Over 1 million tech questions and answers.

Synaptics Touchpad of my HP Pavilion 15 Notebook PC not work...

Q: Synaptics Touchpad of my HP Pavilion 15 Notebook PC not work...

My touchpad driver stopped working today afternoon. It was working perfectly and suddenly it stopped and i have recently (last week) purchased it. I uninstalled and the reinstalled the driver but still its not working. Please help me.. Also, please note down my Notebook details:

HP Pavilion 15 Notebook PC
{Private Information Removed}
Product number: E3B55PA#ACJ
Windows 8 Single Language 64-bit
Date of Purchase: 24 Aug. 2013

Regards,
Yash Bansal
{Private Information Removed}












Solved!
View Solution.

RELEVANCY SCORE 200
Preferred Solution: Synaptics Touchpad of my HP Pavilion 15 Notebook PC not work...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Synaptics Touchpad of my HP Pavilion 15 Notebook PC not work...

Hello , Please check the following in the control panel, it is possible the touchpad has been turned off.You can enable the double tapping feature on/off feature.

Read other 10 answers
RELEVANCY SCORE 86.8

Yesterday , i use touchpad is normal , better speed no problem , last time i use Laptop no update driver automaticly , but today i use my touchpad have trouble , first i use , my mouse can move , i moving right it run right but stop hafl ( max range touch ) , i think maybe for my touch weak , i try again move from right to left , it run hafl , so i think virus on my laptop , i reset my lap . After my lap on , i move again but i didn't move right or left , just up and down although i keep moving left to right and right to left , it still move up and down , can't move left and right . So i uninstall driver , check hp driver touchpad new version , download and install but i still there , i try restart and last time it isn't move , standing in place , i use my mouse usb move normal , what is there problem ? Hardware or software ? I just bought laptop 4 days ago ( if in 1 weakeend pc got problem can trade other ) . Do you think i should trade new ? I tried Hardreset but it doesn't work , everthing , plz answer me fast i got 3 day left .... ( i use win 7 64bit sp1 ram 4gb nvidia GF ... if you need any picture i can take it and sending for you 

A:Touchpad of my HP Pavilion 15 Notebook PC (Laptop ) not work...

Hi AndyKiet, welcome to the HP Forums!   I understand that you are having a problem with your touchpad on your notebook. I will try my best to help you with this issue. In this document for Using and Troubleshooting the TouchPad or ClickPad (Windows 8) are steps that may resolve your issue. If this does not work, then please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Country-language selector. I hope this helps, please let me know how it goes. Thank you and have great day!




I worked on behalf of HP.

Read other 7 answers
RELEVANCY SCORE 77.6

I have a Toshiba Satellite A200 running 32 bit Vista, and I used to be able to scroll with the touchpad, however, it doesn't seem to be working any longer. Also, in the synaptics pointing device program, I am unable to configure actions to the left and right buttons. I checked apoint.exe and it seems to be working fine...does anyone know what may be causing this or how to fix it? What should I be reinstalling? It's very annoying and I'd like to be able to scroll without holding the button and dragging. Thanks

A:Toshiba Satellite A200 Notebook - Synaptics Touchpad Not Scrolling?

It could be a hardware issue.

I had similar problems w/ notebook - mousepad had to be replaced.

You could try to un-install all drivers in Device Manager then re-boot. Vista will re-install. Also make sure to go to OEM site and get updated driver - if available.

Note that you will lose mouse function completely after un-install. Have USB mouse or b/c familar with CTRL-ALT-DEL that will get you to screen so you can use arrow keys to restart system

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 77.6

Quote:





Originally Posted by justinc89


I have a Toshiba Satellite A200 running 32 bit Vista, and I used to be able to scroll with the touchpad, however, it doesn't seem to be working any longer. Also, in the synaptics pointing device program, I am unable to configure actions to the left and right buttons. I checked apoint.exe and it seems to be working fine...does anyone know what may be causing this or how to fix it? What should I be reinstalling? It's very annoying and I'd like to be able to scroll without holding the button and dragging. Thanks

