Over 1 million tech questions and answers.

MS Access: Multiple copies of pages within a Report

Q: MS Access: Multiple copies of pages within a Report


This thread touched on what I'd like to do but went into a different direction:

I am so close on completing my system except for one nagging problem. I would like to generate labels for our shipping boxes. If Customer wants one of Product A, I can do that. If Customer wants ten of Product A, I could make ten copies. If Customer wants ten of Product A and ten of Product B, the report (shipping label) is all ready to go as two pages, and I'd make ten copies. The problem is, let's say Customer wants ten of Product A and 5 of Product B. I haven't been able to figure this out yet.

The number of labels I would need to create is in the query used to generate the report, field "Quantity." The shipping form calls up the report, which pulls the data from the query. As an example, I've got a report that is complete for each of the seven products to be shipped, but the report shows only one label per product, as I can't figure out where to apply the "Quantity" field to replicate things.

I'm not a VBA programmer but I feel I understand enough to where I could figure out where things should go. From the earlier thread the notion that there's a way to apply a counter drawing from the query gives me hope in solving my problem. I feel like I have a six pack of ideas and I just need the thingy to hold the whole thing together. Help is much appreciated, thanks in advance.

Read other answers
Preferred Solution: MS Access: Multiple copies of pages within a Report

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


Using XP and Winfax Pro 10.02

Recently, winfax has been sending multiple copies of page one (6 or 7 copies) and none of pages 2 and 3, but only to some fax numbers. When I contact symantec, tech support says that I must be intentionally or mistakenly sending this. (The suggestion is ridiculous. I tell winfax to send a 3-page document one time, or a 1-page document one time.) Did some searching on the internet and found that as far back as 1998, symantec was aware of this problem. The suggested solution does not make sense now. (In 1998, winfax was version 7 or 8.)

Has anyone else had this type of problem and was able to cure it?

I tried uninstalling and re-installing Winfax, but the problem persists. I tried deleting winfax as a printer and then resetting winfax as a printer, but the problem persists.

Tried using Mighty Fax, as a substitute, but Mighty Fax does not have most of the features I need.

I need help. I send 20-30 faxes per day.

Read other answers

I created a report in Access 2000. It automatically calculates info from a table that I have. For some reason when I print it out it makes 15 copies. The report is only one page and in the navigation at the report it shows only one page. I did notice that when I set up the text boxes for the report it had a section called "Hide Duplicates", I set these to NO. If they were on "yes" then the text boxes would repeat. Not sure if there is something I am missing.

A:Access 2000 report and 15 copies

Read other 9 answers

I have been working on a particular Access database for about two years, and it has been what I needed, however in October I ventured off to change the way the way I had to 'jump through hoops' to get a final report printed. I posted my delimma and OBP worked me through the "MAJORS" of my issues. My LAST issue with this report is this: there are blank pages printing between the 4 subreports that I have inserted. Everything else works perfectly, but I have tried over and over agin to do what I have read in the "MS Access help menu" to no avail. Can someone PLEASE help me? I know the answer will be a simple matter, but I just can not figure out what is wrong.

Thanks in advance

A:Blank Pages Printing in Access Report

Read other 10 answers

Just a general question regarding how best to approach the task of displaying info on an Access report.
Basically, what I need is to have a report that is made up of sections, where each section is based on the same query, but populated with different filters.

These sections are divided into 3 columns (AM, PM, NIGHT) and about 8 small sections per column (let's call them A to H). Each sections shows the same few fields of info, and none will have a massive number of records.
I was thinking of just using 3 sub-reports (one for each column) and simply ordering the records for each using a parent category.
However, I need them to line up horizontally, so Section B for AM would begin at the same vertical position as Section B for PM and Section B for NIGHT, directly after the longest Section A, and so on. Its probably easiest explained in a diagram, so check the attached, and imagine each box is full of data, you'll see what I mean.

The only other way I can think to do it, is to make 1 report out of 24 subreports, one for each section. Then I can guarantee the sections will be aligned correctly.

Cheers for any input...

A:Access report multiple filtered subreports

Hello again.

You can probably turn off the "Can Grow" property of the groups for each report to fix the height, but that means if you then get extra records you would have to manually re-adjust them.

