Over 1 million tech questions and answers.

Lenovo G580 Bletooth not listed in Device Manager after Windows 10 Upgrade

Q: Lenovo G580 Bletooth not listed in Device Manager after Windows 10 Upgrade

Hello All, i am sorry for the question again, but after i Upgraded to Windows 10 my Bluetooth not appeared on Device Manager. i tried everything to repair, but all the solutions on the previous posts didn't work for me. when i press Fn+F5 the window appears and the Bluetooth is switched on but srill nothing on Device Manager and also the drivers are not working, i mean i can install drivers but still nothing appears on Device Manager. in the beggining i had only 1 unknown device, but it was the card reader, i found a driver for it and it worked, but i tried everything with the bluetooth, but nothing worked. btw i tried to start Ubuntu just to see if the Bluetooth is working and yes Ubuntu sees my Bluetooth adapter and it is working on it, but when i run Windows 10 nothing helps with the Bluetooth.My Device is: Lenovo G580 20150Thanks in advance













Solved!

Go to Solution.

RELEVANCY SCORE 200
Preferred Solution: Lenovo G580 Bletooth not listed in Device Manager after Windows 10 Upgrade

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Lenovo G580 Bletooth not listed in Device Manager after Windows 10 Upgrade

Dear nedret,

Welcome in lenovo community,

Based on official list of Lenovo systems supported for Windows 10, the G580 is not listed which means most things may work, but we may not have drivers and support for all features and will be limited in our ability to provide Windows 10 support.

In many cases, the Windows 8/8.1 drivers will work.

Also try to Run windows update, sometimes it helps,

Click Start Menu >> Settings >> Update and Security >> Windows Update >> Check for Updates >> Install Updates.

If it does not help, My advice to you, is to go back to the previous windows (Before windows 10 Upgrade) to have all the functions of the laptop working.

Regards,
Joseph

Read other 3 answers
RELEVANCY SCORE 91.2

Bluetooth Not Listed under Device Manager in my Lenovo G40 and for sure when installing Bluetooth driver for Broadcom it says bluetooth device not detected...

Read other answers
RELEVANCY SCORE 84

Camera is not working after upgrading from windows 8.1 to windows 10. Camera App shows "We can't find your camera" with error code- 0xA00F4244(C00DABE0) "  "imaging devices" category is missing in device manager. I downloaded the driver from this link - lenovo pcsupport.I tried to install the camera driver manually in device manager. After restart , system crashed with "system thread exception" (blue screen). Maybe the driver is corrupted or not compatible. Camera app showing errorMissing Imaging device category  other options i tried,1) troubleshooting hardware and devices category - No issues.2) Checking camera privacy - its "ON". Plz check/address the issue of the driver - link to driver .Help me with the solution. 

Read other answers
RELEVANCY SCORE 80

I just installed a new HD 6670 into my computer, but the computer won't use it. Instead, it's defaulting to the onboard graphics. When I turned the computer on for the first time with the new card, Windows detected the new device and installed drivers. I installed drivers off of the CD that came with it anyway. After restarting, I could no display from the new card. I switched the monitor input to the onboard and checked Device Manager and the only video adapter shown was the onboard graphics. I downloaded the latest drivers from AMD, installed, and restarted. Same thing. I restarted and went into the BIOS and set it to pull graphics from the PCI slot first. Still nothing. I unplugged the VGA from the onboard and restarted with nothing but an HDMI going from the card to the monitor and still no display. The BIOS version is up to date. I don't really understand why Windows would recognize a new device, but then not recognize it at the same time.

A:New card, Windows recoginzed it, but isn't listed in Device Manager

Disable the on-board in BIOS, you don't use both, once you add a PCIe card.

Read other 4 answers
RELEVANCY SCORE 76

I had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it?

(It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
 

A:Solved: Audio device not found; listed in Device Manager

Read other 8 answers
RELEVANCY SCORE 75.2

I have a couple of devices that I want to remove that are listed under msinfo32.exe, but aren't listed under the Device Manager? How would I go about removing these?
 

A:How do you remove a device listed in Msinfo, but not in Device Manager?

