Over 1 million tech questions and answers.

Isass.exe System Error-object name not found

Q: Isass.exe System Error-object name not found

This popped up on a laptop computer that has not been online in seven years. Can't get rid of the dark screen and little box with this message. This is the only message that ever shows up. Re-boot over and over again and the same message recurs. I need this computer to work. Any suggestions?

Preferred Solution: Isass.exe System Error-object name not found

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Isass.exe System Error-object name not found

I'm pretty sure it's Lsass.exe (not Isass.exe), if the latter then it's an infection.

However, this can be difficult to fix. I assume the operating system is XP? Is that correct?

Are you able to boot to safe mode?

Read other 1 answers

My system started crashing about the time this new message started appearing on my computer at start up. I run it through the "search" it came up with about 5 files with variations of this. I can't figure out what to do. Can someone please help?? Thank You!!

A:Isass.exe System Error Object Not Fount

Isass.exe can be a system file or malware depending on where it is and how it's spelled. What you think may be an I can be an l (L).The best thing to do would be to run both Adaware and Spybot Search and Destroy from safe mode, updating each program before you scan and setting both to fix what they find.*AdAware SE: http://www.majorgeeks.com/download506.html*Spybot S&D: http://www.safer-networking.org/en/index.htmlFollowing that that I suggest you post a ?HijackThis? log for expert assistance with your problem.Read the pinned post in our ?HijackThis? forum, herehttp://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/ Carefully read and follow all directions explicitly.Following instructions run a log, and post it in following HJT forum, at this link. Include a brief description of your computer (ie, processor, amount of RAM, brand or motherboard, etc, and the problem you are experiencing.)http://www.bleepingcomputer.com/forums/posthjtlog.htmlUnless you are expert at editing the registry, Do not as yet attempt to fix anything by yourself using Hijack This as even what may seem to be a small mistake can render your op system inoperable.Some files when in one folder may be fine while in another may be malware. A member of our HJT Team will analyze your log, make recommendations and offer assistance.It may take a period of time to get a response to the log you posted because the members of our HJT Team ar... Read more

Read other 1 answers

hi,who can tell me how can i resolve this problem with isass.exe object name not found,when i start the computer this msg it appears on screen,how can i repair that without reinstalling the operating system? please help me!

A:isass.exe object name not found

you need to post here for this problem as it sounds like malware to me.

Read other 1 answers

I have a Compaq 2100 Laptop that is coming up with this on start up “Isass.exe - System Error Object Name Not Found” this then set’s it off in a loop of trying to boot then failing. I have tried loads of Boot fixing Cd’s with no affect.
I have no recovery CD as this is my daughters Laptop and she has lost it. Dose anyone have any ideas on how to precede? At this rate I will be putting my hand in my pocket and buying her a new Laptop!!!

A:Isass.exe - System Error Oject Name Not Found

Read other 7 answers

How do I get rid of this error message which pops up after every boot/reboot?

A:Lsass.exe -System Error-object name not found

Hello and Welcome to TSF,

You can run checkdisk.

cmd (press ok)
type: chkdsk /r (exactly the way I have it here, 1 space between k and /).
cannot lock current drive
do you want to the volume checked on next reboot (press Y and press enter on keyboard)
go ahead and reboot pc now so it can run.

Read other 1 answers

can ne1 help me with (title)

A:lsass.exe-system error x object name not found

Hello shakiz and Welcome to TSF.


lsass.exe-system error x object name not found

This is an interesting one, as "lsass.exe" has been known to be a virus in disguise.

It is also an essential Windows program too.

Having said that, can you please give us some more detailed info regarding this problem; such as,

How long has it been occurring?

When this message comes up what were you doing immediately prior to it happening?

Have you made any recent changes to your hardware/software, say in the last two weeks? and if so, what were the changes?

What Anti-Virus and Spyware Programs do you have on board?

Have you run scans with these programs recently, like in the last 24 hours?

Please post back with this info; then, we can start to help you.

Kind Regards,
Dave T.

Read other 2 answers

I am running Windows XP Service Pack 2. My computer locked up on me. I finally figured out it was the hard disk, and ran chkdsk. It seemed to have fixed the problem, but my computer does not have any users or passwords. Does anyone know how I can get into my hard disk, copy over some of registry files to replace the ones that are corrupted? The files I want to replace are: SOFTWARE, SAM, DEFAULT, SECURITY, SYSTEM. Or am I missing something bigger here? I have tried to use the unix trick of booting from a unix disk and changing my passwords, but it cannot find the accounts to change the passwords. Thanks. Any help would be appreciated.


