Over 1 million tech questions and answers.

X230t F1 fuse value?

Q: X230t F1 fuse value?

Brief history: Vertical artifacts on LCD. Checked if cables are seated behind LCD but forgot battery in. Backlight no longer worked. I've opened up and tested all the fuses I could see for continuity. The only blown one I could find was F1. Does anyone know its value or typical LED backlight fuse ratings? I would rather replace it than short it. The board is an 04Y2040 i7-3520M Tested fuses and status: (?=no continuity)(?=fuse not found)(?=continuity)F1 ?F2 ?F3 ?F4 ?F5 ?F6 ?F7 ?F11 ?F12 ?F13 ?F14 ?F15 ?F16 ?F17 ?F18 ?F19 ?F20 ?F21 ?F22 ?F23 ?

Read other answers
Preferred Solution: X230t F1 fuse value?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


Hi last night when I shut down I heard a whiney noise from the monitor. When I tried to start up the following day the monitor did not come on. This is the second time this has happened in the space of two days. Any suggs please?

A:monitor fuse

Read other 6 answers

My motherboard will power on for 3 seconds and then blink orange lights... I took it apart and replaced a few capacitors but that did not work.

It is not the fan.. and I removed every component I could. It is basically just the motherboard and the two main chips..

The motherboard belongs to a toshiba x205-sli1

I think it might be the fuses... but does anyone know how to test them??

And if they test bad how do you replace them?

A:How to test a fuse...

Motherboard fuses can be replaced just as easily as a capacitor. The recommended way to test if the fuse is good or not, is to remove all solder from the board fuse location pins and then test resistance with the fuse out of the board's circuit . Just use a multimeter (ohmeter) and test for resistance across each side of the fuse. Most meter's have a little button that looks like a single volume button, press this and it should beep when you have no resistance, if you have no resistance on the fuse, it means your fuse is good (i.e. you get a beep). If you don't hear a beep and your resistance is like 10, 20, 100, 200+ ohms then you have a blown fuse. You will probably have to buy the replacement fuse online, but Radio Shack might have it.

The problem with troubleshooting a motherboard is that it can be quite complex. There is typically no good method to follow unless you are extremely electronic capable.

I would start by following the power through each supply/segment. I have seen problems like this in the past be related to power supply failures, not motherboards. Motherboards do fail, yes, but a more common issue would be a power issue in the board.

What I would do is test the power board power supplies, the problem is, the only way to do this is with the laptop power on. That is NOT RECOMMENDED, it is not really dangerous, since it's only 19VDC @ 60/70 Watts, but it is a good way to mess up your computer if you're not aware of what you're... Read more

Read other 2 answers

Fuse location of backlight lcd screenDoes any one know

Read other answers

Guys, please help me to identify which one is the fuse in my monitor! There is no display on my monitor screen and it's blank. Also, I noticed that the power LED on the monitor has no light. I know that my system is working because I can see my CPU fan running and it works well with other monitor. I guess that the fuse was blown. But, I just not sure which one is the fuse.....
I've taken a picture of my monitor circuit board and uploaded at this url. Please check it out!

http:[email protected]/4720367606/

I believe that the fuse could be the one located at A, B, C or D. Based on the shape, I guess that A is the monitor fuse, but it seems like there is no way to loose or remove it. Please show me which one is the fuse, and also let me know how to remove this stubborn thing. THANKS!!!!

A:HELP ME!!! where is the monitor fuse....

The part marked "A" is a fuse. It is soldered to the circuit board so you might want to test with a multimeter to see if it is blown before you have somebody replace it.

Read other 2 answers

Hi I just fitted a new battery in my armada laptop and now when I plug in the power supply it charges for 2 minutes then blows the fuse(13 Amp).Any ideas that could help me ?Please.Pretty please!


A:blown fuse

If the charger was working with the old battery I would suspect the new one is faulty.

Read other 3 answers

When I switch the PC on , the 5 amp fuse in the plug blows! This does not happen always, but has occured 3 times so far in the last 4 weeks and is worrying. It happens only when the PC is turned on using the main switch at the back of the PC. If this switch is left in the "on" position all the time and the PC is turned on using the press-buttton in the front, the problem does not arise! Any ideas please?

