Over 1 million tech questions and answers.

Handbrake 0.9.4 available

Q: Handbrake 0.9.4 available

Changes between 0.9.3 and 0.9.4:






Quote:
Core:

New build system, allowing 64-bit binaries (around 10% faster)
Soft subtitles and Closed Captions:
DVD Closed Captions
ATSC Closed Captions
SRT subtitle import
Text soft subtitles in MP4 and MKV output
Bitmap soft subtitles in MKV output
Better support for DVD inputs:
Uses libdvdnav
DVD angles support
Workaround for libdvdread malloc bomb on invalid PGC entry
DVD drive region detection support in Linux
Handles DVD programs with more than 16 streams
No longer tries to detect and discard duplicate titles when scanning
Libdvdnav patched to perform read error recovery
Libdvdread patched to allow raw device access in Windows
Handles poorly mastered DVDs that had the menus ripped out of them
Better support for non-DVD inputs:
Preserves MP4 metadata
TrueHD
DTS-HD demuxing
8 bit audio
Better handling of transport streams where audio starts first
Better handling of transport streams that have been spliced together, leading to duplicate timestamps
Better VC-1 frame detection
Fixes bug that was causing one sec. of audio to be dropped on many ffmpeg files
Looks harder for aspect ratio info from DV sources
No longer truncates the last (dummy) chapter
Allows specifying field parity for detelecine and decomb
Better AV sync
Support for sources with no audio
DTS passthrough for MKV
x264 bumped from r1169 to r1347, which means speed optimizations, new default settings (see r2742 commit comment), the magic of macroblock tree rate control (mbtree), a new CRF curve (meaning you will get different, generally lower bitrates at the same RF, with similar quality metrics), and weighted P-Frames (disabled by default for Baseline encodes and the AppleTV preset).
Better sample interleaving
Better, optional deinterlacer for decomb (EEDI2)
New mode structure for the decomb filter
Variable verbose logging levels
Fixed timing for first two frames coming out of filters
Libtheora bumped to 1.1.0
Improvements to our theora implementation (2 pass encoding + soft target rate control)
Caters to Theora's insistence on content having mod16 framing dimensions specified
Flushes LAME encoder's final packets
Fixed interjob framerate calculation
Fixed pthreads regression in cygwin
Tweaks for packaging tools
Solaris 10 build support

All interfaces:

Live video preview
New subtitle tab
New filters and picture settings inspector
Custom anamorphic mode
Updated Sparkle
Custom number of preview images
Quality slider now works off actual rate factor/quantizer values instead of percentages
Partially updated advanced x264 tab
New built-in presets
Use libdvdnav by default on DVD sources
Removed Constant QP encoding option for x264 (use CRF)
Various bug fixes and UI tweaks
x264 turbo 1st pass mode now uses subme=2 not subme=1

Mac:

Core Audio AAC encoding
H.264 video source decoding crash fixed
Queue displays varying row heights based on encode settings
Fixed EyeTV package scanning
64bit / 32 bit VLC detection
Preset import/export

Windows:

New audio tab
AAC audio source decoding bug fixed
Tray minimization is now optional
Queue can now be started from main window
Growl for Windows notification support
General UI improvements
Preset import
Preferred language control for audio dubs and subtitles
Fixed file extensions resetting to m4v when enabling chapter markers in mkv
Faster updating of GUI elements from CLI data
Cleanup / Improved some of the programs options. (Growl, use m4v, drive detection)
Numerous fixes in the Picture Settings Panel and CLI Query Handling code.
Bug Fixes and Usability improvements.

