Over 1 million tech questions and answers.

Random BSoD, Driver Power State Failure, reports blame ntoskrnl.exe

Q: Random BSoD, Driver Power State Failure, reports blame ntoskrnl.exe

Hello and thanks for letting me post on this awesome forum!!!!

I am fixing a family members computer and it has stumped me. I have tried everything that I can find online related to my problem outside of reinstalling but I think it could be a hardware (power or memory) issue from what i read and a reinstall wouldnt fix it.

Driver_Power_State_Failure

I cannot trigger the BSoD of cue. Ive tried quite a bit, bringing it back from sleep, full load, no load, Skyrim, and different video cards.

I have been using Bluescreenviewer / myeventviewer to give me some incite but I couldn't find anything that would help my particular problem. So i present it to the people that know more then me, the online community. I followed the BSoD posting rules but let me know. Ill be checking back frequently.

Thanks again.

PS this computer is having raid issues. I get "Degraded NVIDIA mirror 931.51G" red flashing error for a couple seconds during boot. I dont know if this is related but BSoD's did not start at exactly the same time, but quite a bit of time after, I am told.

RELEVANCY SCORE 200
Preferred Solution: Random BSoD, Driver Power State Failure, reports blame ntoskrnl.exe

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Random BSoD, Driver Power State Failure, reports blame ntoskrnl.exe

A few issues

1-asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).


2-These were all related to your NVIDIA nForce RAID Driver. Yours is from 2006. Update to current of remove.

3-Old drivers

Code:
ASACPI.sys 3/27/2005 10:30:36 PM
nvrd64.sys 11/10/2006 4:18:39 PM
SiWinAcc.sys 6/14/2007 8:02:02 PM
SiRemFil.sys 6/20/2007 3:42:10 PM
SI3132.sys 10/3/2007 2:39:29 PM
dump_nvstor64.sys 1/25/2008 11:01:22 PM
nvstor64.sys 1/25/2008 11:01:22 PM
nvm62x64.sys 10/17/2008 5:01:06 PM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

Read other 3 answers
RELEVANCY SCORE 150.8

Win7 laptop running fine, suddenly 2 BSODs today, within an hour. First occurred while surfing (firefox), second occurred without any keyboard/mouse activity. No new hardware installed since new hard drive about a month ago. SF attached. TIA

A:Random BSODs, ntoskrnl, driver power state failure reports on minidump

Sorry for the late reply, Your dump files are not opening for me.
But you should remove some add ons to firefox, specially the adxloader.dll





Quote:
Event[10757]:
Log Name: Application
Source: SideBySide
Date: 2012-10-03T15:36:32.000
Event ID: 9
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: RWT-PC
Description:
Activation context generation failed for "C:\Users\RWT\AppData\Roaming\DocuSign\DocuSign Ink\adxloader.dll.Manifest".Error in manifest or policy file "C:\Users\RWT\AppData\Roaming\DocuSign\DocuSign Ink\adxloader.dll.Manifest" on line 2. The manifest file root element must be assembly.


It may be the cause of the crash while using firefox.

Just a question, when the keyboard and mouse was inactive and you got the crash, was the Cyberlink editing program in use? The event log says so, and actually that program failed there.

You should update the nvidia display driver, too.

Code:
Driver c:\windows\system32\drivers\nvlddmkm.sys (8.17.12.7527, 10.09 MB (10,583,656 bytes), 6/23/2011 6:38 PM)
Update your WiFi driver.

Code:
Driver c:\windows\system32\drivers\netw5s32.sys (13.1.1.1, 6.44 MB (6,755,840 bytes), 1/13/2010 3:36 PM)
Update ethernet controller driver.

Code:
Driver c:\windows\system32\drivers\yk62x86.sys (11.43.1.3, 310.28 KB (317,728 bytes), 5/26/2011 2:29 AM)
Free up the startup.
Click on the Start button
Type “msconf... Read more

Read other 3 answers
RELEVANCY SCORE 137.2

Hi

XPS L502x : 2nd generation Intel Core i7-2720QM processor 2.20 GHz with Turbo Boost
2.0 up to 3.30 GH
8Gb Ram
Windows 7 64 bit

Have been having repeated BSODs lately. Used to get them about once or twice a week but its now a few times a day that it happens.

Have attached the zip file made by the download from this site and will paste the WhoCrashed Report below.

I have tried numerous fixes and nothing has worked...getting desperate.

Thanks in advance guys


System Information (local)
--------------------------------------------------------------------------------

computer name: LAUCHLANMAC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 8499937280 total
VM: 2147352576, free: 1943908352



--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.


On Sun 3/4/2012 4:14:17 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\030412-14710-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800D8BC4F0, 0xFFFFF80000B9C3D8, 0xFFFFFA800BDDA010)
Error: DRIVER_POWER_STATE_FAILURE
file path: C... Read more

A:Random BSOD : ntoskrnl.exe (nt+0x7CC40) Driver Power State Failure

These were Related to Mbm3DevMt.sys F3607gw Mobile Broadband Device Management Driver from MCCI Corporation.

I would re-install the newest driver available.
The same is true for wwanussf.sys F3607gw Mobile Broadband Module from Ericsson AB

Why 2 Broadband drivers?

Read other 6 answers
RELEVANCY SCORE 121.6

Hey, my desktop computer keeps freezing here and there. I have a bad feeling it happens when working with my data HDD (not a system one). Some applications freeze and some not, I can restart, but it gets stuck when "Turning off" .. after few mins I get BSOD.

I've tried to boot up with driver Verifier and it freezes right after login screen .. no BSOD (within 30 mins).

The only thing I know from minidump is that it causes ntoskrnl.exe

Would someone help me to identify my problem?

Thanks in advance.

A:BSOD Driver Power State Failure ntoskrnl.exe

Welcome aboard.

Code:
fffff880`0355b488 fffff880`010bb041Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x3f041
sptd.sys is the most well known causes of a crash in windows 7. There are some technical reason behind it is that much crash prone. It is a paer of Daemon tools, so better you uninstall Daemon Tools.

Also free up the startup.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the results.

Read other 8 answers
RELEVANCY SCORE 121.6

Hello, my computer has crash 4 times within the past two hours. I believe it has something to do with the Elgato Game Capture HD software I installed on the computer, since it seemed to only happen when I was either using it, or trying to uninstall it. Currently, I've uninstalled it, and no BSOD so far. I have updated my drivers and performed any windows updates available. Please help.

Thanks in advance.

Read other answers
RELEVANCY SCORE 121.6

I'm getting (seemingly) random BSOD's, and according to bluescreenview it's caused by ntoskrnl.exe. Not really sure how to fix this, and what it means.

