?

A:Unplugging USB Internet Device causes memory dump and reboot!

Hi Cookie7898 and welcome to the forums

This could be because you are not removing the device safely. Check the icons on the bottom right of the taskbar. You are looking for the icon that looks like the one highlighted in red. If this symbol is not showing, click on the left-pointing arrow on the left (shown here as right-pointing because all the symbols are showing) to expand this group to show all symbols.

Left click on this and from the pop-up select the device by left clicking on it. Wait until the following message is displayed.

Click 'OK' and then remove the device.

Read other answers
RELEVANCY SCORE 54.8

After trying to install some new RAM and a soundcard, my computer doesn't ouput a video signal anymore. My video card worked fine before this and the fan on it is still spinning. All monitors just display a "no signal detected" message. I don't get any beeps and it don't hear the hard-drive booting into Windows. I tried to remove almost every part of my computer, but I don't even get any beeps. I already tried to reset the CMOS. Is my mobo dead?
 

A:I don't receive a signal to my monitor after some maintenance

This sounds like a Power supply problem.You might try a new one as
they don't cost much.Get at least 350.Thats happened to me.
Or your Power on switch might not be connected.
Or you left your Power supply in the off position during new installations
and havn't turned it back on.
 

Read other 6 answers
RELEVANCY SCORE 54.8

I have a Dell Laptop D830 with wireless card (Dell Wireless 1505 Draft 802.11n WLAN Mini-Card) (as listed in Device Manager). I travel for work and stay in multi hotels with wireless. I cannot get connected via wireless (all they offer) at a hotel where I must be for several months. I work all day using wireless at the work location but when I get to the hotel, it can't find the wireless. A co-worker, same laptop, same hotel has no issues. I've uninstalled and reinstalled the wireless card, searched for new driver and got response that my driver is correct. Hotel wireless is unsecured and requires no password. We compared our setups (my co-worker and me) and can find nothing different. Any ideas to try?
 

A:Unable to receive wireless signal

Read other 9 answers
RELEVANCY SCORE 54.8

I have an Aspire V5-572P-6646 laptop and run Windows 10.  I cannot pick up a wifi signal unless I'm within 10 to 15 feet of my wireless router.  My HP laptop has no problem picking up the router on different floors.  Is there a fix to the wifi problem with the Aspire laptop?

Read other answers
RELEVANCY SCORE 54.8

I have a Linksys WRT54G wireless router which is my main router on my main floor. If I have another router (Linksys WRT54G that a friend gave to me) can I put it by my other desktop computer in the basement and use it to receive a signal from the main router to get internet on the computer in the basement.
 

A:Wireless router to receive signal

See if this helps out.

http://www.wi-fitechnology.com/viewthread131.html

I have only done this one other time and it was with dlink routers. This helped me out alittle.
 

Read other 2 answers
RELEVANCY SCORE 54.8

The university I work at has an off-campus wireless network. But the signal to my house is very weak. What can I do to amplify this signal? Is there some kind of USB antenna available?

I use a laptop with a built-in g/b card to access wireless internet. This specific network that I'm talking about is a g network.
 

A:How to amplify wireless signal that I receive?

Read other 7 answers
RELEVANCY SCORE 54.8

I'm working on an old server computer. The Dell PowerEdge 600SC. It is running Linux RedHat, can't remember what version. I don't know much about Linux. I'm wanting to clean install Windows 7 on to it, and use it as another computer for our office. I upgraded the RAM, CPU, and added another HDD. Now when I connect the monitor it will not receive a signal. The monitor works when connected to another computer.

Here is the RAM I installed:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820159107

Here is the CPU I installed:
http://www.geeks.com/details.asp?invtid=P43200E478

Here is the HDD I added:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136112

I used thermal paste when installing the CPU. I also wore an anti-static wristband while working on it. I have tried putting the old ram back in, but it still won't receive a signal. The old CPU I can't use because while separating it from the heatsink some of the pins got bent. I originally installed the new HDD as the master and used the old one as a slave, and I tried flipping them also but still nothing. Anybody got any ideas? Thanks.
 

A:Upgraded RAM, CPU, and HDD; Monitor Won't Receive Signal

It sounds as if your system is not even going through POST. The HDD wouldn't cause that. Since you already tried putting your old RAM back into the machine and have the same problem, I would think you are having an issue with the new CPU. Did you verify with Dell compatibility of that CPU with the system?
 

