Over 1 million tech questions and answers.

Solved: HP Deskjet 648C won't print

Q: Solved: HP Deskjet 648C won't print

ok, got this beast for free, plugged it in, loaded drivers, went to print a test page and, there is some clicking noise, it loads a sheet of paper and then the yellow resume light flashes, no pattern, just constant blinking. A little later a message comes up on the monitor saying print failed blah, blah, etc.. I cancel the printing jobs, and the printer spits the blank sheet out.
Of course I'm thinking it was free for a reason, but it came from my wife's boss, he's replacing some printers and he's giving some of the old ones away, so is it busted, or am i missing something here.

RELEVANCY SCORE 200
Preferred Solution: Solved: HP Deskjet 648C won't print

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Solved: HP Deskjet 648C won't print

Read other 9 answers
RELEVANCY SCORE 94.4

I am trying to help a lady next door she has windows 98 SE and the hp deskjet 648C printer, well her printer has been acting up so I went in and deleted the default printer and was going to reinstall it, well find out she hasn't got a cd for it so I get into it and click on hp and it gives you all the different kinds but there is no deskjet 648C what can I do, also if I get that fixed I think her driver might have been corrupted will that take care of that also, cause I could nt find a driver for a 648C euither when I clicked on the new driver, please help me get it reinstalled what can I do???
 

A:Solved: HP Deskjet 648C Please help me fast-Please

Read other 6 answers
RELEVANCY SCORE 86

Ive got a weird problem w/a printer here where I work. Everytime you print a document of any kind, it picks up the paper, starts to print, then stops and says the printer is out of paper before it even attempts to print the first page. I've went online and used all of the help there that I could, and it didnt help me any. I have also deleted and re-installed the drivers and software for it numerous times. I dont know what else to do???
 

A:Deskjet 648c

Read other 16 answers
RELEVANCY SCORE 66

Parallel Cable...Printer is listed as default in Control Panel. LPT 1 port in properties. But no LPT 1 port listed in Systems..only COM port when I expand "Ports"...New motherboard yesterday. As soon as I try to print I get error message.."failed to print". Went to HP to download drivers...HP says no HP or Compaq products installed and nothing available in my language!!! Beats me. Any help? New cable maybe?
 

A:Solved: HP Deskjet 932C won't print

Read other 6 answers
RELEVANCY SCORE 66

My HP deskjet 2210 won't print it does scan but it will not print. Cleaned everything ran the tests... Weird thing is that when I put the installation disc in it said it didn't support Windows 7..???

What can I do?? I need to print out something badly...

Also when I try to pull up printers and devices in control panel it takes forever!!

Please help!!
 

A:Solved: HP Deskjet 2210 won't print

I think that unit was introduced at least 1 1/2 years ago, so it makes sense that the included disk would not have Windows 7 support. Suggest you remove/delete whatever you have and install it fresh using the latest package.
 

Read other 1 answers
RELEVANCY SCORE 65.2

For some reason when I started to use the above printer today I got the error message up about the spool subsystem app not running. I googled the message and have tried everything to get it working that was on the Microsoft website. I have stopped the spool running and restarted it to no avail. I booted up in Safe mode and proceeded to follow the instrucions on MS `s site deleting all the registry keys it stated, but it still keeps appearing, can anyone please help me?

I am running XP Home SP3, and until this morning was running fine..
 

A:Solved: Hp deskjet cannot print (spool error)

Read other 8 answers
RELEVANCY SCORE 65.2

Thx in advance for input :

error writing to LPT 1
unknown system error

comments : I have external Iomega Zip drive and HP ScanJet 5P as part of my system. The printer starts to print word document and stops mid stream. In the past I have shut down computer, restarted and it works. I'm thinking of uninstalling printer and scanner and reinstalling. In the past I have had .dll error messages(I may have inadvertently deleted some .dll a while back when moving scanner files from C drive to Zip drive, my system has never been the same since.) Your consideration is appreciated and lunch is on me if we ever meet.
 

A:{SOLVED} HP Deskjet 722C print problem

Read other 12 answers
RELEVANCY SCORE 65.2

Moved my HP Deskjet 5550 from win 98 to XP using a parallel to USB cable. Obtained latest drivers and installed. Test print and calibration both correct but won't print out anything but first centimeter on page before ejecting in any other application. Print preview (even the HP supplied one) shows one page correctly but print queue lists it as 3 pages!