Read other answers
RELEVANCY SCORE 76

Hello,
My problem is that after switching off the touchpad mouse some time ago, now I cannot switsh it on. Usually I use a normal mouse, as it is more convienient. But when I am out of home I surely would like to use the touchpad one.
When I try to habilitate it in the contral panel, it works for several seconds only. I tryed it with and without the normal mouse - no differrence.
My computor is Acer Aspire 5610, Windows XP. Never had viruses.
I have tried to download a new driver from the link I have found in this post:
http://www.aqua-soft.org/board/showthread.php?t=43310
and put it on the existing one - no result.
Maybe I should delete the old version driver and then put the new one?
In advance thank everyone for help.
Irina
 

Read other answers
RELEVANCY SCORE 75.2

I just upgraded to Windows 10 and have discovered a problem that I can't seem to fix. When I Right-click on my Touchpad, nothing happens. This was very useful when I need to fix a word spelling & get options for the misspelled word.

I have an HP Pavilion using Synaptics Touchpad.

Any ideas ???

A:Right Click does't work on Touchpad (Synaptics)

Hi, do you mean the touch pad button (I presume you have one) or the double tap right click option?
And can you confirm the obvious, that rt click with a mouse works?

Read other 9 answers
RELEVANCY SCORE 75.2

Since a few days my touchpad doesn't work proper. In this case I need to restart my X1 (2nd Gen) a few times until it works.I already installed all the drivers from the Lenovo Site. Also the companion App shows that all drivers are up to date.When i enter the mouse menu the right side with the touchpad is grey and i can not activate the touchpad.The trackpoint and also the "hardware" button on the touchpad works at all time. Any idea what it can be?

Read other answers
RELEVANCY SCORE 73.6

I have Acer D150. Im looking for solution at the moment.

Sometimes when i start the laptop and the mouse driver wont load properly so i have to use keyboard to go Device Manager and click Synaptics PS/2 Port TouchPad and rightclick and click Uninstall. The uninstallation went successful and the touchpad is working. But the problem occurs when i shut down laptop and next when i wish to use the laptop the problem's there.

Computer help from Paltalk advised me to uncheck and recheck Synaptics mouse on msconfig and i tried that and it didnt work.

Been went to PC World this afternoon and show to man and he checking and puzzling and advised me that he think mouse driver wasnt the problem but something is affecting mouse driver so advised a reinstall of XP. That why im looking for more solution to repair the problem without reinstall of XP.

Thanks for help.
 

A:Synaptics TouchPad mouse dont work at startup

Read other 6 answers
RELEVANCY SCORE 72.8
A:notebook 3000 N500 touchpad doesnt work (touchpad funktioniert nicht)

Hi,  Today I bought this model and have the same problem. If anyone know the solution, please share it here. thx arghhhh!!!!  there, in a top right  corner of the laptop, is a sensor button. Just press it and touchpad becomes alive (it dosn't look like a button at all) ADMIN EDIT - There is now an official tip which explains the N500 trackpoint function and the button to enable / disable it.Message Edited by Mark_Lenovo on 03-04-2009 01:28 PM

Read other 5 answers
RELEVANCY SCORE 70.4

At the risk of sounding like a total idiot I have the following question.....how on earth do I use my Touchpad?!I can move the cursor around but there are no left and right buttons like on my previous laptops so how do I use this function? Are there other buttons I should be pressing as alternatives?! Final thing; sometimes when I double tap it in order to select something it works and sometimes it doesn't.Please can somebody help this total computer idiot out....!Many thanks.

Read other answers
RELEVANCY SCORE 69.6

I am running Windows 10 on an Acer and recently downloaded and installed the update for the Synaptic touchpad (January 17, 2017).  After rebooting my laptop, I can use the touch pad to move the cursor when logging in, but once the system as loaded,
I cannot move the cursor using the touch pad.  I can left-click and right-click, and shrink and expand on the touch pad, but have no control over the cursor.  I currently have a mouse attached to the computer in order to move the cursor.
When I click on the link for more information about the update, there currently is no information.  Quite frustrating.
Please advise as how to resolve this issue.
Thank you.

Read other answers
RELEVANCY SCORE 68.4

I bought my laptop on Febrary and i used only the mouse not the touchpad.When I was clening my pc, I see thath the right part of touchpad is more inside than the left part; and there is step from the touchpad and the chassis.I don't use the touchpad and this problem is very ugly to me. How I can replace this problem? How It can be caused by?Someone of yous had the same problem?I have a lot of care for my laptop.

