Over 1 million tech questions and answers.

Fix for System Restore error (0x800700B7) for Setting Manual Restore Point

Q: Fix for System Restore error (0x800700B7) for Setting Manual Restore Point

System info:Windows Vista Home PremiumeMachine T5226Intel Pentium D CPU 3.00GHz4 GB RAM32-bit OSAll of a sudden, I went to set a manual Restore Point and I get the same message:"Could not create the Scheduled Task for the following reason:Cannot create a file when that file already exists.(0x800700B7)"I can change the name and still get the same pop-up, I have nearly visted all forums and tried everything, except pay MS $35 for the fix,which I cannot afford to do and buy medicine, since I am disabled and Part D Medicare for drugs is Bad.Can Anyone who really knows a fix, other than just reinstall and go through all, that, it seems to set points when programs call for it, but not the operator. Any help will be appreciated and rewarded by God, through my prayers. Thanks!

RELEVANCY SCORE 200
Preferred Solution: Fix for System Restore error (0x800700B7) for Setting Manual Restore Point

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Fix for System Restore error (0x800700B7) for Setting Manual Restore Point

Hi,
 
Thanks for posting in Microsoft TechNet Forum.
 
Based on my experience, error code 0x800700B7 indicates that the object cannot be created because an object with the same name already exists. Thus I suspect there is some shadow restore points stored on your computer. I recommend that you perform the following steps.
1. Change another location to save the new created restore point.
2. Resize Maximum Shadow Copy Storage Space by running the following command, there may be caused by limited space.
 
1) Click Start, click All Programs, click Accessories, and then right-click Command Prompt.
2) Click Run as administrator.
3) At the command prompt, type the following command, and then press ENTER:
 
vssadmin list shadowstorage /for=c:
 
4) Note the Maximum Shadow Copy Storage Space value.
5) At the command prompt, type the following command, and then press ENTER:
 
vssadmin resize shadowstorage /for=c: /on=c: /maxsize=300Mb
 
6) Close the Command Prompt window.
 
Hope this helps. Thanks.

Read other 10 answers
RELEVANCY SCORE 122

I am having difficulties with this.
1. Does Win 7 limit the quantity of past restore points it shows upon user request?
2. If stored elsewhere where do I find them?
3. Is there a way to set it up to show at least the last 10 restore pointsd created, or is there a smaller limit.
Right now the one and only restore point that is available is the last one. So it is like a revolving door every time a new restore point gets created, the previous one gets dropped and does not show any longer.

Given my limited competence with computer knowledge please post answers in layman terms as in Step 1.. 2 3. type.

I would appreciate help over this.

Thank you kindly

A:System Restore how to set to show every past restore point inc/manual

Hi
I believe that if you go to Backup and Restore (Start button, type Backup in the search bar at the bottom of the start menu), then click Restore button, on the screen that pops up is a blue link that says "Choose a different Date".. This will then allow you to select which backup you would like to recover your data from..

Is that what you are looking for. Apologies If I have mis-understood you.

Read other 7 answers
RELEVANCY SCORE 110.8

Recently, I've discovered that my system restore does not work. I thought it was due to errors with the specific restore points that I'd tried, but it also failed with a test restore point I'd created. The error can be found below.

I would very much like to fix this issue before the fate of my computer gravely depends on it. Any help would be appreciated.

A:System restore fails with 0x800700b7, error extracting

Temporarily disable Avast & Try what I suggested in this post:
system restore not restoring

Read other 2 answers
RELEVANCY SCORE 109.6

Recently, I've discovered that my system restore does not work. I thought it was due to errors with the specific restore points that I'd tried, but it also failed with a test restore point I'd created. The error can be found below.I would very much like to fix this issue before the fate of my computer gravely depends on it. Any help would be appreciated.

A:System restore fails with 0x800700b7, error extracting files

 In doing a search on the MS web site, I found this:
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/an-unspecified-error-occured-during-system-restore/59cfdf5b-4fa8-4efa-8bdd-e5f6fdf0116c?auth=1
 It says there's a conflict between your security software and System Restore.  One quote from one of the MVPs is "if your computer has Norton Antivirus or Norton Internet Security, you must turn off Norton Product Tamper Protection before running System Restore."
 
If the above doesn't solve the problem for you, Please download and run Speccy.  After running it click File -> Publish snapshot... Copy and paste the link it gives you into your next post.
 
 Then download minitoolbox and run it with the following boxes checked:
 
List last 10 Event Viewer Errors
 
List Installed Programs
 
List Users, Partitions, and Memory size
 
List Minidump files
 
Copy the resulting log and paste into a reply here.

