Over 1 million tech questions and answers.

WinXP Pro MS updates fails odd exception codes

Q: WinXP Pro MS updates fails odd exception codes

This desktop has Win XP Pro service pack 2.
Have had weird crashes with different programs used getting exception codes.
I normally use Firefox 3.x as browser but I thought maybe a fix would be to check Microsofts update website.
To do so I used IE 7.

MS update page says
Files required to use Microsoft Update are no longer registered or installed on your computer. To continue:

Register or reinstall the files for me now (Recommended)
then has a error code and goes to download again. and back to above.

MS update program is functional and started
I even went so far as to manually download SP3, it fails to install
I then installed Win XP Pro ( a overwrite and not blowing out all existing other programs)
that did nothing in allowing MS updates to work
Reinstalled the MS update program, made no difference

BIT protocol is working as needed for MS update program

In internet searching slants that the win XP has been hijacked and windows update is prevented from working ?

I downloaded the hijack program mentioned on this forum and results below

any help as I have a lot of software used in my work no longer supported and do not want to have to reformat and start all over again
At this point cannot do any MS updates, and have odd failures when running certain programs and vendors say not due to their software which had worked fine for years before this on this desktop

Many thanks for any help

Not sure what this log could pinpoint as to what the problem is

Added txt files of DDS program

GMER results has little info

GMER - http://www.gmer.net
Rootkit scan 2012-03-19 19:56:56
Windows 5.1.2600 Service Pack 2 Harddisk0\DR0 -> \Device\Ide\IdeDeviceP0T0L0-4 IBM-DPTA-371360 rev.P74DA32A
Running: fv34u83d.exe; Driver: C:\DOCUME~1\admin\LOCALS~1\Temp\ugtdrpow.sys
---- Kernel code sections - GMER 1.0.15 ----

pnidata C:\WINNT\system32\DRIVERS\secdrv.sys unknown last section [0xB7188F00, 0x24000, 0x48000000]
? C:\DOCUME~1\admin\LOCALS~1\Temp\mbr.sys The system cannot find the file specified. !

---- User code sections - GMER 1.0.15 ----

.text C:\Program Files\Mozilla Firefox\firefox.exe[2340] ntdll.dll!LdrLoadDll 7C9161CA 5 Bytes JMP 004013F0 C:\Program Files\Mozilla Firefox\firefox.exe (Firefox/Mozilla Corporation)

---- EOF - GMER 1.0.15 ----


Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 6:06:49 PM, on 3/19/2012
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.20627)
Boot mode: Normal

Running processes:
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Mozilla Firefox\firefox.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://teamzr1.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157" target="_blank" class="wLink">http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896" target="_blank" class="wLink">http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
R3 - URLSearchHook: SearchSettings Class - {E312764E-7706-43F1-8DAB-FCDD2B1E416D} - C:\Program Files\Search Settings\kb127\SearchSettings.dll
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
O2 - BHO: WormRadar.com IESiteBlocker.NavFilter - {3CA2F312-6F6E-4B53-A66E-4E65E497C8C0} - (no file)
O2 - BHO: Spybot-S&D IE Protection - {53707962-6F74-2D53-2644-206D7942484F} - C:\Program Files\Spybot - Search & Destroy\SDHelper.dll
O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll
O2 - BHO: SearchSettings Class - {E312764E-7706-43F1-8DAB-FCDD2B1E416D} - C:\Program Files\Search Settings\kb127\SearchSettings.dll
O2 - BHO: JQSIEStartDetectorImpl - {E7E6F031-17CE-4C07-BC86-EABFE594F69C} - C:\Program Files\Java\jre6\lib\deploy\jqs\ie\jqs_plugin.dll
O4 - HKLM\..\Run: [Synchronization Manager] mobsync.exe /logon
O4 - HKLM\..\Run: [SiSPower] Rundll32.exe SiSPower.dll,ModeAgent
O4 - HKLM\..\Run: [SoundMan] SOUNDMAN.EXE
O4 - HKCU\..\Run: [ctfmon.exe] C:\WINNT\system32\ctfmon.exe
O4 - HKUS\S-1-5-19\..\RunOnce: [^SetupICWDesktop] C:\Program Files\Internet Explorer\Connection Wizard\icwconn1.exe /desktop (User 'LOCAL SERVICE')
O4 - HKUS\S-1-5-19\..\RunOnce: [tscuninstall] %systemroot%\system32\tscupgrd.exe (User 'LOCAL SERVICE')
O4 - HKUS\S-1-5-19\..\RunOnce: [nltide_2] regsvr32 /s /n /i:U shell32 (User 'LOCAL SERVICE')
O4 - HKUS\S-1-5-19\..\RunOnce: [nltide_3] rundll32 advpack.dll,LaunchINFSectionEx nLite.inf,C,,4,N (User 'LOCAL SERVICE')
O4 - HKUS\S-1-5-19\..\RunOnce: [ShowDeskFix] regsvr32 /s /n /i:u shell32 (User 'LOCAL SERVICE')
O4 - HKUS\S-1-5-20\..\RunOnce: [^SetupICWDesktop] C:\Program Files\Internet Explorer\Connection Wizard\icwconn1.exe /desktop (User 'NETWORK SERVICE')
O4 - HKUS\S-1-5-18\..\RunOnce: [^SetupICWDesktop] C:\Program Files\Internet Explorer\Connection Wizard\icwconn1.exe /desktop (User 'SYSTEM')
O4 - HKUS\.DEFAULT\..\RunOnce: [^SetupICWDesktop] C:\Program Files\Internet Explorer\Connection Wizard\icwconn1.exe /desktop (User 'Default user')
O4 - Global Startup: Microsoft Office.lnk = C:\Program Files\Microsoft Office\Office10\OSA.EXE
O8 - Extra context menu item: E&xport to Microsoft Excel - res://C:\PROGRA~1\MICROS~2\Office10\EXCEL.EXE/3000
O9 - Extra button: (no name) - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\Program Files\Spybot - Search & Destroy\SDHelper.dll
O9 - Extra 'Tools' menuitem: Spybot - Search && Destroy Configuration - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\Program Files\Spybot - Search & Destroy\SDHelper.dll
O9 - Extra button: (no name) - {e2e2dd38-d088-4134-82b7-f2ba38496583} - C:\WINNT\Network Diagnostic\xpnetdiag.exe
O9 - Extra 'Tools' menuitem: @xpsp3res.dll,-20001 - {e2e2dd38-d088-4134-82b7-f2ba38496583} - C:\WINNT\Network Diagnostic\xpnetdiag.exe
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O10 - Unknown file in Winsock LSP: c:\winnt\system32\nwprovau.dll
O16 - DPF: {6414512B-B978-451D-A0D8-FCFDF33E833C} (WUWebControl Class) - http://update.microsoft.com/microsoftupdate/v6/V5Controls/en/x86/client/wuweb_site.cab?1332200817671
O16 - DPF: {6E32070A-766D-4EE6-879C-DC1FA91D2FC3} (MUWebControl Class) - http://update.microsoft.com/microsoftupdate/v6/V5Controls/en/x86/client/muweb_site.cab?1332200789515
O22 - SharedTaskScheduler: Browseui preloader - {438755C2-A8BA-11D1-B96B-00A0C90312E1} - C:\WINNT\system32\browseui.dll
O22 - SharedTaskScheduler: Component Categories cache daemon - {8C7461EF-2B13-11d2-BE35-3078302C2030} - C:\WINNT\system32\browseui.dll
O23 - Service: Java Quick Starter (JavaQuickStarterService) - Sun Microsystems, Inc. - C:\Program Files\Java\jre6\bin\jqs.exe
O23 - Service: NBService - Nero AG - C:\Program Files\Nero\Nero 7\Nero BackItUp\NBService.exe
O23 - Service: NMIndexingService - Nero AG - C:\Program Files\Common Files\Ahead\Lib\NMIndexingService.exe
O23 - Service: Remote Packet Capture Protocol v.0 (experimental) (rpcapd) - CACE Technologies, Inc. - C:\Program Files\WinPcap\rpcapd.exe

