Over 1 million tech questions and answers.

An error has occured

Q: An error has occured

Hi, not sure if correct part of forum if not please move.

I have a window that keeps stating the following.
An Error Has Occured On This Page,- Line 2,-
Char 7
Error- Invalid Character,-
Code 0.
It only seems to appear when I am using Crazy Browser web browser.
I have tried :- Internet options, Advanced,Disable script debugging but cannot get rid of it.
Uninstall reinstall browser tried.
Any help please.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: An error has occured

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 50.4

I have got error 0x8007371 when I tried to install .netframework 3.5 which was required to install windows essentials.
I ran DISM command to fix 0x80073712 error, and received another error message in the command prompt: Error 14098 Component store has been corrupted.
THen I ran sfc/scannow which gave another error "An error occured during installation of assembly component".
This is such a bul grab, can someone help
Thankz

Read other answers
RELEVANCY SCORE 50

Ive tried a whole bunch of different things to solve this error -
an error occured during DirectPlay Voice Setup. the error code is 0x8015017

Ive tried the DPVsetup.exe fix

RESOLUTION
This problem generally occurs only the first time that you run the test. If this problem continues to occur after the first attempt, follow these steps:
1. In Control Panel, double-click Sounds and Audio Devices.
2. On the Voice tab, under Voice Playback, click Advanced.
3. On the Performance tab, move the Hardware Acceleration slider at least one position to the right.

Ive installed 2 different files..

And still the tick remains on Mute against the microphone?? I can hear sound through the mike but cannot activate it?? Can anyone help?
 

Read other answers
RELEVANCY SCORE 50

hi everyone,
sometimes i get this error message that says "An error occured inside a plug-in contained on this page.".... when i get this error i click ok.. then another pops up and after i click ok about 5 times i have to restart my computer.

one of the sites that this happens to me with ishttp://www.gnronline.com/ when i click on the merchandise link at that site. i think the problem may have to do with quicktime because usually i see a quicktime box above the error messages. can anyone help please?
 

A:Error message: An error occured inside a plug-in contained on this page.

Hiya

I don't have Quicktime installed on this pc, and I didn't see the error that you're getting. Do you have Quicktime installed?

Also, in any other sites, does the error come up with the QT box?

If not, lets see a log, just to be sure:

go to www.spychecker.com/program/hijackthis.html , and download 'Hijack This!'.
Unzip, doubleclick HijackThis.exe, and hit "Scan".

When the scan is finished, the "Scan" button will change into a "Save Log" button.
Press that, save the log somewhere, and please copy & paste its contents to the forum.

It will possibly show other issues deserving our attention, but most of what it lists will be harmless or even required, so do NOT fix anything yet.
Someone here will be happy to help you analyze the results.

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 50

Hi,

After months of trying different things I have gave up and come here for help. The problem arrises when trying to install AVG 2012. The error that is displayed during installation is;

"Severity Error
Error code: 0xC0070643
Error Message: General Internal Error.
Additional Message: Installing 3rd party redistributables failed. If Windows update is prepared on your computer, install it, if Windows update was installed recently, verify, please, its successful completion. Try to install AVG then again.

Error 1935. An error occured during the installation of assembly 'Microsoft.VC90.ATL, version='9.0.30729.4148', publicKeyToken="1fc8b3b9a1e18e3b", processorArchivetecture="x86", type="win32", Please refer to help and support for more information. HRESULT: 0x80070002.

Having looked around, people say this is a windows update error. I have followed various links back to microsoft support and ran fixes which have been unsuccessful.

Is there anything that can be done without formatting this laptop?

Thanks
Jason

A:Error 1935 error occured installation of assembly Microsoft VC90.ATL

Having looked further into the problem, if I look at installed windows updates it says no windows updates installed but I know for a fact that Windows Updates are installed.

Read other 2 answers
RELEVANCY SCORE 49.6

Before i begin describing my problem, things i have already tried:
- using the web install
- using the standalone install
- editing my registry key as shown here /watch?v=lRq1-qUyvXk

I am trying to update my direct x to version 9.0c
I need it to play Planetside 2 but the installation process fails stating that an internal system error occured and that i should check the log files for more info.

