Over 1 million tech questions and answers.

Need Help Configuring Wireless Network

Q: Need Help Configuring Wireless Network

Ok.. so here is the situation...

I get Wireless internet from my service provider, (they send out a wireless signal and my computer picks up on it and uses it with its WAN card).

What I want to do is use my wireless router to get the signal, and then send the internet via LAN cable to my 2 PC's. Does anyone have any idea of how I go about doing this? And what is the best way to set up the Wireless Router???

(Here is an overview of what I Wish to accomplish

Wireless Internet Signal
.{
..{ (wireless signal)
(WIRELESS ROUTER)
|
| LAN HARD WIRE
.|________pc2
.|_________pc 1

RELEVANCY SCORE 200
Preferred Solution: Need Help Configuring Wireless Network

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Need Help Configuring Wireless Network

Read other 9 answers
RELEVANCY SCORE 64

i just brought a belkin 802.11g that runs 54mbps, but we i got it to work it, but it displays 11.0 mbps... it;s download speed is only 20k. how do i configure it properly?

btw my router is alos belkin 802.11g but it;s in my basement and my computer is two floors up....(might be a factor). I also heard that by installing sp2 it will make wireless connection run faster, is it true?

specs
p4 3.2
9800xt
512ram
120gb
asus p4c00-e dlx
 

A:configuring wireless network adaptor

Read other 8 answers
RELEVANCY SCORE 64

I downloaded Kai xlink. Dont know if you know what it is but it helps get a game online.I downloaed it and my internate connection goes away and then it is lost. I go to "view wireless connections" and it says windows it not running you wireless network settings. What ever program thaat is running it run that program. I uninstalled Kai think it was it and it was. I dont know why it is running my network settings but then I had to go and make windows run it. I have never heard of someone having this problem with this. Any help would be great.
 

Read other answers
RELEVANCY SCORE 63.2

Hello. My question is almost identical to Tanna's -- except perhaps for the details of my goofy system. Should we discuss here or should I start a new thread?

I have an ancient desktop (Pentium III 500 running Win98SE), attached to my wireless router (Westell 327W) attached to my DSL service. Just bought a lovely new laptop (running XP). The laptop's wireless connection is hitting the DSL flawlessly (which I sure don't want to screw up) but I'd love to know what I need to set up in order to network the two computers as well.

Just like Tanna, I'd like to, from the laptop, access the desktop's printer and scanner, as well as transfer files amongst the drives in both computers.

Do I need a separate wireless card for the desktop, or can I already do this through its ethernet card? Will I have any problems unique to the XP & 98SE coexistence? Etc. Etc.

Thanks in advance for any help, as I'm "old at" computers, but new at networking!

-- Randy
 

A:Solved: Configuring Wireless Home Network

Read other 9 answers
RELEVANCY SCORE 63.2

I have a desktop computer that is connected to my ADSL modem and printer, and it is also connected to a wireless router. My laptop computer, which has wireless, can connect to the Internet using the desktop's ADSL modem and router without any problem, but I would also like to be able to print from the laptop, as well as share files between the desktop computer and laptop.

How can I do this? Can someone please post some detailed instructions?
 

A:Solved: Configuring A Wireless Home Network

Read other 10 answers
RELEVANCY SCORE 62.4

Although this post isn't strictly related to an issue on my computer, perhaps it can still be addressed as it deals with the general security of a network. The physical setup of the network (which does provide for fully functional internet access) is as follows in terms of wire connectivity:

The wireless router is connected via an ethernet cable on its WAN port to a LAN port on a wired firewall. This wired firewall is connected to the modem via ethernet from WAN to WAN.

This configuration as previously stated provides for internet access. My question however, is if the external IP address on the wireless router is protected by the built-in security features of the wired firewall (once having enabled them in the firewall's web-based utility), or if the firewall is simply acting as a switch, in that it successfully relays the connection from the modem to the router without implementing its security features in the process.

If it is the latter, then I ask how to configure this setup so that the wireless router utilizes the firewall's security features properly.
 

A:configuring home network with firewall and wireless router

Read other 10 answers
RELEVANCY SCORE 62.4

Gday,

I've got a bit of a problem I'm having trouble solving. I have a Desktop which I'm trying to network with an EeePC for the purposes of internet connection and file sharing. Both are running Win7 Ultimate. I'm using a USB Mobile Broadband dongle on the Desktop, and a crossover cable between the two. Now, I can get the file sharing set up no problems with the Homegroup feature, and internet connection sharing works fine too. But my concern is that for some reason, Win7 is lumping the 'Local Area Connection' for the crossover cable and the Mobile Broadband connection together as the same 'Unidentified Network'. I've attached a screen shot to illustrate.

I don't like this. It means that in order to set up a homegroup (which is the only way I've been able to figure out how to get the file sharing to work), I have to set the 'Unidentified Network' to the 'Home' location. Considering this includes my connection to the internet, it really doesn't seem secure at all, especially if I enable file sharing.

Does anyone know how I can split the two connections ( the Crossover LAN and the mobile broadband) into two separate 'unidentified networks', so I can apply the 'Home' template to one, and the 'Public' to the other? Or any other means of setting up a secure crossover network with a shared internet connection?

