upgraded to 2013
I told it to remove 2010 and install 2013
durning the install my nvidia drivers kept stopped responding. this problem stopped after office 2013 was installed and updated.
and later I found out my vmware installation was messed up and missing files. was working before.
what the heck happpend, I dont know..........office 2010 decided to take revenge? if it was going out . it was taking everyone out with it. lol
I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system
It's worked out well for many of us in the past.
You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)
Are you running Windows in your VMWare installation or is your WMWare installation on your Windows machine?
It sounds like (drivers aside) there were some shared filed that may have been wiped that VMWare was using that belonged to Office 2010.
We are wanting to up-grade our current Office suite Office 2003 to either Office 2010 or Office 2013. Our PC's are running Windows 7
I would just like to know what peoples opinions and advice is on this?
I can't speak to Office 2013, but I've done numerous upgrades to Office through 2010. When you install the new version, you have the option to keep the old version or just replace it. Starting with Office 2007 the familiar menu bar has been replaced with the ribbons which take a lot of getting used to for folks used to older versions. There's a little program called UbitMenu that will add most of the menu bar functions back in the 2007 and 2010 versions that a lot of folks find helpful. If you do opt to have two different versions installed at the same time, what happens is that when you switch from one to the other, it goes through a juggling act that takes a minute or so. It's a bit of a pain, but if you need it, it could be a convenience.
Any idea when Office 2013 will be available for download / upgrade?
it's in the Ms store already -- although IMO I'd stick to Office 2010 if I were you.
Anyway YMMV so here's the link (UK store) .
Microsoft Store United Kingdom Online Store - Office Suites
What you'd do to get the upgrade price I don't know but Office 2013 IS available for download. Try phoning / emailing -- actually a better option these days is to use a FAX believe it or not for this type of question. Emails tend to get lost as people have 100'000's to deal with, phone calls are diabolical --endless menu systems, loads of waiting and people on the other side of the planet who are incredibly difficult to understand.
The lowly fax machine when it chatters into life usually gets INSTANT attention these days . !!
Hi, hope someone can help me..
We have installed Office 2013 (64bit) on 13workstations, but found out that clients require Office 2010 (32bit) for some programs that are linked.
We removed the Office 2013 (64bit) and installed Office 2010 (32bit).
Everything looks okay up until we try to do Office 2010 repair process.
We are getting the attached error screen..
I tried Wiindows Installer Cleanup utility but i couldnt find any traces of Office 2013.
Hi majorbaluga, welcome to Windows Seven Forums.
Removing Office completely can be difficult. Refer to the website below. This explains how to remove Office 2013. You may have to remove office 2010 as well & then reinstall office 2010.
I just installed a copy of Office 2013 on a Pc (actually Win7) that already had Office 2010 on it. I was having problems getting an Exchange logon working and for some reason, upgrading to 2013 fixed the problem. I am working with 32-bit in both cases.
The copy of Office 2013 is working great. It noted there was a copy of 2010 there and copied all the information from the 2010, essentially doing an upgrade.
Now I'd like to remove the copy of 2010 and I'm wondering if that will destroy 2013 as well, somehow. The only strange thing I noted is I initially went into Mail-32 in the control panel to add the exchange logon and it added it to Outlook 2010 (sure, now it works on 2010...grrrh!), so I had to go into Outlook 2010 and remove the exchange account and then add the exchange account inside of Outlook 2013, which worked just fine.
So, I'm thinking if I uninstall Office 2010, then mail-32 will auto point to the 2013 version of Outlook. And I'd just like to get the 2010 version off anyway. But not if it's going to be a problem for Office 2013.
I've looked around the Internet and didn't find anything pointing directly at this situation. If leaving 2010 out there is the simplest solution, I'm OK with that. Thanks ahead of time.
I have been in the situation where I bought a new pc that had a trial version of MS Office 2010 already installed. I installed a full version of MS Office 2007 and uninstalled the MS 2010 trial version later with no problems.
This was a case where I had MS Office 2007 installed on my work computer and my company had a site license that allowed you to also install a copy at home. That's why I choose the 2007 version over the 2010 version.
well i just installed office 2010 and during install you get the option to click for the free Office 2013 download.
Office 2013 is far more interesting dan 2007 or 2010.
You've just installed or just boght and installed?