Read other 1 answers

I have multiple different MTD Queries for statistic reasoning. In these queries I convert the date into the format to mmmm/yyyy and have the criteria for the user to enter the month/year

Doing this when I create my reports (using subreports) I am getting multiple parameter value popups. I am looking for a way to have the parameter value popup once either with changing my queries or adding a module any ideas would help Thank you

A:Solved: Access criteria multiple queries into one report

Read other 14 answers

I have 3 queries that are run by entering a date range. I would like all three queries to be on a single report. I believe it is the date range that is stopping my report.
Can you help me?

A:Creating A report multiple queries in access 2003

Read other 16 answers

I have a report that opens based on a combo box. The combo box is based on a query and is limited to the list. Basically you select the estimator's name in the text box and press a button to open the report with the related data. Here is the code I am using:

DoCmd.OpenReport "CloseOutRep", acViewPreview, , "[Estimator]= '" & Me.txtEstimator & "'"

The user wants to narrow the reports down by adding two more combo boxes - txtLocation and txtYear. How can I open this report with the additional criteria of

"[Location]= '" & Me.txtLocation & "'"
"[SalesYear]= '" & Me.txtSales & "'"

I guess any criteria would have to be true for the report to display data, which shouldn't be a problem because of limiting the selections to the list in the combo box.

So if this is possible all I will need is a way to make Access assume all records should be displayed when one criterion or another is not chosen.

Any ideas?
Building the Ultimate site list for PC support.

A:(Solved) Open a report in Access base on multiple criteria?

Read other 9 answers

Hey Guys,

I running windows 98 on a Gateway desktop with a HP Laser Jet 6L Printer, Here's my situation:

I can't figure this one out. I had to print out about 40 pages of a 2
page document in Word. I go under file/print/change the number of
copies to 40. What happens is, the printer is only printing 1 copy of
each page and isn't recognizing that I want 40 copies. So if I have a 2
page document, or a 3 page document, I get all the pages but not any
additional copies. (What is strange is that the printer window icon
shows the printer assigned to print 40 copies, but if it's only a 2 page
document the printer just stops after 2 pages) Nothing else unusual with
the printer itself and so far I just noticed it today and seems to be
only related to Word. Note that if I print Multiple pages of SINGLE page docs, everything is fine. I don't know what could be wrong.


A:Can't Print Multiple Copies of Multiple Page Documents on HP Laser Jet 6L

Which driver are you using? HP installs 3 different ones for the 6L and the PCL one doesn't always work right. Could be a memory or spool setting as well.

Read other 2 answers

While trying to delete multiple files from Word, I am clicking to highlight all the files. After a while, I am seeing copies being made of those files -- and then copies of copies, copies of copies of copies, etc. The files are multiplying like rabbits -- even as I try to delete them. Any thoughts?

A:Multiple copies of copies

Read other 6 answers

I'm looking at someone's machine and seeing files (for example vcmui.exe) duplicate many - many times with a numeric extension such as .001, .002 etc. Has anyone seen this one as a failed install - or more likely a particular virus?

A:multiple copies ?

Well run a virus scan on it:

Could these be files that were created by a file splitter program like File Shredder? It creates files with numeric extensions like you gave.

Read other 3 answers

I have Ms Outlook 2003. Recently I've noticed that when i receive my email, i've been getting 3 copies of 1 email.

How can I get only 1 copy of each email.


A:Multiple copies

Is this every email, or just those with attachments?

Read other 2 answers

I used to open 3 and 4 browsers and search in each copy. But I have had this feature work, not work, work again.

Since I put in a router to network 2 PCs for DSL access, again, I can only run 1 copy of the browser again. The second browser opens but addresses only change the original browser window.

When I open a copy and put in an address, then hit enter--that browser copy is unchanged, but the original browser changes !This is the information I wanted to keep for comparison with another site in the second browser.
Once in a while this works successfully and changes take effect in the second window. Is it because one window is minimized? Doesn't seem to be that. I tried WORKING with the original browser window but while that activity may prevent it from being changed, the browser copy doesn't change to the desired site, either, most of the time.

Maybe it is a particular kind of activity that keeps the original browser from changing--not just scrolling, clicking, but typing that is necessary.

I just succeeded in doing this while this window was open--after several tries I went to google and searched. Why did it work this time?

Any ideas?


A:Can't run multiple copies of I.E. Cause?