End of file - 5823 bytes

Preferred Solution: WinXP Pro MS updates fails odd exception codes

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: WinXP Pro MS updates fails odd exception codes

Bump, I posted this 2 days ago and really need some advise on a cure as I need this P/C functional for my work

Thanks for any help

Read other 1 answers

I had this problem before in Oct. 2006 with my computer at home and put drivecleaner 2006 on it and it corrected the problem. Now my symantec and pestpatrol caught it as spyware and and all and I'm kind of confussed on where to put it back on my computer or not! Any advice. I have Window XP Pro.

A:Windows Updates Fails To Update With No Error Codes.

Drive Cleaner is a program that displays exaggerated reports of security and privacy risks on your computer. Before you can fix these risks, though, the program requires you to purchase the commercial version of the software. Due to this Symantec labels this program a security risk. A screenshot of this program can be seen below.How To Remove Drivecleaner 2006

Read other 1 answers


I im trying to help a friend with his computer. It tries to install these 2 updates but it fails every time.

The computer is running Win 7 32 bit. Antivirus is MSS and I have tried to turn off "Real Time Protection"
Have also scanned the computer for malware with: mbam, combofix and Hitman Pro

I have tried several times. Also in Clean Boot.

I have also tried to uninstall Explorer 9 both automatically and manually with no luck.

The first time i ran the System Update Readiness Tool the logs pointed me towards KB2817183.
I downloaded this pack and expanded the .mum and the .cat files to ...\Servicing\Packages folder and then ran the SURT again.

This time it fixed most of the errors, but the errors in the log below remains. I have tried to download the files both in English and Norwegian version with no luck.

Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 19.0
2013-08-06 20:29
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB2817183~31bf3856ad364e35~x86~~ Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB2817183~31bf3856ad364e35~x86~~
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Seconds executed: 339
Found 2 errors
CBS MUM Corrupt Total count: 1
CBS Catalog Corrupt Total count: 1
Un... Read more

A:Windows 7 SP1 and IE 9 updates fails. Error codes: 9C48 & 800B0100

Hello Stefan,

SFC has detected a corrupt IE9 component, so I'm hoping that's the cause of the 9C48! Your 0x800B0100 is really easy to fix though

2013-08-06 22:39:46, Info CSI 000001f4 [SR] Repairing 1 components
2013-08-06 22:39:46, Info CSI 000001f5 [SR] Beginning Verify and Repair transaction
2013-08-06 22:39:46, Info CSI 000001f6 Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_9.4.8112.16476_none_2b91a7303c93d6f9\mshtml.tlb do not match actual file [l:20{10}]"mshtml.tlb" :
Found: {l:32 b:4En8FhvcAG3Ct2c/BaKK5640W5y6Wk9Qr/gE9QFwJ7E=} Expected: {l:32 b:VoO39KrqPaQa1fo6GCNd7e3yPabt+mQA4Xv9Y4sw70M=}
2013-08-06 22:39:46, Info CSI 000001f7 [SR] Cannot repair member file [l:20{10}]"mshtml.tlb" of Microsoft-Windows-IE-HTMLRendering, Version = 9.4.8112.16476, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-08-06 22:39:47, Info CSI 000001f8 Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_9.4.8112.16476_none_2b91a7303c93d6f9\mshtml.tlb do not match actual file [l:20{10}]"mshtml.tlb" :
Found: {l:32 b:4En8FhvcAG3Ct2c/BaKK5640W5y6Wk9Qr/gE9QFwJ7E=} Expected: {l:32 b:VoO39KrqPaQa1fo6GCNd7e... Read more

Read other 4 answers


This is quite a complicated one, I think. About a year ago, my dad and I decided to update our old household PC. We bought a new motherboard, new processors, new RAM, new graphics card - everything. Since then I've had the occasional BSOD, maybe once a week - never with a regular cause that I can see - and every time decided that trying to sort it out was for another day. Well, today I've had four BSODs, and enough is enough. If hardware information is required, then just say and I'll upload it.

Exception codes are numerous but the most common is 0xc0000005.

Computer information:

- Windows 7 Professional X64
- Full retail
- Hardware setup is roughly a year old.
- If memory serves, the OS has not been re-installed since then.