Thanks in advance

A:Configuring Crossover network sharing and Wireless Broadband

Seriously? Not one reply?

Read other 1 answers
RELEVANCY SCORE 51.2

Hi. I have no more ideas on what to try next. Any help greatly appreciated.My laptop is running Windows 7 Professional 32bit and is fully patched. The Ethernet adapter (Marvell Yukon 88E8055) is enabled and the wireless adapter (Intel PRO/Wireless 3945ABG) disabled (via software and the hardware switch). Symantec Endpoint Protection provides AV/security (via group policy). It is highly likely the problem was self inflicted and not caused by a virus / malware.I use the cisco VPN client and wanted to upgrade it (a reinstall may have been sufficient but as I was going to the bother I thought I would upgrade) as I was having some annoying timeouts when using the client immediately after logging into my desktop.I started by removing the existing (old version 5.0.05.0290). During the removal the screen went black and the laptop was not responding; ie I couldnt get the screen to wake up. I ended up powering off by holding the power button for 5 secs. On reboot, it appeared that the old vpnclient (5.0.05.0290) had been removed and everything else was functioning as normal. So I tried to install the new version (5.0.07.0410).The vpn setup program gets as far as "Installing Network Components" and produces error "Error 27854. The network configuration lock is held by another application. Close all applications and run Setup again. If this message re-appears after closing all applications, reboot then re-try the install (the application holding the install lock may... Read more

Read other answers
RELEVANCY SCORE 50.8

i have windows 7 and i installed virtual box (ubuntu) to do this.

i want to have two linux gateways and those two machines should either have the same NAT or public routable ip address.
basically i want to install openswan and configure the ipsec. in order to do this i need two linux gateways.

can anyone guide me how to setup two linux gateways to do this??
 

Read other answers
RELEVANCY SCORE 48.4

I have heard of people connecting just a usb wireless lan adapter to a win xp desktop and configuring the desktop as a wireless router for another laptop with a wireless card to access to the internet. The only cons about this idea is that the winxp machine must be left on for the laptop to be able to access the internet. The pros is that i save on a wireless router. Can someone lead me through this or maybe there's a similiar weblink to help.

Any help is appreciated. Thank you in advance.
 

A:Configuring a wireless lan

You can buy a wireless router for as little as $40 if you shop around, I can't see jumping through the hoops to make this work being worth the effort.
 

Read other 2 answers
RELEVANCY SCORE 48

Hello,

I have to configure a 2nd NIC and wireless router, so that mobile devices connected to router can access Internet which is through NIC-1 with static IP: 111.125.230.33.

refer the attached file for my query, as it is hard to explain the whole details in words.

A:Configuring 2nd NIC with wireless-router

You don't need all that: if you have on wireless adapter connected to the internet, in Network and Sharing center click on Change adapter settings. You should see a Virtual WiFi miniport. You can use that one to create a virtual network which shares the "real" adapter's internet connection.
Can you see the virtual adapter in Network and Sharing Center?

Read other 1 answers
RELEVANCY SCORE 48

Some lady in my building wants me to install a wireless router for her and well her cable modem is downstairs and her computer is upstairs and she doesnt wanna buy a cable that long just so I could configure it so I was wondering if I could configure the router with my computer and just take it up to her like that?
 

A:Configuring Wireless Router

Sure, as long as you know what options she'll be wanting.
 

Read other 1 answers
RELEVANCY SCORE 48

Hi.
I am trying to set up a network. The operating systems are windows 98.I can't get them to see each other on the network.
Do you have to manually setup IP addresses or leave it as "obtain IP addresses automatically"
I've Networked XP machines using the network wizard and that worked perfect, but 98 seems more difficult.
Is there any web page on networking that would help me configure the network properly?
 

A:Configuring a Network

Read other 7 answers
RELEVANCY SCORE 48

Hi guys, this is my first post, ok i have in my house a little home network, but i can't share files. I have tried to configure all this pc's with the wizard of Windows XP, but isn't not work. All PC's has the same Group, in no one pc i can't see the resources of the others PC in the network, please help me, I need share files.

I have designed a diagram with specifications in Microsoft Visio: Check the Attached files.

Someone with experience in network to configure it without the wizard of Windows "Set up a home or small office network"???'.

Any suggestion is good.

Email

 

A:Configuring this Network

Read other 10 answers
RELEVANCY SCORE 47.6

I'm trying to set up a wireless workgroup at home and am wondering if I'm doing it right so far. Here's how I have it configured so far....maybe someone can tell me if I'm on the right track:

1. 1 DSL modem/4 port switch/wireless capable(IP 192.168.1.1)(DHCP with range from 192.168.1.10 to 192.168.1.100) with a hardwire from one of the ports to the Internet/Uplink port on a linksys 4 port/wireless router(IP 192.168.1.2)

2. First router on channel 1, second on channel 6

3. Both have the same SSID

4. Both are WEP enabled with the same key

That's all I can remember for now. I'm trying to have seamless crossover when moving away from one router and getting closer to the other. Also, will I need to configure anything on the routers to have File and Printer Sharing work? I have read that NetBIOS has some issues with using multiple wireless routers.
 