Linux:

General UI improvements
Inhibits sleep mode while encoding
Single title scan
Chapter duration display
Notifications when encodes complete
Tray minimization
Full screen preview
Preset import/export
Preferred language control for audio dubs and subtitles
Preferences rearrangement
Preference to auto-apply .m4v extension
New system tray icon behavior
Preference for what to do when encode completes
Preference for how often to delete activity logs
Preference to disable automatic scanning
New Gnome session manager support
Improved "auto" audio selection
Use .m4v as the default extension for the MPEG-4 container
Use .m4v when soft subs are enabled
Alternate angle encoding fix
Only strips drive letters for Windows builds
Show correct audio format info when it's been sanitized for incompatibilities
Preserve chapter list modifications made to queued jobs
Fixed error when navigating chapter titles with the keyboard
Bug Fixes.
CLI:

Options to handle new subtitle, anamorphic, and preview features
--srt-file, --srt-codeset, --srt-offset, --srt-lang, --srt-default
--native-dub option lets users request dubbing instead of subs when the audio isn't in their native language
Allow encoding sources with no audio without explicitly stating -a none
Update checker on MinGW built exe should now work correctly.
Matches GUIs' default verbosity level of 1


source

RELEVANCY SCORE 200
Preferred Solution: Handbrake 0.9.4 available

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Handbrake 0.9.4 available

Thank you. I use this every once in a while.

Read other 2 answers
RELEVANCY SCORE 44.8

Nowadays, my mind leads to YouTube Make-up Videos. This is because my sweet-heart likes it. Before long, there will be a birthday for her. So I have to prepare a kissable present Burn a sing-layer DVD with these make-up guide and tips videos. Yep, I am totally kissable. LOL
Well, hmmm, hmmm, forgive me for almost illiterate to these video editing stuffs. Ive used Handbrake (most people recommended), but I have to download the video to be converted. That really frustrated me since the network is soooooo slow. Mad. Is there anybody know of this kind of software which can convert and burn the videos into DVD directly without any other downloader?
 

A:Handbrake ….

Read other 6 answers
RELEVANCY SCORE 44.8

Apparently this is illegal, oops.
 

Read other answers
RELEVANCY SCORE 44.8

Recently dumped my iMac for a Windows 8 POWERHOUSE from Dell. Unfortunately my Handbrake app will not copy commercial DVD movies, although this is easily done on a Mac running Handbrake. Any suggestions? Any FREE Handbrake styled alternatives for Windows out there?

A:Handbrake and Win 8

you need to bypass the copy protection before you can get handbrake to transcode it. how did they get around that on the Mac???

once you've ripped the movie to the hard drive sans copy protection, you can easily use handbrake on it.

Slysoft is well-known for a slew of great products. Check them out. Also DVDFab.

the free stuff is kind of antiquated. stuff like DVD Decrypter, DVD Shrink, etc.

Read other 2 answers
RELEVANCY SCORE 44.8

Hey guys, I have to rip a DVD for my class assignment and splice two clips together, so my professor told use to use Handbrake to do it. However, when I click "open source", my dvd file isn't there. I downloaded a file called libdvdcss-2.dll to see if that would work and I keep trying to open it on my computer but my computer keeps saying that I don't have a program to open it with. What do I do?
 

Read other answers
RELEVANCY SCORE 44

What are some alternatives for Handbrake? I've used Handbrake on my Mac for years, but heard the windows version doesn't work as well. I want to be able to backup copies of my DVD and also have digital versions for my netbook.

Thanks!

A:Handbrake Alternatives

have you tried handbrake yourself?

have a look at dvdshrink - it can rip and backup. it's pretty basic, but it's free.

as far as commercial software goes, dvdfab is very good and can convert to h264, but it costs unfortunately.

Read other 1 answers
RELEVANCY SCORE 44

Sorry if this is posted in the wrong forum.

If I own a DVD purchased out a shop and I want to place a copy on my Hard Drive, is it legal in the UK to do this? I tried Handbrake to rip a music dvd (owned [personally]) but it wouldnt play the file back. Tried WMP and VLC but neither could read the file. Is this an ordinary occurance and all i need to do is try again and hopefully the next time it will work?

A:Handbrake and DVDs

I can't answer about the legality, but I can tell you that you skipped a step. You need something to remove the protection first. The most common and easiest method is to use DVDfab HD Decrypter (which is free) to rip the movie to your HDD, and then Handbrake can take that folder and turn it into whatever type file you need.

Read other 7 answers
RELEVANCY SCORE 44

I'm using Windows 7 64 bit, and when I tried to rip a DVD, after about one hour, an error came up saying something about "This log's size is over 100mb, so there's a problem". So how do I fix this issue?
EDIT: I checked the encode log file, and it said "Block Code disabled" or something like that. Is it just copyright protection?

