Over 1 million tech questions and answers.

Fibocom Firmware Update Tool Doesn't Run

Q: Fibocom Firmware Update Tool Doesn't Run

Hi All, I'm trying to update the firmware on the Fibocom WWAN device on my X270 laptop. I'm running windows 10 x64. I downloaded the Firemware update from here: https://download.lenovo.com/pccbbs/mobiles/nz2wi01w.exeThe Readme is Here:https://download.lenovo.com/pccbbs/mobiles/nz2wi01w.txt When I try to run the unpacked executable, L831_FWUpdateTool_L831_V2E.0C.00.16_NAND, nothing happens. Don't even get a window that then prompty dissapears, just nothing happens. I've tryed starting it from a commandline and using /? type switches to see if I can get anything else from it but nothing happens. Also checked to see that it's not blocked, or being stopped by AV, also checked event logs, there's nothing there.... Any ideas? Is it me, or is the EXE at fault? I've checked the manufacturer site directly, but they don't offer firmware downloads (As I'd exepect really) My laptop is currently running v7 so this would be jumping to v16, as at the moment I only get a "Limited Service" with my sim card. I've checked the Sim in a MiFi device and on a phone and it works fine. So I'm hoping a firmware update will help. Any suggestions greatly appreciated.

RELEVANCY SCORE 200
Preferred Solution: Fibocom Firmware Update Tool Doesn't Run

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Fibocom Firmware Update Tool Doesn't Run

Welcome to the CommunityTry to perform the fw update from either Lenovo System Update or Lenovo Vantage applications.

Read other 1 answers
RELEVANCY SCORE 70

I am attempting to update the firmware for my SSD according to the tool in System Update and Companion.  It apparently detects and want's to update my SSD (Samsung MZVKV512HAJH) from 6L0QBXX7 to 7L0QBXX7.  However when I do so it simply pops up a box which says "Firmware update FAILED! RC=0x5 Stopped by a soft error. Please try again". I want to see a log or figure out what RC=0x5 means, or even what a soft error is.  Where can I go to learn this? Thank you!

A:SSD Firmware Update Tool Fails

Good day.
 
Which laptop do you have? Windows version? Any recent major OS updates?
 
Regards.

Read other 1 answers
RELEVANCY SCORE 67.6

Hi I work in a school enviroment, and we have LOTS and LOTS of the Lenovo Yoga 11e (20da) and newer... Earlier I was able to update the battery firmware on the machines using Lenovos Battery Firmware updater, but now I get error on all machiens.. The error is always the same: "The tool was unable to update the battery firmware due to an internal error" no error codes or nothing. I use this tool.https://support.lenovo.com/dk/da/downloads/ds001322Anyone know a solution to this? All yogas are installed with Windows 10 Education.

A:The tool was unable to update the battery firmware due to an internal error

Hello MadsWilliam, welcome to the Community,
 
Exactly which systems are you seeing this on please, the 20DA and which other types please? Could you also check the manufacture dates on a couple of examples in case they may be newer than the firmware updater and therefore not recognized by it and also, it would be helpful, if you could let us know the BIOS version from an example of each MT which is presenting you with the error please?
 
Thanks

Read other 1 answers
RELEVANCY SCORE 67.6

Hi I work in a school enviroment, and we have LOTS and LOTS of the Lenovo Yoga 11e (20da) and newer... Earlier I was able to update the battery firmware on the machines using Lenovos Battery Firmware updater, but now I get error on all machiens.. The error is always the same: "The tool was unable to update the battery firmware due to an internal error" no error codes or nothing. I use this tool.https://support.lenovo.com/dk/da/downloads/ds001322Anyone know a solution to this? All yogas are installed with Windows 10 Education.

Read other answers
RELEVANCY SCORE 64.4

I can see support for the MZVLB512 and MZVLB1T0, but nothing for the 256Gb model. Why?https://download.lenovo.com/pccbbs/mobiles/fwnv25en.txt

Read other answers
RELEVANCY SCORE 60.4

My Windows Update is failing. For whatever reason, my Vaio cannot install Windows 7 SP1. The update fails and it returns variations of unknown error or errors whose numbers are nowhere to be found when I search. (I've tried it 7 times, got 5 5 error numbers and 2 unknown errors.)

