Over 1 million tech questions and answers.

Cant reinstall windows 10

Q: Cant reinstall windows 10

Something got corrupted with my windows operating system.system restore and repair dont work,the only way I can see to fix it is to reinstall windows but I dont have enough free hard drive space to do it.and I cant access windows to delete any files.indont have a second computer to try to take the hard drive out and use it as an external drive to delete files.any help is much appreciated.its a Asus notebook I believe.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Cant reinstall windows 10

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 41.2

Title says it all. My computer is very sick and I've received an error message today saying windows must be reinstalled, insert the reinstallation dvd. I don't have that disk anymore though I do still have the product key.

What should I do?
 

A:How do I reinstall windows 7 if I've lost the reinstall disk?

You may need to buy a new one. Do you have a recovery partition on your hard drive?

That is a very strange message, though. Are you sure you're not infected? Where and when did you see such a message?
 

Read other 1 answers
RELEVANCY SCORE 34.4

My son's laptop 'died' earlier this week. Screen just went blank. In the end, I decided to rebuild the drive.
After much difficulty, I managed to reinstall the OS (Windows 10) and all seemed well.
Oh, except the reinstall does not provide even WiFi drivers at a minumum - so after figuring that out I had to dig that up too on another computer and transfer/install. Problems over... I thought.
As the XPS went on its way to update drivers - the screen suddenly went blank (hello! haven't we met before?)... made some melodious beeps and chirps as though trying to communicate (it wasn't morse code) and now the computer continues to hum away (the fans?) with that.... black screen.
Before I wipe everything and re-install, again, and perhaps let the machine run with old drivers at the risk of malicious attacks etc (small price to pay for a 'working' computer I suppose), might anyone know of solutions to this problem?
With thanks in advance.
Signed,
Frustrated but Hopeful

A:Dell XPS 13 Black Screen - cause for OS reinstall - happened again after reinstall during driver updates

Hi ASHAROM,
What is the exact system model?
Is there any damage / liquid spillage on the system?
For the beeps, first we need to check if the HW is functional:
Restart the system and press f12 key on startup - choose diagnostics. Let it run the diags and if you encounter any errors - make a note of the complete error and report the same to us. These are onboard diagnostics and they might possible pick some error if the hardware is not functional. Also, run an extended / thorough tests on the HDD and memory to check for any possible errors. 
Drivers: If you are using a retail image of Win 10 OS, it will contain only the OS installation files, since the OS is generic. The hardware on each system would differ and hence, the drivers need to be reinstalled. If you are using a recovery image for your system, then it would contain the required drivers with the OS image.
Also, please click my DELL-username and write me a private message with the service tag and your Name for case records.
Let us know if you have any other queries.

Read other 1 answers
RELEVANCY SCORE 34

Found an ISO for Windows 7 Home Premium SP1, burnt it to a DVD and reinstalling windows 7 onto laptop.
I enter my product key but get the error in the headline above. I have my product ID and product key, what can I do to install windows 7 on my laptop

Read other answers
RELEVANCY SCORE 34

I have a Dell Inspiron laptop (c. 2009) that had Windows 7 Home Premium on it. A couple months ago, I did the free upgrade to Windows 10 after continually getting prompted by Windows. Big surprise, my computer is not compatible, and therefore I can't see
anything on the monitor without plugging it into the TV via a HDMI cable, the "Start" button at the bottom left corner doesn't work, etc. It would also not let me go back to Windows 7 within the 30 days period. The laptop works perfectly fine minus
Windows 10 have screwed it up.

After talking to Dell support, they said Windows 7 needed to be reinstalled via a DVD. My friend had an original, unopened Dell reinstallation DVD with Windows 7 Home Premium 64-bit. When I try to do the reinstall, I choose "look for updates,"
and when it is in the "Setup is copying temporary files" first part of the install, the Unexpected error message with error code 0X6 telling to restart install pops up. I have tried multiple times, and I continually get the same error message.

Please help!

Read other answers
RELEVANCY SCORE 34

the xp MC is corrupt and i cannot even get in it. i dont have the MC disk but i have a home edition disk. it is possible to install home edition with the media center product key?

A:reinstall windows media center with windows home edition disk

if those were vista version then it would be. in xp, that is not that easy.
if you just do a repair and restore the system files you might just be able to pull that off but i would not count on it.
if you are planning to do a reinstall and just use the MCE prod key, that won't work

Read other 2 answers
RELEVANCY SCORE 34

I have struggled for 5 days trying to repair my Windows XP and have finally given up and am now trying to do a clean install. I deleted the partition and did a full reformat. It started the installation but I get to the point in setup with 23 minutes left and then this error shows up....
Distributed Transaction Coordinator Setup Error

Sub-componet Distributed Transaction Coordinator raised an exception while processing the OC_COMPLETE_INSTALLATION setup message.

d:\nt\com\com1x\dtc\ntdtcsetup\src\csetuputil.cpp(line2725)
error code = 0x800703e7

Error performing inpage operation.
Failed to load the library 'C:\WINDOWS\System32\msdtctm.dll'.

"Click OK" (at bottom)

Do I just throw the whole thing out and buy a new computer? I am just so frustrated at this point.

Any help would be appreciated.
 