However DXError.log does not exist, as for DirectX.log here it is

Code:
07/27/14 14:17:59: infinst: Installing E:\temp\DXB972.tmp\d3dx9_24_x64.inf [DefaultInstall]
07/27/14 14:17:59: infinst: Target file: 'C:\Windows\system32\d3dx9_24.dll'
Target file is Version 9.5.132.0
Source file is Version 9.5.132.0
07/27/14 14:17:59: infinst: C:\Windows\system32\d3dx9_24.dll have been installed already.
07/27/14 14:17:59: infinst: Installing E:\temp\DXB972.tmp\d3dx9_25_x64.inf [DefaultInstall]
07/27/14 14:17:59: infinst: Target file: 'C:\Windows\system32\d3dx9_25.dll'
Target file is Version 9.6.168.0
Source file is Version 9.6.168.0
07/27/14 14:17:59: infinst: C:\Windows\system32\d3dx9_25.dll have been installed already.
07/27/14 14:17:59: infinst: Installing E:\temp\DXB972.tmp\d3dx9_26_x64.inf [DefaultInstall]
07/27/14 14:17:59: infinst: Target file: 'C:\Windows\system32\d3dx9_26.dll'
Target file is Version 9.7.239.0
Source file is Version 9.7.239.0
07/27/14 14:17:59: infinst: C:\Windows\system32\d3dx9_26.dll have been installed already.
07/27/14 14:17:59: inf... Read more

A:Direct X installation error: internal system error occured

bump

Read other 1 answers
RELEVANCY SCORE 49.2

Hello,

I am using Win7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:

Banner: Error Occurred - Add License
Body: Unable to enumerate resources. Error Code: 15106

I have tried to google this, but I haven't gotten any helpful answers. Also, if I even try to register any of the Batch's DLLs manually, I get this error:

Banner: RegSvr32
body: The Module "C:\Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.

For more information about this problem, search online using the error code as a search term.

Any and all help appreciated!

Thanks,
Matt

A:Error Occured - Add License... Error Code 15106

Resource Enumeration Reference Resource Enumeration Reference (Windows)

Read other 1 answers
RELEVANCY SCORE 49.2

I am getting a disk read error occurred. Press ctrl alt del to restart.

I restarted my computer because my mouse was acting up:

The middle button was zooming in and out (web pages desktop etc) and the left click button was only selecting multiple files.

I had a little problem this morning when many of my files and folders on my desktop where renamed when I tried to make a new folder.

After trying a system restore that failed I ran a chkdsk.

What is going on and what should I do?

A:A disk read error occured error after restarting

Hi there dylan151,

Disk Read Error normally means the computer hard drive is going bad. The best thing to do right now is to scan your computer hard drive for errors. Go to a working computer, go to the manufacturing website of your computer hard drive and download the diagnostics utility. Put the program onto a bootable media(e.g. USB flash drive, CD, etc.etc.) and boot the computer to the diagnostics utility program. Follow the on-screen instructions and test the hard drive for errors.

If you have important data on that hard drive, take the hard drive out of the computer and use a Hard drive-to-USB adapter to connect your computer hard drive to a working computer. Transfer your files onto the working computer.

Hope everything works out well for you, please provide an update when you can, thank you.

Read other 2 answers
RELEVANCY SCORE 49.2

MDT 6.3.8330.1000 , ADK 10, CM07 (work in progress to upgrade)

Hi All,

      i just caputure windows 7 x64 ent from MDT and trying to deploy with CM07, getting error  in setuperr.log"Error [DJOIN.EXE] Unattended Join: Failed to load all required input parameters, error occured processing [Username]: 0x57"
and " [DJOIN.EXE] Unattended Join: Unable to join; gdwError = 0x57". I am not using "Apply Network Settings" to join computer not unattend.xml file. After install driver, image stop at set up windows (looking for computername). I have
setup my osdcomputername in collection. 

   My production image works fine with osdcomputername. i just update this image with IE11 and rebuild the Unattend.xml file.

link is for my log files http://1drv.ms/1mC6mFv ...

thanks for help in advance.

orion

Read other answers
RELEVANCY SCORE 48.8

Hi, may I know how fix error 2908? It's an interall error.

Read other answers
RELEVANCY SCORE 48.8

hey all.. i am new to this vista forums. let me first start off, by saying hey all.




I have an issue regarding the "turn windows features on or off" I get an error: "An error has occured, not all of the features were succesfully changed"


This is VERY frustrating. And im SURE its been solved somewhere :P

Any help would be GREATLY appreciated.

Thanks

A:An error has occured

Hi, Nemesis_2k7, and welcome to the forums.

First of all, we need to know 1) What features you're turning on / off in order to help you out further - there are a lot of features that are installed and a lot that are not and that leaves us with too many combinations to pick and choose with.