As you can see, are 2 different things.
On my husbands computer we are running Office pro 2010 on Windows 7.I would like to upgrade it to Office pro 2013. But in Outlook 2010 he has like 40 folders with subfolders full of emails. When i upgrade will Outlook 2013 grab all the settings, folders, emails and put them in correctly? I know office 2013 does not go onto of office 2010 because i did it on my own computer but i do not use outlook on mine, i use WLM so i do not remember what it did for outlook because i do not remember if i put an account in there after i installed it or not. I did mine months ago, call it a senior moment.
Does anyone here using Office 2013, did it as an upgrade and found all their settings, folders, emails, calendar and everything else get transferred into outlook 2013 correctly?
I do have a .pst backup just in case but sometimes when putting this back it messes up everything and i do not want to spend hours fixing it nor a divorce (lol) over this.
Oh also, i remember i got in program and features Office 2010 and office 2013, once i knew all was well i uninstalled office 2010, but then again i do not use outlook but for only one exchange account, and everything went fine with uninstalling office 2010, i am hoping from the answer you give me above, this would be the case here to?Read other 6 answers
I'm debating whether or not I should upgrade my Office 2010 to Office 2013? What's really the big difference between the two? Is it worth the upgrade?
Hi ShuwanShawn, welcome to Windows Seven Forums.
Have a look at these websites to give you an idea of the difference between Office 2010 & Office 2013.
What's the difference between Office 2013 and Office 2010?
Hello: I brought my MS Office to my new computer a few months ago. That version was/is 2010 on a windows XP. I now have the 2013 version of MicroSoft Office it is however the 64 bit version on a machine running windows 7 Home Premium.
I am concerned about losing my data over the transition.
I received the message that it is not possible to instal the 64 bit version until the 32 bit version is removed.
I would be very grateful if someone would provide guidance on the correct order and steps to accomplish this change over. The Data is backed up. I would not like to lose the Data in the various programs.
Thank You bats
Mother Board : Gigabyte Z77
System Type : x64 based PC
Intel Core i 7 -3770 CPU @ 3.5 , currently at factory overclock 3901GHZ
American Megatrends Bios SMBIOS 2.7
16 GIG OF INSTALLED Physical Memory
Samsung SSD 120 gig
1000 GB WDC HDD
I have uninstalled office 2010 few days ago and did a clean installation of office 2013.
But windows update is showing updates for both office 2010 and office 2013.
I have uninstalled office 2010 using Revo uninstaller so there are no traces
Am I missing something.
Why on earth do people insist on using these 3rd party uninstaller apps for BOG STANDARD Microsoft applications --Ms OFFICE is one of the most used pieces of software on earth so installing / uninstalling it should be a breeze via STANDARD uninstall method.
Had you simply uninstalled via control panel then the entire problem would not exist.
Your 3rd party uninstaller obviously hasn't done its job properly as there is still some indication on your machine that Microsoft Update thinks you still have Office 2010 installed.
IMO 3rd party apps are better left for NON OS type applications - things like installing / uninstalling / updating software should be left to the OS itself. Very few 3rd party apps IMO should be allowed to interfere with the internal functions of the OS itself -- even AV software - but that's another issue.
My solution here would be to either restore your syste to a time before you installed the "Uninstaller" app or re-install a clean copy of windows, re-install the version of office you want and apply the updates.
Note -- when Ms updates programs it might make all sorts of registry changes "on the fly" and it's impossible for a 3rd party uninstaller to be able to handle or even find all these changes.
Anyone know if it's possible to have Office 2010 (32 bit) and Office 2013 (64 bit) running on the same computer. (Windows 8 Enterprise 64 bit).
This link partially answers the question but doesn't say if you can mix 32 and 64 bit versions.
I have to keep EXCEL 32 bit as I have some addin's that don't work on the 64 bit version (EXCEL 2010).
I HATE outlook 2013 so the restriction on Outlook is fine by me. Mixing the 32 and 64 bit versions is my main concern here.
(Note you have to have office 2010 already installed to enable the "Side by Side" feature apparently -- not tried it yet).
Office 2013: Side-by-side or upgrade? | Jussi on SharePoint
Please posters who have actually TRIED this combination (on ANY version of 64 bit Windows 8). One often get posts like "It *should be possible*, or I don't THINK it will work. If you've tried this or can post me to an official Ms link saying it either works or doesn't work then I'd appreciate the help).