Read other answers
RELEVANCY SCORE 65.6

 Hi there this is my first post I have searched the rest of the forum before making this post and tried all of the other suggestions without success System Information HP Pavilion G6 Notebook PCProduct Number A5H09EA#ABUSerial Number 5CD14477ZKWindows 7 64-Bit Version ProblemWhen windows Starts the light about the touchpad is not illuminated.  It is not on and will not turn on using the 'double tap' method in the upper left portion of the touchpad or the small circular 'indentation. Since it has stopped working I have updated the drivers for the touchpad and no change has happened Sometimes the 'right click' and dropdown button works and the menu appears but no other function works. Sometimes the touchpad works for a short time but it is 'intermittent' and slow and unresponsive. Any help that you could provide would be appreciated











Solved!
View Solution.

A:G6 Notebook Touchpad No Light & Does not Work

Hi, First, download the latest Synaptics driver installer on the link below and save it to your Downloads folder. http://ftp.hp.com/pub/softpaq/sp53501-54000/sp53851.exe Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall. When this has completed, shut down the notebook. Unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter. Tap away at f10 as soon as you press the power button to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter. When windows has fully reloaded, open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again. When windows has reloaded, see if holding down the fn key and pressing the spacebar will illuminate the TouchPad. There are also further configurable options Here. Regards, DP-K

Read other 6 answers
RELEVANCY SCORE 65.6

Lenovo Vantage recommeded me to install the following update https://pcsupport.lenovo.com/uu/en/products/LAPTOPS-AND-NETBOOKS/THINKPAD-X-SERIES-LAPTOPS/THINKPAD-... The firmware update failed with the Error Code[0x69] Since then I can no longer use both the trackpoint and the touchpad!The official firmware update completly bricked my input devices. Does anybody know how to fix this issue?

A:X1 Carbon 6th Gen: Synaptics Touchpad Firmware Update broke Touchpad and Trackpoint

This seems to be an related issue: https://forums.lenovo.com/t5/ThinkPad-L-R-and-SL-series/Touchpad-not-working-after-firmware-update/t...

Read other 1 answers
RELEVANCY SCORE 64

Okay I have been working on this work a while and have exhausted all options, I hope someone can help me. I have a Elitebook 2740p that I have upgraded to Windows 10 from Windows 7. Went smooth except the only problem I have is the flat trackpad the nub for the trackpad works good, but I rather the flat finger pad below the black nub. When I use this the point arrow goes all over the place.  This is what I have done notice installed driver was version 15 deinstalled and installed version 18 of the Symantic driver. That did not work, so I deinstalled version 18 and let Windows install its own driver. That worked except cutting and paste does not work. Is there a fix with trackpad driver that allows the flat portion of the trackpad to work? Awaiting any reply. 

Read other answers
RELEVANCY SCORE 64

Hello, I bought Acer One 14 Z1402 notebook few days before. Windows update was made once. The touch was working fine for 2 days after update and then stopped working. I tried to update the Finger sensing pad driver software (sentelic v9.4.9.9 R4 --> current one), after that the system was restarted. Still the issue continues.Now there is error like "PC is running into problem, it will automatically restart in few moments"  then blue screen appears.

A:Acer One 14 Z1402 notebook - Touchpad stopped work...

Elangovan,
 
Try performing a refresh if you can, should that fail, a reset to start over. If you are having issues getting into Windows itself to perform the refresh/reset, here is an article that might help.

Read other 5 answers
RELEVANCY SCORE 63.2

Unable to use the mouse at all which means i am constanty having to use the touchscreen on the laptop. Any help on how to get my mouse to work again would be very much appreciated Thanks

Read other answers
RELEVANCY SCORE 62.4

Hi, my laptop's screen doesn't work; yesterday my laptop update its self, so I thought it was an update's problem and disintall it but the problem still persist. I'm writing this with it, using an extern screen so I think the problem is not on the mother board but with some connection to the display. Now, I don't have garanty of the product so I thought to open it and see if there is something disconnected, but first i'd like to know if maybe can be a software problem. Can you help me? Thank you very much. By the way, sorry for my bad english.