A:Configuring multiple wireless routers

I'd make them different SSID's. You can put both of them in the list of preferred connections. That's how I run my routers, but I use WPA here.
 

Read other 3 answers
RELEVANCY SCORE 47.6

With XP where laptops have both a Wireless NIC and a LAN (Wired) NIC I configure the IP settings identically except for the laptop's IP address - eg.

Wireless Adapter
=============
IP Address: 192.168.0.21
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
Preferred DNS Server: ...
Secondary DNS Server: ...

LAN Adapter
=========
IP Address: 192.168.0.22
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
Preferred DNS Server: ...
Secondary DNS Server: ...

It is then a simple matter to switch off the Wireless Adapter & plug in an ethernet cable or unplug the cable and turn on the Wireless Adapter to switch the connection type. This has worked fine for years.

This does not seem to work for Vista. I can only have a Default Gateway on the active NIC and must make it so before I activate it otherwise I get the following error messages when trying to configure the NIC's IP settings.

"Warning - Multiple default gateways are intended to provide redundancy to a single network (such as an intranet or the internet). They will not function properly when the gateways are on two separate, disjoint networks (such as one on your intranet and one on the Internet) Do you want to save this configuration?"

If I ignore the warnings, then there is no Internet Connection. Is there any way I can achieve the simplicity that was available under Windows XP?

Any help would be appreciated.

A:Configuring Wireless & LAN NIC Gateways on Laptop

Hi Woody,

If you want simplicity use DHCP and only one connection at a time.....If you specify identical Default gateways and DNS address`s on active connections Vista will try use both and in your case they are both identical so it gets confused.

Just use one connection at a time or change the IP range for one adapter and use DHCP or Vista will just keep confusing itself with what default connection it should use.

Steven

Read other 17 answers
RELEVANCY SCORE 47.6

Hi.

I didn't know where I should post this, mods please move as appropriate.

I recently changed ISP from Tiscali to Direct Save Telecom. I received a letter the other day saying that the switch had been made. However I still have the same issues as before and haven't done anything actively to 'connect' to their provider. The router is still configured to Tiscali. I'm a little confused as to how it all works.

Anyway I have been attempting to configure the router to DST, assuming this would complete the switch and halt the Tiscali usage.

So I entered 192.168.2.1 in my browser and entered the setup wizard. When asked for the ISP DST wasn't on the list and this means I have to manually enter some things. When I just tried going with the default, it wouldn't connect, only inputting the old Tiscali details reconnected me. I don't have a clue what they refer to and my DST literature doesn't suggest what I should input there:

Connection type: PPPoE, PPPoA, Dynamic/Fixed IP (1483 bridged), Static IP (IPOA), Modem Only (Disable Internet Sharing)

IP assigned by ISP: Yes/No (No opens up more fields)

VPI/VCI: Both require numerical entries

Encapsulation: VC MUX, LLC

MMU: Another numerical entry, default is 1454

Could anyone give me an idea what to enter in these fields?

I'm stumped. Thanks for your help.
 

A:Configuring my Belkin wireless router to my new ISP

is this a router-modem or one or the other?
whats the model and brand?

If its a simple router, then its mainly dependent on your modem a;readu having access to the ISP service already. Then configuring your router to use the modem as a gateway..

If its a combo unit, or the modem, then the settings you may need to tweak with. I'm not familiar in what your ISP settings are for you, since i don't live in the UK, but theres a few things to try..

-Reset your unit to manufacturer's default
-download the latest firmware from the manufacturer and update
-read/download the manual for your unit and have a read. Often it will give you explanations of what each things do and mean.
-contact your provider and ask them if they can assist you in someway..
 

Read other 4 answers
RELEVANCY SCORE 47.6

I have just bought a Netgear WGPS606 wireless print server but when trying to configure it with my PC it says that the installation assistant cannot detect the print server. It says that there are three possible reasons for this:

1) The cable is unplugged (It isn't)
2) The print server is switched off (It isn't)
3) A firewall is preventing it from seeing the server (I have disabled it)

WOuld anyone have any idea what I am doing wrong?

Thanks
 

A:Configuring Wireless Print Server

Read other 8 answers
RELEVANCY SCORE 47.6

configuring of wireless networking card in lab top computer, to be able to find the hot spot.
Thanks!!
 

Read other answers
RELEVANCY SCORE 47.6

I have just obtained a laptop with Vista as the OS. Have a home wireless network running off an XP OS computer with WPA encryption. When I try to configure Vista it has WPA-Personal and WPA2-Personal options, neither allow a connection to my network. Has anyone overcome this problem, if yes how ? Access point is 3com.
 

A:Configuring Vista for Wireless Networking

Read other 6 answers
RELEVANCY SCORE 47.6

I set up my laptop to print to my desktop via my wireless network. It appears that Symantec blocks the print job unless I turn it off the network threat protection then it works with no problem. My question is how do I configure Symantec to allow the print job? Thanks for the help!