I don't actually like office 2013 -- I intend for all sorts of reasons sticking with office 2010 but there will be times when I have to run office 2013 and I really don't want to have to set up a separate Virtual machine just for that - or another Windows to Go system.
Here is one reference that might satisfy you:
"Compatibility with existing Office files and solutions
The 64-bit version of Microsoft Office isn?t compatible with any other 32-bit version of Office programs. So you must first uninstall all 32-bit versions of Office programs before you install the 64-bit version of Office."
I found another on Technet, but like a dummy I left the page, and, for some reason, couldn't find the reference again. It said 64 and 32 bit versions cannot be installed on the same machine.
alright guys I am in need of your opinion i have heard good things about both Office 2010 and 2013, but I am not sure which one is better, I can get both through my college, but I am just not sure which one would be best to use thanks guys i really appreciate it a lot
You better check into the fine points about the licensing terms.
Including these questions:
Can the product be installed on more than 1 PC at a time and are there any restrictions as to the type of PC: desktop, laptop, etc?
Is the product restricted to the first PC to which it is installed or can it be installed to any single PC in the future, without restrictions?
Do you get a factory-made retail disc or just a download of some type that must be burned to a disc?
Are there recurring fees, such as a monthly or annual charge? Or do you pay just once and never again?
It seems that Microsoft's goal in the long term is to drive everyone toward recurring fees, like a subscription that must be renewed for the software to continue to function. You can avoid that with Office 2010 if you buy the right type of license. I'm not sure about 2013.
And you need to understand which of the Office applications are included: Word, Excel, Access, Powerpoint, etc, etc. There are numerous packages with different names.
Functionally, you won't find major differences and can become accustomed to either.
I'd worry most about the licensing details.
I have MS Office Professional 2010 (Word, Excel, PowerPoint, OneNote, Outlook, Publisher, Access). I needed to install MS Project 2013 for a class that I'm taking.
Long story short, I now cannot use my 2010 stuff. The computer only recognizes 2013. (Would have been nice if I had gotten a warning when I was installing)
How can I get back my 2010 stuff? Do I have to re-install it? If I do, are 2010 and 2013 compatible or incomparable?
Upgrading to 2013 for everything is neither desired nor an option right now.
This article: http://office.microsoft.com/en-us/access-help/office-2013-known-issues-HA102919019.aspx?CTT=5&origin=HA103981695#_Office_%28release%29 should help you in uninstalling Office 2013 and fixing Office 2010.
As for having two Windows office versions on your computer SAFELY, you would need a dual boot system, one office version for each booting partition. You could create a third partition for all the files you save so you could easily access them from either booting partition.
Have a friend with a relatively new Dell Laptop running Windows 8.
She purchased the Office 365 Home Premium, which I believe she now has to pay for annually.
In the About section (at least in Word) it shows that it is a "Subscription Product".
A Google search for details about this are dizzying.
I'm not really looking to bash MS over this latest incident, there are plenty of others out there doing that for me. I'm just wondering if she can uninstall this version of Office and install Office 2010. Does MS allow these sort of moves?
She's a newbie and is taking a class that uses Office 2010 and would like to use the same apps at home as she does in class.
And if you're thinking about posting a "well, it's not that different, tell her to learn 2013"...please don't.
She is not a computer person, has no interest in becoming one and would simply like to get the most out of her class.
She has access to a legal copy of Office 2010 but I wasn't sure how all this works since there has been so much confusion about Office 365 and the annual fee(s) and transfer issues.
Anyone out there done this already or know if it can be done?
Thanks in advance,
I'm not really looking to bash MS over this latest incident, there are plenty of others out there doing that for me. I'm just wondering if she can uninstall this version of Office and install Office 2010. Does MS allow these sort of moves?... She has access to a legal copy of Office 2010 but I wasn't sure how all this works since there has been so much confusion about Office 365 and the annual fee(s) and transfer issues.Yes, you should be able to remove Office 2013/365 and then re-install the license/legal copy of Office 2010.This assumes that the license for Office 2010 is not already installed on some other computer (unless it is a license that permits installation on multiple computers).Read other 2 answers
Not sure what I did but I recently modified a document on our SharePoint and saved it locally. Now when I open that master document on SharePoint it opens the one I saved locally a while back and asks if I want to update the server. I've searched on various forums for a fix for this but have yet to find a solution.
