Over 1 million tech questions and answers.

Strange Video Connector

Q: Strange Video Connector

Hi EveryoneI was looking for some type of connection that would go from a VCR to my pc to 'convert' the video to dvd and found these!I know what the three colored cables are and I know what the S-video connector is but the one at the other end .. has me stumped!It 'looks' like the typical S-video connector except it has 8 pins and does not fit any female connection that I have ever seen.Any ideas?Thanks,MC

RELEVANCY SCORE 200
Preferred Solution: Strange Video Connector

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Strange Video Connector

I found the answer.

Thanks anyway folks.

MC

Read other 2 answers
RELEVANCY SCORE 52.8

I have an Emachines T2482 computer that I bought before coming to finland. They are very bad with power supplies going out as I have just read from the internet. My dad had almost the same model as I have and it crashed after only two years. He had a replacement motherboard put in his PC but he is a very old man and he did not realize that the guy had screwed in the monitor cable to the computer and one day he was trying to remove it and broke the video pin connector. Last time I was there I carefully removed the video pin connector so that I could use the motherboard and/or components if I needed them on mine. He bought another PC. So now my motherboard and/or power supply has crashed as well and I have his motherboard here with me. I want to try and connect the new motherboard to to my PC but since there is not a video pin connector I am thinking of buying a cheap video card to put in the PCI slot. My question is how can I get the PC to work that way? Is it so that the PC should boot up even though the video card driver is not installed yet and I will see something on the monitor or is it so that I will most probably not be able to use the motherboard if it only has a PCI video card installed? I have not done that before and I am thinking that the new video card won't be active immediately since it will be new and no driver installed. Of course without the card working and without a monitor to see anything, I will not be able to go through the bios setup to ... Read more

A:Broken video connector on motherboard/can i boot up with PCI video card?

The problem is, if the psu went then the mobo may well be damaged from that happening. Sounds like the best place for it is the landfill site.
 

Read other 3 answers
RELEVANCY SCORE 52

Recently Swapped out my old enermax PSU for a new one. Plugged everything back in. I inadvertenly disconnected a a twin wire two prong cable which connects to the hinge of the front door of the Tower. It is tied into the other connectors for the system pannel(20 pin) connector on the motherboard. However i do not know where it plugs in?

I would not normally care but the PC will not power up with the new PSU. All i am getting is the standby power LED on the motherboard to light up. I have connected the two fans to the same cables as the EZ_plug( which i just use a ordinary four prong connector). The DVD and CD-R drives use the same power cable. The HDD i have using a SATA power connector. Finally the floppy drive just uses a standard connector with nothing else on the other 12v connectors. The motherboard uses a ATX connector, EZ_plug and 24 pin connector.

I just realised i connedted the PSU up incorrectly. I used an EZ_plug with the ATX connection which i should not do with a Geforce 7800 GT on Asus A8N-SLI Deluxe(ez-plug should only be used with two cards?). I also forgot to connect the six prong connector on the video card. Would this earlier omission on my part have damaged the mobo? I rectified and still no change?
 

A:Strange Connector on Alienware Aurora Door

That 2-pin plug is probably 5 volts gonig to LEDs in the door. Carefully go over the motherboards manual and recheck all the power supply connections to it. If all else fails, take the system down to the bare minimum, no sound card, no video card and only one memory stick and see if it powers up. Try resetting the CMOS while you are at it
 

Read other 4 answers
RELEVANCY SCORE 48.8

Hi All, I have t buy a video adapter for a new monitor. The Surface Pro has a mini-DVI and the monitor has full DVI, HDMI and VGA in-ports.

I am currently using an old DVI-VGA adapter and it is working fine at the monitor's recommended resolution, 1920x1080. But, if I can get a visually better display, then I will buy an adapter.

So, the question is NOT about specs but actual eye-ball stuff.

Am I going to see anything improve by going to a Mini-DVI/HDMI adapter or direct Mini-DVI/DVI cable? I mean the current VGA adapter is looking pretty damned fine to me, but if the display can be better then I will go for it. BUT, I must stay at the 1920x1080 to match the old monitor side by side.

A:Best video connector format?

I've tried swapping adapters and cables on a flat panel that has both DVI and VGA adapters and didn't see any difference in resolution or clarity. VGA often lets you resize and move the screen around while DVI tends to prevent that, but if the display screen is full sized and centered, there's liable to be no gain from switching cables or adapters.

Read other 2 answers
RELEVANCY SCORE 48.8

http://www.ebay.com/itm/ATI-Radeon-...815?pt=PCC_Video_TV_Cards&hash=item3f12c2d417.



I have this card in a Dell Optiplex. I thought it was a DVI connector but none of my monitors or adapters will fit it. Thanks
 

A:What kind of video connector is this?

I looked it up and it appears to be a DMS-59 connector. See here for an explanation: http://en.wikipedia.org/wiki/DMS-59
 

Read other 4 answers
RELEVANCY SCORE 48

I've used Windows Movie Maker with no problem, usually importing video stored on my hard drive that came from my digital camera.
New problem: I can't capture video from DVD player (we shot footage of a family gathering recently using a camcorder, and I want to edit it in Windows movie maker). I have the DVDs, which I can play, and I'm trying to capture from DVD player through the S-Video connector in my laptop. But my Windows XP Media Edition isn't recognizing the new hardware. Is there a driver I need to install?
 

