Over 1 million tech questions and answers.

Windows 8 fails to install EVERY update, error code 0x800f0922

Q: Windows 8 fails to install EVERY update, error code 0x800f0922

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.

But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got
the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)

Any help would be appreciated!

RELEVANCY SCORE 200
Preferred Solution: Windows 8 fails to install EVERY update, error code 0x800f0922

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows 8 fails to install EVERY update, error code 0x800f0922

Hi Septura,
After checking the log you provided, I find two error messages.
1. failed to set task enabled status., error = 0x80071A91
2. WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
Please use the following command to fix your issue.
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
Note: Replace the C:\RepairSource\Windows placeholder with the location of your repair source.
Best regards,
Fangzhou CHEN

Read other 8 answers
RELEVANCY SCORE 121.2

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)
Any help would be appreciated!

P.S. I just reinstalled Windows and tried installing the updates again, but same thing. I cannot install any update at all.

If you want, you can add me on Skype: septurae

A:Windows 8 fails to install EVERY update, error 0x800f0922

have you tried to run
Code:
chkdsk c: /f /r /x


? I had Windows Updates failing recently and ran chkdsk by booting from the Installation disk (so that the OS was not running and the HD could be unmounted). It found bad sectors and fixed them and the updates installed perfectly fine after that.

Read other 1 answers
RELEVANCY SCORE 95.6

I am working on a client's laptop, and have been unable to update to Service Pack 1. Stand-alone manual installer results in error 0x800f081e

I have also run the System Update Readiness Tool, and this is the most recent log:

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2016-12-23 17:24

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages
(f) CBS Registry Error 0x80070002 Package_for_KB2695962_SP1~31bf3856ad364e35~amd64~~6.1.1.0 failed to get Visibility

Checking Component Store

Summary:
Seconds executed: 531
Found 1 errors
CBS Registry Error Total count: 1

Read other answers
RELEVANCY SCORE 95.6

Hi there,

I'm having an issue with a laptop running Windows 7 Home x64 SP1. It has failed to install Windows Update Agent 7.6.7600.320 and keeps trying every time I try to run updates.

I've downloaded the installer and tried to run it manually, but that gives me the error 0x80070002

I've attached my CBS log from the last time I attempted the install. Any help will be much appreciated!

A:Windows Update Agent install fails, Error Code 800F081F

The v320 update installer isn't commonly available (unless you know where to look) - where did you attempt to download it from?

Here's the error-sequence from your log...

Code:
2014-09-10 23:15:06, Info CBS Exec: Staging Package: WUClient-SelfUpdate-Core-UIComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.256, Update: UI, PinDeployment: amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.256_pt-pt_76bae7f7dbc23d63
2014-09-10 23:15:06, Info CBS Calling client to resolve source, cannot find file 'wuaueng.dll.mui' at path: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui
2014-09-10 23:15:06, Error CBS Exec: Failed to pre-stage package: WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.320, file: wuaueng.dll.mui, source: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all missing files for package: WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10... Read more

Read other 4 answers
RELEVANCY SCORE 95.2

Hi folks,

I have a HP Elitebook Folio 9470p.  It came with Windows 8, and I installed it on my corporate domain.  I was trying to do some Windows updates so  I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them.  It has about 18 updates it needs from security updates to a .net framework update.  I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do.  It gives this error in the event log for each file, Event ID 20.

Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).

This is the example for KB2862152, but it gives the same error for every one.  I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail.  Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?

Thanks for any help!

Read other answers
RELEVANCY SCORE 94.4

Hi,
I upgraded from win7 to win8 through online microsoft store (so don't have original win8 DVD). When I try to play a particular game a window pops up telling me I need to install .net framework 3.5. I go ahead with it and it downloads the files then while
installing, it gets near the end when it stops and comes up with the error code 0x800f0922. I went into 'Turn on and off Windows features' and it is listed there but unticked, when I tick it it starts to install then stops with the same message. I've tried
/scanhealth and /restorehealth on cmd but nothing. I downloaded .net framework 3.5 from microsoft but with the same error. I even tried putting my win7 disc in and doing:
DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:f:\sources\sxs 
I changed the directory to my the correct DVD drive. It failed at 99.8%. In
my SkyDrive is the DISM log for it. I also tried the framework clean up tool but that didn't work either.

https://skydrive.live.com/redir?resid=B4770DD9876D28E0!442&authkey=!ADbUcCRibles8Mo&ithint=folder%2c.log
Please help, I really have no idea what to do anymore. Thank you.

A:error code 0x800f0922 while trying to install .net Framework 3.5

Hi,

For the issue, let us try rebuilding performance counters to check the result.

Press Win+x, and click Command Prompt(admin)

Type "CD c:\windows\system32",and Enter.

Type "LODCTR /R", and Enter.