Read other 3 answers
RELEVANCY SCORE 48.8

Hello all.. I am about ready to pull my hair out here.. I am a computer support technician and I have no Idea why I am having such a hard time with this issue?!?! My uncles Dell inspiron 580s hard drive took a nose dive and I replaced it for him.. I got the factory restore cd's and reloaded the operating system (win7) and loaded all of the drivers and did all windows updates, installed Ie10, Blah blah blah.. updated to the latest video drivers, everything is up to date!!! flash player, java, etc.. 64 bit, 8 gigs of ram!! When I go to youtube, the video acts likes it loading and then goes back to the beginning and does that like 3 times and then gives me the "An error occurred, please try again later". I have searched and searched on google and tried all of the troubleshooting steps out there.. tried disabling hardware acceleration and everything inside of the youtube video. And the thing is!, all youtube videos work on chrome just fine!? I dont' get it.. my uncle uses IE so I don't want to have to tell him to change browsers.. Fresh clean new hard drive and fresh clean install of windows 7. I have no clue as to why it's working on chrome but not IE? Anyone help? What makes this so funny is that my wifes 7 year old emachine with 2 gigs of rams plays youtube movies just fine?!!
 

A:An Error Occured, Please try again later..

Looks like you are not the only one: http://forums.techguy.org/web-email/1110668-error-youtube.html

Will look into it with our google contacts
 

Read other 3 answers
RELEVANCY SCORE 48.4

Hello every body.
my pc have a windows vista home premium with 3 derives (C:, D:, F. from one months ago until now, it starts showing this message to me when i want copy, delete, or install any file on my F: derive: "the disk structure is corrupted and unreadable". i should add that almost every other day it shows this message to me and some times with restarting the pc the problem solves but some days latter again it shows this error.
so i try to do a CHKDSK check at windows startup for my F: derive but at stage 3 it shows this error message: "unspecified error occured".
what should i do?
Thanks
///Ali

A:CHKDSK error: unspecified error occured

Welcome
You need to perform arel test your your hard drive. Chkdsk is not reliable for these situations
Test Hard Drive HD Diagnostic or this test Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.

Read other 23 answers
RELEVANCY SCORE 48.4

Hi, I have a huge problem with my laptop...

One hour ago, i got a bluescreen about something not working and that I should restart the PC. I did so, and got this error:

Windows Boot Manager

Windows has encounted a problem communicating with a device connected to your computer.

This error can be caused by unplugged a removable storage device such as an external USB drive while the drive is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable is properly connected and then restart your computer.

If you continue to receive this error message, contact the hardware manufacturer.

Status: 0xc00000e9

Info: An unexpected I/O error has occurred.

ENTER=Continue ESC=Exit

If I press either Enter or Exit, the error appears again after a few seconds. My Notebook is an
Asus X70IO-TY021C 43,9 cm (17,3 Zoll) Notebook (Intel Core 2 Duo T6500 2.1GHz, 4GB RAM, 500GB HDD, Nvidia GeForce GT 120M, DVD +- DL RW, Vista Home Premium)

Can anyone help me please, I'm really kinda desperate...

A:An unexpected I/O error has occured.

from what i've been able to gleen from the web it's basicly your hard drive is either had it or needs the master boot record rewritten.

a link to guide from iseeuu forum member on how to redo your mbr should it require it.
MBR - Restore Windows 7 Master Boot Record

if you don't have a cd you may be able to press f8 after bios post and select 'repair computer' will be at the top if it's enabled but it is down to the manufacter to add it or not.

if your hdd has sacked it you could utilising another machine download a hdd tool from the manufacter website burn it to a disc as bootable and boot from disc at post, it will tell you if something is wrong.

if neither of these helps or isn't relevent let me know i'll think of something

Read other 5 answers
RELEVANCY SCORE 48.4

I have Nero 6 with Wave Editor 2.0. No matter which sound file I try to open in the wave editor (mp3 or wav) I get an error message saying
"An error occurred while reading from the file filelocation.wav"

It used to work and now all of a sudden stopped. I uninstalled it, rebooted, reinstalled and rebooted but yet I still get the same message.

Any suggestions anyone?
 

