Over 1 million tech questions and answers.

My most complex surgery I ever did

Q: My most complex surgery I ever did

Yesterday I spent two hours opening a Radeon 5850, cleaning and lubing it. It was noisy as hell and now it's quiet, so time well spent.

RELEVANCY SCORE 200
Preferred Solution: My most complex surgery I ever did

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: My most complex surgery I ever did

Did you happen to document your progress? Like take pictures of the before, during and after? How about recording fan speeds and temps for the before and after? What did you use to clean it?
Just thinking if someone comes here looking for information on how to do what you just did, by having such information attached, it may very well help that person make a decision on doing it themselves versus bringing it to a "Computer Repair" shop.

Read other 4 answers
RELEVANCY SCORE 48.8

Hi,i was hoping someone can tell me what i should do next.i had Empire monkey
virus and cleaned it from my computer ,you were recommended by the people over
at McAfee,they said someone can explain what to do next.

respectfully,
LL
 

A:After the surgery!

Hi,
From what you say I think you need to post a HijackThis log and then wait for someone qualified (gold shield next to their name) to take you through what needs to be done. Please go no further than the steps below and posting your results for now.You may want to print off this guide just in case.

Using Hijackthis with the self-installer that puts it into Program Files for you:

go to Click here to download HJTsetup.exe

Save HJTsetup.exe to your desktop.
Double click on the HJTsetup.exe icon on your desktop.
By default it will install to C:\Program Files\Hijack This.
Continue to click Next in the setup dialogue boxes until you get to the Select Additional Tasks dialogue.

Put a check by Create a desktop icon then click Next again.

Continue to follow the rest of the prompts from there.
At the final dialogue box click Finish and it will launch Hijack This.

Click on the Do a system scan and save a log file button. It will scan and then save the log and then the log will open in Notepad.

Click on "Edit > Select All" then click on "Edit > Copy" to copy the entire contents of the log.
Paste the log in your next reply.
DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.

Once you've done this, hang on for further guidance.

Richard.
 

Read other 3 answers
RELEVANCY SCORE 47.6

Presario V3000 laptop, XP, NVIDIA GeForce Go 6150, drivers up to date, so Windows says.

Modem went out, sent to HP twice. Finally fixed. They had to change main board. Now it looks like a wide screen TV receiving nonHD signal and stretching it to full screen. What should be a square is wider than tall.

Also seems to be glary. White fonts on desktop under icons were opaque until I changed to bold font. Menu font (black) sometimes seems to fade together.

It's probably settings, but I don't know where.

I can call HP (AGAIN) but (no offense to anyone) I just hate to talk to people I have trouble understanding. Thought someone here might be able to help.

Appreciate any help.
 

A:Solved: After HP 'surgery' display not right

Read other 16 answers
RELEVANCY SCORE 47.2

Hi all,
Haven't made a post in a long time and I'm surprised my account is still active.

Here's the verdict; my laptop came shipped with an OEM Windows Vista installation. I wanted to dual-boot it with Windows XP but needed XP on the C: partition (plus the issue with older version of windows should be installed before a new version is installed) forced me to re-format, install XP SP3, install all the drivers and bring me to what it is now.

My laptop is fully functioning with Windows XP. I have a Linux Ubuntu 8.04 CD, Windows Vista OEM dvd and windows xp sp3 cd at hand. I want to dual boot my system with either windows vista, linux, or both.

Please answer these two questions:

1.) If I create a new partition and install Vista on the new partition, is it possible to upgrade the Vista installation to Windows 7 WITHOUT DOING ANY HARM AT ALL TO THE XP PARTITION OR IT'S BOOT LOADER? So I will then have a dual boot system with Windows XP and 7 (and both OS's fully working)?

2.) If I install Linux in a new partition alongside my XP partition will it be possible to install vista on a third partition AFTER I have installed Linux? So the order in which the operating systems have been installed would be:
- 1. Windows XP installed first
- 2. Linux Ubuntu installed second
- 3. Windows Vista installed third

Any help will be very much appreciated (as long as it's from someone who knows what they are talking about).

Thanks

Read other answers
RELEVANCY SCORE 47.2

Good morning, all! I would like to transplant a Samsung EVO 850 SSD into my Ideapad Z580 notebook from another machine of mine. The SSD has a different OS on it (Linux Mint) than what is on the Lenovo's HDD (which is Windows 8.1), and it is also half the size of the HDD (SSD=250GB, HDD=500GB). When I attempted the transplant, the Lenovo would not boot up past the opening screen and gave me an error message that stated something along the lines of (it went by fast, so I couldn't get the exact wording) "PCI (?) media test failure, please check cable." When I put the original HDD back in there, it booted up as though nothing had happened. I'm wondering why this happened, and would putting a new SSD in there to do a clean install of my OS of choice be preferable? Also, when I attempted to use both a USB drive and a disc to install my OS of choice on it, I could not get it to boot from either of those options in BIOS. What am I doing wrong, here?

A:Ideapad Brain Surgery Not Working!

I would expect it to work.  Are you sure the SSD is good?

Read other 1 answers
RELEVANCY SCORE 47.2

Hi I think there,s a problem in here. I have BB (Comcast) running XP sp2 IE sp2
i'd sure be grateful if someone would please take a look ay my HJT? My puter is running so slow at times and doing other strange mysteries. I thought at one point I may be have a trojan, but NIS , S&D, Spyware Dr and Spywre Blaster & Ad Aware don't pick anything up. Thank you all. Bad

Logfile of HijackThis v1.99.1
Scan saved at 10:28:57 AM, on 5/1/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\SYSTEM32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Nhksrv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\EPSON\EBAPI\SAgent2.exe
C:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton Internet Security\Norton AntiVirus\SAVScan.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Common Files\Symantec Shared\Security C... Read more

A:i tnink this puter needs some brain surgery

Read other 8 answers
RELEVANCY SCORE 46.8

Both epithelial- and genes associated with the argument. Strikingly, when he was interrogated expression of the genetic signature of stem cells in the two cohorts TNBC independent large tumorMiracle Bust s with the signing of stem cell activation showed more likely to relapse in the first years after diagnosis, compared with lower scores enabled to stem the si Miracle Bust Reviews gning of cellular genes. In contrast, in three groups of ER + breast cancer independent of large data, which are tumors activate the stem cell signature identified at least prone to metastasize. Discretion issued by stem cell gene .