Read other 6 answers
RELEVANCY SCORE 73.6

i cant install nvidia drivers " this graphics driver could not find compatible graphic hardware", and i can't see my nvidia card on the device manager, and can't get the hardware ID, it looks like my laptop doesn't have this graphic card installed.
my latop is:
ASUS - K52JC

2 graphics card, intel shared, and separated nvidia ( 310m cuda - 1GB )

i tried to follow this procedure, Fix Latest nVidia Mobility Driver to Fit Your Notebook

but couldn't find device ID, because it is not listed on device manager,
pleaaaaase help !!!!!

A:My Nvidia device is not listed in Device manager

Welcome to Windows Seven Forums.

Have a look here: http://support.asus.com/Download.asp...52Jc&p=3&s=245

Select your operating system from the drop-down list, expand the VGA category and download whichever drivers you want.

I'd be inclined to save them before you install them in case you need them in the future.

Read other 9 answers
RELEVANCY SCORE 73.2

Hey
I recently realized that my graphics card is not showing any where on my computer. I went to the control panel and went to Uninstall Programs and I found the Nvidia driver. Although I can see the driver, I can't see it under hardware, and I no longer see it running on the toolbar. I have a GT310m with optimus (at least I did hahaha). Would be nice to have it back. Thanks

A:GPU is not listed under device manager

  
Quote: Originally Posted by 123sam


Hey
I recently realized that my graphics card is not showing any where on my computer. I went to the control panel and went to Uninstall Programs and I found the Nvidia driver. Although I can see the driver, I can't see it under hardware, and I no longer see it running on the toolbar. I have a GT310m with optimus (at least I did hahaha). Would be nice to have it back. Thanks


Can we get a snip of the device manager GPU tab?
Ken

Read other 9 answers
RELEVANCY SCORE 72.4

Hey guys, I Recently had Windows 7 installed on one of my computers but the computer isn't very good so I downgraded back to windows xp sp2.

My problem is after Windows Xp installs on this computer it doesn't detect my network device. What I mean by this is there is no network tab or anything listed in the device manager.

My ethernet is built into my mboard which is an EVGA nf66.

I've tried installing all sorts of drivers and combinations of the such and nothing seems to work. The internet worked fine prior to installed xp and has had xp before without this problem.

Also, in the device manager there are 3x devices that are listed with yellow exclamation marks beside them that I am unsure what they are.

-PCI device
-other pci bridge device
-sm bus controller

I previously had another computer with this same exact problem that I couldn't fix as well, the only way I could fix it was to install windows 7.

Please help guys I really need this to work.
 

A:No network device listed in manager, HELP!

Have you downloaded and installed the Chipset Driverss?
 

Read other 1 answers
RELEVANCY SCORE 72.4

XP Pro - I had to replace a wireless optical mouse - now using MS Wireless Optical Mouse 2000. It came with a new receiver.

Now the keyboard MS Wireless Keyboard 3000 won't work. It is not listed in Device Manager and the Hardware section of Keyboard in Control Panel does not list it under Hardware though under Wireless it says the battery level is high.

If I use the original Receiver, nothing works.

I tried re-installing MS IntelliType Pro 5.5 for both but only the mouse works.

Any ideas?

Thanks
 

Read other answers
RELEVANCY SCORE 72.4

Hey!
I'm using an dell inspiron laptop with windows vista. Few days back, installed windows Xp professional successfuly. The main purpose I installed xp was to program a microcontroller via the com ports. But to my surprise the com ports were not listed in the device manager in XP! Any help??
 

A:COM Ports not listed in device manager

Are you sure the laptop actually has a COM Port? Finding a laptop with a COM port newer than a Pentium III model is rare, as they have been all but replaced by USB.

Make sure you're not confusing a VGA port for a COM port. Same size and shape but the VGA has 3 rows of contacts (15 total) instead of 2 rows of contacts (9 total) for a COM port.

If the laptop shipped with Vista I'd be surprised if it did. Even many 4-5 year old laptops that shipped with XP don't have a COM port.