Read other 3 answers
RELEVANCY SCORE 54.8

I recently moved my hp pc to my house next door. I hooked everything up, and the monitor turns on and says "no input signal". I tried unplugging and replugging from the wall and computer. Then I tried another monitor, same problem. Any ideas? It worked fine before I turned it off next door, I bring it here, and it doesn't give a signal. Any clues?

A:Monitor doesn't receive signal

did you check the inside make sure nothin came loose? might want to reseat everything.

Read other 19 answers
RELEVANCY SCORE 54.8

First of all I am a 76 year old tech idiot, so please bear with me. My TV signal is received via my modem via my android duel core box, on which I watch TV via Filmon.com. My problem is, I have a smart TV in the bedroom, is there anyway I can use some sort of transmitter/receiver to watch Filmon.com on the second TV?
 

A:Solved: How Do I Receive Android Signal on 2nd TV

Read other 6 answers
RELEVANCY SCORE 54.8

I have a problem with the Sierra EM7455 Broadband Card (installed from factory on my T570 at November 2017). I can connect to WAN only if the signal is very strong. I had confirmation comparing my smartphone and T570: in the same place and the same time , I can connect to WAN by tethering on smartphone, but it doesn't connect by SIM on Sierra EM7455 on the T570. The SIM Card provider is the same (3). There is a way to set a better signal receive? Or other way to improuve it? RegardsFabrizio

Read other answers
RELEVANCY SCORE 54.4

the email wont sinc and states it is out of date

A:I am no longer able to receive emails on my laptop

Hi, I need more information: 1. Which email agent/clientOutlook, webmail or others ?2. and which service do you use ? Gmail, Hotmail, Yahoo or something else ? This is something to do with your setup and provider, not from machine. Regards.

Read other 1 answers
RELEVANCY SCORE 54.4

I have been using my Sony Bravia 4KUltra HD as my monitor for a couple of years now. I recently moved the TV and desktop to another room and now nothing. I connected it exactly as before. But the TV says it is not receiving a signal. I've checked to see if there was a problem with wireless mouse or keyboard. These appear to be working properly. The cable is a VGA to HDMI connection. And since this is the only monitor available to me presently, I can't even troubleshoot very well. Any ideas?

Read other answers
RELEVANCY SCORE 54.4

Hi,

I received three things for Christmas: 1. Linksys WiFi E1200, 2. Pandigital Planet tablet, 3. Roku

My family room is on the same level as my Wifi router but about 70 feet apart, but I cannot get a wifi signal in the family room on the Pandigital tablet, however, the Roku seems to be receiving the wifi signal because the Roku works.

Is my tablet not working correctly?
Can and should my son increase the signal strength of the Linksys?

Thanks.

 

A:Cannot receive WiFi signal in family room

Read other 7 answers
RELEVANCY SCORE 54.4

what is best network card to recive a wifi signal from far away? Network Card or any type of hardware
 

A:What is best network card to receive a wifi signal from far away?

I assume you mean desktop.
What do you mean by "...a wifi signal far away..." Indoors, outdoors, upstairs, next door
Do you have control of the "far away" source?
We recommend Linksys 802.11N WMP300N for PCI card, or the DLink DWA-542 Range Booster Wireless N.
But there is some advantage to using a USB Wireless N Linksys USB WUSB300N because you can move it around to get the best results for the local environment...
 

Read other 5 answers
RELEVANCY SCORE 54.4

Hi i just built a new Windows 7 Machine and i installed x64 bit for the first time and this is my main computer with a WRT54GL Router hooked up and i moved my old machine out to my living room, but when i try to connect to it wirelessley the x86 wont even see my network at all, i have SSID broadcast on, the only way it will see it is if i disable security and WPA2 then it shows up but as soon as i put the security back on it wont connect/see it at all. Can anyone help me i have no idea whats going on, my previous machine i had out in my living room was windows xp and it could connect to my x86 win 7 fine, but now i cannot get it to work, i even bought a new wireless usb adapter to try and it still wont see it unless i unencrypt it.

Thanks.

A:Windows 7 x84 cannot receive wireless signal from x64 unless unsecured

You might try a firmware update on the WRT54GL, I notice lots of problems connecting to those older routers, especially if using a Broadcom interface.

Also make sure the latest drivers are installed from the manufacture of your wireless NIC.

Go with WPA2 security and AES encryption. They tend to work best with Windows 7 drivers.

Read other 3 answers