Read other answers

Hi, on hindsight I should have asked this question at this forum first. But I was tired from doing all the researching and bit on an old x230 convertible laptop off ebay that supposedly has core i7 3520M, 4gb of ram, and 160gb ssd. It has been upgraded to windows 10. It has not arrived yet. At around $200, it seemed to me like a steal for the specs. I do think that these specs were user-upgraded and not factory-made so I cannot speak for the quality.I read rave reviews about this device, however, most were from several years ago. I never owed a device with this specs or a touchscreen laptop for that matter so I do not really know what to expect.I guess I will start out to see if anyone still second this as a solid convertible laptop in today's standard. Does windows 10 run well on it? Seem like a lot of people run into problems when upgrading to windows 10? Is there anything special about the touchscreen or is it just obsolete technology nowadays? I mean the most resource intensive thing I will do on this laptop is just playing some online flash games so I think it is way less than what it is capable of. I was just looking for a laptop that is upgradable and can stay relevant for a long time so did I make the right call? Any feedbacks are appreciated!

Read other answers

I was working on my comp...and I left and by the time i came back my monitor was off. So i thought it just went on standby so i pressed any key and it made the sound indicating its gonna come on...but it never did...and some funny buzzing noises started to come. I shut off my monitor and turned it back on ...to see if my desktop would come...(it usually works) but this time it didnt. This happened before....back when i had the warranty they said that the fuse blew...and replaced it.

I want to know where I can purchase a fuse from and how much it'll cost me.

My monitor is a CRT 17'.

Thanks in advance.

A:Monitor fuse problem

Fuse is a symptom not the problem - Radio Shack

Read other 3 answers

Hello all. I have read that it is possible to replace a fuse in a power supply. I love this power supply ( http://www.amazon.com/exec/obidos/ASIN/B000G7WZFA/themussou0551776-20 ), so I want to try to save it. I see a tiny fuse that appears to need soldered to replace. Do you think there is one there maybe hidden?

A:Power supply fuse

There is usually ony one fuse. You can replace it with one that has the same amperage rating (also note whether it is fast or slow blow). However, remember something made it blow in the first place. After replacing the fuse I would test it before re-installing in a PC.

Read other 2 answers

My computer blows its fuse whenever I push the button to turn it on. I have replaced the fuse several times but the fuse goes right when I apply power. Is this a power supply problem? If so are they easy to install?
Thanks so much

A:Computer blows fuse

Read other 16 answers

I have an emachines monitor that I'm trying to get a replacement fuse for (T4H250V), but everywhere I go or call can't help me. I called emachines and they can't help me either. I don't know where to go to get a new fuse or where to find one that will work. I've gone to Radio Shack, Staples and Wal-Mart. I've called emachines, Best Buy and a couple of local repair shops. Can some one please help me.

A:Need help finding a replacement fuse

Found THIS where the 3 to last item says it is a 0.5amp fuse (at 250v).

Might help.


Read other 3 answers

I've been reading all the forums here daily trying to get a little educated.
A month and a half or so I had problems microsoft seemed to take care of.
I had a ton of desktop files notepad with all kinds of things in it all over in my puter. Everywhere from documents to pictures and everywhere else. We thought it was fixed. We redid my system and lost some stuff,changed firewall and anti virus and even went to DSL. First I've got Spybot S&D,ad-aware,spysweeper,microsoft anti spyware, and the little program in Trend PC-cillin. Like on another thread I also did a Pandasoftware scan last night. It said I had spyware "Mediatickets" but nothing else picks it up. I even looked through the registry for its taces and found nothing. Today ran it again it added ISTbar but nothing else finds it. I had a froend run panda and his also came up with "Mediatickets" also found in the registry.
Panda also scanned 276,000+ files in my puter. I know I shouldn't have that much since I use and have only the basics. How can I see what all is here I don'tknow about? I have ran scans daily or even more often.
Next step is 45 pistol target practice on this computer.
Help please.
here's a log if it helps
Logfile of HijackThis v1.99.0
Scan saved at 10:57:16 PM, on 2/25/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\s... Read more

A:Solved: Fuse is getting short.

