Over 1 million tech questions and answers.

Lenovo G50-80 touchpad not working properly when t...

Q: Lenovo G50-80 touchpad not working properly when t...

I bought a Lenovo G50-80 (intel(R) Core i3-5005U, 2GHz) a few months ago. A week after buying, I noticed touchpad not working properly while charger plugged in, also it was not working while my printer?s USB cable connected. Touchpad button and finger tap working fine but, cursor hanging or moves very slow. When I unplugged the charger and printer cable touchpad working fine. But, it was not working anymore (it is also not working properly when the charger and printer?s USB cable unplugged). Usb mouse working perfect.My Laptop have installed windows 7 64bit operating system. I tried to reinstall windows 7 64bit ultimate and professional os (Not other like windows 8 or 10), I updated a latest bios and touchpad driver from Lenovo and synaptics website, But I am getting same problem.

RELEVANCY SCORE 200
Preferred Solution: Lenovo G50-80 touchpad not working properly when t...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Lenovo G50-80 touchpad not working properly when t...

Hi there, Nmparmar -

Thank you for writing in to the Lenovo Forum - happy to have you here today.

Can you try to:
Make sure you use the original 65W 20V/3.25A or 90W 20V4.5A AC adapter that came with the unit.

Plug the AC adapter in another wall outlet in your house (preferrably another side of the house) - if this works, the original wall outlet that you used before when you got the issue may not be properly grounded.

Perform a power drain by:a turning the PC OFF. Remove the battery & AC adapter then hold the power button for 30secs. When done, reinsert the AC adapter and battery then boot into the BIOS by pressing F2. When inside the BIOS, press F9 to reset default settings and press F10 to save and exit.

Update the Touchpad Driver below:

Synaptics Touchpad Driver

Update us how it goes.




Regards,

Tap that kudos button if I helped If you find a post helpful and it answers your question, please mark it as an "Accepted Solution

Read other 3 answers
RELEVANCY SCORE 82.4

The hinges on my computer were askew, so I sent my computer to the service center. After 3 weeks, they returned my computer to me and told me that the top "chassi" and the bottom cover have been replaced. Not sure what they meant, because the people that fixed my computer were not there at the store to explain it to me, but I'm assuming that it's the top and bottom cover of my computer. I was told that the hardware and the software are still intact, because they didn't have to alter anything during the reparation of my computer. The first thing I noticed when I started using my computer again is that it is very slow. It makes that "thinking" clicking sound all the time, even when I'm not using the computer (No programs/files open, long after the computer's startup). The system was VERY slow. It was laggy and irresponsive most of the time. I deleted multiple useless files and download new antivirus software to make sure that my computer is clean. The computer is no longer laggy, but the "thinking" sound is still there (it's there all the time).  The second thing I noticed is how my touchpad didn't respond to my click. I can move the cursor around perfectly fine, but I cannot click. Neither with a tap on the touchpad nor with an actual click on the touchpad. The touchpad registers my touch, but not my click :/ Does this have anything to do with the aforementioned hardware/software/harddrive/drivers? (My computer terminology is terrible, sorry). Thank you.&nb... Read more

Read other answers
RELEVANCY SCORE 66.8

 Touchpad on Lenovo Y510P has come to the point in which is useless at all. I bought the laptop from a friend of mine and he told me about the issue but I thought I was not going to use the touchpad as much so it was fine to me. It was working just fine with some lagging here and there, but now it us just useless. clicking, jumping, lagging all the time. I tried uninstalling and installing a new driver from lenovo and it ended up being a waste of time because it just made it worst. I tried downgrading From windows 10 to windows 8 and it didn't work either. Plus I also tried doing a fresh installation of the latest driver I found for Elan touchpad and it helped a little, but still there. I really just don't know what else should I do  I am currently running the latest version of Windows 10 Home 64bit, and since going back to windows 8 didn't help at all I just don't consider going back to it as an option anymore. Also I did notice that while reinstalling windows 10 the touchpad was working perfectly fine, and I believe so that it was because it was running with a generic driver windows might provided for it to be usefull during the installation. Thoughts?

