Over 1 million tech questions and answers.

HP Chromebook 14 G4 - 2 models & FHD query?

Q: HP Chromebook 14 G4 - 2 models & FHD query?

I'm looking to purchase a Chromebook and one online store is listing 2 different models of the 14 G4 with the exact same description. I contacted them to query this but they did not know the difference. I'm not having any look finding the answer myself. Can someone help: The 2 models are: p5t61ea-abup5t65ea-abu My 2nd question, is the FHD (1920x1080) really avialable in the UK or is this like other brands that I've been looking at where their UK store pages talk about FHD when in reality this is only availble in American and here in the UK we end up stuck with 1366x768?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: HP Chromebook 14 G4 - 2 models & FHD query?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 68

I couldn't find a better place for this but I was hoping that you guys could help me. I'm looking to purchase this Chromebook but there's two models. I don't know the difference between the two models, I've looked at the specifications but they are exact. (Unless I'm overlooking something) P5T61EA & P5T65EA seem to have the exact same specifications with the only difference being a different product ID and one being slightly cheaper. http://www8.hp.com/uk/en/products/laptops/product-detail.html?oid=9740872 http://www8.hp.com/uk/en/products/laptops/product-detail.html?oid=9740875 Thanks! 

Read other answers
RELEVANCY SCORE 67.2

Does anyone have insight into what difference (if any), there is between these two models of the same Chromebook?  I've searched but I can only find that these two models have differing release dates by a few months.

Read other answers
RELEVANCY SCORE 47.2

NOTE: I could not post code because I must be really careful to protect proprietary information.

I work in an assembly plant and I've designed an Access 2003 program to deliver a set of 4 crucial parts to the floor all within a very narrow degree of tolerance. Further, the program integrates FIFO.

Ive done this by assigning each of the essential measurements codes and then running a series of queries:

Query 1 identifies the oldest Part A by sorting the available parts by the date they were inspected then by serial number (to break ties) and delivering the TOP 1.
Query 2 identifies the oldest Part B that is compatible with that Part A using the same method.
Query 3 identifies the oldest Part C that is compatible with that Part B.
Query 4 identifies the oldest Part D that is compatible with the other end of Part A. I have the parts in this order because we can begin assembly if we don't have a Part D on hand, but we must have Parts A, B, and C.
Finally, query 5 simply pulls the information from those queries into one location for a report.
As long as we have enough stock, life is good; but the moment a match cannot be made, it blows up. I cannot figure out how to make it go back to choose the next Part A. I need to figure out how and where to add code to each query to tell it that if no stock is compatible with the Part A produced by Query 1, to go back and pick the next one in line.

Can anyone help? Is the way I've gone about matching parts completely... Read more

A:Access 2003 – Query Based on Query – need code to rerun earlier query

Read other 11 answers
RELEVANCY SCORE 46

Hi there,

I'm very new to access and I hope I will get the simplest solution on my question below.

I have a table named "PurchaseOrder" and I'd want to create a query that will display the invoices that will due.

Eg:

Table1
PONo Customer Quantity SalesPrice InvoiceDueDate
3241 A 421 $12 17-Oct-2010
6589 B 521 $19 14-Oct-2010
2234 C 987 $32 15-Oct-2010
8697 D 888 $88 18-Oct-2010

I want to create 2 queries.

The first query will display all the invoices that will due 5 days before the exact due date.
Eg:
The invoice due date is 15-Oct-2010. The query will display information on 3241, 6589, and 2234.

For the second query, I want to display all the invoices that have exceeded the due date. The information on the respective invoices will be transfered from the query as mentioned earlier to the new query.

The scenario is as below:

Date: 16-Oct-2010

Query1

PONo Customer Quantity SalesPrice InvoiceDueDate
3241 A 421 $12 17-Oct-2010
8697 D 888 $88 18-Oct-2010

Query2

PONo Customer Quantity SalesPrice InvoiceDueDate
6589 B 521 $19 14-Oct-2010
2234 C 987 $32 15-Oct-2010
Date: 18-Oct-2010

Query2

PONo Customer Quantity SalesPrice InvoiceDueDate
8697 D 888 $88 18-Oct-2010

Query2

PONo Customer Quantity SalesPrice InvoiceDueDate
6589 B 521 $19 14-Oct-2010
2234 C 987 $32 15-Oct-2010
3241 A 421 $12 17-Oct-2010
Hope someone can help me with this. Really appreciate and hoping for ur help.

