Over 1 million tech questions and answers.

Problem for saving modifications of registry in next reboot

Q: Problem for saving modifications of registry in next reboot

Hi,

I have been infected 2 days ago and Windows Update didn't work anymore (error code 80246008). So I have cleaned the corrupt files with MicrosoftFixit found on the Web.

Finally, I have got the BITS service working again with the following batch program wich calls himself the "BITS.reg" file :

sc create BITS binpath= "c:\windows\system32\svchost.exe -k netsvcs" start= delayed-auto
regedit /s c:\Users\fab\Desktop\BITS.REG
net start bits
rmdir %windir%\softwaredistribution /s /q
regsvr32 /s wuaueng.dll
regsvr32 /s wuaueng1.dll
regsvr32 /s atl.dll
regsvr32 /s wups.dll
regsvr32 /s wups2.dll
regsvr32 /s wuweb.dll
regsvr32 /s wucltui.dll
net start wuauserv

I execute this bacth file as Administrator and the BITS key appears in registry with Windows Update working fine.

The issue is that the modifications in the registry base is not taken into account for the next startup of Windows 7 : I can't see anymore the BITS key and I have to run this bacth program every time there's a new startup of Windows 7.

Is it a problem of right persmissions on this Key ? Have I got to change the owner as Administrator ?

Here is the file BITS.reg :

------------------------------------------------------------------------------------------------------------------------

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS]
"DisplayName"="@%SystemRoot%\\system32\\qmgr.dll,-1000"
"ImagePath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,76,00,63,00,68,00,6f,00,73,00,74,00,2e,00,65,00,78,00,65,00,20,00,2d,00,\
6b,00,20,00,6e,00,65,00,74,00,73,00,76,00,63,00,73,00,00,00
"Description"="@%SystemRoot%\\system32\\qmgr.dll,-1001"
"ObjectName"="LocalSystem"
"ErrorControl"=dword:00000001
"Start"=dword:00000002
"DelayedAutoStart"=dword:00000001
"Type"=dword:00000020
"DependOnService"=hex(7):52,00,70,00,63,00,53,00,73,00,00,00,45,00,76,00,65,00,\
6e,00,74,00,53,00,79,00,73,00,74,00,65,00,6d,00,00,00,00,00
"ServiceSidType"=dword:00000001
"RequiredPrivileges"=hex(7):53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,47,\
00,6c,00,6f,00,62,00,61,00,6c,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,00,\
67,00,65,00,00,00,53,00,65,00,49,00,6d,00,70,00,65,00,72,00,73,00,6f,00,6e,\
00,61,00,74,00,65,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,00,67,00,65,00,\
00,00,53,00,65,00,54,00,63,00,62,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,\
00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00,6e,00,50,00,\
72,00,69,00,6d,00,61,00,72,00,79,00,54,00,6f,00,6b,00,65,00,6e,00,50,00,72,\
00,69,00,76,00,69,00,6c,00,65,00,67,00,65,00,00,00,53,00,65,00,49,00,6e,00,\
63,00,72,00,65,00,61,00,73,00,65,00,51,00,75,00,6f,00,74,00,61,00,50,00,72,\
00,69,00,76,00,69,00,6c,00,65,00,67,00,65,00,00,00,00,00
"FailureActions"=hex:80,51,01,00,00,00,00,00,00,00,00,00,03,00,00,00,14,00,00,\
00,01,00,00,00,60,ea,00,00,01,00,00,00,c0,d4,01,00,00,00,00,00,00,00,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Parameters]
"ServiceDll"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,\
00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,\
71,00,6d,00,67,00,72,00,2e,00,64,00,6c,00,6c,00,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Performance]
"Library"="bitsperf.dll"
"Open"="PerfMon_Open"
"Collect"="PerfMon_Collect"
"Close"="PerfMon_Close"
"InstallType"=dword:00000001
"PerfIniFile"="bitsctrs.ini"
"First Counter"=dword:00000774
"Last Counter"=dword:00000784
"First Help"=dword:00000775
"Last Help"=dword:00000785
"Object List"="1908"
"PerfMMFileName"="Global\\MMF_BITS_s"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Security]
"Security"=hex:01,00,14,90,90,00,00,00,a0,00,00,00,14,00,00,00,34,00,00,00,02,\
00,20,00,01,00,00,00,02,c0,18,00,00,00,0c,00,01,02,00,00,00,00,00,05,20,00,\
00,00,20,02,00,00,02,00,5c,00,04,00,00,00,00,02,14,00,ff,01,0f,00,01,01,00,\
00,00,00,00,05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,\
20,00,00,00,20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,04,\
00,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,06,00,00,00,01,02,\
00,00,00,00,00,05,20,00,00,00,20,02,00,00,01,02,00,00,00,00,00,05,20,00,00,\
00,20,02,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Enum]
"0"="Root\\LEGACY_BITS\\0000"
"Count"=dword:00000001
"NextInstance"=dword:00000001

----------------------------------------------------------------------------------------------------

Any help would be appreciated

RELEVANCY SCORE 200
Preferred Solution: Problem for saving modifications of registry in next reboot

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Problem for saving modifications of registry in next reboot

Hi, lets get this straight you open regedit and the Bits service is there (as you posted). Then you restart your computer and do not run the .Bat file if you open regedit the bits service is completely missing from the registry? OR is it that Bits is simply not running in services (automatic delayed start)? Is your user name fab?

Read other 1 answers
RELEVANCY SCORE 64

I am running AdAware/AdWatch on Windows XP with IE6.
AdWatch is showing a continuous attempt to modify the registry. This is what the typical modification attempt log shows:
registry modification detected.

Ad-Watch event log
Root:HKEY_CURRENT USER
Key:software\microsoft\internetexplorer\main
value: search page
data:http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=iesearch
new data:http://www.google.com

Is this connected to MS' Windows Live Page that comes up with the opening of IE6?
Any input or help on what is going will be greatly appreciated. Thank you.
 