Read other answers
RELEVANCY SCORE 48

I got a flat panel monitor as a hand me down. The only problem is that it uses the MDR20 connector. I'm pretty sure that there is not a cable converter(VGA). Does anyone know a decent video card with this connector that also runs on XP. Thanks!
 

A:video card w/MDR20 connector

Hi pscottlee

You can probably use any card that has a DVIF output if you buy an adaptor like DVIF-MDR20M Adapter as seen here. http://www.networktechinc.com/cable-usb.html

Some Ati cards also use the MDR20M connector. More information on your connector and some of the video cards that have it is given here.
http://www4.tomshardware.com/display/99q3/990707/tft-3-02.html
 

Read other 1 answers
RELEVANCY SCORE 48

I got a flat panel monitor as a hand me down. The only problem is that it uses the MDR20 connector. I'm pretty sure that there is not a cable converter(VGA). Does anyone know a decent video card with this connector that also runs on XP. Thanks!
 

Read other answers
RELEVANCY SCORE 42.8

Hi there. Please view this item
http://www.newegg.com/Product/Product.aspx?Item=N82E16833127063

I am confused whether or not the antenna or cable will screw onto my wireless adapter card.

My wireless Adapter card has a SMA connector on it with the screw wedges on the outside rather than inside with a pin in the middle.

Heres a photo of a similar SMA connector - http://content.answers.com/main/content/wp/en-commons/thumb/9/90/200px-Gniazdo_RPSMA.jpg

The brand of the network adapter is the same as the brand of the antenna they are both D Link so youd think they would fit.
will the antenna or cable screw onto that?

thanks, jordan
 

Read other answers
RELEVANCY SCORE 42.8

Hi. I am new to building computers and have a question on fans. My case has three fans. Two of my fans have both pin connectors and molex connector attached together. How do I power the fans ?- do I need both connections?
thanks
 

A:Fans with molex connector and pin connector

The 3pin connectors are to plug directly in to the motherboard......if your motherboard does not have the 3pin connectors then plug the molex into the power supply
 

Read other 1 answers
RELEVANCY SCORE 39.6

I am wanting to install a new video card. It has a VGA and a DVI output on it. The old card has only a EVC connector on it. From there it goes to a Y cable with 2 CRT monitors (VGA connections) coming off of it.

My question is. Can I use a DVI to VGA adaptor and hook both monitors to the new video card and do away with the T cable?

Thanks Bill
 

A:Can I change from a EVC connector to a VGA connector?

Most definitely. You can down convert form DVI to VGA, but not the other way around (inexpensively, anyway)
 

Read other 1 answers
RELEVANCY SCORE 39.6

I am working on a project and I have a Laptop monitor here that has a 40 pin LCD connector that I am trying to convert to HDMI to plug into an xbox 360. I have gone and looked for an 40 pin LCD to HDMI converter but all I could find was an 40 pin TTL to HDMI. Will this work? https://www.adafruit.com/products/2...2KF8Y_EOnrMVziicEfgwarUPZqSbe_j7LMRoCMFXw_wcB
 

A:Difference between 40 pin LCD connector and 40 TTL connector

Read other 6 answers
RELEVANCY SCORE 39.6

Hey- I just formatted my harddrive to clear out some old problems I was having. In the process I switched from win2kpro to XP. Everything starts fine to begin with, but after installing my linksys wireless card and restarting, the frequency gets all messed up, and I have no idea why. I'm in safe mode with networking at the moment. I've tried downloading the newest drivers, as well as powerstrip, but they do nothing. When I try to update windows, it hits me with [Error number: 0x8007043C] Any help would be greatly appreciated.
Video card: Nvidia Geforce MX/MX 400
Thanks,
~Brandon.
 

A:Strange Video problem.

try to boot from safe mode and either reinstall your video driver or lower the hardware acceleration in display properties > settings > advance > troubleshoot.
 

Read other 1 answers
RELEVANCY SCORE 39.6

Hello there,
I've searched the forum and cannot find my exact problem. I would dearly love some help! Whenever I try to play video with any player (real, windows media) the clip loads and starts and then the player screen goes blank. If I minimize the screen and then enlarge it again, the image will register for a second or two. I've tried removing and reinstalling the programs. Any ideas for a way to fix this?
Lots of appreciation for the help:
Thanks
 

A:strange video problem

Read other 10 answers
RELEVANCY SCORE 39.6

Hello and I hope someone can help. I have a laptop with an s-video out jack. When I connect it to my tv everything on the computer screen displays on my tv screen, but when I try to play a video file on my computer everything comes up but the video wont play on my tv screen. where the video is on the computer. It' all a black area on my tv. Any suggestions are much appreciated.
 

A:video out to TV acting strange.

Problem solved.
 

Read other 3 answers
RELEVANCY SCORE 39.6

Hello everybody, I entered computer hell a few months ago when my completely ancient geforce2 gts 32 meg graphics card stopped rendering polygons.

Now, I figured this would be just the end of the card's life. It was something like three or four years old and the fan had stopped working on it. I had since replaced most every other part of my machine save the graphics card, so I lived with my machine not rendering 3d anything until I could afford a new card.

Well I got a geforce4 128 meg card, and when I installed it my computer still would not render polygons. I reformatted my machine and tried again, and it worked... for about 48 hours.