Read other 4 answers
RELEVANCY SCORE 109.6

My OS is Vista Ultimate. 2GB RAM. 13GB free space on C Drive. I am unable to use System Restore or Backup and Restore center. When I try to create a Restore Point (or do a backup) error message comes up 'Could not create the scheduled task for the following reason: Cannot create a file when that file already exists. (0x800700B7).' I think (not sure) that these problems came after I was infected with win32:Vitro virus. (No longer any infections showing). I think that my registry may be corrupt or files deleted. Can anyone help please?

A:Error code 0x800700B7 with System Restore and Backup problems

Hi,
 
Thank you for your post.
 
Based on my research, I would like to suggest the following:
 
Note: Please perform a complete system backup first. If any unexpected issue occurs, we can quickly restore the system to the current status.
 
1.     Click Start, type regedit in the Start Search box, and then click regedit in the Programs list.
 
If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
 
2.     In the navigation pane, locate and then click the following registry subkey:
 
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache
 
3.     Right click on this key and select "Export" and save the key to a Flash Drive or other removable storage device.
 
4.     Remove the key ?HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows?
 
5.     Please reboot the computer and check if the issue reoccurs. If it works, please also reconfigure the Scheduled Task for System restore in Task Scheduler.
 
Hope this helps. Thanks.Nicholas Li - MSFT

Read other 12 answers
RELEVANCY SCORE 108

Hello: I'm running Vista 32 bit, and am having trouble creating a manual system restore point. I have gone to System Protection unchecked drive and restated computer. I then went back checked appropriate box and attempted to create restore point. During processing an error box appeared and stated restore point could not be created, due to shadow box provider had unexpected error while trying to process operation. (0x8004230F).

Also I use a 500gb Passport to back up my Documents. When I right click on Document and click send to, Passport no longer is listed. I checked My Computer and it shows Passport there? This past week I downloaded AVG PC Tune Up and optimized my computer operation, I'm wondering if perhaps some of the computer settings were changed during this process?

Thanks in advance for your help. Paul

A:[SOLVED] UNABLE TO COMPLETE MANUAL SYSTEM RESTORE POINT

Hi see the info here Vista Application Error 4100 (0x8004230F)

Read other 6 answers
RELEVANCY SCORE 105.6

Hi guys,

I'm a newbie on this forum and this is my first thread. I just tried to create a restore point and ended up with this error:

Any help would be much appreciated.

A:System Restore- restore point creation error

By chance did you have a virtual machine running when you tried to create the restore point? If yes, try creating restore point without VM.

Read other 5 answers
RELEVANCY SCORE 104.4

How do you set a system restore point in Windows 7. All I can find is how to restore from one.

Thx
 

A:Setting System Restore point in Win 7

start > run > sysdm.cpl > system protection tab.

thanks,

v
 

Read other 3 answers
RELEVANCY SCORE 104.4

i 870 cpu, 750 gig hd. 64 gig ssd, MSI P55-GD80 mobo...I have the os on the 64 gig ssd. My system is not setting restore points unless I uninstall and/ or install. Sets points on MS update. I go i n and create a restore point and the next day, it is gone. Have 1 per cent of this ssd set as max usage, 690 mb. Any help appreciated. I have system restore turned off on the 750 and turned on on the ssd, where the os is.
Bill
 

A:System Restore not setting point...

How much space do you have left on your 64GB SSD?
 

Read other 2 answers
RELEVANCY SCORE 98.8

My comp has been experiencing several problems and is running poorly. I bought an external HD, completely backed up everything important and was about to run a system restore as I had created a manual restore point following the resolution of previous problems. The link to the thread is found below.

However, when I use the system restore wizard, I can only select November 8th, 9th, and 10th...and today is the 10th. I created the manual restore point back in March 2006. I cannot change the month and I have no idea where to find manual points.

Could someone please help me find the restore point I created when my computer was working perfectly?
http://forums.techguy.org/malware-r...s/453201-solved-persistent-spyware-virus.html
 

A:Solved: System Restore: Finding Manual Restore Points

Read other 8 answers
RELEVANCY SCORE 97.6

I am using XP Home Edition. I want to restore my system to one of my manually created restore points from a few months ago, but the calendar won't let me go out of the month of June, to a previous month. How do I get there? Thanks. I downloaded a popup blocker, restarted my machine, and lost all contents of Outlook Express.
 

A:Manual restore point XP

If you can't get past June, then you may be able to get it.

See this link ( http://support.microsoft.com/default.aspx?scid=kb;en-us;307545&Product=winxp ) mostly part 2.

However, If all you want to get back is your Outlook Express files, then do a search for "*.dbx" [without the quotes] and they should still be there (you will get inbox.dbx, sent.dbx, etc.). When you find them, just import them back.

You may have double inbox.dbx, etc.. so you may have to use trial and error when importing to find your old files.
 

Read other 2 answers
RELEVANCY SCORE 97.2

I'm trying to do my normal system image and data backups with Windows Backup and Restore, always worked fine until now. I am getting "The backup application could not start due to an internal error: Server execution failed (0x80080005).