Read other answers

We are behind a firewall using Symantec virus updates automatically pushed to the dekstops. Yesterday, PC started going down like dominoes with the error (Captial I not L) "Isass.exe System will shutdown in 60 seconds".

We've since unplugged the network cables on all affected PCs and shutdown our firewall, but we are continuing to get notifications about new infections on our LAN.

We've done a network scan and don't see any viruses on PCs that have eventually reported the error and have had to be taken off the network.

We've updated the infected PCs with XP SP2 and a bunch of Security Bulletin patches. Same Issue.

If anyone can take a look through this Hijackthis log and tell us what's happening and what steps to take, we would be extremely appreciative!

Logfile of HijackThis v1.98.2
Scan saved at 10:21:59 AM, on 12/2/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\program files\lotus\notes\ntmulti.exe
C:\Program Files\Symantec AntiVirus\SavRoam.exe
C:\Program Files\Sy... Read more

A:Isass.exe system shutdown in 60 seconds but nothing found by Symnatec.

you got msblast on this machine



Read other 2 answers

Hello,A few days ago I posted my DDS logs in the HiJackThis Forum and have been logging on for the past couple of days to see if I've received a reply to my post. No replies yet, however the instructions for the forum indicated that patience would be necessary. Since the day I've posted my logs, I've done nothing extra on my computer except log on daily to this site to see if my post has been replied to. Today (5/5/09), when I turned on my computer to the following message appeared "Isass.exe - System Error Object name not found". This message appeared before the password login screen. I tried to click "OK" but the computer did not respond. I had to resort to manually shutting off the computer and turning it back on again. This time the computer proceeded to the password log in screen. My greatest fear each time I turn on this computer is that I wont be able to make it to this site to get my reply from my initial posting because the invaders will have taken over and will have completely shut me down and out.Well if anyone can keep me at least able to log on and get to this site...this will be greatly appreciated.I'm not a techy so hopefully this is enough information for helpMy ComputerMS Windows XP Home EditionInstalled: 4/7/04 (Best Buy -- Installed)Motherboard ASUSeK Computer Inc.Processor AMD Athlon ™ XP 3200+/Socket A/2191/200 mhzThanks for your assistance.

A:Isass.exe - System Error

go here; check this out : http://www.softwarepatch.com/tips/isass.htmllet us know if this helpsranger72

Read other 3 answers

Please help...…I’m having trouble with my Dell Dimension 4400, windows XP computer. My computer will not boot up,I get a black screen with an error that says "isass.exe – System error (object name not found). I cannot get to Safe Mode either. I get to the menu for Safe Mode,but then when I click Safe Mode,before the screen shows up I get the exact same error and the pc reboots. When trying to start with the last known configuration…I get the same error. I tried to repair windows with my OS disk,but again, got the same error except now, after the windows boot up bar I get a screen that says setup is being started and then I get the Isass.exe error. Please note that the week prior to the error message, I was getting a message reading, “your PC is running low in vitual memory”. Your help with this matter is much appreciated. Thank you!!

A:Isass.exe - system error..please help!!!

A repair installation may be a good idea. Do you have an XP CD that matches your version of XP and service pack level?

Read other 1 answers

My wife's Gateway Laptop came up with the topic error last night. IT has XP Home edition SP3 on it. All MS patches were on the machine. Last thing done to it was to run a fulld Mcafee scan, which turned up around 7 trojans, that were quarantined. Machine was turned off. Now it is stuck in dreaded reboot mode because of this error. I probably do not have a boot disk. I cannot go back to the last good recovery point. Any suggestions from anyone?
If it is a sasser virus, I can't see how it got it since all MS patches were downloaded and installed when they came out, and Mcafee get updated religiously.
And of course since its her laptop, I'm on the couch!

A:Isass.exe System Error

Try starting up tapping F8 key?

When the Screen comes up select "Last known Good Start up Settings"

Post back after.