How can I open these master documents on sharepoint without having it ask to update the server. I'd hate to accidentally save over the master document.
I'm using MS Office 2013, and SharePoint 2010.
I've checked the archives but can;t find a relevant thread.
I currently have Office 2010 Pro on my laptop and am going to be purchasing MS Project. But am unsure which version is the safe bet.
Can I install Project 2013 on a laptop running Office 2010 or is that going to be a problem and I should stick with Project 2010?
I don't need the latest and greatest version of Project so for my functional needs Project 2010 will be fine, but I figured if I am going to buy it might be best to get the latest version?
Note: I did find something on another forum about Project 2013 using Sharepoint 2013 and that conflicts over-writes some sharepoint 2010 executables thereby causing issues with 2010 suite ... but I don't have Sharepoint on my laptop so doubt this is an issue in my situation.
Anyways whats the safest bet, I really don't want to deal with conflicts or software issues. Stick with Project 2010?
Office 2010 is the first to be available as either 32-bit or 64-bit. I had to uninstall Office FrontPage 2003 [32-bit] before I could install the 64-bit version of Office 2010. I would imagine the same would hold true for all Office applications.Read other 9 answers
I have a qualifying copy of Office 2010 Home and Small Business.
Recently I just claimed the offer. But how about the old copy? Will it be invalidated instantly if I install the 2013 version? I'm not sure if I will like my 2013, so would like the ability to go back to 2010 if possible.
I'd be a bit wary of Office 2013. I read that Microsoft has changed the licencing so that Office 2013 is licensed for a single PC only and that the license may never be transferred. Which means if you upgrade or buy a new computer, you need to buy Office again!
Here you go:
Microsoft: Office 2013 license is for just one PC, FOREVER ? The Register
I'm the IT Manager for a small, non-profit. I need roughly 35-40 licenses for Office, or an Open License that allows that many installs. In years past, I always purchased these things from TechSoup. However, we are no longer eligible. We are a 501(c)5, and organizations like TechSoup only give discounts to 501(c)3.
Microsoft's website directed me to several vendors, but they either tell me we're ineligible (given our charitable status) or they give me an outrageous quote, especially for our size non-profit. Dell, for example, quoted me $13,326 for 40 licenses.
Am I completely out of other options? Back when TechSoup still considered us eligible, I was able to buy a volume license key for Office 2007...same key for every install. Is that still an option, because it seems like Dell is just giving me 40 "off-the-shelf" licenses, aka 40 keys.
I'm frustrated, because I can't believe a non-profit this small would have to pay that much.
If you are dealing with that tight of a budget, might I suggest you consider switching to Apache Open Office. Functionality is pretty much the same.Read other 6 answers
We have an upgrade on our computer units here in the company, my problem is when users save their 2007 excel files an error pops up, Errors were detected while saving "File Name". Microsoft maybe able to save the file by removing or repairing some features. To make the repairs in new file, click Continue. To cancel saving the file, click Cancel.
By the way, the files were save on the file server and users access them through single roaming profile that we created with full access on their folders.
i am hoping i could find an answer.
i have many views, but no reply... i am starting to think this forum is not helping me !...Read other 2 answers
A charity is considering upgrading its workstations to Office 2013 from Office 2007.
They have lots of files in the .docx, .xlsx, .xlsm, and .xltm formats that they would need to access on a daily basis.
- Would the upgrade cause compatability problems with working with files created under these above formats?
To my knowledge, they should not have any issues.Read other 4 answers
Solved, remove pleaseRead other answers
I plan to update Office Pro 2003 to Office 2013 with Outlook. I need some Advice on how to move all of my Outlook info in 2003 to Outlook 2013.
Thank you, Richard
Read other 6 answers
OS: Windows 8.1
Office Version: Professional Plus 2013
Every office application I open seems to have a classic unthemed title bar and not maximise correctly. When opening an office application a number of things happen:
The application opens behind any open windows
The application when maximised appears to be open full screen with in an invisible frame
Drop down lists within the application instantly close when clicked on
Here are few images showing what I mean:
Steps taken to try to rectify the problem:Reinstalled Office after having used Revo Uninstaller to remove any left over traces
Rolled back to a time I don't believe the problem existed, thought this may have existed from the start but never realised due to lack of use
Reinstalled Graphics Card drivers
Turned off any OS resizing options
Tried changing the OS theme back to default
Tried changing the screen resolution
I should also mention that this only affects office applications and no other applications seem to have any issues like this.