A:Ad-Watch showing continuous registry modifications

It looks like you had microsoft live search set as your search engine possibly when you installed a windows live component and then you installed something like google toolbar which wants to change it to google.

Did you approve or deny the change?

OR just turn off adwatch , make the change and turn it back on.
 

Read other 2 answers
RELEVANCY SCORE 64

Hello,

I wonder what the best tool for Windows XP is for viewing recent (preferrably as specified by user) modifications to the registry, including hidden ones if that is possible?

A:Tool for viewing recent modifications to the registry

http://www.nirsoft.net/articles/find_modified_time_registry_key.html

Read other 1 answers
RELEVANCY SCORE 50

I have a problem whereby I am trying to make these simple changes:

- Autoplay options, specifically associating windows media player to open automatically when a dvd is inserted
- Un-tick 'Auto hide' of the taskbar
- Remove some unneeded toolbars from taskbar

I make all the necessary changes and then after a reboot, the taskbar is auto hidden again.

The PC has admin rights, I'm shutting down completely, I have even gone through a few registry changes to force autoplay to work, but it doesn't.

I have even ran reimage.com's XP fixer, TNA.

Please help?

Nick

A:XP: Explorer is not saving any changes after reboot

Hello Nick

Try this fix
http://www.kellys-korner-xp.com/xp_tweaks.htm
Line 30 left hand side

Save the REG File to your hard disk. Double click it and answer yes to the import prompt

.

Read other 2 answers
RELEVANCY SCORE 49.6

can make changes to my registry that take affect and operate while the computer is on, but if I shut down and reboot those changes disappear (as if the registry reverted to the previous version. What would cause this. I have McAffee and Micro-softs anti-spyware software always running. I have done a full virus scan and spyware scan using both the Micro-soft anti-spyware and spybot S & D. Help me please!!!

Read other answers
RELEVANCY SCORE 49.6

I have just bought a new monitor, a 22" hanns g widescreen with a resolution of 1680 x 1050. It is HDMI so I have connected it to my Nvidia Ti4600 graphics card using a DVI-D to HDMI cable.

I can select the resolution and everything is fine, but whenever I switch the PC on the resolution has been reset back to 1024 x 768. I assumed that once applied, the new resolution would be saved and used at reboot. The annoying thing is that as well as always having to set the resolution, I can't arrange my desktop icons as they all end up crammed back in the middle of the screen after a reboot!

I have done a lot of searching but surprisingly can't find an answer to the problem. Can anyone assist? Is there a way to get XP to boot at 1680 x 1050 or correctly setup for my new monitor?

Thanks.

A:XP not saving screen resolution on reboot

Have you tried reinstalling the drivers? Or updating them if you're not using the latest ones.

Read other 2 answers
RELEVANCY SCORE 49.6

Hello all,

I have an issue with Windows Vista Ultimate not saving any changes after a reboot. I had an alureon.trojan Windows Security Essentials caught, but couldn't remove it. I had to download a tool to create a bootable USB drive to clean it off. After it said it removed the alureon I rebooted and upon loading Windows desktop it restarts on it's own. I can only get it to load Windows Desktop for about 2 seconds and it restarts.

I am able to get into Safe Mode and have made changes to the registry and also in msconfig, but everytime it reboots the changes are not saved so I'm kind of dead in the water. I've deleted reg keys, deleted files off the desktop, in Windows Explorer, tried changing startup services in msconfig, and also even created a new admin profile, but everything is restored back to the way it was after a reboot. I've never come across this before and I'm stumped.

Anyone out there have any ideas?

Much appreciated.
Thanks!
 

A:Vista 32bit not saving any changes after reboot

Read other 6 answers
RELEVANCY SCORE 49.2

How do you save the current Registry in Win2k? I would like this for future use in case something goes wrong.
 

A:Saving Registry in WIN2K

Read other 6 answers
RELEVANCY SCORE 49.2

I am attemping to follow well documented steps to resolve Windows 7 'User profile services service failed' issue during logon issue. When making required updates to the Registry ProfileList folder. (In Safe Mode)

Hit enter to open regedit.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
I recieve an error message when trying to save the desired changes (I get the error when attempting to either update the key or the value of the key).

Registry Editor can not rename S-1-5-21-532032067-2612370302-369722977-1001. Error while renaming key.

Or when trying to modify RefCount value from 1 to 0 . Cannot edit RefCount, Error writing the value’s new content.

Anyone know what might be causing this?
 

Read other answers
RELEVANCY SCORE 48.8

Heres my problem,
If i do as much as log out of my computer my personalized settings (such as putting a toolbar on the start bar, or moving an icon on my desktop) wont save. I get a window that says "Setting up Personalized Settings" when I logon to my account, or any others I create.

I've Google'd it and the only one I've found was not fixed, and all the others are talking about a file called loadwc.exe, which does not exist on XP.

Any help would be appreciated,
Mystic (Mac G.)
 

A:Solved: Personalized settings are not saving on reboot

Read other 15 answers
RELEVANCY SCORE 48.8

I've noticed that every time i reboot my windows xp sp3, the other person that im sharing my connection with cant get connected to the internet later. So when this happens, i have to use the ICS wizard to setup my pc to being a ICS host again. I have to do this every time i reboot or after i power back my pc.

How do i fix this?
 

A:Solved: Windows XP Not Saving ICS Settings after Reboot

Personally, I'd solve it with a broadband router.

You might try this process.
Disable ICS.
Run the repair below.
Enable ICS.

See if that keeps it from losing it's settings.
TCP/IP stack repair options for use with Windows XP with SP2/SP3.

Start, Run, CMD to open a command prompt:

In the command prompt window that opens, type type the following commands:

Note: Type only the text in bold for the following commands.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog

Reboot the machine.
 

Read other 3 answers
RELEVANCY SCORE 48.8

Having trouble with Word 2000 causing a system to reboot when saving a word document (.doc file) to a network drive.

Can save to a local drive, or open-change-and save existing documents.