Note: This let you rebuild the perf registry strings and info from scratch based on the current registry settings and backup INI files.

Keep post.

Regards,Kelvin hsu
TechNet Community Support

Read other 6 answers
RELEVANCY SCORE 89.2

My laptop has been unable to install the KB3193494 update. Each time it gets to 99% then gives me a message saying Windows couldn't finish installing updates and rolls back the changes. The event viewer is showing a message of "Installation Failure: Windows failed to install the following update with error 0x800F0922: Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3193494).". I've attached the event details here. Any help would be appreciated.

Read other answers
RELEVANCY SCORE 87.6

Hi, this particular update has refused to install correctly since the 14th. Other updates have installed with no issue. Ran SURT and tried to manually install it from direct download.

Any help much appreciated.

A:Error code 80070490, Update 2790113 fails to install

Hi zatoichi,

As you've correctly isolated, Windows in your system has failed to install an update on numerous occasions:

Code:
2013-02-28 17:06:12, Info CBS Failed to get session package state for package: Package_3_for_KB2564958~31bf3856ad364e35~amd64~~6.1.1.1 [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
Though unlikely, you may still try resetting the 'Windows Components' to see if that helps: How do I reset Windows Update components?

If the issue persists, please try a manual install: http://www.microsoft.com/en-us/downl...ng=en&id=27653

You may also refer to the following 'Microsoft Article' that recommends 'Windows Repair' in this case, if 'System Update Readiness Tool' fails to fix it: Windows Update error 80070490

Hope this helps.

Read other 5 answers
RELEVANCY SCORE 87.6

windows key + R. typed "services.msc"
App Readiness already set at "manual."
Failed at least 16 times.

Read other answers
RELEVANCY SCORE 84

Hello,

I recieve error C80003FA whenever I do a Windows Update run. It doesn't get past the stage of checking for updates.

I've tried several fixes including:
- Waiting 15 minutes and running Windows Update again.
- Letting Windows Update run on its own schedule.
- SFC /Scannow
- Renaming the Catroot2 Folder.
- Running 3 different Fixit tools.
- Clean windows install.

After each and every one of those fixes I've tried windows update and I still get error C80003FA.

SFC Scannow has previously said no errors, but the last run through it said there were unfixable errors. I've got the log, though for brevity's sake I will keep it until someone asks for it.

Any ideas?

Thanks.

A:Windows Update fails in Update Check. Error code C80003FA.

Clean windows install doesn't fix it? You must be blocked, maybe your firewall???

Read other 9 answers
RELEVANCY SCORE 83.6

My Windows Update has been failing to update for a while now and I can't seem to find the solution. Here's the run-down of what happens step by step:Launch an update scan for Windows Update
It scans for a few seconds then says:





Quote:
Install new Windows Update software

To check for updates, you must first install an update for Windows Update.



Once I click Install it begins to "Install and Update," but then immediately returns to "Checking for Updates."
The next box I see says:





Quote:
Windows could not search for new updates

An error occurred while checking
for new updates for your
computer.

Error(s) found:
Code 800F081F


This happens every time I've attempted to update. After looking up the error code, I found the main Windows site that gave me the following explaination:
If you receive Windows Update error 800F081F, it means that Windows Update or Microsoft Update cannot determine the cryptographic service provider, or a file Windows Update requires (named catalog store) is corrupted.

I've looked through multiple Windows forums and How-To's and have tried all the fixes I found. SURT, sfc/ scannow, the standalone download for WU, Windows Update Diagnostic, multiple malware scans, and Microsoft Fixit. Ultimately, I always get the same error code, (800F081F).

I should also say this problem has been here for a few months now, and it's becoming more worrisome as more time passes. The longer I... Read more

A:Windows Update fails to update, error code 800F081F

Hi Mookeylee & welcome to Sevenforums.

Please follow Windows Update Posting Instructions

We need to see the logs to determine the cause of the error.

Worst case scenario, and last resort, repair install windows 7. No big deal I just did 2 yesterday win7x64 Home Premium. Brink posted a great tutorial Repair Install.

Read other 3 answers
RELEVANCY SCORE 83.2

When I try to install KB3182373, a "Security Update for Microsoft Silverlight", Windows Update reports failure with the message "Code 643 Windows Update encountered an unknown error".
I ran WindowsUpdateDiagnostic.diagcab. It reported that "Troubleshooting couldn't identify the problem".
What can I do to fix this? I'm running Windows 7 Professional.

Read other answers
RELEVANCY SCORE 83.2

Greetings fellow Windows enthusiasts,

I was asked to update our Windows 2008 R2 server from IE 10 to IE11, and it will not install properly.  I have looked up several solutions to this issue, so far nothing has worked.

