Over 1 million tech questions and answers.

Corrupted data on 16MB Max Memory Card for PS2

Q: Corrupted data on 16MB Max Memory Card for PS2

So, here's the problem: I've got four blocks of corrupted data on my memory card. I've tried deleting them, but it doesn't work. I would ignore it, except now I cannot save anything new on it; If I try, that data will also become corrupted.

I've been searching online and unfortunately have yet to find a solution. I've tried putting an audio CD in and then deleting the corrupted data....Clearly, that didn't work.

I have also tried to format the card, but here's the thing: I cannot find the option where it says to format! I was hesitant to consider the option to format the card at first, seeing as all my data will be deleted, but I'll get rid of it all if that allows me to able to use this memory card. I've went into the memory card (where i can look at all the data), seeing if there are any format options- none.

(I tried attaching a picture to show that the memory card does not have an option to format. There are only two options: "Enter" and "Back".)

Help anyone?

Preferred Solution: Corrupted data on 16MB Max Memory Card for PS2

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Corrupted data on 16MB Max Memory Card for PS2

Anyone? I really need help. This is driving me insane and I'd just like to deal with it and get it out of the way already. Please....heeeeelp. :/

Read other 1 answers

I want to change the drive letter of my memory card, which shows up and is usable from My Computer but is not listed on disk management. I'm running Windows XP SP3 on a dell vostro 1400. Is there any reason for this? The card is a Canon SD Memory Card SDC-16M

A:Disk management does not list my 16MB memory card

Put in a memory card that the computer DOES see in disk management, change the drive letter, then put in other card & see if the computer can see it then. I really don't think changing drive letters is going to allow you to see a memory card, most likely it's dead, but it's worth a shot. Hope this helps, take care!

Read other 9 answers

For some reason all my word docs and xcel files held on my Leadtek memory stick have corrupted - does anyone know of a fix ...thanks

A:Corrupted Data on Memory Stick

Read other 6 answers

I have a 4GB Verbatim SD card that I used in my digital camera. Today, I realized that all the pictures that were there in the SD card are gone! When I try to see the pics in the camera itself, The camera says " No data in Image File". I connected the SD Card to my Desktop using a card reader but still, The folder which includes the images does not open. The error message says " J:\DCIM\108NIKON is not accessible. The file or directory is corrupted and unreadable."

I have some really important pictures and data on the SD Card so i can't format. Neither can I risk data loss. I want to recover all the data from the card. Is there a way to do it? Please Help...

A:SD Card corrupted, need to recover data...

this happens bad luck to u
it happened like 20 times to me i formatted mine and recovered it from a software called i care data recovery

Read other 15 answers


I am running Windows 7 64-bit on an HP Pavilion dm4 1265dx.

Tonight I was going through and editing pictures I took on my Nikon DSLR. It was working fine until all of a sudden my card reader crashed and wouldn't read the 8GB Sandisk SDHC card anymore.

I tried restarting but my computer wouldn't start up again unless I took the memory card out of the slot, as in the "Starting Windows" screen played but the sign-in screen wouldn't come up until I took the card out. It has repeated this performance at least 3 times since then when I've tried rebooting for various reasons in trying to fix this, I always have to take the card out before it will start up. Normally if I'm not using my camera I just leave the memory card in the card reader and my computer will start up without an issue.

When I insert the card into the card reader, it plays a sound that means it recognizes a new device has been inserted but autoplay doesn't come up. If I take the card out it makes the device removed sound. Also, while the card is in, it has been causing performance issues with my computer as well; Chrome crashes often, Control Panel is extraordinarily slow, and my Symantec virus protection tells me that it is turned off even though I haven't turned it off.

When I insert the "bad" card into my camera, it says that the card may be damaged and to insert another one. I was just using it earlier tonight to take pictures!!! None of the prongs are bent and the lock s... Read more

A:Memory Card Corrupted?

Hello Sarah looks like the card has had the Richard my friend one thing you could try I suppose are one of those shops you go to get to get pics printed off try it in one of their machines if it works ok then I would be doing a chkdsk on the machine Disk Check if the card doesn't work in the shop machine well it looks like you may have lost the work. How old is the card Sarah and has it been exposed to extremes of temps etc ?

Just as matter of interest have you had a very close look at the contacts on the card? I use those and usually 4GB ones and have never had this happen and just for the record mine never makes that sound inserting them or taking them out.

Read other 6 answers

So I have a MicroSD memory card for my Gopro. I had a project in Premiere that I was working on. I open it, Premiere asks where the project source files are located, I select the memory card. It freezes. Then, I force close it. When I go look at the files on the memory card I see this: http://prnt.sc/ab6csz - some of the video files are completely gone and I got this gibberish. The ones that stayed work. What do you think could happen? Can I somehow recover them? Has anyone had this issue before?
I know I should backup, but those video files weren't too important for me. I am just curious if there is a way to recover them, thanks.
I have tried Recuva and EaseUs Data Recovery, no luck.

Read other answers

Eek. I need help!

I recently got back from a vacation where I took many pictures. There were too many for the memory card (Sandisk 256mb), so I routinely downloaded them to my laptop via the "removable disk" drive. When I got home, I wanted to move them all to my home computer (which is XP, just like my laptop), so I put the memory card (which still had a number of pictures on it) in the laptop and selected the entire folder of pictures on the laptop, cut it, and tried pasting it to the card. I knew the folder was too large, but I thought it would just fill up and I could move them all in a few trips.