A:Persistent BSOD - various exception codes

Quote: Originally Posted by robbro7


This is quite a complicated one, I think. About a year ago, my dad and I decided to update our old household PC. We bought a new motherboard, new processors, new RAM, new graphics card - everything. Since then I've had the occasional BSOD, maybe once a week - never with a regular cause that I can see - and every time decided that trying to sort it out was for another day. Well, today I've had four BSODs, and enough is enough. If hardware information is required, then just say and I'll upload it.

Exception codes are numerous but the most common is 0xc0000005.

Computer information:

- Windows 7 Professional X64
- Full retail
- Hardware setup is roughly a year old.
- If memory serves, the OS has not been re-installed since then.

These crashes were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier

I'd suggest that you first backup ... Read more

Read other 1 answers

oh me guys I need somebody really crafty!
i have a HP Pavilion laptop [dv5117ci] with factory load XP Pro SP2and factory restore discs. the system became corrupted by a failed Win update.
it had multiple files showing bad, so rather than chase them one at a time for an unknowable number of days, I decided to create a new directory and install fresh copy of WinXP Pro

That looked like it was going to work but after being up on the initial boot, wobbly, for about 45 minutes, something caused a freeze, and I was toasted after that. Same routine again: bootup, get error "Windows failed to start because the following file is missing or corrupt". so back into chasing one after another ad infinitum.

All day I have tried to get something to work so I could get the data off the system then nuke it. I can't get anything up and running so I can remove files.

Anyone have a suggestion? is there an "xp light" or something that maybe just does the MINIMUM kind of load, just enough to get win explorer running so I can copy files?

A:WinXP Pro Corrupted - Repair fails - Parallel Install Fails

Read other 8 answers

Hi all,

In the past few months I've added a 512 stick of RAM and replaced the hard drive in my five year old laptop with a brand new Seagate Momentus. The laptop itself is a Pentium M 1.8 running Windows XP Home (Service Pack 3). Also in the past few months I've started receiving BSOD's for Machine Check Exception errors. The numbers tend to vary, though I can never catch one long enough to write them down, as the system flashes the error screen and then shuts off or reboots.

I've run MemTest as recently as this afternoon and the results came back with no errors found in the memory. I ran a SMART test from SpeedFan on the new HD and it was deemed perfectly fit. Still, I can't shake the feeling there's something going on with the new hardware in this laptop, as I had never even heard of a Machine Check Exception since I never got one until some time after installing the parts.

I notice I get this specific error when playing a computer game (Diablo 2, for Christ's sake, so the game isn't particularly taxing!) or watching video, ie intensive activities. It never happens while just browsing the net. I am not overclocking the processor. In fact, I'm undervolting it to keep heat down, though I've turned off Notebook Hardware Control to go back to normal voltage setting and I still get the Machine Check Exception errors with the same frequency.

I'm at wit's end here and I cannot afford a new machine at the moment so I&#... Read more

A:Repeated Machine Check Exception errors, number codes change

Read other 8 answers

Good day,

I have a user running Windows XP Home on a Dell Dimension 4600.

He has been using the system every day and not turning it off at night. Suddenly yesterday he got a blue screen with the following message:

WINDOWS IS BEING SHUT DOWN TO PROTECT ITSELF (or something like that). The codes at the bottom of the screen are thus:

OX0000007E 00C000007E 0X804DB548 0XF89C7BDC 0XF89C78D8

Any help would be very much appreciated.

A:WinXP Home, Blue Screen (codes below), PLEASE HELP!

Several things can cause this including hardware incompatability. Look at the Event viewer to see if there is any more information there.

Read other 8 answers

Hello. I have tried my best to do everything recommended here to solve the issue of failed installments of windows updates:

Fix: Windows Updates fail to install in Windows 7 | 8

Obviously, I haven't been successful. I am not very good with computers, so I would appreciate your patience as you help me with this problem.

Thank you for your help.

A:Windows Update Fails to Install: error codes 800B0100 and 9C47

Attachment 286200

Here is the CBS zip.

Read other 9 answers


Recently had a work laptop passed onto me as part of my new job.

I cannot get Windows Update to work - either minor updates or IE11 which is the only important update to install.

IE11 fails on install, the minor updates fail to configure after rebooting after an update.

I have tried every solution I can find on the internet but cannot get it to work at all.

Not sure if this is part of the problem but I changed the main admin user name following this seven forums tutorial:

User Profile Folder - Change User Account Folder Name

It all went to plan except couldn't do step 22 as have Windows 7 Home Premium.

This is driving me up the wall - I have spent hours trying to fix it and am getting nowhere.

Has anyone got any advice I can try?



A:Windows Update fails repeatedly. Codes 8007054F, 9C59, 800F0826

Please follow the Windows Update Posting Instructions and post the requested data

Read other 9 answers


I hope yall are doing well and that you can possibly help me figure what is wrong with my computer and help me fix it!

I have an Acer Aspire that I purchased in July. Over the past month, it has failed to start multiple times. It does this when I leave my computer on for a while...the screen will just go black. And I have to do a hard power off. Only to open it up and do the Windows Restore or whatever it is called. It has done this also upon starting the computer after I've shut it down the usual way. It doesn't do this every time. But I'd say 2 out of 3.

I have chosen the advanced restore options (restore the computer to a previous point in time). Picked a date that was listed and then it was restored.

Only to continue "failed to start" processes over and over again. I'm not going to try right, but If I were to shut down and reboot right now...I am almost certain it would do it again. It has literally done this around 15 times.

It has given me a couple of different reason:
Last week it said: Root Cause Found: Unspecified changes to system configuration might have caused the problem. Repair Action: System Restore
Result: Failed Error Code: 0x1f

Yesterday, it failed to start again and gave me the following error codes:
0x1f (again) AND System Files Integrity Check & Repair- Failed: error code: 0x490

How can I go about addressing and fixing this issue?

Your help will be greatly appreciated! Thanks in advance

A:Windows Fails to Start Multiple Times. Err Codes: 0x1f and 0x490 etc

Boot into the Win7 DVD or System Repair Disk to run a few Startup Repairs to see if it finds anything to repair.

If not then from the bootable recovery Options list run System Restore to the earliest Restore point to see if you can get before the problem.

If not boot into Command Line option to run SFC /SCANNOW Command

Run a full Malwarebytes scan in Safe Mode if necessary, or use a bootable AV as shown in Troubleshooting Windows 7 Failure to Start which has every other possible step to clear up boot problems with Win7.