It may not be important, but I played Knights of the Old Republic on the fresh format solidly until my wife wanted a game of Diablo, so I installed Diablo, played a game, and when I went back to KotOR the game didn't load (see below). I went on to install the rest of my games and try them with similar results, some of which are listed below.

My current machine I've built myself, it's got:

duron 1.8 ghz processor
foxconn 748k7aa 400 mhz fsb mainboard
768 mb of ddr 400 ram
onboard sound (at the moment, I've got an audigy one I yanked out to see if that was maybe causing issues)
geforce4 mx 4000 agp with 128 meg o ram

None of these parts were installed in my machine when the problem first came up, so I have to assume it's either a software conflict of some kind or:

My power supply (400 watt, ... Read more

A:Strange Video Bug (games)

... GPU doesn't have its own fan? Its probably the GPU overheating..

buy a zalman gpu fan (best out there that I know of) and if that doesn't fix it,
update to the latest nVidia forceware drivers from thier website.

And what do you mean it won't render polygons? Polygons are a shape..
Does it not render shapes well?

The PSU looks fine, (but how old?)

Could be the optical drive, since these games have to load files from a CD,
that could be causing the problems.

Solutions: but a GPU fan, buy a new optical CD-Drive.
 

Read other 4 answers
RELEVANCY SCORE 39.6

I'm having a few issues, and just wanted to see if anyone else has had this happen, or may know what causes it.

First, this could be related, I'm not sure, a few days ago I ran GPUZ and CPUZ, clicking through the tabs and realized my video card was set at Pci-Express x4 1.1. I reseated the card several times, cleaned the pci-e slot, then used my secondary pci-e power connectors, and finally it's running as it should @ x16. I'm not sure how long it was like that, the performance decrease wasn't noticeable. (I'm actually curious if it was just reporting it wrong, because my benchmarks were extremely close; Counter Strike: Source| Video Stress test 216fps at x4, then when I fixed it, 224fps. All settings maxed. This all happened two days ago, and has been fine since fixing it, but..
Now, and this never happened before, and started right after that issue, sometimes when I boot up, if I right click the desktop, and select 'Refresh', the screen go's black for a moment, for about exactly 1 second, not long enough for the monitor to say (no video), but close. Once or twice it did do that though. Once yesterday while browsing this forum, it started, but this time it only did it if I tried to scroll up or down a thread. I minimized my browser, and tried to select refresh at the desktop, to see if it was the same bug, and it did it, I had to restart the machine.
Then just now, today, I booted up, signed into my user, and exactly then, as it said loading, just as the desktop should appe... Read more

A:Strange video issues

I can only guess at this, of course, but that certainly sounds like it could be a failing video card. But it could also be due to a under-powered or failing power supply or even bad or faulty RAM.

The symptoms are very similar to TDR events, but since you are not getting any messages (Display Driver xxx stopped responding and was recovered") then we can assume it is not that, for now.

Try the new drivers. Make sure you are doing a clean driver install when dealing with video issues.

Also test to see if advanced graphics trigger the events by changing the desktop from an Aero theme to one of the basic themes. When I refresh my desktop it is nearly instantaneous - I can barely see the flash. Your video is dogging down to perform that simple task.

Also, look in your Event Viewer to see if there are any Critical Errors or Warnings that might point you in the right direction.

Hope that helps.

Read other 3 answers
RELEVANCY SCORE 39.6

I have a custom computer, with parts I can't desribe from heart. Either way I have a quite strange problem I reckon.
When I start my computer, everything seems fine. Once I get into windows, all good. Though as soon as I start a video file, either on computer or e.g. YouTube, the computer hangs. The only temp solution is to pull the plug. If I only reboot, the computer only says that there is no keyboard detected (!). Though if I either switch of the powersource or pull the plug, then the keyboard error upon reboot is gone, and once again I get into windows. Though as soon as hitting a website with any kind of video file the system stalls.
I have already purchased a new power sourse, as a friend thought it might be simply lack of power. Though the problem persists still. I am thinking it might be the video card, but I think that would be strange since windows still is working with full grafics.
Still I think it would be a hardware problem, dunno why, just think so with by base experince with computers.
I would be very thankful for any suggestions, as well as ideas how to check them.

A:Strange XP Video Issue

Hi disa, and welcome to TSF.

Some ststem specs would be good. If you don't know how, post back.

Read other 2 answers
RELEVANCY SCORE 39.6

This has got to be the strangest thing ever to happen to me. I had an AGP ATI video card with 256 mb on board which I do not remember the exact model number. It was about 8 years old. I have recently bought a flat screen 1080i 24 inch led TV which works great as a monitor ( and I mean great) Eventually the ATI card went bad and a friend had lying around an older NVIDIA TNT2 model 64 pro64 with only 64 meg on board. I almost flipped out to find that this older NVIDIA card was a 100 times better. Now everything is so crystal clear even at 1920 by 1080 my screen looks almost like an apple retina display. even the colors are so much brighter. The biggest complaint I had with the ATI card was poor contrast which I blamed on my TV/monitor, But no more. How could this possibly be? it makes absolutely no sense.
 

A:Very strange video question (:

Not sure. But I had an opposite experience many years ago. I had a p2 300 with an ATi Rage Fury Pro (I think) and played EV Nova on it, shortly after I built a 1Ghz Athlon Thunderbird system and had a GF2MX 32Meg card and it didn't look as good as the ATi.