Then i go to Services to check if the required services were started and Block Level Backup Engine Service is not. I tried to manually start it but then i get the other error code (0x800700b7), really need help on this guys.

A:Windows Backup and Restore error 0x800700b7

Hmmm... This is apparently an old and well-known problem. If you navigate your file structure like so:

And then delete the SR (system recovery) task, you apparently have 50-50 odds that your error code will disappear. But if you do this, you'll have to (re)define your normal backup task definition.
Please let us know how this turns out.
Thanks, and HTH.
--Ed--

Read other 2 answers
RELEVANCY SCORE 96.8

Is this possible, if yes, how?

My manual created restore points get deleted at random. Sometimes they will still be available after weeks. Sometimes they just dissapear for reasons unknown to me. The last one dissapeared within 9 days and I'm now trying to figure out when this last restore point got deleted and for what reason. Can you help?

A:Want to know what deleted my last manual restore point (w7 x64)

I would imagine it would depend on how much drive space you have allocated to system restore.

What should happen is that when the allocated drive space is full, the oldest restore point will get deleted.

Don't forget also that Windows security updates will very often create a restore point, which can affect the frequency with which restore points get deleted.

System Restore: frequently asked questions

Read other 5 answers
RELEVANCY SCORE 95.6

My Lenovo T60 crashed and was not able to be repaired. I do not know what caused my laptop to crash, but according to the PC Tech, the hard drive was reformatted. To be honest, I am here in the Philippines and did not bring my recovery disks with me & I am not so sure about the technical ability of the PC Tech.

That being said, he installed Windows XP Professional on my laptop and partitioned my hard drive. I have a 250 GB Western Digital HD. Before my laptop crashed, the drive was NOT partitioned. After the installation, I now have two drives, C, with 40 GB and D, with about 200 GB.

I lost a lot of photos and music, and other important documents. I decided to try to recover some of these files and used Recuva. The good news is that a lot of missing documents can be recovered. While listing the files and looking at them, I noticed that I had several System Restore points that I can recover.

My question is, can I use the most recent System Restore point that I recover and use that to reinstall all the missing software? I had MS Office 2007 Professional, MS Visio 2007, MS Project 2007, and other software that I do not have the installation disks with me.

From what I have read, System Restore will reinstall the system (registry, files, and software only) and not the My Documents folder.

If this can work, where do I put the system restore file? If need be, I can delete the new partition and resize the C partition, restore, and then repartition the hard drive afterwards.
... Read more

A:Can I use a recovered System Restore point file to restore missing sw crashed laptop?

Since you already lost everything, try the System restore but first backup everything Recuva found onto a USB key. If your version Windows was not the same what the tech installed, it might not work. Also, he should have first ask you what to do with your files before formatting.
Otherwise you will have to wait till you can re-install everything.
 

Read other 3 answers
RELEVANCY SCORE 95.6

Hi,

I have Win XP SP2 and I am trying to manually create a restore point before I load on IE7 standalone.

I have been to
Start->All Programs->Accessories->System Tools->System Restore.
but there is only a restore option on the screen, there is no 'create a restore point' option.

I have obviously set something somewhere that disables this, can anyone tell me how to get this back please?

Thanks,
Paul
 

A:Manual run of create restore point missing.

Hi there,
This may help

http://www.5starsupport.com/faq/xp-system-restore.htm
 

Read other 2 answers
RELEVANCY SCORE 95.6

When I start with a vlean slate (that is deletion of all restore points and create 1 manually after virus-scanning). This Restore point grows pretty fast. Starts with 72MB and grows to 140 MB wihtin 2 hours. 1 Gb within two days. What could be the reson?

I have 1 500GBsystem harddrive and 2% reserved for System Restore.

A:Manual restore point growing too fast?

Check how many restore points those really are. The cmd command is vssadmin list shadows

I suspect there are more than 1 restore points. But it does not matter. The shadowstorage works first in, first out.

Read other 6 answers
RELEVANCY SCORE 95.6

My questions are on Windows 7 System Restore, Restore Points and Backups; specifically, potentially using a Backup as a Permanent Restore Point.

Here is the situation...

About a month ago, I did a complete Factory Restore on my HP desktop and returned it to it's factory condition. After removing the bloatware and performing all the necessary Windows Updates, the Factory Restore process went off without any issues.

Today, however, I needed to use System Restore due to an issue I was having with multiple monitors that I just couldn't figure out. So, I went into System Restore and found a "Date andTime" of a restore point that was right around the same time I did the Factory Restore. That Restore Point was also the oldest and since I knew it was a known & good restore point, I decided to use it. That restore point "Description" was labeled "System Image Restore Point" and the "Type" was labeled "Backup." (See Image)



I don't recall setting up or doing any backups although, between Windows Backup, Norton Backup and HP's Backup utilities some type of backup obviously happened. FYI, I hate having all those options, as I'd rather use native Windows tools. In any case, today, I used the System Restore using the System Image Restore Point labeled as Backup and, after performing a few minor Windows Updates, everything went off without a hitch and my monitor problem was solved.