 

A:Query Access 2007 (how to transfer data from a query to another query)

The first query needs the following first Criteria Row of the InvoiceDueDate
between date() and date() + 5
The second query needs
< date()

I haven't tested it, just worked from memory. so let me know how it goes.
 

Read other 2 answers
RELEVANCY SCORE 40.8

Just got new Acer Chromebook 14, but am unable to make a recovery disc. When I run Chromebook Recovery Utility it says "Invalid Model Number". Is there another way to prepare a recovery disc? Thanks











Solved!
Go to Solution.

A:Just got Chromebook 14. Unable to run Chromebook R...

Hi all,
 
I just received word that it's available.On the Chrome Recovery app, I'm able to see that it is there.
 
Can you please try to access the recovery and let me know if you're still having trouble?
 
Thanks,Cory

Read other 11 answers
RELEVANCY SCORE 40.8

Just got new Acer Chromebook 14, but am unable to make a recovery disc. When I run Chromebook Recovery Utility it says "Invalid Model Number". Is there another way to prepare a recovery disc? Thanks

Read other answers
RELEVANCY SCORE 40

I have written a macro to make a table from data in an existing table. Then I use the data in the new table to select information in another table. That select query does not allow me to update the information in the 2nd table. It is like the records are locked. Even if I create a new table myself the select queries are locked but all my pre-existing queries work fine. Is there some type of setting I am missing that causes the information to be locked in select queries? I am thinking somehow the setting may have been changed. Any thoughts would be appreciated.
 

A:Solved: Access Make Table Query and Select Query

Read other 7 answers
RELEVANCY SCORE 40

I've got a lending table in which we lend items out, now they can be loan or permanent.

I can run a report with the query parameter on the ReqDate_Fld criteria Between [Report Start Date] And [Report End Date]

The report prints and counts everything borrowed.

Now I want to add more records to the report to include everything borrowed that was returned during that period specified by the criteria Paramenter set in the query. But using the Return Date (RetDate_Fld)

How can I select rows from the query based on the parameter date filled in when the query ran?
[Report Start Date] and [Report End Date].

I can build a separate report just for the returns using the current parameter but on the RetDate_Fld Between [Report Start Date] And [Report End Date] set by the query.

I've got it grouping at 3 levels to get it to break by Borrower, ReqID, and Request Date

Does this make any sense?
Thanks
 

A:Solved: Access query report query paramater use the param

You would have to have another group for whether or not the RetDate_Fld was filled in or not.
Add a new column to the query with the following Heading

RetDatefilled: iif(not isnull(RetDate_Fld), 2, 1)

That should place a 2 in the new column when there is a date and a 1 when there isn't.
You can now group on that data.
 

Read other 2 answers
RELEVANCY SCORE 38.8

I have a previously designed Access DB and there is a query that I am trying to understand. It has several tables that are queried more than once in a single query. First how do I determine the actual table name? I can only see the alias name. Also what is the purpose of using the same table twice in a query?
 

A:Solved: Access Query using tables more than once in same query

It is normally to do calculations or comparisons on prior or next records. It is the one weekness of Access Queries, the Totals function has some good arithmetic calculations like average, Count Sum etc but manipulating previous records like add or subtract values from the current record it can't do. So it requires more advanced SQl. Which is apperas you have.
Have you looked at the query in SQL view?
It should use the word "As" to designate the alias.
 

Read other 2 answers
RELEVANCY SCORE 38.8

Hi there,

Once again I need your help in Access. I'm trying to do a calculated field in a query that based on a query. For example, query B is based on query A. I want to add a calculated field called Totals in query B. The field totals does not exist in any of my tables.

Here is an example.