Right now, I'm following the troubleshooting steps at microsoft.com. It had me run the Windows Update troubleshooter, which claimed to make changes so the update would install. It didn't install.

The next step is to download and install the System Update Readiness Tool. http://windows.microsoft.com/en-US/w...Readiness-Tool

The site claims that it could take "several minutes" and to not close the installer "even if the progress bar appears to stop, don't cancel the installation." Fine, I haven't. But the progress bar hasn't moved. As in, there's no green in the bar at all. It has been running for over two hours. I know I got the right file; I checked my Windows 7 Version before I downloaded.

It's just hanging at "Installing Hotfix for Windows (KB947821) (update 1 of 1)... "

How long do I wait? Have any of you encountered this? What do I do next? And thank you, thank you, thank you for even reading this. I'm technically adept enough to follow directions - but that's where my computer expertise ends. When I searched the forums (maybe I didn't search well enough?) I didn't find this problem, but others mentioning similar issues with the SP1 update ... Read more

A:Windows Update Readiness Tool doesn't run.

I download myself and I waited and had the exact same thing that the bar was not showing green for awhile, but it finally stated that it was installed.

I too am having trouble installing Windows 7 SP1 on both my laptops. I will try installing it tomorrow will let you know

Read other 5 answers
RELEVANCY SCORE 58

Hi allMy WWAN was working previously. I have updated my Windows to 1809 October update.However now my WWAN toggle is missing in windows 10 I can see in device manager -Network\ Fibocom L850-GL is missing (shows up in hidden devices) - as error 45 - not connectedSystem\ Intel XMM7360-P is listed as working I've sinced downgraded - but still can't find the toggle.Anyone have problems after updating windows?  Or anyone NOT have problem after updating?  Thank you 

Read other answers
RELEVANCY SCORE 58

I was updating my drivers for my new Lenovo Yoga 920 laptop and I tried to use this driver: https://pcsupport.lenovo.com/no/en/products/LAPTOPS-AND-NETBOOKS/YOGA-SERIES/YOGA-920-13IKB-GLASS/do... However, the update keeps failing and the Type C ports do not work now. I can't charge my laptop. Luckely I am at 75%, so I have about 3-4 hours to fix this before I'm forced to take it to service. I tried this solution: https://www.gfisk.com/lenovo-yoga-pd-firmware-update-failure-ccg4-two-port-usb-c-controller/but it doesn't work for me. I'm getting desperate I'm supposed to press the power button for 8 seconds and the powering should be back on, but for me the lap top goes off after 3 seconds of holding the power button. I keep pressing the button of course to see what happens. But, when I turn back on, the battery still won't charge. And the firmware update keeps failing. I tried everything according to instructions, but with no avail. Please help! My laptop is off now, so I will wait for solutions here before I turn it back on.

Read other answers
RELEVANCY SCORE 53.6

Hello, I keep getting this warning. I see that this is the latest firmware.Why do I keep getting this info and how do I remove it? 

A:Thunderbolt firmware detect tool

Just wondering.  Are you running Vantage to check for updates?  I get that whenever I check for updates.  IF I dont check for updates it doesnt come up.  The other way it doesnt come up is if i disable Thunderbolt in BIOS.  BUT if I disable it in BIOS I get a fault error when I run Vantage to check for updates.  A Lenovo Employee says that it shouldnt generate an error and they are trouble shooting that.
 
https://forums.lenovo.com/t5/Pre-Installed-Lenovo-Software/constant-faulting-of-FwUpdateCmd/m-p/4189...