I pressed "cancel" after a message came up telling me the card was full, and then I pulled the memory card out from the laptop. I thought everything was fine. I have the same removable drive on my home computer, so I inserted the memory card, but nothing happened (usually a message comes up asking me what I want to do with the disk). I opened My Computer and tried to open the drive (which happens to be F on my computer), but it just said "Please insert disk into drive F." The card can't be read by anything -- none of three computers, nor the digital camera I had been using.

I downloaded some programs that are supposed to recover lost or corrupted files (Photorescue was one of them), but I got errors. The programs can recognize the drive, but it says that there is more than 2000gb of files on the memory card, which there certainly is not...... Read more

A:Corrupted memory card?

Read other 10 answers

I have a Gefoce2 MX-400 64MB GPU. But in the directx dialog box it shows that it has only 16MB of memory. I have an AMD Athlon XP 2000+ running on ASUS A7N266 motherboard, 256DDR RAM. Is it any hardware problem or software? Can it be rectified. I have 66.81 NVIDIA driver installed.

A:Geforce2 64MB AGP card shows 16MB in dxdiag!

Are you running in Windows XP? You should install Microsoft DirectX 9.0C.You should try to uninstall WIndows XP drivers for NVIDIA GF2 and reinstall Nvidia Forceware 56.72 first.

If it works, then download the latest version of ForceWare. (v66.93 in press time) and uninstall the old one first. Install the new version and check if it works. If not, keep 56.72. It works fine, you should not have to keep up all version for ForceWare.


Read other 1 answers

The title says it all - Thanks!

I have a old pc with a 245W PSU and I m thinking about upgrading the card.

A:Anybody know the power requirements of a NVIDIA RIVA TNT2 16mb graphics card?

Couldn't find a quick answer to this but if the "old" machine runs okay as it is then it should have no problem with the TNT2 card. They are a pretty old card and were designed for the machines of the day which (by today's standards) were pretty slow and didn't need a huge amount of power to get them going. I assume the "old" machine has a AGP slot to fit the card into?

Read other 3 answers

Please, help. How can I retreive photos from memory card that had been already formatted? This is XD fujifilm 512mb memory card. Unfortunatelly after formatting the card I have already taken 70 pictures. Is there any chance to have my pictures back??

A:how to retreive data from memory card

Read other 13 answers

I have an SD card, used in a Camera. I cannot access the data , (photos) that are on it. It seems to be full.

When I try to access the disk, I get "You may need to format the disk before you an use it".

Can anyone suggest / recommend a method of recovering my data?

I've looked at several commercial products but they seem to cost about 20. I only need to retrieve a few photos.

Thank you in advance.

Read other answers

Hello all,

My copy of Windows 7 Home Premium x64 on my laptop has been having some strange issues lately. I cannot run .msi files, and device manager never populates a full list. Sometimes (rarely, but it does repeat) Windows Explorer will freeze, and if I attempt to close it and reopen it using task manager, the UI reloads, but whenever I click on a folder it claims Windows cannot load explorer. Restarting fixes that. I scheduled and ran CHKDSK, and it repaired a few bad sectors, but it didn't fix any of these problems. I have run CCleaner (both the regular cleaner and registry fixer) and defragmented my hard drive until it's only 1% fragmented. I then tried sfc /scannow, and it read a bunch of corrupted files but could not repair them. I read that to fix sfc, you must download and run Windows System Update Readiness Tool. It has been running and "Searching for Updates on this Computer" for about an hour now, and I'm getting concerned that it's just not doing anything. It's not frozen, the bar keeps moving from left to right and I can click on and off of it. I also have the logs from sfc if anyone wants to take a look at them, they'll be attached. The computer isn't very old, and has an intel i3 and 4gb of ram. If you would like any extra information to help, please reply and I'll get back to you as fast as I can Any recommendations on where to go from here would be greatly appreciated.

Thanks so much for any and all help!

A:Many corrupted Windows7 files, SFC reads corrupted data but doesnt fix

Hi Qujibo,
First comment you said ran ccleaner REGISTRY cleaner, this is not advised, unless you know what your doing

If there is an UNDO backup from that utility RUN it.

SURT can quite easily run for a couple of hours.

There are a lot of Winsxs errors in your log.

AFTER surt has run


run the MXdiag report from this link
Windows Genuine and Activation Issue Posting Instructions

Was this OS only installed via sysprep a couple of days ago??


Read other 2 answers

Hi everyone..

My external USb Wd mybook box has 1 tb Seagate Sata 3 and i use original Wd disc as W7 installed... in My PC Case as sata II

Today my old problem appears again as Corrupted disc...
I have Get Data Back NTFS (and i used before plenty of times for recovery, loss data or unwanted deletions) but..

This time im stuck.. Becouse the disk i try to recover includes 870 gb (about) used disk space (only audio files) only 50gb (about) empty space... Thats too big for me to recover to other disks.. i don't have enough spaces that my other disks can handle..