It's a relatively fresh install of windows, built PC

AMD phenom II X4
ECS a750GM-M V7.0 motherboard
G Skill memory (4 GB)
Windows 7 Pro x64
if any of that is relevant.
All windows updates are installed
All drivers are up to date

It says I'm not permitted to upload the .dmp files, so I'll post them on Mediafire, unless there's a way I can view them myself and post them.

Mediafire link to all four dump files: http://www.mediafire.com/?psykx435dqvuabq,8m3hdbhxsquktsg,mth615eme064b6k,m6n5nd3144355os

A:BSOD, driver power state failure, ntoskrnl.exe

Hi -This is a way to see the BSOD records and post them here -Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next replyThank You -

Read other 13 answers
RELEVANCY SCORE 121.6

Hello guys,
I tried resolving this issue by myself, but I can't figure it out. I'm getting BSOD on my new laptop. The laptop is brand new, I bought it about one month ago. It came with the default linux OS installed by the manufacturer, but I did a format and I installed Windows 7 Ultimate x64.
Machine specs:
Acer Aspire V3-771G 736b4G75Maii
CPU: Intel Core i7-3630QM 2.4GHz with Turbo Boost up to 3.4GHz
GPU: nVidia GeForce GT 640M 2GB DDR3 memory
RAM: 1x 4GB DDR3
HDD: 750 GB Toshiba

I got BSOD 3 times, every time I was browsing the internet using Mozilla Firefox. First couple of times I was on facebook checking some pictures and the 3rd time I was on forums looking for a solution to this problem. The BSOD happened when the laptop was on high performance settings, but i can't remember if it was plugged in or not.

As i said, the laptop is 1 month old, but it came with a broken speaker so it was sent to the service where they replaced the entire front cover. They said the reason is that the speakers are glued to the front cover so it was not possible to replace only the speakers. Before sending the laptop to the Acer service I did not experienced any BSOD and I used it for like 2-3 weeks, I even did some gaming on it.
The first BSOD occurred last week and the laptop wasn't used until yesterday when it happened again and the last BSOD happened just earlier today.

I will attach the prefmon.html and the folder with the files I got from the BSOD_Windows7_Vista_v2.64_jcgriff2_.ex... Read more

A:BSOD ntoskrnl.exe driver power state failure

I forgot to mention, from the last BSOD in event viewer i have the following events:
Event 6008
The previous system shutdown at 3:44:38 PM on ‎8/‎19/‎2013 was unexpected.

Event 1001
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8005294a10, 0xfffff80000b9c3d8, 0xfffffa8004b9a570). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 081913-17596-01.

Event 41
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Event 1101
Audit events have been dropped by the transport. 0

Event 10002
WLAN Extensibility Module has stopped.

Module Path: C:\Windows\system32\athihvs.dll
Event 4001
WLAN AutoConfig service has successfully stopped.
Event 37
The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 41 seconds since the last report.

this last event shows up 8 times, one for each core. The CPU has 4 physical cores, but with hyperthreading it has a total of 8.

I did a Driver Verifier according to the instructions posted here (http://www.techsupportforum.com/foru...ed-473665.html) and there was no BSOD.

Read other 16 answers
RELEVANCY SCORE 120.4

I've been experiencing this BSOD on and off for a while now, and after doing some research came across a forum post suggesting to do a memtest. I've only had time to run it for 3 passes and will try for the full 8 later in the week when I have more time.

I thought I would start a thread to make sure there are no other underlying issues that could be the cause of the BSOD. Attached are the SF Files. Thanks!

A:BSOD Driver Power State Failure 0x0000009f (ntoskrnl.exe)

Hi MSB117.

The dedicated GPU is totally out!!! Does a restart brings it back?

Yes, a stop 0x9F can do it, based on sleep/hibernation settings and it is often seen for Optimus Technology/Switchable graphics. It is not the first instance.

As the GPU is causing continuous issue over a time, I would suggest you to contract Dell/Alienware servicing center.

Read other 7 answers
RELEVANCY SCORE 120.4

Hello,

I've had 3 BSOD in the last few days, usually when my computer is asleep or when I am not actively using it. Malwarebytes anti-malware software indicates no issues, as does esot nod antivirus5.

Ran a free program (BlueScreenView v1.47 by nirsoft) which indicated a driver power state failure and/or a ntoskrnl.exe problem.

I do not know how to proceed, and would love some advice!

A:BSOD - driver power state failure or ntoskrnl.exe problem?

All of your crashes are caused by your Texas instruments USB 3.0 driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80140bfcd0, fffff80000b9c3d8, fffffa8011a2aac0}

*** WARNING: Unable to verify timestamp for tihub3.sys
*** ERROR: Module load completed but symbols could not be loaded for tihub3.sys
Probably caused by : tihub3.sys

Followup: MachineOwner
---------
Driver Reference Table - tihub3.sys
Looking at the driver we can see it is rather old:

Code:
kd> lmvm tihub3
start end module name
fffff880`053d7000 fffff880`053fb000 tihub3 T (no symbols)
Loaded symbol image file: tihub3.sys
Image path: \SystemRoot\system32\DRIVERS\tihub3.sys
Image name: tihub3.sys
Timestamp: Wed Nov 23 00:50:16 2011 (4ECC8998)
CheckSum: 00021577
ImageSize: 00024000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update your driver from here: Analog, Embedded Processing, Semiconductor Company, Texas Instruments - TI.com

Read other 5 answers
RELEVANCY SCORE 120.4

Hello,

I've been having bsod's for a while ever since I disabled the Automatic Restart. I'm going to say that I figure it might have something to do with my Toshiba external hdd but I hope I can get a fix for this. I've spent days researching online - I've tried to find if I had any drivers to update by going to my Device Manager but all "update driver" results I get are the same: they are up to date.

My zipped minidump files: http://sdrv.ms/YPs4lS
Win7 Home Premium x64
Dell Inspiron 580S
Intel Pentium G6950 2.80GHz
4GB of RAM
Service Pack 1

Most recent crash info:On Sun 2/24/2013 1:44:16 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022313-16130-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA80059EB060, 0xFFFFF80000B9C518, 0xFFFFFA80074604B0)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
Any help is greatly appreciated!

A:BSOD: Driver Power State Failure ntoskrnl.exe 0x9F

Hi and welcome to the forums.

Seems like a core Kernel level issue.

Things to do:

Run System File Checker to verify/repair the integrity of system files.
Full tutorial here: SFC /SCANNOW Command - System File Checker

Uninstall COMODO Internet Security and replace it with Microsoft Security Essentials - Microsoft Windows
Update it and run a full scan.

Go to Start>Run
Type MSCONFIG and press Enter.
Click on Startup tab, now click on Disable All.
Click Apply and OK. Reboot the system.

In addition, run chkdsk /f to repair corrupt hard drive sectors.
Full tutorial here: Disk Check

If all of the above fails, as a test, I'd suggest you to Enable Driver Verifier to find out which driver/software is causing the BSOD. Once you enable it, expect some frequent BSODs. After 24 hrs, disable the Driver Verifier and re-upload the dump files for analysis.