A:HP Pavilion g6 Notebook PC, the screen doesn't work

@cottils Hello;Allow me to welcome you to the HP forums! Can't see how this woud be a software problem, especially since you're getting a good display through an external monitor.Sorry, but we are not HP Tech Support; instead, this is just a community self-help forum staffed by vounteers. We have no way of diagnosing or repairing your PC from here.  All we can do is provide links to troubleshooting steps that HP has written, and links to HP drivers.Here are some troubleshooting steps you can try:  http://hp.dezide.com/ts/start.jsp?guide=DisplayissuesandTouchscreen.net&section=ccweb&as=true&SFS=td...If those links don't diagnose or fix the problem, or those drivers don't work, your only recourse is to take the PC into an HP Service Center and have them look at it.Here is a link with information on HP Service Centers: http://support.hp.com/us-en/document/c00372730?jumpid=reg_r1002_usen_c-001_title_r0004Good Luck

Read other 2 answers
RELEVANCY SCORE 62

Hi. Ive had a problem for a little while with my girlfriends laptop.  HP Pavilion Notebook - 15z-p100 CTO (ENERGY STAR) AMD/AMD-Radeon graphics HD 8610g/r7 M260-Windows 8.1 64bit (previously Win10 64bit)  The laptop isnt working for buisness or pleasure because none of the graphics drivers from Hp (and Ive tried them all) are working properly. We upgraded the laptop to windows 10 a while back and we learned that apparently doing that makes it so the recovery harddrive that came with it wont work. I tried factory resetting but that didnt work at all, leaving me no choice but to reinstall windows 8.1 fresh. Obviously thats not how it was shipped to me as I assume its missing crutial HP installs and such to make the switchable graphics work. Ive ordered the media to revert back to factory settings but my question is, is that even going to work? It seems like after windows 10 came out the drivers for my specific laptop, and other people that ive read about just wont work for switchable graphics.  AMD and Microsoft both say to talk to HP. So that being said, here I am. What is someone to do with a crippled computer that was still fairly recently purchased when all of the video drivers wont work? Ive gone through HP assistant, ive gone through the hp website and downloaded everything individually but still with no luck. I look forward to hearing from someone.

Read other answers
RELEVANCY SCORE 62

Just replaced hard drive and restored to factory defaults. Computer whirring. Was going to check into possible fan issues. Was afraid it might be hot. Removed battery. Continued working. When I got up to go get something I pulled the plug out and it of course shut down with no battery in it. Now it will not start again. I did the hard reset. Unplugged it and held down start button for 15 seconds, replugged in, but nothing. No lights on computer. AC adpater light is on. Thank you for any help!

A:Pavilion g6 Notebook. No power. Hard reset did not work. No ...

Hi @leigh466,  Welcome to the HP Forums!  I read your post on how your HP Pavilion g6 Notebook will not power on. I am happy to help!  Please try the steps within this guide, Computer Does not Start (Windows 7, Vista, XP). If this does not resolve the issue, please contact HP phone support for hardware options. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Please remember to return to this thread and mark 'Accept as Solution', if I have successfully helped you resolve the issue. If you wish to say 'thanks' for my effort to help, click the 'thumbs up' to give me a Kudos. Hope this post is helpful!

Read other 1 answers
RELEVANCY SCORE 62

I think that is my operating system. I bought a blurtooth speaker and it pairs but no sound comes out.

Read other answers
RELEVANCY SCORE 60.8

I have an HP Pavilion dv2000 Notebook. All of sudden the speakers aren't working but I can get sound from headphones. I hear chirps from the speakers when I touch the Quickplay buttons but that's the only sound I can receive. Nothing is muted. Can anybody help me figure out what's going on? Thanks!!!
 

A:Solved: No Sound from HP Pavilion dv2000 Notebook but Headphone Jack Work

Could be a sticky headphone jack, try plugging in and removing the headphones a couple of times rapidly.
 