Perhaps you didn't have the correct/best driver installed.
 

Read other 1 answers
RELEVANCY SCORE 39.6

When I plug my monitor into the onboard port it will not work unless I install a video card. If I try to use the video card It won’t work. The only way I can get my onboard video to work is by installing a video card that won’t run the monitor. WTF am I missing here. I had a hell of a time getting the driver installed for the onboard video, anyway I got it but I still need this useless ati vid card? Does it matter which video goes to 1st in bios agp or pci ? mine is safe at agp. Anyway any help would be much appriciated
 

A:strange video behavior

why wont anyone answer me om this one ?
 

Read other 1 answers
RELEVANCY SCORE 39.6

I have a system that all of a sudden does not display video after the W7 splash screen. This system has a graphics card in it and I had disabled the motherboards graphics port in the BIOS a couple years ago when I built it.

It has worked well ever since I built it but has changed due to either someone messing with it or maybe a windows update.

I currently have the system connected to a TV with an HDMI cable, but I have confirmed with an old monitor, it does the same using the VGA port.

I have also tried to repair using the Windows Repair Disk which strangely enough goes blank after the "Loading Files" screen.

All three options of safe mode stop after a certain amount of files that load. The screen does not go black here; it simply remains frozen with the file list showing.

I tried to do a fresh install of W10 and again goes black after the loading files.

Sorry I am being vague about the Hardware as I would typically look it up from the control panel and the boxes I had for the mother board, processor, GPU, etc are somewhere in the house and will have to find them.

Any ideas on what is going on? Maybe I need ot go into the bios and re-enable the onboard graphics and try that way.

Read other answers
RELEVANCY SCORE 39.6

I am having a strange problem with Media Center. I am using an ATI Theater Pro 650 tuner card connected to analog cable. Everything is perfect except for when the live TV picture is mostly white, I get a squealing sound, and the picture distorts a little. This is when the video stream is mostly white only.

I have the latest drivers for the tuner installed, and have tried old drivers as well.

Any ideas what would cause this?

Paul

A:Strange Video Problem

Whit picture means that there is a configuration problem with your TV tuner card.

Does your card accept analogue signals?

make sure you have it set to match your signal (PAL or NTSC)

Read other 1 answers
RELEVANCY SCORE 39.6

Hello there.

I've got this really bad issue with my windows seven 64 bits.

Everytime i try to see a video it simply crash and display a very strange screen...

Here is some screenshots :
ImageShack -

My PC :
Processor : Intel Q6600
Mothercard : NForce 680i SLI
Graphic Card : Nvidia 280GTX
Memory : 4x1GB
HD : 5 Seagate various size
Sound Card : Creative X-Treme Audio X-Fi

Any help will be appreciated

A:Video - Strange crash

I tried to install many versions of Seven but nothing work...
I also tried to replace the GTX280 by a 8800GT but same problem...

Read other 7 answers
RELEVANCY SCORE 39.6

Hey guys,

I currently have a Toshiba Satellite A200 Laptop (Core2Duo 1.73Ghz, 1Gb RAM, GeForce Go 7300, Vista Home Premium).

When I attempt to play 1080p video (MKV/h.264) using Media Player Classic it will play fine for a while at around 45-65% CPU utilisation, however after a varying amount of time (2-20mins) the CPU utilisation will suddenly skyrocket to 100% and remain at this level, and the video will start lagging and be unwatchable.
When I restart the video on MPC and skip to the most recently watched part, the same issue of lag will again occur after a few minutes.

Video lag had been an issue previously using VLC player but after I found MPC and installed CoreAVC I had been able to watch 1080p videos without any problems.
I currently have CoreAVC 1.7 installed. I have also tried installing the K-lite Codec Mega Pack, as well as uninstalling various programs such as PowerDVD and Nero360 to see if this made any difference, but have not been able to come up with any solution.

I have updated by graphics drivers to the latest version from the product page for my laptop on the Toshiba website, yet there is no discernible difference. I have also tried using a variety of media players, including Zoom player, KMPlayer and GOM player.

Any help would be MUCH appreciated. A poster on another forum suggested the issue may be related to buffer underrun or hard drive cache settings and referred me to these forums, however I am unsure of how to proceed in resolving this is... Read more

A:Need Help With Strange HD Video Issue!

Originally Posted by mcw


Hey guys,

I currently have a Toshiba Satellite A200 Laptop (Core2Duo 1.73Ghz, 1Gb RAM, GeForce Go 7300, Vista Home Premium).

When I attempt to play 1080p video (MKV/h.264) using Media Player Classic it will play fine for a while at around 45-65% CPU utilisation, however after a varying amount of time (2-20mins) the CPU utilisation will suddenly skyrocket to 100% and remain at this level, and the video will start lagging and be unwatchable.
When I restart the video on MPC and skip to the most recently watched part, the same issue of lag will again occur after a few minutes.

Video lag had been an issue previously using VLC player but after I found MPC and installed CoreAVC I had been able to watch 1080p videos without any problems.
I currently have CoreAVC 1.7 installed. I have also tried installing the K-lite Codec Mega Pack, as well as uninstalling various programs such as PowerDVD and Nero360 to see if this made any difference, but have not been able to come up with any solution.

I have updated by graphics drivers to the latest version from the product page for my laptop on the Toshiba website, yet there is no discernible difference. I have also tried using a variety of media players, including Zoom player, KMPlayer and GOM player.