Let us know if it works.

The below is for information purpose only:

BugCheck Analysis:


Code:
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.

MODULE_NAME: nt

FAULTING_MODULE: fffff80002e56000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 503f82be

DRVPOWERSTATE_SUBCODE: 3

DEVICE_OBJECT: fffffa8005bca060

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002f3f6d2 to fffff80002ed4fc0

STACK_TEXT:
fffff800`00b9c4c8 fffff800... Read more

Read other 5 answers
RELEVANCY SCORE 120.4

Hi!

I recently got a laptop from Scan.co.uk, it's a custom build using the Clevo kit.
I have been having intermittent BSOD's with a Driver Power State Failure message at random times, I can't see a discernible pattern.

It can happen whether on the desktop, chrome or gaming but generally on the desktop during minimal use.
I can play games for around 8 hours without issue but sometimes I'll get the error straight after booting up or whilst shutting down or just doing work in chrome.

I've seen people with similar issues in this forum and have tried to make sure all my drivers are up to date but I'm missing something somewhere

Any help offered would be greatly appreciated

Steps I've taken so far;

Avast Virus scan - No threatsEset online scan - No threatsAll windows Updates AppliedDism run
"Dism /Online /Cleanup-Image /ScanHealth" - The component store is repairable. The operation completed successfully."Dism /Online /Cleanup-Image /CheckHealth" - The component store is repairable. The operation completed successfully."Dism /Online /Cleanup-Image /RestoreHealth" - The restore operation completed successfully. The component store corruption was repaired. The operation completed successfully.

A:BSOD Driver Power State Failure ntoskrnl.exe+153ca0

Hi ApocalypseMeow & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe0011851f010
Irp is active with 6 stacks 4 is current (= 0xffffe0011851f1b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001143e9880 00000000 fffff801f3aa2fc4-ffffd0002a3468f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe00117f61040 00000000 fffff800b4395fd8-ffffe0011a826f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
\Driver\nvlddmkm nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe0011a826f08
Args: 00000000 00000000 00000000 00000000


As we can see that the "nvlddmkm.sys" which is the... Read more

Read other 7 answers
RELEVANCY SCORE 120.4

Been having the occasional blue screen every few hours for the past week or two now, I've been trying to pinpoint exactly which drivers are causing the issue or if it's something more serious. It's a custom built machine and around 18 months old now, so it's not completely unlikely that some of my parts are starting to wear out. (Not overclocking)

Also, I had a hal.dll error associated with the Driver Power State Failure as well, it just didn't fit in the title.

If anyone can give me a hand with this it'd be much appreciated. I've attached the SF files as requested.

A:BSOD Driver Power State Failure ntoskrnl.exe, ntkrnlmp.exe

I"m sorry that I missed this post.
Please reply back if you still need help. I'll reply after work today (after 3pm Eastern time in the US).

Read other 1 answers
RELEVANCY SCORE 120.4

Hello,

This morning when i woke up when i switched my pc's monitor i got those beloved letters.My computer was on idle,probably it fell asleep.The settings on power options were on Balanced mode.Pc is on stock clocks.No overclock made.
Heres the minidump file.
Notice: this happened a couple of days once i updated lots of windows updates.

A:BSOD - Driver power state failure - ntoskrnl.exe+75bc0

Welcome to the Forum.

AVG is contributing to your BSOD. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

Rt64win7.sys Thu Feb 26 15:04:13 2009 (49A65B0D)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Com... Read more

Read other 1 answers
RELEVANCY SCORE 119.2

Hello All,

I believe the problem is the result of ntoskrnl.exe because WhoCrashed crash dump analysis says...

This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A35EA10, 0xFFFFF80000B9C518, 0xFFFFFA8010D8CCA0)
Error: DRIVER_POWER_STATE_FAILURE

although occasionally it is....

This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A35EA10, 0xFFFFF80000B9C518, 0xFFFFFA8010D8CCA0)
Error: DRIVER_POWER_STATE_FAILURE


? Win 7 Pro
? x64
? The original OS installed on the system was Win 7 Home
? The OS is a full retail version that I installed
? 5 year old Board and chip
? I have re-installed the OS (always a clean install from a wiped drive) several times. Current install is a little over 1 year old.

? Intel Core i7 860 @ 2.8GHz
? NVidia GeForece GTX 650 Ti Boost
? Dell Studio XPS 8100 Motherboard w/ Intel H57 Chipset
? Diablotek Pro Series 550w Power Supply

? Dell
? Studio XPS 8100

Desktop

I have expanded and replaced a number parts on the system since originally purchased. I currently have 3 SATA Drives and the DVD drive attached to the motherboard as well as an external drive attached to the external eSata port. 12GB RAM. My OS resides on its own SSD and all files are stored on other drives. I am not overclocking. The only security I am running is MS security essentials.

Let me know if there is any additiona... Read more

A:BSOD Regularly WhoCrashed says ntoskrnl.exe Driver Power State Failure

Hi

Can you update the driver to your Broadcom NetLink (TM) Gigabit Ethernet from Broadcom?
Let us know the result.

Read other 3 answers
RELEVANCY SCORE 115.2

Hello,

I'm getting random driver power state failure (9f) BSODs without any discernible trigger event as far as application. I used the sevenforum tool to collect the information. You guys have been very helpful in the past and hopefully can help with this issue too.

Thanks.

A:Random 9F Driver Power State Failure BSOD

Hello dpm5049.

You need to update your realtek driver, as advised here, too.

Code:
fffff880`06247000 fffff880`062cc000 Rt64win7 (deferred)
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Fri Jun 10 12:03:15 2011 (4DF1BAAB)
CheckSum: 0008B67F
ImageSize: 00085000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
All the recent dumps I have checked are identically same, and vague.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800513e050, fffff80001c5a518, fffffa80040cda50}

Probably caused by : sbp2port.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
********************************************... Read more

Read other 1 answers
RELEVANCY SCORE 115.2

Hi guys, just started getting this BSOD over the last two days...

Any help is appreciated

- Running Win 7 X86
- OEM version of Win 7 running on a custom machine
- Been running this configuration for 2 years no issues
- Hardware is about 2 years old

A:BSOD 9f - DRIVER POWER STATE FAILURE, seems to be random

Your crash reports indicate a possible problem with your Windows installation. Please follow the Windows Genuine and Activation Issue Posting Instructions. Post the results in your next post; do not start a new thread.







  
Quote: Originally Posted by Brink


NOTE: The MGADIAG report does not contain any sensitive or personal information, and is best posted un-edited for us to be able to help.