Totals: [Field1]+[Field2]+[Field3]

In the totals line I clicked on Expression. But the totals do not appear when I view my query. I get no errors on the formula. What at I doing wrong??

Mario
 

A:Calculated field in a query based on a query

Read other 7 answers
RELEVANCY SCORE 38.8

I have created a search engine for a data base using Access 2007
The Form Basically Runs a query of multiple fields and loads the result into a Combo box.
The problem is the data base is not fully complete and the records with blanks in some of their fields do not appear in the search results.
For example lets say I am looking for a People with the same surname and in my database is
Name Surname
Mike Norris
Chuck Norris
Norris
The query will not find the record only containing Norris
Here is the query I have used.
Like "*" & [Forms]![Entry]![txtSurname] & "*"

 

A:Query, Query Searching Blank Matches

Read other 8 answers
RELEVANCY SCORE 38.8

For a report I have a customer table, an invoice table and a revenue or payment table.

I need to produce a report that shows all the invoices created during a given month and year - that part is easy.

But then I also need to show the first payment given on that invoice. This is a situation where there is always a down payment made at the issuance of the invoice - but sometimes people will make more than one payment during a month.

Example:

I want the customer listed for each new invoice, the total amount of that invoice and what the inital payment on that invoice was: [CustomerID][Customer Name] [Invoice No][Total Invoice Amount] [Payment Amt]

So if there was an invoice issued for $100 and they paid 50 and 25 during the month it was issued and the balance on the next month, I still want to show it on this report as a $100 invoice with a $50 downpayment only.

(The tables are established and populated so it is too late to change the payment table to allow for a unique downpayment field. They all go in as payments.)

My problem is that if they made more than one payment during the month, the whole line with the customer name and invoice number shows up for each payment made. I only wnat the FIRST payment. I need a payment query that shows only the first payment in the month of invoice issuance.

Does that make sense?
 

A:SQL Query question for Access 2010 query

Yes it makes sense, I would create a pre-query that uses the Month & Year but is set to "Totals" and Date Minimum.
Then create the Report query using the pre-query linked to the new query's table via the InvoiceID this will limit both the month, year and minimum payment.
 

Read other 1 answers
RELEVANCY SCORE 38

Chrome and Firefox have the ability to see the box model highlighted on hover when you inspect the element. Is this possible in ie 10/11? It makes identifying problem elements infinitely easier, which is needed because, ya know, css3 compatibility (thanks
microsoft). 

Read other answers
RELEVANCY SCORE 38

Hello,
I am looking to buy a DVD-RW for my Dell 4700.

I am either looking at getting a Plextor, Lite-On, or BenQ drive. Can anyone suggest some good models from those manufacturers? Thanks
 

A:Models of DVD-RW

Read other 7 answers
RELEVANCY SCORE 37.6

Current Setup : We have 5 PC models in the field. I have a base image / drive for each model. Imaging done via hard drive cloner.
Solution wanted: I want to be able to have one base image / drive for all machines. The problem I keep running into is drivers. I want to have one drive that I can clone and pop it into any one of those 5 models and it will pick up the correct drivers and
work right out of the gate.
We have to update our image every so often and with having to update for 5 different PC's it becomes quite time consuming. Having one master drive would be much more efficient.
Any advice is appreciated. Thanks.

Read other answers
RELEVANCY SCORE 37.6

Most so-called Topseller models are not available anywhere. Why? Online vendors seem to have an abundance of only three P50 models, while one or two of a very few others trickle in sporadically, most not at all. Is this the way Lenovo releases these machines now? It used to be that models announced near the end of a calendar year would be stocked everywhere in great numbers by early spring, often at very good prices. Maybe having so many problems has held them back. 