http://www.optimalnutritions.com/miracle-bust-reviews

Read other answers
RELEVANCY SCORE 46

Hello, I'm Audiotape and I'm in a bit of a pickle,
 
 
--- Before you read the meat and potatoes, I made my thread here as I don't have an active out of control infection or major booting problem, but please let me know if I accidentally bleepposted somewhere and will attempt to fix my post lol. You might be able to avoid reading this whole thing because I have given you (what i think) is the most important info in the next three paragraphs. ---
 
 
Meat and potatoes
 
Yes, as the thread title partially suggests, I ran disk cleanup, Eraser, unhide, rkill, Fixexec, Combofix, and finally Malwarebytes in a normal boot, without being asked by a helper. I have other minor computer issues and although neither new issues nor previous issues were caused or exacerbated by Combofix, respectively, I feel you should know about them.
 
 
Why? Took the advice of another forum and I think they are erroneous. The professionalism and shear number of threads and guides I have seen here suggests this. 
 
 
Everything below this might be info contained in some log Il be asked to produce, idk, but regardless I provided background info. Hope I didn't waste time. Since idk how things work on this forum, if you know what my next steps should be and will stop reading now, atleast skip to the note in red below please!
If not, onward!
 
 
 
 
 
 
I did not run Comb... Read more

A:Performed Surgery On My PC With No Knowledge Of Post-Op Care...(I ran Combofix)

Since you ran combofix, Please follow the instructions in ==>This Guide<==.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include the link to this topic in your new topic and a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Once you have created the new topic, please reply back here with a link to the new topic.

Read other 4 answers
RELEVANCY SCORE 45.6

AUBURN, Ala. -- Auburn All-Southeastern Conference linebacker K.J. Britt will undergo thumb surgery.
Team spokesperson Kirk Sampson said Thursday that Britt is scheduled to undergo surgery on Friday, a day before the 13th-ranked Tigers host Arkansas. It wasn't immediately clear how long Britt will be out.
Britt is leading the team with 23 tackles through two games, including one tackle for loss. He was a first-team Associated Press All-SEC pick last season and is a team captain.
Britt had 69 tackles last season, including 10 for a loss and 2.5 sacks. Freshman Wesley Steiner is listed as his backup.
Fellow linebacker Chandler Wooten had already opted out for the season.
More site:cffanstore.com

Read other answers
RELEVANCY SCORE 38

I've got two identical machines except one doesnt boot. Now before you all flame me re reading other posts, this has not been covered by anyone I guarentee.

I worked out that my proccessor must have had it, when I replaced my p2 450mhz procc. from my working machine into my non working machine and hey presto my machine that didnt work now does. So I went to a second hand computer dealer and bought myself a p2 233mhz procc for approximately £10.

Anyway I took it home and plugged it in with a fan and it doesnt work, so I took it back to the shop who tested it for me and it worked AAAAARRRRRGGGHHHH.
 

A:Too complex for me hopefully not for you

Read other 16 answers
RELEVANCY SCORE 37.6

okay so, i have a router that has cable internet directly fed to it, and i have my main pc connected via network cable, because my main pc does not have a wireless card...i live in an apartment and have noticed other tenents accessing the MY internet connection wirelessly through my router... i would just remove the antenna's, but i also use the wireless internet on my other pcs throughout the apartment. when i plugged the router into my pc i did not set up a wep protected network, but when i go back to set up a new network, it tries to look for an internet connection, which it doesnt because i am all ready connected through another network!!
please help my change the settings of my existing network to set up wep!

A:How to set up a WEP in a complex situation

Originally Posted by Bungled


...when i plugged the router into my pc i did not set up a wep protected network, but when i go back to set up a new network, it tries to look for an internet connection, which it doesnt because i am all ready connected through another network!!



Can you please try to explain that a different way, and perhaps add a bit more detail? I'd like to help, but I don't understand the bit above and I suspect it's significant.

Read other 3 answers
RELEVANCY SCORE 37.6

Hello, (thank you all in advance)......

Approximately 6 months ago, my computer crashed and had some serious issues when i had left it alone. The monitor would be on, but it would not recieve data from the pc, and i tested out the monitor and hard drive. Both worked fine, so i assumed it was something else not working. Also, the computer smelled like burnt rubber somewhere(??) when turned on. this being a safety hazard, i opted to leave it alone.

As of black friday, i decided to resolve my computer issues and ordered new RAM, new power supply, and a new GPU. This did not solve my problems however, for my pc still would not boot up. I than ordered a new motherboard as well, and this made some progress in my case, but nonetheless, my PC would just boot to the screen that asks "safe mode, safe mode with networking last known good, etc" and when i selected an option would crash. After this fiasco, i accepted my fate and replaced the only thing left, the harddrive. I now own a 500gb WD but now it says on boot, "Disk I/0 error: Status 00003200".

Finally, i am near wits end because everything has been replaced (except for the case, lol) and my computer still will not boot, or accept any new operating systems. It has been far too much time, money or effort, than i have anticipated, and for the money spent i could have simply bought a laptop, but unfortunately i did not keep track of all the receipts.

Right now, it is somehow loading the win2k pro OS ... Read more

A:Complex Problem

If you replaced the motherboard, the LEAST you need to do is a Repair Install of XP. All of the drivers etc... from the previous motherboard will not work with the new one. The whole original XP Install was configured around that motherboard, and will not work with a new one, most of the time.

It's recommended to do a New Install of XP after changing the motherboard. You will also need to run the motherboard driver disk immediately after the install.

Read other 3 answers
RELEVANCY SCORE 37.6

Gday guys i have a bit of a complex issue on my hands.

Im running a 2ghz core 2, 2gig ram dell m1210 (laptop) running vista sp1.

Now, about a month ago my gpu died, and i managed to get into my settings and disable my graphics card drivers so i assume my screen (which is working) is running on integrated graphics or something (max resolution 1024*768).

