Over 1 million tech questions and answers.

Thinkpad 770 starts/stops on its own

Q: Thinkpad 770 starts/stops on its own

My IBM Thinkpad 770 has started to power on......and shut down...on its own. Would the internal power supply unit by the issue? Or may it be just the on/off switch going bad? If anybody has experienced this before, I'd appreciate you fix info! Thanks!

RELEVANCY SCORE 200
Preferred Solution: Thinkpad 770 starts/stops on its own

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Thinkpad 770 starts/stops on its own

I don't see how it would from OFF, but if you have the notebook on Standby or Hibernate, then yeah its possible.

Read other 1 answers
RELEVANCY SCORE 74.4

Hi guys, I've got a Thinkpad S1 Yoga 8GB i5 with a standard HDD 500GB and what I've notice is:one barely notices that the HDD is spinning when starting up or when left idle after booting.I can move the laptop around and the HDD is always as quiet. I bought another Thinkpad S1 Yoga 4GB i3 with the same standard HDD 500GB and I'm noticing the following differences, so wondering if there's some kind of a problem with that hard drive?As soon as you power it up the HDD starts spinning and it's quite loud (compared to the laptop above, ie, it's not really loud as such, but compared to my 1st one you can definately notice that it's spinning whereas the other one is almost always quiet).It keeps continuously spinning once it's booted up, even when idle (and even though the task manager and resource monitor doesn't indicate anything using the disk, it's reported as 0% usage a lot of times)then when I move the laptop the most minimum, the HDD stops spinning and then starts again, so if I'm using it in on the move, you can notice that the HDD is continuously stopping and then starting, which seems quite weird to me. I had never noticed that before. I've tried Win 7 pro, Win 8.1 pro and Win 10 pro and it's happening in all of them. The Lenovo diagnostics for that HDD don't report any problem either.... Any idea if the 2nd HDD is behaving correctly? or anything I could change to make it work like my 1st laptop? Thank you!

Read other answers
RELEVANCY SCORE 73.6

The machine stops at the ThinkPad screen. I have replaced the RAM but no luck. I have not the removed the CMOS battery. Any clue what my next step should be?













Solved!

Go to Solution.

A:T400 starts ThinkPad screen then stops - 6475

It was a problem with one USB port. https://forums.lenovo.com/t5/ThinkPad-L-R-and-SL-series/ThinkPad-hangs-on-boot-stuck-at-Thinkpad-scr...

Read other 1 answers
RELEVANCY SCORE 69.6

A friend of my wife that works with her called and said her computer won't turn on, I looked and this is what it is doing.
You turn it on and the green light on the tower comes on and you can hear it starting up the green light on the monitor is on the key board lite is not. nothing ever comes up on the screen because you can listen to it and it starts then I think before it can really do anytning it sounds light it shuts itself off, then right away it starts up, then shuts down, then you can hear it start, then you can hear it shut itself down, you can hear it doing this and will keep doing it till you shut it down by the tower, could a cd being stuck in the cd unit make it do that or any idea's?? pleae help this lady needs it for her business, Thanks

Also if it makes a difference--you can get I think it is a white box with red trim on it you can get it on the monitor screen and it says something like saving power 10,9,8,7,6,5,4,3,and counts down and then goes to sleep
 

A:windows XP home compter starts then stops,starts,stops PLEASE HELP I use it for work

Read other 16 answers
RELEVANCY SCORE 56.8

Hello

Just switched of pc,Switched it back on and I get a page with,safe mode etc and to choose a setting.

Which ever setting I pick the computer goes to the widows xp window then goes back to the black screen then to the xp startup screen again.It does this all the time.

It was all working well until switching off.

I am on laptop now as unable to access pc.

Any ideas please.

Many thanks
 

A:Computer stops,starts,stops,

Hi try.
Repair Master Boot Record.
http://support.microsoft.com/kb/314503/en-us

Boot from CD
When prompted press [R]
Choose Windows installation [typically by pressing [1]
When prompted for a password.
Press Return [Enter]
Type
bootcfg /list
Enter.
Then type
bootcfg /rebuild
Enter
 

Read other 2 answers
RELEVANCY SCORE 52.8

Hi, Ive had my laptop (hp pavillion g6) for almost 5 years now and have never had a major issue. Recently, when using my laptop (just for tasks such as browsing the web and word processing) the fan whirs for a few seconds then stops for a few seconds, then whirs then stops constantly. It is becoming quite irritating! This happens both unplugged and plugged in and in various locations. I wondered if anyone had any ideas on why this may be and a way to either prevent it or see if the fan is broken? Thanks! 