Read other answers
RELEVANCY SCORE 37.6

which models have two hdd bays? (I mean 2 normal hdds and not a hdd and a ssd or swapping out the optical drive) I'm looking for a 17" screen model. thanks

Read other answers
RELEVANCY SCORE 37.6

We have three G50 laptops all very similar i3 processors memory etc and yet all three differ in so many ways, these were purchased for a charity run pre school so budgets are very tight and the laptops where aquired over and 18 month period i beleive. Because the school uses these laptops for producing the the personal reports on the children and these laptops are taken out of the school grounds we have had to ensure the drives are encrypted, so the extra cost of upgrading these to Win 10 Pro and enabling Bitlocker has been inversted. Each device was upgraded to Win 10 after there where purchased and odd things where noticed, one would not support the USB ports on bootup so the having the laptop on start with the USB pen drive with the key on would not work so a password had to be used in stead. Other two laptops suported the USB pen drives on boot up with the keys on them. All three devices have come in for a refresh build, first built fine, second will not support either USB or Password key so can longer encrypt the drive and the thrid freezes in mid build unless started in safe mode all three laptops are being re-imaged from the recovery drives on the laptops, 6 days wasted 1. why does one laptop not see the USB ports on boot up or even after the the OS has fully loaded unless the pen drive is unplugged and plugged back in.2. why does the third device keep freezing in mid build, seems like a drive problem system device driver issue but i cant would out ... Read more

Read other answers
RELEVANCY SCORE 37.6

i know this wouldn't be the best place to paste this but i hope you can help. I want to buy a new laptop with i3 but i learnt some have ultra low voltage 330um(1.2ghz) which gives low clock speed instead of 330M and others which give better clock speed(over 2ghz). Is the low voltage ones for mobiles only?

A:i3 models confusing

Look at this link. Apparently, the 330 UM and the 330 M are both mobile.

http://ark.intel.com/products/series/46469

They differ in clock speed, maximum TDP, acceptable memory, and graphics.

Read other 1 answers
RELEVANCY SCORE 37.6

My laptop (toshiba L550-117) died a couple of days ago after a long line of service. As a replacement my eye has fallen on a Satellite P50-C-17J for it's superb specs.
But, my supplier in the Netherlands told me that it is End of life and therefore no longer available. I believe that is the case for all the P50-C series.

When do the new models (P50-C) become available?
Or is there a suitable alternative maybe?

I can't find one that's not a P50-C series myzelf.

Maybe this is not the right place to ask for this, but I don't know where else.
Resume min. specs:
- Sixth generation Intel? Core? i7
- NVIDIA? GeForce? GTX? 950M
- 8gb memory expandable to 16gb
- ssd approximately 128gb + approximately 500gb hdd

A:When new models Satellite P50-C become available?

I think the P series is discontinued.
How about the L series or S series? The higher spec ones are similar.

Read other 1 answers
RELEVANCY SCORE 37.6

If I get a lenovo T61 with windows 7 32 bit can it can I upgrade to Windows 7 64 bit? Are all lenovo T61 think pads wireless? 

A:Are all T61 models equal

All T61 machines are 64 bit and can run a 64-bit OS.  There is no such thing as 32 bit -> 64-bit upgrade.  It needs a fresh install.  The same license is good for both, but you would need recovery disks.  T61 machines are not all the same:  14.1: tall-screen (4:3), 14.1" wide-screen and 15.4" wide screen.  There are difficulties in getting a fresh win 7 install working, related to system update.  Microsoft has not paid much attention to windows 7.

Read other 1 answers
RELEVANCY SCORE 37.6

Hello. I already know, that notebooks like: HP PAVILION 15-au024ur, HP PAVILION 15-au027ur, HP PAVILION 15-au028ur, HP PAVILION 17-g109ur, also 250/450 G4/5 sries are not self-upgradable due to there are no small cover with access to memory and store devices (hdd and/or ssd). Am I right?But any case - has anyone experience in upgrade of this notebooks? Maybe after warranty ends?Can I upgrade it with ssd? M.2 SSD or SSD instead of DVD drive? Can I receive an official answer or download an official document, that can say me - is there are an empty M.2 slot exists or not? For sure... Thx.

A:Upgrade new models with SSD

And that m.2 slot is enabled... read in other topic that it can exist but disabled.