I want to upgrade to xp sp3, as i use processor intensive music production programs regularly.

So, how do i go about this without bricking my computer.

The main problem is the need for my computer to run on intergrated graphics as opposed to the gpu which is useless while im installing and running xp sp3.

I hope this makes sense.

Cheers for your help!!!

***If this is in the wrong thread can you please move it where appropriate!

A:An Complex Issue

Could you not build the OS on a different machine and Ghost the Hdd? It's just a though to get you out of a sticky situation!

CP.

Read other 1 answers
RELEVANCY SCORE 37.6

Summary of problem:
My family has been having trouble with this laptop for some time now. I've taken up the task of trying to solve whatever problem it may have. I find myself at a dead end though. I found that the computer, get this, had no anti virus protection. So I installed AVG. However, AVG will not update.

My list
1. Internet explorer works 50/50. "Aborts operation" Checked the proxies and just about whatever Google had to offer.
2. No other browsers will work
3. Windows update doesn't work -- And if it does the updates render the computer's internet connection worthless
4. Updates on anti virus security do not work
5. Portable Spybot S&D and ClamWinPortable found nothing.

ClamWin and Spybot S&D were downloaded, installed, and updated on a fully functioning computer and installed onto a USB flash drive.

ClamWinProtable Scan

Scan Started Sat Mar 12 17:24:49 2011

-------------------------------------------------------------------------------



WARNING: Can't open file C:\Boot\BCD: Permission denied

WARNING: Can't open file C:\hiberfil.sys: Permission denied

WARNING: Can't open file C:\pagefile.sys: Permission denied

WARNING: Can't open file C:\ProgramData\Microsoft\Search\Data\Applications\Windows\tmp.edb: Permission denied

WARNING: Can't open file C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb: Permission denied

WARNING: Can't open file C:\Users\All Users\Microsoft\Search\Data\Applications... Read more

A:A Complex Issue...

Since the machine has not had any active AV and probably is missing a lot of Windows updates I would suggest starting here:
NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help

Another option would be to back up any important files and either restore an image if one is available or re-install the OS clean.

Read other 4 answers
RELEVANCY SCORE 37.6

A few days ago I began noticing ads EVERYWHERE for Vimax weiner enlargement pills. I though they were a little racy, and I even complained to several companies for advertising their products. Needless to say, I discovered that all the Winky advertisements that I had seen over the past few days were not a sign that my [I]hardware[I] needed a 4" boost, but that my software was corrupt!

I've followed several other sites to see if there is a solve-all fix for getting this ad injector malware off of my computer. It seems that everyone has a differient fix. This site seems incredible, and many people have effectively been freed from the constant man organ shaming.

Here's my info: Thanks in advance to everyone who can build my self confidence back up.

DDS (Ver_09-01-07.01) - NTFSx86
Run by ryan.debok at 21:49:11.56 on Wed 01/07/2009
Internet Explorer: 7.0.5730.13 BrowserJavaVersion: 1.6.0_11
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.1014.473 [GMT -6:00]

AV: BitDefender Antivirus *On-access scanning enabled* (Outdated)
FW: BitDefender Firewall *enabled*

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\Program Files\Common Files\BitDefender\BitDefender Update Service\livesrv.exe
C:\Program Files\BitDefender\BitDefender 2009\vsserv.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\syst... Read more

A:I was starting to get a complex

Hello and Welcome. Please subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Before beginning the fix, read this post completely. If there's anything that you do not understand, kindly ask your questions before proceeding. It is IMPORTANT that you don't miss a step & perform everything in the correct order/sequence.

---------------------------------------------------------------------------------------------

Please visit this webpage for download links, and instructions for running combofix:

http://www.bleepingcomputer.com/comb...o-use-combofix

* Ensure you have disabled all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

Please include the C:\ComboFix.txt in your next reply for further review.

Read other 3 answers
RELEVANCY SCORE 37.6

Long story short, I'm a private instrument teacher and am trying to create a workbook to help create invoices, manage attendance, etc.

The problem:
I need an equation (if one exists) that, I believe needs to include, but is not limited to: INDEX, MATCH, IF. I have a list of dates generated for every Tuesday of the academic year in Worksheet A. In Worksheet B, I will be keeping attendance. In Worksheet C, based on the dates listed on Worksheet A and the attendance in Worksheet B, I need to generate a list of the Tuesday dates for April. I cannot just use date equations because I need the changes I make on Worksheet B to show up while this whole thing references Worksheet A.

This has been blowing my mind for about three hours. If I need to post anymore info to help, please let me know.

I'll try to include some screenshots to help out:

Worksheet A:
https://picasaweb.google.com/Moosetrombone/ExcelProblems#5725203779152416290

Worksheet B:
https://picasaweb.google.com/Moosetrombone/ExcelProblems#5725203782838294242

Worksheet C:
https://picasaweb.google.com/Moosetrombone/ExcelProblems#5725203760366692482

All items are in Row 11
 

A:Complex Formula?

Read other 6 answers
RELEVANCY SCORE 37.6

I believe this one is a hard one. I will try to provide as much info as possible. I have a labtop which ws given to me from my school. My school has a wireless set up which uses Novell. At home I have a wireless Windows setup. So I attempted to make my school labtop get on board with my home PCs. At first everything worked out for the best without much setup needed. My labtop showed that it detected the wireless network and it connected to it and to the internet. All of a sudden for one reason or the other during a online game my MSN Zone connection will be terminated and right after it disconnects me my wireless network connection is gone. But a second later it pops up again. But it says something like "you have two wireless networks to choose from". Im not sure where the other one came from but I know that one is garbage. I am using a wirless linksys router and everytime I sign on with my labtop instead of going through their novell setup which is password protected I just log on as a windows workstation. If anyone knows any problem I am overlooking feel free to help!