Read other answers
RELEVANCY SCORE 48.4

out of the blue, both pcs in my house cant access AIM. Could it just be the service itself is down? How do I tinker with this. Please help, i need to keep in touch with people and i dont wanna use the phone lol
 

A:AIM - A Server Error Has Occured

Read other 7 answers
RELEVANCY SCORE 48.4

the laptop is 5 months old with windows 7. i start it up and it goes black after the boot screen and then after a min or so a load bar loading windows files comes up it gets about 1/4 of the way up and stalls then i get this message something about removing any usb devices such as a hdd or cd rom but i have no usb devices. i tried removing the dvd drive in the laptop and booting and had no luck. i tried booting up the windows 7 dvd hoping i could use the repair facility with that and for some reason it will not boot from the cd it just goes straight to the same screen.
i tried pressing f8 and the safe mode option came up and i selected that and the same load bar came up and stalled 1/4 of the way. now whenever i start the message keeps coming up but i have the option to start windows which strangely loads up the starting windows logo but then goes back to the same old screen.

im guessing its a hdd problem somethings got corrupted. ive connected the hdd from the laptop to my desktop and im able to view all the files from it so the hdd isnt damaged all the files are there and i can access them fine.

what do i need to do to fix this? im sure its quite a complicated answer but it shouldnt be too hard i have a good bit of computer experience. what file/files are most likely to have become corrupted and is it possible for me to dig through the files on the hdd and replace them with non corrupted files? if thats even what the problem is
the hdd has a factory ima... Read more

A:Unexpected I/O error has occured??

With the Hard Drive connected to another PC I would run a Virus Scan on it. For Viruses I recommend Microsoft Security Essentials http://www.microsoft.com/security_essentials/ and for Spyware/Malware I recommend MalwareBytes Malwarebytes

I would run these scans before trying anything else. Please let me know how you get on.

Regards,
George

Read other 1 answers
RELEVANCY SCORE 48.4

why, does my Win 2000 computer keep giving me the message "Run time error has occured, do you wish to debug" over and over again while on the internet. Any Ideas?
 

A:Run time error has occured

1. Right click on the Internet Explorer icon
2. Select Properties
3. Click on the Advanced tab.
4. Look under Settings, Browsing
5. Check "Disable script debugging"
6. Click on OK.
 

Read other 3 answers
RELEVANCY SCORE 48.4

hello i run vista and youtube doesn't play some video an displays an eror has occured for them, i uninstalled quicktime and some seem to work now , any ohter things i can do to get the rest to work now? thanks
 

Read other answers
RELEVANCY SCORE 48.4

I have reinstalled a workstation HP Z800 and  I have used the disk Recovery that are in equipment of the workstation. After to have insert one after other the DVD RECOVERY, the procedure for the reinstallation have start but after a bit occured the issue that you find in attachment .  What is the problem 

Read other answers
RELEVANCY SCORE 48.4

Hi, here is my problem, hope you will be able to help me with it.

Recently when my computer boots, chkdsk starts running automatically. Thats ok. It does step 1 0f 3, great, does 2 of 3, however when it is doing step 3 of 3 its freezes at some percent over 50% and gives the following error:

"An Unspecified error has occured"

NOw everytime i reeboot my computer chkdsk runs and the same error occurs. I need chksdsk to complete its check because i dont want chkdsk to run at the beggining of every reboot (it takes to long)

Also because of chkdsk running on reboot, i cannot defrag my computer as chkdsk has exclusives rights to my hard drive at the moment

Can someone help me finish the disk check or some how disable chkdsk from loading on reboot.

Thank YOU
 

A:An unspecified error has occured

Hi,if any disk tool hangs I boot into safe mode & run it.Have never run Chkdsk as it's
not preferred by windows,if you can't run it in "safe" try scandisk as it's the default.,
& does the same task.Usually only runs at bootup if shutdown hasn't been regular.
 

Read other 1 answers
RELEVANCY SCORE 48.4

Package ID DeviceDiagnostic
Path C:\Windows\diagnostics\system\Device
Error code 0x80070490
Source Engine
user its not your job
Context elevated

Read other answers
RELEVANCY SCORE 48.4

I have reinstalled a workstation HP Z800 and  I have used the disk Recovery that are in equipment of the workstation. After to have insert one after other the DVD RECOVERY, the procedure for the reinstallation have start but after a bit occured the issue that you find in attachment .  What is the problem 

Read other answers
RELEVANCY SCORE 48

e-mail messages received from one person show an internet explorer script error "line 128 object expected url:mhtml:mid://00000036/" do you want to continue running scripts on this page?

What can I do to avoid this message always showing up from this person?

Read other answers
RELEVANCY SCORE 48

Hi Guys

One of my drive seem bad so I try to run chkdsk /r on it.
The chkdsk cannot pass stage 2 saying an unspecified error occured
I cannot acces that drive from win explorer either
Is that mean my drive is damaged beyond repair?
Please help.