I know I can get around the issue of it being maximised, as can be seen from the screenshot. The issues with dropdown boxes etc is a pain, any help you guys can give would be appreciated
Have you tried an Office repair. This is how to do it with Windows 7, Open Control Panel, select Programs & Features, scroll down to Microsoft Office 2013 & Right Click on it & select Change & this will show a couple of Repair options to try. Windows 8 might be different as I haven't tried it.Read other 2 answers
Office 2016 Installation Routine Deleting Older Stand-alone Apps
I can't say I wasn't warned. I was part way through installing Microsoft Office 2016 on my primary workstation when I got a message that said, "Stop, you should wait to install Office 2016." The error message went on to say that if I decided to continue anyway, my copy of Microsoft Visio Standard 2013 would be removed. Since I had the original disk from when I purchased the software, I went ahead. Bad move. It turns out that when Microsoft says that Visio 2013 won't work with Office 2016, it means it won't even have the chance to work. Any attempt to reinstall the software will be thwarted. The fact that you paid for the software is beside the point. You're basically out of luck. When I went to the Microsoft community forums, which is where Microsoft handles much of its tech support, I discovered that I wasn't alone. Apparently hundreds of people who'd purchased stand-alone Microsoft Office products were affected, and they weren't happy about it.
Furthermore, the problem extended far beyond Visio. Users with Microsoft Project, Publisher, Access, InfoPath and SharePoint Designer were also affected. Likewise, Microsoft customers who purchased Office Apps that are normally part of Office suites but may have been purchased separately, such as Outlook 2013, were also affected.
Office 2016 Installation Routine Delet... Read more
Hi, is there any way of backing up all email accounts in Outlook 2013 (including username+password) and restoring them in Outlook 2016 without having to manually recreate the accounts? Thanks
You didn't say what types of accounts they are, but mostly likely there isn't a way, unless there is a third-party tool or these are Exchange accounts.Read other answers
I don't know if maybe I'm the only one who runs into this problem or if it happens to a lot of people, but it seems to come up a lot for me.
I have had this issue on many computers but right now I am setting up an old Dell Latitude E5510 for an employee and I have reformatted, installed all drivers, and programs needed. I installed Office 2007, because this employee won't really be using the computer much.
I start up Windows Updates today and it has me downloading 3 updates for Windows 2010. This computer had Office 2010 on it before it was reformatted. Is it still sensing Office 2010 buried somewhere in the files and that's why it's asking me to install updates for it? Does Office 2007 use updates that are also made for 2010(and are only labled 2010)? Anyone have any ideas? I don't believe it's hurting anything, but I am curious!
I get those type of updates for my Office 2003. There are some later updates that can be applicable. For example, I installed a converter that lets me open later MSWord formats (2003 is doc) and now I get updates for later Office versions.Read other 2 answers
It seems that there may be a problem in Office 2010. I just installed it to the standard MS default/recommended settings .........all looked good...used Word great..until I use Excel and each time I try to use excel it sets off an 'Office Configuration' screen which I can not stop..it take a few minutes and then loads OK. I tried to launch it from the installed prgrams icon but there is no files on 'start in' etc..I tied to create a shortcut to the desktop from the excel.exe file and get the same reconfigure issue..it seem that somehow I don't have either permissions or I have a corrupt install..all Office suite works eventually Anyone know how to fix it..please?
Have you ever had a previous version of Office on this copy of win7?
Do you have any component of a previous office suite installed still
I have seen this in the past with Viso that was due to remnents of an earlier trial remaining on disk and in the registry.
I also found that if I cancelled the configuration screen the Viso would load without problems without the need to wait for completion.
There are some rather involved solution stems on Microsoft website - cannot find them at the present but will try to look for them.
The problem was that I could never get the removal steps to actually cure the issue and I put up with the error until my next re-install of Win7, which was not to long in the case of that system
I am running Office 2013 on a cleanly installd SDD that has only ever had office 2013 installed on it. Any idea why windows update is giving me Office 2007 updates, specifically
I should decline these, right?