Have already renamed the Normal template, and uninstalled and reinstalled office.

Any help would be greatly appreciated.

Rich Slack
Technology Assistant
Dallas School District
Dallas, Oregon
[email protected]
 

Read other answers
RELEVANCY SCORE 48.4

Hi all, I wonder if I could get some help?

Background:

I started to notice that google searches weren't displaying the correct results. e.g. searching for Spotify brought up loads of Spotify-related links, but not the official Spotify site itself.

After running various checks, I found I had a fair bit of malware, which I proceeded to get rid of using malwarebytes, spybot and a couple of others.

The issue appears to be that something managed to change my proxy settings in internet options (LAN settings, Use a proxy service...). A note at the bottom of that window would also advise me that some settings can only be changed by an Administrator (That's me!)

Un-checking the box wouldn't work, the proxy would always be present.

I searched online and saw others had similar issues, and someone suggested a solution that lots of people reported success with. Changing the registry setting under: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\Internet Settings, and changing the ProxySettingsPerUser key from 0 to 1.

This works perfectly, until I restart my machine, and the proxy settings get added again.

Any ideas at all how I can solve this?

A:Help needed saving registry settings

Try doing it from the true Administrator account. See how to enable or disable admin account here:
Built-in Administrator Account - Enable or Disable in Windows 8

Read other 11 answers
RELEVANCY SCORE 48.4

Hello,

My problem is about saving and restoring the registry under Windows 7.

I made a backup of my registry (using the "File -> Export" menu in "regedit.exe").

Then I tried to restore it as is using the "File -> Import" menu in "regedit.exe" (and I also tried using the command "reg import" in command line in "safe mode with command line").
It fails.
Fortunately I was on a test machine.
I'm very concerned about not knowing how to properly save and restore my registry.

Thank you for helping.
Best regards.

A:Saving and restoring the registry under Windows 7

Hello Lea,

The problem with using that method is that you will not be able to completely restore all of the registry since it's currently in use.

One option would be to create restore points that would include a back of the full registry. A system restore would restore the registry to how it was in the selected restore point.Registry - Backup and Restore
Another option would be to create a system image. It includes everything.Backup Complete Computer - Create an Image Backup
Hope this helps,
Shawn

Read other 6 answers
RELEVANCY SCORE 48.4

I have uninstalled CommonName Toolbar on Windows XP. Used Ad-Ware and a Registry Clean Program to remove entries from the registry and Startup for the CNBABE.DLL that loads during the start of Windows XP but cannot find the file.

Each time I cleaned the registry or removed the rundll32 CNBABE.Dll from the Startup it appears again. It will not save the removal from the registry or startup.

I installed CommonName Toolbar again and then uninstalled again and still have the same problem.

How can I get the registry and removal of the rundll32 \commonname\toolbar\CNBabe.dll from the Startup permanently in Windows XP.

Thanks for anyone who can help. Saw a program called Spybot. Haven't tried it yet.
 

A:Saving entries in the Registry & Startup

Read other 14 answers
RELEVANCY SCORE 48.4

I am trying to suppress all balloon tip messages. I've followed instructions to manually set the DWORD EnableBalloonTips to '0' (disable) in the registry, and this works until I log off. When I reboot (logon) it is back to '1' (enable). Also, I tried to use Tweakui to set this as disabled. Again, when I log off and back on, viola! It's back to '1' (enabled). I went in under safe mode as administrator and set this to disabled. Log off and back on and once again it's auto-magically enabled. Is there really a way to disable balloon tips and keep it disabled. I've looked everywhere I can think of and no one addresses the problem with this mysterious automatic enabling after disabling. Seems that while everyone talks about ways to disable it... no one talks about what to do to save this setting upon shutdown/logoff. I'm sure I am not the only user who has experienced this problem. Can someone help with this? Thanks in advance, and I really appreciate this forum.

A:Saving registry settings following shut down

Hi chiisai,

If you have XP Pro you could also try editing the Group Policy as well, although the reg edit should have done the trick.

Windows Key+R and type GPEDIT.MSC and hit Enter. Go: User Configuration > Administrative Templates > Start Menu & Taskbar and double click on 'Remove Balloon Tips on Start Menu Items' and choose 'Enabled' instead of 'Not Configured'

Read other 4 answers
RELEVANCY SCORE 48.4

I changed my mouse settings so that I can tap and drag in the control panel, but after restarting my computer, the mouse settings have that box unchecked.

My computer is this one; specs listed on site: Buy Lenovo ThinkPad Yoga Touchscreen 2-in-1 - Intel Core i5 - Microsoft Store Online

A:Mouse settings not saving; changed back after reboot

More than likely the problem lies in your mouse driver. I would uninstall/reinstall your mouse driver. Once I find a link to your model on the lenovo website I will edit this for you.

Edit: here you go this should be the link

Laptops and netbooks :: ThinkPad Yoga Series laptops :: ThinkPad Yoga :: 20CD :: 00B4US - Lenovo Support (US)

Read other 4 answers
RELEVANCY SCORE 48.4

Hey guys,

I'm trying to get my Nvidia Display settings to save under the Change Display Configuration panel and every time I reboot they seem to revert back to regular settings under another resolution.

I am using a laptop with a LCD monitor and I'm trying to get the "Only use one display (Single)" setting to stick, and it works when I hit apply but after the reboot it gets removed back to (Clone).

If anyone would be able to assist me that would be great.

Thanks
 

A:Nvidia Display Configuration Settings not saving after Reboot

I kept researching this issue and can only seem to find issues about this with Linux but not for Windows XP
 

Read other 1 answers
RELEVANCY SCORE 48

I would think all the 'techies' and many others know that the XP registry can be reloaded from the original registry entries stored in C:\Windows\repair in accordance with the procedure outlined here -> http://support.microsoft.com/kb/307545 .

The problem with this is that ALL changes since the original install are gone and recovering data from or repairing damage to the damaged registry files now saved to c:\windows\tmp\ is problemetic.