On the other hand lol, I know and respect the helpers on this site enough to know that if no one answers that it was a bit much to ask! Dont worry about it! (im serious)

Mike
 

A:MSN ZONE ( Complex I think)

Read other 11 answers
RELEVANCY SCORE 37.6

I have a complex problem. Here are the (strange?) symptoms. I am running windows Xp. A few days ago my internet connection came up as limited or no connectivity. All of a sudden B1.exe, B2.exe, B3.exe, etc. Started filling the desktop. I used system restore and everything was ok for a couple of days. Now, I have several problems. First, explorer.exe is using between 60000 to 100000k on the task manager. Two, sometimes the desktop just disappears. No error message or anything. Three, when using internet explorer, the cursor goes away randomly like it's running in the background, but there are only popups sometimes. Four, now I only get a black screen when running in safe mode. I run the taskmgr and try to open the desktop, but it will only come up for a few seconds. Finally, I have noticed today that all of the desktop icons seem to have a blue outline. I am running Defender Pro antivirus and spyware protector.

A:Complex Problem

Post a Hijack This log in the Hijack This Forum by following the directions in the link below. DO NOT post the log in this forum.http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/

Read other 1 answers
RELEVANCY SCORE 37.6

So here's The Problem. I have set up a complex network in our house. The internet comes from a phone line which is then plugged into a belkin N1 vision router. There is another wire coming out of the router and into a Time Capsule which broadcasts the internet, printing and file sharing around the house. We have three computers in the house: A windows XP desktop, a Macbook Pro, and a windows 7 laptop. Both laptops can connect to the network just fine, with wireless printing, but the desktop can connect to the internet fine, but when printing prints out junk. The steps i have taken to stop this are as follows:

Re-install drivers
install Bonjour
Install AirPort Utility
Restart computer, and printer
change various wires in the network

i know its a long question but i need help, PS the printer is a photosmart 8150
 

A:complex problem

Read other 15 answers
RELEVANCY SCORE 37.6

Hi everyone,

I am currently trying to repair my mom's Compaq Presario SR1950NX, which has a couple of conflicting problems:

1) Not recognizing USB/PS2 mouse or keyboard even during POST
*Occasionally, a PS2 keyboard will work, but that pretty much only happens when the system decides to boot into the OS. And that brings me to...

2) Only boots into the OS *sometimes*
*By "sometimes", I mean like once in every 15-20 boots or so. While WinXP and Win7 were loaded, I got the "corrupt/missing C:\\WINDOWS\system32\ntoskrnl.exe" error during most boots (started with XP, got that error; installed 7, still got the error), but every once in a while, I could get all the way to the OS, but the mouse wouldn't work and the [PS2] keyboard sometimes would and sometimes wouldn't work . Today I clean-installed Win8 (with a PS2 keyboard and no mouse) to see if that would fix the problem, but no dice. After the manufacturer splash screen, the system displays a blinking cursor on an otherwise blank screen and just sits. Also, since the input devices don't work, I can't see or change the BIOS settings.

Any help would be IMMENSELY appreciated, as I have been working on this thing for almost 2 months. :-/
 

A:Complex PC issue

Read other 12 answers
RELEVANCY SCORE 37.6

So, I was on isohunt.com (I have inspiron 6400 media center xp)
I got attacked backdoor.win32.agent.ich (something like that)
I got this security icon which wouldn't exit.
The computer got really slow.
Macafee stopped working.
System restore would open, but after pressing the next button upon selecting a date, it wouldn't proceed. The
I used hijackthis and clicked on all of the options (ending up worseing the situation, don't ask my why).
I am on safe mode now, system restore still didn't work.
I used registry mechanic and regcure to see if the computer works normally in normal mode. After the softwares fixed the problem, it still didn't work in normal mode.
So, I tried to install sr.inf (something happened and windows system restore lost all the points)
The computer welcomes me normally (starts normally), but after I click on start and other stuff, it doesn't respond.
It only responds in safe mode.
repairing windows is not working because its asking for a password. I don't have a password.
I don't want to lose my files. I am applying to pharmacy schools and got interviews lined up.

Can anyone crack this issue?
I have sp3.

A:A very complex problem

Help anyone? please

Read other 5 answers
RELEVANCY SCORE 37.6

If the PC componentry is sending noise through the system board and out the speakers then are the drivers responsible and if so which one - the motherboard, sound card, OS. Does XP contribute to the probelm?
 

A:Very complex - no hacks please

i had that - it could be power cables close to the audio cables or IDE cables

i had that where if i turned my volume ALL the way up and put in acd - i could hear the cdrom giving feedback and reving up.
 

Read other 2 answers
RELEVANCY SCORE 37.6

Hello fellow It people, i bring to you a confusing situation we have at our company.
I work for a radio station in phoenix, we bought 4 computers from a company that refurbishes pcs. They are ALL IDENTICAL well they have a couple differences
The ONAIR, PRODUCTION ROOM, and STREAMING pcs are IDENTICAL the ONLY difference is that the ONAIR has a larger hard drive and THAT IS THE ONLY difference.
all of the pcs in question have the following specs
DELL OPTIPLEX 745 MINI TOWER
Processor x86 Family 6 Model 15 Stepping 2 GenuineIntel ~2126 Mhz
the machines all say Intel Core 2 Duo on them
4 GB RAM
160 GB HDD (SATA)
CD ROM
WIndows XP sp3 (Exact version is 5.1.2600 Service Pack 3 Build 2600)
All machines have the following BIOS version (BIOS Version/Date Dell Inc. 2.6.6, 6/26/2011)
we use XP on these machines because the sound hardware we run is professional sound cards that are run by PCI cards installed that run cables to breakout boxes to external devices, we use hardware by Echo Audio, Aardvark Sound, and M-Audio Sound.
Whenever we try to install the ECHO or ARDVARK into ANY of thesem achines the driver installs and as soon as it is accessed (a sound is played from it) we see the following thing happen to the machine, this happens on EVERY machine (makes sense since they are all identical) 
the STRANGE thing is we have ANOTHER pc that we did not purchase from that company, it is an older dell as well, and when we install the echo, or aardvark on this machine it functions per... Read more

A:A Complex situtation

The optiplex sometimes have a sub-bios called intel AMT. See if Disabling it works.  In BIOS, Advance chipset Feature ->Intel AMT (Enabled,Disabled).