I disabled McAfee HBSS in safe mode, restarted the PC and tried to run Windows Update managed by a WSUS server.  The update gets approved and pushed out to the 2008 R2 server.  It downloads IE11, tries to install, then fails/errors-out at the last
second.   I have tried this a few times, rebooted and either get error code 9C47 or 9C49.  


Some of the fixes I have tried:


I turned of internet connectivity and the anti-virus, that did not workI tried the Windows Update repair tool, that did not work  I tried the Windows System Readiness tool, that did not work   I tried to scan the system files for errors with sfc /scannow
and that did not work  I tried installing the other updates first, restarting and it still fails I removed the server from WSUS and re-added it and it will not update   I tried the stand-alone IE11 installer, and it fails at the very last step and then gives me an error with a link to troubleshoot IE installations   I have uninstalled IE10, and now am totally stuck with the absolutely horrible experience of IE9 SURT returns no errorsSFC returns no errors
Technical information:

I have checked the Windows Update log file, the last errors that I found ... Read more

Read other answers
RELEVANCY SCORE 83.2

For about the past two months Windows update has failed to run. If I try to run it manually it just sits there spinning its wheels. It does not appear to end or produce an error code.
I have seen the message "could not check for updates automatically"
I've been to the MS site and downloaded both
MicrosoftFixit.wu.RNP.6329995410378136.2.1.Run.exe
and
WindowsUpdateDiagnostic.diagcab
and the third party
Repair-tool.exe by ParetolLogic
but none of these fix the problem.
Today I have run SURT as instructed and the output from sfc /scannow is attached.
Update is still refusing to do anything.

A:Windows 7 update fails. No error code

I see no attachments??

Read other 9 answers
RELEVANCY SCORE 82.8

Windows won't update, i ran sfc as an Admin in CMD and no issues.

Adobe is activated on Edge but still doesn't work, could this be related?


System Details
Windows 10 Home 64bit
Build Version: 10586.420

Read other answers
RELEVANCY SCORE 82

Hello experts,

I have ASUS Essentio mini-pc with Windows Vista Home Premium x64 installed.
I did run virus checker, spy checker, several registry cleaners.
I spent a week on it , as well Microsoft support logged in for an hour.
I did run the batch file re-registering DLL's.
The original error 80070424 is gone since I run the "ErrorFix" utility.

My recovery CD form the manufacturer is only to wipe out all what I have installed and reload the "vanilla" system. Windows repair option is not available.
This is for me out of question, to many programs are installed on my system.

Here is the problem I think:
Windows installer is missing,
Windows Installer 4.5 Redistributable installation fails. error code 1603
"Windows update" does not work, error code: 80040154

Questions
1. Is there any way to restore the Windows Installer files ?
2. Upgrading to Windows Vista Ultimate version will fix the missing files ?

Any other suggestions?

TIA
Frank

A:error code: 80040154 - Windows update fails

Try this Error message when you use Windows Update or Microsoft Update Web sites to install updates: 0x80070424
and this:An update is available to fix a Background Intelligent Transfer Service (BITS) crash on a Windows Vista-based computer

Read other 11 answers
RELEVANCY SCORE 82

Hi,

Due to problems with interrupted updates and my graphics driver I had to re-install Windows 7 Ultimate x86 (dating from 2010).
Unfortunately, Windows can not perform updates anymore: it immediately issues an error code 800B0100.
After running several tools from Microsoft the problem still exists.
So now I turn to the real experts and hope you guys can help me.
I have run the tooling suggested on your forum and attached the CBS files.
Now I hope you can help me.

Thanks in advance,
Hans

A:Windows update fails with error code 800B0100

CheckSUR shows these files to be you problem...

Code:
Unavailable repair files:
servicing\packages\WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~x86~en-US~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~x86~en-US~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Core-UIComp~31bf3856ad364e35~x86~en-US~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~x86~en-US~7.6.7600.256.cat
servicing\packages\WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~x86~en-US~7.6.7600.256.cat
servicing\packages\WUClient-SelfUpdate-Core-UIComp~31bf3856ad364e35~x86~en-US~7.6.7600.256.cat

I'll post a fix protocol later

Read other 6 answers
RELEVANCY SCORE 82

Hi
I've recently been getting failures for windows updates, specifically the quality and security rollups on Windows 7 (e.g. KB4284826). The error code reported is always 8024200D.