7. Select (highlight) all of the MGADiag report that you just pasted, and click on the code box # toolbar icon to wrap the report in a code box when posted. (see screenshot below)

Attachment 219589

Read other 9 answers
RELEVANCY SCORE 115.2

Thanks for the help in advance, new to the forum. I recently reinstalled win 7 32bit when I put a new hard drive in pc. Its a 5 year old Hp Pentium 4 2.8ghz with 2.5 gig ram. Runs great, this is the only problem that I have: Once or twice a day I get the BSOD that says it has a Driver Power State Failure. I thought I had updated all drivers during reinstall, but I must be missing something?? I cannot read these dump files, but I have attached the latest. Any help would be awesome:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 00000003
BCP2: 85C8D690
BCP3: 80D8ADB0
BCP4: 87DAAB28
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

A:Random BSOD Driver Power State Failure

Hello,

It seems your Conexant TV Tuner drivers are the cause here. Try updating the drivers, see if that helps. If you can't find an update, remove the device.
Code:
cx88vid.sys Tue Oct 14 14:44:16 2003 (3F8C4400)

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\JK\AppData\Local\Temp\Temp1_042811-24203-01.zip\042811-24203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`80d8ada4?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0x82c02000 PsLoadedModuleList = 0x82d41570
Debug session time: Thu Apr 28 14:21:03.093 2011 (GMT-4)
System Uptime: 0 days 2:20:02.218
Loading Kernel Symbols
...............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
.........
0: kd> !analyze -v
*******************************************************************************
* *
* ... Read more

Read other 2 answers
RELEVANCY SCORE 115.2

Ever since I got my Dell Inspiron 15r a few months ago I've been getting random blue screens of death, about every 1-2 weeks.
I've tried using Google to find a solution but I can't seem to find the right one for my situation, so I came here.
They do NOT happen when I boot up the computer. Usually it's when I close the display, I'll leave it on and later find it with the blue screen.
I got BlueScreenView so I have a few details available.
It's always "DRIVER_POWER_STATE_FAILURE" and caused by ntoskrnl.exe+8207a
But I don't really have any idea what that means. Please help?

A:Random BSOD's "driver power state failure"

Let's collect some more information: I'll have a look at it and help you try to resolve the problem. Please follow the instructions: BSOD Posting Instructions: Windows 7 - Vista(Note: When you run BSOD_Windows7_Vista_v2.64_jcgriff2_.exe, it will also run autoruns.exe ... and both need to be in the same location!)... with one exception in the following line:"4. Zip up the entire output folder + PERFMON and attach the zip file to your next post."The BC forums will allow a total attachment size of only 512 kb (and what you need to attach will exceed this limit). Please upload the zip file to a file sharing website of your choice and and post a link to it in this thread so that we can access your uploaded zip file. I will have a look at the contained information and see if I can shed some light on your BSOD issue.See the suggestions in the following links for recommendations on file sharing websites:http://lifehacker.com/388284/best-online-file-sharing-serviceshttp://www.hongkiat.com/blog/15-great-free-online-file-sharing-alternatives/http://www.smashingapps.com/2008/08/28/5-best-free-file-hosting-services-to-store-your-files.html Please Publish a Snapshot using Speccy, and post a link to it in this thread.It is a convenient and accurate way of providing us with details of your computer specifications. Please download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:
List Installed ProgramsClick Go.
When the scan is finis... Read more

Read other 2 answers
RELEVANCY SCORE 115.2

A week ago I experience a BSOD stating Driver Power State Failure in any moment. Don?t matters if I am using a design program or a web explorer. Can anyone help? I have attached the Minidump as a .rar file.

Thanks

OS: Windows 7 x64

A:Random BSOD - Driver Power State Failure

nobody?

Read other 1 answers
RELEVANCY SCORE 115.2

I've got randomly occouring BSODs on my Dell XPS 9000. The BSOD is always a driver power state failure. Log files attached.

My system is ~3 years old. Running a 2 year old Win 7 Ultimate x64 image.

Please help.

Thanks!

A:BSOD - random - always Driver Power State Failure

Might have something to do with the fact that your uptime (time since last reboot) was almost 6 days.

The slightest memory leak, etc will magnify over that time.

Read other 9 answers
RELEVANCY SCORE 115.2

Hey guys I am new here and need some help with my random BSOD. I think it only happens when I wake the system from sleep mode. It does it while in the middle of a game or if I an just cruising the net. I haven't notice it after a fresh boot, but like I said mainly after I wake it from sleep mode. Any help is appreciated.

How do I get the mini.dmp file to zip? It keep telling me I don't have permission, yet I am the only user for the PC?

A:Random Driver Power State Failure BSOD

  
Quote: Originally Posted by Midnightorion


Hey guys I am new here and need some help with my random BSOD. I think it only happens when I wake the system from sleep mode. It does it while in the middle of a game or if I an just cruising the net. I haven't notice it after a fresh boot, but like I said mainly after I wake it from sleep mode. Any help is appreciated.

How do I get the mini.dmp file to zip? It keep telling me I don't have permission, yet I am the only user for the PC?



This crash was probably caused by atapi.sys. It is an ata driver for things like your CD player. I would run a system file check to verify and repair it. To do that type
cmd in search>right click and run as admin>sfc /scannow.

Let us know the results
Ken


Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Wed Jun 23 12:54:26.157 2010 (GMT-4)
System Uptime: 0 days 9:34:49.812
BugCheck 9F, {3, fffffa80046a7060, fffff80003e21518, fffffa8004095c60}
Probably caused by : atapi.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System

Read other 2 answers
RELEVANCY SCORE 115.2

Hello,

A few minutes after logon, applications become non responsive. Then the screen will totally freeze, meaning a hard restart is the only option. Occasionally, I also get a driver power state failure BSOD instead of the screen freezing up (not sure what this means). Laptop runs fine in safe mode and have been attempting to determine which service/application/hardware is causing the problem using msconfig, but to no avail. Please help!

A:Random BSOD - Driver Power State Failure

Welcome to Seven Forums .

Several critical files are missing from the zip you uploaded, please rerun the SFDT until it completes
generating & collecting all the files.
MSINFO32 is empty due to the WMI service not being active.
Please confirm you have these services running and active:
Security Center, IP Helper, Windows Management Instrumentation.
> Services.msc > hit enter.
Attachment 286395

From I could gather with what was uploaded, several courses of action is needed for now:


Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800af9e060, Physical Device Object of the stack
Arg3: fffff80004c2e748, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8005b37010, The blocked IRP

Code:
>[ 16, 2] 0 e1 fffffa800af9e060 00000000 00000000-00000000 pending
\Driver\usbhub
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 fffffa80098a2e10 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\iBtFltCoex.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iBtFltCoex.sys
*** ERROR: Module load completed but symbols could not be loaded for iBtFltCoex.sys
\Driver\ibtfltcoex
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffff... Read more

Read other 3 answers
RELEVANCY SCORE 115.2

The BSODs are random but seemed to be happening more often and don't happen while I'm working on laptop but when I step away for awhile. I thought it might be while something plugged in to laptop like phone or tablet via usb but when it happened earlier today nothing was plugged in. It never happens while just running laptop off battery but I rarely do run off just battery if any of that matters. Also when it happened today and maybe on past days too...I would notice laptop sounded like the insides were racing.