Read other 1 answers
RELEVANCY SCORE 51.2

In README, new firmware version is "W887904". But my SSD current firmware is "3887904"."W887904" and "3887904" are not same. But is it correct that "No new firmware found."? Or Levono utility program can't find firmware file? "No new firmware found." is too hard to understand. I think better, "No need to update firmware...".... Levono utility program can't find firmware file? "Solid State Drive Firmware Update Utility for Windows 10 (64-bit), 8.1 (64-bit), 8 (64-bit), 7 (32-bit, 64-bit) - ThinkPad FWSD48 19 Oct 2018" is not easy to use. 

A:X1 Carbon SSD Current Firmware 3887904, New Firmware is "None", "No new firmware found." is normal?

Welcome to the CommunityWhat's the laptop MTM code?What's the SSD p/n as well its FRU code on the drive sticker?Could you provide the SSD sticker photo?

Read other 1 answers
RELEVANCY SCORE 50.4

This trick might be useful try it

Manually Update AVP Tool Kaspersky Virus Removal Tool Signature Databases ? Raymond.CC
 

Read other answers
RELEVANCY SCORE 50

Howdy,I've got a t460p thinkpad, running win10.  It has the dock, and 2 monitors are usually attached to the dock.My lenovo system update wanted me to install the critical security [urgent] update to my intel management engine, the update is to version 11.8.55.3510.  I followed all the instructions, closing nearly everything and the update proceeded normally and quickly, until it froze. The system updater says "installing: Intel Management Engine 11.8 Firmware - 7 [32/64]/8.1/10 [64]"  and"Overall Progress:  91%"The cmd window that's showing the actual install says "FW Update:  [ 99% (-)] Do Not Interrupt"  but the little progress spinning thing has not spun in a long time. (40+ minutes)Every so often (every 5mins?), it the upper progress bar in the "system update" will backup a little bit...then it will move forward again a minute or so later. Umm...I need to use my computer.  It's been about 45 minutes that I've been looking at this screen with no change (other than the backup-forward cha-cha in the gui progress bar).(image to help) (the progress bar is in it's full position, this is what it looks like after the top progress bar moves forward again after backing up a wee bit, when it backs up, it just doubles that gray area at the end, it doesn't move back a whole lot).I am guessing I cannot restart at this point. Can I abort the install and try again? 

Read other answers
RELEVANCY SCORE 50

 Hi there,  I would really appreciate help in relation to this ongoing error. I am prompted by Vantage on regular basis to update the SSD firmware from 6L7Q to 7L7Q. Using Lenovo Storage firmware update tool 1.103. Fails every time, has been like this for months so I am not expecting an auto update fix.  Tries to do it, gets to reboot, and then the error below appears.  "software condition is not ready to update due to some condition" I have also downloaded from Lenovo website manually, and have run the zipped version, with same result. I have looked up Samsung SSD drivers directly and there is no options for this drive. Has anyone had similar issue? Please let me know if you have a fix.  Many thanks.  

Read other answers
RELEVANCY SCORE 50

Hello, I have Carbon X1 5th (20HR) running Windows 10 pro (updated).  Altought I followed the instructions here - https://pcsupport.lenovo.com/cy/en/downloads/ds120390 (This is the page for Lenovo users who wish to update TPM firmware) - and installed the "BIOS Update Utility for Windows 10" version 1.33, Windows still keeps telling me to update the TPM firmware driver.  In BIOS it shows that I have TPM ver 2.0, enabled. Since Windows kept telling me to update the TPM driver, thanks to Google I found out that there is a tool created by Lenovo called "TPM Firmware Update Utility -ThinkPad" (It is worth noting that this tool is not mentioned on the instruction page). I downloaded the tool, but can't understnad how to use it (assuming that I should use it at all, because this tool is not mentioned on the TPM instructions page). Could you please help me to solve the TPM issue described above? Is there a way to check what version do I have? Thanks in advance!  