Read other 18 answers
RELEVANCY SCORE 37.6

I have just built a system
Asus P4S8X Mobo,
P4 2.53Ghz,
256MB DDR (PC-2700)
ATI Radeon 9700 Pro,
Sound Blaster Audigy Gamer...blah,blah, blah...

The system when I started it powered up, but would not POST and the monitor did not come on.
I then took my 9700 out and put my brothers GeForce4 Ti4200 in, and the system started fine.
No problems.
I put the 9700 in my brothers system, and it was fine.

I then uninstalled the GeForce4, added the ATI 9700 Pro drivers, and powered off.
Changed the cards, and the same thing happend.
The system powered up, but would not POST and the monitor would not come on.

When i put my brothers GF4 in, my system started in the BIOS screen for safe mode, and it had a message that read,
"During your last bootup, the system hung due to a low CPU speed setting...."
It then told me to check to make sure the systems BIOS was supporting my CPU speed.

Why would a video card change the CPU speed setting, and how do i change it to make the 9700 work on my system?

*Things to remember....
My system worked fine with a GeForce4 Video card, and the ATI Radeon 9700 Pro worked fine in a different system.

Please help, this system costed me a lot to build, and I am sick of owning a 2,000 dollar paper weight.
TIA.
 

A:A complex problem

Read other 16 answers
RELEVANCY SCORE 37.6

Hi All,

I have 2 relatively complex questions. The first is about NTFS-3G. I have a large .m2ts file and placed it on my NTFS formatted HDD. I would like to plug my NTFS formatted external into my PS3 to try and watch that .m2ts file. However, PS3 doesn't recognize NTFS because it is a format used only for Windows. With FAT32 (which PS3 does recognize), you can only fit a maximum individual file size of 3.99GB, but this .m2ts format is obviously much larger than that, being that it is direct BD format. Is it possible to format my external HDD in NTFS-3G? I read up on this and hear that NTFS-3G works with many OSs including Linux and Unix, as well as the Mac OS. It also allows individual files to be larger than 3.99GBs. I would like to try to re-format my external to NTFS-3G and put my .m2ts file on it, then see if the PS3 will recognize it because as far as I know, the PS3 has a Unix like OS build. That's question one...any help on that would be dyno----mmiiiggght! lol

My second question is about over-clocking. I have a Dell Studio XPS running an Intel Core 2 Duo T9550 @ 2.66GHz. This is a laptop. Is it worth over-clocking, as I do enjoy to game from time to time. Is it capable of safely over clocking...and lastly, if yes to the first over-clocking questions...how do I over-clock it?

Any help with any of this would be huge...I really appreciate it!

-John
 

A:Two Complex Questions

http://boardsus.playstation.com/t5/...dia-The-Best-UPNP/m-p/40712127/highlight/true
Interesting forum on using windows with PS3 and a great deal of ideas
 

Read other 2 answers
RELEVANCY SCORE 37.6

can a complex type be w/i a complex type or is that forbidden

current schema
<?xml version = "1.0" encodeing = "UTF-8"?>
<!-- Homework 1 for CIS 2858 -->
<!-- Leslee Herschfus -->
<!-- [email protected] -->

<xsd:schema xmlns:xsd = "http:/ /www.w3.org/2001/XMLSchema">

<xsd:annotation>
<xsd:documentation xml: lang = "en">
food element definition for homework 1
each food product has a unique id consisting of
a lower case letter and a 2 digit integer. the element
consists of a name, quantity and price.
if the item is perishable, the food element has a nutritional
description (amt of protein, fats, and calcium)
if the item is non-perishable, the stock element contains
the warehouse(s) id and name, and amt of stock available
<xsd:documentation>
<xsd:annotation>

<product xmins= "x-schema: homework 1-schema.xml>
<xsd:element name="product" type = "prdcttype/>

<xsd:complextype name=prdcttype>
<xsd:sequence>
<xsd:atribute name = "productid" use="required" >
<xsd:restriction base = "xsd:string">
<xsdattern value= [a-z](1)\d(2)"/>
<xsd:restriction>
<xsd:attribute name = "perishable" use="required" >
<xsd:restriction base = "xsd:string">
<xsd:enumeration value= "yes"
<xsd:enumeration value= "no"
<xsd:restriction&... Read more

Read other answers
RELEVANCY SCORE 37.2

I need the most complex answer one can come up with for "how to restart the print spooler service".

I have someone who thinks they know stuff asking how I cleared her stuck document, and want to make it look very complex.
Thanks.
 

A:Solved: need complex answer

Read other 10 answers
RELEVANCY SCORE 37.2

Hi. This is my first question at your forum, so please forgive me if I've somehow posted it incorrectly. But, I have problems I don't know how to resolve on my own and may develop into worse problems.

I have a Dell Inspiron 1501. It's running Vista 32-bit and Office 2007. I have a program called Anonymizer on it (www.anonymizer.com) and Norton Anti-Virus latest edition to come out.

Some time ago, I tried to update to IE 8 and it seemed to wreak havoc on my system. I tried to uninstall it. Made things worse. I took it to a computer repair store nearby and told them: My system often freezes when you turn the laptop on and I have to do Control + Alt+ Delete several times to get past the start-up screen. Sometimes it will start fine.

Other problems: Sometimes a gray box will pop up saying that the Semantec Framework has stopped working, or something like that (can't remember the exact words).

After taking the laptop to a local library once, the Anonymizer program stopped working completely. Their IT said it could have to do with IE8 not being supported but they couldn't say for sure.

Anyway, after I took it to their shop, they reinstalled IE8 but it can only run by clicking "Run as Administrator." The other problems....freezing at start-up, Sematec thing, are still there.

After a while, the CyberLink Power2Go program for burning CDs and DVDs stopped working. It says that no matter what I do, it cannot read any CDs or DVDs put into th... Read more

A:Complex Problem for Newbie

Sorry to say it, but it sounds too messed up to fix imo.

I would often suggest a Windows repair install for fairly serious Windows problems, but I think yours is beyond that.

Personally, I would backup all valuable data and do a full format and reinstall.