Read other 2 answers
RELEVANCY SCORE 58.4

I upgraded to Windows 10 perfectly but after i installed Windows 10 driver of Synaptics TouchPad 19.0.19.1 PS/2 on my hp pavilion dm4-1265dx from official Synaptics webpage, everything works fine except one thing; Locking area on top left of the touchpad. Normally when you touch on it twice, the red led has to lid and touchpad should be locked, however now; the red light is always on and i cannot lock it with double touch.

Read other answers
RELEVANCY SCORE 58.4

I have a Synaptics TouchPad v11.0.7 on my HP Pavilion dv6000. I prefer a higher sensitivity on the pad, so I change the pointer options. However, after I restart my computer, the preferences reset to default. I have tried uninstalling and reinstalling the driver but the same thing continues. This is getting very irritating. I have no other mouse drivers on my computer and I am at a loss for a solution. I would much appretiate any help.

Tony Williams
 

Read other answers
RELEVANCY SCORE 58.4

Hi all. I am having a lot of problems with my touchpad mouse built in .I have sony vaio vpcea36fm i3 hdd 500 gb ram 4 ddr3. As far as i have searched there are no updates for the driver.This is my driver version 6.1.7600.16385. I have tried to uninstall and install with reboot but its still not working.I apprecite all the help

A:synaptics ps/2 touchpad

You don't elaborate what your problem is ? is it working at all or is acting strange ?
Have you checked the BIOS to see if it's disabled ?
Otherwise, you may just have a bad piece of hardware there, take it to a shop and have them open it up and check.

Read other 1 answers
RELEVANCY SCORE 58.4

Hey, can I uninstall the synaptics touchpad in my laptop, and reinstall it again? Synaptics is not running on start-up but it is activated in msconfig, and CCleaner. Is it safe to uninstall and reinstall it again? If I uninstall it, will my touchpad still operate?

A:Synaptics Touchpad

Hi, kyzersoze.

You'll be fine. On my Toshiba, I've done it at least a half dozen times for various reasons - none which are important here.

Read other 9 answers
RELEVANCY SCORE 58.4

I have two laptops where the touchpad works great but its driving me up the wall. I keep going to places I don't want to go. I need to turn off the touch feature for enter and cannot find it. Is it available yet for vista?
 

A:synaptics touchpad

Read other 10 answers
RELEVANCY SCORE 58.4

Hi. I'm having a problem with my HP Pavilion dv6000's touchpad. Recently (i.e. Today) it has been giving me an error and shutting down a program called "Synaptics Touchpad Enhancements", which has the adverse effects of slowing down the touchpad's sensitivity, and making the scroll bar on the side of the pad useless. Restarting solves this problem, but it occurs again after perhaps thirty minutes or so. I've already tried redownloading the drivers for it, but it hasn't solved the problem. In addition, upon selecting the mouse via the Control Panel, I'm confronted with this error.This problem has me stumped. Can anyone shed some light on what I could do to solve this?











Solved!
View Solution.

A:Synaptics Touchpad

Hi,The issue you have mentioned and the error you attached clearly state that there is an issue with the Synaptics Touchpad drivers on the system. To resolve the issue, I suggest you uninstall the Synaptics Touchpad drivers completely from the system through Control Panel, Add/Remote programs (Win XP) or Programs and Features (Win Vista). After complete uninstallation, please restart the system. Download the latest drivers from the following weblink and then install the software. This will definitely resolve the issue.http://www.synaptics.com/support/driversHope this information helps.Regards,Vidya

Read other 7 answers
RELEVANCY SCORE 58.4

Hello,

Recently my Synaptics TouchPad suddenly stopped working on my Compaq M2000 laptop; I fixed the problem by re-installing the Synaptics driver. When I restarted the computer, the TouchPad was working fine, but the keyboard was not working at all, so now I cannot type in my password to log onto the computer.

Is there any way to solve this problem without having to format the computer?
 

A:Synaptics TouchPad

dont format. use a different comp, download (savepe) its a recovery program. you can run chkdsk from there. it will load its own drivers. savepe is a live xp cd.
 

Read other 1 answers
RELEVANCY SCORE 58.4

my Compaq Presario 2195US notebook touchpad stopped working properly; the pointer moves and the buttons work, but the tap feature is gone. all looks okay in Control Pad/mouse; I checked pointer setting in BIOS and tried AUTO and BOTH. I downloaded and installed the latest driver, just in case, but no change.

help?
 

