Over 1 million tech questions and answers.

BSOD Drive Power State

Q: BSOD Drive Power State

Usually BSODs after second standby (when lid closed). First works fine...

Started after installing Win 7 from free Gateway update disk. Laptop purchased last August

Gateway NV52 running 7 at 64 bits

Thanks!

RELEVANCY SCORE 200
Preferred Solution: BSOD Drive Power State

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Drive Power State

7 memory dump files, all are STOP 0x9F and all are blaming VMNetSrv.sys - a component of the Microsoft Virtual Machine Network Services driver. (interestingly MSINFO32 blames tcpip.sys - a component of the Windows networking sub-system).

There are 89 STOP 0x9F's in the MSINFO32 report, along with 3 STOP 0x7F
More info on the STOP 0x9F here: http://www.carrona.org/bsodindx.html#0x0000009F
More info on the STOP 0x7F here: http://www.carrona.org/bsodindx.html#0x0000007F

Your Virtual Box adapter is disabled, is this deliberate? (from the MSINFO32 report)

Quote:




VirtualBox Host-Only Ethernet Adapter ROOT\NET\0000 This device is disabled.




Which virtual machine clients do you have installed on your system? I can't find any in the Program Groups section of MSINFO32.

Anyhow, please remove the current virtual machine software. Then install a freshly downloaded copy. If you still get BSOD's in the virtual machines, delete the virtual machines and reinstall them on the virtual machine clients.


Also, please remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:

Quote:




How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.




- - The most common drivers are listed on this page: http://www.carrona.org/dvrref.html
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers. Please pay particular attention to any dated 2007 or earlier and the VMNetSrv.sys driver:

Code:
ahcix64s.sys Mon Sep 22 07:24:17 2008 - AMD AHCI Compatible RAID Controller Driver - http://www.carrona.org/dvrref.html#a
mdmxsdk.sys Mon Jun 19 17:27:26 2006 - Conexant modem audio driver - http://www.carrona.org/dvrref.html#m
NTIDrvr.sys Wed Jan 30 20:29:47 2008 - NTI CD-ROM Filter Driver by NewTech Infosystems - http://www.carrona.org/dvrref.html#n
UBHelper.sys Wed Jan 30 20:30:03 2008 - NTI CD & DVD-Maker or NTI Backup NOW! or NTI CD-Maker by NewTech Infosystems - http://www.carrona.org/dvrref.html#u
VMNetSrv.sys Wed Jan 16 06:52:01 2008 - Microsoft Virtual Machine Network Services Driver - http://www.carrona.org/dvrref.html#v
Summary of the BSOD's:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Feb 5 10:37:35.559 2010 (GMT-5)
System Uptime: 0 days 4:06:25.274
BugCheck 9F, {3, fffffa8003b98e30, fffff800044c9518, fffffa800a813b80}
*** WARNING: Unable to verify timestamp for VMNetSrv.sys
*** ERROR: Module load completed but symbols could not be loaded for VMNetSrv.sys
Probably caused by : VMNetSrv.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Feb 7 16:55:10.113 2010 (GMT-5)
System Uptime: 0 days 2:54:24.828
BugCheck 9F, {3, fffffa8003b7fe30, fffff80000b9c518, fffffa8004950820}
*** WARNING: Unable to verify timestamp for VMNetSrv.sys
*** ERROR: Module load completed but symbols could not be loaded for VMNetSrv.sys
Probably caused by : VMNetSrv.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Wed Feb 10 12:09:00.267 2010 (GMT-5)
System Uptime: 0 days 5:46:25.982
BugCheck 9F, {3, fffffa8003b80e30, fffff80000b9c518, fffffa80092cb4b0}
*** WARNING: Unable to verify timestamp for VMNetSrv.sys
*** ERROR: Module load completed but symbols could not be loaded for VMNetSrv.sys
Probably caused by : VMNetSrv.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Feb 12 08:27:21.392 2010 (GMT-5)
System Uptime: 0 days 1:28:56.107
BugCheck 9F, {3, fffffa8003b7fe30, fffff80000b9c518, fffffa80040686e0}
*** WARNING: Unable to verify timestamp for VMNetSrv.sys
*** ERROR: Module load completed but symbols could not be loaded for VMNetSrv.sys
Probably caused by : VMNetSrv.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Feb 19 00:32:11.451 2010 (GMT-5)
System Uptime: 0 days 4:04:25.166
BugCheck 9F, {3, fffffa8003b7fe30, fffff80000b9c518, fffffa80099ad6c0}
*** WARNING: Unable to verify timestamp for VMNetSrv.sys
*** ERROR: Module load completed but symbols could not be loaded for VMNetSrv.sys
Probably caused by : VMNetSrv.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Feb 19 23:18:34.050 2010 (GMT-5)
System Uptime: 0 days 16:38:54.765
BugCheck 9F, {3, fffffa8003b99e30, fffff800044c0518, fffffa80088a0530}
*** WARNING: Unable to verify timestamp for VMNetSrv.sys
*** ERROR: Module load completed but symbols could not be loaded for VMNetSrv.sys
Probably caused by : VMNetSrv.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Feb 25 15:24:51.397 2010 (GMT-5)
System Uptime: 0 days 7:37:55.112
BugCheck 9F, {3, fffffa8003b80e30, fffff80000b9c518, fffffa8008c777f0}
*** WARNING: Unable to verify timestamp for VMNetSrv.sys
*** ERROR: Module load completed but symbols could not be loaded for VMNetSrv.sys
Probably caused by : VMNetSrv.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System

Read other 2 answers
RELEVANCY SCORE 74

My Mother was trying to plug in her iphone into her laptop a few days ago. Her laptop is HP DV7-12?? (sorry I don't know the full numbers since I'm not at my parents house anymore).

She has a Logitech tackball mouse plugged in so I unplugged it. Well even trying the other two usb hubs doesn't work. After that, I plugged in the logitech mouse back into the same usb.. It didn't work..

After that I tried powering down the laptop. but after 13m (ruffly), it bsod with a drive power state failure. with a 9f problem..

I've googled and they've told me about looking at the minidump and from that it would show what was wrong.. I don't know how to read it, and nor do I have the debugging tool.

So, I was wondering if someone could read it and help me with the problem.

system specs for her laptop is
win vista 64bit prem.
6gb ram,
intel cpu 2.2ghz
Nvidia 9600m GT

I've ran in safe mode and everything works like a charm, but in windows.. I have to make sure it's plugged in before I boot into vista for it to work.


Thank You

A:bsod drive power state failure

Both are 100009F, pointing to different items:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000009F, {4, 258, fffffa80054db040, 0}

Unable to load image \SystemRoot\system32\DRIVERS\hpdskflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for hpdskflt.sys
*** ERROR: Module load completed but symbols could not be loaded for hpdskflt.sys
Probably caused by : hpdskflt.sys ( hpdskflt+29e1 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with th... Read more

Read other 4 answers
RELEVANCY SCORE 74

This has been the first crash I've gotten in ages. Basically I was just playing New Vegas on my computer, and the game randomly locked up during normal gameplay and gave me that error. I uploaded the crash dump file
http://www.mediafire.com/?sidtlnt7tixrf00
but not sure what was the cause of the issue.
Also, I tried using readyboost today for the first time in a while, that may have been the issue because I'm unsure about my memory card reader driver for 7.

A:Drive Power State Failure BSOD

Please visit the PC Manufacturer's website and download/install the most recent version of the Media Card Reader drivers for Win7 and your system. The BSOD points to o2sdx64.sys - a component of your Memory Card Reader driver by O2Micro.