Read other answers
RELEVANCY SCORE 52.8

Replaced motherboard had system working with conflicts.Now with power on cpu fan spins a half a turn then stops?? Its a pb 233 with 32 ram win 98. Does the power flow through the memory chips prior to powering the cpu??
 

A:cpu fan starts then stops!

Shouldn't happen. I'd first make sure it's securely plugged in, look for any frayed wiring to it, not a lot of debris building up around it, and then I'd be looking to replace it pronto!
 

Read other 3 answers
RELEVANCY SCORE 52.8

I just bought a new mobo, processor and ram for my PC, kept the PSU, DVD, Video card and HDD.

After replacing everything, I started it up and got the failure no bootable system found. Since I replaced so much, I thought it possible this could happen but I planned ahead to reinstall the OS anyway.

I put in the windows disk, installed windows, restarted and booted into windows. Put the mobo driver CD in, ran the multi-driver installer, installed all the drivers and restarted and got the no boot disk error again.

Went into BIOS, made sure HDD was detected and the primary boot device. Everything A-OK. Then I restarted and now it starts and within 3 seconds powers down. Holds about 5 seconds then tries to start again, but powers down after 3 seconds. It did this about 4-5 times before I shut it down.

Not really sure where to go from here. Originally I had 3 HDDs all hooked up, so I took all them off and only left the main OS and DVD drive, so everything but the core hardware is installed.

A:PC starts, stops, starts, stops, etc...

I've made some headway. After posting this, I took about an hour break and came back, hit the power button and booted right up. Did some more installs, restarted a few times, good to go.

Then I started hooking devices back up. I had 2 more HDD's, one SATA and one IDE. Sata worked fine, but then when i hooked up the IDE I get the boot failure error again. HDD boot order is correct, but still nothing. It's the only IDE component I have but never seems to work.

Also, after I started trying to hook it up I got the power on/off again. Sometimes it never starts, some times it powers up/down once or twice then boots on the subsiquent one. Seems to work fine when it's finally up though. I don't think it's a power issue since I can keep the IDE HD powered up, I just can't connect the cable, but it would seem to be.

Read other 3 answers
RELEVANCY SCORE 52.4

Hi Folks,

My daughter's Dell computer has run fine up until recently. When she starts her computer, everything starts up normally, but then all the icons on the desktop vanish, only to reappear 10 - 15 seconds later. This continues to occur for about 5-8 minutes, and then they just disappear altogther. I can make them reappear at that point by using the Task Manage run command. When I open Task Manager and watch the processes, explorer.exe disappears and reappears (in concert with the icons of course). Programs run once opened, but the desktop continues to disappear and reappear.

She was running for a period of time without virus software (I know, I know, what was she thinking). I have loaded Norton Anti-Virus, updated virus definitions and scanned her machine (22 viruses found and quarantined), but the intermittent explorer.exe thing is still there.

Any suggestions prior to me just wiping the disk clean and reloading Windows? Thanks

A:explorer.exe stops and starts

Hello and Welcome to TSF

The security team can help you with those. You are probably still infected. We cannot assist you with this issue here in the Microsoft Support Forum.

Please read this sticky: http://www.techsupportforum.com/f112...ed-203704.html

If you cannot complete any of the 5 steps for whatever reason, just continue on with the next one until they are all completed, and post your logs in The HJT Help Forum; where an Analyst will assist you. However, it is very important to make mention of any of the steps that you were not able to complete.

After you?ve posted your logs, please be patient, as the Security Team Analysts are very busy.

Read other 2 answers
RELEVANCY SCORE 52.4

I am experiencing a constant and most annoying issue with my new computer with a new Ultimate x64 Vista install.

The thing just "Hangs." I can be going along, often in a browser, either IE7, now 8 and Firefox, or in other programs and such, and the thing just stops. The sidebar CPU meters will be slowed and the graph drops to the bottom, the Network Meter activity drops to the bottom too. Often the background stops but not always and the same for the second hand on the clock. The circular Aero spins and the windows are unresponsive, often the window is reported as "Not Responding" and if something does respond to a mouse click only the button moves but any corresponding program action doesn't happen.

The thing will then just sit there like this for half a minute, a minute, sometimes a minute and a half, and then suddenly eveything starts running again and zooms right along. Till the next time which could be the next time I click on something or a few minures later, or longer or shorter.

I am coming to my wits end. I am almost beginning to believe the Mac guy on the commercial.

I have downloaded and run the System Info program.

Can someone please help?
Thanx,

A:Vista Starts & stops

Have you scanned your computer for viruses and spyware.

Read other 12 answers
RELEVANCY SCORE 52.4

Window xp Pro when on any internet site videos stop and start, how can I fix?