So, today, with a system running fine, I ran Recovery Console and used the copy command to copy all 5 Registry files of my current install to a new folder in C:\Windows.

I then booted normally and copied the .log and .sav files from C:\Windows\system32\Config, then also copied the systemprofile folder from C:\Windows\system32\Config there, as well as the userdiff and userdiff.log files.

I then copied all that over to a flash drive.

I hope I never need them, but at least I now have them reasonably secure.

A:Recovering from Registry Damage - Preventative Saving

CCT, that is an awsome link and really great information. Thank you for posting it man.

Happy New Year buddy.

Patmark

Read other 3 answers
RELEVANCY SCORE 47.2

Hi Seven Forums

Have a strange recurring issue and hopefully you guys can help me home in on the problem! Not 100% sure it's software over hardware though.

Situation is - saving a file in Visual Studio 2013 to my external hard drive (usb, exFAT, hardware encrypted) always causes an AppHang. The program stops responding, and any other program which tries to access that location on the drive does the same. These processes refuse to be killed and the only way out is to hard shut down the computer (regular shut down just sits there..). After doing so, chkdsk reveals that the location on the drive has corruption issues, which it then fixes and all is fine. Until the next time I try to save a file that is.

Some more information:

Only started happening about a month ago, before that the files saved fine.
Doesn't happen if I use the drive on another computer running similar Visual Studio
Other programs can save the same files fine. The problem did once occur with P4V, but I can't say with 100% certainty that it wasn't due to forgetting to fix with chkdsk following one of the reboots.
Tried saving files to other USB hard drives (FAT32 and NTFS, yet to try another exFAT) works fine.
My initial thought was PSU not being quite up to powering the drive, as I was already concerned that the wattage wasn't high enough for the machine. Beefier one made no difference though.
Some googling suggested system file corruption, ran System File Checker and there were indeed some corrupted files,... Read more

A:Saving file to external USB requires hard reboot & corrupts every time

If it helps anyone who gets here via google:

It turned out the issue was strongly linked to the drive being exFAT. A USB stick I formatted to exFAT also had the same issues. My conclusion was that it was likely a bug in the latest Visual Studio. Have reformatted my drives to NTFS and all is well.

Read other 2 answers
RELEVANCY SCORE 46.4

I've learned now heavily about the Files and Settings Transfer Wizard. I've also learned about the USMT, which I've not yet used in practice, but learned the basics of in the .inf version. Studying that was how I was able to learn this deep into the Files and Settings Transfer Wizard. Basically, the two have similar, but not exactly the same configuration.

Now here I'll post the configuration for the Files and Settings Transfer Wizard. I took what I found already there, and was adding features to it. I didn't create this from scratch, and it would've been silly to, as it's a configuration file.

My issue is that whenever I'm saving settings, anytime I tell it to save something from HKEY_CURRENT_USER in the registry, it does not work. I was needing to know if anyone knows why, so I can correct it please.
 

A:Files and Settings Transfer Wizard - Not Saving HKEY_CURRENT_USER Registry Branch

I just learned of this file. It might help too. I was repeating the options I used to see if this file came out or not for saving it. It did. Hopefully it will help, and reveal the issues.
 

Read other 2 answers
RELEVANCY SCORE 46

I change auto login on Windows 7 to auto login as X user. Now most of the time it works fine but after a while it loss all the changes I made when I go back and look in to why is not auto logging in. The login user is a Student and not account is network base so not sure if that is the matter or how to approcach this problem any thoughts? Thanks ahead of time if you comment.
Zak

A:Registry Droped After Reboot

Regretably hard drive corruption and the files on it, is sadly a fact of life.
Obviously backups are handy here, even just exporting the whole registry to another partition or drive allows you to import it, if and when things go wrong.

If you have system restore turned on for that volume you could reinstate things to how they were, when things worked properly.

Read other 4 answers
RELEVANCY SCORE 46

I've been having multiple problems since updating to Spyware Doctor 5. I'm unable to scan the registry with registry mechanic or e-using's free registry cleaner, the system reboots during the scan. Other unexpected reboots are happening, also.

Panda's Active Scan has identified the following:

Incident Status Location

Spyware:Cookie/Advertising Not disinfected C:\Documents and Settings\HP_Administrator\Cookies\[email protected][1].txt
Spyware:Cookie/Atlas DMT Not disinfected C:\Documents and Settings\HP_Administrator\Cookies\[email protected][2].txt
Spyware:Cookie/Atwola Not disinfected C:\Documents and Settings\HP_Administrator\Cookies\[email protected][1].txt
Spyware:Cookie/Bluestreak Not disinfected C:\Documents and Settings\HP_Administrator\Cookies\[email protected][2].txt
Spyware:Cookie/Serving-sys Not disinfected C:\Documents and Settings\HP_Administrator\Cookies\[email protected][2].txt
Spyware:Cookie/BurstNet Not disinfected C:\Documents and Settings\HP_Administrator\Cookies\[email protected][1].txt
Spyware:Cookie/Casalemedia Not disinfected C:\Documents and Settings\HP_Administrator\Cookies\[email protected][1].txt
Spyware:Cookie/Com.com Not disinfected C:\Documents and Settings\HP_Administrator\Cookies\[email protected][1].txt
Spyware:Cookie/Hitslink Not disinfected C:\Documents and Settings\HP_Administrator\Cookies\[email protected][1].txt
Spyware:Cookie/Doubleclick Not disinfected C:\Doc... Read more

Read other answers
RELEVANCY SCORE 45.2

My in-laws gave me their Acer Aspire v5 with Windows 10 to use.  After receiving the laptop, I went ahead and started cleaning it up.  I thought I had it cleaned up pretty well until I discovered an issue.  The issue is that I cannot log into a Standard User account.  When attempting to do so, it immediately signs me back out.  Other administrator accounts on the laptop sign in just fine.  If I change the Standard account to an administrator account, I can then log into the account.
 