A:Synaptics touchpad help

The touchpad could be worn out
 

Read other 1 answers
RELEVANCY SCORE 58.4

I would like to mention that upgrading to Windows 10 on 2 HP laptops. On the one that is older which had the synaptics driver 15.3.29.0 the tapping worked fine, on the newer unit the driver was current with version 19. something. With attempting to adjust the synaptics using the up to date driver there was real no satisfaction. I deleted it and installed the 15.3.29.0 driver and it works great..

Hope this helps someone...

dsherman

Read other answers
RELEVANCY SCORE 58.4

So I am at the end of my rope with my laptop's touchpad. I can not disable the tap-to-click option, and because of this I am CONSTANTLY clicking on things every time I type or do anything.

Also, the scroll does not work.

I have searched through all of the mouse options and there is not one single option anywhere for tapping or scrolling.

I have updated the driver. I have uninstalled the driver and tried installing an older version of the driver. I can't find anything that will give me these options, no matter which drivers I install.

I am using Windows XP, on a Dell Inspiron 6000. According to the hardware tab, I am using a Synaptics PS/2 Pointing Device.

Please, please, PLEASE help! Please!
 

A:Synaptics touchpad - PLEASE help!

I am not a fan of the touchpads on laptops. I have always disabled them and used a notebook mouse instead. While this may make for some difficulty while traveling, I don't inadvertantly select, click or move the cursor while keyboarding.
 

Read other 2 answers
RELEVANCY SCORE 58

Hi Guys, My touch pad isn't working on my aspire E1-572P laptop. Windows 8.1 64. I have deleted and re-installed the driver several times, still won't work, although the icon lights up when I press right or left button but nothing on the touch pad

A:Synaptics touchpad problems

The Synaptics touch pad gestures are not working on my Aspire E1-572P, although I have tried loading updated drivers from both Acer and Synaptics. The problem may have started since I had a touch screen replacement done by Acer about 2 months ago. The touch pad works fine as a mouse pointer. I had an on line chat with an acer tech. but he suggested doing a factory reset, which I thought was a bit extreme so I thought I might try here first. Would be grateful for any help. Thanks

Read other 5 answers
RELEVANCY SCORE 58

For some reason, the Synaptics Touchpad control panel's settings do not save in Windows 10.

A:Synaptics Touchpad vs. Windows 10

Please try the following steps to resolve the issue.1. Click the Start orb, type msconfig in the Start Search box and hit Enter. If you are prompted for an administrator password or confirmation, type your password or click Continue.2. Within the System Configuration dialogue box, click the Startup tab.3. Look for any entries named KHALMNPR or similar, and uncheck the box next to them (there may only be one).4. Click OK and restart your computer.

Read other 4 answers
RELEVANCY SCORE 58

i am currently having touchpad and mouse problems.i used my wireless mouse once and my trachpad stopped working compltetely.i have seen that this is a common problem but ive tried everything and nothing works. a hard reset worked once to get my mouse pad working again without the wirelss mouse but when i needed to click it was doing nothing. i have tried another hard reset but the mouse pad still didnt work. the mouse only appears when i plug in the wireless mouse in. when i go into settings there is not synaptics, so i downloaded synaptics for my laptop and it said "could not find OS specific program." so i unistalled the previous version, downloaded the version for my laptop but still said the same thing even though it was the version for my laptop.Any idea's????

Read other answers
RELEVANCY SCORE 58

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Starter, 32 bit
Processor: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, x64 Family 6 Model 28 Stepping 10
Processor Count: 2
RAM: 1013 Mb
Graphics Card: Intel(R) Graphics Media Accelerator 3150, 256 Mb
Hard Drives: C: Total - 139212 MB, Free - 113661 MB;
Motherboard: Acer, JE02_PT
Antivirus: AVG AntiVirus Free Edition 2013, Updated and Enabled

Hi
I just did a system restore to "factory settings". Now, my touchpad is erratic and too sensitive. When I go to the Control Panel and click on "Mouse" (as all the advice suggests), I cannot find anything pertaining to the touchpad. I don't know if I need a driver or what. Any help would be greatly appreciated - preferrably before I throw this thing across the room!
Thanks,
Kem
 