A:Video stops and starts

This is usually caused by a slow internet connection. What are your computer specs? Right click MY Computer/Properties and report the Processor speed, and the RAM (memory) installed. Then open My Computer right click the C: drive/Properties and report the amount of Free Space.
Now go to speedtest.net and report your internet speed. You can also download the latest Adobe Flash and Java.

Read other 1 answers
RELEVANCY SCORE 52.4

Hi, a friend has asked me to look at a machine which according to her 'when I go onto the internet, does not work'. I have little more to go on than that, but my first thoughts after checking device manager (all is ok) was to check for a virus. I've downloaded on another machine the latest version of MBAM and installed this fine. When I try to execute it though, it tells me the database is 70 days out of date and if I click yes to update, the program stops. No messages or anything, just stops. If I don't update it presents me with the main MBAM screen, but when I click 'scan', the program again just stops.

Grateful for any suggestions.

Marc

A:Malwarebytes starts then stops

Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.=============================================================================Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.====================================================================================Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result.=============================================================================Download aswMBR to your desktop.Double click the aswMBR.exe to run it.If you see this question: Would you like to download latest Avast! virus definitions?" say "Yes".Click the "Scan" button to start scan.On completion of the scan click "S... Read more

Read other 10 answers
RELEVANCY SCORE 52.4

Dear Support. I have Windows XP Pro with a Pendium 4 Dual Processors, 80 Gig Hard Drive. 1 Gig Ram. My problem is Pogo games. I can start them then they freeze up but the background noise is still running. Used to run perfectly. My Java is up-to-date and I installed MS Java this morning. No help. Now I don't know what to try and I did clean out the caches. Can you suggest something else please. Thank you so much.
 

A:Pogo starts then stops

Read other 10 answers
RELEVANCY SCORE 52.4

Hello, I have been using HP Pavilion g6 since 2012. I lent my laptop to my sister. She said that computer first warmed up, then shut down. When I checked, the fan was not working. I took the computer parts, cleaned the fan and the inside. When I put the pieces together, when I turned on the computer again, the fan still did not work.More precisely, it worked, but after 3 seconds it was shutting down. This loop continues this way. I replaced it with a spare part of the fan, but the same problem continued. I uploaded a video for the status summarization. https://www.youtube.com/watch?v=LTaHbmLNT8Y&feature=youtu.be I have tried -Remove the bios battery and reset the bios.-Reinstalling the operating system-Press the power key for 30 seconds. I just did not update bios.I do not know if it will be useful. I did not want to do it because it was risky.The fan runs very fast when the computer is first turned on, but then this problem occurs. It's really a strange problem.  Do you have any suggestion?

Read other answers
RELEVANCY SCORE 52.4

i have a hp g62 notebook and the warranty expired 2 months agothe problem is that the pc gets chargex for x period then it stops for a while, it starts again or not, dependssometimes may charge a littleit is not charger as i have tried a new oneit is not battery as i tried without itit is not software related (i think) because even when it is powered off it happens, also i have restored default battery settingstoday i did a bios update and still no result.please help mei byed the pc on greece and i live in albania, so in albania is not a specialized laptop service or there arent hp centers.please please help, i have 2 months like this 

A:not charging, starts then stops

Here is a solution that has worked in the past, so it's worth trying.

 

1. Turn off your laptop, unplug all wires, and remove the battery.

2. Hold the power button for thirty seconds.

3. Afterwards, reattach the battery and connections.

4. Boot the notebook up and see if the battery will charge now.

 

Let me know if that solution works for you or not. Best of luck!


 

Read other 6 answers
RELEVANCY SCORE 52.4

At first my computer would not reboot. Then I unplugged everything and took out the memory chips and moved it so I could get to it. When I plugged everything back in the computer would start-up and shut-down in 5sec. intervals. It only stopped when I unplugged the ATX_12V power supply to the motherBoard. It is the power for the CPU. It is a Gigabyte 695p motherboard. I do not know if it is the power supply or motherboard or CPU chip. Can you help me?
Gene

A:Computer starts and stops

First you can try taking out the memory sticks again and re-seat them and see if the problem goes away.

Another thing, try clearing the cmos and see if that helps as well. Refer to your motherboard manual for the cmos jumper location.

Read other 2 answers
RELEVANCY SCORE 52.4

I have an Ideacenter 300S which is just over one year old. It is connected to a power surge. It has not been used much. It ran two weeks ago. Now, I can hear start when I turn it on but then it stops. LED does not light up.

Read other answers
RELEVANCY SCORE 52.4

Hello all,

I tried to install office 2003 professioanl onto a notebook that had a 60 day trial of office on it. Now Outlook 2003 professioanl starts, then disappears and stops after a few seconds.