Get the new Version of HijackThis

Then reboot and repost.


Read other 2 answers

Sorry for a question no doubt covered.

I am in deep with Win 7; two laptops and a desktop with no easy out. I preorded three copies of Win 7 from Amazon when the half price deal was afoot.

Are my three copies of Win 7 RC going to last me until I have the official copies in my mitts (Oct 26?) or are they going to expire leaving me without OS's on the three machines my wife and I use every day?

If an early demise is coming, is there any way to get an extension to carry me through to the mid October date?

Thanks for any assistence,


A:The light went on; RC fuse burning until when?

Quote: Originally Posted by Roll

Sorry for a question no doubt covered.

I am in deep with Win 7; two laptops and a desktop with no easy out. I preorded three copies of Win 7 from Amazon when the half price deal was afoot.

Are my three copies of Win 7 RC going to last me until I have the official copies in my mitts (Oct 26?) or are they going to expire leaving me without OS's on the three machines my wife and I use every day?

If an early demise is coming, is there any way to get an extension to carry me through to the mid October date?

Thanks for any assistence,



Hi and yes you can extend the time limitation for up to 120 days by using the re-arm feature every 30 days (max 3x). pretty easy. At the end of the original 30 days you simply type slmgr.vbs -rearm. If you want to learn more there is a whole thread about it here http://www.sevenforums.com/tutorials...tml#post175510

Edit for stupidity: OP says RC not RTM, so my info is um wrong

Read other 9 answers

I was testing a used hard drive in an auxiliary connection to my Pavilion p6670t.  My mistake was disconnecting it before powering down the computer. Pulling the drive's power connection, I got a spark and the computer shut down.  The computer won't turn on although a few LEDs still light up.  I am hoping I blew a fuse in the power supply.   I have not removed or opened the power supply, but there's no fuse apparent from the outside.  Of course there's one of those annoying stickers telling me I void the warranty if I open it--but I probably already voided the warranty by zapping something anyway.Any advice? Will I find a fuse in that metal box, or do I need a new power supplyThanks

A:Is there a fuse in my power supply?

Hi, Yes, a PSU has fuse in it but in your case I can't see anything wrong with the unit itself because the LED's still light up. Anyway,  please read it to find out where is the fuse & post back your result.   http://www.techrepublic.com/article/learn-to-re-fuse-a-power-supply/1053277 Good luck,

Read other 5 answers

hi ,
im using turbo linux 10 when installing ntfs-3g , fuse is a dependency ...i tried in stalling it nut get this error
== configuring in kernel (/root/fuse-2.7.4/kernel)
configure: running /bin/sh ./configure '--prefix=/usr/local' --cache-file=/dev/null --srcdir=.
checking for a BSD-compatible install... /usr/bin/install -c
checking if FUSE is loaded as a module... no
checking if FUSE module is built into the kernel... no
checking if FUSE module is from official kernel... no
checking kernel source directory... /usr/src/linux-2.6.0
checking kernel build directory... /usr/src/linux-2.6.0
checking kernel source version... Not found
configure: error:
*** Cannot determine the version of the linux kernel source. Please
*** prepare the kernel before running this script
configure: error: ./configure failed for kernel
i dont know if it is due to the fact that im using kernel linux-2.6.0
..is there ne other tool similar to ntfs-3g

A:Ntfs-3g & fuse-2.7.4 error

you need to install the system header files.

have you been able to use Config or MAKE previously with success?

Read other 2 answers

My monitor cannot be switched ON. So I took the cover and checked the fuse. The fuse was blown. So I replaced the same type of fuse, and as I connected the power code of the monitor without switching ON the fuse again blew.

Any Suggestions.

A:monitor fuse blown

Check this website -


about half way down is a great readthrough on why monitors blow fuses.