If it does have a COM port, check in the BIOS to make sure it's not disabled
 

Read other 3 answers
RELEVANCY SCORE 72.4

Hi,

Ihave a CDRW/DVD combo, it is not detected in device manager, but in my Computer it is shown as Removable Disk, i have tried unplugging and replugging, tried ad new h/w wizard also, I have two OS installed, 98 and XP, it has been working properly for all these years, but now i have the problem, please help me,
 

A:CDRW/DVD not listed in device manager

Hi,

This is a common problem with a simple solution. In Device Manager make sure that DMA is OFF for the CDROM. Also update IDE drivers.
Also try hitting the Windows Key (on keyboard) and Pause key at the same time, or go to control panel and open System. Go to device manager and locate your CD-Rom Drive. D-click it and go to the settings tab. There should be a box where you can check/uncheck Removable. Mine is greyed out so I can't do anything to it. See if your is checked and uncheck it. If not, let us know.

Good luck,

Regards,

Korrupt
 

Read other 4 answers
RELEVANCY SCORE 72.4

PhnxVcd is listed in my Hardware Device Manager listing with a Yellow "!" besides its name. Its properties state "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (Code 19)"

So the question is "Is this "device" of any use, and if so, how can I get it to work?"

Thanks,
Knock

Read other answers
RELEVANCY SCORE 72.4

Installed win7 pro 64. Dont see in built webcam listed in device manager.

A:Webcam not listed in device manager

Hi: It's not listed under Imaging Devices? I think that is where is should go. See if installing this software gets the webcam to work... This package contains the CyberLink YouCam Software for the supported notebook models and operating systems. CyberLink YouCam is a webcam application that enables users to capture images and video from a web camera and apply visual effects to captured images and video. http://ftp.hp.com/pub/softpaq/sp71501-72000/sp71830.exe

Read other 1 answers
RELEVANCY SCORE 72.4

Hello guys, i just bought a lenovo g580, and i am not happy with the fps I am getting. I want to play Counter Strike Global offensive.I want to ask what parts can i change on my laptop so i can get a bit better fps?So my parts are: i7 2620m witch is dual core with 4 threads on 2.7 ghz turbo boostIt also has 1x2gb ram and 1x4gb ram.Video is GForce 630m and 1 tb hard drive.CPU Socket is 988B rPGAI know I can upgrade ram and get an SSD . But can I change the processor and the video card? And also is it worth getting anymore than the 6 gb of RAM.Thank you. 

Read other answers
RELEVANCY SCORE 72.4

Hi, I am using a lenovo G510 laptop with i3-4000M CPU 2.4GHz processor. I wanted to know whether I could upgrade the cpu to an i7-4610M. Will this be supported by my motherboard. I saw some article in google that it will support but wanted to confirm with the experts before I bought the processor. Please help....!! Thanks & Regards Roshan

Read other answers
RELEVANCY SCORE 72.4

my system model is 20157 BIOS version is 62CN97WW current cpu intel pentium B960 .    which cpu I can put into mother board can I choose intel I5 3380M or intel i5 3320M or i5 3230M or i5 2540M

Read other answers
RELEVANCY SCORE 72.4

HiI have Lenovo G580(59337073) with Celeron B820.is it possible to upgrade the CPU to Intel core i3(i5) 3rd generation(Ivy Bridge)? thx 

A:Lenovo G580 CPU upgrade

Hi
 
Welcome to the community.
 
Please find below the supported Processor of your system, you can use any one of them.
 
3rd generation Intel Core i5-3210M 2nd generation Intel Core i3-2370M Intel Celeron B820 (1.60GHz, 2MB) 
 
Regards,
Sameer



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 72.4

I have a G580 with 2 sticks of 4gb (8gb total) currently. I bought these hoping they would work:https://www.amazon.com/Crucial-PC3-14900-Unbuffered-SODIMM-204-Pin/dp/B00JCRZ6XS/ref=sr_1_2?ie=UTF8&... However, when I install them I only get a black screen with the camera light lit up. Is this ram incompatible? I thought this laptop was able to handle 16gb of ram.