However, seeing that Restore point b... Read more

A:Windows 7 - System Restore, Saving a Backup & Permanant Restore Point

ad 1) restore points are in the shadowstorage

ad 2) yes they are overwritten when the shadowstorage is full. You can set the size of the shadowstorage with vssadmin

ad 3) for permanent backups I suggest imaging. There you control the images yourself.

Imaging with free Macrium

Read other 3 answers
RELEVANCY SCORE 95.6

My questions are on Windows 7 System Restore, Restore Points and Backups; specifically, potentially using a Backup as a Permanent Restore Point.

Here is the situation...

About a month ago, I did a complete Factory Restore on my HP desktop and returned it to it's factory condition. After removing the bloatware and performing all the necessary Windows Updates, the Factory Restore process went off without any issues.

Today, however, I needed to use System Restore due to an issue I was having with multiple monitors that I just couldn't figure out. So, I went into System Restore and found a "Date andTime" of a restore point that was right around the same time I did the Factory Restore. That Restore Point was also the oldest and since I knew it was a known & good restore point, I decided to use it. That restore point "Description" was labeled "System Image Restore Point" and the "Type" was labeled "Backup." (See Image)



I don't recall setting up or doing any backups although, between Windows Backup, Norton Backup and HP's Backup utilities some type of backup obviously happened. FYI, I hate having all those options, as I'd rather use native Windows tools. In any case, today, I used the System Restore using the System Image Restore Point labeled as Backup and, after performing a few minor Windows Updates, everything went off without a hitch and my monitor problem was solved.

However, seeing that Restore point b... Read more

A:Windows 7 - System Restore, Saving a Backup & Permanant Restore Point

ad 1) restore points are in the shadowstorage

ad 2) yes they are overwritten when the shadowstorage is full. You can set the size of the shadowstorage with vssadmin

ad 3) for permanent backups I suggest imaging. There you control the images yourself.

Imaging with free Macrium

Read other 3 answers
RELEVANCY SCORE 95.2

I used to be able to get a System Restore point generated daily and accessible on a calendar. I understand that the Restore Point calendar has been done away with, can't imagine why?

Is it now possible to have a daily System Restore point automatically generated and easily accessible somewhere?

Thank you!

A:Can System Restore Automatically Generate Daily Restore Point?

Welcome to the Seven Forums

See if this tutorial will help.
System Restore Point : Create at System Startup

Jerry

Read other 1 answers
RELEVANCY SCORE 95.2

It appears that I have created 2 files that system restore uses in creating restore points.
I found that by deleating on of them, system restore returns to functionalaity.
Unfortunately, I didnt make a record of the file name that gets duplicated (slightly different duplicate).

If someone knows the file created and maintaind by the system restore process, I would appreciate you letting me know what it is so I can delete one of them.
TIA
Neil

A:System Restore- Created Duplicate Restore Point Files

Wait what is your asking? System Restore creates restore points, which are hidden in a folder called "System Volume Information" on the root of your system drive. These restore points are actually folders inside System Volume Information, each folder contains versions of system files and data of changes to your system (such as software and hardware installs). If a problem occurs you can revert to a restore point.

If you are worried you have two restores are almost identical you can clear all the restore points leaving the most recent by going to Start (Orb on Vista)->All Programs->Accessories->System Tools->Disk Cleanup.

Vista - On Vista, dialog will open click "Files from all users on this computer", then on following dialog click "OK".
XP - On XP, click "OK" on the dialog that appears.

Now it will start scanning for files that can be cleaned up. When it's done scanning a new window will appear and on the top of that window there will be some tabs, click the tab labeled "More Options". Look for the section that talks about System Restore and click the Clean Up button. Then Click "OK" on the main window. This clears all the restore points except for the most recent and should resolve your duplicate restore point problem.

I do not recommend that you ever delete files or folders in the System Volume Information, as if you need that file and your system crashes you are pretty much screwed.

-Michael

Read other 2 answers
RELEVANCY SCORE 94.4

Hello everyone,

I need guidance regarding how to do system restore to a restore point 6 months or even older.

Os i have: xp sp3

Around about 2 weeks back i upgraded my system to sp3 for that i created system restore point.

But the problem is when i go to do system restore it doesn't show me the restoration point about 2 weeks old in the list rather it only shows and allows to new restore points created within 5-6 days and that does not include that restore point which i created b4 sp3 installation.

So.Is there a way to do system restore to a restore point 6 months or even older? does window allows it or any third party software which helps me retain older restore points?