I found this site through another site that recommended using SF Diagnostics Tool to collect data which I did. Now I see the DM Log Collector tool referenced in your instructions. Not sure which to use. Let me know if the latter is the correct one and I will redo my upload.

Thank you for any help or advice you can provide. Appreciate it.

A:Random BSOD with Driver Power State Failure

Please use the DM Log Collector & check HP for BIOS updates.

Read other 6 answers
RELEVANCY SCORE 114

I am getting BSO with DRiver Power State Failure, and there is no consistent trigger that is doing this.

I am an audio engineer, and I rely on my machine to work, so that I can pay my bills. The last 2 months have been a headache, as I have not been able to reliably do any type of work. I am looking at building a new machine, but until then, I need something a little more reliable.

The BSOD happened about 15 minutes ago, and I had copied the dump log, but when I was registering, I got another BSOD, erasing the Dump log. I expected to find another dump log when I signed in, but there was none there.

I am looking to have this issue solved, if anyone is up to the challenge.

I realize the info provided is bare, but perhaps someone could guide me as to what type of info you need to see what is going on.

I'm an audio engineer, Luthier, and hobby electrical "engineer", not a programmer, so any help would be appreciated.

I would also be willing to provide some audio work as a form of payment, to show my gratitude.

Thanks to all who give attention to this matter.

Regards,

A:Driver Power State Failure BSOD, Consistently, but random.

It just happened again,

Here is what I got ...

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80075A4060
BCP3: FFFFF80000B9A518
BCP4: FFFFFA8008B1C7F0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\103014-19687-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-56675-0.sysdata.xml

---------------------------------------------------------------------------------------------------

Happened again as I turned on my machine, went to make coffee, came back, and after clicking on my browser button (non responsive) the BSOD came back up. I copied the info to see if there were any differences, and there were.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80076B6060
BCP3: FFFFF80004DDC518
BCP4: FFFFFA80095BE010
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\103114-19734-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-61635-0.sysdata.xml

----------------------------------------------------------------------------------------------------

Here is another BSOD blue scr... Read more

Read other 1 answers
RELEVANCY SCORE 114

Dell Studio T6500
Vista x64 sp1
original OS, re-installed few days prior
OEM
Hardware 1 Year
Re-installed (updated from disk) few days ago and started having problem
intel core 2 duo
i think the video card is Mobile Intel 4 Series Express Chipset Family (?)
not sure about the motherboard
Dell power supply,

Getting random crashes, sometimes a few mins apart, sometimes hours, with BSOD reading Driver Power State Failure. At first I had a problem with explorer not loading on startup. Had to run programs through task manager. then updated windows from the original CD, restoring the files and bringing back explorer. It was then that it started crashing. any help would be greatly appreciated.

A:Crashing at random, BSOD Driver Power State Failure

Hi,

All Driver Power State Failure errors.

They all blame the disk controller, and a driver usually seen in Firewire/USB BSODs.

Therefore your external drives (or more likely programs that access them) are at fault.

Number one on the list are the Norton remnants that are still being loaded on the system (probably from the "free trial" that comes preloaded on most OEM systems).

Remove these remnants of Norton:

Quote:




Download the Norton Removal Tool (NRT); save to desktop. Boot into SAFEMODE - NO Networking. Tap F8 key during boot-up. Then go to desktop, RIGHT-click on the NRT icon and select Run as Administrator.

When complete - re-boot.

NRT - ftp://ftp.symantec.com/public/englis...moval_Tool.exe




If that fails to stop the BSODs then get rid of AVG too

Quote:




Download the AVG Removal Tool (ART) from here (make sure you get the appropriate version) -> save to desktop.

Boot into SAFEMODE - NO Networking. Then follow instructions to remove.

When complete - re-boot.

Install MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Then reset the Windows Firewall to its default settings -
START -> type cmd.exe -> right-click -> run as administrator -> type netsh advfirewall reset press enter




While you are at it you really should update to SP2 as it contains many crucial security
updates that you don't have otherwise ... Read more

Read other 1 answers
RELEVANCY SCORE 114

Somewhat recently i moved my laptop from school to home and suddenly the laptop went from perfect *or close enough* working conditions to having a multitude of problems from being unable to boot for a while, randomly restarting as if someone just pulled the plug, and this particular BSOD that seems to occur randomly seemingly unrelated to whether or not i'm doing anything. I haven't figured out the cause of the first two problems although the inability to boot went away at random, i'm considering the possibility that this BSOD and the other two issues are possibly related.

A:Random driver power state failure 0x0000009f bsod.

bump

Read other 1 answers
RELEVANCY SCORE 114

Who crashed tells me this:

From Memory.DMP:
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A332060, 0xFFFFF80000B9C518, 0xFFFFFA800E69CCC0)
Error: DRIVER_POWER_STATE_FAILURE

From Mini Dump
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC80)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A332060, 0xFFFFF80000B9C518, 0xFFFFFA800E69CCC0)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe


Can you guys help me narrow it down from my dump files what could be causing this? A lot of times I just come back to the computer and see that it recovered from a serious error. Other times Ive just been doing nothing more than web browser.

I used driver genius to keep all my drivers up to date. Thanks for the help.

A:[SOLVED] Random BSOD - Driver Power State Failure

Hi -

Update Marvell Yukon Ethernet driver -

Code:
yk62x64.sys Thu Sep 08 03:34:54 2011 (4E68701E)
http://sysnative.com/drivers/driver.php?id=yk62x64.sys


You are overclocked -

Code:
Expected Frequency: 3070
Actual Frequency: 3800
Overclock Ratio: 1.23
O/C may be contributing to BSODs.

Regards. . .

jcgriff2

`


Code:

Opened log file 'C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\050412-7222-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?00000000`00000000?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`021cfc32?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`0023cc32?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*a:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17790.amd64fre.win7sp1_gdr.120305-1505
Machine Name:
Kernel base = 0xfffff800`03009000 PsLoadedModuleList = 0xfffff800`0324d650
Debug session time: Fri May 4 02:01:17.215 2012 (UTC - 4:00) ... Read more

Read other 2 answers
RELEVANCY SCORE 114

Hello,

I have been having a BSOD issue for a couple months now. Occasionaly, I will be either having the computer remain idle or be working on it for some time. After a while, my computer begins to lock up and shortly after, a BSOD occurs with the error DRIVER_STATE_POWER_FAILURE. Any help would be greatly appreciated.

Thank you very much.