I have about 300 gb FREE disk space in several disks or partitions include My thinkpad SL510 Notebook..
So my question is
wit keeping my lost data in corrupted disk first, can i take them slowly to this 300 gb spaces (i know i can) and after create somehow emty space (deleting those recovered 300 gb + 50 on corrupted disk) and
use that empty space for more recovery. ???? Or smilar solutions.. Becouse DISC PRICES IS HEAVY nowadays and really i'm out of budget with buying some
equipments upgrades..
Like creating slowly slowly some extra spaces (don't know how)

I know i look silly in situation becouse i know u should never write to same disc if you dont want to say goodbye to your files..

E-how happened (not necessary to read these part)

according my experiences Thats the mistakes... DOn't do those at the same tim... Read more

A:Data recovery problem, Can reach corrupted data but no external space.


Before you write more data or attempt to read data from the drive through Windows, I would suggest using a Live CD like SysRescueCD to boot from and access the HDD.

Read other 2 answers

Hi, I purchased this graphics card and installed it in an older P2 machine. All I get is black screen...no boot. Support page says to try different slot, so I tried them all. Suggestions? or is the card pooched?

A:NVIDIA TNT2 M64 16MB SVGA Graphics Card "PCI"

Read other 16 answers

I have an 8gb verisign usb that does not get recognized on any of my computers. it starts to get driver, and then i get usb device could not be configured error. i need to get the data that was on it. how can i get it back? i tried using recover my files pro, but that does not even pick it up. i also tried my usb on a linux live cd and it didnt show up there either. i really need the data that was on it. anyone know how i can get it back?

A:usb got corrupted need that data

Read other 6 answers

Today is a bad day for me. There is something wrong in my computer, and it lost all my office files. All office files can not be opened!!! Who can give me a hand? Thanks in my heart.

well,would you like to commend some office fix software to me?

A:help me with my corrupted data

G'day newding, Welcome to TSF!

There are a couple of things to mention here...

Firstly, have you installed/uninstalled any software recently?

If the answer is yes have you tried a System Restore from your Start Menu to restore the computer to an earlier time?

Secondly, which version of Microsoft Office? are you using?

Please post back with this information;then, we will be in a better position to assist you.

Kind Regards,

Read other 7 answers

Today I transferred my .ppt file from pc to flash card, at the end of operation copying stopped. I decided to check the integrity of source file and MS PowerPoint 2003 showed: PowerPoint Not Responding. Now I can't open my file.

Read other answers

This is my first post in this forum.
The Problem:
Today, I decided to defragment and optimise my 2TB external Hard Disk using Auslogics Defragmenter. Now, a little background here. The partition that I defragmented was a 1.8TB partition encrypted by VeraCrypt, a fork of TrueCrypt. After the defragmentation was completed, I found that several files have been corrupted. The files in which I could detect the corruption were all compressed files, compressed using Windows 10's default compression. I opened the files up in WinHex and I saw a curious thing: The end of all these corrupted files had a block of "DF DF DF" sequence. I am attaching a screenshot to illustrate the matter. Here is the Screenshot of the Problem.

Please note that, though the picture shows it's an arc file, it was still compressed by Windows compression. The curious thing is that, even though the files had those DF chunks, a cursory HEX Search of the raw data hard drive did not yield any such sequence. Of course, I didn't have the time to scan the whole 2TB HDD for those sequences.

I was scouring the internet for any sort of clue and I have found this: farmanager.com/enforum/viewtopic.php?t=318. Is the DF chunk some sort of compression voodoo?
Could you tell me if there is any way to possibly solve the problem? I already ran a Data Recovery Software but to no avail. I am absolutely frantic, and would be grateful if you could kindly help me solve the problem.

Read other answers

Okay, so I have an external harddrive (1tb) which has about 300 gigs of media on it. I was running TuneUp Utilities 2009 and one of the things it suggested was running disk scans of all the hard drives. I restarted the computer as instructed, and when it rebooted it started a disk scan of G: (the external HDD) as expected. It got to about 7%.

My common sense then hurled itself as far away from me as it possibly could and I decided to cancel the scan and run it another time when I didn't need the computer. So, I turned off the computer using the power button. Turned it back on, no problems, except half of the data on the external HDD is messed up. Same amount of space used up on it, but half of the folders all the contents are garbled. Folders and files that can't be deleted because the names are too long/invalid, all screwed up.

Fortunately, the other half of it seems alright. So...I'm willing to cut my losses and copy off the unharmed stuff and format the G: drive, but first I wanted to know if there was anything I could possibly do to salvage the rest of it.

Thanks in advance

A:Vista corrupted data help

chkdsk /r maybe??

Read other 1 answers

I was using Peachtree Accounting software and i'm not sure exactly what happened but whenever i try opening the database it tells me that it cannot determine the security priviledges and won't open. Who has any idea what i can do to recover the data? I have tried reinstalling the software but it doesn't help.

Read other answers

I bought a 16gb usb key from best buy a few months back. I used it for some normal every day jpg/doc transfer/backup. In the past few weeks I notice that data have been missing or corrupted from the key. Yesterday I copied about 400 images to it, today when I plug the key in, nothing is there. I did a normal format on the key before I made the copy yesterday. This is really strange, I wonder if I am doing something wrong? I have had some no name brand refurbished usb keys from many years before and never had any issues. Is there a way to check if the key is bad?