Any help would be MUCH appreciated. A poster on another forum suggested the issue may be related to buffer underrun or hard drive cache settings and referred me to these forums, however I am un... Read more

Read other 6 answers
RELEVANCY SCORE 39.6

In trying to fix an "audio, but no video" circumstance, I checked to see if I have all up-to-date codecs and players. I do. I ran the video through GSpot and it reported that the video was playable on my system. Still "audio, but no video." Then I put on a DVD, and it played fine. Immediately after that, I went back to various video files (avi, wmv, mpeg formats) and this time they ran fine too. The following day, after turning off my computer and then rebooting, once again I had the "audio, but no video" situation. I put on the DVD, as I did the day before, and once again, it triggered the video formats to begin playing fine. Something about playing the DVD is acting as a trigger to correct the video problem. Anyone have an idea about what it might be?
 

Read other answers
RELEVANCY SCORE 39.6

My laptop boots up fine(I think). It makes all of the neccesary noises, hd. cd. and everything but 6\7 times the video is wonky. the lowers 2\3is a light blue and the upper third is dark blue. There are 2 verticle bars that run from top to bottom in it. a light green one that is stationary and a black one that moves in accordance with the touch pad. I have tried enabling and disabling the video drivers via the recovery console with no luck. The system never(even when the picture is clear) boots to windows, always gets bsod.(c000021a 0x0000005) followed closely by d0000144 error. I believe the monitor is bad but I want to be sure before going there. I would like to enable the external monitor port via recovery console if any one can help. No I can not do it via bios, I already tried. yes I have tried scanning the memory, all is well in their world. Tried scanning hd, same. I fear that the laptop is just trying to piss me off.

The starts are as follows:

windows xp home
inspiron B120
celeron M : 1.4 Ghz
512 mb ddr sdram

If any one has any ideas, please let me know. Thanks in advance for your help.

A:strange, erratic video

You do not need to go to the Recovery Console to run an external monitor. Depending on the make and model, you usually hit the FN key and one of the function keys, like F6 to toggle to the external monitor. I would also try updating your video driver.

Read other 3 answers
RELEVANCY SCORE 39.6

I have Bearshare V 5.10 (same result with V5.25), no

router and Zone alarm V6.5.737 running on an XP

machine with dual core CPU and 1GB memory. For some

reason, any .avi file I download ends up as a Video

Clip format (what is this anyway). Any program I use

to play it only shows spiral lines and not the

video. I tried converting it to wmv and avi formats

using the program Super & ended up with junk. I

downloaded a file I downloaded a year ago which

played ok back then, but now ends up as a useless

Video Clip. I now suspect the problem may lie with

my computer because I got the same result using

utorrent to download a .avi file.
Please let me know if this can be resolved.
 

A:strange video problem

We do not provide help with P2P programs at TSG.

P2P Instructions - The purpose of P2P is to illegally trade copyrighted material. We do not support the use of P2P networks and any threads requesting help for them will be closed. This includes Kazaa, Bearshare, WinMX, and the like. If you're interested in the topic, you are free to discuss it on our site (and please visit StealingIsIllegal.com), but information on how to use them will not be provided.

http://www.techguy.org/rules.html
 

Read other 1 answers
RELEVANCY SCORE 39.6

Hi.

I'm running on very stable XP system (P4, 800 MHz bus, 1GB RAM, 120 GB fast HD). I'm currently interesting in making DVDs for my child (as a matter of fact I've already done 11 DVDs) and I'm editing video in Adobe Premiere.
What I can't understand is the video quality of the final video I produce. When I watch final DVD on the standalone DVD player, the picture quality is OK (of course is a bit worse then original video, but I'm satisfied), but playing this DVD on the same computer (and the same DVD burner) on which DVD is made - drives me crazy. The picture is good in the static scenes, but not in the moving ones. It's full of strobo like effects and criss-cross lines. It's not happening in the standalone players!
And what I'm more confused is that same thing is happening when I play original footage (microsoft DVD AVI compression): watching it in the Premiere monitor window when I edit - everything looks perfect, but playing the same video in another program (BS player or windows media player or ...) yields bad results which I described earlier. I conclude that it must be a driver problem, but it's my top. Anybody knows?
Thanks in advance.

Read other answers
RELEVANCY SCORE 39.6

My friend and i are working on a new video and to make parts of it appear as though it is "streaming live via satellite", I decided to record with my webcam (Built in to the lid/monitor of my xps m1530). We recorded 4 small .avi files. However, we can not get them to play back. VLC gives us this:
Code:
No suitable decoder module:
VLC does not support the audio or video format "CVC1". Unfortunately there is no way for you to fix this.
When trying to play it back in Dell Webcam Center (that is what i used to record it), it plays but i get no audio.

Any ideas? thanks
 

A:Strange Video Formet

Read other 6 answers
RELEVANCY SCORE 39.2

Hello

I am having a problem when playing video files. If i open a file in media player calssic or VLC, it plays at about a third brightness, pixelated and with a reduced color palette. However if i pause playing the file , open up another video file in some other media player, and then resume the playback of the first file, it magically starts playing in full color and at full brightness.
It doesnt matter if i use media player classic, VLC or powerDVD, they all do it.
It has only been happening for about 4 months.
I have a geForce 6200 if that means anything.