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Oct 20 10:39:29.502 2010 (UTC - 4:00)
System Uptime: 5 days 10:25:50.264
*** WARNING: Unable to verify timestamp for o2sdx64.sys
*** ERROR: Module load completed but symbols could not be loaded for o2sdx64.sys
Probably caused by : o2sdx64.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: audiodg.exe
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`05926050 fffff800`04526748 fffffa80`07030e10
??????????????????????????????????????????????????????????????????????????????????????``

Read other 1 answers
RELEVANCY SCORE 74

I forgot to copy the information i had in the window that pop'd up.
I have a dell n5110 and am running windows 7 64bit with intel core i5.

I believe that this has something to do with my wireless drivers(or is affecting it somehow.)
Any help would be appreciated.
Thanks.

A:BSOD,Drive power state failure.

Of it helps,0x0000009F is the code that i believe popped up.

Read other 4 answers
RELEVANCY SCORE 74

I recently installed some Windows updates on my new computer, and after the first boot with the updates my computer froze and I got a BSOD saying "Drive Power State Failure"

Here is the attached .dmp file

Thank you

A:Drive Power State Failure - BSOD

Hello Dominicoben

► You are getting a STOP 0x0000009F: DRIVER_POWER_STATE_FAILURE .

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8005fb8060, fffff80000b9c4d8, fffffa800397b760}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : usbhub.sys
I would suggest you to turn on USB selective suspense, to see if it is caused by the driver or the hardware itself.
USB Selective Suspend - Turn On or Off

► If there any devices attached in the USB ports (other than keyboard and mouse), remove those and see if the situation changes.

► And, while getting windows updates, get all the updates. Your Default Hub Driver for USB is very old, compared to the other few drivers. So the chance of incompatibility is there.

Code:
lmvm usbhub
start end module name
fffff880`06e92000 fffff880`06eec000 usbhub (pdb symbols) c:\symcache\usbhub.pdb\295DCA65F67B44BF8DD26C3B6D89A6F71\usbhub.pdb
... Read more

Read other 1 answers
RELEVANCY SCORE 74

Hello,
There have been many problems since installing W8 from the Shutdown and Restart button being unresponsive to USB 3.0 failures to nvidia driver issues.

Anyhow, I've had numerous BSOD since upgrading from W7 Pro, so I did a clean install of Win 8 Pro afterwards. But now I've encountered another recent issue, a drive power state failure. The problem occurred when I was removing my USB 3.0 PCI card and dusting off any dirt because I've come to believe the card is dead (device manager shows a yellow ! beside Renesas usb 3.0 xHCI). I booted the computer and when I snapped the side plate back on to the case I get the error.

Any help would be appreciated.

A:BSOD, drive power state failure

Welcome
It takes several BSODs to ascertain the definitive cause of your problem. You have given us one report and it mentions a driver. It is a Microsoft Driver and not the true cause. After a few more BSODs report again.

Read other 1 answers
RELEVANCY SCORE 74

This morning didn't start well for me. It had the following events.

1) Volume wouldn't work.
2) Volume Mixer freezes/not responding when trying to move the volume slider
3) Device Manager Froze when messing with the audio section
4) Windows said there were updates and it needed to be restarted, when updates supposedly finished the computer "Restarted" and it say on the restarting screen for about 5 minutes then it BSoD's

The following is the files that you guys require. Also I have no AV just Defender and Windows Firewall. In the past in Windows 7 "AMD High Definition Audio" froze my volume control so I had to disable that, in this case it did NOT help.

NOTE: I do not have an SSD nor do I put it into sleep. I am also dual booting windows 7 and 8. Although in the past it BSoD'd when it was only windows 8.

Also last night I installed "BlackX" software, it's a hotswap dock with a USB cable that you can just plop a HDD in and press the power button and view the files on the drive.

I also looked up the BIOS for my motherboard, and this was on the download page:

It says windows 8 ready, but I don't know if it was already Windows 8 ready or that's the NEW drivers. I don't know how to check the date of my BIOS nor does it specify a date for the supposed new BIOS on their site.

I am also on Windows 8.1, I have connections. I also have no sound, not sure why.

A:Drive Power State Failure BSOD

I hate to bump this but I wish to at the very least have a general statement / reply.

Read other 3 answers
RELEVANCY SCORE 74

Hey Guys,

First off, Happy 2011! I've been experiencing the BSOD every now and then and I've finally had enough of it. So I'm hoping you guys can help me.

Thanks in advance!

OS - Windows 7
x64
Windows Vista originally installed
Full Retail Version
2 Years old
Around 4 months old
CPU - Intel Core 2 Duo CPU T9400 @ 2.53GHz
Video Card - NVIDIA GeForce 9800M GS
MOtherboard - Not sure, but I have an ASUS laptop
Power Supply - Not sure either.

A:BSOD - Drive Power State Failure

Hello,

There are no dumps recorded in that report; I don't see any in your Minidump folder either.

I see evidence of BSODs on November 16, September 26, and September 20:
Code:
Event[4674]:
Log Name: Application
Source: Windows Error Reporting
Date: 2010-11-16T17:29:27.000
Event ID: 1001
Task: N/A
Level: Information
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: Louis-PC
Description:
Fault bucket , type 0
Event Name: BlueScreen
Response: Not available
Cab Id: 0

Problem signature:
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:

Attached files:
C:\Windows\Minidump\111610-37674-01.dmp
C:\Users\Louis\AppData\Local\Temp\WER-17853316-0.sysdata.xml

These files may be available here:
C:\Users\Louis\AppData\Local\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_06e1a826

Analysis symbol:
Rechecking for solution: 0
Report Id: 111610-37674-01
Report Status: 0
Event[10533]:
Log Name: Application
Source: Windows Error Reporting
Date: 2010-09-26T11:01:27.000
Event ID: 1001
Task: N/A
Level: Information
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: Louis-PC
Description:
Fault bucket X64_0x9F_3_IMAGE_snp2uvc.sys, type 0
Event Name: BlueScreen
Response: Not available
Cab Id: 0

Problem signature:
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:

Attached files:
C:\Windows\Minidump\092610-70574-01.dmp
C:\Users\Louis\AppData\Local\Temp\WER-102991-0.sysdata.xml
C:\Users\Louis\AppData\Local\Te... Read more

Read other 1 answers
RELEVANCY SCORE 74

My laptop is fairly new and should not be giving me the issues that it does. It suddenly started blue screening for no reason. I don't have to be doing anything, it will just crash for no reason. I have done a full system wipe and it still crashes. I need help.

A:BSOD for power drive state failure

Hello Lawndart.

This particular version of display driver (the latest one) is problematic.

Code:
Irp is active with 4 stacks 2 is current (= 0xfffffa800720d498)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8009879850 00000000 fffff8800621c084-fffffa800b5e47c0 Success Error Cancel pending
*** WARNING: Unable to verify timestamp for ACPI.sys
*** ERROR: Module load completed but symbols could not be loaded for ACPI.sys
\Driver\ACPI nvlddmkm
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 fffffa800a954040 00000000 00000000-00000000 pending
\Driver\nvlddmkm
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800be3e3c0

Args: 00000000 00000000 00000000 00000000
--------------------------------------------------------------------------------------------------------
start end module name
fffff880`060f1000 fffff880`06b8f000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sat Dec 29 12:17:52 2012 (50DE9218)
CheckSum: 00A7F96C
ImageSize: 00A9E000
Translations: ... Read more

Read other 9 answers
RELEVANCY SCORE 73.2

Hi All,

I'm having a lot of trouble figuring out my BSOD drive_power_state_failure. I appreciate any advice to resolve the matter. I've also attached the required zip drive.

I do not use the power button on my desktop to shut down. This is a home built computer that I've had for about 3 years, no big issues since then except for a bad graphics card.