Note-i tried doing it via safe mode also but didn't helped, also the space alloted for system restore is maxed out.

Thanks in advance

A:System Restore(How to restore to 6 months or more restoration point)

System Restore was never designed to reverse the major changes made by a a service pack update. For that reason all prior restore points will be deleted.

System Restore works best when used as soon as possible after a problem develops. On the few occasions I have used the feature it has always been with the most recent restore point. The further back you go the more likely the restore will fail or cause more problems than it solves. Going back 6 months is almost certain to fail. System Restore was never designed for that.

Why do you need to go back that far? There is almost certain to be a better way.

Read other 7 answers
RELEVANCY SCORE 94.4

Hi

Ok I borke world recored for formating windows 7 , the last 2 months .
The problem is ;
Windows System restore keep freezing , I'm not trying to do system restore , but when I try to install/remove a software , windows try to create restore point , making the installation/removing prograss freeze , till the process fail , takes about an hour to. Installation/removing will continues after.

This windows is 6 days old , issue keep getting back after each format , sometimes after 2 weeks, sometimes after few days , once happened after installing graphic driver ( was first and only thing installed ) .

Sometimes it works fine after reboot , then refuse to work hour later .

I turned system protection off , the installing/removing works fine.
I tried tracking the issue , but it happens randomly .
Is this another windows 7 bug ?

What could trigger this issue ?
I did full scan , Kasper Sky , Avast ,and Nod32 , system is clean.
Removed Anti viruse .
Reinstalled , repaired windows through upgrade , issue still exist , not fixed.
System restore works fine in safe mode.

Any help , would be appreciated.
Thanks.

A:Windows 7 system restore point. Can't create / restore .

I solved this issue. Might someone els find this thread helpful.

Since it worked in safe mode and not in normal mode , there must be something perventing it from this.
in MSconfig , I unchecked all startup , and all services , except Microsoft services , System point was working fine then, I enabled few services and startup till I found the software causing this issue , it was graphic tweaking tool that comes with graphic card driver (Zotac fire storm ) I unistalled it , but it wasn't enough , I had to remove the startup entry manualy , now system working perfectly .

I hope this methode helps people that suffering from smiliar issue .
Note : If it fail to create restore point in safe mode , probably system file is damaged , and the above might not work.

Read other 1 answers
RELEVANCY SCORE 94.4

How to do a System restore and Mark Restore point using Win. Vista ?

Is it same way to do as Windows XP ?


Thanks.

A:System restore and Mark Restore point using Win. Vista

Hi -

Vista System Restore - whether restoring or creation of a restore point -
START | type rstrui into the 'Start Search' box

Regards. . .

jcgriff2

`

Read other 3 answers
RELEVANCY SCORE 94.4

Running XPHome, and trying to fix my Security Center (disabled in Services and can't be enabled) . . . there doesn't appear to be a way to fix that problem so System Restore came to mind. I can invoke SR OK, pick an earlier point (there are several back through March 29), and click "Next" to get to a "Confirm Restore Point Selection" screen. Once there, I can click next dozens of times, or once and wait . . . and nothing happens.

Trying to restore from Safe Mode is even less productive. On startup, when selecting "no" to enter System Restore, I get a message saying that System Restore cannot be used, and that I should reboot and try again. That hasn't worked (I've tried).

The System Restore Service is running, so something else is preventing SR from advancing. What are my options here? (Or, while we're at it, what can I do about my disabled Security Center Service?)

Thanks for any ideas -

A:System restore not restoring from existing restore point

The Security Center being shut down is a possible symptom of Conficker being on your computer. Go to the link below to check your system.http://www.confickerworkinggroup.org/wiki/

Read other 3 answers
RELEVANCY SCORE 94.4

I think I accidentally deleted some file on my c drive, and I am trying to restore the computer (Dell, microsoft 7) to its previous state but when i try to restore files it says that no restore points have been creaed.... open system protection. I can't open system protection. please help.

A:system restore does not work, cannot find a restore point

when I press ok nothing happens

Read other 9 answers
RELEVANCY SCORE 94.4

twice I've run system restore, and it always says failed. System restore started,goes threw loading registry and then reboots, after desktop loads the failed dialog box comes up.
I've read previous posts, and checked services running and made sure System Restore is on with available space.
At one time I'd run a program called Smart V 2.0 from the Windows Club. It had disabled a lot of services to speedup boot time. I've since reinstalled default settings for the services. Could that have maybe screwed up the restore points?
My computer had froze, and that is when I tried the restore. Computer is running OK now, but would really feel better if I knew System Restore would work. Thanks for your time.

A:system restore fails saying possible corrupted restore point

Welcome to our Forum Johnf.

This tutorial by Capt.Jack Sparrow should help.