Thanks
 

Read other answers
RELEVANCY SCORE 39.2

Long time no see guy's. Heres the trouble. I tried to use Windows Movie Maker for the first time and when I opened it, the "Save As" window opened. I tried to close it and it came right back. Tried to save it as somthing...popped up again. So I searched around for a fix, I have SP2 already so thats not the problem. I re-installed the software...same problem. So I went to download.com to find a similar program....installed it..opened it....same problem! WMM works just fine on my wifes crappy ol pc but my laptop just wont run any video editing software without this same "Save As" loop! Any ideas....graphics card cant handle it or what... It runs the Intel Extreme graphics (bummer i know), plus the GUI in Fruity Loops wont work either...strange!
 

A:Strange video editing problems...

Read other 16 answers
RELEVANCY SCORE 39.2

I have an nvidia 6800 GT. Over the last couple of days my computer has been having problems booting up. Sometimes it will go all the way until Windows should be coming on the screen and just stop and go black. Othertimes, once turned on, the power light on the monitor will just flash as if there isn't a signal (but no "No signal detected" message on the screen.

As of today, all I get is the flashing light and black screen. I put the card in two friend's computers and it worked fine. I put 2 different old nvidia cards in this computer and both booted up fine.

When trying the 6800 in the computer again, I got the same problem.

We're all stumped.
 

A:Very strange video card problem...

Read other 15 answers
RELEVANCY SCORE 39.2

If I am not mistaken, as I remembered that X240 packs with Intel HD Graphics 4400. I wonder why it is now shown "Intel HD Graphics Family". Even though I have updated the latest driver from Lenovo websites, but it stay still. I wonder if vo has changed its name to this or it is because my laptop has occured any errors?Also, I want to ask is Windows 10 normal with memory took up like this and disk percentage either? I think it is kind of too high... I only have 4GB of RAM installed, and 73% is kind of too high with just three tabs of Chrome are opening...

Read other answers
RELEVANCY SCORE 39.2

My media player(s) have a strange problem where All videos are black, with Rainbow colors and things like that. It happens on both WinAMP and Windows Media player.
any help is greatly appreciated.
 

A:Strange Rainbow Video Problem.

Sounds like a codec problem. What is the source of the vids you have problems with? Are they all from the same source? Is it only avi's and mpg, or are wmv's affected as well? Try going to www.divx.com, downloading and installing the latest dixv bundle. If you try playing divx compressed videos without the proper codec a problem like the one you describe can result.
 

Read other 2 answers
RELEVANCY SCORE 39.2

Hi,
Got a wierd problem that hopefully somebody out there might be able to help me with. Got an avi file downloaded from digital camera - put it on my network and tried to run it using WMP v9, it wouldn't play (sound but no video), but if I play the same file copied from the network to a usb flash drive from the usb drive (or to local hd), it plays fine using WMP v9. So my question is what's stopping me playing this file from my network - any ideas?
Cheers
 

A:Solved: Strange video problem

Read other 6 answers
RELEVANCY SCORE 39.2

Hello all...I have installed the game "Nexus - The Jupiter Incident" on my windows 7 (sp1) computer. In the past, it has worked fine with no problems. but now, whenever i try to run the game, the screen goes black for a moment, then i get this error message:

and the program crashes. I even opened up the .ini in question and poked around...line 11 seems to be no different than the other ones. I have never had this problem before...its very strange. My system specs are as follows:

------------------
System Information
------------------
Time of this report: 8/29/2012, 04:07:54
Machine name: ABBY
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: Lenovo H405
BIOS: LENOVO BIOS Rev: 1.0
Processor: AMD Athlon(tm) II X2 255 Processor (2 CPUs), ~3.1GHz
Memory: 2048MB RAM
Available OS Memory: 2046MB RAM
Page File: 1977MB used, 2114MB available
Windows Dir: C:\windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found... Read more

Read other answers
RELEVANCY SCORE 39.2

I know this is probably the last thing you guys want to read about but:

Well I just got a Geforce FX 5200 128MB AGP (yeah, I know..) and I'm having some problems.

When I first put it in and turned on my computer, the system didn't boot at all. Not even a beep. So I read up some things online and took an eraser to the gold fingers and applied a little wd-40 as well, and voila, it's working. I have it in right now actually. BUT... I can't play any videos or anything! I tried to open the D drive which had the Sim City 4 CD, and the system rebooted. No game menu or anything. Then I tried to play a video file and it rebooted again. I updated my BIOS for my motherboard but that didn't do anything either. I'm wondering if this is a compatibility issue with my motherboard. It's an Asus A7V8X-X, so i figured it should work, but I don't know where to find this out. I know it's a crappy video card to begin with but it should still work, and it's definitely better than my old Geforce 2 GTS 32MB.

I have uninstalled and reinstalled the nvidia drivers several times. My PCU is 400 watts. The CPU is an AMD XP2200 1.8 Ghz. I have 512 MB DDR 2700. So what's the problem? Any ideas?

Oh, and this is the card I have.


I also messed around with some of the BIOS settings like Aperture size, CAS Latency, RAS to CAS Delay, Fast Write, etc, but didn't do too much because I didn't want to break anything. Any... Read more

A:Strange problems with new (old) video card.

you did wipe the contacts clean before reinstalling the card, right? in any case, you should see to it that you have updated your drivers.
 