This is the error message I get after restarting from the BSOD:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80067D6A30
BCP3: FFFFF800043BF3D8
BCP4: FFFFFA8006C76010
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\011117-6973-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-9157-0.sysdata.xml

Read other answers
RELEVANCY SCORE 72.4

Hi everyone,

I am using a Toshiba Satellite A505-S6025 laptop running Windows 7 Pro 64-bit, 4GB RAM, Nvidia 310M graphics card.

Things have been working well for a couple of months until yesterday, after I installed a Western Digital Mybook World Edition (1TB) and the most recent Windows updates. After these installations, I have been having 2 problems:

1.) First thing I noticed is that shutdown takes forever, and ends with a BSOD with DRIVER_POWER_STATE_FAILURE message.

2.) Secondly, none of my USB devices are being recognized anymore. Sometimes when I have these devices plugged BEFORE powering Windows on they get recognized properly, but if I plug any USB devices after Windows loads I do not get any recognition at all.

I've tried updating to the latest video drivers, BIOS, and uninstalling the programs that came with the WD drive (MioNet and WD Anywhere Backup) but the problems haven't gone away.

Analyzing the memory dump led to this message:

On Thu 5/13/2010 2:28:10 PM your computer crashed
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0x1000009F (0x4, 0x258, 0xFFFFFA8003B85040, 0xFFFFF80000B9C510)
Error: Unknown
Dump file: C:\windows\Minidump\051310-17097-01.dmp
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incor... Read more

A:USB device not detected, BSOD Drive Power State Failure

Welcome!

First, some basic troubleshooting tips. Disconnect the new hard drive and do a system restore to get to a point before the troubles.

Uninstall the Toshiba HDD Protection Program.

BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu May 13 10:26:56.095 2010 (GMT-4)
System Uptime: 0 days 0:34:58.733
BugCheck 1000009F, {4, 258, fffffa8003b85040, fffff80000b9c510}
Probably caused by : ntkrnlmp.exe ( nt!KiSwapContext+7a )
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu May 13 05:53:57.120 2010 (GMT-4)
System Uptime: 0 days 0:56:05.743
BugCheck 1000009F, {4, 258, fffffa8003b85b60, fffff80000b9c510}
Probably caused by : ntkrnlmp.exe ( nt!KiSwapContext+7a )
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu May 13 04:57:24.180 2010 (GMT-4)
System Uptime: 0 days 4:23:15.413
BugCheck 1000009F, {4, 258, fffffa8003b85040, fffff80000b9c510}
Probably caused by : ntkrnlmp.exe ( nt!KiSwapContext+7a )
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed May 12 23:21:56.142 20... Read more

Read other 7 answers
RELEVANCY SCORE 72.4

Lately my 1.5 year old ASUS CM6870 Desktop running Win8.1 started to give me the BSOD with the following two error messages: Page Fault in Non_Page Area; and Drive Power State Failure. Occasionally I will get the sudden BSOD and this B stands for Black with no cursor or message showing. In about 10 seconds the monitor will display a message saying it is going into inactive mode. I pressed the desktop power button, the system just shut down. Two days ago at log off Windows was doing update and at 30%, everything was frozen. Left it on the whole night, same screen the next morning. Need to depress the power button to shut down the system although Windows said I can't shut down the PC while it's doing an update. That's about the symptoms I can recap for now. Zip file attached as instructed. Thanks.

A:BSOD re Page Fault and Drive Power State Failure

There is no dump file. Please check your minidump folder for it. When you find it, upload it. If you are using CCleaner, please strop as it deletes minidumps.

Read other 1 answers
RELEVANCY SCORE 71.6

Hi,

I have a 2 week old HP Envy 14, running Windows 7 Home Premium 64bit, 4GB Ram, and an ATI Radeon HD 5650 Graphics card.

Initially for the first few days the notebook worked well, no problems. This week, I encountered the dreaded BSOD. The notebook had trouble shutting down or restarting, taking 10-15 minutes or so. Upon rebooting, I get a BSOD with DRIVER_POWER_STATE_FAILURE message.

I also encountered the USB not recognizing anything that was connected to it after the computer started. If the mouse/ thumbdrive was connected before the computer booted up, it worked. If it was disconnected after booting up, and reconnected the mouse/ thumbdrive would not work. I do not get anything (no error messages or acknowledgement that anything was connected).

I checked the Device Manager, and there are no error messages.

Strange this is, these problems happen sporadically. Sometimes everything works well- USB working as it should, not issues restarting etc. Upon rebooting, the problem starts again.

I've tried updating the latest Win updates, drivers, HP bios etc but still no luck.

Please help. Thank you in advance.

A:BSOD Drive Power State Failure, ntoskrnl.exe, USB ports not working

Hi cabe and Welcome to SF!

First of all, hpdskflt.sys was mentioned in the crash dmp, it belongs to HP Mobile Data Protection System Disk Filter. I would download and install fresh copy of the driver, or might be uninstall it to see if it has anything to do with the crashes you've experienced.

For the mouse and thumbdrive, you might want to have their drivers installed properly, or perhaps you might want to try to have fresh re-install of USB driver by going to Device manager, under USB list you uninstall everything then restart your system. (To go to Device manager, right click on computer and choose manager)

In looking through your driver, I can see some out of date one:

Code:
btwl2cap btwl2cap.sys Fri Apr 03 19:28:45 2009 (49D6A9BD)
Broadcom Bluetooth L2CAP Service. Please download and install fresh update of it


Code:
RimSerial_AMD64 RimSerial_AMD64.sys Mon Nov 24 11:01:01 2008 (492ADDCD)
Virtual Serial Port driver for Blackberry. This need to be updated as soon as possible

BUGCHECK SUMMARY:

Code:
BugCheck 1000009F, {4, 258, fffffa800416d680, fffff80000b9c510}

Unable to load image \SystemRoot\system32\DRIVERS\hpdskflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for hpdskflt.sys
*** ERROR: Module load completed but symbols could not be loaded for hpdskflt.sys
Probably caused by : umbus.sys

Followup: MachineOwner
---------
Regard,

Tuan

Read other 7 answers
RELEVANCY SCORE 60.8

Hi everyone. This is my first post on the forum, so I really appreciate any help that anyone may be able to offer. I have been receiving a drive state power failure error since clean installing Windows 8 on my system. I suspect it may be a bad driver or something, but I am not sure. I already set my system to not hibernate or sleep and I tried updating my BIOS and removing a third-party Spyware protection program, but the error occurred again. I followed the instructions and have attached my memory dump information.

Thanks again for your help!

A:Drive Power State Failure.. not sure why!

The minidumps seem to be pointing at the file: pci.sys which is the NT Plug and Play PCI Enumerator:

Driver Reference Table - pci.sys

This file could be corrupt so make sure you download the latest manufacturers chipset motherboard drivers for Windows 8 64bit:

ASUS - Motherboards- ASUS P8Z68-V PRO/GEN3

Also make sure you have all the Windows 8 updates until you can no longer be updated.

I have also found two drivers that you might consider updating or un-installing/removing if un-needed:

HECIx64.sys - Intel Management Engine Interface: Driver Reference Table - HECIx64.sys
P17.sys - Creative SB Audigy LS: Driver Reference Table - P17.sys

-cheers

Read other 3 answers
RELEVANCY SCORE 60.4

I have been receiving BSOD's when trying to shut down / restart my notebook since yesterday.

POWER STATE FAILURE

It gave me that error in the BSOD. I have tried updating my drivers ( graphic card drivers weren't signed ) but that didn't help.

I have included the minidump in this post.

Thank you.

A:BSOD - Power State Failure

Sorry, did not notice the Blue Screen of Death (BSOD) Posting Instructions.