Read other 7 answers


Read other answers

Dears,I have designed a database with many reports of certain importance. basically a report in my DB is one of two types; a Daily Report (requires a single criteria which is the date) and the second is a History report. To view or print a report, I have designed a Filter form to fill in with the report criteria and clicking a button to open the report.The first type (Daily R) work fine without problems. The second type (History R)has a problem. In this report, the criteria are two or three because a history report will retrieve data within a period, so I have to input (FromDate) and (ToDate)and may be adding another criteria which is called a company.In all history reports, the report header will accomodate the two input values of date and extract the rest of report items into the reprot detail area.The problem is, the desigened system doesnot respond well as expected. When I load the filter form to fill in criteria for a history report, I have input the FromDate and ToDate and selected the third criteria (if any), then, the reprot opens without data in it.on the other hand, I tried to load the report directly form opening it, inputing criteria, and it has worked fine without probelms.Would someone expect a key reason for this problem or dirtecly can solve this problem?Appreciate youtr support.Thanks in Advance.mhegazy

A:Solved: MS Access report load from a form having report criteria

Read other 16 answers

I am unable to print multiple copies in the newsletter and the calendar sections. Help!

A:printing multiple copies

In your printer dialogue box, there should be an option for multiple copies.

Could you please give more information such as type of printer and what programs are being used when attempting this?

Read other 1 answers

Hi. I am the only tech support at our school. When I use USB printers (HP models of various types) with Dell Inspiron laptops, Win XP, the printer reinstalls as a copy when the user reconnects the laptop to the printer or the docking station. Then the printer is active on "Copy 1", and the default printer is still set to the original printer/port. The user print job fails unless they select the new copy of the printer. How can I keep this from happening? Thanks.

A:multiple copies of printer?

Read other 6 answers

hi guys; many a time i've found sound advice here from 'googling' a problem. But this time i cannot find anything relating to this;

running a search for *.exe (trying to track an elusive file) among the 1611 files found were 163 all called spuninst.exe inside C:\WINDOWS there were several setup.exe too (16) whereas my friend only has one of each. My system was bought in feb this year (2007) My system details are included in my profile(?)

If anyone can suggest why it should write so many copies (each stored in a uniquely numbered folder) at different dates, I would be most grateful.

Or if someone can tell me if it is safe to delete excess copies of file. (though this will not explain the WHY, and it may just continue to write copies ad nauseaum)


A:multiple copies (163!) of spuninst.exe

It would appear that you keep your PC updated with MS updates while your friend doesn't.

The program lives in each folder that contains an MS update and is the uninstaller for that update.

Read other 3 answers

So now Windows 10 is linked to my hardware and no license key is required. So I can install windows 10 as many times as I want on the one machine in a dual boot environment?

A:Multiple windows 10 copies.

Originally Posted by slingsrat

So now Windows 10 is linked to my hardware and no license key is required. So I can install windows 10 as many times as I want on the one machine in a dual boot environment?

Technically yes

Read other 18 answers

I have Windows XP Home Edition and Outlook XP. I would like to set up a second Outlook.pst file for my wife. I know she could share my file but it would be cleaner if we each had our own separate copy. Would this cause problems for Outlook if the files are in separate directories?

A:Multiple Copies of Outlook.pst

You need to have seperate profiles in order to do this. Make a seperate login in XP for each of you and you should be able to create your own profile after that.

Read other 3 answers

Is it possible to print multiple copies of the same envelope in Word 2000?

A:Multiple Copies of Envelopes

It may depend on what type of envelope you wish to duplicate. Are you printing a return address only? Or creating a self-addressed return envelope? In Word Help under Create and Print an Envelope, it refers you to Tools/Envelopes and Labels/Envelopes. In the Delivery Address box, you can enter the single mailing address and then print all the envelopes you like. Or, using the Return Address box, you can type in the return address you want or enter your default address if you have set it up. Check out the Word Help references for further directions.


Read other 1 answers

It's happened to me again and I cannot figure out how to get rid of them.

I have my default printer, an HP Laserjet 6P hooked up to a Sunix parallel port on my PC. I can print from this printer from any application just fine. The problem is that, over time, maintenance across printers has caused multiple copies of this 6P to appear in the printer drop down list - but not one of them shows up in Devices and Printers!

Case in point: I installed the SP1 upgrade with no real trouble. I did find, however, that I had to reinstall my Canon Pro9000 XPS driver. This was painless, but when I did it it automatically made itself the default printer. So in wanting to revert back to my 6P I... could not go to Devices and Printers because it doesn't show up there. I had to Install a New Printer, whereupon it found my 6P just fine and used the available driver. But now it's Copy 4! And it and none of the others show up in Devices and Printers.