I found that this registry key value is affecting the login behavior.
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogin\Userinit
 
Value "C:\windows\system32\userinit.exe, c:\program files\soluto\soluto.exe /userinit"
 
If I change the vaule to "C:\windows\system32\userinit.exe," I am then able to log into the standard user account.  However, when I restart the laptop, the value changes back to the original and thus I cannot log into the standard account.
 
There must be something I am missing.
 

Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version: 13-07-2016 02
Ran by Bryan (administrator) on ARNIESPC (13-07-2016 22:49:23)
Running from C:\Users\Bryan\Desktop
Loaded Profiles: Bryan (Available Profiles: Arnie & Kari & Bryan & Administrator)
Platform: Windows 10 Home Version 1511 (X64) Language: English (United States)
Internet Explorer Version 11 (Default browser: Edge)
Boot Mode: Normal
Tutorial for ... Read more

Read other answers
RELEVANCY SCORE 45.2

Ok so i have been having problems connecting to game servers and i found a fix that worked for a day
which was "netsh int ip reset" next day however i got the same problem so i did it again except this time it never saved the settings and if i change anything in registry settings they revert back to original after i reboot

can someone help me out on this??

please
 

Read other answers
RELEVANCY SCORE 45.2

I found a fix for a problem I have had using the knowledge on this Forum but it reviled a problem:

When I make the change to [HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\BIOS] it does not remain once the system is rebooted.

I need these

"BaseBoardManufacturer"="XXXXXX"
"SystemManufacturer"="XXXXXX"

to be permanently changed to

"BaseBoardManufacturer"="TOSHIBA"
"BIOSVendor"="TOSHIBA"

I have used regedt32 to deny the system to change/delete the information in the BIOS navigation folder of the registry but for some reason windows like to ignore the restrictions I set on it. As described here.

How do I do this.


I have a Toshiba Satellite P200-ST2061

The manual is here.

I upgraded to 4GB Ram and I have Windows 7 Ultimate Installed
I Have Linux Ubuntu 10.10 Installed as a duel boot.
I use Ubuntu for my main OS.

I am in college (2nd semester) as a computer and network technician so I will be able to understand a technical answer.

If there is a dos command line method that would be a more preferred as i wont have to mess around with the frustrating fail of the windows GUI.

A:How to Force Registry To not revert after reboot?

What are the values that it's detecting and putting in those fields? My guess is the hardware detection is finding something different than a Toshiba provided OS would detect and is changing it to what it finds.

Read other 5 answers
RELEVANCY SCORE 45.2

Hi I wonder if you could help me to find out if I've been infected?I run Win XP SP2 with Kaspersky IS 7.The symptoms I see are that after I reboot, Spybot is reporting a lot of suspicious changes to the registry.The first is to change my home page to :www.microsoft.com/isapi/redir.dll?prd=iepver=6ar=msnhomeThere are quite a few others that look more worrying.I deny them, but decided to reboot in safe mode until I find out what?s going on.I haven't seen anything else strange so far.I haven't been able to find out what's infecting me so can't give it a name.This is happening after I was surfing when Kaspersky detected a Trojan download which I denied.Following that, I upgraded Spybot then rebooted. I didn?t immunize til after the reboot.Since running in safe mode, I've run Adaware, Spybot, Malwarebytes' Anti-Malware & McAfree Stinger, and they all reported nothing.Housecall found & fixed :MAL_HFIRM-2 andADWARE_BESTOFFERSThis is the HJT log: ----------------------------------------------------------------------Logfile of Trend Micro HijackThis v2.0.2Scan saved at 16:30, on 09/11/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: Safe mode with network supportRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS&#... Read more

A:suspicious registry updates after reboot

Hello sbrot Welcome to the BC HijackThis Log and Analysis forum. I will be assisting you as we try to clean up any infections you may have.Please refrain from running tools other than those we suggest to you while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.In the upper right hand corner of the topic you will see a button called Options. If you click on this in the drop-down menu you can choose Track this topic. By doing this and then choosing Immediate E-Mail notification and then clicking on Proceed you will be advised when we respond the your topic and facilitate the cleaning of your machine.After 5 days if a topic is not replied to we assume it has been abandoned and it is closed.Please perform the following:Please do an online scan with Kaspersky WebScannerClick on Kaspersky Online ScannerYou will be prompted to install an ActiveX component from Kaspersky, Click Yes.The program will launch and then begin downloading the latest definition files:Once the files have been downloaded click on NEXT
Now click on Scan SettingsIn the scan settings make that the following are selected:Scan using the following Anti-Virus database:Extended (if available otherwise Standard)
Scan Options:Scan Archives
Scan Mail BasesClick OKNow under select a target to scan:Select My ComputerThis will program will start and scan your system.The scan will ... Read more

Read other 24 answers
RELEVANCY SCORE 44.8

Hi, writing on behalf of a friend whose computer won't boot into Windows. When you try to it has a BSOD and says that the registry is corrupt (photo below). From the boot menu I've tried every option, Last Known Good Configuration, Safe Mode (all variants) and Load Windows Normally. No matter which option is selected the same BSOD appears and the computer reboots. I have also tried booting from the Windows XP install disc, but even there the same BSOD comes up and the computer reboots. It loads all the drivers, but before it gets to the actual recovery console the BSOD appears.

He has Windows XP SP3, has not installed any new hardware or software recently and hasn't updated any drivers himself. Automatic updates were on, so that's all I can think of as the culprit for why this error has shown itself, otherwise there haven't been any recent changes that could explain this. The system has 4gb RAM and the hard drive is 500gb. I can get the specifics if need be, but it doesn't present like a hardware issue.

The internet tells me at this point his only real option is to buy a new hard drive, but I wanted to see if there were any solutions out there that I haven't been able to find.