I've looked this up and found one or two related posts, including:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/f2e35118-5845-4264-9bd5-3cbfba32a53a/8024200d-trying-to-install-the-latest-kb4054518-december-2017-monthly-rollup-on-some-windows-2008-r2?forum=winservergen
I've been through several of the steps mentioned on these and other forums, including:


Deleting the SoftwareDistribution folderRunning sfc /scannowRunning the System Update Readiness Tool
None of these have revealed any issues or resolved the problem.
The CBS.log has the following errors and seems to be complaining about missing files:

2018-06-25 15:12:40, Info                  CBS    Calling client to resolve source, cannot find file 'MsSpellCheckingFacility.exe' at path: \\?\C:\Windows\SoftwareDistribution\Download\277eca38c86ad27dcfdcf30a1c66bbca\amd64_microsoft-windows-s..-downlevel.binaries_31bf3856ad364e35_6.3.9600.18860_none_5f7c208eff6532ba\MsSpellCheckingFacility.exe
2018-06-25 15:12:40, Error                 CBS    Exec: Failed to pre-stage package: Package_1470_for_KB4284826~31bf3856ad364e35~amd... Read more

Read other answers
RELEVANCY SCORE 82

The service is started and automatic, was automatic (Delayed) but changed that - no difference.
I did receive 3 updates yesterday but Belarc Advisor states I'm short of 11 critical updates.
I believe it as I just installed Office and no updates are being offered.
Maybe the servers are down.
I hope using Timernuke to get around the activation issue hasn't caused this.
GRRRRRR

A:Windows Update Fails Error Code 80070422

This happened to me too while I had some installations running on the background.

I guess it's either this, or at the same time windows automatic update was running, and it just fails to notify you of that.

After all my installations were finished, or after a restart, I don't remember, the Windows Update worked fine.

Regards

Read other 9 answers
RELEVANCY SCORE 82

My windows update fails all the time.It comes to the end and then fails. Picture 1
I have tried microsoft fix it ”says it fixed 2 treats" but update fails again. Picture 2

I have tryed to do it manual, both with case 4 and without but
4 it reads but do not find
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe qmgr.dll
9 it don't read and don't find
regsvr32.exe msxml.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe initpki.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wuweb.dll
regsvr32.exe muweb.dll

Tried Windows update standalone fix it still fails

I have tried SFC Scan report attacht

any surgestions

A:Windows Update Fails w error code 80070308

There's no obvious problems (apart from your errorcode) in any of the data posted.

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)
Please also post the C:\Windows\windowsupdate.log file.

Read other 9 answers
RELEVANCY SCORE 82

I installed a new hard drive on my Dell Vista XPS M1530 and can no longer use the Windows Update. I get the error cod 8024A000
Is there a fix for this?

A:Windows update fails Error code 8024A000

You have an open topic on same issue at http://www.bleepingcomputer.com/forums/topic454536.html .

Please pursue that topic .

To avoid confusion, this topic is closed.

Louis

Read other 1 answers
RELEVANCY SCORE 82

My machine hasn't been able to update for a few weeks. Windows Update opens, but attempting to download "Security Update for Windows 7 for x64-based Systems (KB2585542)" fails with error code 80073712. There was a second update of the same sort that was also not working before; I eventually managed to get that update to complete by running Fixit in aggressive mode. Nothing I've done has helped with the remaining failure, though.

Let me know what other information I should provide. Thanks in advance.

A:Windows Update fails: error code 80073712

> It would greatly assist us if you would provide your System Specs please...
See snip below.
Attachment 196992
> Peruse the link below...

You receive error code "0x80073712" or the "Windows Features" dialog box is empty when you try to install updates or components in Windows 7 or in Windows Vista

Read other 3 answers
RELEVANCY SCORE 82

Hi Forum,
I tried to install last updates but failed... The code error is 80073712.
I ran different protocols and you'll find the following files with this link : Microsoft servicesCheckSur.log
WindowsUpdate.log
CBS.log
Components
You'll find below, the failed udpates list
Thanks in advance for your help

A:Windows Update fails : 80073712 code error

Please complete this tutorial so our expert can have a look at the logs.

Windows Update Posting Instructions

Read other 3 answers
RELEVANCY SCORE 82

Hi,

All Windows automatic updates have been failing since 2015-11-12. The last successful update was the Windows Malicious Software Removal Tool x64 - November 2015 (KB890830) on 11/12/2015 03:17. The first failed update since then was Security Update for Windows 7 for x64-based Systems (KB3100213) on 11/13/2015 20:25.

Manual installation of the pending updates does not work. Reboot does not install the pending updates either. Another symptom was that Windows was no longer detecting my third party Anti-Virus software. I removed and reinstalled the software thinking it might be related and Windows started detecting the Anti-Virus software again but I can no longer access the computers from other computers on my home network. For now let's focus on the Windows problem which may be hardware failure induced--hardware crash/power cycle without a Shutdown.