How do I get this printer to show up in D&P (any of them!), and how do I wipe these "extra" copies from Win7?

A:How do I get rid of multiple printer copies?

I've searched but really can't find anything definitive on this (or at least how to solve it). Am I the only one with this problem?

Read other 3 answers

If I multiselect 2 folders and copy them to a destination across the network vs select the same folders separately to copy to the same destinations (2 copies), the time difference is unbelievable. Sometimes I cannot always mutliselect them (different folders). Is there any way to make it copy faster?

My guess is Windows 7 is throttling between the 2 processes making it like 5x as long.

I know I can do one copy, then the next, but sometimes I want it to be done at one time (I'm not sitting there watching it).

I was hoping to avoid batch files as these are 1 time things usually.

I guess I would think Windows is smart enough to know I am doing 2 copies with that same source drive and destination and work it out.

A:Multiple copies very slow

The data transfer speed is set to the network, so what ever your network transfer data rate is, that's what it is. This it do to the hardware of each PC and the router on the network whether wired or wireless.

Read other 5 answers

Hey ya'll. I'm running Windows 7 64 bit. When I got up this morning a program (WinMHR) that scans processes and files for malware, reported 4 copies of explorer.exe as infected. I always thought there should only be one copy of it. I also did a search for explorer.exe in Everything. Here's a screenshot: 1305909911-clip-117kb.png clip. I actually shows 20 copies of it. I was running an online backup with Digital Lifeboat that I was concerned about, so I rolled back with Rollback Rx hoping to remove these copies of explorer.exe, thinking Lifeboat had something to do with them being there. After rollback, they're still there and that's why I'm posting this.
Hope someone can help me clear this up.

A:Multiple Copies of explorer.exe

My system reports "clean" and I have a dozen listed, most have the same entries as those in your screen shot.

What nasty is your malware scanner program reporting and where are they located?

Also, what version of Win7 are you running? I found this in the WinMHR FAQs -

Why do I get a warning on my 64-bit computer?

WinMHR is currently a 32-bit application. This means WinMHR can not scan running processes that are 64-bit.
You can still check any file using WinMHR, so a 'Quick Scan' or 'Full Scan' will check the files that launch the process that reside on disk.

Read other 3 answers

I have Win 7 retail. I currently have one installation of this OS on my machine in Bristol where I am doing my internship.

I am wondering if it is possible to install another copy of this same OS on my other machine where I live (elsewhere in the UK)?

I would never be using the OS at the same time. It would be mutually exclusive; either running on one machine or the other.


A:Multiple Windows 7 Copies

No, 1 license per computer, simple as that.

Read other 6 answers

My Excel is making copies every time I try to delete files. It is now up to 152 and making copies of copies. How can I stop this?

A:Eliminate Multiple Copies

Hi Lucy Ann,

please check the SAVE OPTIONS in:

File \Save As \Tools Drop Down button \ General\ Options.

There is an option 'Always Create Backup' which you should uncheck.

(Unless in the first place when you open your file you are opening as a copy?)


PS I think on some earlier versions this flag was on the Tools \Options \ General Tab. The Options I am referring to above is specifically in the Save As dialogue window.

Read other 1 answers

For about 2 years when ever I am working with photo image files my computer will spontaneously copy ones that I am working with. Subsequently I now have hundreds of multiple copies of the same images. Sometimes I have tried to delete the copies as I am working but I never get ahead.........only more copies. Does anyone have any thoughts or suggestions about what is happening or how I can stop it.



A:UNWANTED Multiple jpg copies..........

Read other 8 answers

I have 3 computers each having itzs own copy of Vista. the CDS have become mixed up. How can I determine which CD belongs to which computer? Is there a way I can look up the key on each computer to be sure which CD belongs to it?

A:Multiple Copies of Vista

I think you will find all the installation discs are the same content wise and contain all versions of Vista. Its your license key that is unique.

Lets just elaborate a little... the discs only contain either 32 or 64 bit software not both. So look under 'system' in control panel and see what your versions are for each PC and if different ( am ix of 32 and 64 then match to the discs that way). If the licence key with the disc is an OEM type (original equipment manufacturer, such as an upgrade disc) then that key can only be used on the PC it was first activated on. If they are full retail copies then you can use them on any PC at any one time.