Read other 9 answers

EDIT: Please see my updated information a few posts down.

Hello, I'm having issues on a Windows 7 64 bit system. If the updates install, then upon restart it fails configuration and reverts back. Otherwise the the updates will fail and I get the following when using the windows fix it for windows update tool.

I am running a sfc /scannow currently. The failure code on all the updates is 80200001.

Thanks for any help.

update: the sfc /scannow

"Verification 100% complete.

Windows Resource Protection did not find any integrity violations."

A:Windows Updates Fails configuring updates and reverts back

Hi bro,I had the same problem 3 days ago and I have solved the problem so, I think, I can help you,first of all I need to know if you have any antivirus tool intalled on your computer,if it so,[download CLEANER sofware from filehippo.com-it's important]uninstall them,for this action use safe mode by pressing F8 button,when you boot with safe mod you will not be able to uninstall your antivirus,because you have loaded only the drivers that needs safe mod,that's why you must delete your antivirus manually,for best result go to control panel-->folder options-->mark "show hidden files,folders,archives" apply and ok then go to user folder and open AppData\Local\"antivirus folder" and delete it,after this open AppData\Roaming\"antivirus folder" and delete it as well,at the end,you have to delete the main folder of your antivirus,that is installed on C or another drive.for example:C:\Program Files\ESET.After that open cleaner go to REGISTRY and scan for issues and if you get[I am sure you will get errors] any problem,fix them[delete them,you don't need to save registry settings before deleting] after cleaning registry, you have to run cleaner,so, go to software main window and press RUN CLEANER button[it's the last step] and restart your computer with normal mode.Now you can install updates and configure your windows safely.I hope this will help you

Read other 6 answers

I installed FileMaker software on windows 8 m/c. But I am facing crash issue. 
I checked on FileMaker site and found this software support .Net framework version 4.5 or later . On this .Net framework version no is 4.6.1. But in application logs it show - 4.0.30319. Here in this image ,is it showing .Net framework version ??

How to solve this crash issue ?? 

Read other answers

I have tried to update the NVM firmware on the thunderbolt controller and it fails with an unhandled exception. This ony appears when you run the exe from the C:\Drivers folder. If run from the installer the window dissapears and no error message is shown. I am using the latest (22 Nov 2018) Firmware ( from here: https://pcsupport.lenovo.com/gb/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-... Error is as follows:Unhandled Exception: System.Windows.Markup.XamlParseException: 'The invocation of the constructor on type 'FwUpdateTool.MainWindow' that matches the specified binding constraints threw an exception.' Line number '3' and line position '9'. ---> System.IndexOutOfRangeException: Index was outside the bounds of the array. Many thanksChris

Read other answers

I really need help with the updates on this computer. It says I have like 44 updates on the computer and I really don't know why it keeps coming up with error message and codes every time so I am doing each update 1 by 1 and some are going through
and others are still error messages most are related to office 13 application and security for apps. can someone please tell me how to make the computer faster and update without errors.?

Read other answers

i have 20 window updates that have failed to install since dec 08. i keep getting error codes like 652. secondly i can not install new programmes. kindly advice

Read other answers

Followed the windows update instructions as follows:


A:22 Failed Updates, 3 Error Codes

Here's the Summary from the CheckSUR.log

Seconds executed: 2157
Found 71 errors
CSI Manifest All Zeros Total count: 41
CBS MUM Corrupt Total count: 15
CBS Catalog Corrupt Total count: 15
Unavailable repair files:
winsxs\manifests\amd64_netfx-sos_dll_b03f5f7f11d50a3a_6.1.7601.18529_none_a09f7455a2ff8502.manifest... Read more

Read other 9 answers


I have a ton of Updates, Sec. Updates, and hot fixes installed on WinXP. Is it ok for me to uninstall all but the most recent udates and hotfixes out of the previously listed categories without problems?

A:WinXP- Updates, Security Updates, Hotfixes

No, you shouldn't uninstall any updates.

Read other 2 answers

OS: Windows 8.1 Pro. fully patched and updated.
I have a user who connects to several systems which require JRE on the local pc. Java version 1.8.0_77 was installed and working correctly.  The user has been successfully logging into the different systems without issue until last Thursday.  When
attempting to log in to a system that she doesn't use very often, she is told that she cannot continue because that system requires java version 1.7.0_?? to 1.8.0_51 to run.  I installed 1.8.0_51 and she tried again.  she still got the same error,
so I uninstalled 1.8.0_77 and she tried again.  This time the interface told her that no version of Java was installed.  I verified that, indeed, Java was installed, had her reboot and try again.  Same error.  So then I uninstalled 1.8.0_51,
and verified that the registry was clean of Java references, rebooted her computer and tried to reinstall the current version, build 77.  THIS time, the installation started normally, but when the "downloading java" screen popped up (the one
with the small green bar that goes across as it downloads), the window went away after about a second or maybe two, and nothing else happened.  A look at Task manager indicated that no installation routines were running.  A look at Programs and Features
in the control panel showed no installation of Java.  Testing with IE showed that Java wasn't installed either.  A look at the event... Read more

Read other answers

Dear sevenforumers,

I was checking my updates again and noticed I still haven't installed a few windows updates, 5 of which were "important".

I haven't got much experience in deciding when to install an update and when not, usually I try to figure this out by asking for others opinions and searching on the forums.

Here is a list of updates that I could not decide on whether installing them would be beneficial or not.
It would be awesome if you could help me in this matter.

Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD Graphics 4600

My laptop: GE70-i550M287FD, running on Win7 Ultimate 64-bit.
Thank you in advance!


A:Question about instaling some windows updates or not. (KB codes)

Kb2574819 is reasonably important - it's a security enhancement
KB2592687 isn't really important unless you use Remote Desktop at all
Kb2973337 is important - it's a security enhancement
Kb2985461 is a bugfix - but not one you're likely to need.
Kb2998527 is a Time Zone Update - and will probably have been superseded by a more recent one anyhow
Kb3000869 is important - it's s security bugfix.
Kb3001554 is optional and possibly unnecessary unless you're playing DVDs a lot.