System details are as follows:Dell XPS 420 Desktop
Windows 7 Home Premium 64 bit, SP1
Intel Core2 Quad CPU Q6600 2.4 GHz
8 GB of memory
nVidia GeForce 8800 GT
Generic Sound (on motherboard)
Intel RAID 1 volume with two Seagate Barracuda ST1000DM003-9YN162 1 TB SATA Hard Drives
Dell KM632 Wireless Keyboard and Mouse
McAfee Internet Security Suite
Internet Explorer 11
Symptoms and troubleshooting to date indicates I have an intermittent hard drive failure. It appears that one of the two drives needs to be replaced. Dell boot diagnostics reported a hard drive error code 2000-0142 and one drive has dropped out of the array a... Read more

Read other answers
RELEVANCY SCORE 82

The last Windows Update I was able to successfully download was on March 16.  Since then, it fails almost immediately with an error code of 8024402C.  Underneath that it says that the last update date was Never.  I tried just running one tiny 300KB update with the same results.
 
At that time I tried to scan my Dell e6410 with Microsoft Security Essentials, but it wouldn't update either.  I finally was able to manually download updates. 
 
Neither MSE nor MalwareBytes can find anything wrong.
Chkdsk completed normally.
System File Checker completed OK.
The links to GMER from this forum wouldn't load the page.
The C:\ drive is only 1% fragmented, which in my mind doesn't justify the risk of running a defrag.
And this is the weirdest part:  When I attempt to restart the Windows Defender service, it stops itself.
 
Running Windows 7 Professional, 32-bit
4 GB RAM
 
 

A:Windows Update fails, error code 8024402C

Well, this is interesting:  Windows Update worked fine when I used a public Wifi instead of my home connection.  Contacting my ISP now....

Read other 1 answers
RELEVANCY SCORE 82

Since mid February, all of my Windows update patches have continually failed with and error code of 80070308. I have never had an issue with any Windows Updates prior to mid February. I am running Windows 7 Professional SP1 64 bit. I have a newer Dell XPS8500 machine with 32 GB RAM and an Intel Core i7-3770 CPU @ 3.4 GHZ. The following updates continually fail:

Cumulative Security Updated for IE 11 for Windows 7 x64 based systems (KB2909921)
Security Update for Internet Explorer 11 for Windows 7 for x64-based Systems (KB2909210)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1
for x64-based Systems (KB2898857)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for
x64-based Systems (KB2901112)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for
x64-based Systems (KB2911501)
Security Update for Windows 7 for x64-based Systems (KB2912390)
Security Update for Windows 7 for x64-based Systems (KB2916036)
Update for Windows 7 for x64-based Systems (KB2843630)
Update for Windows 7 for x64-based Systems (KB2919469)

I tried running the "Fix it" program recommended in the MS troubleshooting link, but that did not help. I have also tried installing with Norton 360 turned off (both virus protection and firewall). Any help that you can provide would be most welcome. Thanks in advance!

Bruce


Code:

Diagnostic Report (1.9.0027.0):... Read more

A:Windows Update Fails w error code 80070308

Please follow the Windows Update Posting Instructions and post the requested data

Read other 1 answers
RELEVANCY SCORE 81.6

Hey guys!

So I will start by saying I am pretty tech savvy, so don't try to dumb it down for me. If I have a question, I will ask!

So, we got a computer into our class (I'm a student at a High School). It is a personal favour. It started with Dell telling me it couldn't locate it's BCD FIles. I did some tracking, and couldn't find the files needed, and they don't have any discs or USB's provided by the OEM. Great. That's a problem.

My second thought was to grab Hiren's BootCD v15.2 to grab anything important off of the drive (It has Linux and MiniXP. Both options failed. Kind of starting to irritate me at this point. I asked the person if anything important was on there, the answer was no, so I went with a full reinstall.

Now, I do have a Dell DIsc, which is authorized for any Dell Computer to install Windows 8. But of a brick wall, but no R/W Disc. Transferred things into an ISO for a USB stick using Rufus. Boot into it, fails. Now I'm really mad. At this point I went into the CMD from "Repair" option in the stick. I cleaned the drive of ALL info, drive letters, everything. I created a new volume to store info, assigned a Drive letter ( C:\ ). The new drive is a RAW data storage type, "converted", got an error, checked and it said it was NTFS. Great, reboot, retry an Install -- fails.

I'm quickly running out of options now. I'm lost to what to do, the issue simulates what happened to my personal machine a number of years ago, but that was ... Read more

Read other answers
RELEVANCY SCORE 81.2

Hello dear community,
I have now tried to install .NET Framework for several months, but nothing worked for me. I used the following methods:
- Installing it offline via "dism /online /enable-feature /featurename:NetFx3 /All /Source:F\sources\sxs /LimitAccess", and yes, this is the directory where the folder is. I also ran cmd.exe as an administrator. It instantly goes up to 99.8%, stops
for about 10 seconds, and then returns the error. Here's a screenshot: http://prntscr.com/1eh1x1
- Enable it with Control Panel -> Programs and Features -> Turn Windows Features on or off -> .NET Framework 3.5 (includes .NET 2.0 and 3.0)
- Typing "lodctr /r" into administrative cmd.exe and tried the step above again

Here's my DISM log-file: http://www.mediafire.com/view/j71dpfqf47uif5i/dism.log

I really hope than you can help me.