A:Can't reinstall Windows XP error loading library c:\windows\system32\msdtctm.dll

This is what I found at this link: make sure your cd doesn't have any smudge's, ie fingerprints, on it, This is not to say this is the problem, someone with more experience will have to work on this if the below does not help

http://support.microsoft.com/kb/914232

Error code 0x800703e7

This specific error occurs when there is a problem performing an inpage operation. This error typically occurs because of corruption of the disk.
 

Read other 1 answers
RELEVANCY SCORE 34

Hello there,  I have a Lenovo Thinkpad T430. I bought it used but in very good condition. Since it didn't come with a HHD installed so i had to buy a seperate HHD and install windows 7 by my own.* It did have the problem before, when i bought it first about a year ago, and i somehow managed to resolve the problem by help of some guys here in this same forum. But all my bad that i don't remember where was the solution.* Now i have decided to shift to SSD, and for that i bought a Samsung 128GB SSD and installed the same Windows 7, and this time i used the Lenovo's own software to detect and install all my drivers and here i come with the same problem again, this time my webcam also not coming up.Eventhough i have tried all my best from installing all the drivers avaialble in the lenovo site and also on the support pages but no help.* Some guys says its a hardware problem or a cable is not intact but i have checked both of them,1. The cable is intact i am sure,2. May be a hardware problem but why it happened before the same way and i resloved it without any hardware change.3. And What is the problem with my webcam?4. What am i missing, all the drivers and softwares are properly installed as per the device manager shows. * And i am sorry but this forum has no good helping enveroment, I am sure this isn't only my problem but since people don't get help from here therefore, they don't contact the forum. But i can't leave it as it is! So all you guys please prove... Read more

Read other answers
RELEVANCY SCORE 33.6

Ok, so a few days ago I was on my computer and it started running a little slow so I decided to restart. This is when all the trouble began... Following the reboot at the welcome screen i was greeted by several registry errors, and a message saying a backup copy of my registry had to be loaded. So I thought ok, why did this happen? So, I rebooted again to make sure every thing was still in check. After the second reboot(not sure if I can call it that) i didn't even get the welcome screen. Instead i got a quick flash of a BSOD stop error and that was it. So after overall reboots, I figured my computer had crashed and decided to do a clean install. I got my original cd free of scratches and formatted the hard drive completely. Then, when setup began to copy the files about 5 different files could not be copied. I tried to install windows AT-LEAST 10 times. I only got past the welcome screen twice and windows was completely crippled, even though it did manage to load. I tried reformatting, repairing the install, created a new partition and tried to install, and all have failed. The thing i find strange is that almost each time it would copy files some of the files would change. So, I am at a loss and don't know what to do or try next any help. I have a 40gb hd, 256 ram, pentium 4,Msi computer with an Aopen motherboard.

A:Windows xp had BSOD. tried to reinstall windows, but it wont install correctly!?

Pity you reformatted, sometimes that BSOD stop code gives a little insight to a problem. Could have referenced to a hardware fault and somewhat ruled out a few possibilities.
I've also had this problem with files not transfering and I just bought another CD and it worked. It happens with Server 2003 too. The CD just suddenly stops working and thats it.
You could try cleaning your CD\DVD drives laser, but thats a bit of long shot really. (didn't help in my case)

Read other 11 answers
RELEVANCY SCORE 33.6

So I recently bought a Lenovo desktop that came with windows 7 pre-installed - I guess I havn't logged on this computer for a couple of months so it was kind of a surprise for me when i turned it on 2 days ago and it all of a sudden said " This copy of windows is not genuine " ? I've only had the thing for 5-6 months... Did the windows 7 home prem already expire, or? It keeps asking me to "Activate windows now" since the "Activation period has expired" - It doesn't make any sense though because I never had this problem before... I tried contacting customer support but there's no phone number anywhere... apparently you have to download a program which finds your serial number for you then you can call, but the program won't download for me - it just says " Failed " - Does anyone know the customer support phone number? Or Does anyone know how to reinstall windows on a "Pre-installed system" ? Thanks

Read other answers
RELEVANCY SCORE 33.6

Hi I recently purchased a new Alienware m14x r2 which came with windows 8 single language, English pre installed. However I want to replace the hdd with a newer hybrid drive, can I create a recovery disk and reinstall the os on the new hdd? I have created 5 recovery DVDs. Please help

A:Windows 8 recovery disk, can I reinstall windows on new hybrid drive?

Need to rebuild os on the new hybrid

Read other 4 answers
RELEVANCY SCORE 33.6

... without affecting anything else in the OS?

I'd appreciate simple instructions for someone not too apt with tech issues.

Thank you kindly
 

A:Simple way to reinstall just the Windows Media Center in Windows 7 Home 64-bit . . .

Windows Media Center is part of Windows 7 Home Premium and should already be installed.

If your computer doesn't have it, it may have been uninstalled.

Go to Control Panel - Programs And Features

Select Turn Windows features on or off

When the Windows Features window appears, click the + in Media Features

Make sure Windows Media Center is selected, then click OK.