You should check with your laptop's manufacturer about the Driver updates - they may have more recent ones, or they may use tweaked ones.

Read other 3 answers

I have an HP G30-630US laptop with W7.

I am unable to download or install any Windows Updates. The service freezes for a long time and results in Error Code 80246008.

I contacted HP Support twice and took the following actions without success:

1. I went to Control Panel/System & Security/Admin Tools/Services and clicked on BITS. The description states "Failed to Read Description. Error Code 2." I made sure that "Start Up Type" was on "Automatic (Delayed Start)." The service was stopped. I clicked "Start" and got Error Code 126 ("The specified module could not be found").

2. I completed a System Restore and went back as far as I could (early October 2010) with no luck.

I have three other HP desktops with W7. All of my computers run substantially the same software which includes Spybot, Malwarebytes and Avast 5.0 antivirus. My other computers get Windows Updates with no issues. There are no other functionality problems that I can see with my laptop.

Can you help me?

A:CAN'T Install Windows Updates - Two Error Codes

Are you referring to manual updates from Windows Update website, Automatic Updates, or both?

Read other 7 answers


I have these two update errors occurring every time I shut down the PC:

MS14-046: Description of the security update for the .NET Framework 3.5.1 on Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1: August 12, 2014
Error code: 80070070

MS14-026: Description of the security update for the .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: May 13, 2014
Error code: 666

CBS (on my Dropbox, since it was too large to be uploaded here): https://dl.dropboxusercontent.com/u/304613/CBS.zip

Thanks for any help.

A:Windows updates failing, codes 666 and 80070070

You're getting a Disk Full error - how much space is there on your hard drive?
You need to keep at least 10% free - or 10GB - for Windows to work happily.

Read other 9 answers

Hi All,
I have in the past week been unable to install updates on my computer (HP Pavilion P6000 Series), running Windows 7 64 Bit Home Edition.
I am getting error codes:- 641,   80070641,   13EC. 
I belive that these errors could indicate malware infection or file corruption (Windows Installer). I have run Kaspersky Internet Security (Latest Edition) and also I-Obit Advanced System Care 8. Both these have come up clean, and the problem is still there.
Any advice or solutions would be gratefully received. As it is now 23:11 UK time I am calling it a night, but will check back in tomorrow morning.
Thanks in advance.

A:Error Codes When Windows 7 Updates Fail

Hello there, 
Do you remember making any recent changes to the computer prior to this issue?
In the mean time you can try one of the following solutions to solve the issue: 
Method 1:
Run fix it from the link and check if the issue persists: 
Method 2:
If the above steps fails follow the steps in the link and check if the issue persists
Method 3:
If the above step fails restart computer in clean boot and try installing Windows update. Follow “step 1” in the link to enable to clean boot:
Follow step 7 from the article to “Reset the computer to start as usual”, after performing the clean boot troubleshooting.
You may also follow the steps in the link:
Hope this helps 

Read other 16 answers

I have been unable to get windows updates to work properly for several years now, have failed to find any solution online to fix it thus far, and have wasted many many hours of my life on this

Currently I am getting error codes 80073712 and 643

I have attached a screenshot of the error message and the zip file of the logs

Many thanks in advance for any assistance, I would love for this to finally be resolved


A:Windows updates not working error codes 80073712 and 643

You appear to have some fairly major registry corruption.

I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.

Read other 8 answers

Hi all,

New to the forum here so I hope I don't make a fool of myself.

This issue has been ongoing for about 2 months now, I've just been frustrated with trying to figure out what is causing this, short of formatting the system and starting clean.

From the first screenshot, these are the updates that remain, either stating that they've failed or require a restart.

With regards to the updates with "Failed", the "Error details" read: Code 800F0922.
And with regards to the updates with "Pending restart", the "Error details" read: 80242014.

I have tried various "fixes" from the Microsoft website and also other forums to no avail. The updates still get stuck here.

I tried doing these updates one at a time to see if I could find a troubled update, however there were always mixed results. Once the update that causes this issue happens, it reverts back to the updates shown here.

Windows will go into the "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" loop about 2/3 times before settling down.

Apologies if I didn't provide enough information. Please let me know if there's anything more I can provide to help.

Read other answers

This Exception occurring after latest windows 10 update ( July 14, 2020 ? KB4565633 Cumulative Update for .NET Framework 3.5, 4.8 for Windows 10 , version 1909 and Windows Server, version 1909).
 Before this update it was working properly.  
We Followed all instruction as per given in this below link ,and done all possible changes .but still issue not resolved


Read other answers

i'm connecting a winxp pro desktop to a winxp home laptop. for security reasons, i installed nwlink ipx/spx protocol and unbound client for ms windows & file/printer sharing from tcp/ip. this all worked fine until this afternoon when who knows what happened. now, the ONLY way my laptop and desktop can share files is through tcp/ip.

i tried uninstalling nwlink and then reinstalling it. i tried renaming the workgroup on both machines and rebooting etc. neither worked. as long as tcp/ip is bound, i have no problems sharing files between the two machines. i can access the internet from both machines whether or not tcp/ip is bound or unbound. here is the error i get when i unbind tcp/ip - and have client and file/printer sharing bound only to nwlink - and then try to access one computer from the other:

[my workgroup name] is not acessible. you might not have permission to access this network resource. [then something about talking to my administrator (which is ME)] then "the list of servers is not currently available."

the second i rebind tcp/ip, everything is fine. since i previously had success binding solely to ipx/spx and since i know that tcp/ip doesn't need to be bound in order to share files between 2 computers on a lan, does anyone have a clue why this is happening or what i can do to fix it? thanks in advance.

A:winxp sharing fails when tcp/ip unbound

I can't help you with the nwlink ipx/spx protocol because I don't use it.

However, I also have unbound TCP\IP for security reasons and use NETBEUI protocol for file sharing. This is a fairly chatty protocol but if you have a small network, it will not matter.

WinXP still has NETBEUI but you have to dig for it. Here is a Microsoft article on it: http://support.microsoft.com/default.aspx?kbid=301041

Read other 3 answers

Last night I had to shut down my computer through the power button, as the computer had froze (due to me routinely overloading it, not restarting it for several hours, etc). This is very normal, but when I turned the computer on today, it took an abnormally long time to boot up.