Read other answers
RELEVANCY SCORE 65.6

My touchpad is not working properly.I can drag my cursor using it but am unable to hold it or tap it to select something which causing several inconvenience.

Read other answers
RELEVANCY SCORE 65.6

Hi i have hp i7 4712 laptop.but its touch pad is not working properly.Because when i using it some its stop for few minute and then it start working.

Read other answers
RELEVANCY SCORE 65.6

No idea if this is hardware or software, but I'm trying this first.

I have an Inspiron 1525 laptop running Vista. My touchpad stopped working for some random reason a couple days ago except for the buttons. It might have started working again a while ago, but I just noticed 2 hours or so again that it was working, except for 2 things: I can't do that... uhhh... dunno what it's called, where you click the two buttons together and it does what clicking the mouse wheel on a normal mouse would do... and I can't scroll. The thing on my taskbar that tells me where my finger is on the touchpad has disappeared, as well.
 

A:Touchpad not working properly

Touchpads are usually proprietary pieces of hardware that have drivers supplied by the manufacturers. Check your device manager and settings in Control Panel (it may be under the Mouse settings) to be sure everything is all right there.

You might also go to the manufacturer's web site to check on a driver, and maybe an update to it. You could always reinstall it, anyway.
 

Read other 2 answers
RELEVANCY SCORE 65.6

OK so now if my touchpad is switched on the mouse cursor sometimes makes continuous erratic movements around the screen. Turning it off solves this problem. Is this a sign it's wearing out, or is there something I can do to stop this?

A:Touchpad not working properly

What state is your laptop on when the touchpad issue occurred? This happens on my fujitsu laptop when charger is plugged in. After a quick googling, found out that I just had to put the "brick" part of the charger to a good distance away from my laptop. Worked wonders! Issue usually happens with replacement chargers (due to voltage or ampere incompatibility).

Not sure though if this was your case.

Read other 0 answers
RELEVANCY SCORE 65.6

i am using hp ay008tx and have installed latest driver as recomended on hp website of SYNAPTIC TOUCHPADV1.3.. sometimes i have to click twice ot thrice to get one click.

Read other answers
RELEVANCY SCORE 65.6

My hp touchpad isn't working properly. It stops after sometime and windows 8.1 is working really slow. Kindly fix this issue as soon as possible. I shall be highly grateful to you.

Read other answers
RELEVANCY SCORE 64.8

 My lenovo laptop has a terrible beep beep sound when i start the laptop. And when i click any icon on the destop it  opens the recycle bin (its on the top left corner) and when i refresh the destop always the recycle bin is highlighted. When i type something on the internet to search or a message the line ( which blinks when we type) always goes back. So I cannot even type anything correctly. I can't move the scroll down when i am on the internet the scroll goes up again. i need help.

A:Lenovo G570 beeps constantly on start up - keyboard and touchpad don't work properly

Shanuka,
Welcome to the forum!
 
Would you turn off the system and restart and see if you can go into BIOS?   If you get the constant beep on startup and are unable to press F2 (I believe it is F2) to enter BIOS, then it sounds like you may have a stuck key on the keyboard, or the cable for the trackpad or keyboard is not fully connected to the systemboard, OR the internal cables are pinched.   If this is the case, then I think you probably need to contact Lenovo service for help as it is likely a hardware issue.
 
If you are able to go into BIOS, are you able to move around in there?  You could try reloading BIOS defaults and reboot.  If everything works in BIOS and the problem is only in Windows, then it could be a driver / setting (less likely), but you could try to open mouse in the control panel and check settings.
 
But just based on the symptoms, it really sounds like either the touchpad or keyboard has a stuck key or is acting as if one is stuck due to the bad cable connection or a short.
 
Mark

Read other 9 answers
RELEVANCY SCORE 64.8

Hello hi im lili b any my toupad isnt working right the dang strolling up or down wont work and I cant fix it I have an hp pavilion dv4 1435dx could someone help mi find the orrect driver that could fix it
 

A:Laptop touchpad is not working properly

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3979336&lc=en&cc=us&dlc=en&lang=en&cc=us

You should find the drivers you need here. Click on next By the windows 7 64 bit box.
 