Here are the files requested.
http://www.mediafire.com/?bs0vlt9krf4209m

(Could not attach file for some reason, disconnected halfway through uploading)

OS: Windows Vista Enterprise (32-bit)

Thank you.

Read other 1 answers
RELEVANCY SCORE 60.4

Hello,

Thank you for taking the time to review the information I am providing; your help is immensely appreciated.

Win7 Pro x64 SP1 full retail version. System built 2009 ? CPU AMD Phenom II X4 955 Black Edition ? Video Card ATI Radeon HD 5770 ? MotherBoard Asus M4A785TD-M EVO ? Power Supply - brand & wattage OCZ 700 Watt

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\011514-20826-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`03611000 PsLoadedModuleList = 0xfffff800`038546d0
Debug session time: Wed Jan 15 02:09:33.172 2014 (UTC - 6:00)
System Uptime: 0 days 20:00:16.328
Loading Kernel Symbols
...............................................................
................................................................
............................................................
Loading User Symbols
Loading unloaded module list
.................
*******************************************************************************
* *
* ... Read more

A:Driver Power State BSOD

Hi,

All of the attached DMP files are of the DRIVER_POWER_STATE_FAILURE (9f) bug check.

This bug check indicates that the driver is in an inconsistent or invalid power state.

Rather than your traditional *9F bug check that contains the blocked IRP address of the driver in the 4th parameter that's causing the bug check, we instead of a LOCK.

We can't really use extensions that go in-depth to locks on Minidumps, so we'll need to use a bit of detective work and likely the use of Driver Verifier to help us out.

-------------------

1.

AODDriver.sys - Wed Sep 02 22:41:48 2009

&

AODDriver2.sys - Wed Nov 21 02:44:04 2012

^^ AMD Overdrive; also in EasyTune6 for Gigabyte motherboard. Very known to cause BSOD's, so please remove ASAP.

2. ASACPI.sys - Wed May 13 21:25:17 2009

^^ Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities - for example I see Asus PC Probe installed. Uninstall ASAP.

3. Remove and replace McAfee with Microsoft Security Essentials for temporary troubleshooting purposes:

McAfee - http://service.mcafee.com/FAQDocument.aspx?id=TS101331

MSE - Microsoft Security Essentials - Microsoft Windows

4. RTCore64.sys - Wed May 25 02:39:12 2005

^^ RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7), especially since yours is dated from 2005. Uninstall ASAP.

5. Uninstall Acronis.

Regards,

Patrick

Read other 1 answers
RELEVANCY SCORE 60.4

Can anyone tell me the problematic driver and how to remove it specifically? Thanks in advance I really appreciate those with debugging software.

-Alan

PS I can't seem to run the SF Diagnostic Tool in Administrative mode. it says "Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item."

A:BSOD power state failure

There's not a whole bunch of information in the dump file (that's why we need the SF Diagnostic Tool files). Without that we'll need, at a minimum, your COMPLETE complete system specs and the report from running MSINFO32.exe.

The error blames hardware - so it can be either a problem with your hardware or with a driver.
The driver involved probably is nvhda64v.sys - a component of your nVidia HDMI audio drivers

You also have other nVidia drivers that are older - so I'd suggest updating your nVidia chipset and video drivers directly from the nVidia website: Drivers - Download NVIDIA Drivers
Here's the older drivers:

Code:
nvmfdx64.sys Sat Nov 17 18:47:57 2007 - NVIDIA nForce Networking Controller Driver - http://www.carrona.org/dvrref.html#nvmfdx64.sys
nvsmu.sys Fri Oct 12 19:53:40 2007 - NVIDIA nForce System Management Controller (nVidia nForce chipset driver) - http://www.carrona.org/dvrref.html#nvsmu.sys
Summary of the BSOD:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Apr 16 09:33:42.633 2010 (GMT-4)
System Uptime: 0 days 10:42:31.849
BugCheck FC, {fffff8000304c0f0, 800000000304c963, fffff88002fb9540, 2}
*** WARNING: Unable to verify timestamp for nvhda64v.sys
*** ERROR: Module load completed but symbols could not be loaded for nvhda64v.sys
Probably caused by : hardware ( nvhda64v+cae8 )
BUGCHECK_STR: 0xFC
PROCESS_NAME: System

Read other 3 answers
RELEVANCY SCORE 60.4

So I tossed Windows 7 x64 RC onto my computer to give it a shot, and it runs really well--quite pleased with the progress made so far with Windows (actually brought me back from the dark side of OSX86 after I switched from Vista, which we won't get into, as it's not the time or the place).

In any event, lately (in the past couple of days) I've been getting random BSODs which usually happen when I'm not around the computer (either sleeping, or out doing other things or what have you), and I get this from the "More Info" on the "Windows has recovered from an unexpected error". I've been able to catch it happen a couple of times, and each time it's the same error to do with something related to a "Power State".

Here's the relevant info:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7100.2.0.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8005790060
BCP3: FFFFF80000B9C5A8
BCP4: FFFFFA8003AD5010
OS Version: 6_1_7100
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\101909-19312-01.dmp
C:\Users\Jon\AppData\Local\Temp\WER-31605-0.sysdata.xml

I've attached the dump file, and my system specs are in my profile, is the sysdata file required as well?

Hopefully someone can shed some light on how to fix the issue. I'm relatively quick with technical issues, but BSOD's are a whole other ballgame that admi... Read more

A:Relatively Frequent BSOD - Power State?

shaft0

We could do alot more with the actual dump file. can you go into c:\windows\minidump, zip the dump file (*.dmp) and upload it to us for debugging.

Thanks and let us know if you need help with any of that

Ken

Read other 5 answers
RELEVANCY SCORE 60.4

Hi Folks,

1st ... thanks for being there and your efforts.

This bug has been driving me mad now for some time and I am unable to clear it myself.

My system is a roll your own running Windows 7 Ultimate x64 from Day 1 (about 18 months ago) on an original Retail load. A complete hardware profile is included in the attachments (via Belarc Advisor). The C drive is a 128 GB Kingston SSD.

I'm really looking forward to seeing the back end of this problem as well as your diagnosis.


many many thanks in advance

A:BSOD - Power State Failure

There is only 1 dump in the`upload is the PC set to overwrite the previous dumps?
The key is to look for patterns in the dumps, that's hard to do on a single dump but there is some interesting things here

It appears you have a AMD Athlon(tm) II X4 645 Processor
But Windows is reporting Windows 7 Kernel Version 7601 (Service Pack 1) MP (3 procs) Free x64 the 3 procs part would mean 3 cores, in task manager on the performance tab how many CPU graphs are displayed 3 or 4?

These three Asus drivers are known to cause issues on WIN7 x64
ASACPI.sys Wed Jul 15 23:31:29 2009 (4A5E9F11)
AsIO.sys Mon Aug 3 03:03:16 2009 (4A768BB4)
AsUpIO.sys Sun Jul 5 22:21:38 2009 (4A515FB2)
They are part of the Asus AI suite, see if there is a update for your board on the Asus site.> ASUSTeK Computer Inc. -Support- Drivers and Download

wacommousefilter.sys Fri Feb 16 13:12:17 2007 From 2007 this is not a Win7 driver.
Wacom(tablet) Mouse Filter > Drivers | Wacom Americas

mv2.sys Wed Feb 6 16:02:40 2008 Another Vista driver

UltraVnc miniport driver2 > Download - UltraVNC - VNC - Remote Support Software - Remote Desktop Control - VNC - Free - OpenSource


Code:
**************************Mon Oct 1 14:52:51.948 2012 (UTC - 4:00)**************************

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\U... Read more

Read other 19 answers
RELEVANCY SCORE 60.4

i have 3 identical computer's and all crash to blue screen with a Power State Failure.i have not been able to figure out why. all system are fresh install of windows with windows updates and up to date drivers for there sites.system specs have been filled out windows 7 pro 64bit installed on ssd solo the 2x tb drives in raid 0 are for temp storage. ive come here cause i think ive been look at the problem to long and might be a simple fix im just not seeing

*edit* attached file been created using Seven forums utility

A:BSOD Power State Failure

The BSOD is caused by LSI Adapter, SAS2 2008 Falcon (c:\windows\system32\drivers\lsi_sas2.sys). And the driver is very old, of 2009.