Read other 4 answers

I am getting a system error message on boot up

"when trying to update a password this return satus indicates that the value provided as the current password is not correct" and that's as far as I can get does anyone have any suggestions

A:system error isass.exe in XP

Read other 8 answers

Hi, I've been searching solution for this issue over the forum but none of them sounds like mine. Today, I uninstalled a driver for my wireless adapter and it asked me to reboot which I did. Then the screen just hangs or "black screen" which I'm unable to log in.
So I grabbed the XP CD and Repaired the the drive (not the recovery one) and there is box come up Isass.exe System Error An invalid parameter was passed to a service or function. I clicked Ok and it restarted and the same message popped up. I tried to log in with Safe Mode but no dice. I tried to run the recovery mode from the XP CD. I typed 1 when "which Windows installation would you like to log onto? Another blue screen pop up with A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL.
Anybody help? This is urgent and I don't want to format my computer because I have bunch of important datas there. Thank you!

Read other answers

Hi guys,
I have used this forum once before under the HJT threads and found it excellent.
Well here goes. The son-in-law of a work colleague has given me his sick puter. It will not boot into Windows XP Home, the OS that is resident on it.
At switch on it completes the POST, then starts to load Windows. It displays the Windows XP logo page, blanks for about 20 seconds and then displays a Windows Error Banner.

Title Bar of Banner has ----- Isass.exe - System Error
Error Message reads ------- Insufficient system resources exist to complete the API.
It then warm reboots automatically and starts the whole process again - continuously.

As far as I have been told regarding the history of this box is that :-

1. Firstly the user was suddenly confronted with a password logon box to get into Windows - not the usual graphical User buttons to get into accounts. This was a black screen with a box asking for a password. He suspected his child had inadvertantly imposed a password login somehow, but didn't know for sure and certainly didn't know the password.
2. He then took it to a shop, the outcome of which then produced this problem above - obviously worse than before.

I personally have not seen anything to do with Item 1 above, only the continued error message and rebooting. Have advised going back to the shop but the user was not keen.

I have read the pre-post notes but not being able to get into any stable form of Windows, I am unable to... Read more

Read other answers

Geez, get one computer straight, then got another one with a problem!

isass.exe - System Error - An invalid parameter was passed to a Service or function......

Okay, everything I am reading online is saying I need to use the original disc to boot up, which I don't have. All I have is the Operating System CD (Microsoft Windows XP Professional SErvice Pack 2) and the HP Restore Plus CD.

So my question is this? Is the computer dead?

Is there anything I can do to get this computer back up?

It runs Windows XP Professional. It was originally a work computer that was sold to me by the company. I don't have the original CD's that came with it.

I'm gonna keep looking. I may even call and see if I can get the original CD since I did buy the PC.

But any help you can give would be appreciated.

By the way, I can't get anything except the little box that says isass.exe - System Error An invalid parameter was passed to a service or function. Everytime I click OK, it reboots.



Read other answers

guys! i've reboot my pc coz mine shown 'NTLDR is missing. Press Ctrl-Alt-Del to restart'...after repaired it using my XP cd..it can't continue Installing Windows thus showed 'Isass.exe - System Error > An invalid parameter was passed to a service or function.'. Several minutes later 'Fatal error' came up..saying that setup had problems 1) registering the following OLE control DLL > C:\WINDOWS\System32\initpki.dll 2) The signature for Windows XP Home Edition Upgrade is invalid. The error code is 800b0001. Unknown trust provider. 3) Setup failed to install the product catalogs. This is a fatal error. The setup log files should contain more information.

help me guys..i juz want my pc go back to normal, use'able again..plzz!

A:Isass.exe - System Error --- Help!

Try another hard drive, then test your memory

Read other 3 answers

Please help...…I’m having trouble with my Dell Dimension 4400, windows XP computer. My computer will not boot up,I get a black screen with an error that says "isass.exe – System error (object name not found). I cannot get to Safe Mode either. I get to the menu for Safe Mode,but then when I click Safe Mode,before the screen shows up I get the exact same error and the pc reboots. When trying to start with the last known configuration…I get the same error. I tried to repair windows with my OS disk,but again, got the same error except now, after the windows boot up bar I get a screen that says setup is being started and then I get the Isass.exe error. Please note that the week prior to the error message, I was getting a message reading, “your PC is running low in vitual memory”. Your help with this matter is much appreciated. I start school next month and need my PC working again. I can’t afford a new PC at this time. Thank you!!