Read other 2 answers
RELEVANCY SCORE 64.8

my laptop keyboard not typing but I know its working cause when i hit CAPS LOCK the indicator light will switch on and when i hit letter N network will show up... touchpad also not working properly... when i double click my file document, the property document will show up not the document itself. when i hit right click nothings happen or nothing showing up... but when i accidentally hit ESC right click button work perfectly but left click button still doesnt work.... and every time I restart my computer I always hit ESC just so the right click button will work.. I already refresh/reset/reformat my computer... nothings changeI even Upgraded the Bios.... still nothings changeI Uninstall/install alps touchpad driver... still notings change  Please help me... I dont Know what to do anymore 

Read other answers
RELEVANCY SCORE 64.8

My scrolling up and down option of touch pad is not working what should I do...?
 

A:My laptop touchpad is not working properly

Are you referring to the the right side scroll bars on laptop touch pads that allow you to scroll up and down pages?

Try updating the driver for your touchpad and see if that helps.
 

Read other 1 answers
RELEVANCY SCORE 64.8

My laptop touchpad is not working properly; that is I cannot scroll properly and also have problems with the sensitivity of touch. I downloaded and installed the Synaptic touchpad driver but it is still not functioning very well. Please can someone help me with a solution.
The name of my Laptop is; Compac Presario CQ50-115NR Notebook PC
Thank you.
 

A:My laptop touchpad is not working properly

Go to Start -> control panel -> Hardware and Sound.

Somewhere in there you should find adjustments for the sensitivity.

If this does not work please state your operating system for further help and try it with a USB mouse.
 

Read other 6 answers
RELEVANCY SCORE 64.8

I upgraded windows 10 about 2 days ago and from that my elan touchpad starts to not working after some minutes of usage, it always detects an unexisting tap.
I tried to uninstall and reinstall the driver but it seems to not working.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:G50-80 - Elan touchpad not working properly after ...

Good day and welcome to the community.Please provide more information about your system model, otherwise it may be difficult for the community to assist you. We will also be able to confirm that your post is in the proper forum.Regards.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other 2 answers
RELEVANCY SCORE 64.8

Brand new chromebook and the touchpad lags, or does't respond correctly (scrolling when it shouldn't, clicking the wrong area, etc.)  Is there somethig I can do to fix this?

A:chromebook CB5-311 touchpad not working properly

Factory resethttps://acer.custhelp.com/app/answers/detail/a_id/11188/~/how-do-i-recover-my-acer-chromebook%3F Replace the Chrome O/S recovery drivehttps://acer--uk.custhelp.com/app/answers/detail/a_id/27636/~/how-to-create-recovery-media-for-a-chr...

Read other 2 answers
RELEVANCY SCORE 64.8

Hi, I have a dell laptop dell latitude e6410 running on Windows 7 32bit and mouse touchpad is irattic and not working properly, can anyone give me the right driver for that?
Thanks

A:Mouse touchpad not working properly

www.dell.com/.../driversdetails

Read other 2 answers
RELEVANCY SCORE 64.8

I have a HP Pavilion DM4-3099se Laptop with a Intel Core i5 dual core processer and 6GB of RAM. On this laptop is a Synaptics touchpad and uptill now it was working fine. It recently started glitching and now when i move my finger on the touchpad, the mouse moves but it repeatedly stops and then starts moving and then moves in all different directions. I went to the Synaptics website and installed the latest drivers for the touchpad and the installation was successful but the trackpad was still the same way. My external wired mouse works fine right now though. I tried restoring my system the earliest point there was on the list and still no improvement on the touchpad. Please help. Thank you.

A:SYNAPTICS TOUCHPAD NOT WORKING PROPERLY!

Thanks everyone for reading but I already fixed the problem. My computer shipped with two Operating Systems, one being windows 7 and the other being HP QuickWeb. I just booted into HP Quickweb and my trackpad was working fine and then i booted back into windows and it worked perfectly after that. I just though i would let you know and can somebody please close this topic because i dont know how to. thanks.