Is this to do with XP the cable or what? Have uninstalled and reinstalled - same problem. Have checked page set up in application and printer and all appears correct.

Can't understand why test page correct but nothing else!

Any help welcome!
 

A:Solved: Deskjet 5550 won't print properly

Umm... okay, when you say 'parallel to USB', do you mean a USB/Parallel adaptor? If so, why not just use a USB cable, since the 5550 has an either/or system? (I have 2 of these machines, one of which is plugged into two computers - one through the parallel, one through the USB.)

Remember though, since the 5550 has both jacks available, you have to chose which setup to use when doing so. If you are using a parallel to parallel hookup, the printer has to be plugged into the parallel jack and powered on while the software is being installed. If you're trying to plug it in via a USB to USB connection, you must install the software BEFORE plugging the machine into the USB jack - the install will tell you when to plug it in. If you are using a USB/Parallel adaptor, ITS OWN software must be installed first. The adaptor then needs to be plugged into the computer, and THEN you plug the printer into the adaptor and power it up, followed by installing the software via the Parallel to Parallel method.

Now, the other thing to remember is to either use the 5550's install disk to remove the software, or simply delete the 5550's icon from the Printer's and Faxes listing on your Control Pannel. I do NOT reccommend using "Add or Remove Software" for printers, since this program can remove too much, such as registry information from Windows.

Good luck!

A-N
 

Read other 2 answers
RELEVANCY SCORE 56.8

Hope someone can help as this is driving me mad!

Last night I went to print a document from my printer (HP Deskjet 1360) it failed to print. On checking control panel, the printer was showing as 'offline' but with no means of restoring it on line via right click menu.

I trawled the HP website and downloaded complete set of new Vista compatible drivers/installation software (all 106mb of it!) but printer still failed to print.

This time I received an error message stating that the printer cartridge on the right hand side was 'incompatible' which is confusing as both cartridges are HP originals.

I switched the PC off a while and when I rebooted I noticed that the printer, in Control Panel, was showing as 'ready' however attempting to print bought up the 'incompatible printer cartridge' error message.

I was thinking if the problem could lie with the USB cable linking printer and PC and if it would be worth replacing it. It would be a cheaper option that replacing the printer which I will have to do at this rate.

Any help would be appreciated.
 

A:HP Deskjet will not print

Read other 8 answers
RELEVANCY SCORE 56.8

I am having problems printing from my Windows NT Workstation. I have uninstalled and installed the printer software and it still doesn't print. I have tried the printer on a WIN98 machine and it works fine.

I had this problem before and a tech told us that it was bad printer port so he installed a new one and it worked for a while but now we are back to the same problem. I also tired printing on LPT1 but it didn't work either. The new printer port that the tech installed is LPT2. Any suggestions?
 

Read other answers
RELEVANCY SCORE 56.4

When I give print command in any application then firstly the message appears that "DOCUMENT FAILED TO PRINT" then I tried troubleshooting through Windows, I updated the drivers also but nothing helped so far.
Then after a gap of some time say three mins. approx., the document starts printing !
How to solve this problem and what is it all about?
 

A:HP Deskjet 5550 does not print in one go!

Read other 16 answers
RELEVANCY SCORE 56.4

I have an HP deskjet 722C about 7 yr old that has a parallel connection only. I recently updated my 5 Y/O pc to a more current model that does not have a parallel printer port. The printer prints fine & I have several spare cartridges that cost a lot of $$ that i don't want to waste so I'm not eager to buy another printer. I therefore bought a parallel to usb cable hoping it would solve the problem. When i attached the cable, windows responded by recognizing it (good) & announced that it was installed correctly (good). I saw the printer in devices & printers (good) & set it as my default printer. However, when i try to print a document, everything seems to be fine, including print preview, but the printer is totally silent, not a peep. D&P shows 1 document in the cue, waiting for printing, but nothing happens. The printer seems to be the only link in the chain that does'nt know that everything is hunky dory.

Is there a simple solution to this or is the printer toast?

Thanks for any help.