A:usb key missing or corrupted data..

You can test it with this free program :- http://www.softpedia.com/get/System/System-Miscellaneous/H2testw.shtml

It writes data to the stick then reads it back to check it's not corrupted.

Click on the first screen to choose English (unless you know German). Then click the 'Select Target' button and browse to the Usb stick. It's best to format the stick first so the program can test it all.

Read other 1 answers

Hi All,

My sister went into her folder on out External HDD, and found this:


Can anyone shine a light as to what has happened? I tihnk it may have something to do with a slight power problem we had a couple of days ago, when we suddenly lost power to the computer and once power was restored, I had to unplug the HDD in order to get it to be recognized on the computer. not sure if this could be the problem though as a file I put on there a couple of days a go has also screwed up.

However, the strangest thing is that the HDD is recognising this folder as being 58.5gb. Its not the only folder with this problem. All up theres around 6-7 folder that are all showing the same problem, and all showing a stupidly high amount fo GB's being taken up. however, when added together, they apparently make nearly a TB of Data, yet the 256gb HDD isn't saying its full and in fact has 80 odd GB's free. Also, I cannot delete any of these folder.

Can anyone be of any help?


A:[SOLVED] Corrupted Data on HDD

Hello Matthew, Welcome to TSF!

I would say that due to that power fluctuation you had, the data on this Drive is now corrupt and useless. Sorry!

If you can't read any of the files/folders, the only way to get your external HDD to work again would be to wipe it completely with an eraser-type program, such as, Darik's Boot N Nuke, or Killdisk; then, format it.

Darik's Boot N Nuke

(Click the coloured links.)

Kind Regards,

Read other 7 answers

I just had a little alert pop up on my system tray, telling me that a file was corrupted in the Prefetch data folder and to run chkdsk. I think I know what I did, I uninstalled Limewire in favor of another program, and did a search for anything to do with Limewire, including hidden files, and deleted them.

I figure since I don't have Limewire on the computer anymore, there's no harm done, right? It doesn't actually affect the integrity of the XP OS, does it? I'd hate to have to reinstall everything again for the umpteenth time, especially after I just purchased Acronis True Image.

A:Corrupted Prefetch Data?

I think you will be ok. Please do the following :Download install and update CcleanerAttention : the installation package comes with the Yahoo toolbarif you do not want that you have to, untick the box accepting it during installation process.After installing and updating go to options - advanced and tick prompt for registry back upsNow Start up in safe modeDo two runs1) Click on problems and tick all. Click on analyse. At the end you will be prompted for storing a backup. This will be stored, as a default, in My documents.2) Click on cleaner click on analyse and accept all files to be removed.

Read other 2 answers

I was trying to install Cyberlink PowerDVD on my windows, but after running setup, I got this message:
"The contents of this file cannot be unpacked. The executable you are attempting to run has been corrupted. Please obtain another copy of the file, verify its integrity, and try again."
I copied the setup folder to "Folder A" on my pc, tried running setup from HDD, and same error occured.
Then started windows in safe mode. ran setup from DVD again, and there was no problem. then tried setup from "Folder A", and again error. copied setup from DVD to "Folder B" on HDD and restarted windows XP sp2 normally.
Again tried both setups in normal session of windows. Setup will not run from "Folder A" which was copied under normal session of windows and will run from "Folder B" which was copied under safe mode.
I think "Folder A" contains corrupted data.
I also had this problem with some other installations/archives.

BTW I tried to run PowerDVD's setup under Windows vista and there was no problem.

at last you can find my computer info attached.
(my DVD drive is Sata)

What you think the problem is?

A:Corrupted data is being copied from DVD

Hello! anybody has a clue?

Read other 1 answers

I know I did 2 things wrong:
1) I didn't back up my hard drive
2) I turned off my computer in the middle of a Windows update

That being said, here is the story:

I had a 4 year old machine with XP loaded, and got a shiny new computer for Christmas (2010). I was in a hurry to swap the computers, and figured I could transfer the data later. So, while I was logging out of the old XP computer, I saw that a Windows update was installing. Snickering, I figured I would never need the computer again, and SHUT THE POWER OFF. After much research, and lots of regret, I understand I should never have done that.

When I tried to boot the old XP computer back up to transfer the data, it went into an endless boot/power off loop. Trying to boot in safe mode did not work. All options tried, including boot from a previous time, boot from last known good point, etc. Just a continuous boot/power off cycle.

I bought a IDE/SATA to USB cable which comes with a hard drive power supply, opened the hood, and hooked up the hard drive to my new computer.

[caveat: I did this the previous day to my 7 year old computer running Win98 and it worked perfectly]

I open the My Computer folder, plug in the USB, and 1st the recovery portion of the XP hard drive appears, then another hard drive appears (J:). The status bar progresses like it's loading data, then just stops. I left it for hours, no progress. I unhooked everything, powered down, and tried again, same result.

Can someone ... Read more

A:Please help me recover data from corrupted OS (XP)

Is it possible to install this old drive internally in the new PC? If you were to connect the drive with Disk Management open (close My Computer) how are the partitions of the old drive displayed? Do both show normal file systems?