System Restore General Troubleshooting to Fix Issues

Read other 3 answers
RELEVANCY SCORE 94.4

In Windows 7, when does System Restore automatically create a Restore Point?

A:System Restore: When Does It Auto Create a Restore Point?

Basically it makes one weekly, during critical system events and before the installation of programs.

Read more here
System Restore: frequently asked questions - Windows Help

Read other 6 answers
RELEVANCY SCORE 94.4

In the Windows & Task Scheduler, I have the default SR set up to run daily at 12:00am and on system startup. The Last Run Result is always "The operation completed successfully. (0x0)" and the History shows "Task completed" for each scheduled restore. However when I go into System Restore and view the restore points, none of the scheduled ones are listed. All the ones listed are Manual (which I can do through Windows Button -> Create a restore point ->Create), Critical Update (post Windows Update) and Install (post software installation).

I've increased the Disk Space Usage parameter to make sure there's plenty of space. I've also tried entering the command manually in cmd.exe:

"%windir%\system32\rundll32.exe /d srrstr.dll,ExecuteScheduledSPPCreation"

It appears to run (no error message), but it still doesn't produce any restore point and when I check in Task Manager I never actually see the rundll32.exe process run with that Command Line.

A:Scheduled System Restore not producing restore point

Hello Skeltong, and welcome to Seven Forums.

You might see if using METHOD TWO to create a task that will create a restore point may work better for you. You can adjust for when to create to what you like instead.

System Restore Point : Create at System Startup

Read other 2 answers
RELEVANCY SCORE 94.4

I want to restore my system to yesterday but the only restore point shown is 6-month old system image restore point. Are there any hidden restore points? And, how can I access them?

A:System Restore only shows an Image Restore Point

Generally system restore will show all the available restore points.
This kind of thing can usually be explained away by the use of a system optimizing or cleaner type program wiping system restore points as they are created. Generally you should have one for every windows update you've applied at the very least.
If they are not there system restore has been disabled on your system. Or something, or someone has been removing them.

Read other 3 answers
RELEVANCY SCORE 93.6

Greetings to all.

My wife is running Xp home edition on a Dell Inspirion 1520. The computer is not recognizing the CD drive. Even when we go to "my computer" it is not shown as a "Device with removable storage" My first thought to fix this was to restore the computer to an earlier point but when I get to the calendar to set a manual restore point the arrow buttons at the top of the calendar don't allow me to select anything other than the current date. Anyone have any ideas about this?

Thanks,

Jim

A:Manual restore point date selection doesn't work

I'd start simply. Disable System Restore, reboot, then re-enable System Restore and see if that fixes the problem. Let me know if it did

Cheers.
DataMan

Read other 3 answers
RELEVANCY SCORE 93.6

Hi, really annoying, because I always create restore points when installing software.
I tried the following command, in case, but no results:

> sfc /scannow
> DISM /Online /Cleanup-Image /RestoreHealth

What can I do?

Thanks
Serros

A:Cannot create manual Restore Point, nor read current ones >deactivated

Yes it seems Win10 has it disabled by default ......at least on some machines...

did you go through the Tutorial here :System Protection - Turn On or Off for Drives in Windows 10 - Windows 10 Forums

Read other 8 answers
RELEVANCY SCORE 92.4

Hello, I've had this problem forever now.

Whenever I try to create a restore point, Windows keeps telling me that it cant, saying

"System Restore Is not able to create a restore point.
Please restart the computer and run System restore again."

I've done this and it doesn't work. I've also checked to see if the Service is running normally, and that is running perfect.

Does anyone know how I can fix this?
 

A:Cannot Create Restore Point in System Restore

Read other 14 answers
RELEVANCY SCORE 92.4

I went into Task Scheduler and set System Restore to create a restore point every day at 12:01am. Under Conditions I cleared all the check boxes because I want SR to run regardless of whether computer is idle or not. I have been watching this for about 1 week and so far it's not created a single restore point. Under History there's no entry, and the tab itself actually say "History (disabled)", not sure what that's about. Suggestion?

A:System restore not creating restore point

Maybe something here will help: Change How Often System Restore Creates Restore Points in Windows 7 or Vista - How-To Geek

Says 7 and Vista but should apply to 8 as well.

I've not tried it yet though.

Read other 17 answers
RELEVANCY SCORE 92.4

Hi all,

So, this question sort of ties into this whole issue, but here's the basics. Currently my C drive, which has my Windows 7 install, can't/won't boot, but I have space on another partition (on another drive) where I could do a fresh Windows 7 install. If I were to do that, could I then somehow use System Restore from the new boot partition to tap into a Restore Point on the old one to put my PC back to the way it was before it got all screwed up? Or is that just wishful thinking on my part?

Thanks!!

Read other answers
RELEVANCY SCORE 92.4

Around 09:15 I set a new Restore Point 7/5/2010 5:00AM.
It did its thing and here's the resulting message.