I am totally against using third party storport drivers, but disabling it may need a clean install. In that case, your first try should be updating it from Download Search.

Also, you need to uninstall Virtual CloneDrive.

Let us know the results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006e2c570, fffff80004479518, fffffa800785e580}

*** WARNING: Unable to verify timestamp for lsi_sas2.sys
*** ERROR: Module load completed but symbols could not be loaded for lsi_sas2.sys
Probably caused by : lsi_sas2.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
************************... Read more

Read other 9 answers
RELEVANCY SCORE 60.4

OS -Windows 7
x86
Age of system around 3 years i guess
Age of OS installation - just reinstalled 1 years ago
Intel core 2 duo E6400 2.13 Ghz
NVIDIA GTX 560
Asus P5LD2-SE
Power Supply Xion 800 watt if i dont mistaken

The problem start about a month ago, many times when shutdown the shutdown is never finished, it will stuck at shutdown sign and will always end with a restart. after that it will show a recovery message at the next log in. if there anything i need to post please let me know, please help thx...

Perfmon.zip

Windows7_Vista_jcgriff2.zip

Read other answers
RELEVANCY SCORE 60.4

Details required:

OS : Windows 7 32 bit
Original OS: Windows XP
Full Retail Version
Age of Hardware: Motherboard & Processor - 3 years, Video Card - 1 year
Age of OS: less than a year; 6 months approx.

CPU: Intel Core2Duo E8400 3 GHz
Video Card: ATI Radeon HD 5670
Motherboard: Gigabyte P35-DS3R
Power Supply: not sure..

A:BSOD - Power State Failure

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

21 memory dumps from 14 Jul to 15 Oct 2011

MSINFO32 reports many STOP 0x9F errors dues to ewusbmdm.sys. This belongs to your "Huawei Mobile Connect" package from your Internet Service Provider fir the Huawei USB device that you're using. Please immediately install new Windows 7 compatible drivers (NOT Vista or XP drivers)

It also reports many STOP 0x116 and 0x117 errors blaming your ATI video card drivers. Please follow these steps to troubleshoot the video errors: http://www.sevenforums.com/crash-loc...eshooting.html

Samsung Kies is known to cause BSOD's on Win7 systems if using older drivers. Uninstall this program to see if it stops the BSOD's, then install freshly downloaded Win7 compatible drivers if you must use it.

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\101511-17175-01.dmp]
Built by: 7601.17640.x86fre.win7sp1_gdr.110622-1506
Debug session time: Fri Oct 14 16:07:18.854 2011 (UTC - 4:00)
System Uptime: 0 days 3:34:24.930
*** WARNING: Unable to verify timestamp for ewusbmdm.sys
*** ERROR: Module load completed but symbols could not be loaded for ewusbmdm.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: SYSTEM
FAILURE_BUCKET_ID: 0x9F_3_ewusbmdm_IMAGE_usbccgp.sys
Bugcheck code 0000009F
Arguments 00000003 86a1da00 82d75ae0 85dc6760
BiosVersion = F9
B... Read more

Read other 1 answers
RELEVANCY SCORE 60.4

Woke up one day a couple weeks ago to find my laptop's onboard fan screaming. I opened the laptop to find a lovely BSOD awaiting me. All I caught before I killed the power to the machine was the term "power state failure". I'm not sure what happened, and I'm not too concerned about it now, but I'd very much like to know exactly what happened.

DETAILS:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000009f
BCP1: 0000000000000004
BCP2: 0000000000000258
BCP3: FFFFFA80073AD040
BCP4: FFFFF80000B9C3D0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1



MINIDUMP FILE:
bsod_details_1.zip

A:BSOD power state failure

Hi,

The dump you've attached mentions memory corruption (most likely driver related until shown otherwise), although it also mentions nusb3hub.sys (NEC Electronics USB 3.0 Host Controller Driver). It's well known to cause BSODs. You can remove it yourself, or you can update it here. Choice is yours.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000009F, {4, 258, fffffa80073ad040, fffff80000b9c3d0}

Unable to load image \SystemRoot\system32\DRIVERS\nusb3hub.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nusb3hub.sys
*** ERROR: Module load completed but symbols could not be loaded for nusb3hub.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 3 answers
RELEVANCY SCORE 60.4

Hello there thats my first post here
i found this forum via google :P
i hope that someone is going to help me

but get to the point

im running windows 7 x64 on my
amd athlon 64 2x3.0 black edition+
chieftec 650w
radeon hd4870x2
and 8gb of ram

my windows was installed ~2 days ago
if im working on my pc it all works fine
but when i leave it for ~30 minutes it causes an bsod
ive been reading that i need to show to you some bsod view
so i downloaded the bat file from forum and runned it
heres the effort that i made:

test it
taste it
and tell me is that enough to check what causes the problem?

A:bsod driver power state

MSINFO32 reports these problem devices:

Quote:




RAID Controller PCI\VEN_105A&DEV_3F20&SUBSYS_3716105A&REV_00\4&15C850D&0&0048 The drivers for this device are not installed.

VF0420 Live! Cam Vista IM USB\VID_041E&PID_4064&MI_00\6&1296B4F5&0&0000 The drivers for this device are not installed.




You'll have to install the drivers for both of these devices

2 memory dump errors - a STOP 0x9F and a STOP 0x116
Both blame your video card drivers but they are 2 different type of errors
STOP 0x9F: http://www.carrona.org/bsodindx.html#0x0000009F
STOP 0x116: http://www.carrona.org/bsodindx.html#0x00000116

The first thing to do is this:
- download the latest version of the video card drivers for your system from http://www.ati.com DO NOT download the Catalyst Control Center. Download the display drivers only from just below the Catalyst Control Center
- uninstall all ATI stuff from your system using Control Panel...Programs...Uninstall a program
- install the freshly downloaded drivers and see if that stops the BSOD's.

Also, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:

Quote:




How To Find Drivers:
- search Googl... Read more

Read other 4 answers
RELEVANCY SCORE 60.4

Hello!

Can someone help me with this BSOD? I am trying to learn how to debug these, it will help a lot with my job!
So can you please walk me through the steps that your using to debug this?

(See attached Minidumps)

Thanks!

A:Help with another BSOD - Driver Power State 9F

Hi callumm2.

Your System specs says the computer is a Dell Optiplex 990 desktop, but it is a Dell Latitude E5420 laptop we are working with.

The source of the issue is the integrated card reader. O2Micro Integrated MMC/SD controller.

Code:
BugCheck 1000009F, {4, 258, fffffa80039d9b50, fffff80000b9c3d0}

*** WARNING: Unable to verify timestamp for o2sdjw7x64.sys
*** ERROR: Module load completed but symbols could not be loaded for o2sdjw7x64.sys
Implicit thread is now fffffa80`039d9b50
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : o2sdjw7x64.sys ( o2sdjw7x64+de64 )

Followup: MachineOwner
---------
And the driver is old enough.