The event viewer tells me that "
"the MOF file created for Outlook service could not be loaded. The error code returned by the MOF compiler is contained in the record data. Before the performace counters of this service can be collected by WMI the MOF file will need to be loaded manually. Contact the vendor..."
I have tried multiple install/removal.repairs with no sucess. Deleted the pst files, etc. I'm stuck. Has anyone been here?

Thanx in advance
Peter Maxfield
 

Read other answers
RELEVANCY SCORE 52.4

Ok, I have been looking all over and been at it now over 6 hours so I am pretty ticked off right now. Just got a new desktop today with Windows 7 and a WRT610N Router along with a WUSB600N V2 dongle as the tower had no room in it for my PCI card. Anyways, after figuring out the CD rom that came with the dongle was nothing but fail, I found the latest driver on the linksys site, that got me futher, all the way to the same problem I am having with the ralink driver. I pick up the networks and what not, when I go to connect however the green slider makes it just to the end and stops moving, and nothing happens no matter how long you wait patiently.

I am never prompted for a pass. I tried turning off that secure thing on the linksys router, it made no difference, I am frustrated and out of ideas, any suggestions? I called linksys support and the douche on the other end of the line insisted on getting me the drivers again, and put me on hold for 10 minutes when I finally hung up.

A:Starts to connect and stops....

Get the best driver. Try different ones if you need to.

Set the router to 100% transmit power, beacon interval=500ms and change the wireless channel its radio broadcasts on.

Read other 5 answers
RELEVANCY SCORE 52.4

So I have a HP CQ60 215dx. When I first plug it in its starts to charge the battery and then stops cold. The battery monitor shows charging and the l.e.d. on the front shows charging then goes out.Two different adapters and the same thing. If I unplug it it will charge for a second and stop. Flashed the bios. Did the unplug adapter remove battery and press start button deal and still same thing. If I keep doing it for a long time the battery will show a charge improvement. Think it's the M.B.? Any help would be appreciated. Thanks to those who tried to help with my last comp. But it was the hard drive like you said. This si the newer model I acquired and still having computer issues H.E.L.P.
 

A:Starts to charge then stops

Read other 16 answers
RELEVANCY SCORE 52.4

Please help;
When trying to access my office's network using a VPN connection (FW-1 secure client) I am able to validate my password exchange get some data and then... it stops. From that point the connection over VPN is not working anymore.
Regular internet connection works like a champ - Only VPN is problematic.
It happens on both 98 and XP machines, across ADSL and Cablemodem connections.
 

A:VPN client starts and than stops...

First of all, you CANNOT post similiar threads multiple times.. So please don't. Be patient and let give us some time to answer your question or solve your problem.

Secondly, you have to be more specific about your current situation. Be sure to open up necessary ports if you have a firewall, and double check your IP addresses.
 

Read other 2 answers
RELEVANCY SCORE 52.4

Hi folks....
Here is my problem. When I turn on my computer, It powers up and before anything flashes onto the screen, it just dies,(everything turns off except monitor). I then turn the switch back off and on and then it powers up normally. This has only happened twice, last time was this morning.
Any idea what might be happening? My system is a home built I got from Sis-in-law. It is a pentium 100mhz w/ 1gig scsi hdd and scsi cd-rom with 32 megs ram. Like I said it works now since I'm posting but could this be a warning? Thanks in advance.

Dan B.
Tacoma, WA
 

A:computer starts then stops

Hi,
I'd say that your power supply is on the verge of going out. Luckily for those older system power supply's are not expensive. But i'd look into buying a new one soon. Hope this helps.
 

Read other 1 answers
RELEVANCY SCORE 52.4

I've got a Gigabyte GA-K8NS Pro motherboard with a AMD Athlon 64 2800 processor. The heatsink fan stops and starts during bootup.

At first I didn't notice the pattern so I got a replacement fan from my supplier because I thought the fan was failing.

The pattern is that the fan starts when I power up the machine. During the BIOS screen the fan shuts down. Finally, just after the the "Windows XP Startup.wav" plays the fan restarts and stays running for the entire time I've got the machine on.

I don't know but perhaps the fan has always done this and I'm just now noticing.

Has anyone ever heard of something like this?

This setup is about a month to a month and a half old.

TIA
 

A:Solved: CPU fan stops and starts

I figured this out. In the BIOS there's a setting for "CPU Smart Fan Control". I changed it from enabled to disabled and it solved the problem.
 

Read other 1 answers
RELEVANCY SCORE 52.4

Guys this may not be the place to to ask this. When I was running OCCT test this mouring and about 40 min. in the test the video would stop and go to a black screen and 1 min later it was back and the test was still running normal and the test ran to the end without any errors. The test I was running was on OCCT was linpack not the video test. The temps where fine not to hot. It is only OC about 5% the system is running fine without any problem and this is the first time this has happend?? Maybe it is normal while running a test like that??