No don't decline these updates.
Office 2013 updates in the background & does not show up in the usual Windows Updates section. I am using Office 2013 Pro & I have it set for installing updates automatically.
It would be best just to let any updates that are required to be installed. Often certain updates are incorporated to cover a few versions of Office as they earlier ones need it so they incorporate it to cover all the applicable versions, which may also include later versions.
Therefore just leave it alone as fiddling with updates often causes trouble. Also it is just a whole lot of unnecessary work for you.
Just bought a new laptop with Windows7 64bit installed-my first exposure to Windows7. I had Office 2007 installed on my old Dell 32 bit machine. I had also recently pruchased Office 2010 and installed that on my new machine.
Now, when I try to open those 32bit 2007 files with 64bt 2011, Iget an error message that "no picture file is available", or words to that effect. When I try to "open with", the only option displayed is "Microsoft Office" with an icon that looks like a picture file. When I try to browse to the proper office program(Excel, for example), there are none of teh Office suite programs displayed, only "Microsoft Office".
I can navigate seperately to the proper progran, Excel, etc., and drag the file into the application, and it opens, and all seems to work OK. I "save as" the proper application file, but it still will not open with double-click on the file name.
I have not seen this particular item in the forums and would appreciate very much some help in fixing this issue.
Hello Grubby76, welcome to the forum.
We have an excellent Window 7 File Association Tutorial here:
Open With - Change Default Program
I'm running Windows 7 on my new computer, which came with a trial version of Office 2010. Rather than buy the full version when the trial expired, I installed the Office 2003 I had on my old -- now dead -- computer. I now find that I can't open the Word and Excel files I created with the 2010 version. Is there a 'cloud' site where I could send the 2010 files and have them returned to me as standard .xls and .doc files? Or is there a free converter available for download?
Read other 7 answers
My MS Office files have generic icons, and when I open them, Windows asks me which program to use. Office 2010 isn't even on the list. A trial version of Office 2007 came with my laptop. I downloaded the Office 2010 beta, then uninstalled 2007. Since I uninstalled the old Office, all my Office files are no longer associated with Office, and there seems to be no way to remarry them. Office 2010 (beta) doesn't appear in the default programs control panel. The only way I can open those files is to open Word/Excel/etc, and File>Open. I feel like this should be simple. Any ideas?
Did you uninstall 2007 after you installed 2010?
If so you messed things up and you need to do a repair. Open Word, then the Office button, and then Word Options.
There on the Resources area, run diagnostics and do a repair.
Okay, I've never posted on anything like this before so bear with me please. I've got an issue and it's driving me nuts because I can't resolve it. I'll try and give a description of what I did. Any help would be greatly appreciated!
I purchased a new Dell computer (Windows 7 Home Premium 64bit) that came with a trial version of Office 2010. I had previously purchased an Office 2010 Pro so I wanted to install the full version on my computer. When I did, I had both versions installed, so I uninstalled the trial version. That's when I think my problem arose, but I can't say for sure that it didn't exist before that because I hadn't even looked.
Here's the problem:
When I'm in Windows Explorer looking at my files, my Excel and Word files (.doc, .docx, .xls, .xlsx) show up with an improper file type description. Instead of saying "Microsoft Word Document" or "Microsoft Excel 1997-2003 Worksheet" (or whatever they're supposed to say) the simply say "DOCX File" or "XLS File". Not only that, but the icons don't look right either. They sort of look right, but they're smaller and sort of greyed out (Except the .docx icon is just a white page with lines object).
The strange thing is, is that ALL my other Office files show up with correct descriptions and icons etc. (.ppt, .pptx, .csv....etc - ALL of them!)
What I've tried to fix it:
I uninstalled all Office Products and then reinstalled Office 2010.
I tried MS's little bug finder pr... Read more
Welcome to SevenForums.
If you right-click on one of your Word documents and choose properties, does the icon look correct in that panel? Like this:
Good Evening Everyone,
I have a few questions concerning the Installation of 2010 Office. I know that I have to uninstall Office 2007. I have no clue on how to save or where to save my documents from Office 2007. The documents consist of Word, Excel, Powerpoint and a few various folders. Should I from the Start Menue click on Documents select all and copy. Where should I place this copy? Can It be left on my hard drive? After I install Office 2010 can I then copy the "Document File" and place in Documents. Will all the files end up in the proper place for their programs, Word files go to Word, Excel goes to Excel so on and so forth. Thank you so much for all your help and cooperation. It is greatly appreciated. I hope I described my situation correctly. I look forward to hearing from you.