Thank you
 

A:an unspecified error occured during ckdsk

http://www.thewindowsclub.com/chkdsk-stuck-hangs-windows
 

Read other 2 answers
RELEVANCY SCORE 48

Hi

I was working happily on my PC today when it suddenly stopped working and rebooted. It would not reboot though, it got onto the 2nd page of booting and then gave the error messege "A disk read error occured"

I have got into command prompt and typed DIR at the c prompt and all it shows is RECOVER.

Can someone please tell me how to start up in safe mode or alternative.

I am running XP home on a P4.

I think that my hard drive may be knackered but do not know. It is 80gb divided up into 3 - c drive, back up (E) and Recover (F)

Any help greatly appreciated
 

A:Disk Read Error Occured

Try here
http://www.techspot.com/vb/topic8356.html
 

Read other 7 answers
RELEVANCY SCORE 48

Okay, so I was on my computer and it all of a sudden freezes up, I tryed pressing Ctrl+Alt+Delete and nothing happened. So I reach down and hit the reset button on my computer. It turns off and when it tries to boot back up it says "A disk read error occurred; Press Ctrl+Alt+Del to restart"
of course I do this and it gives me the same message. I'm assuming this means there is a harddrive error.

I've tried booting from the disk and going into repair my computer after windows files load but my operating system does not show up on the list.

please help me! if it's of any use i have a Seagate baracooda 400gig 72000 rpm harddrive.

Thanks for any contributions!!

Read other answers
RELEVANCY SCORE 48

Hi,
having a problem I can't solve but I'm sure you can. My pc starts up fine but on reboot (restart) I get "disk read error occured", been trying all sorts of things so far no success, Downloaded Hijackthis and here's the info. Running XP with SP2 installed. Thanks. Perry
P.S. really need help with this soon, it's driving me nuts.

Logfile of HijackThis v1.97.7
Scan saved at 1:23:19 PM, on 11/18/2004
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\SYSTEM32\GEARSEC.EXE
C:\Program Files\Symantec\Norton Ghost 2003\GhostStartService.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\hkcmd.exe
C:\Program Files\Common Files\Dell\EUSW\Support.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\WINDOWS\BCMSMMSG.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\Symantec\Norton Ghost 2003\GhostStartTrayApp.exe
C:\WINDOWS\realtime.exe
C:\Program Files\Skype\Phone\Skype.exe
C:\Program Files\Google\Google Desktop Search\G... Read more

Read other answers
RELEVANCY SCORE 48

I'm not sure what's going on with my comp....I would consider myself an above average user. I mean I can format and reinstall windows myself and I have edited my registry file if that means anything! lol Ok anyways, on to my problem.....I have one hunch as to why I'm getting an error message from Windows Media Player (besides the fact that it's a Microsoft product). I just recently formatted my HD because there was something wrong with my internet connection, nothing related with my internet would connect. I tried looking for the problem myself and I also tried phoning my ISP and they had no better solutions than what I had tried, so I had to format and reinstall windows(which fixed the problem). About two days went by and I was having troubles with Internet Explorer so I downloaded Netscape Navigator 7.2 and since that time, I've had troubles with WMP. Everytime I load WMP, I get the error message
Quote:




An internal application error has occured




. Now I'm not sure wheter WMP is just acting up because I've installed another web browser or not, but that's what has brought me here! Please please please, somebody help me! Oh.....I'm sorry for this post being so long, but I just thought that it would be nice to fill you in on my prior problem! Thanx for taking the time to read my problem!

A:An internal application error has occured in WMP 9 & 10

Have a look here Why am I getting an internal application error trying to launch the player?
A: If the player is properly installed (and a simple reinstall of the player on top of itself will ensure that), then the only way you can possibly get this error is if something external to the player is not functioning fully and thus is breaking the player. You probably wouldn't notice that problem with other applications as the player uses more advanced interfaces than those other applications use.
That being said, if you installed a "codec pack", that's quite likely the source of your problem. Never install any codec packs unless you specifically know that the company in question is guaranteed to be reliable.
If you did not install a codec pack, this is almost 99% certainly a driver issue. If "mplayer2.exe" is functioning on your system (which would ensure that the video and sound drivers are working largely correctly), then it's most likely the CD-ROM drivers. This should fix you up, then. If not, it'd be time to contact actual technical support.

You can find this answer at this website http://www.zachd.com/pss/pss.html#errcodes, go to the left side of page and click on error codes second from bottom and then look for the paragraph mentioned above. There you will find how to contact technical support. See last sentence for reference to support. Hope it helps.