Make a clean start. And then use a drive imaging program such as Macrium Reflect to safeguard against future screwups.

It will be a fair bit of work, but probably less work than trying to fix a seriously damaged Windows - which may never quite be right again.

Good luck
 

Read other 3 answers
RELEVANCY SCORE 37.2

Hi All !

How do I get ans to complex sql queries . I mean , like ,

"Display the names of employees who are going to retire in the year 1980 , if the number of years one has to work in the company is 18 years ."

etc.

Are there any sources in the net from where I can download ans to these queries ?
Please help . . Any bright ideas where it can be downloaded for free ?
How do I get my post on top of the heap again ?
 

A:How to get ans to complex sql queries ? How to bump?

Prashanti said:

Hi All !

How do I get ans to complex sql queries . I mean , like ,

Are there any sources in the net from where I can download ans to these queries ?
Please help . . Any bright ideas where it can be downloaded for free ?Click to expand...

Try doing a google search for "SQL tutorial" to get information on the syntax for such queries.

You can download and run MySQL or PostgreSQL for free.
www.postgresql.org
www.mysql.com

MySQL works really well. I've used it to store resume's of jobseekers on a company website. Postres is supposed to be even better, but it's been far too long since I've used it for me to comment on it.

Let me know if that helps
 

Read other 1 answers
RELEVANCY SCORE 37.2

I have an apartment complex that I would like to set up internet for.

Actually, i had thought, what if I could provide internet to the tenants, but charge for it.... kind of like a hotel, but only on a month to month basis. Thinking, maybe $20.00 per month.

Has anyone deployed something like this?

The building is two stories with four, two bedroom units upstairs and four, two bedroom unit downstairs.

I have found a company that does this, www.internetapartments.net, I have not spoke to them yet.
 

A:$$ Internet for Apartment Complex $$

Read other 16 answers
RELEVANCY SCORE 37.2

Hi,

Below is my "iif" expression in access

=IIf([likelihood]="rare" And [Loss Given Occurrence]="Insignificant","2 & 3",iif([likelihood]="rare" and [Loss Given Occurrence]= "minor","2 & 3", iif([likelihood]="rare" and [Loss Given Occurrence]= "moderate","4 & 5", iif([likelihood]="rare" and [Loss Given Occurrence]= "major","4 & 5", iif([likelihood]="rare" and [Loss Given Occurrence]= "Catastrophic","6 & 7", iif([likelihood]="unlikely" and [Loss Given Occurrence]= "insignificant","2 & 3", iif([likelihood]="unlikely" and [Loss Given Occurrence]= "minor","4 & 5", iif([likelihood]="unlikely" and [Loss Given Occurrence]= "moderate","4 & 5", iif([likelihood]="unlikely" and [Loss Given Occurrence]= "major","6 & 7", iif([likelihood]="unlikely" and [Loss Given Occurrence]= "catastrophic","6 & 7", iif([likelihood]="Possible" and [Loss Given Occurrence]= "insignificant","4 & 5", iif([likelihood]="Possible" and [Loss Given Occurrence]= "minor","4 & 5", iif([likelihood]="Possible" and [Loss Given Occurrence]= "moderate","6 & 7", iif([likelihood... Read more

A:Expression You Enter is Too Complex - Help PLEASE

Hi! Welcome to TSG Forum!
try this one!

Code:
=IIf([likelihood]="rare",
Iif([Loss Given Occurrence]="Insignificant" or [Loss Given Occurrence]= "minor","2 & 3",
iif([Loss Given Occurrence]= "moderate" or [Loss Given Occurrence]= "major","4 & 5",
iif([Loss Given Occurrence]= "Catastrophic","6 & 7",""))),
iif([likelihood]="unlikely",
iif([Loss Given Occurrence]= "insignificant","2 & 3",
iif([Loss Given Occurrence]= "minor" or [Loss Given Occurrence]= "moderate","4 & 5",
iif([Loss Given Occurrence]= "major" or [Loss Given Occurrence]= "catastrophic","6 & 7",""))),
iif([likelihood]="Possible",
iif([Loss Given Occurrence]= "insignificant" or [Loss Given Occurrence]= "minor","4 & 5",
iif([Loss Given Occurrence]= "moderate" or [Loss Given Occurrence]= "major","6 & 7",
iif([Loss Given Occurrence]= "catastrophic","8 & 10","" ))))))
Just remove line brakes !
 

Read other 3 answers
RELEVANCY SCORE 37.2

I purchased and installed an I/O Magic internal DVD+-RW/+-R 16x dual format double layer DVD writer. When I put in a real DVD, i.e. a rented movie it works as advertised with no problems. However, when I place a disc that is recordable DVD media burnt or unburnt the drive seems to think that it is only a CD player.

I have an AMD Athlon 3000+ running Windows XP Home Edition with 512mb of Ram.

I am seeing the changes between the recognition of the drive type on the My Computer page and when you try to bring up the drive it shows the message E:\ unaccessable "Incorrect Function".
 

Read other answers
RELEVANCY SCORE 37.2

ok i have a gateway 500 performance computer with a 500 mhz pentium 3.
My problem is when i try to burn a cd some songs make the process freeze. im using easy cd craetor. I have tried 3 different cd burners. 1 internal and 2 external. i have tried slower speeds and it still freezes i always thought it was an underrun but i came to find out its not. I found a way to avoid it but now its just to annoying. I always download the stuff i burn form kazza or other file sharing programs. so the song that would freeze it would be like a 128 quality so i would just download the same song but a 192 quality or a different one. and it would burn fine. i have a feeling it might be something with the computer itself. ive been dealing with this problem since i bought a cd burner for the computer. ive tried everything to deal with it pertaining to buffer underun methods but it doesnt work. I use to not mind my alternative but it takes a while becuase i have a slow cd burner and i have to test all the songs before i can acctually make the cd.
If anyone can help me in any way possible i really would appreciate it tank you.
 

A:complex problem with cd burning.

What OS are you running? Have you kept up with the updates?

Have you cleaned up startup items, so unneeded ones don't load? Run MSINFO32 to view them.

How is your drives configured? i.e. IDE 0 and IDE1 has...