Read other 3 answers
RELEVANCY SCORE 39.2

Hello. I am having some trouble with my SAPPHIRE Radeon 9600XT 128mb. Heres my specs:
Gigabyte GA-7VT600 Motherboard
Athlon XP 3200+ with a MCX462-V heatsink and fan.
1 GB Kingston HyperX PC3200 ram (CL 2-3-2-6 @ 200mhz)
Sapphire Radeon 9600XT 128mb.
SB Audigy 2
Maxtor 120 GB IDE HDD.
Antec 480W True Blue PSU.

Heres exactly what ive done over the past week.

-Used to have 512mb of PC2100 RAM,Athlon XP 2600+, and a 300W generic PSU. *I First upgraded my RAM (1gb hyperx pc3200) and ran it at 166mhz with my 2600+. *It worked well.

-Next day my Athlon XP 3200+ arrives with new heatsink. *I take out my old processor, and CAREFULLY place the new one in (after spreading artic silver 5 on it). *I then put my heatsink on, connect the 80mm fan, and attemp to turn it on. *
Boot was unsuccessful. *It would turn on, but the HDD light would stay illuminated and nothing would happen. *I tried everything (reset CMOS, take every thing out except CPU, SW1 switch on). *I took the 3200 out, and put the 2600 with new heatsink back in. *Worked great (and cool). *I came to the conclusion my PSU was inadequite.

-Next day, go to COMPUSA and buy Antec 480W powersupply. *Replaced with the old one, hooked it up, etc. *Turned it on, it was loud, but it was smooth as butter and had great overclocking potential (41C load). *

-Next day, I go to put in my XP 3200+, and at first it was unsuccesful. After some CMOS resetting and all of that stuff, I got it to load my BIOS. The only problem is that my POST ... Read more

A:CPU/RAM upgrade = strange video behavior

Read other 7 answers
RELEVANCY SCORE 39.2

This question is being asked on behalf of a friend. They have a video file, MP4, that they can't seem to play or do anything with. I created the video file for them, so I know it is not dodgy with a virus or anything. It works fine on my PC, but on theirs it just acts as though it is not there even though it shows up in explorer.

I haven't been able to use their PC myself so I can only tell you what they have told me that they have tried. He says when he right clicks on the file it shows only a 1/4 of the properties that should be there when he right clicks on a working video file. Supposedly nothing happens at all when double left clicked, no error message, just nothing. I told him to try and use MediaInfo and other tools to view info on the file, but he just replies saying nothing happens when he tries it.

He uses AllPlayer to view video files, but has supposedly tried other video players and nothing works. I think they are using Windows XP.

I know this message is quite vague but that is all I know presently. Video file, MP4, wont play, has less properties on it than normal when right clicked, and other similar video files (with same codec) play fine. No error messages, nothing can be done with file.

If there are any suggestions I could tell them to try, then please let me know, thanks for your help in advance
 

A:Strange problem with MP4 video file !!

Tell them to try Haihaisoft Universal Player and choose to install the codecs that come with it (in the installation options). Right-click, Open With, and choose the player as default in case it got associated with something else. Or choose the mp4 association during setup.
 

Read other 1 answers
RELEVANCY SCORE 39.2

I'm using this old PC that can be seen in my profile, it's good for its purpose, but yesterday the VGA started to make some strange noises. I replaced the CPU fan just before it started (it is more powerful than the previous one was), cleaned the whole PC (even the VGA fan for sure), but it does these noises, sounds like it wants to start, but it can't, here you can hear it:



It was doing something similar before it (for around 2 days, nothing before that!), but not this often, and it wasn't that loud and annoying. I was thinking of the PSU it's also some old something, probably 350-400W, maybe because of the new CPU fan it can't get enough power? I'm gonna replace the whole thing probably in January, so I don't want to spend on it until then. Should I stick to the old CPU fan then? Thanks for any suggestions, have a nice day!

A:Suffering VGA fan with strange noises (video)

Well, it sounds very much like a wire or something is interfering with the fan's operation?

Read other 1 answers
RELEVANCY SCORE 39.2

I recently upgraded my GF4Ti to a 5700LE and am now having a very strange video problem.

First off I did uninstall the drivers before switching cards, and uninstalled the old card even though they both use the same driver.

When I try to view a video now, the video acts very strangely. The picture inside WMP actually moves around inside the viewing area like it's too big to fit and it's letting it scroll around inside the viewing area. But the picture IS the right size, when it scrolls off to the side, it just shows black and whatever corner of the picture remains in the viewing area. It moves opposite my mouse (for instance if i move the mouse to the right the picture slides off to the left of the viewing area) and only moves up and left or some combination of both.

Secondly when I full screen the video, i get very bad tearing, much like the wind effect in photoshop. This only happens when the video is centered, as even in full screen mode the video will move off to the left or up off the screen as if it's scrolling to show me more... but the picture is the right res.

I am running this throug DVI to a 2000FP (all hardware and software the same as before the card switch) and it's driving me insane! I like to watch videos on my computer a lot and this kills it for me!