Read other answers
RELEVANCY SCORE 44

Looking for counsel from anyone familiar w/ Handbrake---> Windows XP---> iPhone. Much obliged!

Read other answers
RELEVANCY SCORE 44

December 3, 2010

Handbrake 0.9.5 is available. Changelog below.



   Information

HandBrake 0.9.5 has now been released.

Release Highlights:

Core Library
* BluRay disc structure support. (No decryption support)
* Updated Libraries (x264, ffmpeg)
* SSA Subtitle support. (Including burn-in)
* MP3 audio now supported in MP4 files (Note: Limited Player compatibility)
* VOBSUB subtitle now supported in MP4 files (Note: Limited Player compatibility)
* Updated Presets for newer devices and better quality
* AC3 encoding support.
* Many Bug Fixes and other small improvements
* Improved DVD Main Feature detection (when using dvdnav)
* Universal audio downmix support (all audio types can be downmixed)
* Point*to*Point encoding (second or frame start and end times)
* Peak framerate option (Capped VFR)

All GUIs
* Updated x264 Advanced Panel
* Video Quality Slider drops % value and only shows RF for x264
* Batch Scan (Scan Multiple files at once. N.B: Does not include multiple VIDEO_TS folders / Image files)
* Many Bug fixes
* Many Tweaks to improve usability.
* Ability to edit queue jobs

Mac GUI
* New Audio Panel supporting >4 Audio Tracks
* VLC detection in /Applications and ~/Applications
* Multiple instance support

Windows GUI
* Encode Status in GUI. (CLI window is now always hidden)
* Improved Auto-Naming for Destination file name.
* Drag / Drop Video onto Main Window to scan.

Linux GUI
* Multiple instance support (run multiple copies of ghb ... Read more

A:Handbrake 0.9.5 Released

I was really hoping presets would be restored in this version. I skipped 0.9.4 because the Xbox360 preset was gone, and no string I found online worked for me as a replacement for the preset.

Read other 1 answers
RELEVANCY SCORE 43.6

I am looking for a handbrake alternative that can do all handbrake can but work. Willing to pay small amount. Anyone know of one which is good?

Hot 4 topics in forums and groups:
Mac OS X - the tenth major version of Apple's operating system for Macintosh computers, has been refreshing people?s experience in computer system ocean.
Apple iTunes - the world's best digital music player and the NO.1 music store. Download music, movies, TV shows, apps, and more to your Mac, PC, iPod, and iPhone.
HandBrake - a free Mac OS X/Windows utility for ripping videos from DVDs and saving them in various formats including MP4 files that are playable by the iPhone/iPod Touch.
Alternative to Handbrake ? special offer page, substitutes in place of Handbrake?s goods, seem to be the same and even better.

Movie fan and Apple fan I am and love the stuffs listed above so much. I often use Handbrake to convert Blu-ray movies or videos downloaded from iTunes to MP4 on Macbook. Things turned different then. Because I own a big collection of Blu-rays and want to put them on iTunes, this totally frustrated me. Which software or somewhat called alternative to Handbrake actually converts copy-protected Blu-ray movies directly to iTunes? I want to go both directions. The question bothers me day and night, so I have to do something. Doing Google search, asking friends for help, anything I tried gives different answers. No doubt there?s no better answer unless comparison. Finally g... Read more

A:Handbrake software alternative?

Handbreak does not support cracking copy-protection.
What you're looking for is a tool to do that, and I can't recommend anything of that sort.
 

Read other 1 answers
RELEVANCY SCORE 43.6

I have a 1080p video (BBC's Planet Earth documentary),but it is in .m2ts format, and i wont to convert it into something more convenient, like .mov,or .mp4,or even .m4v with H.264I tried using various software ,but i get a huge (50 GB) file and i can't play it in either of my players I put constant quality, could it be because of that ?
 