--------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hi, I have Lenovo T480 made for german market, german windows preinstalled.I would like to reinstall Windows, but I dont want to make same mistake like when I have reinstalled original windows on x260 and lost LENOVO boot logo. I dont speak about LENOVO logo during the BIOS startup, I speak about LENOVO windows boot logo.How to make this.Thanks

Read other answers
RELEVANCY SCORE 33.6

I reinstalled my operating system. All my other performance scores are the same except performance for Aero dropped from 6.7 to 5.7.

I downloaded the drivers for my computer model from Dell and installed them in the order Dell said to. Some of the drivers didn't install, so I moved on until I got to internet and from there I updated automatically. I'm guessing the ones that got skipped might have messed something up?

When I try to update automatically from Dell, these Intel drivers never work. It says they installed successfully but when I scan for updates again they always show up again:

Intel 8 Series Chipset Device Software Driver
Intel(R) Management Engine 9.0 Components Installer

(Intel 8 Series Chipset Device Software Driver also repeatedly shows up as an update on my other computer of the same model, so I don't think this is anything to worry about.)

When I tried to automatically update with an Intel update program, it could not automatically update; I believe it said it was because custom drivers were installed.

This is a new computer, so everything should be working. I'm just trying to get that score up to where it should be. Any suggestions would be greatly appreciated. Thank you.

A:Desktop performance for Windows Aero lower after Windows 7 reinstall

Hi Welcome to Sven Forums ... You are correct the Series 8 Chipset is a custom Driver ...
What is the Model Number of your Computer ? ...
Have you checked the Chipset Version that you have Installed ? ...
Does the Date correspond with the Version on the Dell Website ? ...

Read other 3 answers
RELEVANCY SCORE 33.2

Hello everyone,

First of all sorry if i write in the wrong topic i'm new on this forum. I have a problem with my Western DIgital Caviar green HDD. My problem is:

I had 2 partitions on my HDD, one for windows 7 and one for backup. I wanted to reinstall windows but keep the backup partition so i put in my install dvd and booted up from it. At the manage partitions point i think i saw 5 partitions:

The 100mb for windows files
The windows Partition
The Backup Partition
A 1megabyte partition
And a zero megabyte partition.

I deleted all the partitions except the backup. I made a new one for windows. I procceed with the installation and everything went good,until when the installer rebooted the system. And thats where's my problem. The bios detects the HDD and stops there.

Here's a pic of it:

It happend with me before with my 500gb hdd and thats why i bought this 1tb one but now i dont want to spend money again for that if i dont have to. Maybe i deleted a partition that was for the hdd to work propely? And if so is there anyway to reset that? If someone can help me please do it. I realy don't know what to do:S

A:My HDD stops at windows boot screen after trying to reinstall Windows

1) Try resetting your BIOS back to default.
Clear CMOS - 3 Ways To Clear the CMOS - Reset BIOS

2) Remove HD, boot up, boot down, refit HD boot up.

3) Check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
HD Diagnostic

4) As you have had problems before, it may be a bad HD Controller or PSU.

Read other 6 answers
RELEVANCY SCORE 33.2

I did a full install of Windows 10 yesterday and I did not keep any files or documents as I have them backed up on my external drive.  The problem I ran into was that my NVIDIA GeForce 6150SE nForce 430 has no updates for win 10 and does not display properly. My computer came with Windows 7 home premium installed  and I have the product key.  As I have installed the full verion on Windows 10, I cannot recover the computer to win 7.  I did not get a Windows 7 disc when I bought the computer so I need to know if I can download a copy of the Windows 7 Home Premium somewhere and use my current product key? When the computer was new I made a set of recovery discs and I still have those ... I don't know if they can help. Any help and/or advice would be very helpful.  A link to the download would help as well. Thanks in advace for your help.  Jim.











Solved!
View Solution.

A:Remove Windows 10 and Reinstall Windows 7 Home Premium

Yes those discs you made will reinstall W7, disc 1 is bootable, put it in the drive and restart the PC, when you see the Dell logo press ESC key a few times, then select your boot device (cd-dvd rom), it should now boot from disc 1 and start the recovery process, it is a lengthy process, so be patient and dont do anything unless instructed to, it will reboot on its own many many times, do not interrupt the process. When it is done with recovery there will be a screen to start setting up your user name and so forth.

Read other 4 answers
RELEVANCY SCORE 33.2

I am just getting to know my T580 and I have a question about the recovery environment. This is the tool that is accessed by pressing the F11 key in the Startup Interrupt Menu. I would like to know, in the event that everything else is destroyed (e.g. by filling all other pattitions with zeroes and then deleting the partitions), would the recovery environment reinstall Windows as it was when I took the ThinkPad out of the box ? If yes, how does it do this? Does the recovery partition contain everything necessary to do this, or are downloads and/or USB media required? Also, how does the firmware know where to find the recovery environment? I presume it boots the partition on the first disk that has the expected GUID (i.e. it has DE94BBA4-06D1-4D40-A16A-BFD50179D6AC). Is that right ? If so, then I would assume that I only need to back up that one partition (it's 1000M, with 451M used and 586M free), and would be able to repartition a new disk with one partition of the appropriate size and GUID, and restore the backup into it. Then reboot through the startup interrupt menu and press F11 to reinstall Windows. Do I have that correct ?