Read other answers

Had a power surge this afternoon, after the surge I keep getting this error when trying to bootup ( it just keeps looping round and round ), it allso says something about wrong pasword, I do not use a pass word to boot.
I have run a boot system disk and run reg edit, no such string in the register

TIA for any help to get around this one

A:Isass.exe System error on bootup

Read other 9 answers


My nephew has a Dell Latitude with Windows XP. He was trying to install taskam software for drivers (no brand name). It was for a guitar interface. Now his laptop just keeps rebooting after showing this message: When trying to update a password, this return status indicates thst the value provided as the current password isnot correct"

I have tried F2 in setup, F5 (or F6) to get in and while I can get into the set up screens and reboot screens nothing I have tried will work. I tried safe mode, sfemode with command prompt, last known good configuration and nothing. I know it's an old laptop, but he is an aspiring musician and has some of his original songs recorded on it.

Is there any way to get this thing to work again? He doesn't have any discs for it as he received it second hand.

Thank you ANY help you can provide.

A:Solved: ISASS.EXE - System Error

Read other 14 answers

Greetings…I’m having a serious issue with my Dell Dimension 4400, windows XP. I logged this afternoon to my PC. My computer will not boot up,I get a black screen with an error that says "isass.exe – System error (object name not found). I tried to boot up on safe mode and last known configuration with no luck. it always ends up at the lsass.exe error screen. Your help with this matter is much appreciated. Thank you!!

A:Solved: Isass.exe system error


Please do not create duplicate threads. Your duplicate thread has been removed.
One thread for an issue. Thank you.

If you feel your thread would be better addressed in a different forum, please use the Report link at the bottom of your post and request your thread be moved to that forum.

Thank you

Read other 1 answers

Few days ago I started getting this message when my Windows XP is loading. Right after the Windows XP screen, a box pops up with "Isass.exe system error - object not found" message. When I click on OK, the system restarts and it goes over and over. The same happens in Safe Mode. I found out it is a virus or a worm and there is a way to fix it, by installing a second copy of Windows from a CD, starting it and cleaning up the original installation. For me the problem is that my HD is almost full (has less than 6% free space) and it's not enough to do a second installation.
What I thought of doing was to install a second HD, install Windows XP on it and boot the pc from that dirve to clean up the original operating system. The question I have is whether this can work. The second HD will be set up as slave and I am not sure if the system can boot from a slave if it detects original installation on master HD.
If it wasn't for some files that I really need from my pc I would probably just reformat my C drive and reinstall Windows.
Can anyone give me any advice or suggestions? I'll relly appreciate it.

A:Solved: Isass.exe system error

Read other 9 answers

from last 2 days when i start my computer after open the desktop a message display on screen (lsass.exe error) when i click ok a new menu is open (object name not found) when i click ok the system is restart i also scan my pc through quickheal licence antivirus how can i remove it


Read other answers

I don't know what happened, but somehow my sister downloaded spyware called "System Error Fixer" and now random pop-ups appear every time I open my Internet Explorer and Firefox just give me an error. The computer is running slower, especially when Internet Explorer is up, and sometimes error messages pop up. When I was trying to fix the problems, I also noticed (through ZoneAlarm) that isass.exe was trying to reach the internet. So now I think this computer is thorougly messed up.

I attached ActiveScan.txt from pandasecurity and extra.txt from dds

here's my log:

Deckard's System Scanner v20071014.68
Run by Emily on 2008-04-16 21:27:35
Computer is in Normal Mode.

-- System Restore --------------------------------------------------------------

-- Last 5 Restore Point(s) --
28: 2008-04-17 04:22:56 UTC - RP43 - Deckard's System Scanner Restore Point
27: 2008-04-15 03:42:16 UTC - RP42 - Last known good configuration
26: 2008-04-15 03:42:10 UTC - RP41 - Installed iTunes
25: 2008-04-15 03:42:09 UTC - RP40 - Installed Java(TM) 6 Update 5
24: 2008-04-15 03:42:09 UTC - RP39 - System Checkpoint

-- First Restore Point --
1: 2008-04-15 03:42:04 UTC - RP16 - Installed Palm

Backed up registry hives.
Performed disk cleanup.

-- HijackThis (run as Emily.exe) -----------------------------------------------

Logfile of Trend Micro HijackThis v2.0.2
Scan sa... Read more

A:System Error Fixer, antispywaresuite.com, isass.exe, etc

Hello and Welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem as soon as possible.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please be patient with me during this time.

Read other 9 answers

I tried to boot up my laptop - Compaq nx9010 - which has XP operating system loaded and while trying to start up windows - I got the following error message:

Isass.exec system error - The sepcified Domain did not exist

If I then clicked on OK, the system rebooted.