A:Convert .m2ts with Handbrake

sorry, but we cannot assist with this, unfortunately.

from the rules page:

Circumventing Copy Protection - While we believe it's reasonable to make backup copies of CDs and DVDs that you own, a lot of people break copy protection for the wrong reasons. The law is still vague, at best, as to if it is legal to break copy protection in order to make such a backup, even for personal use. (The DMCA, for example, seems to make it illegal.) As a result, we do not allow discussion of how to break copy protection at this time. If we can find a nice way to draw the line, we may reconsider this in the future as laws get sorted out.Click to expand...

closing thread, thanks for understanding.

v
 

Read other 1 answers
RELEVANCY SCORE 43.6

Hello,
Recently downloaded some full movie (mp4), and found a Hebrew subtitle. Located both files in a folder,
opened the subtitle with Notepad, made some minor editing, saved it (encoding UTF-8) srt file,
movie and subtitle same name.
Played the movie in any player on the system, the subtitle rans perfect, no need to adjust timing.
Then I loaded the movie in "HandBrake (0.10.5.0 - 32bit)", imported the subtitle, selected Hebrew and
utf-8, made a small preview file - subtitle was not added.
Note, I used the same procedure several times ago with other movies - results were good.
Do not know what happened, I would ask for some help please.
Thanks
Motim

Read other answers
RELEVANCY SCORE 43.6

I rip my DVDs for playback on my Xbox360. I accomplish this by using Handbrake 0.9.3, since it contains a nice, neat profile for my 360.

The two newer versions of Handbrake do not support profiles, and I'm unaware of any way to export the profile and add it in to a new version. I've found plenty of strings online to try in the newer versions, yet none of the outputted files will play back on my 360. Ones done in the older 0.9.3 with the 360 profile work just fine, on my computer and the console.

Is there anyway around this, or anyway to get the original profile settings into 0.9.5?

A:Handbrake Profile Question

  
Quote: Originally Posted by DeaconFrost


I rip my DVDs for playback on my Xbox360. I accomplish this by using Handbrake 0.9.3, since it contains a nice, neat profile for my 360.

The two newer versions of Handbrake do not support profiles, and I'm unaware of any way to export the profile and add it in to a new version. I've found plenty of strings online to try in the newer versions, yet none of the outputted files will play back on my 360. Ones done in the older 0.9.3 with the 360 profile work just fine, on my computer and the console.

Is there anyway around this, or anyway to get the original profile settings into 0.9.5?


The only thing i can think of is Taking note of what your 360 profile settings are in .9.3 and re-creating them in .9.5.

Also, the AppleTV/AppleTV 2 profiles should work on your 360.

Read other 1 answers
RELEVANCY SCORE 43.2

Hi there

Seems on W10 x-64 with latest updates the updated version of Handbrake sometimes crashes

Works fine on Linux with same settings !!!! encoding the same file !!.

Linux version

HandBrake rev5474 (x86_64)

Windows version

0.10.5.0 64 bit version

Windows build 1607 build 14393.351 (W10 Pro X-64).

Cheers
jimbo

Read other answers
RELEVANCY SCORE 43.2

Hello. I'm ripping DVDs so that I can post snippets of scenes to put on Youtube videos within fair dealing laws. I'm trying to rip DVDs with Handbrake and it does create a file with playable videos, and there are no problems with the sound. However the picture quality comes out noticeably degraded. This might be a compression but I'm not sure.

I've tried adjusting the bar of the "Constant Quality -- RF" bar under the video section to increase image quality before downloading and adjusting over relevant variables but to no avail.

What do I need to do to resolve this issue?

With regards,
Roy
 

Read other answers
RELEVANCY SCORE 43.2

I recently got into ripping Blu-ray movies and encoding them. However I have recently had a few blue screens with restarts. I use MakeMKV and it usually runs fine and doesn't give my problems. However, I have had problems encoding the MKV files with Handbrake v0.9.5. Here are my system specs:

Windows 7 64-bit Pro SP1
Intel Core i5-2500K (overclocked to 4 GHz)
8GB Corsair Vengeance RAM (Model CMZ8GX3M2A1600C9B)
ASRock Pro3 Gen3 Mobo (latest BIOS update 2.30)
Mushkin Chronos 120GB SSD
Seagate Barracuda 1TB HD
Nvidia GTX 560TI graphics card (slightly overclocked,can't remember speed)
Cooler Master Hyper 212+ CPU cooler