Ron
 

A:HP deskjet refuses to print

Read other 16 answers
RELEVANCY SCORE 56.4

I bought an hp deskjet 697c printer from the thrift store w/no paper work manual or disc...it turns on & installed to my computer but won't print anything even a test page. On the spool it just says error & a balloon comes up that says printer failed to print document. I pushed the resume button & a page printed that said paper mismatch so I kno it works but why won't it print anything I send to it. I have done numerous troubleshooting...restarting computer...reseting printer..reinstalling port...changing ports...changing spool properties...checked all plugs & cables...ink is full & properly installed...i was going to install a new or different driver but it says that the proper driver is installed for this printer for windows xp which is what I have...nothing seems to work. Please help me resolve this problem I don't kno what else to try...Thank you
 

A:Hp deskjet 697c won't print

You can download the proper driver from here:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=61014&lc=en&cc=us&dlc=en&submit.y=9&submit.x=7&lang=en&cc=us

When it is downloaded, install it according to instructions. Will work better than installed XP driver.
 

Read other 2 answers
RELEVANCY SCORE 56.4

I've got a friend who can't print anything from Word Processors. The test page prints fine and pages from the internet print fine. I've tried re-installing the printer and the printer drivers and the word processors but to no avail. I checked the HP site and the diagnostic programs there say the printer is cabled correctly and communicating with the computer and has the right driver. When I tried to get an updated driver from HP the site said the driver on the MS XP install disk was the best one to use. The HP 810C is set as the default printer. When a file is sent from Word, Wordpad or Notebood the printer starts, the head moves back and forth and a blank sheet is output. Anyone got a clue?

Read other answers
RELEVANCY SCORE 56.4

I need to find a print driver for a portable HP Deskjet 340 that is compatible with Windows NT 4.0. I think the driver I'm looking for is called a "mini driver". Any guidance would be helpful. Thanks!
 

A:Need HP Deskjet 340 Print Driver

Read other 7 answers
RELEVANCY SCORE 55.6

HP Deskjet will not print from Desktop but will from laptop
My HP Deskjet will not print from my desktop. I keep getting errors saying it is off or offline, but it is on and status is "ready" on the printers and devices menu. I can print from my laptopthrough the wireless network so I am a little confused. I have done all the HP trouble shooting senarios, uninstalled/reinstalled stopped and started the spooler etc etc. I really need to be able to print from my desktop for my business.
Please help, I really don't think I should have to be a IT to print at home!
 

A:HP Deskjet will not print from Desktop but will from laptop

Read other 7 answers
RELEVANCY SCORE 55.6

Hi, I just got a new desktop and the printer won't print.
It's running Windows 7 64-bit. (was running xp 32bit)
The printer is a HP Deskjet 710c connected using the parallel port connector,
it comes up under devices and printers and it adds items to the queue but never prints, i cant even print a test page.

A:HP Deskjet 710c won't print on new computer, what can i do?

Is it possible to connect via USB?

Read other 2 answers
RELEVANCY SCORE 55.6

I have two HP Deskjet 3050 printers; one on main machine with Win7 Ult, and the other on backup machine with Win8 Pro OEM. I am running MS Office 2010 on both machines.

I have files with XL Spreadsheets created from MS Office 2003, 2007 and 2010.

All versions of all XL spreadsheet files can be printed on both W7 and also on Vista, (prior to replacing it with W8).

W8 has the following problem:

1. All older version spreadsheets, (Excel 2003 & 2007), on W8 can be printed OK.

2. All new Excel 2010 spreadsheets created on W8 can be printed OK.

3. All existing Excel 2010 spreadsheets created on either Win7 or Vista by MS Office 2010, will not print on Win8.

When print preview is opened in the spreadsheet, it shows the section of the spreadsheet to be printed. If "Print" is clicked, a small window momentarily appears on the screen showing the print instruction has been sent to the printer.

In the "What's being printed" window, (found in Control Panel > Devices and Printers > What's being printed), the job is listed as queued to be printed, but nothing happens.

After 3 or 4 seconds, the queued job disappears from the "What's being printed" window.

I've discussed this with Hewlett Packhard, and spent an hour or more with them trying to trouble shoot it to no avail. HP believe it is an incompatibility issue with W8, and asked me to take it up with Microsoft , and also with this forum.

Has anyone experienced a similar problem ... Read more

A:HP Deskjet 3050 won't print spreadsheet

Update: The problem appears to be a security/compatibility issue.

1. Create a new Excel spreadsheet in Windows 7 using MS Office 2010

2. Open it in either Windows 7 or 8. Then click: File > Check for Issues > Click: Inspect Docment.

Nore: Compatibility is green ticked to show no issues.
3. As a result of the inpsection, the following identical problems are shown in both Windows 7 & 8.