Here's the photo of the BSOD:

A:BSOD - Registry Error - Continuous Reboot

tap f8 when booting and try

last known good configuration

Read other 3 answers
RELEVANCY SCORE 44.8

I am not an expert. At least once a month I use Disk Cleanup and delete (a) all but the latest restore point if all seems well and (b) the table of items that can be deleted that appears on first run of Disk Cleanup. I did this on Sunday 23 March and, when turning the computer OFF, saw that adjustments were being to the registry. Nothing like that happened when I turned the machine back ON.

I now discover that I can no longer add attachments to my emails using the dialogue box. I can add attachments via drag and drop. The email system (whether using IE11 or Google Chrome) just freezes when the dialogue box attempts to open and I have to shut down the browser(s) and re-open.

I still had the latest automatic restore point dated 21st March and ran that but it made no difference. I have been through sfc /scannow and it said some files couldn't be adjusted. I have the results of the scan and I have opened the file but do not understand the results. I get no error codes but I have downloaded (but not run) System update readiness tool. In safe mode I have also checked for booting problems but all seems clear.

I have McAfee Security software and I also run Hitman occasionally but my machine is said to be clear.

I may be wrong but it seems to me that 'something' went into a restore point when my last batch of Windows Updates were installed earlier in March. That 'something' got activated when I deleted the earlier restore points.

Does anybody have any bright ideas as to what ha... Read more

A:Registry adjusts when reboot after using Disk Cleanup

SFC /SCANNOW must be done in the proper fashion.
Use this tutorial by Brink. Please read completely.
Let us know the results. We need to know if sfc /scannow is happy with the system files before going any farther.

SFC /SCANNOW Command - System File Checker

Read other 3 answers
RELEVANCY SCORE 44.8

Hello,
 
I have a computer that keeps applying a storage quota to its profile each time it reboots. No group policy is set to enforce a quota and it appears whatever is doing this sets the storage quota via registry entry. I have tried running Malwarebytes and the machine does have AV on it but it doesn't detect anything. I am nearly certain this is some form of malware but no scanners appear to be able to pin it down.
 
Below is my DDS output and the requested attach log is attached to this post.
 
Thanks in advance for the assistance!

DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 8.0.7601.18667 BrowserJavaVersion: 10.71.2
Run by <REMOVED> at 16:45:38 on 2015-01-13
Microsoft Windows 7 Professional 6.1.7601.1.1252.1.1033.18.3893.2392 [GMT -5:00]
.
AV: Managed Antivirus Managed Antivirus *Enabled/Updated* {FFE93D16-FD09-0282-C7D3-8B1731B6A051}
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Managed Antivirus Managed Antivirus *Enabled/Updated* {4488DCF2-DB33-0D0C-FD63-B0654A31EAEC}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\svchost.exe -k LocalSe... Read more

A:Something Keeps Changing Registry on Reboot (Profile Quota)

Hey my friend. Please download FRST (by Farbar) from the link below and save it to your Desktop.Download Mirror #1If you are unsure whether you have 32-Bit or 64-Bit Windows, see hereDisable all anti-virus and anti-malware software to prevent them inhibiting FRST in any way. If you are unsure how to do this, see THIS.Double-click FRST.exe/FRST64.exe (depending on which version you downloaded) to run it. (if you have Windows Vista / Windows 7 / Windows 8: Please do a Right click on the FRST icon and select Run as Administrator)When the disclaimer appears, click Yes.Click Scan to start FRST.When FRST finishes scanning, two logs, FRST.txt and Addition.txt will open.Copy (Ctrl+C) and Paste (Ctrl+V) the contents of both of these logs into your next post please.

Read other 12 answers
RELEVANCY SCORE 44.8

Hi everyone!
It has been a while since I've posted to this amazing community. If anyone has any suggestions regarding my problem, I would greatly appreciate some help (hoping not to take my comp to the shop :s ).

Here's the deal:

- I run XP on my 3 month year old home-build pc.
- Everything was running fine last night. I shut it down before I went to bed.
- Today I went back on and it booted but froze at my desktop. I could not right click, ctrl alt del, open the start menu, access icons, etc.
- I rebooted a few times but nothing fixed the problem.
- I rebooted in safe mode, seems to be okay...
- Now whenever I reboot I get the following error: "One of the files containing the system's registry data had to be recovered by use of a log or alternate copy. the recovery was successful."
- After about 30 seconds of seeing this error, the computer reboots itself-- rinse, wash, repeat.

Registry errors scare the living bejesus out of me... so, any thoughts before I send this badboy into the shop?

THANKS!

A:Registry error forcing continuous reboot

Sounds like you need to repair the MBRhttp://support.microsoft.com/kb/927392http://support.microsoft.com/kb/314058

Read other 8 answers
RELEVANCY SCORE 44.8

Hello bp, i use Windows 7 64-bit on an Asus G75VW Laptop.
 
Here is a link to a previous thread where i was redirected here: http://www.bleepingcomputer.com/forums/t/500494/a-trojan-i-cant-seem-to-get-rid-of/
 
As i explained in that thread, i have a trojan showing up in Malwarebyte Anti-virus scans each time i reboot the pc after removing it.
 
Here is the DDS log: 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 10.0.9200.16611  BrowserJavaVersion: 10.11.2
Run by Sef at 6:35:51 on 2013-07-09
Microsoft Windows 7 Home Premium   6.1.7601.1.1254.90.1033.18.16344.12915 [GMT 3:00]
.
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPISvr.exe
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k NetworkService
C:\Program Files (x86)\ASUS\ATK Package\ATK Hotkey\ASLDRSrv.exe
C:\Program Files (x86)\ASUS\ATK Package\ATKGFNEX\GFNEXSrv.exe
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceAndNoImpersonation
C:\Windows\system32\svchos... Read more