But you don't have to uninstall Office 2007 to upgrade to 2010. That's the general rule as you can generally upgrade from lower SKUs to higher SKUs (Small Business to Pro Plus). As far as saving your documents, you can really save them wherever you like on your hard drive or on any CD or flash drive if you wish to do so. As far as file types, after 2010 is installed, they should all register properly for their programs so that Word documents open in Word, Excel Documents in Excel, etc.
Though if you have all of you documents already saved within "Documents" or "My Documents" or some other folder you've set aside and you want to uninstall 2007 before upgrading to 2010, the documents themselves will be retained when you uninstall, you just won't be able to really do much with them until you install 2010.
i remember with windows xp and office, you could go to a different part of the microsoft windows update website in Internet Explorer, and it would prompt you with ActiveX to allow updates for Office, and after you did that then when you went to the normal windows (xp) update site there would be a whole other section of updates for microsoft office available. That was with office 2007 anyway.
i use a dell restore cd for windows 7 professional, on a dell pc obviously, to install win7 from scratch.
I can do windows updates no problem.
I have microsoft office 2010 professional plus with a valid license key, these are provided by my IT dept.
Office installs fine, during the install i can go through the options and install excel, powerpoint, all shared tools, and so on. Once installed, it works fine. There is no service pack installed at this point.
From here if I go windows update, I never see anything for office.
From within office, Microsoft Word file menu help for example, it shows office is activated and if i click on check for updates there it then opens an IE window which says updates can be done from start menu - programs - windows update. If i do that, it's a normal windows operating system update and I get nothing for office.
I have manually downloaded from microsoft, Office 2010 SP1 and SP2, and have installed either one.
When i go to the help menu it then shows office 2010 SP # so the service pack seems to have installed no problem. But I still never see any upd... Read more
You mean what's called Microsoft Update. If you go in to the settings in Windows Update, do you have this checked:
I have Office 2013 Pro Plus, but the click-to-run version which updates itself and is not part of Windows Update. But I don't think there's a click-to-run version for 2010 Pro Plus so that is probably not the issue here.
When I first got my computer (Windows 7 Home Premium SP1), it had a preinstalled trial version of Microsoft Office 2007. I removed it via the control panel (Programs and Features) and installed Office 2010. However, I still get Office 2007 updates via Windows Update. They even installed successfully.
There are no Office 2007 components listed under Programs and Features.
Why am I getting Office 2007 updates although I've got only Office 2010?...
This should help:
How do I uninstall the 2007 Office suites if I cannot uninstall it by using the "Add or Remove Programs" feature?
I did an upgrade installation from Office 2003 PRO to Office 2010 PRO. I had several issues with Access denied on C:\Config.msi. I usually select retry and all is well. I think I may have missed one of the retries before I did the system restart.
Now I get an error 2203 whenever I reboot, and the Office 2003 installer keeps popping up anytime I try to do anything.
I tried uninstalling Office 2003 and was told that I had a corrupted install. I tried re-installing it and it seems to just hang.
I also tried to uninstall and repair Office 2010.
I'm at a loss at this point.
Do a restore point to before you installed office 2010. then uninstall the office 2003 and do not upgrade.Read other 3 answers
I am running a copy of Office 2007 Ultimate that I got through an academic program. I need to install a key for Office 2010 on a new system. The cost for the key only is about $20 less than a 3 license traditional disk version, so I am considering upgrading every system.
However, I don't want to lose MS Access or MS Publisher to upgrade.
If I install Office 2010 Home & Student over Office 2007 Ultimate, will the extra programs from Office 2007 still be available to me? I know they will not be upgraded, but having a few different versions floating around doesn't bother me.
No... those two programs are not available in the student version...Read other 3 answers
I have Office 2010 Standard Open License Version installed on 7 XP Pro machines. We discovered, when trying to open a .tif file, that Document Imaging has been removed from Office 2010. I found and followed instructions in KB982760 from the MS web site. I got lots of parts of Office 2007, including Word, but still no Document Imaging. I tried going through Add/Remove Programs to add the feature; still no luck. Has anyone been successful getting Document Imaging from a previous version of Office to run under 2010?