Read other answers
RELEVANCY SCORE 47.6

Hi,

I'm trying to set up a home network, so far I have a wired network where I have a domain controller running with AD, DNS and DCHP. On this machine (physical) I have 2 ethernet cards. I have a wired connection coming from the main IP Router to this machine, then i have a connection from the 2nd ethernet card going to a 8 port switch which i have a wireless AP connected.

What I am trying to configure is that I can turn the wireless connection off on the main IP router and use the wireless AP as the main wireless connection to the network but i'm not sure on which way round i need to configure the IP's, default gateways, etc...

The IP Router has an ip range of 192.168.1.64 - 192.168.1.253 and the Default Gateway is 192.168.1.254

On the Domain Controller:
I have Ethernet 1 configured as IP: 192.168.1.70 Default Gateway: 192.168.1.254 (Set to share the internet connection)
Ethernet 2 IP: 192.168.1.71 Default Gateway: 192.168.1.70 DNS: 192.168.1.70, 192.168.1.254

DHCP is disabled on the main ip router and the DHCP server on the machine is giving out ip address from 192.168.1.100 - 192.168.1.200

With this setup I am getting errors that the machine can't connect to the internet and any devices connection to the AP cannot see the Network.

I am new to the network infrastructure setup and so any advice would be greatfully appreciated.
 

A:Configuring Wireless Access Point

Make sure you set a static IP address for your server since you turned off DHCP for the main router, thus your Windows server will not be served automatically with an IP and DNS information.

Then afterwards, confirm your machine is able to ping the default gateway (your router) and then once that is established, then you would just connect your LAN together as you normally would.
 

Read other 1 answers
RELEVANCY SCORE 47.6

I'm trying to ensure I have wireless coverage in my entire house and having extreme difficulty getting all machines to play nicely

Wireless modem router #1 (downstairs in my house) is connected to the ADSL line and has the following config:

IP Address = 192.168.1.1
DHCP on
DHCP pool 192.168.1.3-192.168.1.100
Subnet = 255.255.255.0
Wifi channel = 1

Wireless router #2 (upstairs) is connected by ethernet cable to Wireless modem router #1 and has the following config:

IP Address = 192.168.1.2
DHCP off
Subnet = 255.255.255.0
Wifi channel = 11
Different SSID and encryption key to Wireless modem router #1

With this configuration, I can connect to the internet via both routers and all seems to be well. Except... having established a connection through either one, my machines will only make a pretend connection with the other one. By "pretend", I mean that the (Windows) machine says it has an excellent connection to the router but can only see machines on the LAN - it cannot get to the internet even though other machines are connected through the same router to the internet.
For example, if I'm sitting next to the downstairs router and establish a connection with it, all is well. Then I move upstairs and my machine switches to the upstairs router. Signal strength will be reported as "Excellent" and I'll be able to connect to the local NAS or printer but no external devices or sites.
I have tried having the same SSID and wireless configuration o... Read more

A:Configuring 2 wireless routers to work together

Read other 6 answers
RELEVANCY SCORE 47.2

Hi,

On a previous post I had been told that after setting up the home network I would need to configure any 3rd party firewalls manually.

I have norton internet security on the desktop and was able to do it with no problem.

But on the laptop I now have Zonealarm and can't seem to find how to allow my desktop on the firewall in order to be able to file and printer share.

Any help would be appreciated.

Thanks
 

A:Configuring ZoneAlarm for Network

Read other 16 answers
RELEVANCY SCORE 47.2

Im trying to get the most out of my upload speed that i can.
I'm a frequent Skype user and i can get a good quality coming from the person im talking to, but my voice tends to cut off and become distorted for the other person receiving it
i ran a speed test and my results were
6.15Mb/s download
.33Mb/s upload

its not great i know, but its the best my isp has to offer for my area
but .33Mb/s upload should be more than enough for me to send a high quality voice call
i have already set QOS to make Skype a top priority, im not sure if that has any
effect on upload

is there anything i can/should change to help?
someone recommended i use tcp optimizer, but others said i shouldnt try that with windows 7

any help will be appreciated

A:configuring network for skype

If you are downloading/uploading something it will be good to cancel that. Also what's that .33Mb/s?
I have this connection,and don't have any problems with skype even when I'm downloading torrent
I think that upload speed is not real,but should be over to 5-6.

Read other 6 answers
RELEVANCY SCORE 47.2

I have DSL from Bellsouth and I have a block of static ips. These ip are used to all most fo my machines to gain access to the outside world.

I want to be able to set up a second router with privatly assigned IP's 192.168.x.x to work with my wireless system. I woud like them to be DHCP assigned.

Here is the kicker I want to use the Bellsouth Statics to give Internet access to the private IP's but I am not sure on where to look for this information or how to start.
I have a Netopia Modem/Router combo handling the STatic Ip's
I have a Linksys WRT54G handling the DHCP addresses

I thought bu configuring the Linksys router to have a Static IP address from Bellsouth would work but then again it didn't and I am here.