"System Restore completed successfully. The system has been restored to 7/9/2010 9:11:16 AM. Your documents have not been affected."

How can this happen?

A:System Restore gives wrong restore point.

System restore would have selected the most recent restore point. Restore points are created automatically every day, and just before significant system events, such as the installation of a program or device driver.

If you want to restore to a specific restore point, you need to click the "Choose a different restore point" option. See this.

System Restore

Read other 2 answers
RELEVANCY SCORE 92

After a usual night of shutdown and booting it up the next day, my pc decided to stop working I have tried to let it manually repair it fails and restarts then it might go to the Automatic Repair option but it then gives me the error code : d0000034 and will not reboot or restor or anything. Help? i have also tried to do a refresh since it says it is running 8.1.

A:Error Code: d0000034 on System Restore point

Can you boot into safe mode?
 
Louis

Read other 0 answers
RELEVANCY SCORE 92

Hello All:
Everything seems to be running fine. I can get updates OK. But, I noticed that I have no retore points. I tried to create a restore point, but I keep getting an error message: Access Denied 0x80070005. Anyone know what's happening and how to fix it?TIA
VR
Vinny D

A:System Restore Point error Access Denied

Hi vinnyd,Take a look at this and see if this might be useful for you: http://forums.techguy.org/windows-vista/72...0x80070005.htmlZllio

Read other 1 answers
RELEVANCY SCORE 92

When trying to run the System Restore we got an Entry Point Not Found Error
RemoteAssistancePrepareSystemRestore could not be located in the dynamic link library winsta.dll.

Help please
 

A:System Restore Entry Point Not Found Error

Try the system file checker:
Go to the Run box on the Start Menu and type in:

sfc /scannow Note: space between c and /
You may need the windows xp CD
 

Read other 2 answers
RELEVANCY SCORE 91.2

I get an error message when trying to make a system restore point: "The planned task cannot be performed because off following reason: 'the task image is damaged and or corrupted' (0x80041321)" and also after the download of some driver update it says 'File access error' etc. System restore itself still works. I removed allready iTunes but this did not solve the problem. I did run Malwarebytes mbam scanner (ok). I restarted stopped service DefaultTabSearch and also stopped service VolumeShadowCopyService and also made a system restore to the oldest restore point available but got no solution until now.

A:persistent error when making system restore point (0x80041321)

Try this System backup error [0x80041321] - Microsoft Community

Read other 9 answers
RELEVANCY SCORE 91.2

SF diagnostic tool info ZIP attached.
After logging in, about 10-20sec later, I get a BSOD with 0x51 REGISTRY_ERROR.
I do not have a system restore point.
I have tried most of all of the things found when googling this: chkdsk, ccleaner, scf /scannow, etc...
Starts up fine in safe mode. I tried turning off all services and startups and still crashes.
Thanks in advance.

A:BSOD error 0x51 REGISTRY_ERROR with no system restore point

More info:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 51
BCP1: 0000000000000001
BCP2: FFFFF8A000024010
BCP3: 0000000001877000
BCP4: 0000000000000374
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Read other 4 answers
RELEVANCY SCORE 89.6

Hi all. I installed windows seven in Feburary and besides PC being not quite as 'fresh' and IE being very slow the PC doesnt seem to have any irregular behaviour.
I however, havent set a system restore point yet so I thought it might be a good idea to get you lot(Guru's) to have a quick peak under the hood before I do so. Appreciate any help given.
Regards Adam.

Malwarebytes Anti-Malware
www.malwarebytes.org

Scan Date: 21/11/2014
Scan Time: 6:17:55 PM
Logfile: MBAM scan.txt
Administrator: Yes

Version: 2.00.3.1025
Malware Database: v2014.11.21.05
Rootkit Database: v2014.11.18.01
License: Free
Malware Protection: Disabled
Malicious Website Protection: Disabled
Self-protection: Disabled

OS: Windows 7 Service Pack 1
CPU: x86
File System: NTFS
User: Adam

Scan Type: Threat Scan
Result: Completed
Objects Scanned: 283401
Time Elapsed: 5 min, 57 sec

Memory: Enabled
Startup: Enabled
Filesystem: Enabled
Archives: Enabled
Rootkits: Disabled
Heuristics: Enabled
PUP: Enabled
PUM: Enabled

Processes: 0
(No malicious items detected)

Modules: 0
(No malicious items detected)

Registry Keys: 0
(No malicious items detected)

Registry Values: 0
(No malicious items detected)

Registry Data: 0
(No malicious items detected)

Folders: 0
(No malicious items detected)

Files: 0
(No malicious items detected)

Physical Sectors: 0
(No malicious items detected)
(end)
--------------------------------------------------------------------------------------------------------------------... Read more

A:IE Slow & setting restore point.