Read other 2 answers

Hello people of the Lenovo forums. A friend of mine just gave me his Lenovo x230t, it looks like he tried formating it and handing it over to me but he didn't install all the drivers or what not. The laptop itself is from France (french keyboard) and I think when he installed the windows it was in french as well, I changed the setting and made it so everything is in english but when I installed the Lenovo System Update app it installed it in french and I cannot change it, same goes for Realtek. I went through this websites find and recommed me stuff to install, and it did install all the intel drivers and a bios update also I myself installed the driver that activates the tablet keys (screen rotate, task manager). My question is should I just clean install all over again? I got the windows key here so should I just reinstall the whole PC? its new so I got nothing important on it. If so, how should I go about it? I don't have the windows disk or any other driver disk. Another issue is that I cannot use my fingers on the touch screen, it only works with the stylus. I've seen people online scrolling through web pages and PDF using their fingers in touch, also using some other cool functions like opening all the curret apps in a scroll by pressing 4 fingers against the screen. Do I need to install a certain driver to do it? if so where? Sorry for writing so much and thank you for taking the time and reading it.I apologize if I broke an... Read more

A:Some help with an x230t windows 10

Hello and welcome,
I'd be inclined to do a clean install, followed by System Update.  Since Win 10 has already been activated on that machine you likely won't need the key.
You can download Win 10 direct from Microsoft.  I haven't looked at the MS tool lately and don't know if the download varies by version (Home, Pro, ...) but if it does pick the one that matches your key.

Read other 1 answers

Has anyone had any issues upgrading their x230T from Windows 7 to Windows 10? The installer demanded that I uninstall my Wacom ISD driver before upgrading, and I want to make sure there are available Wacom pen drivers for Windows 10. In addition, does the rest of the x230T features work with Windows 10 (i.e. trackpoint, fingerprint reader, volume/microphone, screen rotate, and ThinkVantage button)? I don't want my x230T to go from being a convertible laptop/tablet to being a regular old laptop with a spinny screen.

A:x230T and Windows 10

Same question here - would like to know whether there are driver issues with updating the x230t to Windows 10 before screwing up any functionality

Read other 4 answers

Hello Everyone, I recently dropped my x230T in my bag and although it and the hard drive was fine, I have noticed the fan goes to full speed whenever I boot the laptop or do anything, regardless of usage. The only thing that can calm it down is lenovo power manager when it boots in Windows but only barely. Any slightly cpu intesive task, the fan goes back to full speed. Any other OS, such as linux Mint, the fan will continue at full speed.  Has anyone encountered this issue before or has any advice on how to further diagnose the issue?  Kindly Appreciated,Adam 

Read other answers

My X230 table fell on it side while a wireless mouse receiver was installed and damaged the usb port and knocked the chip behind  it out of place on the main board, I have attached a picture. Does anyone have a picture of the chip or know the name? I am trying to locate it to fix my machine.

Read other answers

Does the DMP300 have a user-replaceable fuse, and if so, what type and where is it located?

Friend's trying to get one working again for an older computer he also has, and commented it acted like a fuse had blown.


Read other 7 answers

I blew a fuse last night in my house, I have 2 computers which run on a Linksys router. (not wireless) I have my computers hooked up to their own power strip. One works this one and the other says that I have limited or no connectivity. Of course noone else can help. Can someone look over my hijack this log and see if anything is unusual. I also can't do a system restore. It will go thru and restart then say it couldn't do it. Thanks to all that help!!! I did rum Mcafee and my adaware.

Logfile of HijackThis v1.99.1
Scan saved at 2:31:37 PM, on 7/27/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Sony\VAIO Media Music Server\SSSvr.exe
C:\Program Files\Sony\Photo Server\appsrv\PhotoAppSrv.exe
C:\PROGRA~1... Read more

A:Please help blew a fuse last night now I can't get online

Hello and Welcome to TSF!

To get immediate notification of fixes as soon as they are posted by our Team, please subscribe to this thread. Click the "Thread Tools" button located in the original thread line and selecting "Subscribe to this Thread".

You should not have any browsers on while carrying out the Fix. So please save the following instructions in Wordpad as this page would not be available then. I have customed my instructions on the assumption that you have Wordpad 'On'. If you should choose to do otherwise, it may lead to some confusion.

If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are carrying out the procedures below.

It is also important you don't miss a step and perform everything in the right order!!. .

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

Please download these additional files/programs. Do not run them unless instructed to do so.
Unless otherwise stated, they should be stored in same directory as the HiJackThis program.

CleanUp! - Install.