I have tried starting the system in safe mode - but have not been successful.

Please can some one tell me if this can be corrected and how.

Read other answers

I had to reformat my Dell Inspiron 1504 laptop with winxp due to a blue screen. I inserted the windows operating system disk from Dell and started the process. First problem was I tried to do a repair from the disk, but it did not show drive C:. I went to do a quick format and it said it was unable to reformat. I did the slow format and that was successful.
However, during the first minutes of reinstall the Windows operating system, I get a box that says "error, and something about "Isass.exe" and the computer will not continue to reinstall windows. i tried to do it all over again and same problem. I deleted the install and started from scratch and same problem with the error.
I discovered I could see the drive under a "repair" attempt, but it wanted an admin password. I have never assigned a password to any admin items.
Any ideas what this might be. The operating system isnt installed yet and Im stuck.

A:Solved: isass.exe error when reinstalling winxp operating system

Ended up just replacing the hardrive. I also found the two screws holding the hardrive in place were missing. So, the hardive was moving in and out of the laptop case during all my work. I secured the drive, and re-tried everything, but the drive was toast.
Thanks for reading though and keep an eye on those screws!

Read other 1 answers

win xp home intel 4 2.66 processor
nvidea geforce fx 5200 128 mb 512 ram
dell 4600
sound blaster live
direct x 9.0c no problems found

I have a digital blue movie creator 2.0

When I connect the camera it is supposed to download and convert the movies.
It says Problem converting avi file
Direct show error 130 object or name not found
have reinstalled software,directx,and codecs
any suggestions

A:Solved: direct show error 130 object or name not found

Try this Windows XP Video Decoder Checkup Utility http://www.microsoft.com/downloads/...ac-0ab6-4990-943d-627e6ade9fcb&DisplayLang=en

Read other 1 answers

I am reinstalling Windows XP on my Dell Inspiron 1501. When the reboot started I get the Isass.exe - System Error. An invalid parameter was passed to a service or function. Then the reboot starts over. I read that it may be infected with a virus. Can anyone help.


Read other answers

My outlook all the sudden gives me an error when I try and send mail saying "Failed to complete process. Object cannot be found." I have tried re installing and tons of other stuff. Any Ideas anyone?

A:Outlook 2007 Cannot Send Messeges, recieve error: Object Cannot be Found.

Try deleting your existing mail profile and creating a brand new one. It wouldn't hurt to back up your .pst file prior to messing around with anything. The .pst file contains all your existing mail and contacts and may be hidden so make sure to enable searching of hidden files in Windows.

Control Panel >> Mail >> Show Profiles.


Read other 1 answers

I am not an expert but I have built several databases over the years. This time I started with a template from ms access 2010 called projects. I had no problem changing it all up the way I wanted until last Friday and now I've been searching for a fix ever since. One form that I built just like all the others is giving me this error: The object does not contain automation object 'ActiveControl' you tried to run a VB procedure to set a property or a method for an object. However, the component doesn't make the property or method available for Automation operations. Check the components documentation for information on the properties or methods it makes available for automation operations.

Other forms with this same code in it work just fine. This one does not and any others that I try to build now do not.

The code is very simple. It's a combobox asking to search for and find a record. Even using the combobox wizard which auto creates this code will not work: After Update embedded macro where condition: ="[ID] = " & Str(Nz(Screen.ActiveControl,0))

The other forms have much larger code but receive the same error message. Things I've tried - debugged, made the location trusted, created new database and recreated just one form/table to be sure there is nothing wrong with my current database, found a list of other ways to write the same code (sort of)="[ID]=" & Str([ID])
Form![Information]![ID]=Str(Reports![... Read more

Read other answers

Hello, I have a friend who has a problem with his laptop. It has no floppy drives, has a DVD RW drive, and plenty of storage space.
Enough background; the problem:
Running XP Home edition SP1 his computer will not boot far enough for one to log on, Any safe mode or other wise. The error message is that lsass.exe System Error: "Object not found." He can click on OK or the X and the system reboots to run through the loop again. I've read that an executable has to be run to enable a service needed... however I can't run that from the command prompt offered on the recovery console of the XP Home cd. (someone else's CD since his version is OEM and there is no cd that he has). So I need to know how to fix this problem (preferrably without reformatting since I've heard that people that have done that run into worse problems). A side note I've installed XP again in a separate folder (same drive). Please help!