Read other 6 answers

System: Windows XP HOME SP3
Outlook Express 5
A Tiscali email address (now Talktalk)
A Windows Live Mail Account
Internet speed varies between 0.25mb/s to 2mb/s​

I have been working on this problem for a client for over a week now and am getting nowhere!
Originally the problem was that they were receiving multiple copies of the same email each time the opened Outlook Express.
I logged into their mail sever via the internet and cleared all the old emails off the server incase one had become corrupted. They were also suffering incredibly slow internet speeds, (0.25mb/s) so I increased the time OE allowed before deciding the server had timed out. Sadly, none of this worked, so I tried setting up the account afresh having re installed OE and also creating a new identity. The problems remained, so I tried setting up their email account in Outlook 2003, however this made no difference.

The problems then became worse as they could no longer receive ANY emails, but still send them.
I moved on to assuming the problem lay with the mail service provided by Tiscali /TalkTalk, so set up a free account using hotmail, and set up OE to receive. This worked perfectly for about 3 days, but now the problem has returned and again at first they were getting 6 of each email, with that dropping down to none.
I read elsewhere online about deleting the file "Pop3uidl.dbx" however after doing this, they received 10 copies of each email!!!!!

Iím completely at a loss and ... Read more

A:Multiple copies of emails or none at all!

Read other 6 answers

My Windows Task Manager shows multiple Process entries running under the same User Name, ie
3 copies of iexplore.exe under my User Name
2 copies of MsMpEng.exe under SYSTEM
3 copies of svchost.exe under SYSTEM and LOCAL SERVICE
2 copies of svchost.exe under NETWORK SERVICE.

Is this right to have multiple copies running concurrently?
Which of these processes can I safely stop?
The MsMpEng.exe CPU overhead certainly causes a long delay in the loading of IE.
Do the multiple MsMpEng.exe copies contribute to this problem?
(I run Windows XP using Windows Security Essentials, Windows Defender and Spybot).

Many thanks for any help.

A:Multiple Process Copies

Multiple copies of SVCHOST.EXE is normal.
IE will open multiple iexplore.exe processes, usually one for each tab, depending on available resources.

If you are using Microsoft Security Essentials (MSE), you should turn off Windows Defender (MsMpEng.exe)
MSE should have disabled Windows Defender in Vista/Win 7, and on XP, it should have uninstalled Windows Defender.

For XP, use Control Panel | Add/Remove Programs to uninstall Windows Defender.
Vista - Turn Windows Defender on or off
Windows 7 - Turn Windows Defender on or off

Read other 2 answers


I have a report, with 3 sub-reports in. It collects all the data for a particular SiteID. in Each of the sub-reports, there is a cost value. One for Hardware, one for Mobiles, and one for Phone lines. I have fields at the top of report which reflects the values and totals them up. Works great, except:
When i have a SiteID with one of the subforms being empty; i.e no mobiles on the site it displays fine in the report view, but when i go to print or publish as a pdf it strips out the subform with no value, and throws an error in my calculation. I need the calculation there, which means i need it to stop striping out the subform with no value. I however cannot see how to do this...its just bugging me, its fine inthe report view, just when you send it to print.

Would grateful for some help,

Thanks Mike

A:Solved: Access Report removing sub-report when printing etc.

Read other 16 answers

Outlook Express: Is there a quick and easy way to make multiple copies of the same email I'm creating, to keep them in my draft folder? The emails all will be identical, and need to have the same Subject, Message, and an attachment. I've been copying and pasting, and that takes forever. I want to have these emails ready to send to employees, when needed, so that I would only need to put the recipients email address in the "to" area, when I need to send them one of these emails.
Is there an easy way to do this?

Thanks so much, if someone could please help me.


A:Creating multiple copies of an email

When you've created the e-mail and it is in your drafts folder, right click the message header, copy to folder, and under local folders, pick 'drafts'. Do it as many times as you like.

Read other 2 answers

I just moved to a drive that I set up via the OS discs. I transfered the folders for Windows mail and had the whole client set up with all the old messages yet when I logged onto the net it went ahead and downloaded all the same messages again from the server.

I stopped it and went to the server and marked all read but it still downloaded all of them and I had to go through and delete one by one over 780 messages from my inbox.
So OK I won't do that again. I'll save them separately just in case but let the client just reload them all.