Read other answers
RELEVANCY SCORE 49.6

Can a Firmware Update and/or drivers on printers be reversed?I am new to BleepingComputer, so I do not know which Forum to post this to, as this issue involves multiple forums: Hardware (HP Printers), Software (Firmware & Drivers), Operating Systems running Windows 2000 and Windows XP.At my workplace, we have many HP Printers on the network. HP sent me a link promoting HP Easy Printer Care. I figured I would try it (big mistake) because I take care of all of the printers in our building. So this Easy Printer Care tells me that there is updated Firmware for my printers. So I get the firmware and install it. Of course, HP didn?t really explain how to install it. I had to look it up to actually do the install. After installing it, HP tells me that the Firmware Updates still need to be updated!?!Now the end users are having problems when they print. Multiple users are having the same and or different problems. The problem that has the most reports to me are: When someone is printing a document and they want to change it from portrait to landscape, they click on properties and receive an error message that reads:Function address 0x2e2a5aa caused a protection fault. (exception code 0xc0000005) Some or all property page(s) may not be displayed. Click OK.Then another windows pops up saying: Operation could not be completed. Click OK.The function address is always different (for different users or systems) The exception code is always the same. The User c... Read more

A:Can A Printer Firmware Update And/or Driver Update Be Reversed?

You can go to Device Manager and find the printer and in properties it gives you the option to "roll back" the driver to a previous version. A firmware update and driver update mean 2 different things, to me anyways. My understanding is a firmware update offers "improved" instructions to the onboard chip of the device. What does HP say about the problem?
Mark
'

Read other 3 answers
RELEVANCY SCORE 49.6

Hi there, my Helix laptop (purchased a few years ago) is giving me the "Keyboard Dock Fan Error" at startup. I am then unable to use the keyboard and mouse pad. I previously had this same error a couple of years ago and had solved it using the Firmware update.Now I tried:- BIOS update. Done updated to the latest BIOS version.- Tried doing again the firmware update (although I had done it a couple of years ago) but now I have Windows 10 and the firmware update executable on the Lenovo site says it is for Windows 8 or below. I tried it anyway but it gave an error saying: "This tool and EC firmware mismatch, or communication error is happened.".  Your help is much appreciated.- Najib

Read other answers
RELEVANCY SCORE 48.8

Hi,
If a computer doesn't start up properly or is showing no video (for example: doesn't start up from a bootable USB drive nor CD etc) and I've exhausted all the troubleshooting procedure. I always think, PERHAPS MISTAKENLY "what if the firmware is corrupted? shouldn't I reinstall/update it?.

Please answer to what I asked, sometimes you guys answer unrelated stuff. Thank you
 

Read other answers
RELEVANCY SCORE 46.8

HP-Update FIRMWARE update problem?
I got some critical update for my Seagate 320 gb hard drive?s firmware. I went to download an process the update, later it asked me to insert a blank disk. Well I don?t have a blank disk but I hit bootable cd anyway thinking it would create some file on the hard drive. Well obviously that?s not what it had in mind because my disk drive opened, I shut the disk drive and it started saying writing data to disk. HOW could it do that with no disk. I couldn?t close it. It then said installation succesfull. What the heck. I restarted my computer to see if I had screwed up my system and it seams to be running fine. Have I screwed up my hard drive? Did the dang update install? Can I delete these firmware updte files lying around on my desktop? Please help me????

A:HP UPDATE FIRMWARE update problem?

Originally Posted by GreatNate


HP-Update FIRMWARE update problem?
I got some critical update for my Seagate 320 gb hard drive’s firmware. I went to download an process the update, later it asked me to insert a blank disk. Well I don’t have a blank disk but I hit bootable cd anyway thinking it would create some file on the hard drive. Well obviously that’s not what it had in mind because my disk drive opened, I shut the disk drive and it started saying writing data to disk. HOW could it do that with no disk. I couldn’t close it. It then said installation succesfull. What the heck. I restarted my computer to see if I had screwed up my system and it seams to be running fine. Have I screwed up my hard drive? Did the dang update install? Can I delete these firmware updte files lying around on my desktop? Please help me????



It is ok.

I dont know what happened, but You HAVE to burn the bootable disk, and then boot into it after a restart in order to update the firmware.