A:lsass.exe "object not found" error; reboot

Read other 11 answers


I am using Windows Vista.
Office 2010 purchased.
I can not recall my emails. The message I'm getting is "The attempted operation failed. An object could not be found".

Hosting Exchange and I checked with the hosting co. who says they support the functionality. Quote: This function is a default feature from Microsoft. All features that Microsoft has enabled by default are enabled by us, the default settings aren't changed
by us."

How to fix it?

Thank you in advance for any information :)


Read other answers

I am operating with windows xp. Every time I start my computer I get this error. I hit the ok and the computer works as though nothing has happened. It doesn't stop me from doing anything that I've noticed yet. I've recently installed Microsoft Office and
my email was switched from Outlook Express to Microsoft
Outlook. I found this error on the searches but it was for the
windows 98 version. I tried the resolution that was suggested
with the start, run <B> ms config </B>, ok, start up tab but I
received an error for this.
I hope you can help.

A:[Resolved] wj view error unable to locate system class/java/object

Read other 16 answers

I have a vbscript (test.vbs), which comparing the files in the different folders in the same system(windows7 OS).
I tried to execute this script and receiving the error message as below:
           'Runtime Error 429 : ActiveX Component Can't Create Object'
After received this message, I tried the below steps:
        1. execute 'wscript -regserver' command in command prompt, which went fine.
        2. execute 'regsvr32 scrrun.dll' command in command prompt, which went fine.
        3. Re-execute the vb script (test.vbs), receiving the same error message(Runtime error  429).
Please advise on this.

A:Receiving message 'Runtime Error 429 : ActiveX Component Can't Create Object' in windows7 system

Two points:
The command need to be run from admin CMD prompt, as explained in my last post.
There are two commands mentioned.Ramesh Srinivasan | The Winhelponline Blog
Microsoft MVP, Windows Desktop Experience

Read other 14 answers

Running Windows 8.1 PRO RTM x64 upgraded from Win 8 PRO. Updates to 8.1 as of 17 October installed
Event viewer still shows newly triggered Error(s) CAPI2 event id 513.
I can trigger this error by manually creating a restore point invoking VSS.
The VSS System Writer is listed and is error free.
Log Name:      Application
Source:        Microsoft-Windows-CAPI2
Date:          17/10/2013 20:32:19
Event ID:      513
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Machine -Name
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
System Error:
Access is denied.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
    <EventID Qualifiers="0">513</EventID>
    <Version>0</Versio... Read more

A:Error source CAPI2 id 513 - Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object

Seems we finally have a solution thanks to user szz743 in
the other forum
Here goes:

"Microsoft Link-Layer Discovery Protocol" binary is \Windows\system32\DRIVERS\mslldp.sys
Its config registry key is HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MsLldp
During backup a VSS process running under NETWORK_SERVICE account calls cryptcatsvc!CSystemWriter::AddLegacyDriverFiles(), which enumerates all the drivers and tries opening each one of them. , The function fails on MSLLDP driver with "Access Denied"
Turned out it fails because MSLLDP driver's security permissions do not allow NETWORK_SERVICE to access the driver.
The binary security descriptor for the driver is located here:
It should be modified, I used SC.EXE and Sysinternals' ACCESSCHK.EXE to fix it.
The original security descriptor looked like below:
>accesschk.exe -c mslldp
  RW BUILTIN\Administrators
  RW S-1-5-32-549       <- these are server operators
No service account is allowed to access MSLLDP driver
The security descriptor for the drivers that were processed successfully looked this way:
>accesschk.exe -c mup
  RW BUILTIN\Administrators
  R  NT AUTH... Read more

Read other 21 answers

So I am trying to run a three of different programs for modding a game called Fable The Lost Chapters. Every time I try to run the darn programs I get the following error, followed by a string of code I don't understand that is unique to each program:

"object reference not set to an instance of an object. when i try to run a program"
The strange thing is I've never gotten this error before and these programs were all made by different people, for my OS, and no other people that I know of have encountered this particular error which means the problem is on my end. The people said I needed .net 3.5, which after some googling I learned I do.

So I really want to get this worked out so I can use the programs, and I'd appreciate any help. Thanks!

P.S. Please note that I have no experience with programming whatsoever.

A:"object reference not set to an instance of an object" error when running program

This looks like a programming bug with the mods, so I suggest getting the latest patches for the game or contacting the authors of the programs with details of the error message to get it fixed.