Still why does this happen? Why doesn't the client recognize that it already has these messages in the inbox folder? Is there a way to avoid this problem in future other than not transferring the messages to the inbox and letting it download them all again? BTW that means I have to go through at some point and find all the junk I deleted from the client but left on the server.

Thank You

Read other answers

I have win 7 home prem 64 bit on a Samsung Gamer Series notebook. No problems for months. Didn't even need to restart ever except after updates. About 1-2 months ago, installed Nvidia Experience, but haven't loaded any games yet. Installed Steam 7-3, but haven't installed any Steam games either.

The most recent change was letting Nvidia Experience install driver updates, but no Betas. 2-3 driver updates in last 1-2 months. Just had latest update from GeForce 320.18 drivers to GeForce to 320.49 a couple days ago. That update also updates / Installs PhysX System Software 9.13.0604. And
Installs HD Audio v1.3.24.2

Seems like troubles started then, but I've also had about 16 Wordpad documents and 25 Firefox sessions open at a time while doing some financial research papers. Don't know if it's a coincidence or not, but when running WMP, seems like switching from Dual View to just the notebook display used to make everything wonky for 5 seconds, but then it would be ok. Now, I get a loud rattle and then no sound until I close and re-open WMP.

Firefox has also crashed w error 41 several times in last few days.

Mouse starts to intermittently stutter, then stops regularly for 5-10 seconds, then freezes. and CTRL Alt DLT doesn't do anything. Have to hard boot.

System Specs below & SF attached.

Any ideas or anything obvious in the report?


Computer Manufacturer/Model Number
Samsung "Series 7 Gamer" Model:... Read more

A:Multiple copies of Video drivers-what to do?

Your logs are pointing towards your Nvidia drivers, which is when you thought the issues began:


* *
* Bugcheck Analysis *
* *
Use !analyze -v to get detailed debugging information.
BugCheck 7E, {ffffffffc0000005, fffff8800e1ab6cc, fffff88003768058, fffff880037678b0}
Unable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+8bf6cc )
Followup: MachineOwner
4: kd> !analyze -v
* *
* Bugcheck Analysis *
* *
Usual causes: Insufficient disk space, Device ... Read more

Read other 9 answers

W-XP. Saved pictures in (My pictures folder ) keep reproducing for no reason.

When i save a picture then go to my pictures to view it. as many as 40 or 50 of the same picture are showing.
How can i prevent this from happening ?.

A:How to stop multiple copies in my pictures.

Read other 6 answers

I recently noticed several copies of mshta.exe running on my computer. They often seem to be using a great deal of memory. I never noticed this before and they all seem to have some relation to the url (in Latvia?). I'm not noticing any trouble with my browsers or computer, except occasional slowing.

Here are my logs:
DDS (Ver_10-11-10.01) - NTFSx86
Run by Michael at 9:48:28.71 on Wed 11/24/2010
Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_22
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1012.416 [GMT -7:00]

AV: AntiVir Desktop *On-access scanning enabled* (Updated) {AD166499-45F9-482A-A743-FDD3350758C7}

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\Program Files\Avira\AntiVir Desktop\sched.exe
C:\Program Files\Avira\AntiVir Desktop\avguard.exe
C:\Program Files\Common Files\InterVideo\RegMgr\iviRegMgr.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Avira\AntiVir Desktop\avshadow.exe
C:\WINDOWS\system32\svchost.exe -k imgsvc
C:&... Read more

A:Multiple copies of mshta.exe running

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will ap... Read more

Read other 18 answers

Here ya go, I download to specified directory, My Documents/My Pictures for pictures and My Documents/My Music for Music files ok so far. But lately in shared, owner and C:\Documents and Settings with the above already directories I see I know have three copies of any pix, music or doc i recently downloaded? So, how can i stop this multiple copying and storing in Windows Xp?

Read other answers

Windows XP SP3 Home
MS Office 2003
Microsoft Security Essentials

I've discovered that I have the following multiple/duplicate versions of the same software. Wondering if I can delete older versions and only keep most current.