When I entered my user password it spent a full two minutes loading my settings, then sent me to a blank desktop window. There are no errors that appear, I cannot use the little windows key on my keyboard to bring up programs, and the only way I can access anything is through ctrl+alt+delete.

What went wrong? What can I do?

Thanks in advance.

A:WinXP Fails to Load Settings

Boot into safe mode. Click start \ Run and type msconfig. Click the startup tab and see what is running at boot up.

Read other 2 answers

At first, my kids brought it to my attention that their camera's wouldnt download their pics...via WinXP USB...then, upon booting into my linux OS I realized that my usb scanner wasnt being recognized by 10.2.

This machine is dual-boot...WinXP and OpenSuSE 10.2...
I've checked the BIOS settings...see below:
USB BIOS Settings:
AGP Aperture size = 64MB
USB Controller = enabled
USB Legacy Device Support = disabled
DRAM CAS Latency = Auto

...the above settings are all I could find in my BIOS regarding USB on my system.
I have four usb ports on the back of the computer "and" two in front...I find it hard to believe all 6 of them failed at once...I havent lifted the cover to inspect the actual connections but could someone tell me what else might be the problem?

If both OS's fail to find the usb devices and the BIOS is set correctly could it be possible that the motherboard connections to USB have failed?
Thoughts and suggestions appreciated....thanks for your reply.

Read other answers

I just received a new hp pavilion dv6227cl entertainment notebook in the mail. The computer said that it had 98 important updates it needed to install so I tried installing them and only 24 were able to be installed. It said the other 74 updates couldn't be installed because of error codes 8024402C, 80070020, and 80071A90. How can there be error codes already when it's new? I've already run a virus search on the computer and that didn't solve anything.

If anyone could give me any advice I would really appreciate it. Please just let me know if there's any other information you need. This is my first time posting in a pc forum.

A:Brand new hp laptop won't install important updates due to 3 error codes...

Welcome aboard Please download Farbar Service Scanner Download Link and run it on the computer with the issue.Make sure the following options are checked:

Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

Read other 5 answers

NOTE: This is a
cross-post from the SuperUser StackExchange site.  Apparently, because I'm a new user of this forum, I do not have permission yet to post links, so have removed all links I have included in the original post.  I've identified the removed links in
bold, italics, and underlined below.
I've recently started experiencing some issues with a couple of workstations on my network getting the above-mentioned errors
when trying to check for and download updates for Windows 7 (x64). Sometimes I get the 8024402F error, and sometimes I get the 80072EFE error. I've attempted to resolve the problem myself through liberal
use of Google-fu, but I've been unable to find anything yet that will allow these computers to check for updates.
Other workstations including my own do not seem to be experiencing any problems checking for, downloading, or installing updates.
The affected workstations do not appear to have any other network/Internet-related issues, as far as I can tell. The problem only seems to be with checking for Windows updates. All of the workstations on the network have the same basic configuration when it
comes to AV software scanning and security.
For now, I'm just working on one of the (apparently) three computers on my network that are having the problem because it's
a computer that isn't actively in use for production at the moment.
In my research, the most common cause reported for thes... Read more

Read other answers

Hi there,

I hope someone can help me with this. I have 2 of 5 Windows 7 updates are failing, with the following error codes:8007054F

I have also attached the Attachment 342102 file.


A:Windows 7 updates failing, error codes: 8007054F, 9C57

There are a huge number of error present in the CBS logs.
Oddly, the SFC scan appears to have only found 18 components to check - rather than the more normal 12000+ !!
Please attempt another SFC scan, and upload the CBS.log file again.

If the same behaviour is repeated, I think you are looking at least at a repair install

Read other 2 answers

Good Afternoon!

I have a problem I am struggling with. I have had problems with failed Windows Updates for the past 3 months or so. I started a forum on answers.microsoft but this hasn't help - yet (the link is here Windows Updates fail - Error Codes: 80070643 and 8024200D - Microsoft Answers)

Short background - I tried the windows update troubleshooter and it did not work. I tried to perform a clean boot and install the updates, it also did not work. I was able to successfully install a few updates to the .NET Framework by completely un-installing it and then re-installing it (and double checking that it installed properly).

At the moment I have 17 updates that fail to install and they pretty much all deal with microsoft office 2010. The only two not related to microsoft office are:

Update for Windows 7 (KB2545698)
Update for Windows 7 (KB2547666)

I don't know what else to do and would really appreciate any help anyone could give me. I currently have Windows 7 Professional x64. I bought the computer in March of this year and have not made any major changes. The only updates I have are from Windows Updates and the last time they successfully installed (besides the .NET Framework I just fixed) was 21/10/11 and it was a hotfix for windows (KB2482122) problems really started around 19/07/2011 (more than a few updates failed).

Thanks everyone for your help!

- KDog

A:Windows Updates fail - Error Codes: 80070643 and 8024200D

Hello KDog,

Have just read through your post & referred to the "Microsoft Answers" link you gave.
The advice you received there is highly likely what you would get here.

Troubleshooting steps can be lengthy with little return in a situation like this.
We have had update problems here at the Forum where numerous pages of help / advice has been given with no positive outcome.

Please refer to the following 2 tutorials & see what you think.

Repair Install

Clean Install Windows 7

Have you a System Backup prior to your current set of problems?

Have you a windows 7 Disk?

Alternatively you could seek Microsoft Tech's Support.
I believe the email service is free.

Please Verify your Location

Read other 4 answers

Just did a reinstall of my OS. All but 6 updates succeded. Windows 7 SP1
error code: 80070308
error code: 80242016
Tried the windows tool to fix windows updates but didn't work.
edit: typo

A:5 Updates failed to install. Error codes 80070308 & 80242016

Hi greymatters It's normal for certain Windows Updates to fail when you install all of them at the same time. Did you try to install them individually or at least bit by bit and not all of them together?

Read other 11 answers

System: Windows 7 Home Premium, 32-bit.
I've just posted this question in another thread but in less detail and it's becoming a huge problem. I have not been able to install updates automatically or manually for two weeks now. Whenever I use the autopatcher, it claims to create a system restore
point, downloads updates, then fails instantly when it begins the install, and gives the error codes:
800B0100, 80073712, and 8024200D "Windows has encountered an unknown error"
It also tries to autoinstall these updates whenever I turn off the computer, and because they're failing every time, I have to run startup repair every time I turn my computer on.