A:Lenovo G580 Ram Upgrade

What is the machine type and model of your G580?

Read other 1 answers
RELEVANCY SCORE 72.4

Hello  Just signed up to this forum.... Right I aint computer techy at all really..... but i'm experimental which is probably a horrific combination haha but oh well thats me! I absolutely love my G580 swapped a sony vaio for it..... because it was blue..... haha but anyway its a cracking laptop and i like it.... im running an intel celeron b830 CPU in this..... 6gb ram and 1tb HDD I use this for music production, I have a huge library of music saved to it.... right it runs fast all the time.... i look after my wee blue belle But im convinced she needs a better processor.... because sometimes she lags and freezes when im getting tore into making beats..... Now im looking on ebay at processors..... i havent a clue what to buy? so many choices its actually boggling my brain! im reading that the CPU might run and i might fry by motherboard and all sorts of madness lolSo my question is what CPU should i upgrade too and should i also give her an extra wee bit of RAM to go with her new found processor??? and what kind should i go for?? dual core? quad core? remember im not techy so no confusing replys please a case of fit this.... do that and do this and you'll solve all your problems and not kill her.... thanx look forward to hear what some of you think and especially what some of you have done cheers Youngyboy  also my windows rating is 5.0i wanna push her over 6.0 maybe even 7.0 loland she was windows 8..... Read more

A:Lenovo G580 CPU Upgrade

34 views so far and not one reply.....? Come on lenovo owners a bit of input would be smashing. Or you all having trouble with your keyboards lol

Read other 9 answers
RELEVANCY SCORE 72.4

Hello, I have an Lenovo G580 Celeron Dual core 1,8 Ghz, 2Gb DDR3, the pocessor is B830 I think.My question is what kind of processor should I upgrade from i3 series or i5 series?I have a list with a lot of models with socket G2 but I'm not sure if all are suitable.This is the list: http://www.cpu-upgrade.com/CPUs/Intel/Mobile_Celeron_Dual-Core/B830.html Can anybody help me? Thanks,

Read other answers
RELEVANCY SCORE 71.6

Hello Everyone,

I have a Compaq Presario F553US running Windows 7 Home Premium 32 Bit, I just installed a new copy of the OS so I know this is not virus related. I cannot get my wirless card to be detected in the device manager. I downloaded the drivers and HP Wirless Assistant and still nothing. So I thought maybe the wirless card was bad and replaced it with a new card. But still nothing, I even checked the BIOS to make sure that the wirless was enable and it was.

So now I have no idea was this suddenly stop working, the light on the front (next to the wireless switch) is an orange color instead of blue. Do anyone have any ideas on how to resolve this problem.

Thanks
Jim
 

A:Wirless Card Not lIsted in device manager

I've seen a number of laptops where the built-in wireless device stopped working and had to be replaced with an external USB wireless adapter. It sounds like you have the same problem.

-------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 71.6

I recently replaced a Logitech mouse with a MS Wireless 5000. After initially installing the 5000, I found that in device manager it was listed twice. This didn't seem to be causing any problems and I left it alone but have since had a few BSODs. Wasn't having any problems before the mouse install.

So I went into device manager and uninstalled one of the entries but did not delete the drivers.

On reboot, there are now two entries again but one is "HID compliant mouse" and the other is "Microsoft USB Dual Receiver Wireless Mosue (IntelliPoint)".

Is it normal to have both of these items listed? If not, how do I stop Windows from installing the second driver on every reboot?

A:2 mouse drivers listed in device manager

Both entries refer to the same mouse and should be left alone.

Your new mouse is a "HID compliant mouse" like every modern mouse, so Windows loads it's own driver for that.

But you've also installed the Intellipoint driver which accounts for the second entry in the 'Mice' category of Device Manager.

I also use a MS wireless mouse but I didn't have to install a driver for it. Windows took care of that (Windows 7), so my Device Manager shows only one mouse entry which is "HID compliant device".

Unless your MS mouse has any special functions with extra buttons, it should work perfectly well for standard functions without the Intellipoint software & driver, in which case you too would have only one mouse entry in Device Manager.