Any help will be appreaciated
 

A:Network Configuring 2 Routers

Read other 12 answers
RELEVANCY SCORE 47.2

Hi, I set up connection to 2 of my pc's through a wired connection to my router. How do I set up the PC portion of it so I have a network? Both pc's are using windows 10 pro. I havent done this since windows 98 so its been a while. Any positive help is appreciated.

thx
 

A:configuring a wired network

If you have two (or more) devices connected to the same router they are already on the same network.

With Windows 10 then you can try to use a Homegroup or you can enable file and printer sharing. I think that enabling file and printer sharing is similar to the following (I can check later if this doesn't work) ...

Short description for Windows 7 and 8/8.1 file and printer sharing:

Go into the Network and Sharing Center from the Control Panel or from the Network icon in the Notification Area. Your network must be designated 'Private' (or 'Home' or 'Work'). Click on Change advanced sharing settings. In the Private or Home or Work section you can configure File and printer sharing, Public folder sharing, and Password protected sharing.

You may want to change the Workgroup name. To check it or change it right click on "Computer" and select "Properties."

You must uninstall or properly configure any non-windows firewall (security suite).
 

Read other 1 answers
RELEVANCY SCORE 47.2

Okay, I have a small home network using a D-Link wireless router.

I have 3 boxes, 1 - WinXP, 2-WinServer2003, 3-WinServer2003

Right now they are setup and share an internet connection but that is about it.

box1 is my main PC for games and work and has a USB printer haooked to it.
box2 is my webserver
box3 will eventually be my webcrawler/email server

What I want to know is, can the 3 boxes share the 1 USB printer?
Also I would like to configure the network so all 3 boxes can access a shared network folder for passing files back and forth.

I am not a network guru by no means, it took me a while to get my current setup so any guidence is very appreciated, also the more 'dummy proof' the better.

So if anyone can tell me how to acheive this setup or point to some articles that can I would be very grateful.

Thanks,
 

A:Configuring Windows network

Enable/Disable Windows File & Printer Sharing:

http://compnetworking.about.com/od/windowsfilesharing/ht/enable_disable.htm
 

Read other 2 answers
RELEVANCY SCORE 47.2

I have very little knowledge of networking. I have had configured my home network with the help of online guides and tutorial and mainly by hit and trial, last year and it performed successfully. It may not be perfect but it worked and this is how it has been working.

Setup1.
ADSLModem provided by ISP (PPOE 192.168.1.1 and subnet mask (255.255.255.0) DHCP enabled range (192.168.1.50 to 192.168.80) and default DNS by ISP. UPNP enabled (but nothing configured here and in NAT as well, as things were working fine so I never touched it) Wireless (OFF)
NOTE, I can't tell if my ISP registers Mac of this modem to authenticate the services)

Setup2
LinksysWTRG router with DDWRT 2.4 installed with auto 'configuration DHCP' (guess this enables connections from the SETUP1 for WAN, hence IP 192.168.1.50), subnet mask 255.255.255.0, gateway 192.168.1.1 and DNS 192.168.1.1. LAN setup; ip 192.168.2.1
Subnet 255.255.255.0, gateway 192.168.1.1. DNS by UnblockUs.com to access Hulu, Netflix etc outside U.S. NAT services and UPNP enabled with nothing specifically mentioned to forward the services to.
Wireless enabled. And DHCP Server enabled for LAN IP 192.168.2.100 to 192.168.2.130.

Setup3
16 port switch that is hosting Roku, Bravia LCD, 2 NAS and a windows seven Laptop wired. All the devices on the switch are connected to Setup 2 through wire and wireless, like iPhone, iPads etc.

Setup4
TpLinkRouter set on Dynamic Ip configuration with auto Ip for wan and 192.168.2.20 for LAN. With subn... Read more

Read other answers
RELEVANCY SCORE 47.2

Hi,

First of all, my computer is the main gateway for access to the internet and I have one other computer which uses my internet and is locally networked with my computer. The other computer's IP address ranges between 192.168.0.2 and 192.168.0.255.

I just installed ZoneAlarm Security Suite and when I first ran it, it asked me to allow a network and I added it into the internet zone. It had the IP address as 192.168.0.0, so I assumed this was the local network. But even though I allowed this, the other computer can't connect to my network nor get internet access from my computer. I have also checked the 'This computer is an ICS gateway' option, yet the network still doesn't seem to work and I also have an IP range between 192.168.0.0 and 192.168.0.255 in the internet zones section of the firewall.

I also have Windows Live Messenger at Super Trusted Level, yet it still doesn't connect...

Could someone please tell me why it doesn't work?

Thanks for your help.
 

A:ZoneAlarm: Configuring Network

bump
 

Read other 2 answers
RELEVANCY SCORE 47.2

Dear Users,
I want to configure two network cards in windows 2003 standard edition.
One of my lan card is connected to my local lan and other to the internet, The Pc acts as a proxy .

when i am accessing my local intranet, the site is searched in MSN ( internet), i want to access both intranet and internet.

please suggest a solution,.
 