Read other answers
RELEVANCY SCORE 33.2

Bloatware Banished: Windows 10 Eliminates the Need to Ever Reinstall Windows on New PCs


Quote:




Geeks often immediately reinstall Windows on their new PCs to get a completely clean system. Thanks to a change in Windows 10, you can get a fresh copy of Windows on any PC without downloading an ISO file and reinstalling Windows.
Microsoft is changing the way Refresh and Reset works in Windows 10. Computer manufacturers won?t be able to pollute the recovery image with their own software and modifications. Manufacturer-provided software is stored separately.




Bloatware Banished: Windows 10 Eliminates the Need to Ever Reinstall Windows on New PCs

A:Bloatware Banished: Windows 10 Eliminates the Need to Ever Reinstall Windows

Like the article says, what if you want to retain a particular piece of that "bloatware" it currently doesn't give that option.
It also retains all Windows updates so that you don't have to download all over again after a refresh, but if an update is the issue, it will remain for the average user.

Read other 3 answers
RELEVANCY SCORE 33.2

Hallo,

I have two Acers computer. Just bought them one laptop one desktop...
Never got any windows 7 disks or accessoires with it. In the shop they told me this is normal acer. installation files are put on the harddrive. NICE ONE
BUT HOW CAN I FIND THEM?
WHAT IF I NEED TO REINSTALL OR REPAIR MY WINDOWS 7 COMPUTERS ?
HOW DO I TRIGGER THIS MENU?
Should i run the acer revory backup application to trigger these files from there?
Your help is greatly appreciated
Thank you very much

A:Reinstall windows or do repair without windows 7 cd with ACER computer

  
Quote: Originally Posted by broeckie27


Hallo,

I have two Acers computer. Just bought them one laptop one desktop...
Never got any windows 7 disks or accessoires with it. In the shop they told me this is normal acer. installation files are put on the harddrive. NICE ONE
BUT HOW CAN I FIND THEM?
WHAT IF I NEED TO REINSTALL OR REPAIR MY WINDOWS 7 COMPUTERS ?
HOW DO I TRIGGER THIS MENU?
Should i run the acer revory backup application to trigger these files from there?
Your help is greatly appreciated
Thank you very much



They are both right and wrong. Acer does not give out win 7 dvd's any more as part of their software reduction program. Instead they give a "restore" dvd which can be used to restore the factory settings if the restore partition is there.

They are usually in a separate partition (sometime D:\)
If you have the factory image on D:| you can use the dvd to trigger a "restore"

You first step should be to look/explore to see if the acer image and partition is there.
Ken

Read other 5 answers
RELEVANCY SCORE 33.2

hello, this is going to look very familiar because it almost the same problem everyone else is having, cept that i'm on a laptop.
well i have a problem on my 2 year old laptop. today i've been using my laptop all day and night, writing a psych paper. i was working downstairs and grew tired of it. so i turned off my computer and headed upstairs. once i got it plugged up again and turned on, a problem occurred. windows crashed and my computer restarted. this happened just as windows finished booting up. this is a constant loop. sometimes i catch a glimpse of a blue screen but it dissipates in a blink of an eye. so i decide i got a virus or something so i try to do a fresh reinstall with my xp install disk. my computer boots off the disk to windows setup. it tells me...
TO SET UP WINDOWS XP NOW, PRESS ENTER
TO REPAIR A WINDOWS XP INSTALLATION USING RECOVERY CONSOLE, PRESS R
TO QUIT SETUP WITHOUT INSTALLING WINDOWS XP, PRESS F3
so i press enter and it gets me to the point where it gives me the terms of agreement for installing a new windows. i press f8 to agree and it says loading dosnet.inf and that i need to insert a windows install disk. even though i have one in my drive. so i press f3 and restart. nothing..... so i go to windows recovery program. i mess around in there doing chkdsk getting the message
chkdsk found one or more errors on the volume
2092340kilobytes total disk space
515100 kilobytes total disk space
when i try to load regularly now it giv... Read more

A:ends windows loop + unable to reinstall windows

hard drive is a toshiba hdd2d38

Read other 3 answers
RELEVANCY SCORE 33.2

I want to reinstall windows 10 pro using a usb flash drive. My laptop is dual boot windows 10 pro and kali linux 2017.3 . Recently I reinstalled kali linux and faced some problem regarding partions and grub error and i don't know how it automatically solved after multiple formatting and creation of partion with restarting my laptop. I am afraid if i reinstall windows 10 pro after deleting its partition and then create new one then install windows again would face some grub issues for kali linux or for windows. Someone give the full guide on how to reinstall windows 10 pro in dual boot kali linux and windows 10 pro.
 

A:Reinstall of windows 10 in dual boot Windows 10 pro and kali

When you install Windows the boot will be set to boot to that Windows only (in your case; non-newer Windows installations could be included in general). So the outline of how to proceed is

a. decide how you will get back to the dual boot you want, and make preparations if needed.
b. install Windows.
c. restore the dual boot.

As I assume that you have a GPT disk and UEFI motherboard I cannot give any more details.
 

Read other 1 answers
RELEVANCY SCORE 33.2

Windows 10 upgrade began installing on my Windows 7 computer before I could stop the process. I had planned to have a dual boot system with Windows 7 and Windows 10, but I now have just Windows 10 installed.