Read other 22 answers
RELEVANCY SCORE 46.8

When I install seagate hd firmware update it shows this error message how can I install this update????

A:how to update seagate hd firmware update

The error message did not come through; all is there is a grey triangle.  Post the message as text.

Read other 3 answers
RELEVANCY SCORE 46.8

O.K. when originally wanting to do an Upgrade to Windows 8 i used VM to check it out.When i decided after alot of research to do the upgrade i used Windows 8 upgrade assistant.The message i receved on compatibilty was only one problem.Your PC Firmware doesn't support secure boot so you won't be able to use it in Windows 8.Secure boot requires firmware that supports UEFI v2.3.1 Errata B and has the Microsoft Windows Certification Authority in the UEFI signature database.Sure anyone who has UEFI like me received this message using this upgrade assistant.Through many hour and days of research on internet and other forums nobody seems to know how i can update my firmware,neither ASUS could advise me or Microsoft.To me i figured it should be a BIOS update,but no new ones are available for my system.So since i had no answers i decided just to do an install of Windows 8 Pro 64 bit (clean install) works well,faster then Windows 7.So far i like it.Only clue i have at this point was a site i found.Knowing my BIOS is a American Megatrend http://www.ami.com/Products/BIOSandEFIFirmware/AptioV/  Not sure if this is an answer to be able to do a UEFI install of Windows 8 Pro again to get full use of secure boot,GPT Partitions,but this is closest clue i got.BIOS stuff and flashing it can always be risky,rendering the motherboard inoperable,causing major issues,that i do not want to do.If anyone knows anything on this and can help with it would be very much appreciated i am stumped on thi... Read more

Read other answers
RELEVANCY SCORE 46.8

I have an Olympus Evolt-500 that won't update the firmware. I'm running XP pro with a DSL internet connection. I've talked to every tech support person Olympus has and they don't have a clue what's wrong.

It will recognize the camera and lenses but it will download from 50% to 83% of the firmware update, then a message pops up and says no connection to server and everything shuts off. They had me try the download with no firewall on and using just the modem no router. I've used Olympus Viewer, Olympus Master and Olympus Studio Trial version and they all download about the same amount before they shut down.

I'm open to suggestions at this point.
 

A:Can't update firmware

Read other 14 answers
RELEVANCY SCORE 46.8

Okay I want to update my DVD-rom Driver due to it having a difficulty playing LOTR-FOTR Special Edition.
Here's a link to LG's site http://ca.lgservice.com/index_b2c.jsp Link doesn't work.Got to www.lgservice.com than to Canada,than to device driver,dvd-rom,scroll down to LOTR-FOTR Special edition.Will tell you there.
Now I know that I have to download the files from www.bootdisk.com for Dos. 6.0.After I do this do I double click on the files,from Bootdisk.com and send them to a floppy disk?Than after that the 2 files from LG's site I put on this Bootable Disk?
Restart the computer type in the command and let it go?
If I do this wrong is there anyway of screwing up my Bios,I have a Dell computer and don't want to screw anything.
The Lg Dvd-rom I bought seperatly and installed myself.
Someone help me on this or was the above correct??
 

A:Firmware update....

Read other 6 answers
RELEVANCY SCORE 46.8

I had a new Latitude E7480 laptop hang during a TPM firmware update today. I have updated several other laptops with the same USB drive created for the process. The update hung at the point where there was text on the screen that the TPM update was in progress and to not power off the computer. The progress meter never advanced past zero percent. I could not warm boot the laptop nor power off the laptop by holding the power button down. After several hours the laptop is still hung at that point. Any suggestions?

Read other answers
RELEVANCY SCORE 46.8

Hey guys I have a Samsung SH-S222L. Should I upgrade the firmware to SB02?
 

A:Should I update the firmware?

Are you having a problem the firmware upgrade corrects? If not, leave it alone.
 

Read other 2 answers
RELEVANCY SCORE 46.8

Dear Users,
Netgear WGR614 v7
Please advise on why I can't update the firmware. Every time I get the message that the upgrade has failed.