A:Configuring Two network cards

Install two cards
Install RRAS on the server
Configure RRAS
You would also need "proxy" software

Cheers!
Scully
 

Read other 1 answers
RELEVANCY SCORE 47.2

I have a D Link 624 router connected to my computer that's running windows XP SP2.
I had the network up and running for about 6 months with no problems. I had to go away for about a week and when I came back it wouldn't connect to the internet anymore. I ran the ethernet cable directly from the dsl modem to the computer and couldn't connect that way either. I called verizon and they had me type in 192.168.1.1 and the helped me through the setup process and I was back online. I still can't get the network to work though. After hooking the network back up I typed in 192.168.0.1 for the D Link configuration page. At login I typed in admin and left the password blank as instructed. The configuratin page won't load. The login screen just keeps coming back. I probably shouldn't have touched the reset button on the router but I did.
I went to the D Link support page and tried different things with no luck.
Any suggestions?????

Thanks
wgc19136
 

A:problem configuring network

Read other 9 answers
RELEVANCY SCORE 47.2

Anyone know a website that tell u how to configure your network card to work properly? If not can someone explain what i need to configure in my contorl/network or network neighborhood/properties.

Thanks,
 

A:Configuring network card..

o yeah BTW i have DSL, Windows 98 Plus...
 

Read other 2 answers
RELEVANCY SCORE 47.2

Me and my friend have just bought two network adapters, hoping we can connect our two Pc's together.But we don't really know how to do this.Should we make one Pc to be a Server and the second one to be a Client?
If that's the case, how do we do it?
If not, what are the other options?
Thank you!!!
 

A:Configuring the Network Adapters

Moving this to the Networking forum. Please go there to look for replies.

Also, please take a look around that forum - I'm pretty sure they walked someone through a network set up a month or two ago.

------------------
Get free stuff and help out a poor computer tech
Don't forget the amazon.com GCs waiting for you - just listen to music while online!

http://www.rkfdcore.com/ebaypics/referrals.htm
 

Read other 1 answers
RELEVANCY SCORE 47.2

Hello,

I have a problem. I have a linksys Wirless 4-port router and a linksys wireless USB adapter (WUSB11 version 2.6). That is what I'm trying to get working on my desktop. I also have a laptop that my boss let me borrow to get me working at home with the desktop. The laptop has a YDI wireless card and it is reading the router's signal just fine and it's working and everything... so my laptop is working. I know I'm getting the signal. And so I'm pretty sure that the problem isn't hardware. The laptop has XP and the desktop has 98SE. The WUSB11 software on my desktop is reading both the router signal and the internet link I have, but it says "You are connected to the access point, but the Internet cannot be found". I am supposed to go to http://198.162.1.1 to configure the router on my desktop, as I can on my laptop, but it will not let me reach that site. It just says that the server cannot be found. Is there anyway you guys can help me? I would really like to get this problem fixed... I've been without Internet at my house for about a month and it's starting to really bother me.

Thank you very much in advance,
David Wilder
 

A:Help me with configuring linksys network please.

The correct ip you should connect to is 192.168.1.1
not 198.162.1.1
Let's start there....... This should be your default gateway as well.
 

Read other 1 answers
RELEVANCY SCORE 47.2

what would be the best settings for my network card ? The reason i ask is i read somewhere(i forget where) that Configuring this will help in online games ping and lag wise. Thanks

windows xp sp1
cable modem
netgear fa310tx erthernet

If you need to know something else please post
 

A:Configuring my Network Card

Download an app called Cablenut, or go to http://www.dslreports.com/ and run their tweak test. They also have a couple of tools there that might be of interest to you, such as Dr TCP. The tweak test will give you some recommendations for changing your settings if needed. Cablenut will do similar though it will give you the option of applying the settings for you.
 

Read other 7 answers
RELEVANCY SCORE 46.8

Hello to all,
I'm configuring my home wireless for the first time. I have bought ASUS wireless router RT-N10E

User manual is here:
http://www.produktinfo.conrad.com/d...19-an-01-en-ASUS_RT_N10E_WLAN_ROUTER_N150.pdf

The current setup at home is the following. I have ADSL modem which is set up in the router mode so I have ethernet cable which I plug to my notebook and IP address is assigned automatically and Internet works fine. There are no any setups.

Now according to the manual, this setup of wireless router should be fairly easy. Now network cable that was previously going to the notebook is plugged in to WAN input port on wireless router, and new ethernet cable is connected from one LAN port to notebook (just for the purpose of setup).
So, I use this quick install setup but at the first step: "Detecting connection status" fails so I need to skip to manual.

Can you assist me here? If everything is put on automatic it still doesnt work. I have put everything to factory settings and wait for your instrctions. I cannot understand why this auto detect QIS is not working and I'm not sure what to do manually.

I didn't try to set up all adresses manually. Right now this ADSL modem that was used to go to the Internet through ethernet cable have 192.168.1.1 IP address, but this same address have also wireless router.
My friend told me that this doesn't matter since all I need is to use that ethernet cable from ADSL modem that at first was going to... Read more

A:Solved: Configuring wireless router for the first time

Read other 8 answers
RELEVANCY SCORE 46.8

Hi everyone,

I recently switched my phone deal to one which included phone AND broadband rather than just phone. They had to send me a new username and password for my router which is an OfficeConnect ADSL Wireless 54 Mbps 11g firewall router. They also sent me a simple modem. In orer to connect through the router, I have to go to their webpage and type in a username and password, but on putting them in it doesn't work: I get to the 'configure' page and it won't let me past, as the next page says "Internet Explorer Cannot display this webpage."