Read other 2 answers

So I guess I installed a couple of bad sticks of mem and it corrupted my OS to the point that my comp wont' boot into windows.

So I purchased a usb enclosure thingy megingy and hooked up my laptop HD ( the bad one ) to my desktop. I can access the HD just fine but I can't see all the files. when I hover the mouse over the drive it shows 13GB used but when I actually go into the HD no folder even comes close to having that much data. some are just empty or just don't show up.

How can I recover the data on my HD?

A:New mem intall corrupted OS, need to recover data!!!

I doubt the RAM corrupted your hard drive. What error messages are you getting to make you think that?

Read other 2 answers

I had to do a restore on my computer and I did create a back up DVD of my data.  It went throught the whole process with no errors.  Then when I did the restore is acted like it did a complete restore but my data was not restored.  I have checked the DVD and it give me an error when I try to access the DVD.  I have tried using a program to look at the files it will show me the main file and all the sub files but I cannot open any of the files.  When I try to open a file it will hang the application and I have to kill the process.  It would be nice if I could get my data back as it is a pain in the ass not to have it.  And I see no reason why if the process of backing up the data did not provide an error message why I shouldn't be able to access it. Thank you, Ron Sliter

Read other answers

I plugged in my 80 gig maxtor usb ext hd into my desktop to put some files in it. When i clicked the 'safely remove harddrive' icon, and tried to remove it, it said i wasnt allowed to as some programs were still accessing it when nothing was. So i decided to pull it out anyway as i sometimes do when i get this message with my other ext hd or thumbdrives. I rarely do this, since i rarely get that problem.

But when i pulled it back into my laptop, it gives me an error 'Drive H is corrupted and inaccesible'. I tried it with my desktop. Same error. I checked the properties and it sayd the drive is working properly. But the space used and left is zero. The file type is RAW. What does this mean? I'm getting really worried as the files in my ext hd are very valuable to my work.

I took it to some service shops. the one i bought it off from said they used to be able to do retrieving but now their company policies dont allow them anymore, at 1 gig for 200 bucks. another shop said all they could do is to reformat it which i cant afford.

Can anyone please help me?

A:Corrupted Ext HD out of the blue. How can I retrieve my data?

Read other 10 answers

Hi there,

I need to extract a file from an old 3.5" floppy disk. However, I am unable to access it using an external A drive. When I try and access it, I hear the drive spinning for about a minute before I get the following message:

"You need to format the disk in drive A: before you can use it. Do you want to format it? Yes/No"

"No," then more spinning, then:

"A:\ is not accessible. The disk media is not recognized. It may not be formatted."

The reason that I'm not just accepting that the disk is a no-hoper is because I have a variety of old floppies which I've been trying to access recently and some I managed to access in spite of this message.

Those that I managed to do this with sounded like there was a mechanical problem when the disk span, so I tore the metal shutter off and that allowed me to access them. However, that hasn't worked with this disk and it's the only one I actually need to get data from!

I have made a cusory attempt to recover the data using EaseUS Data Recovery Wizard but because Explorer won't access the disk, the program doesn't see the drive. I've tried multiple external drives too so I know there's not a problem there.

Does anyone know of any way I might be able to access this disk? Because of the way I managed to access the other disks when they gave the exact same message, I'm convinced it's not entirely corrupted.

I'd be very grateful for any help.
... Read more

A:Recovering Data from an Old (Corrupted?) Floppy

I know of no way to do that. The floppies are just magnetic media, and given how old the data is, I'd not waste time trying to get it off (unless it's not backed up, of course). But truth told, I'm not certain it can be done satisfactorily.

Read other 3 answers

Hi All,
I m the newbee here, i read through the forum on windows 7 usb problem, however, i cannot find what i have encounted exactly, mostly you guys have the problem either stopped on the usb data transfer from windows 7 PC to a usb HDD or flash drive; or crashed and give errors. However, i dont encount this sreious problem but rather annoying problem.
As soon as i use my Windows 7 PC to copy a file to usb stick, the process is all ok, but when i read the file, it seems to be corrupted, example, if i have put a avi file in the usb drive, it will play as skipped.
I have updated the hotfix http://support.microsoft.com/kb/976972 but still doesnt fix my problem. I have updated the chipset driver from nvidia web site, still no help.

I know for sure that problem occured after i fresh installed to windows 7 from xp pro.

I have also tried to uninstall the usb root hub but still give me the same driver as it was.

anyone has similar problem? please advise, thanks alot,

A:Usb data transfer file corrupted

Quote: Originally Posted by pheebs

Hi All,
I m the newbee here, i read through the forum on windows 7 usb problem, however, i cannot find what i have encounted exactly, mostly you guys have the problem either stopped on the usb data transfer from windows 7 PC to a usb HDD or flash drive; or crashed and give errors. However, i dont encount this sreious problem but rather annoying problem.
As soon as i use my Windows 7 PC to copy a file to usb stick, the process is all ok, but when i read the file, it seems to be corrupted, example, if i have put a avi file in the usb drive, it will play as skipped.
I have updated the hotfix http://support.microsoft.com/kb/976972 but still doesnt fix my problem. I have updated the chipset driver from nvidia web site, still no help.

I know for sure that problem occured after i fresh installed to windows 7 from xp pro.