A:Trojan.Agent in Registry, Replaces itself after reboot

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===--RogueKiller--Download & SAVE to your Desktop RogueKiller for 32bit or Roguekiller for 64bit Quit all programs that you may have started.Please disconnect any USB or external drives from the computer before you run this scan!For Vista or Windows 7, right-click and select "Run as Administrator to start"For Windows XP, double-click to start.Wait until Prescan has finished ...Then Click on "Scan" buttonWait until the Status box shows "Scan Finished"click on "delete"Wait until the Status box shows "Deleting Finished"Click on "Report" and copy/paste the content of the Notepad into your next reply.The log should be found in RKreport[1].txt on your DesktopExit/Close RogueKiller+===Search and delete the AdWare, PUP (Potentially Unwanted Program) installed on your computer.Please download AdwCleaner by Xplode onto your Desktop.Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click on Delete tab follow the prompts.A log file will automatically open after the scan has finished.Please post the content of that log file with your next answer.You can find the log file at C:\AdwCleaner[Rn].txt (n is a number).=== Please downloadJunkware Removal Tool to your Desktop.Please close your security software to avoid potential ... Read more

Read other 8 answers
RELEVANCY SCORE 44.8

Last night I had a pop up telling me that Trend Micro Anti Virus had updated and was in need of a reboot. So I ran the reboot before heading off for the night. Now this morning I've found that the run and reboot options are gone from my start menu. As well, Trend is not loading after the reboot and if I try to access the registry I'm told it's been disabled by the administrator.I found your site after running hijack this. Here is the log it created, any help would be greatly appreciated! Thanks in advance...Logfile of Trend Micro HijackThis v2.0.2Scan saved at 7:31:44 AM, on 7/18/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16473)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\eHome\ehRecvr.exeC:\WINDOWS\eHome\ehSched.exeC:\WINDOWS\runservice.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDOWS\system32\PnkBstrA.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\dllhost.exeC:\Program Files\NETGEAR\WG311T\wlancfg5.exeC:\Program Files\Microsoft Office\Offic... Read more

A:Lost Run, Reboot, Registry, Trend Micro

I know we're not supposed to bump the topic, I just thought of a few extra bits of information I forgot to add originally that might be helpful.

1. I don't know what type of infection is going on. I saw the comment saying I should say the type of infection but I never got an indication of what that is.

2. When I Ctrl-Alt-Del I'm told that the task manager rights were removed by the administrator.

I'll be running home over the lunch hour to run a sysclean on the box hoping to weed out any virus' while in safe mode.

Sorry for the second post, just thought the more information for you guys the better. Thanks again, I appreciate the great service ya'll provide for those of us that don't have a clue

Read other 4 answers
RELEVANCY SCORE 44.4

I have a Windows 7 32-bit workstation in a workgroup. For the past few weeks, our vulnerability management scanner has not been able to scan this particular machine. I added the registry value of LocalAccountTokenFilter to disable remote UAC to be able to
scan. I am able to manually scan after I make the change but if the machine reboots, or if I log out after making that change, everything reverts back to default.
This happens when I make any Local Security Policy change as well. If I make any changes to the UAC options, they are completely undone after I logoff my session or reboot. Has anyone seen this problem, and know a fix for it? Any help will be so appreciated!
Jasmin

Read other answers
RELEVANCY SCORE 44

Just purchased a new computer with the win 7 installed. I believe that this is the bottom version of the OS.
I read that you can increase the capability of the factory version by purchasing a "software key" that improves the OS.
My question is, how much does this cost ,and what other features come with that modification, and is it worth it for someone like me that basically spends most of my computer time on-line read blogs and news.

A:Win 7 modifications ??

If that's all you do with it and your happy, why go to the expense and the hassle,
stick with what you have in my opinion. But if you really want to change have a read here.

http://www.sevenforums.com/general-d...-ultimate.html

Read other 3 answers
RELEVANCY SCORE 43.6

Hi there,

So, i own a pc, a laptop and an xbox 360 and they are all connected to my home network via a router. now, when i have all three of these running at the same time it can cause a great deal of annoyance and confusion when we are all trying to compete for the most amount of bandwidth,

For example, my brother will be playing halo 2 and have msn open and i will be trying to surf the net on my laptop. now my brother will be complaing that he is not getting "host" and spends some of his games in red bar and my internet pages take a few minutes to load.

so i was wondering if there are any programs or freeware out there that i can go and buy so that i can modify it so that i can tell my router to give my xbox (lets say....) 60 percent of my bandwidth while splitting the other 40% between the two computers and then when the xbox is off it diverts the bandwidth to where it is needed most

If there is anything out there that can help me please post a name and/or link and it would be greatly appreciated.

Thank You
 

Read other answers
RELEVANCY SCORE 43.6

Hi, all. I'm trying to fix my sister's laptop. The laptop is a Dell Inspiron 1501 running Windows Vista and is stuck in a reboot loop. Windows repair doesn't work and restarts itself, as does all of the other options in F8. When I try to boot from the CD-ROM (Vista recovery disk), it starts the loop over again. The only change I can seem to get is a STOP message when I try to start debugging mode. The stop message is as follows:QUOTESTOP: c0000218 {Registry File Failure}The registry cannot load the hive (file):\SystemRoot\System32\Config\SOFTWAREor its log or alternate.It is corrupt, absent, or not writable.Collecting data for crash dump ...Initializing disk for crash dump ...Beginning dump of physical memory.Dumping physical memory to disk:Any help would be appreciated! She needs her PC for school and I'll be damned if the repair shop rips her off again.C

A:Vista Reboot Loop: STOP c0000218 {Registry File Failure}

with it continuing to reboot i reckon it could be memory related!!!try taking out one stick and see if it works then.

Read other 29 answers
RELEVANCY SCORE 43.2

For the past week, my Windows 10 phone (Nokia Lumia Icon) allows me to take a few pictures, then gets stuck "Saving". I can return to the home screen, do anything else, but if I return to the camera (hours or days later) it still
says "Saving". This reminds me of shooting rapidly with a different camera and filling the buffer, so I have to wait until it's clear. In this case, it never clears. I don't think I'm taking many pictures...as I've taken fare more in a shorter time
in the past.

Is there something I can do to fix the issue without rebooting each time?