Read other 2 answers
RELEVANCY SCORE 48

First of all Hello!

My system will not boot. I was having problems w' Yahoo and Outlook and after deleting several important messages I slammed my lid closed on the laptop. Dumb move!

Upon opening the lid and taking the system out of Standby, I received a fatal error 0x00000006 BSOD message, then upon reboot "a disk read error has occured" message. I did some Googling and was led to believe either the MBR or HDD is damaged.

I've tried rebooting, removing the HDD and reinstalling it, I tried fixboot in Recovery console using my XP Pro setup disk, and finally have tried chkdsk /r using recovery. chkdsk is still running after 10+ hours and appears to have stalled out 5 hours ago at 61% complete.

I rebooted between each step and so far get the same results, disk error. I'm still waiting for chkdsk to complete, but I'm not holding my breath. Any help would be greatly appreciated. BTW, this is an Acer 5670 laptop runnning SP3 on a 100GB HDD. Thanks!
 

A:A disk read error has occured

You need a new harddrive. The only computers with "Smart Drives" are toshiba laptops. What these do is if there is any abrupt virbation or shock, it quickly shoots the actuator arms in the hard drive to the very end as to not damage the disk itself. A chkdsk should at MAX only run about 45 minutes. What probably happend is that when you slammed the lid, it might have scratched the surface platters of your hard drive, causing those parts to be unaccessable. Best bet is to go on ebay, find a 2.5" hard drive, and replace it, run your recovery disks and take it from there....sorry.
 

Read other 14 answers
RELEVANCY SCORE 48

Hello all I joined this forum hoping to get some clarity on this ^^

I just bought a new computer (I think you can see the specs in my profile) and I wanted to test GTA IV pretty badly. So I decided to buy it off Steam. Well it is not really working since nothing just happens when I click "Login" at the Social Club program.

I read somewhere that I needed to install Games for Windows Live, well this does not work either for some reason. I am using Windows 7 Ultimate x64

I get the error that is in the topic-name. Tried several versions with no luck, tried turning off some background applications that might interfere with no luck either(why would Skype or Pidgin/Bittorrent interfere anyway?)

I looked this up in the event viewer.






Quote:
Product: Microsoft Games for Windows - LIVE Redistributable -- Error 1935. An error occurred during the installation of assembly 'Microsoft.VC90.CRT,version="9.0.21022.8",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x 86",type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80070308. assembly interface: IAssemblyCacheItem, function: Commit, component: {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}


After that another message is visible, which is stated as Level "Information" but as Source "Windows error reporting".






Quote:
Fault bucket 1222096413, type 5
Event Name: WindowsWcpOtherFailure3
R... Read more

A:An error occured while installing XlifeRedist.msi

Fixed the issue, by re-installing Windows 7 and then after the drivers first installing C++ Runtime Redist 2010 and then just installing GTA IV with the GFWL etc. All worked. Skipped all .NET Framework related updates though.

Oh well

Read other 1 answers
RELEVANCY SCORE 48

i was trying to  "add features to windows" & i was not knowing my product key so i entered the product key of windows 8.1 pro which i got from net, and when the process ends & after restart it shows Windows 8.1 pro  build 9660 at the bottom right corner on my desktop then i suddenly go to setting n there i saw that it was showing Window is not activated. In the setting menu it is showing an error " 0xC004C003 " . So what can I do to resolve this issue and back to my genuine window 8.1 single language ???? please help me to solve this issue..... 

A:how to fix the error code : 0xC004C003 that has been occured...

Windows 8 Recovery:http://support.hp.com/us-en/document/c03489643 

Read other 1 answers
RELEVANCY SCORE 48

I tried to recovery PC but failied.Screen is red and telling 951.***ERROR*** The 1 st online audit phase was either skipped or not completed.Please press either Ctrl+Alt+C amd collect c:\system.sav.7z for issue reference. So I did. New window comes out shwing D:\>  What should I do next?

Read other answers
RELEVANCY SCORE 48

Okay, so I was on my computer and it all of a sudden freezes up, I tryed pressing Ctrl+Alt+Delete and nothing happened. So I reach down and hit the reset button on my computer. It turns off and when it tries to boot back up it says "A disk read error occurred; Press Ctrl+Alt+Del to restart"
of course I do this and it gives me the same message. I'm assuming this means there is a harddrive error.

I've tried booting from the disk and going into repair my computer after windows files load but my operating system does not show up on the list.

please help me! if it's of any use i have a Seagate baracooda 400gig 72000 rpm harddrive.