Code:
Image name: o2sdjw7x64.sys
Timestamp: Tue Oct 11 00:43:54 2011 (4E9343F2)
Search for any possible update to it in Support | Dell US .... also search in Home - O2Micro.com too. If you find any, apply it.

If you dont find any feasible update, better you disable the card reader in Device Manager. Otherwise the BSODs will continue to occur.

Read other 8 answers
RELEVANCY SCORE 60.4

I have windows 8 installed on my home computer. The computer keeps shutting down on it's own and saying "Driver Power State Failure". Can someone look at my BSOD Minidump files and give me an idea of what could be causing this problem. I have tried to save the minidump files into a zip file, but it brings up an error not allowing me to do this. Hopefully the text file from Blue Screen view is enough to figure this out. Thanks.

==================================================
Dump File : 021413-31262-01.dmp
Crash Time : 2/14/2013 11:00:19 AM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`1c00e600
Parameter 3 : fffff800`49f58920
Parameter 4 : fffffa80`1b38fa00
Caused By Driver : atapi.sys
Caused By Address : atapi.sys+3474
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7a040
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\021413-31262-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 905,408

Dump File : 021313-22042-01.dmp
Crash Time : 2/13/2013 8:27:48 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`09a0d060
Parameter 3 : fffff803`f9af1920
Parameter 4 : fffffa80`09afb010
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7a040
Fi... Read more

A:BSOD-Power Failure state

what are you running
video card brand and model
cpu
m/board
ram
power supply
brand
model
wattage

check the listings in the bios for 12v line voltages and cpu temperatures and post them
 

Read other 3 answers
RELEVANCY SCORE 60.4

BSoD with Power State Failure
Usually occurs when idle, I come back to find my computer has shut down and on restart I get an error message:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8008599A00
BCP3: FFFFF80003FED3D8
BCP4: FFFFFA80093D1010
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Ran Windows Debug on the dump file and it says BSoD probably caused by ntoskrnl.exe, but how do I go about fixing this?

Thanks!


Specs:
? OS (original) - Windows 7
? x64
? retail version
? Age of system (hardware): 1 week
? Age of OS installation - 1 week

? CPU - Intel 2500K
? Video Card - Radeon HD 6870
? MotherBoard - MSI P67 G43 B3
? Power Supply - OCZ Modstream 600W

Self Build

A:BSoD - Power State Failure

Have you tried rebooting to last known good?

Read other 1 answers
RELEVANCY SCORE 60.4

This is a Brand New Build as in Built Yesterday. All was well till I woke up and saw that my pc rebooted on its own and I had a windows message. Mini Dump File is attached
031013-16421-01.dmp 3/10/2013 10:49:34 AM DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003 fffffa80`1ae02060 fffff880`00a877e0 fffffa80`1f4fd4d0 ntoskrnl.exe ntoskrnl.exe+7b040 x64 ntoskrnl.exe+7b040 C:\Windows\MiniDump\031013-16421-01.dmp 8 15 9200 1,091,816
Sys Info
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8 Pro, 64 bit
Processor: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 32591 Mb
Graphics Card: NVIDIA GeForce GTX 660, -2048 Mb
Hard Drives: C: Total - 243845 MB, Free - 156766 MB; F: Total - 1907726 MB, Free - 1826013 MB; H: Total - 953866 MB, Free - 947904 MB;
Motherboard: Gigabyte Technology Co., Ltd., Z77X-UP4 TH
Antivirus: AVAST FREE
 

A:BSOD Power State Failure

Read other 11 answers
RELEVANCY SCORE 60.4

Hey all.

Gotten the power state driver failure bsod a couple times now.. I like to think I take good care of my computer for the most part, and so with this happening a few more times then I would like, for what seems like no reason - I figure I should ask for some help in fixing it.

I got me a toshiba laptop AMD Turion X2 Dual Core RM-70
4GB SDRam
Vista Home Premium (64-bit)



Help is much appreciated

Thanks folks.

A:BSOD Power state driver

3 of the 5 BSOD's blame o2sdx64.sys - a component of your O2Micro Integrated MMC/SD controller.

Please download a fresh copy of the driver for the SD card reader from the Toshiba support website ( http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp# )
Then uninstall the one currently installed on your system.
Then install the freshly downloaded driver and check for further BSOD's.

Also, please remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall/remove:

Quote:




How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.




- some driver links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers:

Code:
AtiPcie.sys Mon Nov 06 11:59:54 2006 - ATI PCIE Driver for ATI PCIE chipset
mdmxsdk.sys Mon Jun 19 17:27:26 2006 - Conexant Diagnostic Interface DRIVER
QIOMe... Read more

Read other 1 answers
RELEVANCY SCORE 60.4

Hello,

Every since I had Telus Internet installed, my computer keeps giving me a BSOD when it goes to sleep. It's a Driver_Power_State_Failure ... 0x0000009F.

I don't get this with Shaw internet, only with Telus (I also have Optik TV on the same network). I still have both providers, and the computer is stable with shaw, but not with Telus.

I can eliminate the error by switching the Power Options so the hard drives "Never" turn off ... but I'm not sure what affect this has on the computer.

Please help, I don't understand mini-dumps and I've spent about 10 hrs on the phone.

My computer was orginally Vista, but my Hard drive crashed so I installed the full version of Windows 7 on the computer. Its 32 bit, on a 2-3 year old computer (Intel Core 2 Quad CPU Q9450).

I appreciate the help!

A:BSOD Power State Failure - Please help

Hi, Curtis. Sorry you are having problems. Your dumps are blaming e1e6232.sys, which is a LAN driver (network adapter) for the crashes. This driver is up to date and something else may be interfering with it.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0x82c1b000 PsLoadedModuleList = 0x82d63810
Debug session time: Mon Nov 22 21:55:01.429 2010 (GMT-5)
System Uptime: 0 days 0:54:38.224
Loading Kernel Symbols
...............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded module list
........
0: kd> !Analyze
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, 85e6db60, 82d41ae0, 85995328}

*** WARNING: Unable to verify timestamp for e1e6232.sys
*** ERROR: Module load completed but symbols could not be loaded for e1e6232.sys
Probably caused by : e1e6232.sys

Followup: Ma... Read more

Read other 9 answers
RELEVANCY SCORE 60.4

MSI S6000 running OEM windows 7 Home Premium 64 bit - 1.5 years
Intel I5
4GB Ram
Running IE 9

Any help greatly appreciated.

Mike

A:BSOD Power State Failure

Device Concerns:
Code:
Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64 ROOT\NET\0000 This device is disabled.
SBRE ROOT\LEGACY_SBRE\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Cisco is disabled when it is not in use. Probably not a problem.
For SBRE: SBRE, is reporting "tv_ConfigMgrErr24". - Microsoft Answers
Analysis:You have remnants of Sunbelt/GFI VIPRE or adaware on the system. It may also be a program I am unfamiliar with... System Control Manager, perhaps?

Something is interfering with your wireless network. I suspect security software, and since MSE and Malwarebytes are known to not cause issues, we should look elsewhere. What other security software do you have installed besides those two and System Control Manager?

SuperAntiSpyware also is known to be stable, by the way...
3rd Party Drivers:The following is for informational purposes only:
Code:
intelppm.sys Mon Jul 13 17:19:25 2009 (4A5BC0FD)
HECIx64.sys Thu Sep 17 13:54:16 2009 (4AB293E8)
RTKVHD64.sys Wed Nov 25 03:08:12 2009 (4B0D020C)
ETD.sys Mon Jan 18 05:37:56 2010 (4B545624)
IntcDAud.sys Wed Feb 3 06:38:31 2010 (4B697C57)
Impcd.sys Fri Feb 26 16:32:11 2010 (4B8859FB)
iaStor.sys Wed Mar 3 19:51:31 2010 (4B8F2033)
amdxata.sys Fri Mar 19 10:18:18 2010 (4BA3A3CA)
SBFWIM.sys Tue Feb 8 04:37:58 2011 (4D512B16)
sbtis.sys Tue Apr 5 12:12:37 2011 (4D9B5B95)
SbFw.sys Tue Apr 5 12:12:59 2011 (4D9B5BAB)
Rt64win7.sys Fri Jun 10 00... Read more

Read other 3 answers
RELEVANCY SCORE 60

Hello,

please can you help me with this BSOD?