Microsoft .NET Framework v2.0.50727.3082
Path = C:\WINDOWS\Microsoft .NET\Framework\v2.0\aspnet_wp.exe
Microsoft .NET Framework v3.0.4506.2152
Path = C:\WINDOWS\Microsoft .NET\Framework\v3.0\Windows Communication Foundation\SMSvcHost.exe

Microsoft Office 2003 11.0.8161.0 (extension for Firefox)
Path = C:\Program Files\Microsoft Office\OFFICE11\NPOFFICE.DLL
Microsoft Office 2003 11.0.8161.0 (extension for Firefox)
Path = C:\Program Files\Mozilla Firefox\plugins\NPOFFICE.DLL

Microsoft Windows Genuine Advantage ActiveX Control
Path = C:\WINDOWS\system32\WgaTray.exe
Microsoft Windows Genuine Advantage ActiveX Control
Path = C:\WINDOWS\system32\LegitCheckControl.dll

Microsoft Windows Media Player 5.1.2600.5512
Path = C:\WINDOWS\system32\mplay32.exe
Microsoft Windows Media Player
Path = C:\Program Files\Windows Media Player\mplayer2.exe
Microsoft Windows Media Player 11.0.5721.5145
Path = C:\Program Files\Windows Media Player\wmplayer.exe

MSCOMCTL ActiveX Control
MSCOMCTL ActiveX Control
Path = C:\WINDOWS\SYSTEM\mscomctl.ocx (old drive)

A:Multiple/Duplicate Copies of Same Software

Since I have not rec'd a reply to my inquiry in almost 2 mos., can someone tell me if I can find the answer somewhere on this site?

Read other 2 answers

This issue started about two weeks ago when I noticed my system was totally bogged down... opening MS WORD would take 2-3 minutes... loading a web site would take 4-5 minutes... even pulling up Task Manager would take several minutes.
At first,  the Pgm X that was spawning itself was named some nonsense name --osrao.exe, weyjehvj.exe, lhrrpqzfza.exe, omuhsiefud.exe, funintyu.exe, WSED.exe, RecCtrlU2.exe, ziupwof.exe, equforyfi.exe, etc.-- it would create up to a dozen or so copies and the only way to stop it was to END PROCESS 'em one by one. Usually they'd show up again, sometimes not though.
Often the only way to shut my system down was to force it by using the POWER button.
So I picked up Malwarebytes and ran it... MB found LOTS of items it wanted to quarantine... and I let it.
Ran MB again, it found a few more; quarantined & then deleted everything MB said needed it.
System was fine for a couple of days as CPU usage was consistently below the double-digit mark.
Then we started a round of Pgm X being dllhost.exe... again, 15-20 copies running when left alone, and the only way to stop 'em was several rounds of END TASk'ing 'em.
Now we're up to iexplore.exe being the spawning fool. Malwarebytes hasn't found anything in the last day or two at least.
So it's time for the big guns... you guys.
Following are my system specs... if there's anything else you need, lemme know and (it would help if you use ... Read more

A:Multiple Copies of Pgm X Spawned-CPU Usage at 100%

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2. SecurityCheck may produce some false warning(s), so leave the results reading to me.NOTE 3. If you receive UNSUPPORTED OPERATING SYSTEM! ABORTED! message restart computer and Security Check should run Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll dow... Read more

Read other 1 answers

Seems this is a common problem that hasn't been solved. My laptop HP Pavilion DV7 running Windows 7 worked fine for many years. Took it on a train trip and when back home suddenly had 4 copies of the desktop image. Other than this it works fine. Upgraded driver, rolled back driver. Had some success by re-starting after the problem occurred. My external monitor shows the same images.

One time I flipped it over while it was running, looking at the bottom, and the problem went away. I'm wondering if there is a physical problem with a card or something. The Amtrack train is a bone crusher at times and is a constant pounding. Also wondering if this could be heat related.

Read other answers

For about 2 years when ever I am working with photo image files my computer will spontaneously copy ones that I am working with. Subsequently I now have hundreds of multiple copies of the same images. Sometimes I have tried to delete the copies as I am working but I never get ahead.........only more copies. Does anyone have any thoughts or suggestions about what is happening or how I can stop it.



A:UNWANTED Multiple image copies

What ever app you are using, some where in the settings it is set to backup the photos that are being edited. You will need to find that setting and disable it if you don't want the program to make backups.