Arturo
 

A:Firmware update

Read other 13 answers
RELEVANCY SCORE 46.8

I periodically check the website for my router to see if there are any new firmware updates. I checked it today and every time i try it says :
A New Version is Found. Do You Want to Upgrade to the New Version Now?

Firmware Version:
Current VersionV1.2.0.8 New VersionV1.2.3.7

I click Yes.
It then tells me that the update failed.
Any suggestions?

I am running an XP machine.
I have Verizon DSL.
I have a Westell model 2200 modem and a netgear wnr2000 router.

Any other information you need i will try my best to provide. Just ask.
Thanks
 

A:Can't Update Firmware

Read other 9 answers
RELEVANCY SCORE 46.8

I have Aspire E 14. Last night, I saw I have 1 critical update for firmware v1.17. When I clicked the update button it just says "updating" It just goes on and is not stopping. I closed the portal and a window appears saying reflashing. I saw it did reflash up to 100%, but why won't the critical update notification disappear on Acer Care Center portal? I also checked update history and the firmware is not yet included. I tried it again the next morning, clicked the update button, but still, it just says updating and can go on until you close the portal.  Any solution? Did my Aspire really did reflash? It seemed nothing has changed. Thanks in advance!

Read other answers
RELEVANCY SCORE 46.8

I have installed Open Wrt Bin file on my WR703N Mini portable wifi device. After that it doesn't broadcast WiFi Signals. But Through the LAN cable and using ftp i can connect the Flash memory. Please anyone can help me to Update to my Old Firmware version using FTP. I have my old firmware version's bin file. Pls help to me.
 

Read other answers
RELEVANCY SCORE 46.8

I have Aspire E 14. Last night, I saw I have 1 critical update for firmware v1.17. When I clicked the update button it just says "updating" It just goes on and is not stopping. I closed the portal and a window appears saying reflashing. I saw it did reflash up to 100%, but why won't the critical update notification disappear on Acer Care Center portal? I also checked update history and the firmware is not yet included. I tried it again the next morning, clicked the update button, but still, it just says updating and can go on until you close the portal.  Any solution? Did my Aspire really did reflash? It seemed nothing has changed. Thanks in advance!

Read other answers
RELEVANCY SCORE 46.8

Hi,

I have a Gigabyte CD-RW. model GO-R5232B. I downloaded a zipped Firmware of the same model from the Gigabyte website. Is it safe to update my hardware with this firmware even it has not encountered any problems for the past two years?

Tony
 

A:When to update Firmware?

Read other 9 answers
RELEVANCY SCORE 46.8

Could someone please tell me the manufacturing web site for MATSHITA CD-ROM CR-586 and OPTORITE CD-RW CW4802 so that I could do a firmware update??????????????????????????????????????????
 

A:Firmware Update

Read other 16 answers
RELEVANCY SCORE 46.8

My laptop went off  and when i started it ask forr firmware update  and i updated it
Now after 4-5 days same problem happened
To start laptop we have to first remove and plug the battery then it gets start
Please help

A:Firmware update

Please list Dell model number and version of windows: Ex: Dell Inspiron 3543, windows 10
If you don't know it, type msinfo32 onto the search box, and look for system model....
By the way, do you remember the firmware update? If yes, please post....

Read other 3 answers
RELEVANCY SCORE 46.8

Im not sure how to update my firmware. Im having trouble burning CD-Rs with nero 7.0 because it keeps coming up with this calibration error. I posted that thread in this same forum ( http://forums.techguy.org/multimedia/453562-nero-issues-data-disks.html)
but it just leads to this new question about updating my firmware because it might be a possibility. Im also running SP1.

I went to this page called "the firmware page" link- (http://forum.rpc1.org/dl_all.php) and searched for my Disk Drive but had no luck in finding it. Even if I were to find it, how would I go about updating it, and how can I tell if its up to date?