Read other 3 answers
RELEVANCY SCORE 71.6

My Aunt and Uncles computer is three to four years old and I know that it is a SIS board because the display adapter is a SIS 5598/6326. I just want to know how without opening the case and checking it, what type of mobo it is. I have WinXP Pro.
 

A:[SOLVED] Device Manager, No motherboard listed

Read other 7 answers
RELEVANCY SCORE 71.6

Hi there
1. I recently purchased an Asus X53-sx1159v laptop (Windows 7 64 bit os - other detals at bottom ).
2. While it has a wifi network connection (which works fine), it doesn't seem to have any listing for ethernet (ie wired) connection. (even though it has the port for wired access.)

3. When i look under computer/device manager/networks, all i get is the wifi atheros 9485 network adaptor. There is no other listing. (see attched file for screen grabs)
4. Am i missing something obvious with all this? The Asus website has examples of this model with screen grab which includes an ethernet adaptor as well (see attached file)

Note that laptop is labelled as an X53 series but in the computer it get listed as a K53e - nice and confusing.
any advice appreciated - DEM

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 3873 Mb
Graphics Card: Intel(R) HD Graphics 3000, 1872 Mb
Hard Drives: C: Total - 286160 MB, Free - 242869 MB; D: Total - 403640 MB, Free - 403504 MB;
Motherboard: ASUSTeK Computer Inc., K53E
Antivirus: Bitdefender Antivirus, Updated and Enabled
 

A:ASUS X53 - no ethernet listed under device manager

Read other 9 answers
RELEVANCY SCORE 71.6

Hi,

While exploring Device Manager today in my Win 8.1 system I discovered I had three entries listed under Sound, Video and Game Controllers:

(1) AMD High Definition Audio Device
(2) CyberLink WebCam Virtual Driver
(3) Realtek High Definition Audio
Every now and then when my wife is playing some of her Facebook games she says the computer will shut down and restart with a message similar to: "Your PC ran into some problems and needs to restart. We will correct them and restart for you." She says that message is preceded by what looks like a 'sad' happy face.

As an added note in Device Manager under Audio inputs and outputs both my Microphone and Speakers are controlled by Realtek High Definition Audio.

That being said do I really need the two Sound Cards (1) and (3)? If not, which one could I disable?

Thanks and regards,
2harts4ever

A:Two sound cards listed in Device Manager

The AMD High Definition Audio Device is for HDMI audio.
The Cyberlink Webcam is for your web cam.

Nothing there that is duplicate or needs disabling.

The problem with the PC ran into some problems has nothing to do with audio. Can't say what that is but its for one of the other forum sections that deals with crashes.

Read other 3 answers
RELEVANCY SCORE 71.6

im useing a old graphics card leadtek myvivo winfast a280 agp 8x 128mb right its not listed in device manager its useing standard vga graphics adapter when i run drivers through leadtek site it says cannot find product but when i start up pc before windows loads it states leadtek graphics card and bios etc im useing windowes 7 ultimate 64bit
cheers

A:my graphics card not listed in device manager

  
Quote: Originally Posted by fred54321


im useing a old graphics card leadtek myvivo winfast a280 agp 8x 128mb right its not listed in device manager its useing standard vga graphics adapter when i run drivers through leadtek site it says cannot find product but when i start up pc before windows loads it states leadtek graphics card and bios etc im useing windowes 7 ultimate 64bit
cheers


You may be able to use a vista driver if you install it in compatibility mode. to do that right click the installer>properties>choose OS
Ken

Read other 8 answers
RELEVANCY SCORE 71.6

i'm using windows 7 64-bit. i've tried uninstalling one of each but they immediately reappear. another odd issue is that if enable the usb keyboard wake option in bios, the computer won't sleep while having 2 of each device listed under device manager. if i disable the wake option in bios, the computer will sleep but i can't wake the computer with the keyboard which i need to do since my power button doesn't work. there was a short period in which i had only 1 of each device listed in the device manager and the sleep and wake processes worked fine. i'm not sure what happened to cause 2 keyboards and 2 mice to appear. any tips?

intel 2 quad 9650
6gb ram
ati 4850 x 2
dfi x48 t2r motherboard

A:2 HID keyboards and mice listed in device manager

Hi,
I have Windows 7 x64 as well and have 3 each HID keyboards and mice. This is normal for me (four different installs on two computers) and is a result of other Human interface devices (HID). One is an IR remote control.