A:synaptics touchpad sensitivity

yes you prolly need the synaptics manager driver? What brand PC do u have? if its a dell or HP please post your Dell 7-character Service Tag or your HP Product Number so we can better assist you
 

Read other 2 answers
RELEVANCY SCORE 58

Unable to use multitouch settings , not sure when this happened but it used to work fine and was able to scroll , 4 finger tap , 3 finger touch ect with my touchpad.Now the touchpad isn't reconised, instead ps/2 mouse pointer appears in the advanced settings under mouse and touchpad. I have tried updating software  driver and selecting synaptics drivers instead, but this also doesn't work. I get an error message saying 'This operation requires an interactive window station.' I have downloaded the latest synaptics driver from their site (Windows 10 PS/2 & SMBus Devices v19.0.19.1) still same error message. Thanks in advance, and if anyone can help with a maybe related problem , my keyboard will sometimes not function; correctly problem started not long ago either, maybe the same;  when pressing the letters 't', y, 5 ,6' this types instead 't5,y6, t5 ,y6' amongst other keys (makes typing very difficult haha)     

Read other answers
RELEVANCY SCORE 58

I reverted to V18 of the Synaptics driver as suggested. However, the scroll bar does not work.

Read other answers
RELEVANCY SCORE 58

My computer is a Toshiba Satellite L305 and has a Synaptics TouchPad. I use Windows Vista.

For a few weeks I had been getting messages saying "Synaptics TouchPad has stopped working, click here to solve the problem" or something similar. I didn't think anything of it because the mouse was working fine, so I just hit the "X". I'm not even sure that is a part of the problem even because it has stopped coming up.

Lately the mouse will work fine and after being on the computer for about an hour or so, the mouse will slowly stop working. I can still click and when I tap the touchpad, that will still click. I just won't be able to move the mouse. Restarting the computer does not fix it. Usually I just plug in a mouse and use it for 20-30 minutes and by then the mouse is working fine again.

Any suggestions?
 

A:Synaptics TouchPad not working.

Press FN and F7 at the same time. Post back with results.
 

Read other 3 answers
RELEVANCY SCORE 58

Hello Everyone, I do not usually use forums and other kinds of helps, but guys, this is hilarious.Or... it would be hilarious if happened to another person, yeah. basic data --Probook 455 G2Windows 8.1 64-bit(McAfee IS) So, my Synaptics touchpad started behaving in an odd way yesterday.That is: it works fine at startup, but the tapping surface stops reacting after a few seconds - sometimes after a few minutes. What remains is even more strange: the two buttons remain operational, and the bottom approx. 10% of the surface reacts to right and left movements, while the upper 90% zooms in and out whatever is on the screen... WHOA? And sometimes it goes back working for no obvious reasons. Before stopping again.Next: If I close the lid and open after a few sec, the wake-up process starts and the touchpad works fine until... go to 10.And it is not over: the tapping surface works fine IF I KEEP ONE OR BOTH BUTTONS PRESSED. ?? :-) naturally this is not a "solution" as all side effects of a pressed mouse button occur. But the pointer moves, yeah. Umm. [UPDATE: this later phenomenon was a seemingly software-related sticky Ctrl issue that stopped occurring] What I did this far:1. Driver check: driver uninstall -> reboot -> reinstall (no newer version offered, so the same) -> reboot -> no effect, same symptoms;2. Windows System Restore to a mere 5 days earlier stage: everything worked fine! but then McAfee vulnerability scanner reinstalled all the Windows ... Read more

A:HP 455 G2 synaptics touchpad is a mess now

So bad noone is able to answer this question. :-(Update:- touchpad always starts ok when ProBook is switched on, but halts after an indeterminable (that is always changing) time;- I am unable to determine the trigger - I do not know what (later starting background process and/or clash of processes??) causes this behaviour;- when operable it is like trying to drive a waterbed in the Monaco Grand Prix - lags and slides;- when stops the bottom 10% of the touchpad reflects to left/right impulses and the buttons work well;- quite often is starts again if I move a plug-in mouse and switch back to touchpad after a minute or so - but NOT always;- had a "sticky Ctrl" issue earlier (had loads of fun...)- this is NOT the same;- if the touchpad is stuck with no signs of life I switch off Synaptics processes from Task Manager - I gain a very strange touchpad without the extras of Synaptics and Shaking Like Hell. WOA? but it works for people with lots of patience.I think this is a challenging issue, so dear Hardcore Hardware Magicians - HELP ME!Cheers!