Thanks for any contributions!!

A:Disk Read Error Occured

I would try clearing the CMOS. Some times when you have a hard shut down, it corrupts the bios setup menu and it needs to be reset:

Clearing The CMOS

Clearing RTC (Real Time Clock) RAM:

Turn OFF the computer and unplug the power cord.

Remove the onboard motherboard battery.

Move the Jumper Cap from pins 1 & 2 (default) to pins 2 & 3. Keep the cap on pins 2 & 3 for ten seconds, then move the cap back to pins 1 & 2.

Reinstall the Battery.

Plug in the power cord and turn on the computer.

Hold down the DEL key and enter the bios setup menu to re-enter data.
Notes: Some motherboards use different key combinations to enter the bios setup menu.

There are also some motherboards that you can simply push a button to achieve the same as moving the jumper from pins 1 & 2 to pins 2 & 3 and then moving the jumper back.

Read other 2 answers
RELEVANCY SCORE 48

So I know this can be one of many problems, but I tried to start up the HTPC yesterday, and it would not awake from sleep. When I reset it, it had the message of "disk error read occurred". When I check the BIOS, it recognizes the SATA hard drive as 500gb, and everything seems great, but I can't even boot up from the Vista CD, I get the same message.

However, if I disconnect the hard drive, I am able to boot up the Vista CD, but of course, now I have no hard drive to work with.

I am planning on installing a floppy drive today to update the BIOS, and if that does not work, I will pop in a spare hard drive to run some updates on the BIOS to see if that would work.
Am I heading in the right direction thinking it is either the BIOS update or a bad hard drive?

The weird thing is that everything worked great the night before, but I had recorded two large HD episodes for a total of 4 hours. I wonder if the BIOS was not updated to handle the increase in GB capacity from the shows. I only say this because I saw some threads about going over 127gb making your Motherboard unable to boot from the HD.

Any thoughts or comments would be appreciated
Thanks,
 

Read other answers
RELEVANCY SCORE 48

when i check for upgrades i get this error message

W: GPG error: http://xnv4.xandros.com etch Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A3CCB76FA8BCF0C9

Before that I followed the instructions below to install the python IDLE

sudo bash
echo "deb http://xnv4.xandros.com/xs2.0/upkg-srv2 etch main contrib non-free" >> /etc/apt/sources.list
apt-get update
apt-get install idle-python2.5

now, when i select the install all upgrades option i get this error message

E:/var/cache/apt/archives/sysvinit-utils_2.86.ds1-38_i386.deb: trying to overwrite '/usr/share/man/man1/mesg.1.gz', which is also in package sysvutils

what should i do?
 

A:Error occured when updating packages

after that i was unable to shut down my computer, so i powered it off. now i cannot boot up xubuntu at all, after the it says starting up, i get the black screen of booting death.
i can access recovery mode but it stalls at
/bin/sh: can't access tty; job control turned off
(initramfs) [ 8.775041] Clocksource tsc unstable (delta = -740472046 ns)
[ 8.779054] Time: acpi_pm clocksource has been installed

is my computer dead?
 

Read other 1 answers
RELEVANCY SCORE 48

I am working on a laptop for my brother, Compaq evo 610c. It has windows xp professional on it. after the bios screen, an error pops up,
A disk read error occurred
Press Ctrl+Alt+Del to restart
I can access the drive and all the files in a linux live distro, and also in recovery console. I have tried to chkdsk /r but it did not fix the problem. It did say it had errors, whether or not they were fixed, I don't know. I have also run fixboot. I ran a hard drive check from the bios as well. I see nothing pointing to a faulty hard drive, but just some windows file corrupted. I am trying to avoid re-installing windows due to the numerous programs that are installed. I'm leery to try fixmbr because I don't want to lose the contents of the hard drive. If i haven't provided enough information let me know.

A:A disk read error occured

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=344596&prodTypeId=321957&prodSeriesId=344596&objectID=c00832290

Louis

Read other 6 answers
RELEVANCY SCORE 48

While trying to reformat my hard drive with the system startup disk it stopped before it was complete. Now when you try to turn the system on it says 'a disk read error occured, press ctrl+alt+del to reststart'. When you do this is comes up to the boot menu which gives you 3 choices: hard drive, cd rom, or lan. None of these will let you start the system. its like there is no OS. What can I do to load the OS using my startup disk?. Thanks
 

A:A disk read error occured

While trying to reformat my hard drive with the system startup disk....its like there is no OSClick to expand...