A:Windows 7 updates error codes 800B0100, 80073712, and 8024200D

Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators
(programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later.

If the problem still happens, try the following steps:
Rename the Windows Update Softwaredistribution folder
1. Close all the open windows.

2. Click "Start", click "All programs", and click "Accessories".

3. Right-click "Command Prompt", and click "Run as administrator".
4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me
know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.
6. In the opened folder, look for the folder named "SoftwareDistribution".
7. Right-click on the folder, select "Rename&... Read more

Read other 12 answers

I am having this issue for months now, and i keep getting these errors. I have searched and tried different methods from other forums but only one worked for me, unfortunately just once ( flushing of the software distribution) but after the next day, when my pc was having its automatic update, it gave me the same errors again, and i could not use the method i used the day before. im not a techie person so please help me with light terms if it's ok.. thanks..

i have Windows 7 Ultimate 64 bit, SP1, AV- Microsoft Security Essential, CCleaners, and SuperAntiSpyware Free Edition

i always get error codes 80070643, 80071a91 and 78f, and because of these all 23 important updates always failed..

A:windows failed updates with Error Codes 80070643, 80071A91 and 78f

Install a few of them at the time and see if you still have issues?

Read other 8 answers


I have a Dell E521 Dimension Desktop PC. It has an internal Sigmatel sound card, and I've installed a Creative X-Fi sound card as well. For 6+ months I've no problems with this config. As of last Friday afternoon (9-Jan.) I started having an error pop up that ways my Audio Device cannot be found. When I restart, everything seems to be fine, I can play music, or a video, or a game and all have sound. But, when I close that app, the next one tells me I have no Audio Device. I can NOT figure out why this is happening. I have tried to uninstall my X-Fi card and go back to the onboard and have the same problems. I have also reinstalled and updated all the drivers for the X-Fi. I have also checked the Windows Update site to see if there might be something there that I haven't already automatically downloaded, and have found nothing new there.

The only recent updates, or installs I have done since Thursday, have been the latest update to Itunes, and an automatic Windows Update.

If anyone has any other ideas of what else I can try, please let me know.


Read other answers

I'm running windows seven home premium (32 bit) and having trouble updating for some time.
Hope someone can help me.
I attach the error codes picture.
I also tried to attach the cbs folder, but even after zipping it, it's still almost 30MB and I can't upload it.
Any suggestions?

A:Unable to install updates - error codes 8e5e03fb, 9e5e03fa, 80070490

remove the older CBSPersist files from the archive until the resulting file is under the 8MB limit - or upload the full set to a fileshare site, and post a link.

Read other 9 answers


Thanks goodness I found this site. I have been struggling since Dec 2013 with failed updates. I have tried all the included fixes and went through all the steps of "Windows Update Posting Instructions" post. I have taken screenshots of my error as well as a shot of when the errors started and what updates were failing at the time. Unfortunately my CBS zip is 1.15GB. So if I can get help on where to host that so you can reference it, that would be great.

I am running Windows 7 Home Premium and it would be amazing if I could get some help on this way too longstanding problem. Thanks!


A:Failed updates (since 12/2013) Error codes 80246007, 80070002, 800736B

How big is the CBS.log file on its own, both unzipped and zipped? - try posting that only, to a fileshare site such as OneDrive, if it's over the 8MB limit.

Please post the CheckSUR.log file from the CBS folder - that should be small enough.

Read other 9 answers

Hi everyone

I've tried many "solutions" that I've found on this forum, but no one seems to have the same exact problems that I see. Or rather, I see multiple errors but once combined the solutions don't work. I'm not a 10/10 in computer savvyness ... close to a 7?

I fresh installed Windows 7 onto a brand new SSD because I previously thought it was the SSD that kept creating errors. BSOD happened multiple times per day, everyday even when doing nothing. I didn't save the error codes from this install but that was all erased. So I went and bought a new and better SSD.

So on the new SSD. Today specifically it has BSOD three times. I've looked in eventviewer, msconfig, memorytest... I'm running in circles. Where should I start?

Thanks in advance.

A:BSOD after updates, gaming, random times multiple error codes

Hello Slayter, welcome to Sevenforums.

What was the initial reason for needing to install? You were receiving errors/BSOD on another OS or you tried to fresh install on the first SSD and started receiving the BSOD?

Troubleshooting Steps for Windows 7

Read other 7 answers

After a repartitioning, WinXP (on an eMachines T6420 running Windows XP MCE 2005) refuses to boot. I keep getting the dreadfully unhelpful error "HAL.DLL file missing or corrupt. Reinstall." (or something to that effect; not in front of the machine to check.)

I have several related problems here:
System only came with System Recovery DVD, not XP CD
Said DVD can either destructively reinstall (via reformat) or non-destructively reinstall.
No option is given to boot to Recovery Console (or whatever it's called) to run FIXBOOT and FIXMBR
Would vastly prefer doing a repair install, to avoid fouling software licenses.

Attempting to not have to reinstall the OS, I've tried things that worked in the past, but this time, XP's not wanting to cooperate. Having had to rewrite the OS four other times (all for this same problem) and knowing the HDD is fine (I'm using the System Recovery partition rather than the DVD; it's faster) I've tried reextracting HAL.DLL three times, copying the thing from the System Recovery partition's minint\system32 directory, and so forth with no result.

Boot drive passes CHKDSK /F /R with no problems. To say I do not want to have to reinstall all my apps (which would take literally days to correctly do) is rather an understatement; also, the kind folks at eMachines inflict crapware out the aha on the user (AOL 9.0, Adobe Reader 6, Office 2007 trialware, McAfee Internet Security (90-day trial) just to name a ve... Read more

A:WinXP fails to boot: reports HAL.DLL corrupted/missing

Read other 16 answers

I'm trying to install ATA 1.6 on a freshly patched Win 2012 R2 box (all patches offered by Windows Update installed). I'm running the installation from an elevated command prompt as Administrator. The setup fails at 99,9% completion before rollback is done.