A:BSOD Driver State Power Failure at Random Occurences

Hi,

I have a similar problem (DRIVER_STATE_POWER_FAILURE).
I attach my log without opening a new post. Please just look at 2015's crashes.

I hope in your support! It is becoming very destructive for my work.

Thanks in advance.
Gian.

Read other 1 answers
RELEVANCY SCORE 112.8

I've been getting these BSOD's very occasionally over the past few months. Computer can always do full reboot in normal boot mode without problems. I don't think it has ever happened more than once in a day and I typically have gone a couple of weeks between crashes. They typically happen without me being at the computer, although once or twice have occurred when I was on the keyboard. Don't know what else to put, but would appreciate any help.

A:BSOD Driver Power State Failure pretty random and sporadic

Hiya and welcome to SevenForums!

Code:
BugCheck 9F, {3, fffffa8010c39a00, fffff80000b9a3d8, fffffa800d2c7600}

*** WARNING: Unable to verify timestamp for LEqdUsb.Sys
*** ERROR: Module load completed but symbols could not be loaded for LEqdUsb.Sys
Probably caused by : LEqdUsb.Sys

Followup: MachineOwner

Code:
LEqdUsb Logitech SetPoint Unif Logitech SetPoint Unif Kernel Manual Running OK TRUE FALSE 28,672 32,768 0 5/23/2013 1:09:50 AM C:\Windows\system32\DRIVERS\LEqdUsb.Sys 4,096
This is your Logitech SetPoint Unifying KMDF USB Filer Driver. It hasen't been updated since 5/23/2013. Update it.

Read other 1 answers
RELEVANCY SCORE 112.8

Can't seem to shake this Driver Power State Failure BSOD. Happens almost daily.
I am currently running ArcGIS which is a huge pig on resources but the BSOD is not exclusively occurring when I run it.
Thanks in advance for the help/insight.

Read other answers
RELEVANCY SCORE 112.8

Random system restarts/BSOD. Sometimes it happens while the computer is in sleep mode, sometimes it's while I'm actively using it, sometimes I'll just be reading something on the screen and the system is suddenly restarting. This has been happening for years now but has recently gotten worse.

A:BSOD at random times. Recently driver power state failure

Hi,

Try running the Hardware Diagnostics on your computer. If you get any error code, make a note of the error code.

Did you try doing System Restore? If no and if this issue started occurring after doing some recent software changes on your computer, then I would suggest try restoring your system back to a date when it was working fine. System Restore will affect Windows system files, programs, and registry settings only.

For System Restore steps, you can refer to the URL mentioned: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

Read other 9 answers
RELEVANCY SCORE 109.6

I'm getting a BSOD pretty much every time I shutdown the PC. Has only just started happening in the last couple of weeks.

DRIVER_POWER_STATE_FAILURE
caused by driver: ntoskrnl.exe

I've attached the SFDiagnostic here - thanks.

A:BSOD - ntoskrnl.exe "driver power state failure" at shutdown

Hi thedriver.

The BSODs are caused by REALTEK 2832U USB Driver (c:\windows\system32\drivers\rtl2832uusb.sys)





Quote:
Windows Error Reporting: Fault bucket X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys, type 0
Event Name: BlueScreen
Response: Not available
..........;Analysis symbol: X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys
............



Code:
BugCheck 9F, {3, fffffa8008604060, fffff80001f4a518, fffffa800ae4e710}

*** WARNING: Unable to verify timestamp for RTL2832UUSB.sys
*** ERROR: Module load completed but symbols could not be loaded for RTL2832UUSB.sys
Probably caused by : RTL2832UUSB.sys

Followup: MachineOwner
---------
And the driver is old enough.

Code:
fffff880`07778000 fffff880`07785000 RTL2832UUSB T (no symbols)
Loaded symbol image file: RTL2832UUSB.sys
Image path: RTL2832UUSB.sys
Image name: RTL2832UUSB.sys
Timestamp: Wed May 04 14:05:12 2011 (4DC10FC0)
CheckSum: 0000ACF2
ImageSize: 0000D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Some information about what this driver does: Realtek
Unfortunately I am unable to search an appropriate update for you. I hope you know the sources to get it, as you are using it.

If you can, update the driver. Otherwise, dont use it.

Read other 3 answers
RELEVANCY SCORE 109.6

Hi Folks,

I really hope you can help me, I followed the instructions to create the attachement.

What I know so far is that this machine has BSOD'd several times...The last 2 times a ultilty called BlueScreenViewer.exe says it's due to "Driver power state failure" caused by: ntoskrnl.exe

I checked event viewer for the time mentioned 6/17/2012 11:29:02 pm and it says there is system error "source:Bug Check" at that exact time

For anti-virus I have MS Security Essentials. For Spyware, I have Spybot S&D.
I use with Workstation 7 as a study too so it has hosed my VMs which is very disappointing. I would really like to root cause this to continue with confidence...

I know you hear this all the time...but... please help! I don't mind collecting info and checking into things, I am just out of my element a little here.

I looked throug the results of the permon report and it seems clean for the most part.

Thanks in advance,

Jay

A:BSOD "Driver power state failure" caused by: ntoskrnl.exe

Is there anything else I can do to help action this post? Thanks

Read other 9 answers
RELEVANCY SCORE 109.2

I apologize in advance if this is a duplicate thread to a problem already solved previously.

Two months ago, I purchased this laptop (Alienware M17x R3) and was met with strange problems some time after owning it. An error code for memory failure, refusal to boot, BSOD with the error of DRIVER_IRQL_NOT_LESS_OR_EQUAL and SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Not sure what to do, I didn't do much of anything, except check my RAM chips for contact damage, and a swapping of positions was performed. So far, those particular error messages have not happened again, except for a DRIVER_POWER_STATE_FAILURE. These happen seemingly at random, but occur more frequently when the computer is under graphics stress, such as in a Starcraft 2 match.

I have, per the posting suggestions, attached relevant files.

Thanks.

A:Driver Power State Failure, ntoskrnl.exe?

Welcome to SevenForums.

Here's an output of your recent BSOD dump file:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800e3c6a10, fffff80000b9c3d8, fffffa800ed0fe10}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 000000000000... Read more

Read other 9 answers
RELEVANCY SCORE 109.2

I have a 13 days old win7 pro RTM x64 system. In the past two days I had
two BSODs of similar fashion:

The machine was running for several hours at that point, and suddenly the
blue screen pops up. I wasn't really pushing the system, just browsing.

The crash dump is like this in both cases:






Quote:
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0x9F (0x3, 0xFFFFFA8003B4B050, 0xFFFFF80000B9C518, 0xFFFFFA80052E0E10)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Likely the culprit is another
driver on your system which cannot be identified.



I'd appreciate any help.