If I downgrade back to Windows 7, can I reinstall the Windows 10 update (after preparing a new partition for it)?

Also since I've already activated Windows 10, do I still need to install it before July 29?

A:Can I reinstall Windows 10 for free if I roll back to Windows 7?

If you have previously installed Windows 10, and received a digital entitlement, then you can rollback to Windows 7, and reinstall Windows 10 later, even after the July free upgrade offer is over.

Read other 4 answers
RELEVANCY SCORE 33.2

So here's the story:
I was just getting some work done last night on my PC, when suddenly the power went out. After a while when the power came back on, my computer would not boot. It was stuck on the Windows loading screen. So I restarted and did diagnostic (pressed F9 before booting), turns out that everything is okay including CPU, memory and Hard Drive connection test.

So I restarted again and let the Windows load, it took 20 minutes. After which it started some disk checking (It looked like the Windows XP disk checking except it had a black background and it took 1.5 hours).

It showed that 8 files or indexes or something were unreadable. Then it restarted, and opened startup repair. Startup repair is apparently checking or disk errors which might take over an hour, but it has been over 5 hours now.

So I know that my Hard Drive is okay since it has been doing all that, but maybe the Windows files are corrupted.

I decided to re-install Windows but I want to keep my files. So I had to move all the files from the system drive to another one so I don't lose my files in the C drive. But I don't have another partition, I just have a 1.35 TB C Drive and I don't have any means of backing the files up on an external HDD.

So I was thinking if I could install Linux from a Disc, creating a partition with Linux, move all the files to that partition and then reinstall Windows from a CD.

Is it possible to do such a thing? If so what are the steps I should take to do i... Read more

A:How to make partitions to reinstall Windows when windows does not boot

Work through these steps to Clean Reinstall - Factory OEM Windows 7.

Best to back up your User folders externally to a HD, DVD, flash, or 7gb free in the cloud with each Windows LiVE ID on Skydrive.

Read other 9 answers
RELEVANCY SCORE 33.2

It started out as a small problem with malware then after running an malware program i could not log in into windows, id log in and then get instantly logged out, so I googled the problem and all solutions to the problem was to repair reinstall windows with the cd, which work but then i got another dang error which was error code: 0X80004005. Which means basically there is problem preventing Windows from accurately checking the license for this computer. So i googled that and got the solution to that (http://support.microsoft.com/kb/306081 [method 2]). I proceeded with the instructions till i got to the point where it instructs me to "Press 1 to access your primary drive installation with Recovery Console." which i attempt with no luck

Any help or suggestions WOULD BE GREATLY APPRECIATED!!!!!

A:WINDOWS CANNOT CHECK THE LICENSE AFTER WINDOWS REPAIR REINSTALL

That error message, and most other errror messages, can have many possible causes and interpretations.FWIW: http://social.microsoft.com/Forums/en-US/g...6-d3dedb727db1/Do you have XP installed, as I see that Vista frequently can generate an error with these numbers?KB referenced by you: http://support.microsoft.com/kb/306081<<...instructs me to "Press 1 to access your primary drive installation with Recovery Console." which i attempt with no luck>>Can you provide more detail as to exactly what happens after you entered the Recovery Console? Did you make the selection? If not, what happened to prevent such? Did you get to the password prompt line?Louis

Read other 2 answers
RELEVANCY SCORE 33.2

Hello.
I have an Acer Aspire 6920G, which has recently developed a KSOD. It could be related to AVG, since it was prompting me to restart for a while before I shut down the computer. However, after attempting several fixes, (including renaming all of AVGs folders and the driver) I decided to just reinstall windows. After backing up my files with a Linux live CD, I noticed a problem. On this laptop, you can only reinstall windows through D2D (Disc to Disc). In my carelessness, I failed to notice one of the attempted KSOD fixes had reverted the Acer MBR to the Windows MBR, stopping me from booting into the hidden D2D partition (and the windows recovery tools). I have no other way of reinstalling windows, so I thought I'd ask what I should do here. From what I see, I either have to restore the Acer MBR (which seems impossible without windows) fix the KSOD, then fix the MBR in windows, or figure out how to boot into the hidden D2D partition Any thoughts? Thanks.
Sol

A:Windows vista (32bit) KSOD/Can't reinstall windows

seeing as you are running a factory made machine, im guessing you don't have an actual vista installation disc. in that case, i would try and either bring it to a tech and see if they can do something or bring it back to acer. try installing a different AV once you get it back.

Read other 5 answers
RELEVANCY SCORE 33.2

Hey,

So I had a problem today in which Windows decided that it wouldn't boot, Instead it would just reboot constantly

This happened after I heard a ticking noise from my computer, things started to freeze, and so i had to restart. When I tried to turn it back on I had the above problem.

NOW, I tried to use Windows Repair option that is there by default. It loads up the blue windows background, gives me a pointer but then doesnt do anything.

I have a W7 repair disc, I booted to it. That too done the exact same thing, it lets me choose the language/keyboard style to use and then sits on the blue windows background and gives me no options.

Finally, I have a full W7 installation disc that I booted to. I tried the repair option and got the same problem as before.

I also clicked the "Install Now" button and it has been stuck on "setup is starting" for over 10 minutes now, with no hope of it doing anything.