Regards,
Nick

A:[Windows 8] Unable to install .NET Framework 3.5 - Error:0x800F0922

read my first sentence. You miss a ":" ."A programmer is just a tool which converts caffeine into code"

Read other 9 answers
RELEVANCY SCORE 81.2

I receive a similar error again on our HP Pavilion Notebooks with AMD CPU when updating to Windows 10 Creator update as last time when updating to Windows 10. Our office has a few of the 17-G133cl notebook computers and all of them display the same error message: We couldn't install Windows 10 - 0xC1900101 - 0x20017 - The installation failed in the SAFE_OS phase with an error during BOOT operation. Which is similar to the error displayed during the initial Windows 10 update except that the error shown was 0x1900101 - 0x20000. Back then a BIOS update that became available that fixed the issue. We check for a new BIOS, but all notebooks have the latest BIOS already installed v. F.41 from 9/19/2016. All other systems including other none HP AMD computers upgraded just fine. Any ideas what could cause this issue with that type of system?

Read other answers
RELEVANCY SCORE 81.2

I'm trying to update my HP Pavilion DV7 with an AMD processor to Windows 7 SP1. Windows Update fails with the error Code 8024200D

Read other answers
RELEVANCY SCORE 81.2

Is there any advise to solve this problem?
Thanks in advance!

Regards, Gert

A:Windows Update KB2972211 fails, Error Code 80073712

You have some major problems - but they all appear to be from a single update...

Code:
Seconds executed: 2314
Found 438 errors
CSI Manifest All Zeros Total count: 420
CBS MUM Corrupt Total count: 9
CBS Catalog Corrupt Total count: 9
I'll see if I can workout a fix protocol for you - back soon.

Read other 9 answers
RELEVANCY SCORE 81.2

Hello,
I have the version of IE 11 kb2841134. (opened the browser)
When I try to reinstall it by looking in view updates - it was not there.

My windows update - the IE 11 keeps failing, giving me an error of 9C48.
I've used a Windows Update Diagnostic.
I have an error of 70005, 70002 (when installing IE11 as well), 70057 (during the diagnostic). I've tried the toolkit from windows.

I'm not sure which CBS file it is.
The first CBS file. This is the second CBS file.

Here is the Windowslog file.

I've also included this which was in the log file.


Code:
00:00.000: ====================================================================
00:00.172: Started: 2015/06/06 (Y/M/D) 00:14:27.516 (local)
00:00.234: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.734: Command line: "C:\Windows\SoftwareDistribution\Download\Install\WU-Windows6.1-KB2888049-x64.exe"
00:00.905: INFO: Windows Update Install: Cleaning up old registry entry: KB2888049
00:01.186: INFO: Windows Update Install: Trying to extract package as: "C:\Windows\TEMP\IEF161.tmp\Windows6.1-KB2888049-x64.cab"
00:01.311: INFO: Windows Update Install: Extracted new file to: C:\Windows\TEMP\IEF161.tmp\Windows6.1-KB2888049-x64.cab
00:02.606: INFO: Windows Update Install: Setup return code: 0x00000000 (0)
00:00.000: ====================================================================
00:00.109: Started: 2015/06/06 (Y/M/D) 00:14:36.799 (local) ... Read more

A:Windows Update fails IE 11, error code 0x80070003 & 9C48

Can someone help? :S

Read other 9 answers
RELEVANCY SCORE 81.2

This started happening over a week ago. I did try a repair using the Windows 7 Ultimate-64 bit DVD but the problem remains. When the option to search for updates is pressed a message comes up "Windows could not search for new updates" Error Code 800F080D.
Any help will be most appreciated.

A:Windows 7 update installer fails with error Code 800F080D

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 1 answers
RELEVANCY SCORE 81.2

Hi there,

I have a problem with Windows Update - it continually fails to install update KB2966583 (which is about 2.5MB) and brings up error code 800736B3. I have tried the update troubleshooter for Windows, the update readiness tool and hotfix.

Can anyone help me with this? Thanks in advance.

A:Windows Update KB2966583 fails, error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 9 answers
RELEVANCY SCORE 81.2

For 2 weeks now, I have been completely unable to get Windows Update to run properly on my Windows 7 SP1 Ultimate x64 computer. I have no idea what I did to cause this and I've done some limited troubleshooting to no avail. I would really appreciate any assistance you could offer.
Per the instructions, I have completed the following:

1) I ran the latest version of SURT for my OS.
2) I attempted to run SFC, When sfc /scannow is run from the elevated command prompt, I get the following error:
"Windows Resource Protection could not perform the requested operation."