Unplug your computer from the Internet when you have finished downloading

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

Uninstall the following programs, if present, using Control Panel > Add/Remove Programs : New Dot Net
Su... Read more

Read other 1 answers

May someone provide me a picture or reference or information to where I may find the F7 fuse on the t450s motherboard? I am trying to replace it but cannot locate it.

Read other answers

I have built a couple of gaming PC's before and this is by far the weirdest problem I have had!

The system boots fine however when it reaches a certain stage of the Windows 8 install to the SSD it suddenly fails and cuts off and refuses to boot up for a while (fans do about one rotation and then power cuts out again when power button pressed).

Now I read around and found this is probably something shorting some piece of hardware in the system so it cuts off to save itself. Once or twice when I turned on the switch at the mains with the psu switched on the fuse for my desk sockets blew.

My question is how would I go about diagnosing and ultimatly fixing this issue as I am not able to do some pieces of work without my desktop. ?

My Hardware is:

-Cooler Master HAF XB Case
-Coursair H100 CPU Cooler
-Corsair TX850 PSU
-Asus Sabertooth x79 mb
-Asus AMD Radeon HD 7970
-Corsair Vengeance 16GB 1600MHz (2x8gb)
-Intel I7 3820 quad Socket 2011

Kind Regards


A:Solved: Fuse During Windows Install

Read other 11 answers

I just finished burning a DVD on my LG burner, and then started to burn the label with Lightscribe, but it couldn't find any LightScribe drives. I then noticed that the activity light on the LG kept blinking and then found that I couldn't open the drive, so I rebooted, thinking that would release it, but it didn't. I had to remove the DVD with a paperclip.

I then continued to reboot, but the drive detection seemed to freeze much longer than usual, and then Windows froze at the startup screen. I shutdown and disconnected the drive, which seemed to fix the problem, though boot time was still a bit longer than usual.

I then started to attempt to burn the label again, with my Samsung burner, but again the LightScribe labler said that it didn't see any LightScribe drives.

Even though the LG is the newest drive, the SamSung is not all that old itself, and I can't imagine why they both would decide to act up simutaneously. The Samsung is operational as far as reading disks (I didn't test it for burning), so would anyone have any idea of what the problem might be...besides gremlins?

A:LightScribe Drives Blew A Fuse

Have you tried disconnecting the Samsung and then rebooting to see if the boot is still slower than normal? Also try the LG drive again with the Samsung disconnected. I've seen cases where the drive that is suspected of being the problem isn't the one with the problem but another device is the problem.

Read other 3 answers

i need some help please, for a while now when i press the switch at the wall socket the pc makes a kind of "popping electric noise" for a split second but i've just been ignoring it, so a few days ago i took the graphics card out of the motherboard to clean it of dust, i unscrewed the plastic cover and vacuumed the heatsink then re assembled it and put it back in the desktop, then i tried a video game and it restarted the computer...i tried a less graphically intensive video game and it was fine, but the next day it started to shutdown when windows was starting up and bluescreens of death. so i left the pc for a few days and today i turned it on and it shutdown immediately followed by a horrible electrical smell and it popped a fuse in the fuse box downstairs. The motherboard and cpu is about 6 years old, but the graphics card is only about 3 years and the PSU is a good one from corsair.

EDIT, there is no power going to the motherboard (no green light) and it wont turn on.



A:graphics issue and fuse trip out

Power supply. Anything internal would have toasted the power supply and/or it's internal fuse. If a circuit breaker tripped, there is a fault on the circuit. Assuming the fault is the PC, it's the PC power supply. If you are lucky, it didn't damage any other hardware when it failed. Most often, that is not the case.

Read other 1 answers

any one know where is back light fuse on Dell 5423?

A:Dell 5423 backlight fuse

Unfortunately, there are no backlight fuses in the computer. What is the issue you are having with the computer?

Read other 1 answers

Hello there,

This is the first time I have posted.
My PC power supply keeps blowing the fuse. it tends only to be when I am doing something that uses alot of memory, especially when trying to convert .avi files into .mpgs
The PS is 450w and I have an athlon 2400 processor and 192MB RAM
Do you think the power supply is inadequate as I have upgraded it recently and it doesn't blow the fuse as often now but it still does it when using alot of memory. I have tried it in different sockets and have the same probs.