So currently I cannot repair or install Windows. I assumed it was a harddrive failure, but why wont my disc based solutiions even work?

Any help would be great, thanks

A:Issues with Windows booting, Windows repair and trying to reinstall

Brumski some system specs mate please that ticking sound sounds like a hard drive to me but without any specs mate it is hard to tell you what to do.

System Info - See Your System Specs

Read other 9 answers
RELEVANCY SCORE 33.2

Windows 10 upgrade began installing on my Windows 7 computer before I could stop the process. I had planned to have a dual boot system with Windows 7 and Windows 10, but I now have just Windows 10 installed.

If I downgrade back to Windows 7, can I reinstall the Windows 10 update (after preparing a new partition for it)?

Also since I've already activated Windows 10, do I still need to install it before July 29?

Read other answers
RELEVANCY SCORE 33.2

The other day when my Win7 Home Premium desktop failed to boot into Windows, but only to the Repair Options screen, I had to decide between using my two-year old Windows System Image backup file or reinstall Win7 from my original retail DVD. I also decided that this was a good time to install a new, larger drive to use as C:, and let the original drive become D:. Although using the system image was recommended to me by a couple of people, I felt that a two-year old image on the new drive was too out of date, and so I opted to do a fresh install of Win7.

In fact, I found this reinstall to be a fairly painless operation... lengthy, with numerous updates (including SP1) and the subsequent machine restarts, but mostly just a case of clicking OK buttons. Other than an initial network driver to gain access to the Internet, all other drivers were downloaded and installed by Windows Update.

I had previously made a list of my two Program Files folders, so I knew what applications to install, as well as my Start Menu entries. With the exception of the operating system, all my applications are Open Source or freeware (such as Visual Studio Express) and readily available online. It was a good opportunity to "refresh" the entire system. ALthough I had recent backups, all my personal data files were still available on the old drive, and easily copied over to the new drive.

Since both options basically wipe whatever is on the drive, it got me wondering about the advantages, if ... Read more

A:Windows System Image Backup vs. Windows Reinstall.

Most people that use Backup Imaging create an image periodically.
How often is a personal choice.
For me a monthly "OS" backup is usually enough, for the Patch Tuesday cycle.
If I want to try out a new program I usually create a Backup Image so I can quickly back it out if it causes problems.

Read other 3 answers
RELEVANCY SCORE 33.2

ok, this is strange.. I reinstall Windows XP Home because My computer was messed up. It deleted all my files.. so on my desktop screen I don't have any Program Files Icons BUT it still save my Files!!! I have my orginial files in my Documents folders and In my Program Files It has all the Programs and files that go with that program???
How do I zap everything back on my desktop screen so I don't have to go Download each files as new again??? And I how do i get my Internet Favorite Links and my Notepad with my saved information in it??

Thank you!!

ps. Yes I did try the "Start" and then program files and none of the programs are there.. BUT yet it is in my Program Hard drive C: Program files... with the Program and all it's content???
 

A:Reinstall XP Home How do I reinstall all my Program Files I Have?

You installed a new version of XP in the same folder as your old one instead of repairing the one that was there already. Your programs are there, but not "installed". You need to reinstall all the programs to create their registry entries and shortcuts.

You probably have 2 "Windows" folders, too, with different names. Go to Start > Run, and type:

%windir%

to see which one you are using now and delete the other one.
 

Read other 1 answers
RELEVANCY SCORE 33.2

i've decided to go ahead and reinstall w8pro given my extensive messing around with it has finally caused some quirky, unexpected results - it's a relatively new installation, so it shouldn't be too much of a hassle, didn't get a chance to install a lot of third party programs and such. the thing is, i did purchase and install the w8 media center pack - how do i go about getting this back? do i have to contact ms? i'm fairly certain that i don't have an activation number for the pack, if i recall i just paid for it online and then was allowed to download it and install it.

also, i thought i would go ahead and do a clean install all over again as opposed to a reset or refresh given i want to make certain that i'm starting from scratch again... or do you think a reset or refresh might be the better option (i'm not concerned about keeping any personal settings or files intact). any advice would be appreciated.

A:W8 Media Center Pack - Reinstall After W8 Reinstall?

They will have given you a Product Key for it - Just reinstall Windows 8 and then get Media Center again using the same Product Key, it's yours now. After you install it, the Media Center Key will be your new OS key.

Read other 9 answers
RELEVANCY SCORE 33.2

I bought Office 2016 months ago, but due to windows update failure I had to reinstall win10 thereby losing Office 2016.
Can someone point me to a contact? I bought Office 2010 online from MS. TIA

A:how to reinstall Office 2016 after win10 reinstall?

If you bought online there should be a record of this and you will be able to download Office again. Try this link http://www.office.com/myaccount

Read other 0 answers
RELEVANCY SCORE 33.2

I wanted to convert my Sony Vaio back to Windows 7 after updating to Windows 8 last year. I tried using the recovery disks that I created when I got the laptop. It told me that I couldn't reinstall. So after trying multiple things, I finally decided to wipe out the entire hard drive thinking that it would automatically reinstall Windows 7 64 bit. Now when I try to reinstall, it can't find a drive to install it to and all I have is a black screen now telling me Operating System Not Found....please help so that I can reinstall Windows 7 64 bit on my Sony Vaio VPCCW21FX with a 500 GB SATA Hard drive and 6 GBs of RAM.