4. With this information left intact the document can be printed in Windows 7 but not in Windows 8.

5. In Windows 8, when attempting to print it, no error message comes up. However, it shows the document queued to be printed, in: Control Panel > Deskjet Printer > See what's printing. However, after 4 or 5 seconds, the item disappears from the queue.

6. If the data is removed completely, the document prints OK in Windows 8.

As I have large numbers of such Excel files I will have to manually change every one of them to print successfully on Windows 8; and this is impractical.

I tried to talk to Microsoft Australia by phone but they said if the job was sent to the printer and was queued, there was nothing wrong in W8, and would not discuss it any further.

Does anyone know how I can get in touch with Microsoft to report the problem in full detail to them?

Read other 6 answers
RELEVANCY SCORE 55.6

My printer is a HP Deskjet F4400 series, bought it March of 2010, and lately it was making noises, but now it doesn't print anymore. When I was trying to print something, the paper starts then stops, and nothing else (the machinery) happens, then it becomes a pain to turn it off. Is my printer going, or could it be something else?

A:My HP Deskjet F4400 doesn't print

Double-post: is there anyone who can help?

Read other 1 answers
RELEVANCY SCORE 55.6

My HP Deskjet will not print from my desktop. I keep getting errors saying it is off or offline, but it is on and status is "ready" on the printers and devices menu. I can print from my laptopthrough the wireless network so I am a little confused. I have done all the HP trouble shooting senarios, uninstalled/reinstalled stopped and started the spooler etc etc. I really need to be able to print from my desktop for my business.
Please help, I really don't think I should have to be a IT to print at home!
 

A:HP Deskjet will not print from Desktop but will from laptop

check it is set to the correct port in printer properties
 

Read other 1 answers
RELEVANCY SCORE 55.6

I just changed the cartridges on my HP Deskjet 3820c and now it will not print,anything! This is my second HP printer so I know about changing cartridges.I have tried the color cartridge in another printer so I'm sure the color cart is OK,not sure about black.Both are new,not refilled.I have tried uninstalling and reinstalling the software and drivers,I switched from Parallel to usb,performed a hard boot on the printer and tried to print a self test page recommended by HP.I have unplugged the printer,removed the cartridges,plugged in the printer and reinstalled the cartridges.I made sure that the copper strips were clean and undamaged.I cant get any useful help from HP without paying up front. Any Ideas? I have an Athlon 1GHZ on an elements 830cn Motherboard with an SIS 730 chipset,256MB ram,a WDC 40 GB HD,Maxtor 15 GB HD.
 

A:HP Deskjet 3820c wont print

Read other 6 answers
RELEVANCY SCORE 55.6

A friend has a HP 560C running on an old 486dx. When he tries to print an email out everything works fine except that the bottom line of print doesn't print correctly. It prints the top 10% or so of the line but the rest is a combo of blur and non print. I checked the printer settings but could find no settings in there that I felt would affect the bottom print line. Never did find any scaleable margins or page size which I thought might help. Page size seemed to be preset .
The system uses Win95 O.S., not enough memory to upgrade to 98, and he uses explorer and web based email through Juno.

I did try to print from Eduro and the page printed in its entirity, but we ended up with the header info. Tried copy/paste and lost the last line when printing out of word pad or note pad.

Any suggestions or solutions would be appreciated.

Many thanks in advance.
 

A:HP Deskjet 560C Print problem

What browser are you using to print from? Check the settings in the browser itself because it's not a printer problem. Have you also tried a different version of the same driver?
 

Read other 3 answers
RELEVANCY SCORE 55.6

Hello everyone,
Ok, basically I have an HP Deskjet 656c (also known as the apollo 2500/2600). The problem I have is that it will not print anything when running on the Windows XP O/S. I used to have it hooked up to my ME O/S machine and it worked fine. When I attempt to print off of any word processing program (even notepad) the printer just sits there, and it doesn't even get pooled. When I run it inside of the print assstant it feeds the paper through, and nothing is printed.

- I assumed that the driver CD that came with my printer, was for windows 95/98/ME/Millenium...SO I went to the HP site and downlaoded the driver that stated it was for the Windows XP O/S. I did a complete clean installation of it, following the onscreen and websites instructions. The same problem above had occured when I tried to re-print..

So basically I am not sure if it is my computer, O/S or the driver file?