Read other 2 answers
RELEVANCY SCORE 64.8

Hi I have a Samsung RV510 laptop and I have a problem with the elan touchpad. It can scroll up and down but I when I click or tap on anything it doesn't do anything. I am using a USB plug in mouse but I am working on an university assignment and I need the USB portal to save my work on an USB key. Before Christmas I had the same problem and I went into the tech support in uni and he said that I had set the left click button to right click function or something like that and he went into control panel and mouse to resolve the problem. He fixed it by doing something in Mouse under Control Panel but I just can't remember what and by the way I have the setting where the elan touchpad is disabled when an USB plug in mouse is inserted. I really need help today if you can ! I have tried to adjust the settings of the touchpad in Mouse in Control Panel but even switching the buttons does not do anything to solve the problem. Sometimes when I start the laptop the touchpad works fine but an indication that is going wrong is when I am scrolling the screen with the touchpad the pop up that appears on screen when one right click appears by itself and keeps appearing whenever on the screen I move the touchpad mouse. After that the tap to click as well as left and right click buttons fail to work at all and I do not know if this is a software problem or is it a hardware problem as I said I encountered this problem already and now it's returned. Thanks
 

Read other answers
RELEVANCY SCORE 64.8

1. when i start my laptop, touchpad works fine but after a while it starts missbehaving. right click n left click work fine but cursor is out of control.i have checked if its driver is not updated but it is updated.i uninstalled its driver n installed it back but even then it is not working. i read somehwere if its touch screen is turned off then touchpad works fine but even if i turn touch screen off it does not work.2.i dont know about other function keys but i use function keys for brightness and volume all the time. i dont know if it was last window update or what else went wrong that these function keys are not helping anymore. These keys still make a pop up sound which means keyboard buttons are working fine.please help.

Read other answers
RELEVANCY SCORE 64

Hi, I have a strange problem with my inspiron Inspiron 15 (N5050). When I plugged in the AC charger, the touchpad / mouse does not work properly. Sometimes it moves and sometimes not eventhough I have moved and touched the touchpad. When I disconnect the AC charger, the touchpad works perfectly fine. Can anyone give me advise on this? thanks in advance

A:My mouse/touchpad is not working properly while charging

Hi suneel_zee.
Welcome to the Community,
Have you tried different power outlets? Does this happen in different locations(even outside you house/work)?
I would suggest you to release flea power.To release flea power disconnect AC adapter,remove battery,disconnect all external peripherals(USB devices),press and hold power button for 30 seconds.
Reconnect the battery and AC adapter.Check how touchpad responds with AC Adapter connected.
If the issue persists try a different AC adapter(may be borrow from some one who uses same watt Dell AC adapter).
Let me know how it goes.
Thank You

Read other 11 answers
RELEVANCY SCORE 64

I just reformatted the HDD on my girlfriends laptop and now the touchpad mouse is not working properly. The scroll wheel doesn't work and when scrolling down on a web page with the keyboard it goes step by step. Are their any settings that I need tochange to make it work right?
 

A:Laptop touchpad mouse is not working properly

Some touchpads require specific drivers installed. Did you install these from the manufacturer? This is the integrated one on the laptop not add-in devices?
 

Read other 3 answers
RELEVANCY SCORE 64

I love my Satellite T110-107 but there are issues with the TouchPad.

1). The mouse cursor doesn't move at times. With this one I can get it to move by taking both hands away from the laptop for a moment.
2). The mouse cursor suddenly 'shoots' off to the right hand of the screen.

I've tried changing the touchpad sensitivity to both the minimum and the maximum levels, i've adjusted the 'Palm' sensitivity but nothing seems to help other than by making the sensitivity low which helps a little.

I've also noticed that when the laptop is on my lap, the problem is worse than if it's on a table.

I think that it's a problem with a build up of static on the case.

Any other ideas?.

A:Satellite T110-107 - Touchpad not working properly

Hi buddy,

I use Satellite T110 for months now and really and no problem. Everything runs great and I don?t have any problems. It?s really great notebook!!!

So it must be something wrong with yours or installation.
First of all I would recommend updating the touchpad driver. You can download it on the Toshiba website:
http://eu.computers.toshiba-europe.com

After this you should test it again. Check also the touchpad settings again. There are a lot of settings to improve touchpad.