I'm thinking I may need to create a partition so that when I put the recovery DVD in to reinstall Windows, it has a drive to install the software onto. I don't know how to create a partition or if that will solve my issue. My laptop is now worthless. Also, I can't access BIOS. I completely erased the entire hard disk.

A:Erased hard drive to reinstall Win 7 but now won't reinstall

Jim depends on how you set the wipe up and how you formated it mate look at this and if you have access to another machine do it.
If the drive is wiped clean then follow this it says for SSD's but will also work on spinners
SSD Alignment

Read other 6 answers
RELEVANCY SCORE 32.8

I have done quite the bit of reading in these posts trying to find some sort of help. Here's my problem: Last fall my pc was rebuilt with a new HD (WD) and new OS. It lasted for only a bit of time, then went down again. SO I let it sit for a bit and in APril I bought a refurbished mobo. I installed it and didn't have much of a problem. Until a few weeks later, I received the BLUS SCREEN OF DEATH!! I was able to get the pc back and running, for a bit...then it happened again.....and again, was able to get it running. This happened a few times.... But I was always able to "fix it" until last night...I couldn't! Luckily throughout all this I backed everything up! So I reinstalled the HD and bought new a OS to install it. However, now it just keep going from teh windows page to the Dell page. And it keeps trying to restart the setup. Even though it was gone through the steps already! After the money I have spent thus far, I cannot afford to send it to a repair shop. I am unsure as to what to do next. I think it may be a memory problem???? Any ideas......

Anxiously waiting!!
 

A:Cannot reinstall Windows XP

After your mobo install, you mention "getting it working" again. Could you say what you did in order to get it going again? That would be a clue. Is the install of Windows unfinished? Is it going back to do the "setup" part of the installation, instead of finishing like it should? I'm sorry for so many questions but I don't have a clear picture of what's happening completely. If you post back I will answer and help you out (if I can). Good Luck.
 

Read other 2 answers
RELEVANCY SCORE 32.8

during a re installation of windows xp sp2 at the 34 minute mark i get a bsod, the trial period for my avast was up and i was planning on registering for it the next day, but while i was at work my girl downloaded some game and shortly after wards the computer could no longer access the internet. on the premise that it was a virus i decided to try a reinstall, and at the 34 min mark i get the blue screen, since it was at device portion of the installation i thought it might just then be the integrated nic, but i still get the bsod even after disabling it

A:windows xp sp2 reinstall

Hi Johnathanblaze, welcome to TSF

A stall at 34 minutes usually identifies a hardrware issue, as Windows cannot load the device drivers for it on install. Usually, this is a high spec video card, such as 128mb.

Run the install using basic spec, the on board stuff if possible, and then install the hardware when Windows is fully loaded.

Read other 5 answers
RELEVANCY SCORE 32.8

My PC came with Windows XP installed. I didn't get a Windows XP CD with it. Instead, a system restore program is installed in the D drive which is a partition on my hard drive. If my hard drive dies, what do I need to do to reinstall Windows XP on a new hard drive?

Thank you.

A:How do I reinstall Windows XP?

Either get a new CD, not advisable because there will be a fee involved.

You could always try to contact the manufacturer of your PC and ask their advice, they will most probably send you a new CD.

Read other 3 answers
RELEVANCY SCORE 32.8

Hi everyone!
I have an SSD drive used by an old windows installation and i'd like to reuse it.
In the old operating system TRIM wasn't enabled but the drive supports it.
I'd like to know if I simply install Windows 10 Pro on that wiping all partitions and (automatically) enabling TRIM all leftovers left by the old installation will be removed running TRIM command or it will detect and delete only the deleted files (sorr for the word-joke ) AFTER TRIM is enabled and therefore slowing the drive and wearing it out?
I'd just like to know if the TRIM command is retroactive.
Thanks in advance,
cheers!
 

A:Reinstall Windows on a used SSD

Ensure that the partition which contains the previous installation is properly formatted, before you begin the new installation.

As for trimming the drive, Windows should perform that automatically.
If you ever want to do a manual trim of your SSD, you may use the Optimize Drives feature which is built into Windows.
 

Read other 1 answers
RELEVANCY SCORE 32.8

Hi. First, thank you for taking the time to read my thread.
I've searched Google and visited the forum here many times and found solutions in the past.

Unfortunately, after trying to add a new Graphics card I became overwhelmed with a sudden barrage of system errors. Now I only want to reformat and reinstall my windows from scratch.

Now my problem is when I boot from OEM DVD, my system appears to load the system files fine but afterward there is no Menu options to reformat/Install/fix etc. I read that some people get a black screen at this point but I at least get the aurora background. Just no Menu.


System Specs:
Vista Home Premium 64bit
M2A-VM Motherboard
AMD Athlon x2 dual core 2.6Ghz +5200
4Gb DDR2 Corsair dual channel
500Gb SATA

A:Cannot reinstall windows

Try booting Partition Wizard - free d/l of .iso from here.

Partition Wizard Bootable CD allows user to boot computer directly to manage partition.