The case also has plenty of fans (7 to be exact). 2 intake fans in the front, 1 intake in the side, 1 intake on the front of the cooler, 1 outtake on the rear of the cooler, and 2 outtake on the back and top. So the tower is staying cool. I'm running AXTU Hardware Monitor during the encoding and temps are staying steady around 50C, which I've heard are normal. The encoding is about 50% now and so far no crashes or spikes in temperature.
I thought the memory may be the culprit and I ran MemTest86. It returned one error after a few hours of running. I have not taken the RAM out to test each module or clean the slots. The timing is set at 9-9-9-24 and I dialed down the speed to 1333 from 1600.
That's all I can think of now but if I forgot something, don't be afraid to ask. Please someone help me!

A:BSOD and crash during encoding with Handbrake

If you would like for us to be able to effectively help you, we will need you to follow the Blue Screen of Death (BSOD) Posting Instructions Please be sure to do each step, as outlined in the tutorial. By doing this, we will have the necessary information to help you.

Read other 3 answers
RELEVANCY SCORE 43.2

Inspiron 14R-5437 Intel Core i3-4010U processor with Intel HD Graphics 4400, 8GB of system memory, a 500GB hard drive. Handbrake working, did an upgrade, won't rips movies anymore, gets stuck as it tries to download movie. Handbrake activity log says as Handbrake is trying to (unsuccessfully) rip the movie: libdvdread: Get key for /VIDEO_TS/VTS_04_0.VOB at 0x002d7dc3
Also further down on activity log: dvd: DVDReadBlocks failed (77729), skipping to vobu 77797.
And further down still: [23:48:41] dvd: vobu read error blk 105615 - skipping to next blk incr 10

I have no idea what any of it means or what it is trying to tell me. What is the key I'm supposed to get for /VIDEO_TS/VTS_04_0.VOB at 0x002d7dc3?

Anyone out there on planet earth (don't have to limit it to earth if that helps) can explain to me what the above (to me) gibberish means? I have already downloaded libdvdread some time ago and added it so I can rip movies, but now no go.

Suddenly handbrake is not doing what handbrake always do. Having upgraded to most recent handbrake causing the problem, whereby I included in to the handbrake file this: libdvdread. Still nothing. Should I go back to last version of handbrake I was using, see if that works? I've already deleted current handbrake and reinstalled it. Still won't rip DVD movies anymore. Any assistance would be greatly appreciated.
 

Read other answers
RELEVANCY SCORE 43.2

I get the aforementioned BSOD, only in one specific situation, and it happens 100% of the time. Otherwise, I never get BSODs in this computer. The problem happens only when I open Handbrake, and drop an mp4 on it to use as a source. The moment I do that, boom BSOD. It's extremely strange. I have tried reinstalling Handbrake of course to no avail. For now my only solution is to have a Ubuntu VM with Handbrake and run it that way. Any idea what could cause this? Thanks.

Read other answers
RELEVANCY SCORE 43.2

I am trying to down load the latest version of Handbrake (I dont have any old versions either). On dowloading the exe file when I click run it gives me an error saying ".NET runtime library v2.0 or newer is required. You have 1.1.4322"

What does it want me to do? I am trying to convert my dvds to MP4 format for my iPod video. Cant do anything due to this error.

HELP !!!
 

A:HandBrake Download Error Message : HELP

go to windows update and look in the non-critical updates, the .net v2.0 will be in there simply download and install via the website
 

Read other 1 answers
RELEVANCY SCORE 43.2

Hey,

i'm getting a KERNEL_SECURITY_CHECK_FAILURE BSOD shortly after or by execution of the win10 version of handbrakeCLI (uses x264 encoder).
In compability mode (win7) it seems to work.

I updated the drivers before the last bluescreen (from the Lenovo homepage) but that didn't do the trick.

Laptop was upgraded from Win8 to Win10 some while ago. Dumps point to dxgmms2.sys or ntoskrnl.exe. Don't think it's an application fault, is it?