Read other 1 answers
RELEVANCY SCORE 37.6

Hello everyone, I'm doing some research trying to find out: what other network models exist or have been in existence besides the OSI model and the TCP/IP protocol suite?
So far its been a confusing process because I've been mixing up articles on protocols themselves and the articles on the network models I'm looking for so far I've found:
X.25
Cisco's 3 Layered Model
Hierarchical internetworking model
Can you guys please help me get in the right direction by identifying the network models other than OSI and TCP/IP that you know of? Your help would be very much appreciated
 

Read other answers
RELEVANCY SCORE 37.6

...ookie crumbs?

Point 3. Clear out your temporary internet files and temp files.

What does this mean, is it....

Get rid of them?

Clean them of stuff?

What if there are things that i want to keep in these files, should i move them to a more permanant place?

orrrr, is this just a consequence i gotta put up with. Ok, so i lose lots of stuff i've saved (if there is lots, dont often check) but my computer will be clean and safe?

If there is something REALLY important in the temp file and clear means get rid of, is there a way of salvaging the contents that arnt bad?

A:Query ~ Instructions For Hijack This Log ~ Query

You should not have any files that you want to permanently save in Temporary Files. I have included directions for cleaning IE.
These instructions explain how to delete Temporary Internet Files. Microsoft Internet Explorer (IE) uses the Temporary Internet Files feature to store copies of Web content on the local hard drive. This feature improves network performance but can fill the hard drive with large amounts of unwanted data. IE allows many aspects of the Temporary Internet Files feature to be controlled, including the ability to delete temporary files as needed.
Difficulty: Easy
Time Required: < 1 minute
Here's How:

1. Open either Microsoft Internet Explorer or the Windows Control Panel.

2. In Microsoft Internet Explorer, open the Tools menu and choose the Internet Options... menu. In Control Panel. open the Internet Options list item. In either case, a new window titled "Internet Properties" appears.

3. In the Temporary Internet Files section of the Internet Properties window, click the "Delete Files..." button. A new "Delete Files" window appears.

4. In the "Delete Files" window, optionally check the "Delete all offline content" checkbox to also remove temporary files IE has saved for offline viewing. Click OK. A delay of up to several minutes may occur as IE proceeds to delete the temporary files it has cached. If the "Delete all offline content" checkbox is not checked, IE will not del... Read more

Read other 8 answers
RELEVANCY SCORE 37.6

hi there,

I have a large Access database and some of the queries are based on other queries (sql or other).

Now when I try and view the design mode of some of these queries, it takes an astonishingly long time as it appears that Access runs the child query contained before it allows the 'parent' query to show in design mode.

I can kind of see why it does it - but is there any other way of quickly viewing a query in design mode without Access first running the other queries it's based upon?

(NB: Someone said in the 'old days'(!) Access used to have this feature, but it is no longer there?!?!?!)

Thanks
 

A:Trying to look at design of query based on another query...

Bounce in case of new eyes to the forum!
 

Read other 1 answers
RELEVANCY SCORE 37.6

Hi Access bods.
Can anyone tell me how to do an expression to query from DATATABLE (the name of table), containing

ID: Auto ID key for the table
SITEID: There are multiple sites
ITEMID: Each site will have multiple Items
QUALITYID: This is set to either F, or is left blank
Id like to find the Percentage of Non-F, to each SITEID and ITEMID combo. I hope this makes sense.
 

A:Solved: Access Query, Query

Read other 6 answers
RELEVANCY SCORE 37.2

Which models of Thinkpad Yogas have USB-C?

A:Which models of Thinkpad Yogas have USB-C?

Good day.
 
ThinkPad Yogas: none that I know of.
The Yoga 900 and Yoga 900S, both do feature USB-C, though.
 
Regards.

Read other 1 answers
RELEVANCY SCORE 37.2

Hi,What laptop models have a TPM chip. Thanks,Cameron










Solved!
Go to Solution.

A:Laptop models with TPM Chip

Most ThinkPad models have TPM chip.  Is there a particular model or product line you are asking about?

Read other 9 answers
RELEVANCY SCORE 37.2

Hi folks

Would need your opinions on memory compatibility.