A:video stops and starts

Thanks for the help....

Read other 1 answers
RELEVANCY SCORE 52.4

I have windows xp proffessional sp3
I connect to the router through ethernet.
When i browse IE or firefox the internet is working the one minute, the other is not.
Any suggestions?
 

A:internet starts and stops

would you post the following information when working correctly and the repeat ALL the tests when it fails and repost the results

------------------------------------------------------------------------
{ipconfig /all}
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here
We would like to see the results from ipconfig /all post back the results here
-> Start
-> (XP - enter the following in the RUN box)
cmd /k ipconfig /all
-> (Vista or Windows 7 - enter the following in the Search box)
cmd /k ipconfig /all

A black box will appear on the screen -
rightclick in the box
select all
enter
control key + C key - to copy

then reply here and
control key + V to paste
------------------------------------------------------------------------
{Ping Tests}
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

Start> Run {search bar in Vista}> CMD to open a DOS window and type:

Type the following command
Ping {plus the number thats shown against the default gateway shown in above ipconfig /all}
Post back the results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping google.com
Post back t... Read more

Read other 3 answers
RELEVANCY SCORE 52.4

I am currently having an issue where my PC suddenly starts, and then stops booting up. The Monitor screen does not turn on when it starts either, but everything seems to be working correctly. Everything turns on as expected, but then my PC just stops running after about 1.5 seconds, and then tries to boot up again. My motherboard is an MSI Pro Series Intel B250 LGA 1151 DDR4 USB 3.1 micro-ATX Motherboard (B250M Pro-VD) and the "EZ De-bug" lights flash on when I attempt to turn the computer on. I have no idea what to do. ANy suggestions?
 

Read other answers
RELEVANCY SCORE 52.4

Ok, so I've got a new PC, first time I turned it on, it totally stopped working, can't move mouse, can't use keyboard, you know, totally blocked. So I've restarted it and then it was okay, so I've ignored it. Now, after 3-4 days, avast detected some malware, around 22, I've choose to "move to chest", but 4 files couldn't be moved, so I choose to delete, I got a message that it would be deleted after reboot, so I've restarted it and same thing happened, PC totally blocks, programs start turning on (Skype, Avast...etc) after they turned on, PC blocks. Anyway, I tought that avast, since it was free and all, was actually reporting files that aren't actually viruses, but are important for windows to work, so now it blocks all the time, when It starts up, because those files were important, tought that's my guess, you know the best.

Now I'm in safe mode (with networking) to try and find some help, everything's okay now, so it might be some program that's causing this when I start it normally.

I have windows xp sp 3, AMD Athlon II x4 630, 2.8 ghz, 3 gb of ram. Tell me if you need anything else?

I need this really fast, it's important, so please help me as soon as you can, I need my PC. Or at least tell me if you can help, so I don't have to carry it to PC service, they really keep it for a long time, like for month, it's annoying.

Thank you. Also, a guy who installed everything made a backu... Read more

A:PC completely stops when it starts

Read other 9 answers
RELEVANCY SCORE 52.4

I am working on a Toshiba Satellite M45-S169 running Win XP It keeps shutting itself down. Basically, it will shut itself off with increasing frequency, and then, at some point, it will shut off and refuse to restart. When I try to start it, the fan turns on, but nothing else no hard drive, no monitor. If I hold down the power button, it will just continue to restart and do the same thing. It takes sometimes 20-30 tries to get it up and running again. Once it's on, it's okay, but obviously something is messed up. I have checked the hard drive with CHKDSK and all is ok. I used a program from Toshiba to check the memory, hard drive, video, audio etc and all is ok. The heatsink is not blocked and I don't see anything fried on the motherboard. Any suggestions would greatly appreciated. I am about to pull out my hair on this one. I forgot to mention I did a defrag and virus scan while the computer was up and running. I also checked msconfig to see if there was anything running that I could eliminate to correct the problem. I looked in control panel to be sure there were no unrecognized programs loaded.
Thanks in advance.
 

A:Laptop starts and stops

Read other 16 answers
RELEVANCY SCORE 52.4

I have a problem I can't solve.

The netsh.exe file starts and stops each 4. second and the CPU useage goes up and down between 0-10% all the time. I didn't do any thing to start the netsh.exe file, but I've found out that if I stops the npfsvice.exe file it stops.

As far as i know the netsh.exe file is a systemfile and npfsvice.exe is something for the Norman Personal Firewall

I have a 3year free support on my computer.
So I've tried to contact Norman about this, but they won't help me since the program was preinstalled on my computer. So I tried to contact Fujitsu Siemens, but the computer was older than 6 months. Then I tried to contact the shop I bought it in and they told me to call a number that cost $4/min

A:Netsh.exe starts and stops

I would be glad to help you.