My phone has over 7GB of storage available. I can switch to video mode, but it still has the camera overlay with that message, so I cannot record video. The phone does allow me to capture a screen shot with the active camera image...but that still shows
the rule of thirds grid and all icons and the "Saving" text.

Read other answers
RELEVANCY SCORE 42.8

There are Inspiron 5567-2655, 5567-2662, 5567-3195, 5567-3201 and 5567-3546 modifications in stores in my town. It says that they are all with i7 7500U, 8GB memory, 1TB HDD and have Radeon R7 M445. OS for all is Win10 Home. I thought that the difference is in the color, but there are three different laptop body coloring and five modifications.What are the differences between these modifications?

Read other answers
RELEVANCY SCORE 42.8

How can I modify the apps that are started during bootup? I used to use a Windows app but I have forgotten the program name. Can you help?

A:Startup folder modifications

What do you mean by modify?
You can use a program called Autoruns to control what programs start.

https://technet.microsoft.com/en-us/...rnals/bb963902

Read other 1 answers
RELEVANCY SCORE 42.8

Hi all, I've been hard at work in modifiying my watercooling unit, I know it is not such a good product, but after modifications it is amazing. Soon I will post some pictures if anyone is interested. Here is a list of what I've done:

1. Drained the system
2. Took it apart
3. Took out all stock fans, replaced with Antec Led Fans
4. Took out the restrictive stock tubing, replaced with Tygon 3/8
5. Ran leak test for 3 hours, at the beginning there was one leak, which I fixed with some tightening of c-clamp.
6. Modified front panel, placed another grill, as well as the back panel
7. Modified knob lightning

After all this, when I replaced the tubing, I immediately noticed that the flow meter was spinning much faster, and this effectively reduced my temperatures about 2-3 Celsius at load. Replacing the fans, with better airflow and quieter fans also brought the temps down 1-2 Celsius, also the use of Danger Den MCT-5 Coolant brought my temperatures down 2-3 Celsius as well.
In the end, I used to get a load temp of about 44 Celsius, now I only get about 37-38 Celsius. Quite pleased with the project and acheivement. If you guys want pictures, or illustrations of how I did this, just ask. I will post them later.
 

A:Kingwin AS-3000 Modifications

We would like to see a photo. Thanks for letting us know.
 

Read other 2 answers
RELEVANCY SCORE 42.8

I just noticed something cool with the new way google does searches, and just thought I would share it.When you click the text (search result summary) below the search result link:Advanced troubleshooting for "Stop 0x0000007B" errors in Windows XP <--------Search Result Link Dec 1, 2007 ... This step-by-step article describes how to troubleshoot "Stop 0x0000007B" error messages in Windows XP. This article describes issues that ...support.microsoft.com/kb/324103 - Cached - Similar <-----Search Result SummaryA preview of the website is generated prior to you actually visiting, so you can see the site before you visit it to see if its something you want to click on.This only works in Firefox from what I have seen.This is what I mean:It works in Internet Explorer 8, but not 7.

A:GOOGLE Search Modifications

Its been on for 2-3 days now. I have Chrome, Firefox and IE8 on my PC and it works on all of them.

Read other 6 answers
RELEVANCY SCORE 42.8

while trying to load zone alarm antispyware I keep getting an error that says "you do not have access to make the required system modifications". "Please rerun from an administrators account". I have clicked on "run as administor" and compatibility settings but that install error keeps popping up. other programs install fine.

A:system configuration modifications

Originally Posted by nickoli tessla


while trying to load zone alarm antispyware I keep getting an error that says "you do not have access to make the required system modifications". "Please rerun from an administrators account". I have clicked on "run as administor" and compatibility settings but that install error keeps popping up. other programs install fine.



Nickoli:

Welcome to the Vista Forums

Have you already installed zone alarm and are getting these errors or are you installing zone alarm and getting these errors?

Read other 11 answers
RELEVANCY SCORE 42.8

New to XP (media center sp2), not new to Windows OS. Are there any "out of the box" tweaks/modifications that are recommended? Any XP tweak guides? I am not a gamer, don't overclock...just want it stable and lean without all the unecessary background apps running and dont need all the superfluous software.

For example, do many with XP disable system restore? I did with my old OS as I have an external HD withh system backup images. Should I keep the "enable write caching on the disk" checked in the HD setting in the device manager? Is Corel Photo CCentter bundled with any other software? I have many other questions, but willl settle for feedback first.

Also, if anyone has recently purchased a Dell E510 (or other Dell) can you tell me all the trial ware that I can uninstall? I am afraid to get rid of too much because I fear its bundled into other apps that I need. I curse the OEMs for doing this.

Thanks for any advice or links

ERG
 

A:XP Tweaks/Settings//Modifications

I edited my signnature to show my specs. Thx
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hello,

I need to restrict the below items. Preferably through the registry. I would like the restrictions to only affect non-Admin accounts. Is there a way to do this? Thanks for any assistance.

Sam

This is a list of the items I'd like to change/restrict:

Remove the Control Panel, Printer, and Network Setting for the Classic Start Menu
Remove the Control Panel icon
Remove the Printers and Faxes icon
Remove the Help and Support icon
Prevent changes to Explorer?s Advanced registry settings.
Prevent access to the taskbar, command prompt, registry editor.
Prevent access to MMC utilities.
Prevent password changes
Remove CD and DVD burning features
Disable System Tools and other management programs
Internet Explorer
Prevent changes in IE registry settings
Prevent right-click in IE
Prevent printing
Disable AutoComplete
Remove Find Files

Read other answers
RELEVANCY SCORE 42.8

When you hover over applications open in the taskbar, is there a way of changing the view to "list" the open applications opposed to the default view that shows a picture of each item opened for that application?

A:TaskBar Hover Over Modifications

Hello meppwc, and welcome to Seven Forums.

The tutorial below can help you set to use taskbar list mode instead of taskbar thumbnail previews. Step 1 in Option One would be easiest for this.

Taskbar List or Thumbnail Previews Mode - Change

Read other 1 answers