Please, observe following rules:

Read all of my instructions very carefully. Your mistakes during cleaning process may have very serious consequences, like unbootable computer.
If you're stuck, or you're not sure about certain step, always ask before doing anything else.
Please refrain from running any tools, fixes or applying any changes to your computer other than those I suggest.
Never run more than one scan at a time.
Keep updating me regarding your computer behavior, good, or bad.
The cleaning process, once started, has to be completed. Even if your computer appears to act better, it may still be infected. Once the computer is totally clean, I'll certainly let you know.
If you leave the topic without explanation in the middle of a cleaning process, you may not be eligible to receive any more help in malware removal forum.
I close my topics if you have not replied in 5 days. If you need more time, simply let me know. If I closed your topic and you need it to be reopened, simply PM me.

======================================

Restore points should be getting created automatically unless you disabled system restore which is not the best idea.

Download RogueKiller from one of the following links and save it to your Desktop:

Link 1
Link 2
Close all the running programs
Windows Vista/7/8 users: right click on RogueKiller.exe, click Run as Administrator
Otherwise just double-click on RogueKiller.exe
Pre-scan will start. Let it finish.
Click on SCAN button.... Read more

Read other 25 answers
RELEVANCY SCORE 89.6

Hi All!
Apologies if I've chosen the wrong location for this post!
-
I just Installed a Solid State Drive replacing/cloning my previous Primary Disk Drive.
Apparently the Restore Point setup "window" still thinks the old Disk Drive is there, but "(Missing)".
Screen grab attached.
"Configure" shows zero current usage, but when I tried to turn it off I was warned that all restore points will be deleted and new Restore Points won't be created.
Perhaps that only means Restore Points won't be created (only) for the "(Missing)" drive and I'm worried about nothing. I want to be safe rather than sorry.
FWIW: The original Drive is still installed but renamed to a new name & letter.
-
Any thoughts or suggestions would be greatly appreciated.
Thanks
/jdU

Read other answers
RELEVANCY SCORE 89.2
A:System restore with no restore point set

Read other 14 answers
RELEVANCY SCORE 89.2

Ok so i tried downloading a program i definitely shouldn't have tried to download about a week ago and the results of that attempt have led my computer performance completely jacked...mostly in two aspects. My gaming is choppy as hell and so is video playback. Anyways, i have tried doing a system restore but when i open it there is only one system restore point listed from when I updated my system about 2 days ago. I have tried safe mode as a solution as it was suggested on some microsoft support page but that didnt change a thing. How do i restore to a point a week ago? Im so damn confused and im getting extremely aggitated.
 

A:Only one restore point...I NEED TO DO A SYSTEM RESTORE!!!

Read other 12 answers
RELEVANCY SCORE 89.2

This is the kind of mess that would make any techie cry - ID10T errors and PEBKAC all over. But your help would be sincerely appreciated.

I did not realise it but I had disabled my windows protection which automatically creates system restore points. Recently I managed to infect my OS with a rally of malware - one particularly nasty was Antimalware Doctor. I installed Avira for antivirus, comodo for firewall and spybot for additional protection (perhaps a little paranoid but I was kicking myself for being to lax up to that point). I try to avoid AV programmes, as nothing ever seems to work properly once they've been installed (see below) and they just interfere with every single application you try to install and messing with their function too.

Avira and Comodo started messing with my HP printer/scanner/copier software - every time I booted a Windows Installer window popped up looking for the installation disc for a damaged image, and would not go away. I inserted the disk but it did not resolve the issue. So I deleted all the files, removed them from the registry and prepared to install it from scratch. I tried installing it twice and both times it failed, and would automatically uninstall with the following error details:

MSIInstall () failed. X:\HP_Standard Port_Monitor.msi failed
Error Situation Code 03539016
Exit code: 1618

However, the next reboot popped up a Microsoft. Net Framework error, exactly as the forum post by andrewpm04 Error Message with Microsoft ... Read more

A:How to restore without a system restore point?

Read other 15 answers
RELEVANCY SCORE 86.4

I followed the instruction to manually create a Manual Restore Point and that works fine. Then I decided to set up the task in the Task Scheduler to automatically create a restore point once daily. For some reason the task is started as it should but it never completes and I have to manually terminate it. I have included in the attached ZIP file, 5 screen shots of the tabs of the task, 4 screen shots of the history tab starting and running and then 4 screen shots of the history tab when I terminated it an hour and 25 minutes later. I don't think a restore point takes over 85 minutes to complete so I wonder what I have set incorrectly??? The VBS file is C:\Program Files\Scheduled_Instant_Restore_Point.vbs and was downloaded from the W7 forum.

Let me know if you need any additional information. If this has been answered, I couldn't find the thread. Please point me to it.

Thank you.

Al Guden

Read other answers