I have two sets of DDR3 memory. 2 x 4 Gb in each case. One set of Ares and one set of Ripjaws. Here is the link that compares the two. Except for the heat spreader, they look identical to me. Same manufacturer, same Cas latency, same timings. Only the model is different. Under the heat spreader, they must be identical chips.

https://www.newegg.ca/Product/Productcompare.aspx?CompareItemList=147|20-231-428^20-231-428,20-231-544^20-231-544

Right now, the Ripjaws are used. Ares still in the box.

My question is: Can I use both in my system (mobo: Gigabyte H97-D3H) without any problem for a total of 16 Gb insted of 8 Gb? I would not want to damage anything.

Thank you
 

A:Memory compatibility-Different models, same everything else.

This is a continuation of this thread - which was closed for some reason.
https://forums.techguy.org/threads/memory-can-i-mix-those.1169292/#post-9231407

The specs for both sets appear to be the same, so I don't see why they can't be used in a 16 GB(4 GB X 4) configuration.

---------------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 37.2

This seems to be a topic that is beating a dead horse, but I have yet to find a definite answer, so forgive me.I am currently on the market for a Yoga,  and it's come down to the Yoga Pro 2 vs the ThinkPad Yoga. I have found a model which seems to suit all my needs but I am unsure if it has a digitizer which supports the pen. From what I have read, it doesn't include the pen, but some sources say you can buy a pen and use it on the screen while others just do not mention it. The model in question is: S1 12.5" with the i5 and 500GB HDD and 16GB SDD. Model #  20CD00CHUS. Beyond this, is there an easy rule of thumb to see which TPY have the digitizer?Thanks, and sorry agan for the overly redundant question.













Solved!

Go to Solution.

A:Which TPY models have digitizer support?

Good day and welcome to the community.
 
Searching for that MT-M on the support site yields:
ThinkPad Yoga 20CD00CHUS
i5-4200U(2.6GHz), 4GB RAM, 500GB 7200rpm HD, 11.6in 1366x768 LCD, Wireless Option, Bluetooth, Intel HD Graphics, UltraNav, Secure Chip, 8c Li-Poly, Win8 Pro 64
 
IIRC, no 1366x768 LCD models were equipped with a digitizer. That was an option only with the FHD panels.
 
Looking at the PSREF: http://psref.lenovo.com/Product/91 bears this out. A quick scan of the table show the 1366x768 models as multitouch, but without digitizer pen support. The specific model above is down near the bottom of the listing.
 
Hope this helps.
Regards.

Read other 3 answers
RELEVANCY SCORE 37.2

i just upgraded to 8.1 and microsoft wants me to buy a license--thats ok--but then it shows the price as 289$

my question--what do i get for this? can I use this later on another pc? my current pc is old and i don't want to have to buy another license when i change pc's within 1 yea or less.

i can go buy an oem 8.1 software for about 140$ that i understand is only good for 1 pc.
any insight on how this works??

A:windows 8.1 pricing models

What did you upgrade from?

How did you manage to upgrade without buying a license beforehand?

If you were already running win 8.0 , there should be no charge, it is an update/service pack.

Read other 13 answers
RELEVANCY SCORE 37.2

Help!Last night I purchased the i7 HP Spectre from John Lewis:http://www.johnlewis.com/hp-spectre-x360-13-4129na-convertible-laptop-intel-core-i7-8gb-ram-512gb-ss...I was under the belief, due to pricing, that this was the same as PC Worlds i7:http://www.currys.co.uk/gbuk/computing/laptops/laptops/hp-spectre-x360-qhd-13-3-2-in-1-ash-silver-10...But I have now noticed different product codes, and of course I want the newest/best for the such similar prices:13-4172na (PC World)13-4129na (John Lewis)Can anyone work out the release dates or any other differentiation? Have been unable to work it out from the HP website etc. Need help asap as I may be cancelling my order... any help appreciated! 

A:HP Spectre - difference between models

HP's product coding is just not very transparent but it is very possible laptops with the same specs have multiple product numbers depending on distribution channel. I am sure John Lewis and PC World is each big enough to receive dedicated model numbers from HP. I have scoured the spec lists for you on both these laptops and as far as I can ascertain, they are identical: same processor, memory, solid state drive, wireless card, screen resolution. Functionally I can see no difference. 