Read other 2 answers
RELEVANCY SCORE 64

I upgraded windows 10 about 2 days ago and from that my elan touchpad starts to not working after some minutes of usage, it always detects an unexisting tap.I tried to uninstall and reinstall the driver but it seems to not working.

Read other answers
RELEVANCY SCORE 63.6

Hi. I'm a first-time user and happy to have found your website!

My operating system is Windows 7. I am using a wireless Logitech Mouse (uses USB hardware). I have had this laptop for 5+ years.

PROBLEMS:
1. The touchpad will not ?turn off.? Under "Mouse" on the Control Panel, functions for the Dell Touchpad should allow me to simply turn the touchpad on and off. Regardless whether it is in the on or off position, it is still on.
2. Even when I don?t touch the touchpad, the cursor skips around the screen, highlights text and deletes text. Typed text re-locates within earlier typed text.
3. There is an on/off light at the top of the touchpad that indicates the touchpad is on/off. This is not working.
4. Also this panel item allows me to manage sensitivity, buttons, gestures & edge scroll & zoom. I can work these, but the Edge Scroll & Zoom buttons do not see to change the settings.

WHAT I HAVE DONE TO ATTEMPT RESOLUTION:
1. I have checked the drivers for both the touchpad and mouse and I get messages that they are each up to date
2. Because the touchpad will not turn off, I have tried to manage the buttons to turn down the sensitivity, to minimize movement of text. This does not help.
3. Turning on ?Disable Touchpad & Point Stick when USB Mouse present? does not disable the touchpad.
 

Read other answers
RELEVANCY SCORE 63.6

The touchpad on brand new Lenova Yoga 720 does not function properly. After install, mouse pointer does not show and the touchpad does not work. The only way to get around on the computer is the touchscreen. Keyboard still works. A hard reset solves the problem temporarily. To get the mouse to show and the touchpad to work, I will have to hard reset the laptop everytime before desired use. If the computer goes to sleep, the touchpad dissapears. I do not think that the touchpad shows up anywhere in my devices. I am not sure because I do not know what the file may be called. Otherwise, I would uninstall the driver and re install. Support said to download driver off website, there isn't a touchpad driver available for download. I'd like to keep this laptop  and correct this issue. But it is a new computer so if there isn't a solution soon, I will return it instead of wasting time adding to it. Seems that many have had similar issues. Anyone any closer to an answer? Hello? Help?  

Read other answers
RELEVANCY SCORE 63.6

Hi, I got my HP ENVY 15t-q100 CTO Notebook PC in September, 2014. It has Windows 8.1, 64-bit. For the first few weeks of use, I did not have any issues. Then, I started having more occurences of cursor/touchpad issues to the point where it happens every hour of use (not an external mouse issue): Jumps around on screen (a few millimeters to inches). Move incrementally on its own without me anywhere near the laptop (generally spazzes to the left). Not allow scrolling/normal touchpad functions when issues are occuring. Functions as if I am holding down the click button while I try to move it - most frustrating part when I am doing important work. Randomly click stuff as I attempt to move it.  Here is what I have tried to do to fix it and has not worked:Roll back driver (didn't work). Update driver (no updates available). Reset device (works for a minute or so). Restart (I do this daily anyway). Reduce cursor speed and other mouse options suggested online.   I have seen similar issues for the HP Envy 17 and other notebooks, but no actual fixes have been proposed. Please help me with this issue. 

A:Cursor jumping, sporadic, and touchpad not working properly ...

Hi Please find the link given below might help you to fix your issue. In case you have already tried the steps let me know. Link Try updating the Bios then update the update the driver. Try performing a system restore to the date where unit was working fine.

Read other 9 answers
RELEVANCY SCORE 63.6

Hi,

On windows 7 the touchad isn't working properly meaning that I can't scroll on pages by sliding my finger at the edges of the touchpad. It worked perfectly witn Vista and now it's not. I have 64bit version.

I searched for new drivers but there aren't any. How should I resolve this?

Thanks,

A:Portege M800 - Touchpad not working properly on Windows 7

What Model do you have exactly?

PPMxxx-xxxxxx?

Read other 5 answers
RELEVANCY SCORE 62.8

Hi guys, I hope someone can help me with this:

So I recently upgraded from Windows 8.1 to Windows 10 and I noticed a few issues with the touchpad on my laptop.