See what it says about the partitions.

Read other 2 answers
RELEVANCY SCORE 32.8

I'm currently running the windows 10 preview and just retired a 1TB drive from another computers Storage pool. Would it be possible to reinstall windows 10 on that drive since the drive that it is currently installed on is 500GB and still keep all my settings and programs etc? If so, how would I go about doing that? Thank you

A:Windows 10 reinstall

YES, you can use Windows back up & restore to the 1tb drive.

You will need to use the Windows system image, as the Bootable Recovery CD/DVD/USB will boot with Secure Boot

System Image - Create in Windows 8

Recovery Drive - Create with USB Flash Drive in Windows 8

System Repair Disc - Create in Windows 8

Backup - Restore Files and Folders from in Windows 8

System Image Recovery - Restore Image on Computer in Windows 8

The tutorials are for Windows 8/8.1, Windows 10 back up the same.

Read other 4 answers
RELEVANCY SCORE 32.8

hey guys
obviously, if i don't save my files, everything i have will be gone.. is there a way to save EVERYTHING (ie files, settings etc...) without having to use up like 15 empty CDs and without having to reinstall each and every program, then update etc?..
in other words, how can i format my pc without having to go through the tideous work of copying everything back from cd's and reinstalling then updating programs etc?
thanks
ghady

A:i need to reinstall windows.....

Try checking out Norton Ghost

Read other 6 answers
RELEVANCY SCORE 32.8

Question if I put my recovery cd that does not have drivers on it for Windows 7 do I need to load the drivers first before I do that or can I do that after the fact? I just tried using the command prompt to get to my recovery partition but that isn?t working. Any suggestions will be greatly appreciated. Thank you all.
 

Read other answers
RELEVANCY SCORE 32.8

Have a Toshiba laptop A55 S1064 which I needed to restore. Computer would not read restore DVD that came with the computer.

Was able to restore from Drive Q (partioned drive) and now I have a "Missing operating system" error.

Another error message is: Invalid media type reading drive C

I read in older posts that the laptop will read the CD if I change the BIOS to remove spaces but I can't seem to access BIOS. I read somewhere online that what I need to do is press the Esc key followed by F1 but that doesn't get me there. I can find reference to "CD-ROM = Secondary IDE(170H/IRQ15)" but nothing referencing the drive so I can get rid of spaces. My CD-ROM drive has played DVD's fine in the past so why now is it telling me the restore DVD is invalid?

HELP!!
 

A:Need to reinstall Windows XP

Read other 7 answers
RELEVANCY SCORE 32.8

I assume the copy of Windows will work if you had to wipe the drive and reinstall it? I haven't seen anything in the FAQ

A:Able to reinstall Windows 10

Someone said somewhere that when you upgrade you get a key and you can download the ISO and use the key if you need to do a re-install.

Read other 11 answers
RELEVANCY SCORE 32.8

My hard drive on my old computer fried. I had Windows 98 and purchased the upgrade Windows XP about 6 months ago. Is it true that the Windows XP upgrade I purchased is just a throw away?
From what I understand, I can't put it on my new computer that is now running windows 98. I have the same IP for registering and everything.
Thanks for all the help!
 

A:Windows XP Reinstall

Read other 11 answers
RELEVANCY SCORE 32.8

I am not a computer expert. I need help!
Every time I need to redo my system, I totally reformat my hard drive, re-install the OS and then re-install all my software. Maybe this is the only way to do it but is there a way to re-install my OS (Win 7 Pro) and not have to reinstall the software? In other words, I guess I am talking about a partition for the OS and the rest for the software? If this is possible, then by only installing the OS, how will my programs show back up? Maybe I am not getting the picture but someone told me this can be done, thus saving me much time.
 

A:Reinstall of Windows

Read other 8 answers
RELEVANCY SCORE 32.8

hard drive crashed purchased new hard drive from local computer store. after loading recovery disc window comes up windows setup could not configure windows to run on this computer hardware.i have a compac cq60 laptop do i need to purchase the same harddrive that came with computer?

A:trying to reinstall windows

Is the old drive usable at all? If so can you boot it in safemode? If so then go into adminiastative tools and click Computer management, system tools. Look at the Event Viewer Error logs and see if there is anything listed and see what the errors say if there are anything. Replacing the hard drive wouldn't cause this issue and could be a failing componet in the pc such as memory or video.

Read other 1 answers
RELEVANCY SCORE 32.8

Hey ,
I have a PC with an average build of 1 GB RAM and a 128 mb AGP graphics card. I wanted to upgrade the graphics memory but the AGP cards that we get here, are of a maximum of 256 mb which is not sufficient for my needs. So I thought going in to change the motherboard is a better idea, but just wanted to know if I have to reinstall the OS if I do change the motherboard. This is a bit of a hassle having to backup data, format the disk and then installing the OS. Is there a way I can change the motherboard without having to reinstall all the stuff ?

A:Reinstall Windows ?

FWIW:Changing a Motherboard or Moving Hard Drive - http://www.michaelstevenstech.com/moving_xp.html Intel? Application Accelerator - Moving a Hard Drive to a New Motherboard - http://www.intel.com/support/chipsets/iaa/sb/cs-009290.htm Louis

Read other 2 answers