Thank you

Petr

A:BSOD Driver power state failure

Welcome to SevenForums.

Looks like 5U877 UVC driver for Ricoh camera is the cause of the BSOD.

Description: Driver Reference Table - 5U877.sys

Code:
kd> !irp fffffa800a7f90c0
Irp is active with 18 stacks 15 is current (= 0xfffffa800a7f9580)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
..........
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e0 fffffa8009771a00 00000000 fffff880028c3350-00000000 Success Error Cancel
\Driver\usbccgp STREAM!SCDevWakeCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 1 fffffa80036ed050 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\5U877.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for 5U877.sys
*** ERROR: Module load completed but symbols could not be loaded for 5U877.sys
\Driver\5U877
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 fffffa800971e660 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa80085d2870

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm 5U877
start end module name
fffff880`0288c... Read more

Read other 1 answers
RELEVANCY SCORE 60

I am having the Driver Power State Failure . BSOD and the Driver Power State Failure msg. Hard to restart or shut down. I ran Windows Debugger and the mini dump msg. was.

Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

I am attaching dump file and also sending cloud link sending the link to my cloud with the entire mini dump file.

http://sdrv.ms/VJZV3y

Thank You
Allen Skaggs
 

Read other answers
RELEVANCY SCORE 60

Can someone look at the attached zip and help identify what is causing my "Device Power State Failure?"

Thanks in advance,

Tom

A:BSOD Device Power State Failure

What are you doing when the BSOD's happen?
The TSF_Vista_Support.zip file doesn't contain all the necessary files, please redo it.

Please try this stuff for starters:

Quote:




H/W Diagnostics:
Please start by running these hardware diagnostics:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: http://www.carrona.org/malware.html (read the details at the link)




The dump files point at sbp2port.sys - a component of the Windows Operating System. It is involved with the 1394 mass-storage driver - so the question is what do you have connected over this interface (a Seagate FreeAgent drive?)

If that's the case, remove the drive to see if that stops the BSOD's.

While your waiting for the next BSOD, Please update or remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager. Please use the following instructions to locate the most current drivers:

Quote:




How To Find Updated Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to g... Read more

Read other 1 answers
RELEVANCY SCORE 60

I'm getting daily BSOD failures, and was finally able to get some of the information. I've attached the zip file and hopefully someone can tell me what i need to do to remedy this. I've included as much information as i can find in my profile.

A:BSOD Driver Power State Failure

In your files, I only found 2 dump files, about a month apart. If you are having daily BSODs, please be sure your computer is configured to create small memory dumps. this will help you Dump Files - Configure Windows to Create on BSOD Pleas use the steps listed to create small memory dumps.

The first dump was on 5-9


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff800034c45da, fffff88003968fa8, fffff88003968800}
Probably caused by : memory_corruption ( nt!MiGetNextNode+2e )
Followup: MachineOwner
The second dump was in July of 2012 So really is of little importance at this point. However, I would suggest you update your Nvidia driver to the latest WHQL version I would also use this method to insure you get a clean install. NVIDIA Drivers - Avoid Problems

I would also, after doing the above like you to Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, noti... Read more

Read other 9 answers
RELEVANCY SCORE 60

Hi folks. I'm getting the Driver Power State Failure blue screen in Windows 7 x64. Here are my vitals:

It's an HP dv6-3052nr laptop with a fingerprint scanner.

? Windows 7 x64 Home Premium OEM - I have not reinstalled the OS since I got it from HP, and I am ok with doing that if need be.
? This is a brand new laptop, it's only like 2 months old at most
? Intel Core i7 720QM, 6GB ram
? ATI Mobility Radeon HD 5650
? No idea what the motherboard or power supply is

This is your run of the mill new laptop. I use it for web browsing and communication, but I use it as a music recording computer, so I have some music programs installed. Also, I have a USB audio interface for music recording as well.

The blue screen has happened twice in the last two days, and once a few days ago. I have been getting a popup dialog that says "Windows has recovered from an unexpected shutdown" on startup as well too; it happens after the blue screen error but it has also happened after I have closed the lid on the laptop. I think the cause is actually my fingerprint reader, because it has its own sleep/wake cycle and it doesn't always wake when I open my laptop up.

I have attached all requested files as per the BSOD posting instructions. I hope you guys can help me out! Thanks for everything.

Read other answers
RELEVANCY SCORE 60

After having to do a complete system restore (automatic repair loop) my computer now comes up with the Driver Power State Failure BSOD when restarting, shutting down and turning on normally works fine.
I don't really want to try and navigate through all the windows updates as that requires a lot of restarting, and usually some sort of software conflict means it all gets put back anyway.

As far as I can remember, the 47015-01.dmp and 41125-01.dmp occurred 8 hours earlier than the file creation time, as my time zone was set to UTC-8, and i'm on GMT.

Thanks in advance.

A:BSOD- Driver State Power Failure

Lenovo HD Disk Driver needs to be updated:


Code:
1: kd> lmvm LhdX64
start end module name
fffff880`01e97000 fffff880`01ea5000 LhdX64 (deferred)
Image path: \SystemRoot\System32\DRIVERS\LhdX64.sys
Image name: LhdX64.sys
Timestamp: Mon Jan 11 10:06:58 2010 (4B4B3E92)
CheckSum: 0001784C
ImageSize: 0000E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


While at their site, also update Intel and NVIDIA video drivers just to be nice to the system.

Consider removing AVG as a test, if necessary.

Read other 3 answers
RELEVANCY SCORE 60

I've searched the forums and this seems to be a common bsod but varying in drivers that need to be updated.

? OS - Windows 7 ?
? x64
hp dm1z laptop


Originally, my problem was that I would put my computer into sleep or hibernate and I would be unable to recover back into windows. HP helped me turn the power settings off and on thus resetting it and it fixed it.

But now my computer hits BSOD once it's been asleep for about 10-15 mins, extended periods. It'd show BSOD out of no where!

A:BSOD - Driver Power State Failure

Hi,

The single BSOD blames your wireless networking driver.

Code:
athrx.sys Tue Sep 22 14:47:11 2009 (4AB83AAF)
See if an update fixes it - http://welcome.hp.com/country/us/en/support.html

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Dec 17 18:21:38.883 2010 (GMT+13)
System Uptime: 0 days 0:55:21.662
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
Probably caused by : athrx.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0316aa20 fffff800`00b9c518 fffffa80`02f7c7d0
??????????????????????????????????????????????????????????????????????????????????????``

Read other 1 answers
RELEVANCY SCORE 60

Hello,

I have been receiving BSODs after a new build. I have been holding off on re-installing the OS to see if there is a fix for this error. I suspect it may have something to do with my samsung 950 pro nvme drive.

? Windows 10 Home
? x64
? Original installation
? full retail version
? 2 weeks
? 2 weks
? I have not re-installed the OS

? Intel Core i5 6600k
? EVGA 780 Ti
? Asus Maximus VIII Heor
? Seasonic Snow Silent 750 watt platinum

Read other answers
RELEVANCY SCORE 60

I'm running Windows 7 Home Premium on an HP Pavilion Elite e9180f machine. I have an Intel core i7 processor (2.66 GHz), 9GB RAM.