With all above, my sleep works fine.

In the device manager, select view by connection and see which device is attached to these entries.

Read other 7 answers
RELEVANCY SCORE 71.6

im useing a old graphics card leadtek myvivo winfast a280 agp 8x 128mb right its not listed in device manager its useing standard vga graphics adapter when i run drivers through leadtek site it says cannot find product but when i start up pc before windows loads it states leadtek graphics card and bios etc im useing windowes 7 ultimate 64bit
cheers

A:no graphics card listed in device manager

Hello !!

You might wanna post it in Windows 7 Forums there you might find someone who is expert in this area. Also check this website to see if this card works with Windows 7 Windows 7 Compatibility: Software Programs & Hardware Devices: Find Updates, Drivers, & Downloads

Good Luck,
Captain

Read other 2 answers
RELEVANCY SCORE 71.6

I'm am trying to update my firmware for my Sony Optiarc 5500s... basically my Blue Ray dvd rom drive for my Laptop (Asus M70-B1) because a blue ray dvd is not working properly. When Windvd BD starts playing the dvd It says that it could have a 2-3 minute load time based upon the compatabilities of my hardware. It gets through the previews fine but it will not load the main menu of the movie and after a short period of time my Blue Ray dvd rom spins down and ceases to do anything. I let the black screen sit for well over 5-7 minutes and still nothing.

I assume that a firmware upgrade could fix it. I went to

http://www.sony-optiarc.eu/en/support-service/downloads/blu-ray2

and got my firmware upgrade. It is a flashing tool and when I clicked flash it said "updated failed".
They give an update procedure here:
http://www.sony-optiarc.eu/en/support-service/downloads/updateprocedure.html

My problem is that I cannot disable DMA on my DVD rom because I have no channels listed under my "Ide ata/atapi controllers"
I have "Intel(r) ICH9M-E/M SATA AHCI Controller" (which doesn't seem to contain anything useful" and then controllers for my multi card reader.

My DVD Rom drive is on channel 1. It's using the basic windows drivers and it explains this here:
http://www.sony-optiarc.eu/en/suppo...ny-drivers-to-download#FY6okbB-ZbPUErTGoGvQxA

I'm running Vista Home Premium, Motherboard is Intel PM45 Montevina
 

A:No IDE ATA/ATAPI Controllers listed in my Device Manager

Contact Sony about the issue, it is a Sata Optical drive, and XP-Vista has no method to change the UDMA setting on Sata devices.

http://www.sony-optiarc.eu/en/meta_start/contact

The only other suggestion is if there is a way to change it in the bios, unlikely.
 

Read other 3 answers
RELEVANCY SCORE 71.6

Hi there I'm new to the community looking for assistance please. My touch pad stopped working a couple of weeks ago and since then I have been using a USB mouse which although it gets me by it isn't ideal. I've no idea why it has stopped working as I've not  made any changes to the system and upon checking in Device Manager I noticed that Touch Pad isn't being recognised, just my USB mouse Please can anyone come up with a suggestion as to what the problem may  be, I am using the Lenove E31 running Windows 7 Professional Many thanks, any help greatly appreciated

Read other answers
RELEVANCY SCORE 71.6

Wifi is not working in my envy m6. Some times wifi will work and suddenly the wifi symbol disappears. While wifi connected then ralink wireless driver was listed in the network adapter but when it goes of that driver won't be listed and the color of wifi button is always in red