Didn't you format? (even half done format, means the OS is gone)

You need the Windows startup disc to remove the partition and re-install Windows (obviously you didn't need to save any data)

Just use a Windows CD
(is this a real post?)
 

Read other 2 answers
RELEVANCY SCORE 48

hello i m facing a problem that whenever i start my system ther is an error"disk read error occured"what would be the basic reason behind the problem,is there any cabe fault or having the bad sectors in hard disk.......????

A:disk read error occured

First thought bad harddrive. Go to hdds makers website, download
diagnostic tool, boot to it and run the diagnostic.

Read other 1 answers
RELEVANCY SCORE 48

Hi,
For the past few days whenever I try to login in to my Yahoo messenger, I keep getting this Error Message on my desktop after i login in.

An error has occurred in the script of this page
Line 37
Char 5
Error Acess is denied.
Code 0
URL http://matab.games.yahoo.com/messenger/gametab

Do you what to continue running scripts on this page.

Yes/No.
Clicking yes or no makes no difference the error still reappears when i sign into Yahoo messenger...
I've checked Disable script debugging, and unchecked display a notification about every script error too, have typed Regsvr32.urlmon.dll in Run.I still keep getting these scripts errors. I've done a google search for http://mtab.games.yahoo.com/messenger/gametab and it comes up with a site called dnl.vsltz.com ( What is this )
Can anyone help me fix this problem.
 

Read other answers
RELEVANCY SCORE 48

Hello Everyone, this Error as once again returned. An unspecified error occured (766f6c756d652e63 3f1).
I think i posted about this a few months back
windows 7 will not shut down

i was able to do a few image backup using EaseUS Free backup software, i have to images one for october 2013 and one for the Clean install i made back in march 2013,

i attempted to to do a image backup for today and about 3/4 through the process my system crashed,

so i did a start up repair and attempted the backup once again, and once again it crashed,

i then did a SFC / scannow . and it came back with no errors.

i then removed EaseUS using revo UN installer. and installed the latest version

Tried the Backup again and it crashed about 3/4 of the way through again

I have a 120Gig SSD Drive. i am starting to wonder if my SSD is going bad ??

A:An unspecified error occured (766f6c756d652e63 3f1).

well i dont know whats going on with my SSD.

Read other 1 answers
RELEVANCY SCORE 48

'Windows has encountered a problem communicating with a device connected to your computer'

Status: 0xc00000e9
Info: An unexpected I/O error has occured.

This is on windows 7, how do I fix this? I've tried system restore, system repair, but they all fail
 

A:Solved: An unezpected I/O error has occured

Read other 6 answers
RELEVANCY SCORE 48

I get the feeling that this is a fairly common problem but I couldnt find any answers online that helped or worked.

I have a Toshiba NB200 netbook and it has just come up with the error "a disk read error has occured. Press Ctrl Alt Del to continue".

Can anyone give me any advice on whether this is something that I can have a go fixing or will I need to take it to a repair shop?

Thanks in advance.

A:A disk read error has occured.

Sounds to me like your hard drive is failing.

If you can get the system to boot, backup your personal data while you can.
Then replace the drive.

How old is the system?
Any chance it is still in warranty?

Read other 9 answers
RELEVANCY SCORE 48

I.E. 6.0 "Runtime Error has occured do you wish to debug? Y/N?" Line 40 Object:expected"

I get this error often while using IE in many different places. Does not seem to be any rhyme or reason. Please help. Thanks.
 

A:I.E. 6.0 Runtime Error has occured do you wish to debug?

have you installed all patches and updates? try that first -if that doesn't work do a repair.
 

Read other 1 answers
RELEVANCY SCORE 48

Ok, ive had nothing but problems with this new comp i built. I finally got it together, and its been working for weeks, no problems. Then suddenly the other day i went to restart it, as its restarting it says "A Disk Read Error Occured: im confused, turn it off, and turn it back on to see if itll work. So then i took it apart checked the wires to see if they were loose, still same thing. So i then tried to Do a system recovey/restore, i set it up so it reads the cd rom first, and i put my Win XP cd in there. Well it goes to a black screen, and the cd rom makes sounds like its tryign to load up, but instead it just sits at a black screen goign no where. Ive tried several times, and still no change. I was wondering if anyone has had this problem, or knows how to fix this problem. If you have or do, please respond to this message Asap or e-mail me at [email protected] thanks.

A:A read disk error occured

One thread per issue is sufficient!

This thread is now closed.

See here

Read other 1 answers