A:ntoskrnl Driver power state failure

I had the same problem
I tried everything nothing worked
I saved everything in safe mode and did a re-install

But do some searching on Google
one thing I didnt try was replacing ntoskrnl.exe with one downloaded from the net
I will search for mine & post it here for you here

Also do some searching on here

Read other 9 answers
RELEVANCY SCORE 108

Hi all,

I was hoping to bring the 'big guns' on this forum to bear on my problem. My friend has an Asus UX32A notebook with Windows 8. To provide some back story (the meat of the problem is after this paragraph if you want to skip)...

It is brand new with hardly anything installed on it besides Norton 2013 and Office. It would freeze about 60 seconds after start up, for a good long while, and it seemed to get worse over time. I have done a LOT of things to it in the last two days - uninstalled Asus bloatware (which was also causing a black screen on startup problem), updated just about every driver and BIOS, disabled fast start up, disabled 'dynamictic' via cmd prompt, disabled all non-Windows services and then progressively enabled them to try to isolate a rogue one. I THINK I might have fixed it (in the end I left 7 services disabled - two Intel Management, Intel Dynamic application, Intel ME service, as well as Wireless PAN, Skype updater and Sony PC companion. I have no idea if it's one of these but the system seems not to freeze now and I have reached the end of my patience anyway). It might seem like too much but it was very difficult because e.g. to test the effect of one change I would have to restart, and the laptop would not restart because of the black screen issue, or would immediately freeze. It was very frustrating and I had to work from safe mode to start with, but now it seems to behave better.

But...

I have had several hang-during-reboots today, forcing ... Read more

A:Driver Power State Failure; ntoskrnl.exe; ntkrnlmp.exe

Check out the forum thread here "ntoskrnl.exe" BSOD - Windows 7 Help Forums

Since it is new or relatively new a complete reinstall using the ASUS recovery is recommended. That I saw on several searches.

Read other 1 answers
RELEVANCY SCORE 107.2

Hello.I am new here so please excuse me for any mistake i might make.

Just when i sing in my account i get an error and my laptop restarts.
My operating system is windows 8.
I have collected all the information you might need with SF diagnostic tool.

Attachment 48873

Hope you help me.

A:Driver Power State Failure ntoskrnl.Unkown driver.

Hi Simiskos123 & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the latest dump file for informative purposes :-

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa80046a3060, fffff880009bfb40, fffffa80088498f0}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys
Followup: MachineOwner
---------
1: kd> !irp fffffa80088498f0
Irp is active with 4 stacks 3 is current (= 0xfffffa8008849a50)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 2 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 ffffffffc000000e
[ 16, 0] 0 2 fffffa80046a3060 00000000 fffff88006e17018-fffffa80085907c0
\Driver\pci nvlddmkm
Args: 000000... Read more

Read other 3 answers
RELEVANCY SCORE 106.8

Hello,
I've spent days researching online - I've tried to find if I had any drivers to update by going to my Device Manager but all "update driver" results I get are the same: they are up to date.
My minidump file: https://drive.google.com/file/d/0Bz9...it?usp=sharing .

DRIVER_POWER_STATE_FAILURE
Bug check code: 0x0000009f
Parameter 1: 00000000'00000003
Parameter 2: fffffa80`07d0ba10
Caused by Driver: ntoskrnl.exe
Caused by address: ntoskrnl.exe+75bc0
File description: NT Kernel & System
Crash address: ntoskrnl.exe+75bc0

Windows 7 Professional x64 Service Pack 1
Lenozo Ideapad z500
8gb ram, NVIDIA GEFORCE 2gb
Intel Core i7

Any help is greatly appreciated!

A:Windows 7 Pro: Driver Power State Failure ntoskrnl.exe 0x9F

from the research Ive done previously etc; I do believe the ntoskrnl.exe possibly leads to ram issue. I would test the ram by running memtest86+ from the following link: its best to let it run overnight if possible and to run it several times to make certain it shows accurate results as sometimes errors wont show up right away. Here is the link to that:

Memtest86+ - Advanced Memory Diagnostic Tool

If you get any errors from the test; then its likely you have one or more bad ram sticks

Read other 9 answers
RELEVANCY SCORE 104.4

http://m.bestofmedia.com/sfp/images/...il-100x100.jpg


I hope someone can help been on this problem for a week now.

I have an external synth that conects via usb My problem is when i switch off the nord the usb ports crash and any new connection is not recognised until i restart my computer which when i do hangs on the shutdown page for about 10 minutes the i get bsod with error driver state failure or bad pool header.

I can start my computer then turn on and off the nord with no issues the problem only happens when i use it in cubase 7 as a midi track even if no midi signal is sent to the nord. The problem is when i turn off the nord by the power button the driver disconnects then if i try to reconnect the nord nothing happens in the device manager all usb that are still connected work but any new connection is not seen.

I have done a fresh install of windows 7 64bit updated all drivers for everything & windows updates.

I have tried disconnecting all usb devices and still the same problem. Im not over clocking or under clocking. I have tried a different usb lead, used various usb ports, external powered usb ports.

The drivers i have installed are nord a1 midi, clavia usb 3.02 driver & clavia compostite usb driver.The latest ones.

The units was working fine until about 2 weeks ago where i was able turn the unit on and off using cubase with no problems.

Hope we can find a solution to the problem.

Read other answers
RELEVANCY SCORE 104

New windows 7 install on one of my home built workstations. I have an appearantly random BSOD. It sometimes runs for days, sometimes hours. I may have multiple issues (I have not been around to see it). Usually I start folding at home (stanford project) and leave it when I am not using the terminal for CAD, CAM or FEA. I just upgraded to windows 7 for this build so I would fall in the noob catogory for windows 7 user. (example:I just figured out how to unhide all the folders). I am also not the only user of this machine so who knows what has been done in the last couple weeks.

The hardware is all the same as it was running xp with the exception of the harddrive (new Intel 520 240gb ssd) on a fresh OS install from new hd. Also the motherboard got a bios update. From the name of the BSOD I would guess my drivers need updating but between windows update, intel updates and EVGA updates I haven't found any that haven't been updated. I updated my forum computer hardware list if you need that.

Any help fixing this would be great.
// edit, files didn't attach properly

A:BSOD random, "Driver Power State Failure"

Sorry for the second post // edit to add files.

Read other 2 answers
RELEVANCY SCORE 102.8

Hi,

I have a 2 week old HP Envy 14, running Windows 7 Home Premium 64bit, 4GB Ram, and an ATI Radeon HD 5650 Graphics card.

Initially for the first few days the notebook worked well, no problems. This week, I encountered the dreaded BSOD. The notebook had trouble shutting down or restarting, taking 10-15 minutes or so. Upon rebooting, I get a BSOD with DRIVER_POWER_STATE_FAILURE message.

I also encountered the USB not recognizing anything that was connected to it after the computer started. If the mouse/ thumbdrive was connected before the computer booted up, it worked. If it was disconnected after booting up, and reconnected the mouse/ thumbdrive would not work. I do not get anything (no error messages or acknowledgement that anything was connected).