When you power on the PC what drive modes are shown for each?

All these matter. Let us know so we can help.
 

Read other 2 answers
RELEVANCY SCORE 37.2

hey

i need heplp

anyone assist
 

A:Complex inquiry. Experts only. :)

I think you need to do your own homework.

In truth, they're actually pretty simple questions, if you've been paying attention in the course, I can't believe you can't answer them.
 

Read other 1 answers
RELEVANCY SCORE 37.2

In Access 2007, I've been building a gazillion reports which are variations on a theme. They are typical break reports with grouping by this field and sometime grouping on that field...sometimes there is detail data and sometimes only the summary lines are displayed.

I've used the same sub-report on virtually all these reports. It is a brain dead sub-report with only one column in a detail line with no headers, summaries, etc. I'm using this because the rolled up data has a many to one relationship with the data in the sub-report. Normally this works great: when there is more than one sub-report line the rest of the detail line is blank.

BUT! On this one report (of course it is the next to last report!), I get a relatively unhelpful error message:

"This expression is typed incorrectly, or is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables"

Of course, the bad expression is not shown to me so I'm left to hunt for the problem with no flashlight.

If I delete the sub-report, the main report runs okay.

How can I debug this to figure out where the problem is? Thanks.
 

A:Solved: expression is too complex

Sometime MS Access is too smart. It turns out that when I was switching to a new version of the report, rather than delete a field and re-add it, I just changed the control source in the property sheet. However, I did not change the name of the control itself. So I created a situation where the sub report was trying to connect to two report controls with the same name.

Debugging this should be easier, but I got it.
 

Read other 1 answers
RELEVANCY SCORE 37.2

Hi Everyone!
I am new to this forum, finally gave up and decided I need to ask for some help from some people with way more knowledge than I have.

Here is my dilemma.
I am not good at getting all the equipment to play nice together.

Here's the sequence, and how I assume is the best way to set this up.
I could be WAY off base so I made a diagram of the equipment and the ports.

Seimens Gigaset SE567 DSL modem
Juniper SSG-5
Trendnet POE switch into Juniper
Netgear into juniper
Axis PoE megapixel cameras into Trendnet PoE switch
Trendnet AP into juniper
Rackable server into Netgear router
Here is what I want to do.
And if I need another PoE switch let me know, I am kind of leaning that way.

I have a network of IP cameras that are PoE
The rackable server runs WinXP SP3 and the dvr/nvr software to record the cameras.
The trendnet AP will provide internet access to tenants in the building. It would be nice for them to be able to see the cameras real time but NOT have access to the server.
I want 2 networks, one for the tenants, and one internal for me, the server, and my personal NAS.

I want to be able to VPN into the server to monitor the property from another location.
I don't know if I need the netgear VPN if I have the Juniper, you don't need vpn equipment on both ends do you?
 

A:Need help with a complex network setup

What do I do about dhcp?
Do I want to do static ips?
Do I turn off dhcp for all devices but one? IE let the juniper dish out ip's?

Any help would be GREATLY appreciated.

On another note I did setup DynDns and have it working on the dsl modem, and I can log onto it from the internet, but I don't understand how to get through it to the juniper or the netgear router.
 

Read other 2 answers
RELEVANCY SCORE 37.2

Fairly Experienced Excel user but terrible with Databases (this may require a Database)

I have a Main Array with an index (sorted single word names, first column) and 6 additional data fields which may or may not contain data.

Sample
threesiks 8 T44 M6A2E1
tomcat0870 5 5
Trexdog 10 T30 M26
tungstun 8 IS3 ISU-152 Ferdi

I have 4 additional single column arrays which are not sorted but contain data in a preferred order (top down preference).

Array 1
T30
IS7
Maus
T34
IS4
Ausf B
T30
IS3
Lowe
M6A3E1
KV-5

Array 2
TD-704
JT-JagdTiger
Ferdi
ISU-152
M26

So, I have the name of a person say Trexdog. I need the result to look like

Name Array1_results Array2_results
Trexdog T30 M26

The T30 is pulled from array 1 as the most preferred piece of data.
the M26 is pulled from Array 2 as the most preferred piece of data (since the values above it are not present)

Total output from the above would be
threesiks M6A2E1
tomcat0870
Trexdog T30 M26
tungstun IS3 Ferdi

Note that Tungstun has 2 separate results in array2 but only the more preferred piece of data is displayed.
 

Read other answers
RELEVANCY SCORE 37.2

I need to create a macro which calculates the number of 5 day workweeks between 2 dates. The output for the calculation needs to be displayed in a specific format, think timeline, ie year on top row, month on second row, number of work weeks in bottom row below the month. Is this possible?

It would look something like this...excuse the shotty formatting and made up numbers:

Input in say...cells A1 and A2
start date 7/15/11 (user entered date)
finish date 2/4/12 (user entered date)

Output in rows C, D, & E

|........................2011.................|......2012......|
| Jul | Aug | Sep | Oct | Nov | Dec | Jan | Feb |
| 4.4 | 4.2 | 4.4 | 4.2 | 4.0 | 4.4 | 4.4 | 0.6 |

Is this possible?

Thanks in advance.
 

A:Help With Complex Date Calculation

Read other 16 answers
RELEVANCY SCORE 37.2

Greetings tech people. I have decided that before I perform a full system format and re-install, I would check here to see if other people might have some insight. I am including my system information and a detailed description of the problem. Also included is a list of everything that I have already tried.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Ultimate, Service Pack 2, 32 bit
Processor: AMD Sempron(tm) Processor LE-1250, x64 Family 15 Model 127 Stepping 2
Processor Count: 1
RAM: 1918 Mb
Graphics Card: ATI Radeon HD 4550, 512 Mb
Hard Drives: C: Total - 152617 MB, Free - 64943 MB;
Motherboard: Gateway, MCP61SM2MA
Antivirus: AVG Anti-Virus Free Edition 2012, Updated and Enabled
2nd Antivirus: Spybot Search and Destroy. Updated and Enabled

I have had this pc for quite some time now. Just recently I upgraded my ram from 2x 512mb sticks of ram to 2x 1gb sticks. This worked extremely well for about 2 weeks. Then one day windows vista decided to ignore my previous commands to deny automatic update installation and forced the install of an update. After it forced me to reboot my computer everything seemed fine(considering every other time this has happened I have had to format). About 2 hours went past and I heard a very loud POP come from inside my pc. (sounded like someone lit a firecracker in the case). Of course I knew this meant a popped capacitor. However after hours of tearing my pc apart I found no evidence of anything ... Read more

A:Complex series of issues

Read other 11 answers
RELEVANCY SCORE 37.2

I have attached a blank database with a form that is too complex for me to figure out, but you know, the boss wants it her way.