I have also tried to uninstall the usb root hub but still give me the same driver as it was.

anyone has similar problem? please advise, thanks alot,

Hi and welcome

One way to narrow the problem down would be to use a different copy utility like teracopy. if the problem changes its in win 7 if not might be hardware or driver

Good luck


Read other 5 answers

i have taken off the two HHD from my 6 Tera External ( WD ),
put them to my computer but they didn't work, then immediately
i returned them back to the external unit, but the RAID0 was corrupted
& it's didn't work, i don't care about it but the DATA inside it.

I used Data Recovery program it recovered the data tree,
but when i recovered the data mostly videos with their right size,
but one i opened more than 10 files none of them worked.

Do you know any good program or a good way to restore my data?

A:How to recover data from corrupted Raid0?!

Quote: Originally Posted by DaYiM

i have taken off the two HHD from my 6 Tera External ( WD ),
put them to my computer but they didn't work, then immediately
i returned them back to the external unit, but the RAID0 was corrupted
& it's didn't work, i don't care about it but the DATA inside it.

I used Data Recovery program it recovered the data tree,
but when i recovered the data mostly videos with their right size,
but one i opened more than 10 files none of them worked.

Do you know any good program or a good way to restore my data?

You had (2) 3 terabyte drives and you put them in your computer. After installing them in your PC did you go to your bios and define the raid volume of those two drives?

Read other 9 answers


I have recently been having trouble installing and running various programs on my computer (mainly microsoft office 2007 and itunes 9), when i do try to install the programs a microsoft window pops up and says "an error occurred while trying to create the directory C:DocumentsandSettings/AllUsers/Application Data"

I did try to resolve the problem by using my windows XP service pack 2 CD and completed the sfc /scannow (yes, with the space between sfc and /) yet i still cannot use many of my programs.

I have tried this solution twice now, restarting my computer before the second attempt, the scan took approximately 30mins each time.

Also, whenever i am able to use a program, a beige pop up appears in the notification area of the taskbar (near the clock) above a yellow triangle with an exclaimation mark inside, stating (for example, my security centre) "CA Security Centre: casc.exe - Corrupt File the file or directory \DocumentsandSettings/AllUsers/Application Data is corrupt and unreadable. Please run the Chkdsk utility."

I did run "Chkdsk /f", yet the computer says that it cannot lock the current drive.

I was wondering if there were any other possible solutions to my problem? Any help would be greatly appreciated.


A:Corrupted Application Data File


DocumentsandSettings is the wrong format - it is Documents and Settings.

\DocumentsandSettings/AllUsers/Application Data is thwe wrong format - it is \Documents and Settings\AllUsers\Application Data

'I did run "Chkdsk /f", yet the computer says that it cannot lock the current drive.'

An in-service drive cannot be checked - usually is asks if you would like to do this at the next boot. Did it?

Read other 5 answers

Recently my system was formatted and xp pro re-installed.....afterwards firefox had a problem of the page not loading...i fixed that by installing nvidia network manager.....but now another weird problem has arisen.....whenever i download something ,be it videos,programs etc. they are corrupt or incomplete, the computer says they are missing information or data etc. I thought it was a problem with firefox,so i installed flashget from an old cd...then it said an update was available...so i downloaded the latest flashget from the site....and when i tried to install it, it said 'data missing'....i tried every program and download manager i have on CDs......orbit,DAP,Opera and they download the files perfectly...but the downloaded file is corrupt or missing data......but......my p2p works perfectly...weird....

Read other answers

I have some data on a 256 MB flash drive that is corrupted and cannot be deleted. In addition, the disk cannot be formatted as a result of this corrupted data.

How can I get rid of this data on my drive?

Read other answers

Okay, here's the deal, my iPod was plugged into my computer, my computer decided to have a laugh and crash on me. It restarted itself and while the computer was starting up, the "Do Not Connect" message disappeared from my iPod and the regular menu appeared, and (perhaps stupidly) I disconnected my iPod from the computer.

Now when I turn on the iPod, I cannot access any of my songs or anything, it is as if the iPod is blank, however there has been no change in hard disk space, so it's all still there in some form, however I can no longer access the iPod through iTunes.

When I plug it in, Windows asks me if I want to scan and fix it, when I click ok, it goes through a long process of checking and then freezes when the progress bar is nearly at the end.

I all hope lost? What should I do?

A:Is there any way to recover corrupted data from an iPod?

Read other 10 answers

Hey, My user profile was corrupted. Basically, windows ran an update whilst i was backing up and that corrupted my user account.

I have tried the methods on this forum to restore the account and have tried a system restore with no success. I wan't to keep the files from my user account but how can I access or recover them?

Any help would be greatly appreciated.

A:Data recovery from corrupted profile?

can you do a system restore back a couple of days or no?

also Crucially if a profile is bad there are 3 things worth checking
a) Ensure the key name doesn't end in ".bad"
b) Ensure the RefCount value is 0
c) Ensure the State value is 0

under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

Read other 6 answers

When I try to boot my Lenovo Flex 3-1580, Windows 10-64bit, I get the following BSOD: "The Boot Configuration Data for your PC is missing or contains errors.
File: \EFI\Microsoft\Boot\BCD Error code: 0xc0000034"
I haven't been able to get it to try booting from a USB, but I did try reinstalling Windows. That failed when it told me to restart and it went back this issue.
When I tried to find solutions online, they all assumed the computer could boot, so were useless.
Any help is appreciated! Thank you!