I've tried my provider who insist the password is right, and it must be as I am currently connected to the internet via the modem they sent which requires the same new password. I just can't get passed configuring the router, which used to work perfectly. I have checked with my provider who says I am a PPPoE and VC-MUX and these are the only other settings I have to decide. I was wondering if anyone had any suggestions. With 2 kids in the house, we are finding it a struggle only having one computer which can connect to the internet.

Thanks so much for any help at all,

Kat
 

A:configuring OfficeConnect ADSL wireless router

Read other 10 answers
RELEVANCY SCORE 46.8

Configuration:X240 with Sierra Wireless EM7355 - Gobi 5000 with driver package V3.11.1310.3981Access Connection V6.21Windows 7 SP1 64BitWireless Provider Telus in Canada Problem I have is whenver I boot my system, the modem get "configured" with the following message"Configuring Mobile Broadband device" and goes form 1% to 100% (about 3 mins)Then the first itme I try to use the mobile boradband, it does the same thing.I am then able to use the internet connection.When I look at the speed, it says 21Mb connection. Help - Questrions:1. How do I get the system to not constantly configure the modem., I owuld think it would only need to do this once.2. Sometimes, I see speed of 42mb, not sure how/why I get the slower speed 95% of the time. This is very frustraitng since nobody wants to wait 5 mins before they can connect to the internet.

A:Sierra Wireless every boot "Configuring Mobile Bro...

I've been fighting with this, too. No answers yet.

Read other 4 answers
RELEVANCY SCORE 46.8

I am having trouble having windows configuring the wireless connection.

When I go to view the wireless networks, I get a message that says "Windows connot configure the wireless connection."

It instructs me if I want Windows to configure this wireless conenction, start the Wireless Zero Configuation (WZC) service.

It also states for information about starting the WZC service, to see article 871122 in the Microsoft Knowledge Base on the microsoft.com web site.

I did that and was told to use the following instructions to start the service:

Click Start, click Run, type %SystemRoot%\system32\services.msc /s, and then click OK.
Double-click Wireless Zero Configuration.
In the Startup type list, click Automatic, and then click Apply.
In the Service status area, click Start, and then click OK.

I do all of that, and when I get there, it is already lsited as on "automatic."

I must do this every time I need to change my wireless conection.

Is there any help one out there that can point me in the right direction to correct this
probelm?

I thank you well in advane for your help.
 

Read other answers
RELEVANCY SCORE 46.8

Hello to the incredibly helpful people who may be reading my post!

I have:

1 X Netgear ADSL2+ Modem DM111P
1 X 3Com OfficeConnect Wireless 11g Cable/DSL Gateway WL-525

I have used the wireless device previously with an Alcatel ADSL Speed Touch Modem using PPPOE no problem. Now I have the Netgear modem and i'm stuck with PPPOA.

Internet solely through the Netgear modem and my laptop works fine. Now I want to plug the 3Com wireless router into the Netgear modem but it's not working.

I plug the cables in all ok. So that the Netgear ethernet port plugs into the 3Com Ethernet/Cable/DSL port and I connect wirelessly or cabely to the 3Com.

I'm forced to use PPPOA bridged to connect and I can see that the 3Com is allocated a public IP address from my ISP. So i'm wondering why I can't surf the net!?

So to be clear, I can see/access the 3Com from my laptop, the laptop is getting an IP address through the modem using PPPOA bridged, but its not routing through.

I've tried manually configuring DNS on my laptop, but no luck.

If anyone has any ideas, I'd be most interested in reading them!

cheers,
Ivan.
 

A:Configuring a ADSL modem + wireless combo

Read other 6 answers
RELEVANCY SCORE 46.8

I am having trouble having windows configuring the wireless connection.

When I go to view the wireless networks, I get a message that says "Windows connot configure the wireless connection."

It instructs me if I want Windows to configure this wireless conenction, start the Wireless Zero Configuation (WZC) service.

It also states for information about starting the WZC service, to see article 871122 in the Microsoft Knowledge Base on the microsoft.com web site.

I did that and was told to use the following instructions to start the service:

Click Start, click Run, type %SystemRoot%\system32\services.msc /s, and then click OK.
Double-click Wireless Zero Configuration.
In the Startup type list, click Automatic, and then click Apply.
In the Service status area, click Start, and then click OK.

I do all of that, and when I get there, it is already lsited as on "automatic."

I must do this every time I need to change my wireless conection.

Is there any help one out there that can point me in the right direction to correct this
probelm?

I thank you well in advance for your help.
 