Read other 1 answers

weird issue. Guy has outlook 2k3, office 2000, as does everyone else in the building. He, and only he, gets an error when he receives multiple attachments; when he trys to open them, he gets "The Object Could Not Be Found", and an 'ok' button. However, when I had him forward the email to me, it worked fine, and when I saved it to his desktop, I can also then view the attachments.

Ideas, anyone?



A:Solved: object not found

found a big enough hammer, solved.

Read other 1 answers

I was going through my boyfriend's desktop IE addons, removing the viruses. Well. When I got to one of them in the registry, I deleted the entire folder instead of the single key. The registry on the system is now corrupt. When booting the system, the mouse appears on a black background, followed by a pop up box that says "Object not found, Lsass.exe". OK is the only option. Click it, reboot.

"Xp Recovery Council!" I thought. I went through all the steps on the disc, it reloaded all of the windows files. Now when you go to the setup screen that is supposted to install the files and drivers and whatnot, it gives that same error box ontop of the screen. Click OK and it reboots. Leave it there, nothing happens.

I even tried using the command prompt from the XP Pro disc to copy a new instance of the file into the c:\windows\system32 directory. The copy went through, but no change. I'm out of ideas and I really don't want to reformat. Is there anyway I can edit the registry from a C prompt to reinclude this file? Some other quickfix?


**EDIT** Guides for editing the Registry from a command prompt are available here http://www.computerhope.com/reg.htm
I don't know if this is going to work. I saved all instances of lsass.exe keys from this system, copied them to a CD, and I'm going to manually import them.

A:Lsass.exe Object not found

Read other 6 answers

Hi all, I was uploading an XP image to the RIS server (domain imaging similar to ghost), and lost power. When I turned on the compute again, the OS boots but is haulted and the following dialog appears; isass.exe - System Error Object Name not found.

Google and microsoft only give me that this is the Sasser worm, but this is not the case here. I am not sure if slaveing the HDD and replacing the isass.exe will do anything. I could really recreate the image, and waist many more hours, but would rather not.

If I can get into DOS, I can boot to the second OS after I modify boot.ini, trying to find a boot floppy.
Safe mode does not work.
Last known good config does not work.

I can get into the recovery console, but other than fixboot, I am not sure what to do.

A:lsass.exe - Object Name Not Found

"lsass.exe" is the Local Security Authentication Server. It verifies the validity of user logons to your PC/Server. It generates the process responsible for authenticating users for the Winlogon service. This process is performed by using authentication packages such as the default Msgina.dll. If authentication is successful, Lsass generates the user's access token, which is used to launch the initial shell. Other processes that the user initiates inherit this token. Like a virus which as you posted is not the case. There is no DOS in XP. You can use the Recovery Console if you have it installed or have a WinXP CD.

edit: oops, I see you have gotton to the RC. Did you run the fix MBR command?

Read other 2 answers

When doing adaware it came up with virtumonde. Running spybot afteerwards didn't show anything.
Here is my Hijackthis log:Logfile of HijackThis v1.99.1
Scan saved at 2:27:15 PM, on 4/5/06
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v5.00 SP2 (5.00.3314.2100)

Running processes:

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://desktop.presario.net/scripts/redirectors/presario/deskredir.dll?s=consumer&LC=0409&c=1c00
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://msn.com/
O2 - BHO: (no name) - {F2FA09FB-EE7A-46d8-9145-A1EEF7850052} - C:\WINDOWS\SYSTEM\FCCDC.DLL
O2 - BHO: Info... Read more

A:Virtumonde object found

Read other 16 answers

4/19/09 8:50pmRunning Windows XP Home Media Edition on a Dell PCOkay...so earlier I was online. I checked my email, was going through an online tutorial & also downloaded a new cd from hear-it-first.net. I have a feeling the latter is the culprit although I have used it before with zero problems. As I was waiting for the download to complete the computer popped up an AVG Alert stating I have 4 trojans & asked if I wanted to remove them. I clicked Remove & within seconds the entire computer shut down by itself.When I rebooted I kept on getting an error telling me the computer would automatically shut down in 60 seconds with a second-timer counting down to such. I chose to shut down manually by pressing the power button for 8 seconds (for fear of allowing the 60 second timer to cause the shutdown). Evertime since, when I have rebooted, I continue to receive the same error message as a wmic.exe - Application Error that states "The instruction at "0x00660671" referenced memory at "0x00660671". The memory could not be "written". Click on OK to terminate the program. Click Cancel to debug the program".No matter which I choose, the Error Message goes away & all thats left is my desktop-background picture with NO start bar, start menu, no desktop icons, no taskbar, clock..nothing. I cannot type anything like CTRL+ALT+DELETE, right click..NOTHING. After restarting 20 to 30 times, the timer thing has stopped but still no access t... Read more

Read other answers

My computer starts and restarts trying to log on? Is this a virus? How can I fix it?