Sounds like your tech support people are playing the old hot potato game with you. Shame on them. Well, it doesn't matter. We will help you here.

netsh.exe is a Windows utility for command line operations.

See below for more.

http://support.microsoft.com/default...NoWebContent=1

But lets take this from the beginning.
It would be very helpful if you could post a HiJackThis log for us. HiJackThis is a diagnostic and repair tool that tells us some very basic information about your computer, including OS, internet browser version, and service packs, which helps us to analyze your problem. So please download HiJackThis and post your log. It is important to have the most recent version of HiJackThis. The most current version is v1.98.2.
------------------------------------------------------------------------
HijackThis instructions (~157KB) Download HiJackThis (written by Merijn Bellekom) from
http://www.spywareinfo.com/~merijn/downloads.html
Save HijackThis.exe into its own permanent directory, NOT in a TEMPorary folder or on the DESKTOP. Temporary folders get cleaned out periodically and are often destinations for viruses and spyware. So you don't want it there. If you place HJT on the Desktop, then all of your logs and backups will get spread out over the desktop. That is not efficient. For simplicity, I recommend c:/program files/HJT/
Close all windows, programs and especially internet browsers.
Doubleclick Hijack... Read more

Read other 16 answers
RELEVANCY SCORE 52.4

Help me please
I am using a Checkpoint VPN securemotre client.
I can authenticate my user name and password, exchange few hundred bytes, and .... it stops working.
Same happens on both my 98 and XP machines.
One is accessing from the ADSL and other from a cable modem.
Other internet sites which are not connected over the VPN are working perfectly.

Any ideas?
Thanks,

 

Read other answers
RELEVANCY SCORE 52.4

please I have a battery issue on my HP 14 notebook PC.. suddenly yesterday stopped charging and on checking the battery icon,it shows plugged,not charging... am really worried about this cos it actually worked yesterday but a friend used it till the battery went off totally. on getting home to charge,i noticed it didn't charge and the charging indicator was always changing from the orange to white...

Read other answers
RELEVANCY SCORE 52.4

I have a Think Pad which starts but stops loading XP. I swithched off it may times and started but windows XP does not load. Only black & White screen without any thing displayed on it. How it would be overcome Please tall me.

Girish K Gupta

A:My IBM Think Pad starts but stops loading XP

Hi and welcome to TSF try a repair Repair Windows XP by Performing a Repair Install (Part 1 of 2)

Read other 2 answers
RELEVANCY SCORE 52

I have had Windows Virtual XP installed in my Acer TravelMate Windows 7 Pro laptop for a couple of years and it's always run without problem.
In the 3-4 months since I last used it it will not now run. It starts and the progress bar gets to 'Virtual' in 'Starting the Virtual Machine' but then it disappears off the screen. The two executables - vpc.exe and vmwindows.exe also stop running in Task
Manager.
I have uninstalled the webcam software but I never suspected that as it's always been installed and this problem has only occurred in the last few months.
All Windows 7 Pro updates are up-to-date. I rely on this VM for my programmable remote control as the software only runs in XP. Hoping someone can help.
I do have the installation files - WindowsXPMode_en-us.exe and WindowsXPMode_N_en-us.exe. If I uninstall are those the only two files I need?

Read other answers
RELEVANCY SCORE 52

Hello all,
hoping for a bit of guidance. I have a HP t490.uk, 3.2G P4, 1G ddr RAM, 240G hd drive and a Radeon 9600. When playing any game, when the fan starts the screen momentarily freezes and then carries on, but again when the fan stops it freezes. This problem may seem small and I expect some ppl have more need for support but it really is doing me in! All parts are original and I have not (knowingly) tampered with anything. I have all the most recent drivers and directX9. I have had this problem since buying the PC but do not wish to return the thing as all I hear is horror stories about PC world. Any help would be gratefully recieved,Thanks.
 

A:Games freeze when fan starts/stops

Can't antbody help pls?
 

Read other 2 answers
RELEVANCY SCORE 52

I have an Ideacenter 300S which is just over one year old. It is connected to a power surge. It has not been used much. It ran two weeks ago. Now, I can hear start when I turn it on but then it stops. LED does not light up.
 
Mod's Edit: System model added to the Subject line to improve visibility / clarity.
 