In the MSIPackage-logfile I find the following ahead of "return value 3":
Calling custom action Microsoft.Tri.Center.Deployment.Package.Actions!Microsoft.Tri.Center.Deployment.Package.Actions.CustomActions.InstallFinalize
InstallFinalize started
FirewallActions AddRule succeeded [name=Microsoft Advanced Threat Analytics Center executableFileName=Microsoft.Tri.Center.exe]
DataCollectorSetActions Uninstall succeeded
DataCollectorSetActions Install succeeded
DatabaseActions Install succeeded
CreateDatabase succeeded
centerCertificate created or retreived
managementCertificate created or retreived
ConfigureCenter succeeded
StartService succeeded [serviceName=ATACenter]
ConfigureManagement succeeded
ChangeIisStatus to Stop succeeded
Exception thrown by custom action:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Tri.Center.Deployment.Package.Actions.WebActions.<>c__DisplayClass1_0.<StopConflictingWebsites>b__1(Binding __)
at System.Linq.Enumerable.Any(IEnumerable`1 source, Func`2 predicate)
at Microsoft.Tri.Center.De... Read more

Read other answers

Hello everyone.

I am an entry level intern IT/IA guy and am in need of help.

A computer in my work place is having issues and is getting the Blue Screen Error.

My boss wrote down the error codes as:

STOP: 0x000000F4 (0x00000003, 0x89A03020, 0x89A03194, 0x805D22DA)


I tried to look up what the last three are, but turned up empty.

If anyone will please help me out, that would be awesome!

Side Note 1:
The Dell support diagnostic tools will not download for some reason. Keeps coming up with an error of "can not access the internet", or something close to that, even though there is internet access and it can access the internet.

Side Note 2: I believe that the Service Pack is 2, it maybe 3.

Side Note 3: The laptop is a Dell Latitude E5400

A:WinXP Blue Screen Error Help (error codes in body)

Maybe this thread will give you some insight on a possible cause: STOP: 0x000000F4 thread...

Read other 4 answers

Hi every one,

i have this machine which is causing too much headache for me,

this machine was having Windows XP 64 Bit,
and it had a lot of BSOD crashes, then i just decided that it's the time to make the move to Windows 7 for this high performance machine, since i was not able to upgrade to Windows 7 because of some applications just working on Windows XP 64 Bit, but now there is a copy of it,

Any way i'm still having those BSOD crashes,
I have replaced the SSD 500GB hard drive with another regular hard drive with no results,
tried to remove and install nVidia Driver,
tried to install a different version of that driver with no results,
tried to remove McAfee AV and installed Kaspersky Internet security 2013 also no result,

now i have grabbed all the data using SF Tool, and i really hope that u can help me with that issue.

thank you

A:BSOD Winxp 64bit, Win7 Pro 64bit many error codes

- you have Bugcheck 116: VIDEO_TDR_ERROR
you may want to read this first STOP 0x116: VIDEO_TDR_ERROR troubleshooting

BugCheck 116, {fffffa800acaf010, fffff8800592c134, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+8e4134 )
You can either try updating your NVIDIA drivers, or roll back to the most stable release (preferably WHQL'd)

- Uninstall your KIS 2013 as it's causing BSOD

BugCheck 3B, {c0000005, fffff88003594fa9, fffff88004409740, 0}

Probably caused by : klif.sys ( klif+95fa9 )

Followup: MachineOwner
klif.sys - Driver Reference Table
you can use the tools here Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase


fffff880`038cba08 fffff880`04546802Unable to load image \SystemRoot\system32\DRIVERS\klim6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
This is part of KIS 2013, and apparently messing with your TCP/IP connections, which is in conjuction to:

fffff880`038cb9d8 fffff880`05b4784fUnable to load image \SystemRoot\system32\DRIVERS\yk62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Modu... Read more

Read other 3 answers

Stable Win XP system now fails to get past initial Windows screen when booting, If you press PF5 when booting can go to safe mode with or without networking but can't access printer from this mode.
If you do go to safe mode and run the SP2 update file (which is already applied to the system) the system will install it and reboot for ONE TIME successfully. All functions seem normal, Upon shutdown and reboot the system starts OK but hangs at the point where there is a Windows screen and a sliding horizontal bar at the bottom but it never turns on the audio or goes any further than this screen, This system has run without problems for years,


A:WinXP fails to get past initial Windows screen when booting

When Windows will only run in Safe Mode it's almost always because you've recently installed a driver (or installed some software that installs a driver, like CD-burning sofftware, third-party firewall or AV) which Windows does not like for whatever reason. The logic of this thinking is that Windows does not load any third-party drivers (except network driver when required) in Safe Mode, which is why a driver problem is the most likely cause.

Think hard about what you've installed recently and remove it.

Read other 1 answers

I have just bought a new ASUS Transformer TX300 notebook on last Friday. I was very irritated about
the poor performance of this i7 CPU notebook. The machine runned very lag and I have
to wait even I just type something. (But at the very beginning when I tested the machine
in the shop every thing was fine) In the Task Manager, there is always the Windows
Module Installer Worker which is always utilizing CPU, Memory and Disk. Windows
update ALWAYS FAIL. Since the day of purchase, virtually none updates were installed. Every time I check
for updates, there are lots of items but when I clicked install updates, it
starts downloading and after half an hour the download progress was still 0%. And
sometimes I could choose to update and restart. However, when I get into the screen
about Windows Updates recently installed updates, all items failed to install. I tried System recovery last night. And the problem is still there. What has improved is that, gladly, the machine runs much faster tonight, commensurating what should an i7 machine performs.
Attached please have some screenshots which were taken to signify the seriousness of the issue and my heart to have this problem fixed asp so that my ssd in the new notebook won't get hurt...

A:Updates always fails


Are you able to install any of the updates individually?


Read other 6 answers

Hi all,

I've been getting WinXP updates installed on my computer everytime I shut it down for about the last 2 months now. I'm wondering if this is legit or do I have some sort of malware? My computer is ok otherwise. I've been also getting these Microsoft software error reporting boxes for the same amt of time too. I don't know if these 2 issues could be connected, somehow. Thoughts?


A:WinXP updates

Do you have Defender? That updates all the time. You could check your update history at the Microsoft Update website.

Read other 4 answers