1: two finger scrolling no longer works. Now I have to drag one finger on the right edge of the touchpad up and down in order to scroll vertically.

2: I've also noticed the blue loading circle beside the pointer keeps flashing roughly once per second whenever i leave it alone, even if I am not running any programs. I can leave it on the desktop and the blue circle still keeps flashing.

It appears Win 10 installed a new driver called ELAN Input Device. That's what it says when I go to the device manager.

However, when I go to the settings menu>devices>mouse and touchpad>additional mouse options to the mouse properties, there is no way to configure the gestures.

I found out that I have to go to the Elantech folder in program files and run the ETDAniConf application and that brings up the gesture customization menu. However, when I run the program the option for two finger scrolling, pinch zoom, etc. are checked on, as is the default. There is no option for one finger right side scrolling like I mentioned earlier. And, as I said, the blue circle keeps flashing when idle.

My laptop is a MSI GT60 running Windows 10 upgraded from 8.1 which was updated from 8.
Any help would be greatly appreciated. To sum up, ELAN is messing up my touchpad and the pointer loading circle keeps flashing when idle... Read more

Read other answers
RELEVANCY SCORE 62.8

I bought this laptop 4 hours ago. Within 20 minutes of me setting it up, I began have alot of issues with the touchpad. I tried installing the newest drivers, troubleshooting, and all of the other stuff that has been reccomended to other people and Im still having this issues. I did abit of research, and it seems that almost everyone with a control zone touchpad is having alot of issues. Is there any way to fix it? And when will HP acknowledge the fact that this touchpad needs to be fixed, and do something about it?

A:Control Zone touchpad not working properly Hp Envy m6 n010dx

Dear Customer,Welcome and Thank you for posting your query on HP Support ForumIt looks like you are facing difficulties with the Touchpad of your NotebookWe will surely assist you with thisSteps to drain the Static charge and loading default BIOS settings to resolve the issueStep 01. Turn OFF the NotebookStep 02. Un-plug the Power/AC Adapter and also remove the Battery tooStep 03. Press and Hold the Power Button of the Notebook for a full minuteStep 04. Now let's re-insert the battery back in and plug back the Power/AC AdapterStep 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOSStep 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOSStep 07. Now let's press Esc/Escape Key. Save Changes and Exit - YesStep 08. Now please wait till the Unit loads the Windows Operating systemNow please re-install the touchpad drivers from HP Website in order to resolve the issueNote: After performing all the above shown steps if you still have the same issue that could be a hardware issue and I strongly recommend you to get the Notebook replaced as its brand new. You have a 30 days time from the bill/invoice date to get your unit replaced either from HP directly or from the point of purchase where you bought it from.Hope this helps, for any further queries reply to the post and feel free to join us again**Click the KUDOS star on left to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as... Read more

Read other 5 answers
RELEVANCY SCORE 62.8

Hello,
I am having a Dell Inspiron 5537 ci7 with Windows 8 (64-bit) running.
Occasionally the pointing device starts to malfunction (especially after high-end playing games)
 
The problem:
"When I click anywhere on a window (be it browser or windows explorer etc..), the window gets deselected. I cant browse at all.
Another browser (Chrome) specific click issue (when deselection isn't happening- The tab closes when I click on it.
Right click also does the same.. (deselects the window)
The problem is gone when I shutdown and start again - Restarting usually doesnt helps"
 
It seemed like a driver issue to me - I have installed the latest version of synaptics driver from dell (i.e. v16.3.15.3) - didnt helped.
Request support... Its really hindering my routine use

A:Dell 5537 - Touchpad/Mouse Clicks not working properly

Retyped.

Read other 3 answers
RELEVANCY SCORE 62.8

I recently updatet my Laptop (Z930-12m) to windows 10, everything is working fine so far, except the Touchpad (Synaptics).
I can't scroll any more and also the momentum setting I used before seems not to be working any longer.

So I ask myself are there any updates for the drivers planed for this? Or can I get them anywhere else?