Read other answers
RELEVANCY SCORE 52

E1-510P-29208G50MnkkWhile under warranty, my laptop suddenly wouldn't turn on correctly. The fan starts and the LEDs light up for a few seconds and the system shuts off. It then starts again and gets caught it a loop. It never gets to the boot screen. The first time it happened, tech support was unable to help online and I had to send it in to be repaired. I cant find the sheet that they sent saying what they did but my computer was sent back and none of my settings were changed. My laptop is now doing this again and is no longer under warranty. Any idea what this could be?I have already tried draining the power out by unplugging and removing the battery and holding the power button. I have also tried turning on without the battery in and sometimes it does the shutting on/off and sometimes it wont start at all. The only significant thing that happened was the battery had drained entirely right before this issue happened. Also, my adaptor occasionally has an intermittent connection but the led light is lit orange so I do not believe that is the issue here and I do not have another adaptor to test it with.I am extremely frustrated as this is the third issue in just two years I have had with this device. This is my first acer product and I have had nothing but problems with it. If anyone knows how I can see what they did to fix it the first time, this would be helpful too.

Read other answers
RELEVANCY SCORE 52

I have a Dell Inspiron N5010 laptop, it's a few years old. I'm on Windows 7. The problem I'm having is that the computer will be running fine, and suddenly the computer will begin to start and stop, running so slow that I have to reboot. I can see in the Task Manager that the CPU usage fluctuates between 0% and a normal level. All other indications of the computer 'working' - the processing light on the keyboard, the movement of the mouse, the sound of the computer working - all start and stop in sync. It's like the whole system freezes every half second and then unfreezes again. After rebooting it goes back to normal.

The problem started back in March. At first it happened several times in one week. Then it seemed to go away for a while, and now it's been happening somewhat frequently again (two days in a row just now). I can't think of anything I did back in March that would have caused it, nor can I think of a pattern of what actions trigger it.

Any help would be appreciated. Thanks.

A:Computer freezes up, starts and stops

Is it happening in all applications or just in a browser?

Read other 10 answers
RELEVANCY SCORE 52

I have a Windows XP Pro with a P4 2.44 GHz and 1 Ghz of memory. where after illiminating a bunch of viruses and trojans, I now have at least two problems:

1. The audio and video alternately starts and stops. When I have audio, I have no video and vice versa. It does this with movie files on my computer and the sound starts and stops with audio cds in Windows MediaPlayer 9 and real player.

2. My wastbasket has no wastebasket icon.

Any ideas?

Thank you.

A:Audio and Video starts and stops

any help would be greatly appreciated. Thanks.

Read other 2 answers
RELEVANCY SCORE 52

I am having a problem with my battery, when i plug it in it begins charging and then after a 10 min or so it just stops, I un plug it and plug it back in and it starts charging again but then after a little bit it stops again.

A:Battery starts and then stops charging

Battery is not charging properly.
 
To diagnose, I would suggest you to please update the Power Manager software and also update the Bios of your system from the below mentioned web link.
 
http://support.lenovo.com/en_US/product-and-parts/default.page
 
After this, please restart the system and check if the issue resolved.
 
 
Regards,
Sameer





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 2 answers
RELEVANCY SCORE 52

Hi, I am new here basically in order to sove a problem on a friend's laptop. It is a Toshiba PSM35E.
When I first switch on the b/w selection screen starts with the safe mode etc options. Any of those options results in the Windows XP screen loading showing. As soom as it loads, the machine restarts to the same cycle which repeats until I pull the power plug. The battery is useless and has been removed.
I hope you can think of something. The fan and heatsink have been cleaned and fresh paste applied.
The cd drive is empty.
Kind regards from France,
Humphrey
 

A:Toshiba laptop stops/starts

I might add that it does not matter which options are checked from safe mode to last known, it still does the cycle.
I also tried booting from the network with no change.
 

Read other 1 answers
RELEVANCY SCORE 52

My OS is Windows XP Home, SP2, Processor: AMD Athlon(tm) XP 1800+, MMX, 3DNow, ~1.5GHz, 2048MB RAM, Monitor: DCLCD 17? Plug and Play Monitor - Max Res: 1600,1200, Display Memory: 256.0 MB, ATI RADEON 9600 Series AGP, DirectX 9.0c.

The problem I'm having is that I've downloaded the above 3D Windows XP Screensaver from www.microsoft.com - Microsoft Download Center and installed it correctly. However, when I select it as the current screensaver and attempt to preview it, it appears briefly (3 or 4 seconds) and then abruptly cuts off as if the keyboard or mouse was touched. So I clicked on "APPLY and OK" anyway to use it as the current screensaver with a 5 minute delay, (there are no property settings for this particular screensaver). Now, whenever the screensaver activates after the 5 minute delay, it does the same thing. What is the problem? I?ve had absolutely no problems with any other screensaver other than this one.