A:Boot Configuration Data got corrupted

Hi toasterbot,
It's not an uncommon issue mate, and not that hard to fix. You will need to boot from your Windows disk to fix it .
Boot your computer using Windows installation media
Select the correct time and Keyboard type.
Click Repair your computer in the lower left corner.
Select Troubleshoot from Choose an option screen.
Click Advanced options in Troubleshoot screen.
Click on command Prompt.
Type these following commands one at a time and hit enter after each line of command:

Bootrec /fixmbr
Bootrec /fixboot
Bootrec /scanos
Bootrec /rebuildbcd
shutdown -s
After about a minute after the last command your machine will shutdown. You can remove the Windows media now.
Restart your machine.
Is your issue resolved?

Read other 1 answers

When I try to boot my Lenovo Flex 3-1580, Windows 10-64bit, I get the following BSOD:

"The Boot Configuration Data for your PC is missing or contains errors.
File: \EFI\Microsoft\Boot\BCD Error code: 0xc0000034"

I haven't been able to get it to try booting from a USB, but I did try reinstalling Windows. That failed when it told me to restart and it went back this issue.
When I tried to find solutions online, they all assumed the computer could boot, so were useless.
Any help is appreciated! Thank you!

Read other answers

A couple of days ago my Seagate Drive crashed whilst transferring files between my laptop and itself. After unplugging and replugging the drive was no longer readable and windows 10 demanded that formatting was the only way to view the device.

My first fix attempt was to put the drive into a new enclosure with a new wire, this changed nothing, windows 10 continued with the same error.

I tried using chkdsk on command prompt, but chkdsk was unable to proceed due to errors.

My next step was to use MiniTools partition wizard. The drive name showed up in partition wizard, and after running the wizard it correctly identified that 636GB of 980GB was used on the drive. I chose to apply the partition wizard's processes to attempt to rescue this data from the drive. After applying the changes, partition wizard changed the drive letter from G: to E:

The disk was still unreadable by windows 10. I then tried using chkdsk again, which began successfully this time. I ran chkdsk /f first, which appeared to fix all kinds of errors - before finally failing at the last 1% due to 'insufficient space to fix data master table'.

I then ran chkdsk /r which successfully got windows 10 to recognise the drive as 'Seagate Portable Drive'. I can now open the drive in windows.

However, the drive only shows that 5GB rather than the over 600GB of data I had, is stored on the device.

When I open it in explorer, I can only see the system files like 'Setup' 'War... Read more

Read other answers

Hey guyz!
Due to a program failuer (partition magic) some of the data are corrupted and some are deleted. By using PC inspector i could get almost all of them back but still some are corrupted. for example some JPGs and WAVs which are so so important to me!
by any chance do you know any program which can revover CORRUPTED files rather than try to undelete them???

this topic helped me out a bit but no one had correct answer to my problem!

Ill appreciate your help.

A:DATA recovery! (recover corrupted files)


Read other 3 answers

I recently purchased Knights of the Old Republic 1 & 2 (2 disk set). I have the first one installed but I get the error message- "Error decompressing data. Corrupted installer?" when I get to models.bif during the installation. I am currently using windows 8 (obviously) but the recommended specs for the games say windows 7. I do not know if this would effect the installation, if so is there a way for me to get windows 7? Any kind of feedback on my problem would be much appreciated. I would also like to apologize if I'm posting in the wrong sub-forum. I'm a little iffy on what the problem actually is.

Even just a simple- Sorry, we can't help will suffice as feedback at the moment.

A:Error decompressing data. Corrupted installer?

hello, and welcome to eightforums .
it could be that disk 2 is a bad disk. you could try installing in compatibility mode good luck
Compatibility Mode - Use in Windows 8

to get win7 you would need to purchase it from most computer stores

Read other 1 answers

Hi All,

I have a SanDisk Cruzer Crossfire 1GB. It was working fine, but the other day my wife's work PC crashed - in the middle of backing up some data to the Cruzer. Ever since then, it has failed to work.

If I plug it into our home (XP) PC, it recognises the stick and it shows up fine in My Computer. If you try to explore it, you get a generic disk i/o error message, or sometimes it reports that the drive is not formatted. If you attempt to format it fails to complete.

Now, I got in touch with SanDisk tech support and they have agreed to replace the stick, which is great. So... I downloaded an App from Data Doctor Recovery, which was able to go in and identify most of the files on the stick. I have now backed these up. The problem is that I don't want to send back the stick as it is because it contains personal data. So, I'd like to 'wipe' the stick first.

Many hours of browsing the net later, I cannot find anything that'll do this. Most I have tried don't recognise the drive, or report i/o errors when attempting to write.

I have tried using Disk Admin in the PC management, but the relevant options (such as delete partition) are greyed out.

Can anyone help me please by suggesting a method I could use to wipe the drive. Seeing that the Data Doctor was able to ignore bad sectors and find files, I am assuming that it must be possible to have an app that ignores bad sectors and wipes good ones...