Read other 3 answers
RELEVANCY SCORE 58

Hello, I have now Lenovo Y50-70 with touch screen and Synaptics touchpad (SMBUS). I had Elantech before and it was much better than Synaptics.1st problem is long delay when I click two fingers for middle click (for example new tab or close tab in Firefox/Palemoon) , but in Internet explorer it faster. On Elantech I haven't got thid problem, clicking with two finger was fast as possible. Delay is maybe 500ms. 2nd problem which I have is, how to enable Edge scroll for one finger (on the right side) . I can't find nothing in registry. In Elantech this funtion works perfectly :-/ . Thank you in advance, but I am using touchpad very often, so I need solve these two problems.

Read other answers
RELEVANCY SCORE 58

OK here is the problem,
I was using the touch-pad as always and it was working just fine all morning
than I put my system in standby when i returned my touch-pad was not responding. When I checked the driver properties under device status it read:
device could not start (code 10).
I rolled the driver back and nothing then I tried to uninstall/reinstall the driver from a download I got from the gateway website still nothing finally I tried a simple system restore (not a complete restore w/disk just restored back to sometime yesterday) still nothing even though it was working fine in the time frame i had restored back too.

if Anyone has any ideas let me know, I would greatly appreciate the help.
 

A:synaptics touchpad not responding

Read other 8 answers
RELEVANCY SCORE 58

Does anybody have a tip where I can find free Synaptics Touchpad Drive downloads. I have 7.0 and overnight it froze on me.

I have only recently bought my laptop and it came with Vista which I have been hating and now this latest problem occured.

Thanks.

A:Synaptics Touchpad drive

Hi Zsofia,

Uninstall the driver and then go to windows update. It will detect your touchpad and install the correct driver software. You should be able to use your touchpad even without the synaptics driver as Vista has native drivers for your touchpad.

Good Luck!
Snarks

Read other 11 answers
RELEVANCY SCORE 58

Hello, this is a strange problem I am having...
I used to have xp on my amilo laptop, with synaptics driver 7.10.10, May 2004 driver. The nice thing about this was that the touchpad was disabled when an external mouse was plugged in, just by ticking the proper box in the driver setting panel (disable touchpad when external ... ). Easy and working fine: also, the touchpad was reenabled automatically removing the external mouse.
Now I switched to win7, and I lost this capability. Fujitsu site does not have an updated driver, and recommends to use the manufacturer drivers. Fine, but...
1) the latest version for Win 7/Vista 32 bit is 14.0.3.C, it works OK but there is no trace of that box (disable touchpad when external...): you can only disable the touchpad, and reenable manually.
2) in desperation, I took the old driver used in xp, run the setup in compatibility mode, and it installed (barring the usual complaints about incompatibility); again, it works fine, but no trace of that capability.

Is something in win7 preventing this feature from working? Or is some mix of amilo hardware and win7 causing the problem?
Thanks for any suggestion
Roberto, Milan, Italy
 

A:Touchpad synaptics problem

Read other 6 answers
RELEVANCY SCORE 58

Dear Team, I have recently upgraded the drivers for Synaptics touchpad on my HP laptop (HP Pavilion G4-2049Tx).Everytime I reboot my machine, or "Log On" Synaptics touchpad gestures doesn't seem to work ever since the drivers upgrade. In order that the gestures start working; I have to manually launch any Synaptics related process after log on.To my surprise; Synaptics is already a part of StartUp processes in my Windows OS still it doesn't get triggered at the time of boot. On the top of that; as always I have been facing overheating issues at the time of charging my laptop since quite a long.It becomes impossible to rest the "laptop" on ones "lap" while its getting charged. Kindly help me solve these issues. Thanks in advance!Cheers,Ameya

A:Issue with Synaptics touchpad

Hello Ameya,  can can you do a bios update and bios default on the unit and check once  #hpexpertday




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

Read other 3 answers