A:3D Windows XP Screensaver STARTS/STOPS

Take a look at this article from Microsoft.com, it might help.

http://support.microsoft.com/kb/306676

Read other 2 answers
RELEVANCY SCORE 52

Today my computer found and quarantined virumonde then said I needed to restart. After restarting, I entered in my windows log in password and it started to load, but then saved and brought me back to log in screen. I have tried numerous attempts and still get the same results. I get the same with trying to start in safe mode. I have read some posts and cleaned the inside out and made sure all fans are running, but still no success in getting to desktop. Any suggestions to fix this would be greatly appreciated as that computer has my final assignment on it and I have no way to retrieve it to be handed in next week.

I am running Win Xp Home edition on a Gateway 700X model compuer and not sure what other informatin will be helpful as this is my first time using a forum.

Thank you for any help,
Rob

A:PC starts then stops windows loading

I have looked over some posts and decided to run the windows repair disk that came with the computer and can now get desktop to load. Can anyone help me search for and remove whatever caused this to happen in the fist place? I will run antivirus and post what it finds. But as for hijack this logs, I have no idea how to post them to help you in helping me but will dig thru more boards to see what I can come up with.

Read other 3 answers
RELEVANCY SCORE 52

I have researched this on the site, and I think I have all the requisite updates (java, flash, etc.) My computer (on vista pro, with 4 GB RAM) was showing videos just fine (YouTube, MSNBC, whatever) but now it stops and starts so much it literally takes me 15 minutes to watch a 5 minute video. Needless to say I'm not watching much now. It doesn't seem to make a difference if I'm connected directly or wirelessly (using an HP laptop - less than 6 months old, and as I mentioned, all was fine). It's quite irritating. Any help? As always, thanks in advance, this is a great site.
 

A:Internet video stops and starts

Read other 6 answers
RELEVANCY SCORE 52

This is my first time posting, and by no means am I a network pro. 
I am having an issue with my network traffic starting and stopping. I have a 6 mbps DSL connection, and when downloading or streaming, I hit 6 mbps for a few seconds, then drops down to three or so, then nothing. A few seconds later it starts up again. My TCP connection seems consistent. Here is a screen shot from Resource Monitor.
 
Does anyone have an idea what might cause this?
 
  

A:Network connection starts and stops

Can you please go to http://www.speedtest.net and perform 4 tests, and post the results and also.Please perform the following, so that we can get the exact specs of your computer. This will better assist us in helping you more.Publish a Snapshot using SpeccyThe below is for those who cannot get onlinePlease take caution when attaching a text file to your post if you cannot copy/paste the link to your post, you will need to edit it to make sure that your Windows Key is not present.

Read other 11 answers
RELEVANCY SCORE 52

I have an HP 8705i (CTO) computer (purchased Oct., 2000) with:
933MHz PIII
768 MB RAM
two hard drives: 1st: Western Digital 320G (C-drive is on here)
2nd: Maxtor 120G
Running XP Home--upgraded from WinMe in 2005 (approx.)
USB 1.1



What it's doing currently:

I can start it and it will go through the boot sequence, as well as the black WinXP loading screen (with the moving blue progress bar). It will then go to the next screen (light blue with WinXP logo)....and then stop.


What has happened in the past:

A few weeks ago, it worked fine in the AM, then later would not give us the Welcome screen with the listing of users, just a pop up box where one could put their username and password (if any). I also got the error: "Error loading C\Windows\system32\NvCPL.dll A dynamic link library (DLL) initialization routine failed."

(This is for the control panel for my nVidia video card.)

At this point, I could get into Windows with no problems except for the ones mentioned directly above. I tried running McCaffee Quick Scan, which came back clear. I tried a Registry Cleaner--there wasn't anything out of the normal there as I recall. I also ran 'Speed Up My PC'--with normal results there.


Another error I got around that time (going from my notes about it)-- was "Integrator.exe--Application Error. The application failed to initialize properly. (0x0000142). Click on OK to terminate the application."

At this point, I was just a... Read more

A:XP Home starts to load, then stops

Another option would be getting another drive, copying from the 120G as I did previously. My apologies for not mentioning the obvious

(In my defense , it's been a crazy month--my mom has been in the hospital and also has some other serious medical issues going on. I've sometimes met myself coming and going lol )

Thanks again!

Read other 11 answers
RELEVANCY SCORE 52

I haven't seen this problem discussed in other threads. I am able to access the DVD drive during the start up routine until Vista gets running. Any ides about what the problem might be? Thanks for your help.

A:DVD stops working when Vista starts

Welcome
Sounds like there may be a conflict with other software. Try this solution. Its the same for Vista
http://www.sevenforums.com/tutorials...n-startup.html

Read other 6 answers