Any ideas/sug... Read more

A:Deleting data from a corrupted USB storage device

I was sure there was an option to delete files as well on Data Recovery Doctor... I could be wrong though. Most other recovery programs will also have a delete section...



Read other 3 answers

here's the specs and then the problem.

2.7ghz celeron
512 ddr ram
soyo p4i845pe v1.0 mobo socket 478
120 gb hitachi deskstar sata hdd
40 gb western digital ide hdd
30 gb maxtor ide hdd
audigy 2 platinum
an array of pci cards but that is really irrelavant

this ight be lenghty and alot of it mught be erroneous but to give a complete picture of whats goin on heres how it goes.

the parts mentioned above minus the sound card, western digital hdd and hitachi sata is is about to be given to my grandparents when my new stuff gets here in the next few days (thanks to newegg)

the hitachi hdd is my primary drive and will be reformatted and put in the new rig that is on its way. i was bored and set up xp pro on the maxtor that is not staying with me. it had all my important stuff backed up on it. not a big deal i was going to back up all my stuff on the western digital drive off of the sata drive so i didn't care that i reformatted all my backup.

i got lazy and didn't back up all my data from the hitachi on to the western digital and well i think i got a virus and my xp pro has become unbootable on the hitachi. it hangs at the black screen with the scrolling blue bar and then reboots its self. so basically i am pretty sure i am S.O.L on getting back my music porn etc. about 20 gigs or so of stuff i have collected.

my mobo only supports a single sata hdd (no other type of sata device) it is only detected as the master no way to make it the slave. ... Read more

A:can't use ide to boot so i can get data off of sata drive that is corrupted

simpler way of putting it

i failed to mention or it wasn't made clear that i want to get my data off of the sata drive before i do a fresh install on my new rig thats coming. unless someone has a definite way of doing it i can bet i have already tried it. i am horribly stumped and am going crazy. i need the eqiuivalent of jumpering two ide drives to make one boot and the other not boot if that makes anymore sense.

Read other 9 answers

Yesterday tried to install apple quicktime. Install failed and then I started having problems with the D data drive: "inaccessible or corrupted" messages.
I can still see the folders, files and structure in file management. However attempting to move or copy anything fails. On boot win7 advised to check drive but that didn't work.
I ran western digital diagnostics off UBCD rescue cd, short and long tests no errors. Then I checked the win7 install with System File checker - no problems (didn't expect any, win7 boots fine). Then I tried chkdsk D:
This swiftly returned "orphan file found can't continue..." chkntfs returns "D is dirty.."

Now I am worried that if I run chkdsk /f this might be a disk wide problem and everything is going to become a .chk file
HELP advice needed!
I should add that I looked at system restore but no restore point was available prior to the apple install attempt - not sure why!
Should I attempt some data recovery first? I have a backup (paragon image) but it is a month old (due to this PC being a recent build and dilatory in setting up regular backup).
So I am hoping for some good advice from members more expert in working with ntfs problems like this...thanks

A:Quicktime install corrupted data drive

installed the drive into an xp box, chkdsk did its thing on booting looks like everything might be ok....??

Read other 3 answers

Hi 7 forum. Long time no post. I have a 16gb PNY flash drive. It has served me well for over 4 years, so it is possible it is just getting to old, but the data on it seems to have become corrupted somehow. I mainly

use this flash drive to transfer media from my Windows PC, to my Xbox or media player, to watch movies on my TV. Recently, I also started using it to run a couple programs, directly from it, one of them is called

Bitmessage (a p2p encrypted messaging program that can be ran portable from a flash for easy traveling) and noticed that on some occasions, when I would go to "safely remove the drive," it would say I could not

because something was still running and windows could not remove it. However, the issue here is that all programs were closed, there was nothing running in the task manager that would suggest that the drive should

not be able to shutdown and be removed safely. Therefore, when the option came up to force remove the drive, I would often click the continue button to remove it. This could be the issue that caused this. I

remember the last time it worked, I plugged it into my Xbox after moving some media files, watched them on my Xbox and then when I plugged the flash into my Windows computer the next day, it showed nothing on

the drive. It was just blank. Even the name of the drive, which I had renamed to something like "my flash drive," instead of its default name, was changed back to it's default name of "PNY 2.... Read more

A:Corrupted data on my flash drive. Retrieval possible?

If you have all data backed up, try to reformat the drive with HP USB Disk Storage Format Tool v2.2.3. HP USB Disk Storage Format Tool Download - Softpedia
(Rightclick on HPUSBDisk.exe and run as administrator and remove all other external drives . pen drives so that you do not format a wrong drive.)

In most cases if it refuses to format throwing out some error message, you can discard the drive. All the same post any exact error message thrown - if thrown.

Read other 3 answers

My account on the family computer was corrupted, and all my documents, pictures, MP3's, everything was lost.

I am still able to log onto my account, but it appears in the old Microsoft layout. None of my programs or anything is there, and the thing is, all five other accounts on the computer are fine. Mine was the only corrupted one.

Is there any possible way that I can retrieve all of my lost data?

Much appreciated.

A:User Account Corrupted - All Data Lost!

It's probable that your data isn't lost, only inaccessable.

Is this XP Home or XP Pro ?

Read other 16 answers