A:Isass.exe system 32 Status code 1073741819

Hello and Welcome to TSF

It may well be.......can you boot into Safe Mode? Last Known Good Configuration?

Your title, is this the error you receive?

Read other 1 answers

I am using Outlook 2003. I have four PST folders that I am unable to delete. How can I find the file name and location that is being searched. None of the folders show up in "Data File Management".

A:Outlook 2003 - Object could not be found

They are generally stored in a hidden folder in your local profile. C:\Documents and Settings\username\Local Settings\Application Data\Microsoft\Outlook

Read other 1 answers

Hello, everyone it has been a long time. Well I installed windows 7 professional 64...from Vista home premium 64. It was all good until the first windows update and this message pops up on the screen after shutting down and restarting. ext_framebufffer-object extension not found....what information do you need from me? please and thank you.

Read other answers

I'm having the same issue. My scan logs are below.

Found one object (Tootkit.TDSS) in system32\tdlrm.dll (now removed)

Malwarebytes' Anti-Malware 1.41
Database version: 3160
Windows 5.1.2600 Service Pack 2

11/13/2009 1:46:10 PM
mbam-log-2009-11-13 (13-46-10).txt

Scan type: Full Scan (C:\|)
Objects scanned: 371657
Time elapsed: 2 hour(s), 24 minute(s), 4 second(s)

Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 0
Registry Values Infected: 0
Registry Data Items Infected: 0
Folders Infected: 0
Files Infected: 1

Memory Processes Infected:
(No malicious items detected)

Memory Modules Infected:
(No malicious items detected)

Registry Keys Infected:
(No malicious items detected)

Registry Values Infected:
(No malicious items detected)

Registry Data Items Infected:
(No malicious items detected)

Folders Infected:
(No malicious items detected)

Files Infected:
C:\WINDOWS\system32\tdlrm.dll (Rootkit.TDSS) -> Quarantined and deleted successfully.

A:Found one object (Tootkit.TDSS)

Hi Cronos6939,You have a rootkit infection. The best way to clean your computer is found in our advanced HJT forum. Please follow this guide from step (6). Post a HJT log to the HJT forum and a Team member will be along to help you as soon as possible. You may wish to post a link back to this topic to see what was discussed thus far. If you need any help with the guide, please let me know.

Read other 1 answers

I've got a computer on a corporate network that is getting an error when trying to send/recieve. I get "reported error (0x8004010F): the operating failed. An object cannot be found". The problem is isolated to just this one computer. It is new and is running windows 7. No other version of office has been installed. I tried adding a DNS A entry for autodiscovery.ourdomain.com but it didn't help. I've also tried re-discovering the settings for the account using the automatic account thing. The account can send and recieve mail, but the calander doesn't update and apparently some of the contacts are missing. Because it's an isolated incident and other machines running office 2010 are working, it makes me think that it's a client side problem, not server side. Would it be a good idea to try reinstalling office? or is there a better solution?

A:outlook 2010 'object can't be found'


Read other 1 answers


I am using MS Outlook 2003 on XP Pro. I have deleted a ton of e-mail and moved a bunch of folders to a new PST file. I am now trying to compact my Outlook.pst file. When I click the Advanced tab after right clicking Personal Folders and Properties, I get the message "The operation failed. An object could not be found." .

I was going to simply create a new Outlook.pst file and then copy back my e-mails, but I am not able to do this because the registry seems to remember all my Outlook settings, including all folders and other pst files open.

Question 1: How can I address my "Object could not be found." error?

Question 2: For plan B, if I want to create a new Outlook.pst file, what registry settings do I delete so Outlook thinks I am creating Outlook for the first time under my user id? (I guess it is probably in HKEY_CURRENT_USER ??

Thanks for your help.

By the way, I see no value in paying $129 for an Outlook pst repair tool when I don't even know if it will work, you know what I mean?

-- Urwethe


A:Outlook 2003-An object could not be found

Have you tried these instructions?

Read other 2 answers