Im running win XP and it is a Toshiba Qosimo laptop e15-av101
I looked in my computer/cd drive/ properties to see the name of my drive and hopfully I have the right one, it is a

MATSHITA dvd-ram UJ-830s.
 

A:How do I update my firmware?

Read other 16 answers
RELEVANCY SCORE 46.8

Trying to update firmware on blu-ray but frm file will not write in Vista says I need supported writing software. What exactly do I need to do this?

Read other answers
RELEVANCY SCORE 46.8

ok ive checked a bunch of sites and i wanna get my routers firmware to 3.43 so that it'll be primed for halo 3 tommorow. the problem is when i try to download i end up with a 505 error message saying: failed to change directory

Can anyone help?
 

A:DI-614+ firmware update

Read other 7 answers
RELEVANCY SCORE 46.8

Laptop is a Dell Vostro 1000 with XP Home SP3. Just installed a Crucial SSD. Works great. Tried to install a firmware update; not so great. Following the instructions from the Crucial site, I downloaded the update (it's an ISO file) and burned it to a CD. In the BIOS, changed boot order to CD drive first. Restarted the laptop. No joy - Windows still boots to the desktop. What could be wrong? I know almost nothing about using ISO files. TIA.
 

A:SSD Firmware Update

CD-image ISO files have to be written to CD in a special way, if you just copied the ISO file to a CD like a normal file, that won't work. There's a free app for creating a CD from an ISO file, it's called IMGBurn: http://www.filehippo.com/download_imgburn/
 

Read other 2 answers
RELEVANCY SCORE 46.8

For those with any of the following, OCZ has issued a series of firmware updates for the OCZ Vertex 3, Vertex 3 Max IOPS, Agility 3, Solid 3 and RevoDrive 3 bringing the firmware towards version 2.22,

OCZ Technology

For those with Windows installed on it the USB stick method works very well (and easy to set up),

NEW! - Bootable tools for OCZ SSD's

List of resolved issues (as well as a direct download link) can be found here),

OCZ Vertex 3, Vertex 3 Max IOPS, Agility 3, Solid 3, RevoDrive 3 2.22

A:OCZ SSD Firmware update for...

Thanks! My Agility 3 will appreciate this.

Read other 1 answers
RELEVANCY SCORE 46.8

I don't know much about firmware updates as I never had to do it but my DRW-2014L1Tburners are giving me some coasters in vista x64. Not 1 coaster under Nero 6 in xp pro.

I got the driver update listing in the sticky, went to the asus site to check on a firmware update for my burner's for x64 vista and there are 3 hopefully that will eliminate the coasters.

My question is: If I get the updates for the 64-bit vista will that interfere with those drives when I use xp pro ?

thanks,
kevin

PS: I use swappable drives; switching between vista x64 and xp pro.
only keeping xp for gaming and Nero 6

A:cd/dvd firmware update ?

Originally Posted by kem


I don't know much about firmware updates as I never had to do it but my DRW-2014L1Tburners are giving me some coasters in vista x64. Not 1 coaster under Nero 6 in xp pro.

I got the driver update listing in the sticky, went to the asus site to check on a firmware update for my burner's for x64 vista and there are 3 hopefully that will eliminate the coasters.

My question is: If I get the updates for the 64-bit vista will that interfere with those drives when I use xp pro ?

thanks,
kevin

PS: I use swappable drives; switching between vista x64 and xp pro.
only keeping xp for gaming and Nero 6



no the firmware should be backwards compatible

Read other 5 answers
RELEVANCY SCORE 46.8

hi everyone. I would like to know if i should update the firmware on my ssd. It is not brand new, maybe 3 yrs old. ocz technology. I have neve done this. So i need to know how to figure out exactyly what i have and if i even need to.

any help would be much appreciated

A:update firmware

I don't see any harm in updating firmware. But please identify the firmware that you would like to update and what exactly are your doubts about doing it.