When I attempt to run sfc /scannow from the recovery command prompt, I get this error:
"There is a system repair pending which requires a reboot". Please note that I do not have a reboot.xml or a pending.xml file in my Windows\winsxs folder.
3) When I attempt to run Windows Update, I consistently get the following error code: 8007370B. Not sure if this helps or not, but when I run the updater, I usually get the TrustedInstaller.exe process running and consuming approximately 13% CPU. Sometimes the error appears within seconds, and sometimes it takes 1 hour of Windows searching for an update before that error code will appear.
4) I have uploaded my log files here: https://app.box.com/shared/static/t1...z5kai23dh5.zip
If there is any further information required, please let me know. I would like to thank you in advance for your assistance!
Bobby

A:Win 7 SP1 Ultimate x64 Windows Update Fails, error code 8007370B

After reading through a few more posts on this forum, I thought it would be best to proactively include 2 more pieces of information.

I have uploaded a copy of my COMPONENTS registry hive here: https://app.box.com/shared/static/sn...7hhhlz83kf.zip


I have also run the Farbar Service Scanner with the following results:


Code:
Farbar Service Scanner Version: 10-06-2014
Ran by ##### (administrator) on 02-07-2014 at 00:19:59
Running from "C:\Users\#####\Downloads"
Microsoft Windows 7 Ultimate Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************

Internet Services:
============

Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.


Windows Firewall:
=============

Firewall Disabled Policy:
==================


System Restore:
============

System Restore Disabled Policy:
========================


Action Center:
============


Windows Update:
============

Windows Autoupdate Disabled Policy:
============================


Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
The start type of WinDefend service is set to Demand. The default start type is Auto.
The ImagePath of WinDefend service is OK.
The ServiceDll of WinDefend service is OK.


Windows Defender Disabled Policy:
==========================
[HK... Read more

Read other 9 answers
RELEVANCY SCORE 80.4

Windows 7 SP1 Home Premium.
I am no longer getting any security updates because the update for Windows Update fails with Error Code 800736B3.

SFC /SCANNOW reports no errors.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

I have attached the CBS folder without the CbsPersist.cab files.

I have already tried the Microsoft KB How to update the Windows Update Agent to the latest version

Attachment 333503

A:Windows Update Agent 7.6.7600.320 Fails - Error Code 800736B3

There's nothing apparently amiss in any of the uploaded files.
Please upload the CBSPersist files, and the C:\Windows\windowsupdate.log file

Read other 9 answers
RELEVANCY SCORE 80.4

Hi folks

I found my way here after being unable to update to IE10 on Windows 7 (32)

the windows update error is:

"Internet Explorer 10 for Windows 7
Installation date: ‎09/‎05/‎2013 10:22 AM
Installation status: Failed
Error details: Code 9C59
Update type: Optional"

I have attached the CBS.zip file. (NB: when I pasted the copy of CBS folder to my desktop I got an error message that access to CBS.log was denied. Maybe this is normal?)

I'd be most grateful for any help you can give.



Regards

Chris

A:Windows update fails for IE10 on Win7 error code 9C59

the copy/paste problem is common - which is one reason why I tend to prefer just collecting the CBS.log file on its own.
Copy the C:\Windows\logs\CBS\CBS.log file to your desktop, and compress it, then upload that.

Read other 9 answers
RELEVANCY SCORE 80.4

Hi there,

I have a lop top with Windows 7 64 bit OS. Of lately, Windows update keeps failing to install some software updates. Here are the details of the s/w that would not install.

Update for Windows 7 for x64-based Systems (KB2732500)
Update for Windows 7 for x64-based Systems (KB2729094)
Update for Windows 7 for x64-based Systems (KB2732487)
Update for Windows 7 for x64-based Systems (KB2647753)
Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2722913)
Security Update for Windows 7 for x64-based Systems (KB2705219)
Security Update for Windows 7 for x64-based Systems (KB2731847)
Security Update for Windows 7 for x64-based Systems (KB2712808)

Every time I login, the windows update poops up and asks me to restart the computer. After trying to restart, it fails. Next time, it does the same thing again.
Please let me know the solution.

A:Windows Update fails everytime. Error details: Code 80242014

Install them one by one and restart every time? It's a bit tedious but it should work.

Read other 3 answers
RELEVANCY SCORE 80.4

Hi,

Windows update for IE10 on win7 64 fails continuously with errore code 9c59. Manual install resulted the same.
I run sfc /scannow which didn't find any problem.

I am attaching my CBS log.

Can anyone help?