Sorry for the long read, hope it was clear enough to understand...if not just post and Ill clarify anything

Thanks for reading!

P.S - I am running Windows XP Professional, and when I say clean install I mean removing it from add/remove, deleting it from the printers/faxes and also deleting files in the Program Files folder

Read other answers
RELEVANCY SCORE 55.6

My HP 697C printer will not print anything in color. The default settings under printer properties show to be "Normal" and *Automatic". I just read on one of your threads that it is important to occasionally print in color to prevent the cartridge from drying out - I was unaware of this and I usually change the settings each time to "EconoFast" and "Print in Grayscale" when I print web pages and etc. The color cartridge is about a year old and very seldom used, The last time I remember actually printing in color was probably about 2-3 months ago, and prior to that I had never experienced this type of problem. I did not notice any changes in the quality of the color at that time (fading etc.) When a cartridge dries out does it happen gradually with the color fading with each printed page or what ?

Any help you can offer would be greatly appreciated!!
KraftyOne
 

A:HP Deskjet 697C will not print in color

Hi Kraft
Yes a color cartridge can just dry out quickly and not work. You should try printing a test page from your printer to double check. Most HP printers have some type of self test print you can run by pushing the buttons on the control panel. Check in your instruction book to find out how to run yours. If you still have no color you know its not windows or a driver causing you a problem. BOL
 

Read other 3 answers
RELEVANCY SCORE 55.6

Hi, just had printer delivered and it won't print, gives constant paper jam errors when there aren't any paper jams, won't turn off and the light won't stop flashing. When says onscreen that it's deleting printjob, takes forever, and am having to reboot computer a couple of times before printjob finally isn't listed. Only way can turn printer off is to unplug power. Haven't been able to print anything, even when the paper jam messages aren't coming up and it looks onscreen as if it's printing.

Cartridges don't seem to be sitting right ... would have thought would be fully underneath at the left, but one cartridge is showing, and every time I try to press the power-off button or cancel-button, the cartridges clunk as if are trying to sit underneath, but don't. Not sure if printer's taken a bash on way here; box was bit old-looking. Have looked at all the information, and have emailed HP's tech support, but no idea how long it could be until hear back, so wanted to post as had very helpful replies previously. Fed up, got some stuff really need to print out!
Thanks, Cat
 

A:HP Deskjet 3650 won't print or turn off

Read other 9 answers
RELEVANCY SCORE 55.6

07/20/04

A refilled cartridge quit printing yellow so I pulled it and refilled all three colors, still wouldn't print yellow----cleaned, primed etc and no luck. Inserted a new cartridge (several months out of date) and still no yellow. Tried all the cleaning tips on HP's site to no effect.

Anyone have an idea??

Thanks, Jim
 

A:HP Deskjet 722C - Yellow won't print

It is likely that the Out if date and refilled cartridges are the problem if you have tried all cleanignroutines........try a new cartridge.
 

Read other 1 answers
RELEVANCY SCORE 55.2

i have had numerous problems in deleting print jobs from the printer queue. they seem to get hung up and just keep printing page after page of special characters. i have tried canceling the job. power the printer on and off. unplug the printer cable. sometimes i have had to do all 3 numerous times before the print job will clear all the while wasting paper and ink. i don't see any updates to the driver.

any suggestions

thanks

A:deleteing print jobs on hp deskjet 895e

You could always try turning the spooler service off...then turning it on again. Or simply delete/uninstall the printer and software...and then reinstall it.

I believe that's what I do at times (i don't print often and don't really remember).

Louis

Read other 1 answers
RELEVANCY SCORE 55.2

Hi,
Been using HP Deskjet 3845-works well until I accidentally deleted the HP driver 14mb's in my downloads-I restored it but now, it is not printing and I have flashing green light--any tips?
Thanks
 

A:HP Deskjet 3845 won't print after deleting hp driver

Read other 12 answers
RELEVANCY SCORE 55.2

I have been using the DeskJet Ink Advantage 4535 printer and recently I have been receiving the '' attention required'' message. Though there is no problem with the wireless connection or cartridge, it says '' this is a web services printer'' and does not provide the print.
Your assistance will be appreciated.
 

Read other answers
RELEVANCY SCORE 55.2

Help! I just refilled my HP DESKJET 3847 (ink cartridges 27 and 28) for the first time right after the ink levels were shown low and the red does not print at all! Only the yellow, blue and black ink shows. Everytihng was printing perfectly fine until I refilled it. Is it possible that there might be air bubbles inside the RED channel or something blocking it from the REd from going out? Or I refilled it too quickly? Whatever the cause is, can there be a solution to solve this problem?