A:Sometimes Wifi drivers is not listed in device manager

Hi: A couple of things you can try... 1. Make sure you have the latest W10 Ralink wireless driver installed.  Install and restart the PC. Package contains the driver installation package for the Mediatek (Ralink) wireless LAN Controller in the supported notebook models running a supported operating system. 5.0.57.0 Rev.A http://ftp.hp.com/pub/softpaq/sp71501-72000/sp71571.exe 2. If the adapter disappears from the device manager, see if running this troubleshooting software helps. This package provides HP Sure Connect (HP Wireless Rescue Tool) for supported models running a supported operating system. HP Sure Connect automatically recovers the driver of a communications device that has stopped functioning. http://ftp.hp.com/pub/softpaq/sp78001-78500/sp78408.exe    

Read other 2 answers
RELEVANCY SCORE 71.6

I am having a slight issue with my new setup, appears to be driver-side. Every time I restart my computer a window pops up stating that a driver could not be installed for "IDE channel." This box appears six times in which I have to close out. There are six of these "IDE channel" devices listed (under IDE ATA/ATAPI controllers) in the Device Manager w/ the little (!) next to them. When I go to install a driver for each of the devices I get "driver is not intended for this platform" or something like that. I don't know what I should do because I'm really not sure what I am looking at exactly. Any help with this would be greatly appreciated.

Also, I've installed all the drivers for my motherboard, graphics cards, and sound card ...all of which work fine. In the Device Manager, I am also seeing two "PCI device" and a single "Unknown" device. The only PCI card I have installed is the Sound Blaster and I installed the drivers for that; it works fine. No idea what the "Unknown" is...

New System Specs

ASUS P5N-E SLi mobo
Intel Core 2 Q6600 (2.4Ghz)
OCZ PC6400 DDR2 SLi RAM (4GB)
XFX 8600GT XXX 256MB (x2)
IDE Western Digital HDDs (x2)
SATA Western Digital HDD (not configured yet)

Windows XP Home Edition SP2
 

A:Unknown Devices Listed in Device Manager

http://www.intrasection.com/pjmorr/2005/06/03/driver-is-not-intended-for-this-platform/
 

Read other 7 answers
RELEVANCY SCORE 71.6

I am trying to install a second monitor on my computer (Gateway GT5428). I have a Nvidea Geforce 8400 GS that is used as the default video card. I installed it years ago and can't remember how to get my video card that is integrated into the motherboard working again.

I have tried to find it in the device manager, but it is not listed. Any suggestions?
 

A:Video Card Not Listed in Device Manager

Read other 9 answers
RELEVANCY SCORE 71.6

I'm really stuck, so I'd appreciate help if someone can give it.

I'm working on someone's computer. I should mention that I am doing this remotely, & I don't have another choice just now.

Due to a whole mess that with his computer, we needed to do a full destructive installation of windows. (XP Pro SP2)

Now, here's the problem. There were no USB devices listed in the device manager in windows after the new installation. There also aren't any unknown devices. There had been one, for audio, but I've fixed that.

The computer is older & the motherboard is a Microstar International MS-6738. I went to their site. i've run their live update multiple times but it just isn't finding anything missing regarding usb controllers and I did the 3 available updates for the motherboard. They didn't seem related, but i tried just in case. No luck, besides of course the audio working.

At this point I'm really at a loss. I feel like throwing the computer out the window, except I can't even reach it to do that! lol

Any ideas? Thanks for spending the time, for anyone who read this.
I did also run belarc advisor. If it would help, ask & i'll post it, as long as that's ok on this board.
 

A:no USB controller listed in Device Manager, no unknown

Have you actually plugged a usb device in???
 

Read other 3 answers
RELEVANCY SCORE 71.6

I have a Celeron B830 on this G580 20150 laptop that I've tried to upgrade to i5-3210M and with no ability to POST to bios. I have the latest version of the bios there (V9.01). I should be able to upgrade to this processor, correct? If so, could anybody point me in the right direction as far as being able to upgrade to the aforementioned processor? Thanks.

Read other answers
RELEVANCY SCORE 71.6

Hi!I'm looking to upgrade my Lenovo G580 with its i3 2370M which really doesn't cut it anymore for work and other stuff. I was thinking the i5 3210m CPU or the i7 3520m. But can my G580 2689 go with an i7 3612QM or isn't there support for it with bios?

A:Lenovo G580 2689 CPU upgrade to which i5/i7 CPU?