A:Portege Z930-12M - Touchpad is not working properly after Windows 10 update

Update:
The scrolling on the touchpad works now, I just did not adjust the settings properly.
But the momentum still does not work.
Anyhow, I found a view drivers for my laptop
http://win10upgrade.toshiba.com/swup...=DE&country=AT

Read other 1 answers
RELEVANCY SCORE 61.6

As you can see there are multiple problems that have come up in this notebook. I recently reinstalled windows 10 to solve some other problems. The installation went perfect and afterward everything seemed to work fine. When my wife turned it on the blue BIOS screen came on (as it did before the installation) and I was unable to use the touchpad, mouse or arrow keys to move the selection. I rebooted and it started up fine only the keyboard did not work. I had to use the onscreen keyboard to log in. Once inside, sometimes the keyboard works and sometimes it doesn't. I've tried using the f6 to toggle the touchpad on but it didn't work. The keyboard is touch and go and now the blue screen BIOS sometimes comes up when the computer is started. Any suggestions would be appreciated. I've searched for solutions and haven't been able to find anything that works to solve these problems. I've uninstalled the drivers and rebooted for a fresh re-install of the drivers but that only temporarily fixes the problem. Thank you.

Read other answers
RELEVANCY SCORE 61.2

Hello, I have a lenovo thinkpad L450, windows 10 - 64 bit OS. Recently after a systemreset, my touchpad is not working properly. Touchpad click is not working but tap function works fine. Trackpoint option is also disabled and i'm not abloe to enable it even from BIOS settings. I have also tried installing synaptics driver, but didnt help. Any suggestion or advice would be helpful. RegardsAkilan 

Read other answers
RELEVANCY SCORE 60

My notebook is runnning Windows 10, and the touchpad has not been working well recently. I can use the touchpad to left click and select multiple items in the past, however this cannot be done now. The right click of the touchpad is not working too. I used to right click a link and select "open in new tab" in the past but now cannot. Either the left click or right click of the touchpad are not working well. I would be grateful if my problem can be fixed. Thank you!

Read other answers
RELEVANCY SCORE 60

Hello everyone, I have a Lenovo 920, and the touchpad stopped working. I went to settings to see about it, and I was expecting to see a Mouse & Touchpad setting, but all it showed was a tab for Mouse settings. It is almost like Windows 10 is no longer detecting the touchpad.Any advice? Thanks

Read other answers
RELEVANCY SCORE 59.6

I bought a Lenovo G50-80 (intel(R) Core i3-5005U, 2GHz) a few months ago. A week after buying, I noticed touchpad not working properly while charger plugged in, also it was not working while my printer?s USB cable connected. Touchpad button and finger tap working fine but, cursor hanging or moves very slow. When I unplugged the charger and printer cable touchpad working fine. But, it was not working anymore (it is also not working properly when the charger and printer?s USB cable unplugged). Usb mouse working perfect.My Laptop have installed windows 7 64bit operating system. I tried to reinstall windows 7 64bit ultimate and professional os (Not other like windows 8 or 10), I updated a latest bios and touchpad driver from Lenovo and synaptics website, But I am getting same problem.

Read other answers
RELEVANCY SCORE 59.6

Hi, I updated to Windows 10 yesterday. I thought my laptop was working OK after the update, but I've noticed that my mouse touchpad doesn't work at all after the update. I hit the F6 button to turn the touchpad off and on, and it still isn't working. Can you help? Thank you!

A:My Lenovo G50 Mouse Touchpad isn't working

Is someone going to get back to us with a fix for this problem?

Read other 8 answers
RELEVANCY SCORE 59.6

Hi, just recently and I mean just recently (second day brandnew) my Lenovo G530 laptop is not working. Out of the blue, the touchpad is not responding an i tried to update but i have the newest driver.(also did a rollback) Nothing seems to be working wih he best of my knowledge.
 

A:Solved: Lenovo TouchPad Not Working!!!

For people having this same problem on Lenovo 3000 series laptops... Solution: On older ones you press Fn + F8.... for newers models you press the mouselock button that is located on the end of your multimedia buttons on the top corner of ur keyboard...
 