Read other 3 answers
RELEVANCY SCORE 37.2

Hello,
i am choosing between these two models:
Dell Inspiron 7567 (I755810NDL-60B) and
Dell Inspiron 7567 (75i58H1G15-LBK)
The charactersitics of both on vendor sites are similar but 60-b model is mostly up to $40 cheeper.
What is the real difference between them and which one is more recommended?

Thanks in advance!

Read other answers
RELEVANCY SCORE 37.2

Hi,

I need to compile a list of all the PC's we have on the network and their make and model. I can get a list of the PC names from DHCP but can't seem to get the make and model. There are about 400 PC's. If anyone has any ideas it would be great appreciated.

Regards,
Ed
 

Read other answers
RELEVANCY SCORE 37.2

My laptop 310-15ISK 80SM01DXIH is a Dos Model, I have installed Windows 10 on it, why has Lenovo provided NOVO button on Dos Based Models, when there is not an option of installing One Key Recovery on such Models, isn't this button useless for me?

Read other answers
RELEVANCY SCORE 37.2

Hello, I work for an engineering company and I was wondering if anybody has any experience with NX. I saw a guy post something about catia so I assume somebody might be familiar with it. It is popular CAD software used by major engineering companies. Anyway, I am looking to design a customized feature for the program. However I am not quite sure how to approach it.
CAD models usually contain information or can be analyzed to produce information that can be used to make informed decisions by engineers. Information such as volume, surface area, weight, length, height etc. I am looking to design a simulator that can take CAD models and produce results and information based on the simulation.
I will give you an example; lets say I have a CAD model of Boeing 747, and I want to know how exactly how much speed it takes to create enough lift to get the plane off the run way in it's current condition. Now the models contain all the properties needed for the simulator to know how heavy that plane is, and how the weight is displaced among the structure (centers of gravity).
Now that was just an example, I am not running a simulator on a plane.
However my first thought is this:
CAD models (particularly in NX) are resource intensive, and unlike the render engine in your favorite game engine where occlusion culling takes place, in NX and CAD software in general the way it renders geometry isn't meant to save on your PC's resources. Even on a high end rig with the... Read more

Read other answers
RELEVANCY SCORE 37.2

Looking for a new notebook. Cannot easily tell from the usual descriptions which have a trackpoint pointing device. A list of models or model families would be very helpful.Thanks: Leon

A:Which new notebook models have trackpoint?

I am not sure any HP laptops still have a trackpoint. All Lenovo Thinkpads still have them. There is virtually no consumer demand for trackpoints, a huge majority prefers the touchpad. I still use the trackpoint on my Thinkpad, but also use the touchpad.

Read other 4 answers
RELEVANCY SCORE 37.2

Two reasons I have stuck with Netscape 4.7: The bookmarks are presented in multiple columns rather than
a single scrolling column as is the default for both 6.2 and 7.0. I have not found a way to change to multiple
columns.

Also, in 4.7 it is easy to include a hyperlink in one's e-mail messages as I like to do, to make it easy for
the recipient to just click on a web site I have discussed in the text. I have not found this capability in 6.2 or
7.0. I have perused the help files in both without success.

Are these two features not considered worthy of continuing - or is it just that I have not learned how to
expose them for my use?

Jack
 

A:Netscape late models

Read other 6 answers
RELEVANCY SCORE 37.2

What is the difference between the two models  Hp Spectre *360 13 - ac003na and ac004na ?  Do they have the same stylus? 

Read other answers
RELEVANCY SCORE 37.2

We have T460 and T13 machines together with T450, T460, T540, T550, T560 and we need to install Hotkey application so there is 8.86.11 (n1qvu92w.exe) for T460/T13 and 8.86.11 (n1qvu92e.exe) for the others. http://pcsupport.lenovo.com/be/en/products/LAPTOPS-AND-NETBOOKS/THINKPAD-T-SERIES-LAPTOPS/THINKPAD-T... http://pcsupport.lenovo.com/be/en/products/LAPTOPS-AND-NETBOOKS/THINKPAD-T-SERIES-LAPTOPS/THINKPAD-T... As the download link of the T570 is the latest will that be compatible with T460/T13 or is it still a separate install?