I already did all the "cleaning Cartridge" tests and procedures both from the software setup and physically as well with the q-tip dabbed with warm water and rubbing alcohol. i even used my lexmark rubber nozzle to suck out some ink, even though it was too small for the HP cartridge, some ink did eventually go out and the RED printed for a while but about half page it just faded away into YELLOW.

Does anyone know an alternative solution into fixing this? Thank you for your time.

**EDIT**: When I was sucking out the ink several times, sometimes it would be blue, red, yellow, and green. All in all, there would always be bubbles bubbling up in the syringe. Should that be normal?
 

A:HELP! My 1st HP Deskjet 3847 refill doesn't print RED!!

Sounds like a faulty cartridge....You will probably have to replace it or exchange it for another new one.
 

Read other 13 answers
RELEVANCY SCORE 55.2

i have a usb to lpt?? (old big printer plug) cable which connects my printer to my computer.
this works when connected to my XP machine.

but i have plugged into my new 7 machine and it wont work.

I have tried and failed at adding via network from 7 machine (printer connected to XP machine).

I have just tried plugging the printer into the 7 machine, printer and devices shows an IEE-1284 controller windows continues and installs to hp deskjet 710c, but doesnt print anything.
i try to add a printer and use the 'virtual printer port for usb', it installs and says its working, but it wont print anything.

any hints or help greatly appritiated.

A:help HP deskjet 710C wont print from 7 machine

It would very much be of great assistance if you could fill out your specifications on your system profile. This allows us to answer your questions knowing a bit about your system and reduces asking questions over and over. Also if you ask a question and have to go off and do other things the last thing you want is more questions to answer when the idea was to get your problem solved.

So no the questions begin, what version of Windows 7 are you using 32 or 64 bit? How are you converting your LPT connection, is it by means of a Centronics LPT to USB connector? IF that is what you are using it had problems working in Vista 64 bit so I imagine it hasn;t changed in Windows 7. It needs a real LPT connection.

Read other 4 answers
RELEVANCY SCORE 55.2

My laptop has Windows Vista Home Premium installed and I can't get it to print to my HP Deskjet 995C. When I try to print, I get a 0.0000007a error message. HP website says this printer is not supported in Windows Vista. Is there any way I can work around this or do I need to go out and buy a new printer?
 

A:Can't print to HP Deskjet 995c from windows vista

Have you installed drivers for the printer? I think one of theses is your printer and vista drivers are available http://h20180.www2.hp.com/apps/Look...1&h_query=Deskjet+995C&submit.x=10&submit.y=7

Post back if it still doesn't work.
 

Read other 1 answers
RELEVANCY SCORE 55.2

Hi!

I'm hoping someone here has some better ideas - I'm pretty tech savvy and this one has me totally defeated.

I have a home business and I use a wide format printer, an HP Deskjet 510c that was working great via a small print server running on a Raspberry Pi until 2 days ago. I was experiencing some lag with a software program that is specific to my business and my husband decided he would be helpful and "fix" it. He has no idea what he did but now I can't print to this printer even when it's directly connected to my PC.

I am not having any issues printing to the other printer, a wireless standard-size laser printer.

Jobs just don't show up in the queue at any paper size other than 8.5 x 11 when the printer only has a 42" roll, not 8.5 x 11 sheets. There seems to be no way to tell it that it contains a roll because when I select the correct paper size from the print dialog box, it simply doesn't put the job in the queue. The printer itself is set up for the roll and knows the roll is there. I can get it to print a test page or a single line of text from notepad, provided I tell it the media size is 8.5 x 11, which it then prints on a 42" x 11" strip of paper without protest.

What we've tried:

1. Uninstalled and reinstalled driver. Printer no longer has drivers on HP's website so apparently husband found one on some 3rd party site (sigh).

2. Updated all relevant software and windows updates

3. Disc... Read more

Read other answers
RELEVANCY SCORE 54.4

I just purchased an HP Deskjet 2130 with free Hallmark Print Studio software.  I keep getting a message that the code is not valid.  I have tried it with the dashes and without and no luck.

A:I just purchased an HP Deskjet 2130 with free Hallmark Print...