A:Trouble Having Windows Configuring my wireless connection

Read other 7 answers
RELEVANCY SCORE 46.8

Okay so to start off the configuration at my office was DSL modem-wireless router-switch- 6 computers.
One computer could connect to the internet and the rest couldn't however every computer could get to one another over the network. We got a new DSL modem that has the wireless router built in. I disconnected the old wireless router and modem and connected the new modem/router combo. Now the one computer that could get to the internet can no longer do so unless I go in and auto configure for IP and DNS. This poses a problem because when I do so that computer can no longer connect to any other computer on the network. What do I need to do to straighten this out? We would like to still only have that one machine connect to the internet. I could have all the machines on the network auto configure but then they would all be able to connect to the internet, right? Thanks in advance for any help it is appreciated.
 

A:Solved: help configuring network at office.

The easiest solution might be to change the router's LAN address to match the previous router/existing static IP address assignments already set on all the PC's and then re-setup the static IP on the one that needs to access the internet correctly(as previously set).

I assume what is happening is that the new router is handing out addresses in a different range which doesn't correspond to the addresses already set on all the PC's. I also assume you are preventing internet access on the rest of the PC's by not entering DNS or Gateway addresses?

An alternate method, and there's actually several, is to enable filtering on the router to prevent internet access, most routers have some form of access control or internet restriction options these days. In that scenario you could switch to automatic IP assignments.
 

Read other 3 answers
RELEVANCY SCORE 46.8

The complexity/messiness of my office network is getting out of hand and I'm planning to rip it out and start from scratch. I've got about 35 wired devices spread over 8 rooms, plus a couple on wifi. Internet is from a BT fibre and a BT business hub. At the moment a single router port goes into a 16 port gigabit switch, which then runs off to other switches in different rooms. I've also got a couple of machines acting as file servers.

I've got an accounts department that has a lot of heavy traffic internally, so I need to make sure that their internal traffic doesn't slow down the network as a whole. But they still need to also access the same shared files as everyone else.

Also, it would be great to support a guest wifi login, that allows internet access, but doesn't allow access to other devices on the network.

So, to configure:
Should I run all wired devices back to a single 48 port switch? Or run to a separate switch for each room?
Should I use 4 separate switches, one for each pair of rooms, each running into one the router's ports? (Would this allow greater concurrency?)
How would I separate the accounts department's heavy traffic from the rest of the building's network traffic, while still allowing file sharing?

Thanks
 

A:Configuring a wired office network

Do you have a closet or central location where you can locate all the IT equipment?

Personally, I would identify a closet/room to have house the IT equipment. Spend the money to have drops installed in the wall in the various rooms and then have all the cabling pulled back to this central closet/room and terminated into a patch panel. This would necessitate at a minimum a wall rack installed. At each location where you want a network drop installed, I would have at least two Ethernet jacks per drop.

I would use a single 48 port switch that has stacking capability. If you out grow the number of ports on the 48 port switch, you can add another switch to the 48 port you have now and have it act like one big switch.

Guest WiFi isn't a problem with a business class access point. I would look into products from Aerohive, Ubiquiti, Aruba Networks, or Meraki. These devices have a captive portal feature much like what you see in hotel settings.

As far as the account department's heavy traffic, what do you mean heavy traffic? What type of protocol/traffic are we talking about here? Your network doesn't appear to pose a large strain on any current switch. Other than isolating the accounting department for possible network usage, is there any other reason why you would want to isolate their equipment from the rest of the corporate network?
 

Read other 2 answers
RELEVANCY SCORE 46.8

Hey all -- I'll try to be concise.

In the House, there is Spectrum internet which should be about 200 Mbps wired. There is a router and an access point. In the house there are several devices, both wired and wireless. Both types of connection approach 200 Mbps (for wireless, this is assuming you are within a reasonable radius of the AP). So far, so good.

But -- I live in the Apartment about 80-100 ft away, up a bit in elevation as well as on the second floor. There is something like a 10ft differential between our flat and the room in the House.

To get internet in our Apartment, I have an EnGenius ENH202 (which advertises speeds up to 300 Mbps) configured as an AP w/static IP blasting towards our window from the House. It is behind a window, so the signal must pass through two windows currently.

Internet access via EnGenius is both unstable and slow. I understand speeds will fall off, but I cannot get above 20 Mbps on any device and usually range from 7-13. As to stability, the internet drops out often, EnGenius disappears from list of WiFi network access points, etc. Interestingly, sometimes we can connect to the Spectrum 2G network more easily and reliably than EnGenius, though not always and not for long. EDIT: For example, the speed test just had EnGenius at 16 Mbps and Spectrum 2G at 33 (sudden, new high). I could handle the lower-than-advertised speeds (probably user error, I know), but the instability is killer.

- I am not particularly confident that I have... Read more

Read other answers
RELEVANCY SCORE 46.8

I would like to confirm that the settings I have are correct for a second managed switch I am adding to my network. DHCP I have disabled, IP address I have found one on the network unused (192.168.1.xxx), subnet mask is 255.255.255.0. The only thing I'm not sure about is the default gateway setting - what should this be?

A:Configuring second managed switch on network

Default gateway should be the LAN IP address of the router you use to go to the Net, IE the one connected to your modem and or LAN IP address of a Modem/Router combo box.

But if you are disabling the DHCP server in a managed switch you are basically turning that managed switch into a dumb switch just like any other. Well not like any other Dumb switch.

Read other 3 answers