Read other 2 answers

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4010 Mb
Graphics Card: Intel(R) HD Graphics Family, 1813 Mb
Hard Drives: C: Total - 596476 MB, Free - 540568 MB; D: Total - 14000 MB, Free - 7272 MB;
Motherboard: Dell Inc.,
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled

For a month or so, quite often I receive about 40 or more multiple copies of an email. Could the likely cause be my laptop, the sender's CPU, the Server or something else? How to stop it? Although I've had a computer for many years I am still a novice so please be specific with any instructions you might be offering me. Thanks. John

A:multiple copies of same Thunderbird email

Read other 6 answers


I'm working on a problem we have at work and am hoping for some advice here.

My situation is this:
At work we have to remote into many different sites using many different methods (each specific to our clients). Some of these methods conflict with each other so they need to be installed on different copies of XP/OS(in all we need 6 different environments). We originally had an older computer running multiple copies of XP in VMs. We found this way too slow for the work we needed to do. We then started trying to round up a bunch of PCs and install the software on them. This worked a bit better but was not efficiant to get up and move around to multiple PCs when working with multiple clients.

Does anyone have a solution that would incorporate one computer? Maybe multiple partitions each having XP installed?
It would be useful if this machine could be remotely connected to from our own stations and be able to switch to the different copies remotely as well. We would like to be able to connect with more than one user at a time but that may be pushing it.

Maybe I'm way off track and there is a better solution to our problem. Please provide any suggestions

Thank-you for any and all information!

A:Running multiple copies of XP on one computer

Well...any hard drive will accomodate 4 installs of Windows on primary partitions...but only one will run at a given time. All four cannot run at the same time...same as any multiboot system.

Only 1 partition per hard drive can be active at any one time.

Even if you installed multiple hard drives (as I have)...only one O/S partition can be active at any given moment.

You may wantr to read http://www.raymond.cc/blog/archives/2008/05/22/how-to-share-keyboard-and-mouse-on-multiple-computers/ .


Read other 1 answers


I am in the process of switching from Widows Live Mail to Outlook 2010.

I am receiving multiple copies of each e-mail in Outlook 2010, wheras the same
e-mails are being received correctly in Windows Live Mail.


A:Receiving multiple copies of each e-mail

Quote: Originally Posted by Ken9251


I am in the process of switching from Widows Live Mail to Outlook 2010.

I am receiving multiple copies of each e-mail in Outlook 2010, wheras the same
e-mails are being received correctly in Windows Live Mail.


Morning my time Ken,

How long have you had this problem?

It is possible that the following may apply to you????

Network and server problems

If you are receiving duplicates of your mail, the cause may be technical difficulty along the delivery path. Either a network connection is having problems, or one of the computers along the route is very slow or having other system problems.


Most mail delivery protocols and programs are conservative. If they are unsure whether a mail message was successfully passed along to the next computer on the network, the sender will try to send it again. If the message was passed along successfully the first time, the second attempt will produce a second copy of the same message, and you will likely receive both copies.
On large networks such as the Internet, a mail message must usually pass through several different computers before it reaches its final destination. This problem can potentially occur at any computer along the way.
A synchronization problem in the SMTP mail delivery protocol, which is used by most mail programs on the Internet, can make this error more likely.

Unfortunately, there is no real solution ... Read more

Read other 4 answers

Over time I notice that processes like scvhost are duplicated several times, is that to be expected or do some people mask viruses by running them as common names? what is the best way to distinguish a viral process or are most viruses these day hidden inside other processes as DLLs or what have you?

Read other answers

I am not sure on what is happening. Multiple copies of cmd.exe net.exe net1.exe keep popping up and running more copies.Here is my Hijackthis log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 3:41:52 PM, on 1/13/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\Ati2evxx.exeC:\Program Files\Lavasoft\Ad-Aware\AAWService.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exeC:\Program Files\APC\APC PowerChute Personal Edition\mainserv.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\Program Files\IDrive\IDriveWebM.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\Program Files\Common Files\LightScribe\LSSrvc.exeC:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exeC:\Program Files\Norton AntiVirus\Engine\\ccSvcHst.exeC:\WINDOWS\... Read more

A:cmd.exe net.exe net1.exe multiple copies running

Hello! My name is Sam and I will be helping you. In order to see what's going on with your computer I will ask for you to post various logs from the tools that we will use to resolve your issue. Please also share with me any information about how your computer is reacting and behaving each step of the way as we work through this process.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on Download_mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue. If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.The scan will begin and "Scan in progress" will show at the to... Read more

Read other 16 answers