Read other answers
RELEVANCY SCORE 37.2

I am planning on purchasing an Acer Aspire R 14 laptop.  I specifically researched the R5-471T-52EE model (http://www.pcmag.com/article2/0,2817,2498473,00.asp).  On Acer's website I didn't find this particular model, but the following models all have the same specs: R5-471T-57RD (http://www.acer.com/ac/en/US/content/model/NX.G7WAA.011)R5-471T-58FW (http://www.acer.com/ac/en/US/content/model/NX.G7WAA.015)R5-471T-50UD (http://www.acer.com/ac/en/US/content/model/NX.G7WAA.008)R5-471T-51UN (http://www.acer.com/ac/en/US/content/model/NX.G7WAA.006) The only difference I found between each of these models is a slightly difference battery capacity. Can someone help me understand why there are 4 practically identical models of the same laptop, and if there are any significant differences I am missing? Thank you!

Read other answers
RELEVANCY SCORE 37.2

Hello,

Regarding a new 1 TB External HD.

There seem to be a zillion different reliability surveys out there.
You folks are the real experts, so let me ask here:

Is there any consensous as to which Brand and Model is considered "the best" regarding reliability for
an external 1 TB (or 1.5 TB perhaps) HD.

Really confusing knowing which to get.

My Seagate, with very minimal use, lasted only about 3 yrs.
Was only used for backing up, (once every week or two) and unplugged the rest of the time.
Quite disappointing.

Thanks,
Bob

A:HD: Reliability Of Different Brands/Models ?

Yep, I have had bad luck with the last 2 Seagates I have bought, one was a 2TB and the other 3TB. The 2TB lasted about 14 months, the 3TB (both only used as a backup) only lasted about 8 months, then fried itself, yet I have 2 WD 1TB that have lasted with no probs for 3-4 years, and 1 has games installed on it.

Next week I am buying 2 new HDD's both WD a 3TB & 4TB, then 2 weeks later a Samsung 120GB 850 Evo, for my windows drive as I only use about 75GB as it is, all my other stuff is on other drives.

Read other 3 answers
RELEVANCY SCORE 37.2

Hello, We are currently evaluating our enduser workstations options for the next 2 years.I am wondering how long we will be able to get Windwos 7 drivers for the new workstations?Till the end of the Microsoft extended support lifecycle or before? I have tried to find the info online but no success so far... I keep searching... Thanks in advance for your help.

Read other answers
RELEVANCY SCORE 37.2

What is the diffrence between 80TV01PWEDAnd 80TV00DNED

Read other answers
RELEVANCY SCORE 37.2

Howdy folks.

Does anyone know of a good method for this?

I work with a lot of .cgr files. (CATIA Graphic) It is my understanding that this is a triangulated surface representation of a modeled CatPart or CatProduct. I would really like to be able to export the shell into AutoCAD.

Right now, the way I go about this is exporting the cgr as a .wrl then opening that in Spacevision and converting it to a .spv file. This spv is similar to a cgr. With the spv(or wrl) open in Spacevision, we then take a screenshot of the model and import that into ACAD and manually trace the outline. This is a slow, tedious, and inaccurate process. But it's the best way we know of right now.

Another issue is that Spacevision has a limited size of wrl that it can open. When a cgr is converted to a wrl it gets much larger. A lot of the larger wrls (over 500MB) refuse to open in SV as it says it runs out of memory, even if the PC has 24 or 32 GB installed. The size issue wouldn't be that big of a deal of I could go about it another way.

We have a program that was written to convert a section cut in SV into a drawing in ACAD. It takes the hpgl file and plots it into a CAD drawing using a script. The program and script were written by my company. But I guess the programmes couldn't figure this out. Idk.

If anyone has experience with CATIA or Spacevision, or converting models from CATIA to AutoCAD. I'd love to discuss this. I can get from Solidworks to ACAD and I can get the wrl t... Read more

Read other answers