I checked the Device Manager, and there are no error messages.

Strange this is, these problems happen sporadically. Sometimes everything works well- USB working as it should, not issues restarting etc. Upon rebooting, the problem starts again.

I've tried updating the latest Win updates, drivers, HP bios etc but still no luck.

Please help. Thank you in advance.

A:BSOD Drive Power State Failure, ntoskrnl.exe, USB ports not working

Hi cabe and Welcome to SF!

First of all, hpdskflt.sys was mentioned in the crash dmp, it belongs to HP Mobile Data Protection System Disk Filter. I would download and install fresh copy of the driver, or might be uninstall it to see if it has anything to do with the crashes you've experienced.

For the mouse and thumbdrive, you might want to have their drivers installed properly, or perhaps you might want to try to have fresh re-install of USB driver by going to Device manager, under USB list you uninstall everything then restart your system. (To go to Device manager, right click on computer and choose manager)

In looking through your driver, I can see some out of date one:

Code:
btwl2cap btwl2cap.sys Fri Apr 03 19:28:45 2009 (49D6A9BD)
Broadcom Bluetooth L2CAP Service. Please download and install fresh update of it


Code:
RimSerial_AMD64 RimSerial_AMD64.sys Mon Nov 24 11:01:01 2008 (492ADDCD)
Virtual Serial Port driver for Blackberry. This need to be updated as soon as possible

BUGCHECK SUMMARY:

Code:
BugCheck 1000009F, {4, 258, fffffa800416d680, fffff80000b9c510}

Unable to load image \SystemRoot\system32\DRIVERS\hpdskflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for hpdskflt.sys
*** ERROR: Module load completed but symbols could not be loaded for hpdskflt.sys
Probably caused by : umbus.sys

Followup: MachineOwner
---------
Regard,

Tuan

Read other 7 answers
RELEVANCY SCORE 101.6

I noticed BSOD: Driver State Power Failure Randomly, New Asus G750JM and decided I needed to come here and report my own error with my G750JM. It's only happened twice, but the second time sparked me to try and figure out whats causing the issue. I know, with it being brand new (2-3 weeks old) there is no reason for this.

Unfortunately, I have no new information like when it's happening or how to replicate the issue, but I do know that is both has happened after quitting from Star Wars: The Old Republic FOLLOWING an Nvidia driver update I ran yesterday morning. It has not happened before then.

On the thread I linked, I noticed an issue to fix it was to uninstall and re-install the Nvidia updates. I was looking into doing that, but had no idea how. I understand a reply will take time, and I will await one. I hope I provided the correct information.

I look forward to any and all help received.

A:New G750JM DRIVER POWER STATE FAILURE at random

The uninstall/reinstall thing is done several ways.

I suggest uninstalling the nVidia stuff through Control Panel, then checking in Device Manager to make sure. If it's found in Device Manager, uninstall it from there by right clicking on the device and selecting "Uninstall". If you get a check box asking if you want to remove the driver software, check it in order to remove it.

Others will recommend driver cleaning tools (I don't think that they're necessary, but in most cases they won't hurt).
Here's the one I see recommended the most: https://forums.geforce.com/default/t...ted-08-10-14-/

Then download and install a fresh copy of the latest nVidia drivers.
For a laptop, get them from the PC manufacturer's website
For a desktop, get them from Drivers | GeForce
*******************************************************
One corrupted memory dump in the attached reports.
No sign of BSOD's in the MSINFO32 report.

Please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog))
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on Administrative Events
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).

Wh... Read more

Read other 10 answers
RELEVANCY SCORE 100.8

Hello, I have had unexplained freezes and crashes with my computer for a while now. I was hoping someone with more knowledge could possibly help me. I have recently also started to have the driver power state failure BSOD. Another new issue is that the computer takes long time to shut down, 2+ minutes, while before it has shut down almost immediatly.

? OS - Windows 7
? x64
? What was original installed OS on system? Win 7
? full retail version (YOU purchased it from retailer)
? Age of system (hardware) ~8 months
? Age of OS installation ~ 2 months

? CPU Intel Core i5 660 @ 3.33GHz Quad-core
? Video Card NVIDIA GeForce GTX470
? MotherBoard ASUS P7H57D-V EVO
? Power Supply - brand & wattage ZALMAN ZM-600 HP, Total 600W (hopefully that's the one you need.)


Thanks for taking the time to read this, hopefully you can help :)

-Anssi

A:Driver power state failure, random freezes... Help appreciated

Hello,

Most likely, your USB modem drivers are causing this trouble. See if you can find an update for them. If not, try disconnecting the device completely for the time being.

Also, install SP1: Learn how to install Windows 7 Service Pack 1 (SP1)

...Summary of the dumps:

Code:

Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Tue Apr 26 14:43:37.925 2011 (UTC - 4:00)
System Uptime: 0 days 7:47:29.393
*** WARNING: Unable to verify timestamp for ZTEusbwwan.sys
*** ERROR: Module load completed but symbols could not be loaded for ZTEusbwwan.sys
*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys
Probably caused by : usbccgp.sys
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_VRF_4_ZTEusbwwan_IMAGE_usbccgp.sys
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Thu Apr 21 13:54:32.140 2011 (UTC - 4:00)
System Uptime: 0 days 1:38:19.592
*** WARNING: Unable to verify timestamp for ZTEusbwwan.sys
*** ERROR: Module load completed but symbols could not be loaded for ZTEusbwwan.sys
*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys
Probably caused by : usbccgp.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_4_ZTE... Read more

Read other 1 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 99.6

Hi all,

First time posting to forums, I hope I did everything right.

So Since upgrading to windows 8 pro about 2 weeks ago, My computer seems to BSOD with DRIVER_POWER_STATE_FAILURE. I attached the pulled from the "SF Diagnostic Tool". and attached them to the thread. Could someone take a look at the files and let me know which direction I should take from this point?
Thanks for the help!

-Aeronerd1798

A:BSOD, seems to be random, POWER STATE FAILURE

Your BIOS dates from 2011. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

Only 20 Windows Updates installed. Most systems have 60 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

You have about 8 hard drives. What is the make/model/wattage and age of your Power Supply?
One is designated A: and another is designated B: - I suspect that this may cause issues as these driver letters were originally used for floppy disks - so some software/drivers may not recognize them properly. I'd suggest re-lettering them to another set of letters.

You must update the Intel Management Engine Interface (HECIx64.sys). Here' s the link for it at you mobo's support page: GIGABYTE - Motherboard - Socket 1155 - GA-P67X-UD3-B3 (rev. 1.0)

Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web. Removing some drivers may make the system unstable - so if you're unable to find updates, post back for info on the... Read more

Read other 24 answers