Read other 9 answers
RELEVANCY SCORE 46.8

Hello, I have recently purchased an "Onyx Portable Media Player" by "Mach Speed Technologies". I installed the included drivers and software and am currently upgrading the firmware. The update window says "SigmaTel MSCN Firmware", so I'm assuming it's licensed by SigmaTel. It's updating from version 000.000.000 to 880.282.433. The window's progress bar seems to be stuck at "Initializing", with no advances made in the main progress bar but the smaller one constantly filling and then refilling. Is this just going to take a long time or is there something wrong?

I can provide a screenshot if needed.
 

A:Firmware update

Is this the media player firmware or motherboard?
Why did you feel the need to upgrade the firmware?
 

Read other 3 answers
RELEVANCY SCORE 46.4

i have been trying to update the driver/firmware for my pioneer dvd writer, and im having a problem running the software. the drive is the Pioneer DVD-RW DVR-108 and im trying to install the firmware version 1.20 i think its called(filename: DVR108_FW120B.EXE). i follow the vague instructions from pioneeraus.com.au and run the .exe file. and it comes up with a command promp window and i get a dialogue box pop up in front of that titled "UPGDVD" and it says "available target is not found".

i also tried to update the driver through device manager but there is no .inf file that i can find on the net so im pretty sure thats a no go.

if anyone knows a way around this problem or if there is another way to update my driver i would be very greatful if you could help.

im running xp with a P4 3gig CPU with 1gig ram and a 80gig HDD.
cheers
 

A:DVD R/RW Drive Firmware update help

First of all a firmaware update is not a "driver". all optical drives use the windows native drivers and only MS updates that. I have never seen a firmware update as you describe open a command prompt window. if Pioneer actually uses this method then you will probably have to set the command prompt to the location of your drive. ie; type the locaion ( drive letter of the drive you are updating) if your pioneer is the D drive then you would type D:\ and then press enter
 

Read other 1 answers
RELEVANCY SCORE 46.4

Hi, I have a X1 Yoga 1st generation with an intel SSD. When I try to run the SSD firmware update utility (fwwinsd.exe), I keep getting a failed update with error 0x35. I already disabled bitlocker but keep getting the same error. Any suggestion? Thanks! I'm including the error log...

Read other answers
RELEVANCY SCORE 46.4

I note a new P51 (models 20HH, 20HJ) Thunderbolt Firmware update has just been posted on the support drivers page (24 Jul 2018) which is great news, but it's release note refers to Thunderbolt driver / software version 17.3.74.400. The Thunderbolt driver software currently available on the P51 20HH, 20HJ support drivers page is version 17.1.64.250, which is quite old. Please would you also put the latest Thunderbolt Software on this support drivers page. BTW: The P51 (models 20MM, 20MN) support drivers page does has the latest Thunderbolt Software (17.3.74.400), so I assume this could be installed on a P51 (models 20HH, 20HJ), as all models use the same Thunderbolt controller - ID 15D9 (Intel JHL6340).

Read other answers
RELEVANCY SCORE 46.4

Hi, I have a problem with OneLink+, where DP is not working. I believe a firmware update should fix this. The update.log which is returned from tp_onelinkplus_dock_fw.exe is: Version: 0.00.000Update result: 255Error description: Can't connect to Synaptics VMMxxxx DP hub IC The paradox is that I am trying to update the firmware to fix the DP and firmware won't update unless you have a DP already connected.  In my quest to fix this, I have downloaded many files some of those where for an incorrect model, pressumably the other OneLink. I am now wondering if I have overwritten the firmware of OneLink+ with that of OneLink. Is that possbile?  Is there any other way to fix this?

Read other answers
RELEVANCY SCORE 46.4

Hi, i cant' update the firmware of my toshiba 256gb ssd. i use the latest bios 1.24 and ssd firmware update utility FWNV16. i get the following errors:

A:Can't update ssd firmware on my x1 Carbon 5.gen

i'm wondering why the firmware updater uses the win7_lpmoff file instead of the win10_lpmoff file. I have installed win10 (16299.19) on the machine.

Read other 1 answers