Thanks,

Beez

A:Windows update for IE10 on win7 64 fails with error code 9c59

Please follow the Windows Update Posting Instructions and post the requested data

Read other 9 answers
RELEVANCY SCORE 80

Hi just logged into the forum and hope someone can help. I have tried to install this update six times today (07/05/12) after it was flagged as an important update this morning. Looking at my update history it also failed to instal on the 18th October last year but it has not bothered me since and i have not noticed it until now. Of the seven attempts I had the following error codes from earliest to latest : 800B0100, 80246007, 80010108, 8024200D, 8024200D, 8024200D, 8024200D. I have followed advice from MS running KB947821 and FIX IT also disabled my Norton 360 firewalls and auto protect but to no avail. If anyone can help please bear in mind I am not a techie so will need to be told what to do fully. I have read advice on editting the registry but I do not go there! There be dragons!! Also I do not have a DVD with Windows 7 as it was not supplied with my PC and I don't want to restore my computer and lose all my installed software. Any help would be much appreciated. Should I just hide the update and ignore it or will that come back and bite me? Thanks in anticipation.

A:Windows 7 Service Pack 1 fails to install error code 8024200D

Welcome to the forum
To install SP1 for win 7 see the following site:

Win7 SP1 (KB976932) error code 8024200D - Microsoft Answers

For other errors i will see what i can do
Good luck

Read other 3 answers
RELEVANCY SCORE 79.6

Windows update for IE10 on Windows 7 64bit fails continuously with error code 9c59. I tried the stand alone updater with the same results. All other windows updates complete successfully, it's just IE10 that continually fails.

Don't know if this is related but I do have problems with IE8 (current browser). After a while, an open IE window will become non responsive and can't be closed out. I have to use task manager to close it down. I have sent off the reports to MS, but no solution has appeared.

I've attached the cbs file. Let me know what else I can do. Thanks.

A:Windows update for IE10 on win7 64bit fails with error code 9c59

There are no significant file errors in either SFC or CheckSUR logs.

In these cases, it has sometimes been a solution to uninstall IE9, reboot a couple of times, and then reinstall IE9 again, before installing IE10 successfully.
It's worth a try

Read other 5 answers
RELEVANCY SCORE 79.6

Windows failed to install the following update with error 0x800f0922: Security Update for Adobe Flash Player for Windows 8.1 for x64-based Systems (KB3144756)
Any ideas on what this error code means or what can be done to fix it.

Read other answers
RELEVANCY SCORE 76.8

Windows Update installation of Win7 SP1 (updating existing version of 6.1.7600.16385) reports the install as successful until reboot, then says successful and unsuccessful in the same dialog box. Error ID is 80242016. Subsequent run of windows update shows SP1 not installed. Problem repeats, even after following all steps in troubleshooting, including running the recommended hot fix for KB 947821, troubleshooting, & turning off anti-virus. Also, the windows update troubleshooter identifies my system as AMD64 architecture even though it is Intel I7 2600K. System infomation id's the CPU correctly. Any suggestions? System MB is ASUS P8P67 PRO, 16GB memory, AMD Radeon HD 6800 Series video card.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, 64 bit
Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 16360 Mb
Graphics Card: AMD Radeon HD 6800 Series, 1024 Mb
Hard Drives: C: Total - 1907626 MB, Free - 1744588 MB;
Motherboard: ASUSTeK COMPUTER INC., P8P67 PRO
Antivirus: Norton Internet Security, Updated and Enabled
 

A:Windows update install of Win 7 SP1 fails with error 80242016

Not the same symptoms, but check out this sticky thread to see if anything there works for you.
 

Read other 1 answers
RELEVANCY SCORE 76.4

Hi,
I'm looking at a window 8.1 Sony PC , that has not been able to get an update for a year almost
140 Updates available - and they fail within 30seconds with an errorcode
800700C1

Looking into this Error I ran the SFC \scannow and it failed unable to repair files

I have attached the CBS (SR) log here

Any Advice welcom

Read other answers
RELEVANCY SCORE 76

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

A:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

Read other 9 answers
RELEVANCY SCORE 76

This is on a friends Lenovo B520 running Windows Home Premium 64 bit.

I've found that this PC has been failing to install updates for some time now. It's still running IE9 - I can see previous failed attempts at installing IE10 and now it's failing to install IE11 in the Windows update control panel.

I've run the SURT and sfc /scannow

The CHECKSUR.log lists 127 corrupt MUM and Cat files but I'm unable to locate good versions of these to start attempting repairs. I've attached just the log files from the CBS folder as including the CABs meant the attachment was too large.

Thanks for any help you can give.

logfiles.zip

A:Windows update fails to install IE11, error 9C57

Here's the summary from the CheckSUR log...

Code:
Summary:
Seconds executed: 4517
Found 254 errors
CBS MUM Corrupt Total count: 127
CBS Catalog Corrupt Total count: 127
Luckily, they all appear to relate to one update - or I'd have been reluctant to attempt anything short of a repair install.

The SFC results appear to have rolled off into the Persist files - please post the two latest CBSPersist files so I can take a look at them.

I'll post a fix for these file later (maybe tomorrow, though)

Read other 9 answers