I received a BSOD when Windows was shutting down. The message said "DRIVER_POWER_STATE_FAILURE".

I've attached the results of running the BSOD_Vista_v2-2_jcgriff2_.bat file and perfmon.

Thank you in advance.


Brad

A:Bsod driver power state failure

Please start by going to Device Manager and right clicking on the Microsoft Teredo Tunneling Adapter(s). Select Uninstall and let it uninstall the adapter. Don't be surprised if the adapter doesn't come back when rebooting - the only problem would be if it still shows an error condition after rebooting.

I suspect that this will fix the BSOD's, but we'll have to look at the dump files and (at a minimum) replace the networking drivers just to be sure.

....Running the dump file now.....

The dump file blames e1y62x64.sys - a component of your Intel(R) PRO/1000 Gigabit Networking Adapter

Please download a copy of the latest Windows 7 64 bit driver for this device from the Intel Download Center ( http://downloadcenter.intel.com/Default.aspx )
Then uninstall the current Intel networking driver from your system
Then install the freshly downloaded driver and monitor for further BSOD's.

Please also update this driver: 000.fcl Fri Sep 26 09:11:22 2008
It is a component of the Cyberlink program installed on your system.

Summary of the BSOD:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Jan 28 19:05:24.908 2010 (GMT-5)
System Uptime: 0 days 10:14:11.188
BugCheck 9F, {3, fffffa80083a6060, fffff800044e8518, fffffa800b85a790}
*** WARNING: Unable to verify timestamp for e1y62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1y62x64.sys
Probably caused by : e1y62x64.sys
DEFAULT_BUCKET_ID: ... Read more

Read other 1 answers
RELEVANCY SCORE 60

Hello,

So recently, I got driver power state failure BSOD and I decided to refresh my laptop. I already updated my windows 8 but the problem still persist. I also noticed that some update fail to install when I restart my laptop. After that, everytime I turn on my laptop, my laptop freeze about 3 minute and then work normally. But if I shut down my laptop, it started to restart, but then after that I can shut down normally.

My .dmp file is attached below. Thank you for your help!

A:BSOD driver power state failure

Hi ardikur,

Welcome to the 8forums.

I see you have KMSpico, for what have you used KMSpico?

Read other 3 answers
RELEVANCY SCORE 60

I am getting these "driver power state failure" crashes with increasing frequency. I suspect it's a driver conflict involving my M-Audio Fast Track Ultra (music recording interface), which is connected via USB.

My computer is an HP 671-340US notebook, bought in June or July 2010, with Windows 7 Home Premium (and a whole bunch of HP bloatware!) already installed. I have eliminated some of the HP crap because it constantly interrupted my work, and shut down my computer right in the middle of what I was doing, if I missed the message balloon. Don't know if that contriubuted to the problem. I updated all the drivers and Win7 yesterday and today. Crashed again this morning. No hardware upgrades; using it the way it came.

I have attached all the system specs and diagnostics reports you requested.

If I missed anything, please let me know.

Thanks!

Charlie

A:BSOD Driver Power State Failure

  
Quote: Originally Posted by jgm34787


I am getting these "driver power state failure" crashes with increasing frequency. I suspect it's a driver conflict involving my M-Audio Fast Track Ultra (music recording interface), which is connected via USB.

My computer is an HP 671-340US notebook, bought in June or July 2010, with Windows 7 Home Premium (and a whole bunch of HP bloatware!) already installed. I have eliminated some of the HP crap because it constantly interrupted my work, and shut down my computer right in the middle of what I was doing, if I missed the message balloon. Don't know if that contriubuted to the problem. I updated all the drivers and Win7 yesterday and today. Crashed again this morning. No hardware upgrades; using it the way it came.

I have attached all the system specs and diagnostics reports you requested.

If I missed anything, please let me know.

Thanks!

Charlie


Hi charlie and welcome.

You are of course correct about M-audio. It is blamed. It may be conflicting with one of the older drivers installed. I would update both M-audio and these old drivers. Some of these drivers including y our raid driver is from as far back as 2005.


Code:
iirsp.sys 12/13/2005 5:47:54 PM fffff880`015a0000 fffff880`015b1000 0x00011000 0x439f418a
nfrd960.sys 6/6/2006 5:11:48 PM fffff880`016b3000 fffff880`016c3000 0x00010000 0x4485ef94 ... Read more

Read other 2 answers
RELEVANCY SCORE 60

Hello,

I have a BSOD problem that states Driver Power State Failure. I read it is caused by a problem with a change in the alimentation mode or something, but this BSOD really happens randomly (last time occurred while I was reading a web page... I didn't even touch a key or the mouse).

I'm running Windows 7 32bits, my laptop is 3 or 4 months old (windows 7 was already installed).

I tried to run the batch from the "Blue Screen of Death (BSOD) Posting Instructions", but no folder is created when it's done... I followed every step (also ran the batch as an admin) so I don't know where the problem is coming from. The batch runs smoothly until the end, but there is just no folder created in my Documents folder. (I don't know if this is normal, but on the line right after "We will begin in 5 seconds..." there is a message saying that "the path hasn't been found" (my os is in french, so I don't know exactly what is the original line in english) but the batch still runs to the end).

I attached my last 3 minidumps, the perfmon file and a msinfo32.nfo file.

Thanks in advance for your help!

A:BSOD Driver Power State Failure

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Read other 9 answers
RELEVANCY SCORE 60

Hi there, since last week (as far as I remember) I've been having this problem when I try to shutdown my PC.
It takes ages on the shutdown screen and then it crashes, prompting the BSOD.
I'm attaching the files requested made by the SF tool.

A:BSOD: Driver power state failure

Hello Lugdunon.

I guess the Cam3820 PC camera device that you are using in not very much compatible with your system, and the driver is of 2008.

Code:
0: kd> !irp fffffa8006cdbc10
Irp is active with 11 stacks 9 is current (= 0xfffffa8006cdbf20)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8008a97050 00000000 00000000-00000000
Unable to load image \SystemRoot\System32\Drivers\cam3820.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cam3820.sys
*** ERROR: Module... Read more

Read other 3 answers
RELEVANCY SCORE 60

Hello,
I have been getting a Driver power state failure bsod for about a week now. Some days it doesn't seem to occur that much while other its several times an hour. From googling it seems like the issue is either an out of date driver or my ram. I"ve run "whocrashed" and "bluescreenview" which point to

This was probably caused by the following module: ntoskrnl.exe (nt+0x14F9A0)
Bugcheck code: 0x9F (0x3, 0xFFFFE00101519060, 0xFFFFD0018AB69960, 0xFFFFE00106234C10)

but I guess this isn't the actual driver (or ram) causing the issue. Any help would be appreciated.

Thanks,

A:Driver power state failure BSOD

Hi jag213,

Welcome to the 8forums.

Please do the following:
Open an admin command prompt
Copy/paste "sfc/scannow" (without quotes) and press enter
When it finished reboot your system
Open again an admin command prompt
Enter sfc/scannow again
If sfc/scannow doesn't say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

Please fill in your system specsPlease go to this site and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

Read other 10 answers
RELEVANCY SCORE 60

Hey, I have been experiencing the BSOD for around 1-2 months now, its not that frequent but when it happens it consistently happens throughout the day, also after it relaunches the sound it all messed up and crackly. Im currently using the Alienware M17x which i heard it is quite common on, Any help would be greatly appreciated.

dump files in attachment


(Great my dump files are 9.37mb what can i do?)

A:BSOD - Driver state power failure

Not a clue what to do now, just found out my dump files are 9.37 MB which is over the limit you can put on here, any suggestions?

Read other 2 answers