Hi Wariodaman,
 
Welcome to the Lenovo Community.
 
As per the query we understood that you are looking for a processor upgrade for your G580 laptop.
 
As you have mentioned that you want to upgrade the processor to i7 3612QM, this model will support the requested process upgrade.
 
Please refer to the link.
 
Hope this helps! Do post us back for further queries.
               
Best regards,    
                    
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 3 answers
RELEVANCY SCORE 71.6

Hello,I have Lenovo G580 running with i7-3520 M 2.9 GHz and also 6 GB RAM. I have a low grapchic card GeForce 610 M. I'm wondering if it's warranty upgading my RAM and GPU so the laptop run better. Should I do it? And if so, what is the better solution for me to buy?Thank you

Read other answers
RELEVANCY SCORE 71.6

Hi. I have Lenovo G580 with i3 2328m. Can I upgrade my cpu to i5 2540m or i53230m? My RAM is Samsung M471B5273DH0-CK0 1.5 V (don't know, if you need this info too)

Read other answers
RELEVANCY SCORE 71.6

Hello,I have Lenovo G580 running with i7-3520 M 2.9 GHz and also 6 GB RAM. I have a low grapchic card GeForce 610 M. I'm wondering if it's warranty upgading my RAM and GPU so the laptop run better. Should I do it? And if so, what is the better solution for me to buy?Thank you

Read other answers
RELEVANCY SCORE 70.8

I have a Dell Inspiron M731R laptop upgraded from Windows 8.1 to Windows 10 Home 64-Bit that suddenly quit connecting to the home network. Was using wireless, so switched to an Ethernet cable, but still no luck. I just discovered that ALL of the network-related devices are now listed under an "Unknown" tab in the Device Manager. A check of properties of each item in that folder says they are all working properly, but that obviously isn't the case. I tried uninstalling each of the 4 items, but when they are recognized again they still show up under the Unknown tab. Any suggestions would be welcome.

Read other answers
RELEVANCY SCORE 70.8

hi;
My laptop config:
Sony vaio (E- series) VPCEB24EN with intel i3 M350 @2.26 GHz processor, 512 MB ATI graphic card, 3Gb RAM.

PROBLEM:
Recently my laptop harddisk got repaired, i had thosiba MK3265GSX HDD with (320GB storage area, 8 MB buffer size & 5400 rpm). I replaced it with seagate ST9750420AS(750 GB, 16MB buffer size & 7200 rpm). Also previously i had only windows 7 Home basic 64-bit so, i purchased home professional with 64-bit.
After installing my new OS i downloaded my drivers s/w, everything got installed except my intel HD graphic driver & it showed the message "minimum system requirement is not met" Also, in my device manager intel graphic not appeared in 'display device'. But, my ATI graphic driver is working properly.
Also, i tried with my older recovery CD which had home basic but when windows tried to install setup my harddisk is not detected since i changed it recently.
i tried every possible solution but couldn't able to find exact reason. plz help me...
for ur info, for sony vaio Bios does not have advanced option so i couldn't view whether graphic card is there or not

A:Intel Graphic card not listed in my Device manager

Where did you get the Intel drivers?

Read other 2 answers
RELEVANCY SCORE 70.8

I think I have Bluetooth ability but I can't seem to find any evidence of this in the Device Manager. Where would it generally be located?

Thank you

A:Where sould my Bluetooth hardware be listed in Device Manager?

BT shows up in the DM only when enabled. There should be a switch to enable it. I have it in my lappy, once enabled, it showed in my DM. Before that, no trace of it.

Also check whether you have installed the drivers. Try re-installing them.

Read other 1 answers
RELEVANCY SCORE 70.8

Hello, I have Lenovo G580 and it is a great laptop! The components inside are Intel i7 3610QM, 16GB RAM. Now I want to replace HD display and fit FullHD display into it. Can I get some more info about displays which should be compatible with my model - Lenovo G580 20150. Maybe FHD screen from Lenovo Y580 to my G580? I see on ebay and these two are exact the same on pictures. Thanks for your help and support! 

Read other answers