Read other 1 answers
RELEVANCY SCORE 59.6

Hello,I've recently gotten a new Y720 laptop, but unfortunately I can't seem to get touchpad working. I already noticed that it wasn't working during my Windows installation, but I kinda shrugged that off and hoped that it would get working as soon as I update the drivers. Now everything is installed, but the touchpad refuses to work. Also, when I enable it there appear random clicks on my desktop without me moving anything. Is there anything I can do or should I return it?

Read other answers
RELEVANCY SCORE 59.6

The cursor / touchpad on my yoga 700 has stopped working. The cursor came and went for a couple days but starting this afternoon, has gone full time MIA.  I have tried a bunch of stuff to try to get it to work, listed below. Called lenovo tech support and they wanted me to mail it in for troubleshooting but it is my work computer and I can't have it gone for who knows how long.  Anyone have any other ideas? Thank you very much I have taken the following troubleshooting actions:Restarted multiple timesSwapped between cpunters and tablet modePress f6 to enable/disable TouchPadUpdated Synaptics drivers and restart Deleted driver and reinstalled and restarted Tried the ctrl+alt+del trick to be cursor backTried using TouchPad at login screen, no joy. All of these were unsuccessful.   Please help!!!

Read other answers
RELEVANCY SCORE 59.6

The touchpad does not allow me to move the mouse, however it does allow me to scroll. I tried reinstalling drivers but upon doing so, it said, "No Appropriate Driver to be Installed" https://pcsupport.lenovo.com/tr/en/downloads/ds103340 That is the driver I am attemping to download. Thank you for your help!

Read other answers
RELEVANCY SCORE 59.6

The touchpad is not working.
I reinstalled Touchpad drivers from Lenovo website and it didnt help. I also
installed the Synaptics latest drivers but that didnt help either.

I reinstalled Windows 7 but that didnt help. Installed Windows 8, That didnt help either.

Clicking "Mouse" on "Control panel". gives me the message " Unable to connect to Synaptics Pointing Device Driver"

I'am currently using an external mouse. I also uninstalled the external mouse, rebooted, but Touchpad didnt work.
At some point the touchpad did work for a few minutes then stops working again. I also checked the touchpad connector and its all well connected

Any ideas?
 

A:Touchpad on Lenovo G570 Not Working

Is it enabled in the BIOS?
 

Read other 1 answers
RELEVANCY SCORE 59.6

After installing the driver on touchpad, which was downloaded from the official website, the touchpad still could not work. I even tried to update the bios and the lenovo utilities drivers. But after the updating, it had no changes in the touchpad. How can the touchpad go back to the normal use? Looking forward to the assistance and solutions. Thank you very much.











Solved!
Go to Solution.

A:Lenovo Yoga 3 Pro touchpad not working again

Welcome to the forums!
 
Is the keyboard impacted as well, or just the touchpad? If you haven't already, please install the following update:
 
http://support.lenovo.com/ca/en/products/laptops-and-netbooks/yoga-series/yoga-3-pro-1370-laptop-len...

Read other 6 answers
RELEVANCY SCORE 58.8

Hello,
 
I am typing this message for a friend who is having issues with her Lenovo D570 Keyboard.
 
It was working fine this morning and actually very recently into the night. but at 9:52 PM EST, Her keyboard started to act very unusual.
 
For instance when ever she types a Key, when she pushes the "I" key, it also types out I O and P. 
This problem apparently affecting a ton of her other keys as well.  
If she tries typing anything the keys bring up the start menu, as well as other programs such as a menu that says
"Computer Only, Duplicate, Extend, Projector Only"
 
There was nothing spilt on the keyboard to make it sticky, and the keys are not stuck.
We're are very curious what could be causing this problem.
If you could help explain or give us steps to fix this problem it would be very appreciated. 
 
Thank you for your time.

A:Lenovo b570 Keyboard Not Working Properly

hi jenniby,
 
Welcome to Lenovo Community Forums!
 
I believe it is the Lenovo B570 you're saying, 
Try doing a power drain,
    Remove AC adapter and Battery, then hold down the power button for at least 15 sec. this will drain off the power from the MOBO.
 
Reconnect everything and see if that works,
Also try using an external Keyboard to test out the Windows.
 
If that did not work I suggest Calling Lenovo Technical support for Hardware Concern.
 
Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 3 answers