I had the exact same tearing problem a few years back with a different video card (don't remember what one) and I don't remember how I fixed it. Any help is GREATLY appreciated... Read more

A:Strange video problem with 5700LE

Read other 7 answers
RELEVANCY SCORE 39.2

I have an odd problem with a new GPU card where I get no video signal on power up but as soon as Windows load the graphics driver, the monitor turns on. My system is self built and has been running fine until recently when I seemed to have a problem with the existing GPU, hence the warranty replacement. My system is:

Motherboard: GA-X58A-UD3R Rev 2.0
CPU: Intel I-7 950 @3.07GHz
GPU: MSI GTX 670 PE OC
Memory: 3*4GB Crucial DDR3
PSU: Coolermaster RS-850-SPHA-D3 850W: +3.3V:22A, +5V:25A, +12V:70A

Now I've already run through a swathe of tests and can confirm that all the components are working. Tried GTX 670 in another system and it works fine, tried an NVidia Quadro in the above system and it works fine - I see video from power up to Windows 7 login screen. I've tried different DVI cables and this makes no difference - the cables I am using are good.

Next, I have a KVM so I put both the GTX 670 and the Quadro into the system and cabled their DVI O/P to separate ports in the KVM. This is where the fun starts. NOTE: there is no onboard video so I need some way to see the BIOS and boot screens, hence this setup.

Some background on the motherboard. It has a BIOS setting that defines what PCI slot will be used as the initial display port. This can be set to PCI, PCI-E, slot 1 and PCI-E slot 2. As long as I put the Quadro in slot 1, I can use the PCI and PCI-E slot 1 BIOS settings and I will get video from power up but the GTX 670 does not produce a signal until Win... Read more

A:Strange video problem on boot

Seems the problem may lie with the card. After exhausting and eliminating all causes I could think of, the last thing I thought of to try was to connect to my TV using the HDMI socket on the card. This provides a video signal from power on but using the DVI socket I don't get video until Windows has loaded the GTX 670 driver.

Any ideas why the DVI socket is fine when I use the NVidia Quadro but doesn't provide a video signal in standard VGA when I use the 670?
 

Read other 1 answers
RELEVANCY SCORE 39.2

Hi ,

I replaced my mobo by a a7n8x-x asus one, strange thing is that it doenst boot normally.

When i am in XP and do a restart than there is no problem at all.
But when i 'shut down' the system , i cant get it booted up no more.
It keeps checking for 'analog or dvi ' connection , it finds no signal and it hangs.

solution : a very strange one, if i turn off the PSU with the switch at the back, wait for a few seconds, turn it on again..............i can boot up again with no problem whatsoever !!!!!!!!!!!!


VERY strange i think, its like the psu keeps somthing powered when 'shutted down' that prevents my system of 'seeing' my graphics card orso, i dunno....


any solution???
pls pst asap

thx
-Mordred-
 

A:A7n8x-x very strange problem, video

Need more info on your system
 

Read other 4 answers
RELEVANCY SCORE 39.2

First off, my PC specs:

AMD Athlon X2 4400+
BFG GeForce 7800GTX OC
2GB Crucial Ballistix PC3200
Windows XP Home

Problem I am having is that recently I have noticed in just about every game an issue with the graphics being sort of accelerated. For example, I was playing Planetside and noticed that any moving animation or a picture of someone walking or something would be speeded up, like in fast forward or something. While walking in the game I was teleporting, sort of like lag issues but the game was progressing at the same rate I was just actually jumping forward very fast and moving fast. Looking from third person perspective the animation of my character running was also in fast forward. This has been happening in a lot of games, sometimes causing them to crash. This is a brand new PC and so I am sure it is not a hardware problem, probably just some setting I need to change. Any suggestions?
 

A:All Games - Strange Video Problem

Can you think of any changes made before this happened?..
Update or install anything new?... Drivers maybe?

BTW, Just because it's new doesn't mean things can't go bad..
 

Read other 1 answers
RELEVANCY SCORE 39.2

I seem to have a very unusual problem with video streaming on my computer. Whereas all the other computers on my network stream videos fine, my laptop 'stops' continually whilst watching flash or quicktime videos. I have a very fast and reliable internet connection, and my laptop is high spec. I've tried everything from firewalls, antivirus, settings, I even have the same problem in safe mode.
Can anyone help? Thanks.

A:Strange problem with video streaming

Welcome to TSF....

Could we have some system specs on this laptop please include make and model and service pack installed?

What programs are you using for the video streaming process?

Read other 2 answers
RELEVANCY SCORE 38.8

I am having a problem just after Windows loads onto Desktop. It Seems that then my screen goes black but with a lot of squiggly differently colored lines and then a blue screen for a brief moment with a ton of code. The computer restarts itself at this point and goes through the same process. Now this exact problem does not end up in a restart always. Every three times of doing this or so it will do the lines and stuff but then go to my Desktop Screen but without loading the Speaker button and my Safely remove hardware icon on the bottom of the screen + Nothing will function if clicked on by mouse. Finally my monitor will say no display for about 5 seconds then it will come back and everything loads and is working fine.
I have tried numerous things such as reverting back to old Nvidia drivers. Checking all conections and reseating Video cards and Memory along with trying all slots available and each individually. I recently had installed Age of Conan 3 day early access. I had also just aired out the inside and dusted the fans on my video cards. And yes i was grounded with a good wrist strap and in the kitchen. Any help would be greatly appreciated. System Specs below:

P5N32-Sli SE Deluxe
(2) 7800 GT's in SLI
1 Gig OCZ DDR2 PC3200
(2) Hardrives in Raid 0

Chad
 

A:Solved: Strange video problem after startup

Solved After doing some more troubleshooting just ended up being a bad driver somehow
 

Read other 1 answers