That is supposed to be a free download.  Another inquiry/replies can be found here.

Read other 1 answers
RELEVANCY SCORE 54.4

Dual question on the same machine, that might actually be related.

This machine is a laptop running xp pro, that is linked to a desktop also running xp pro...

The desktop is serving a printer over the network, that both machines can print to fine...

The laptop however, cannot print anything in quicken. No printers to select.

In addition, I cannot install this hp printer into the laptop though i am installing it accordin to the instructions. I first load the software, than when prompted, connect the printer, than it takes a while, but it eventually continues, and finishes the installation. However, the printer does not show up as an available printer in the control panel, and is nowhere to be found in the machine. I tried uninstalling and reinstalling, and then uninstalling and removing th registry entries under software in regedit, and then reinstalling, but that did not work either. The computer is 2 weeks old. Any and all ideas welcome and appreciated!
 

Read other answers
RELEVANCY SCORE 54.4

it was working just fine the last time i used it (about 4 days ago) and now when i tried to get it to print something it took the paper part way in,and then it just stops and while the power light stays on,the yellow light above it flashes,and i get the little yellow ! that pops up in the bottom right saying "this document failed to print" ive checked my ink cartrides and connections,and deleted and reinstalled the printer as well.any help would be appreciated,thx
 

A:HP deskjet 600series printer wont print. error msg...........

go to the device manager, locate your printer, and right click it, and update the driver. see if this works
 

Read other 2 answers
RELEVANCY SCORE 54.4

Hi friends,Everything has worked perfect until today!My phone is a Samsung Galaxy S6. I have a HP DeskJet 3520 AIO.Today, when trying to print from either the email app TypeApp or Telia E-post app I can not!Yesterday it worked just fine...!(To print other documents though works just fine, just like before.)I get the message (translated from Swedish): "It was impossible to change the settings. Try again."Then the "AIO hp printer app" gets "locked" in this status. Trying to "back out" using the bottom right button doesn't work.Pressing left bottom button takes you out and I can close the app.I have tried many times. I have forced stop on all included apps, cleaned casche and also un- and rein-plugged the printer powe cable.I have also cleaned the phone from all trash, checked for viruses etc.I have shut of and restarted the phone.I have also uninstalled and reinstalled ALL apps as well as the Printer, but problem doesn't go away.Please help!Med vänlig hälsning / Best RegardsJohan

Read other answers
RELEVANCY SCORE 54.4

I migrated my HP Deskjet 870Cxi from a WinXp laptop to a new Win7 32bit laptop. I use a parallel to USB printer connector cable. The printer works fine under WinXP.
Now the printer will not print under Win7. All jobs are held pending. I can confirm under Windows Devices and Printers that 870c printer driver is recognized. I tried to print a page from Notepad, a test page and text alignment page.

HP website says that Win7 has all the drivers and it will load them. I confirm that Win7 does load drivers for 870c but NOT 870Cxi.

I checked Windows 7 hardware compatibility at Microsoft.com where it lists a couple of hundred Deskjets that are compatible including 870c, but it does not even list 870Cxi. The nearest comparable listed model is 890Cxi. But again the drivers for 890Cxi is already loaded on Win7 32bit. But Win7 chooses 870c.

I was hoping to rely on HP 890Cxi backward compatibility with Win67

Now I am stuck. Can anyone help please?
 

A:HP Deskjet 870Cxi wont print in win7 32bit

Those drivers are usually for a number of models at the same time and I expect that they will work fine for your model, too.

They installed all right, didn't they?

If the driver installs a virtual port, try changing the port number.
 

Read other 2 answers
RELEVANCY SCORE 54.4

I have been going through the same thing.  Changed cable companies a while ago and have yet to be able to get the printer to work with the new wifi.  Been fighting with it tonight, and can't get anywhere.  When I pull up the printer IP, it shows it is connected to my network but not to "ePrint."  I have also tried every solution that I could come across and still can't get anything to work.  Did you ever get this resolved?Thanks!

Read other answers
RELEVANCY SCORE 54

Hi Folks,

After I installed the new Mozilla Firefox browser, I've been unable to print. I don't know how that could happen -- I don't see the connection. I tried reinstalling the printer software, but that didn't work.

Do you folks have any idea what could have happened?

Thanks in advance!
 