I think the best way to approach this is to tell you how the user will use the form then see what the code should be.

The user will select a PVendor # from the combo box which should then populate the MVendor # combo box below it. I would also like this to update a text box with the vendors name. The tricky part is getting the Pvendor combo box selection to MVendor box.

The rest of the boxes on the top half of the form function as they should with combo boxes pulling down from respected tables.

The bottom half of the form is also tricky. I need the top half of the form to add records to a Business Review table, and the bottom half of the form to add records to an "action item table". Each line in the bottom box should be a new record in the action item table. I don't know how to make a button that appends the top fields to a table and the bottom fields to a separate table.
 

A:Complex Access Form

Read other 16 answers
RELEVANCY SCORE 37.2

im planning a new pc for myself, this created this scenario, its like a puzzle:

i will be getting a new pc in my room, with windows 7
if i get that pc, my brother will get my old computer, but...
i want to put my old hdd in my new pc, together with a new hdd
and i want to put my brother's old hdd, in my old computer, so he keeps his files.

so in the end, i get my new pc with my old hdd, and a new win7
my brother gets my old pc with his old hdd and a new OS

how do i safely install windows 7 on my new pc, without my old winXP files getting in the way (that was still on my old hdd)?
(win7 can be installed on my new hdd too)

and how do i install a new OS on my old computer(that will go to my brother), without my brother's old OS getting in the way (that was still on his old hdd)?

i hope everyone can understand ^^
 

A:complex os migration/upgrading

Read other 8 answers
RELEVANCY SCORE 37.2

I am trying to report offensive content to Google by the website pogled3.goodadi.com
This site has combined multiple URLs (containing offensive content) together and embedded personal information such as REAL NAME. Therefore a simple search on a person's name brings up offensive content. Can someone on this forum help analyze / decode this link so that it can be reported to Google URL removal tool. Why are there multiple links? What do they mean?

Here's one example - note there are three http://
 

A:Need help understanding complex URLs

I've deleted the links as there is obviously some offensive content.

What's to analyze? If it does what you say, and goodadi.com seems to be a dubious site, why not just report it to Google?
 

Read other 1 answers
RELEVANCY SCORE 37.2

I want it to show one user on the login screen and have it so it logs into one of multiple users depending on the password I put in.(Windows 10 or kindle fire or android)
 

Read other answers
RELEVANCY SCORE 37.2

Hi there,

i have this ''complex'' problem, where i was hoping to get an answer for, and anyone who could help me with this would be my hero. I hope i made it as clear as possible.

Problem 1

So this is what is wrong, i have Windows XP PC, where the internet works fine. But, i often get this error 797 : Connection to modem failed, and then im asked to fill in a username and password. Also my telephone number is named there, but i don't know what to fill in for username/pass. Besides, we don't have a modem, we have a router which has 3 PC's connected to it, and my Xbox. Before, during and after the error my internet continues to work fine.

In addition, my PC works fine aswell, along with the internet connection. It isn't going slow at all, but that error message is bugging me. And i think another problem here is related to it.

Problem 2

Our router at home is located in a small room, where my Xbox is located aswell. Xbox Live works perfectly there. From the router, 3 cabels run to 3 PC's, up trough the wall on another floor and the other cable to a laptop on the same floor. There is also a small cable directly connected to my Xbox.

As you could imagine, the cable ends in the wall in the room where the PC's are, where we have to plug in another internet cable from that plug in the wall to the PC. ( just additional information, it might help )
All the internet connections in the other room's work fine aswell.

So to see ... Read more

A:Error 797 - Complex problem

I guess some mysteries will always remain unsolved
 

Read other 2 answers
RELEVANCY SCORE 37.2

Hi guys,
I know this is my first post but i really need help. I am one of those guys who try to move to linux but move back to windows.
I'hve been with windows since i first touched a computer(1998) and played Road Rash. Now i got a new computer with a pre-installed windows 8. I really didnt like the feel of it and am really quite angry on microsoft because it felt like the laptop which i spent my money on was taken away from me. Every thing needed admin rights and i could'nt install programmes because of the error
(please verify you have access to programfiles...)
So i thought of dual-booting windows 8 and ubuntu 12.04.
While ubuntu was installing i did not notice my charger was'nt in place.
So the ubuntu grub installation got corrupt. Windows 8 could boot but the windows system files got corrupt and the PArtition table and MBR got quite messed up.
SO i did a Low level Format for 18 hours of my 1TB HDD. Then i installed Ubuntu.
I am downloading a copy of windows 8 iso, and will install using my product key which i have under my laptop.
SO NO PIRACY.

Can anyone help me how to Dual boot windows 8 PRo and ubuntu 12.04?
I have ubuntu insatalled now and would love to install windows 8 as dual-boot.
Even if i install it in another NTFS partition, would'nt grub be placed with windows boot manager?
And what partition should i make for windows 8? Basicaly how should i dual boot install Windows 8 after installing ubuntu 12.04 wihtout any problems.

I dont mind windows boot ma... Read more

A:A quite Complex and wierd Problem

Hi stateoflinux,

Here are a few threads from within this forum that may provide you with the additional information you need:






Can anyone help me how to Dual boot windows 8 PRo and ubuntu 12.04?



Any One Duel Booting Ubuntu 12.10 With Windows 8?






I have ubuntu insatalled now and would love to install windows 8 as dual-boot



Installing windows 8 with Ubuntu 12.10 already in place

Good luck. Hope this helps.

Read other 2 answers