Any help would be greatly appreciated. Mitchy

A:PC power supply blowing fuse

What make of psu is it?

Read other 6 answers

I have a 2nd gen X1 carbon (20A7) that was running great until the backlight on the LCD display suddenly stopped working. I read a bunch of forums, opened up the machine, and ultimately traced the issue down to a blown fuse (F12) on the mother board. Can someone, anyone, please let me identify the type of fuse this is so I can buy a replacement? top side of motherboardarea typically under kapton(?) filmclose up view

Read other answers

I guess this is a very old thread, but I am having the same problem with my ThinkPad T520.
The battery is fine, but it will not power the laptop. I'm thinking it may be a pico fuse on the motherboard.
Turning the laptop off for a few minutes as suggested does not work. Taking the battery out and pushing the power button for 30 seconds does not work. Buying a new battery just because Lenovo says my old one is dead does not work for me.
Anyone else having similar problems?
Moderator note: post moved from 6-year-old B & G thread to T series forum for visibility.  Subject edited to match content.  Was:  Re: Reset Surge Protector on Motherboard - PLEASE HELP

Read other answers

I've bought laptop Lenovo X230T type: 2325-2A4. I've made the full system instalation (Windows 7 64-bit) with all drivers. And on the laptop I can't use the finger screen touch (works only pen). Is it possible, that on that model there's no finger touch?

A:Lenovo X230T touch

2325-2A4 is a notebook, not a tablet.  There is no touch - finger or pen

Read other 1 answers

My ThinkPad X230tSuddenly stopped working on battery and works only on charger plugged in. I thought the problem was with the batter so I brought a replacement. I replaced the battery with the new one, but it didn't work, so I thought the battery was empty. I connected the charger and charged the batter full for an hour or so till it was 100% charged, yet, when I unplugged the charger the laptop was dead. What could be the problem?

Read other answers

Hi, I was wondering if anyone can confirm if Lenovo Blu-ray drive, MPN 45N7463 is compatible physically and fully functional with the Ultrabay 3 series using my X230 tablet (I7/16GB) when docked.Thanks!

Read other answers

Dear all,after going to sleep caused by low battery level, my X230T does not boot again- besides the sleep, orange battery and the WIFI LED there is no light. Those three are turned on constantly (no blinking) It does NOT help:- Change CMOS battery- Plug-in AC-supply without CMOS battery attached After all resetting measures, there are no lights turned on. After pressing the power button, the mentioned three LEDs will turn on. There is no fan, no noise from the computer. Do you have any idea? Thanks,Matthias

Read other answers

Greetings, it's a little confusing to choose the right model for the X230T. so , in specific, i'd like to know which Active stylus, or digital pen, from lenovo can Upgrade the level sensivity from the basic stylus of the model X230T. thank you

Read other answers

Hi, I was wondering if anyone can confirm if Lenovo Blu-ray drive, MPN 45N7463 is compatible physically and fully functional with the Ultrabay 3 series using my X230 tablet (I7/16GB) when docked.Thanks!

Read other answers

Hello all. My X230T screen had dead pixels, and laptop was under warranty, lenovo came and changed it.but only a few months after my screen started doing that depending of the inclination. if I move it, it change the "band" color, and on some position, it works OK.  I found on aliexpress replacement panels for 50$. Before buying it, I have few questions. 1) My screen has scratches. Is the panel I will buy will directly replace the one that is there, or is there a "glass" in front that I should replace at the same time, or is it the touchscreen ?I imagine there is a protective glass in front because there is the "lenovo" sign showed for instance and it's not present on the panel, and it seems to be same part. To said it other way (sorry for my english), when I put my finger on the screen, do I touch directly the panel (that will be replaced) or is there any sort of covering glass in front? 2) I think some screen problem like this can be due to a faulty cable, but from what I read the problem would be on whole screen, not only on a line like it is now. Can anyone confirm this ? 3) If indeed it's the panel that is defective, in this kind of situation is it possible to "fix" the panel, like I don't know, putting something to "push" on the false contact so the contact stays ?  4) My panel is LP125WH2-SLB3. I'll replace it with LP125WH2-SLT2. Seems the same to me. Or any other model to recommend that would be still IPS (I found lot of "c... Read more