A:HP Deskjet 932C Printer Problem - won't print since I changed browsers

Read other 8 answers
RELEVANCY SCORE 54

First, some background. I had this all set up and it was working. I installed 2 other printers and drivers and started having problems with my computer hanging up and other issues with the HP software. I decided to uninstall all of my HP software and drivers and start over.

I have 2 printers--HP Officejet Pro L7580 and an HP Deskjet 9650 that I want connected with the print server.

I downloaded the new drivers for the deskjet 9650. I have the software installed for the print server. I can open that software with my laptop and see the print server. I started installing the printer drivers using a wiresless network, but it couldn't find the printer.

I tired restarting the print server, but still it cannot find the printer. I tried putting in the IP address for the print server, but when I do it says that the HP deskjet 9650 installer has encountered and error, and it closes.

Any suggestions?
 

A:Trouble installing HP Deskjet printer with Zonet print server

I solved my own problem! Thanks anyway
 

Read other 1 answers
RELEVANCY SCORE 53.2

I get this problem after printing a page or two over a shared 1220C. I have to always click 'skip' or something. Beaucoup space on the hard drive, but I still get this message.

Any help, greatly appreciated.
 

A:Net Print on HP DeskJet 1220C--Insufficient Disk Space, Spooling Problem

Read other 7 answers
RELEVANCY SCORE 43.6

Hi everyone,

To help manage the department I work for (cleaning for a poultry processing plant) I am currently reviewing Quality inspection results which have been entered into Excel. It is about 30 pages long if I printed the full version out.

I am looking for someone to help with a mini program which will only print out the data rows which I need to review. Eg. If machine 1 (Row 20) was found to have not passed a check but machine 2 (Row 21) passed, then I would like to run a little program to only print Row 20.

As I am almost a novice at this stuff I'm was hoping that this may be a simple program and that someone might want to help me out. If it isn't or I am asking too much please tell me and I won't post anymore messages.

Thankyou for your time if you have read this message.

p.s - I did know enough to add a IF formula which tells me if the row should be printed or blank if it doesn't. I have been using that to review my data on the computer screen.
 

A:Solved: Help with Excel so when I print only revelent data (rows) print out??

Read other 7 answers
RELEVANCY SCORE 43.6

Set up the worksheet to print with a landscape layout on a single page. Only printed first column and did so in portrait. The print preview looked good before printing. The worksheet can be printed in portrait mode.

Operating system : Vista (32bit) SP2
MS Office Home and Student 2007
Excel 2007
Printer : HP 209A All in One
Drivers: latest installed
 

A:Solved: Excel 2007 Print Issue - Cannot print landscape

Read other 7 answers
RELEVANCY SCORE 43.6

Friends, I have a report with eight subs. I was trying not to show empty sub, and in subreport also part white.

Resolved, but to place it can shrink and can expand,
for all sections of all subreports also placed time zero for all subreports.
In the event when loading the subreport I repeat this code for each sub:
if Me.Filho0.Report.HasData Then
Me.Filho0.Visible = True
else
Me.Filho0.Visible = False
end If
In the event if you are not given for each sub I put:
cancel = True
As I open the report it is all empty, but when I print, it prints perfectly, if the sub is no data, shows
and also the sub fully expand.
Only when I open'm not seeing anything.
Thank you.
 

A:Solved: Report is blank when opened. Print preview ok. Print ok

Read other 6 answers
RELEVANCY SCORE 43.2

Please / Thanks: Windows XP 5.1 SP3; just got the HP printer noted above; it's been sitting in an office for about five years, lonely; worked fine, she says; downloaded/installed what I could e-locate for the model; my PC tells me all is well with the newbie, but when it comes printtime, the paper moves through appropriately, the appropriate sound of the ink mechanism moving back and forth is heard, but the grand result is, merely, a blank sheet of paper. The ink cartridges and electroconnection points are clean and dry.

Shall I conclude that the souls of the ink cartridges have flown the bodies after having been unattended and unused for such a length of time? Haven't tried new cartridges yet. Or is there something else I should be attending to?

Thanks / appreciated.
 

A:Solved: HP Deskjet F340 All-in-One

I have a HP Deskjet F340 All-In-One and have used it through Windows ME and XP and Vista and 7, so it has served me well for several years.

If yours has been stored unused for 5 years, the ink cartridges definitely need to be replaced.

Here are pictorial instructions on how to replace them.

It uses HP 21 black and HP 22 tri-color cartridges.

----------------------------------------------------------
 

Read other 3 answers