Hey guys, my wife is taking a course that requires her to install Office 2010. The issue is that she wants to preserve her current setup which includes Office 2003 and 2007 existing side-by-side on her Windows 7 (64-bit Home Edition) notebook.
The 2003/2007 setup is not one that she really wants to mess with (i.e., she has no interest whatsoever in uninstalling the two Office suites that she currently has), so ideally she would like to have Office 2010 installed temporarily (for the duration of her course) on the machine without interfering with the current setup.
What is the most painless way of doing this that does not involve shelling out for a second computer?
Hi, welcome to the forum,
I had a similar situation here but in the end I opted out.
I removed both Office 2003 and 2007 and installed 2010, I then used virtual XP and installed 2003 there, 2007 and 2010 are too similar and the dll's will 'bite' along the way.
Even my 2003 and 2007 gave me issues after some time.
Have you checekd what the Microsoft Support site says?
Having upgraded my desktop PC to Office 2010, I need to import three seperate letter template files for use in Word. These were lost during the upgrade but are on my laptop, which still runs Office 2003, as .dot type files and I also have them copied to a memory stick. However, I am at a loss as to how and where to save them into the new programme on my desktop PC. If it makes a difference, I should add that I do not use Libraries and have disabled them.
Can anyone advise please?
Problem solved - with a bit of advice from a friend! Unsurprisingly, it's very simple.
- Open the document in Word
- Click "Save As"
- Scroll to top of folder list and, under "Microsoft Word", click "Templates"
- Name the template and select "Word Template" in the "Save As Type" list
- Save it
I still don't know where they are saved to but I can now call them up and use them.
My PC OS is Windows 7 Pro and I am using Office 2003
I want to install Office 2010 on it.
I don't want two Office programs but I do want to keep My Doc's etc in the new Office 2010.
What is the procedure?
Hi fred93 The documents you created with Office programs aren't related to it. You can simply uninstall Microsoft Office 2003, and install Office 2010 and you'll be able to use them again. Simple as that.Read other 7 answers
Am not sure what to do with these updates:
Update for Microsoft Office 2010 (KB2553181) 32-Bit Edition
Update for Microsoft Office 2010 (KB2553310) 32-Bit Edition
Update for Microsoft Office 2010 (KB2553455) 32-Bit Edition
Windows Updates says they are important.
I do not have Office 2010 installed. Office 2007 is installed.
My security software keeps telling me I am at risk because my operating system is not up to date.
Any thoughts on what I should do?
If your computer is relatively new, it may have come with a trial install of Office 2010 - check the Start menu, and the Programs & Features listing.
You may also have installed Viewers for things like PowerPoint 2010, which still require updates.
it's possible that Office was installed improperly, i cannot open any other non Windows app, they all open to Office Word. is this a virus?
System Restore opens to Office, Control Panel works normally. How can I fix this?
Is this a legally liensed version of MS Office?
Sounds as if you didn't install Office...who did, in that case?
When was Office installed?
System manufacturer and model?
I recently installed the Microsoft Office 2010 Beta, but this morning its intro screen stays stuck at "Starting Microsoft Office Click-to-Run." Googling it resulted in only two threads, neither of them having the answer.
I'm back to using Office 2007, by simply setting my Word and Excel documents to open by Office 2007 by default, but now my Word and Excel icons have become much less pretty, such as my Word icons becoming a very plain "DOCX" icon instead of the normal "blue W" icon. I checked, and the file types are still regular Word documents. Is there a way to get the pretty icons back?
Regarding changing the icon:
Go to either My Computer or Windows Explorer.
Click Tools, Folder Options, File Types tab.
Scroll down to the DOCX file type (file types are in alphabetical order), click on it one time to highlight it.
Click the Advanced button.
The "Edit File Type" screen appears.
There is a Change Icon button in the top right area.
Click the Change Icon button.
You should have other icon choices to pick from.
Side note: If you don't like any of those icons, you can always hit the Browse button,
and browse to where other icons are, (you can assign any icon to any file type that you want, it is a matter of personal preference).
Icons are found in .exe files (executables), some (not all) .dll (dynamic link library) files, and .ico files.