A:screen issue X230T

microsoft office 365 support number gives information of office 365 . on using our packages or services of our microsoft office 365 support our tech support share latest application with you users. If you have any query related to latest or old version of operating system then our experts supports you. Our tech support 24*7 availble for the users. You can easily install, upgrade and troubleshoots by using our toll free number. for more information please visit my website and call mt toll free number.http://www.msofficesupportnumber.com/microsoft-office-support.html

Read other 1 answers

Hi everyone, Recently, in facing a problem with my screen of the X230T which is blinking (https://youtu.be/_DZiiO0II90). As I'm not an expert, do you think I have to replace the LCD display? Thanks for your recommendation 

A:X230T Screen replacement?

That kind of error is almost certainly the panel.

Read other 1 answers

Hey guys. It's me again. And I can't find a solution to this.Lately I've got USB 3.0 issues. In Device Manager it shows 2 drivers and devices as "Unknown USB Device (Link in Compliance Mode)". I don't know why it came up but this is driving me crazy. I've got toast notifications from this. My USB 3.0 flash disk won't always connect to laptop. And when it will connect, it takes a while before it does. But in Win7 all worked perfectly and I really don't know a solution to this.I tried reinstalling driver, updating. But it's working for a while. After that it's still showing an error. And there's no USB 3.0 drivers from Lenovo for Win10. Has anyone encountered that kind of problem in their ThinkPads? Or anywhere?

Read other answers

Faulty equipment being used by a contractor blew a fuse and my computer was shut down. Since then my pc shuts down with an
DPC Watchdog Violation error.  In the past when the power has gone out, it's has worked fine after a reboot.

*I have updated drivers.
*I have run a disk check/fix
* I have have turned off "Fast Startup"
None of these tasks have been successful.  I am not a tech person, so please be kind. Any suggestions?  (This computer is only a year old) I use am still using 8.1, beccause I find that Windows 10 slows down my system. Thanks.

Read other answers

I hate laptops with a passion but keep trying to fix 'em - lol - mostly successfully.

However . . . I recently made a foolish error, however, and could really do with some guidance as to remedying the situation.

I replaced a screen in a Toshiba Satellite A200-1RK, which although a little tricky (my first screen replacement) - went

without a hitch.

However, the laptop came with a charger whose business end had been squashed in a car door -

I checked it visually but to my regret NOT with a multi-meter. The charger has a short and has blown something on the


The symptoms are as follows:

1. Laptop worked fine post Charger Incident on battery until the battery became flat which leads me to believe mobo is

essentially fine.
2. Even with a known working charger, the Blue DC IN ie Plug symbol flashes blue
3. When charge was remaining in the battery, a so called hard reset - namely removal of battery pack and lead and holding the

power button for 30 seconds - would induce the DC IN light to remain solid blue and the battery light to be solid Orange
4. Now battery is flat the state of play is as 2. ie will not power from DC IN 19v

Looking at some info from http://www.hardwareanalysis.com/content/topic/51345/ -


After checking the connection, perform the following:
Check 1
Replace the AC adaptor with a new one. If the AC adaptor is still not functioning properly, perform Check 2.
Check 2
Use a multimeter to make sure that the F8800 fuse... Read more

A:Toshiba A200-1RK Blown Motherboard Fuse?

Neither fuse is blown.

Read other 1 answers

The main power lead fuse(power park) keeps blowingon my PC. I have replaced more than 3 now: please i need your help, i could be the cause? And how can i solve the problem?

Read other answers

The main power lead fuse(power park) keeps blowingon my PC. I have replaced more than 3 now: please i need your help, what could be the cause? And how can i solve the problem?

Read other answers

Somebody bulged speakers into the wrong jack and made the screen go dim, I've dismantled the laptop but I'm finding it hard to located the f1 fuse can somebody assist me please. Will be much appreciated. Thank you

A:Dell Inspiron m5040 f1 fuse location

Try this: Dim Laptop LED Screen – F1 or F8 Fuse just below the motherboard video connector | NWA PC Help

Read other 1 answers