THOMAS-LAPTOP-19_02_2016_215418,60.zip

A:KERNEL_SECURITY_CHECK_FAILURE while attempting to use x264/Handbrake

Could you explain to me what this handbrakeCLI software is? I'm unfamiliair with it.






Dumps point to dxgmms2.sys or ntoskrnl.exe. Don't think it's an application fault, is it?




Most of the crashes show some stuff of the DirectX Kernel graphics (dxgmms2.sys) what points to the display drivers usually.
The ntoskrnl.exe is Windows Kernel, simplified it is never the true cause unless you experience a hell lot of problems (much more then only bluescreens).

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Read other 0 answers
RELEVANCY SCORE 43.2

Hi. Until yesterday, I had Handbrake 10.2 installed. On launch, a message appeared (within the GUI) inviting me to click for 10.3. Which I did. I can't recall the exact sequence of events but it appeared to have gone smoothly and I was left with a popup saying Do you really want to uninstall 10.2? I said Yes as that seemed logical.

I then went to open up 10.3 ? nothing there. The only Handbrake related file I could find was a defunct link to the shortcut I had on my desktop. Ah well, so off I went and downloaded the 10.3 installer. But before I ran it, I used regedit to delete all registry entries referring to Handbrake. That way, my PC would be 'clean' right?

After the install, 10.3 launched and immediately showed a message about my previous presets and there it was ? 10.3 had the custom preset that I'd made with 10.2! Not only that, but 10.3 was able to load a DVD with DRM protection. To do that with 10.2, I had to copy a 'special' dll file into Program Files/Handbrake.

It seems I was mistaken then. Uninstalling a program and then deleting registry entries doesn't 'clean' your PC. Otherwise, my Handbrake 10.3 wouldn't have known about my old preset nor would it have the 'special' dll file.

So how DO you completely remove a program?

Read other answers
RELEVANCY SCORE 43.2

Hi. Until yesterday, I had Handbrake 10.2 installed. On launch, a message appeared (within the GUI) inviting me to click for 10.3. Which I did. I can't recall the exact sequence of events but it appeared to have gone smoothly and I was left with a popup saying Do you really want to uninstall 10.2? I said Yes as that seemed logical.

I then went to open up 10.3 ? nothing there. The only Handbrake related file I could find was a defunct link to the shortcut I had on my desktop. Ah well, so off I went and downloaded the 10.3 installer. But before I ran it, I used regedit to delete all registry entries referring to Handbrake. That way, my PC would be 'clean' right?

After the install, 10.3 launched and immediately showed a message about my previous presets and there it was ? 10.3 had the custom preset that I'd made with 10.2! Not only that, but 10.3 was able to load a DVD with DRM protection. To do that with 10.2, I had to copy a 'special' dll file into Program Files/Handbrake.

It seems I was mistaken then. Uninstalling a program and then deleting registry entries doesn't 'clean' your PC. Otherwise, my Handbrake 10.3 wouldn't have known about my old preset nor would it have the 'special' dll file.

So how DO you completely remove a program?

Read other answers
RELEVANCY SCORE 42.8

Hi,

My windows is closing unexpectedly when ever I'm trying to convert videos using Handbrake and render my work files on Premier Pro. Before I didn't face this kind of problem it's happening after giving my Mother Board for servicing because of some power problem. I tried in all possible ways I know to fix this problem like reinstalling all codecs and programs, I also reinstalled my Windows but there is no change. I'm using Windows 7 Service Pack 1 with latest updates. Except this almost every thing is normal. How to fix this problem, is this happening because of problem in Mother Board?

A:Windows is closing unexpectedly while using Handbrake and rendering

Admin I apologise for not posting properly.

My Basic System Specs:
Processor: AMD Athlon II X3 440 301GHz
Mother Board: M2N68-AM Pluse
4GB DDR2 Ram
500GB HDD

I'm also attaching zip file of both Windows_NT6_BSOD_jcgriff2 & System Health Report

Read other 9 answers
RELEVANCY SCORE 42.8

Hi I've been using handbrake for approx 3 years running off my secondary HDD. The secondary HDD has died. So I uninstalled the Handbrake that was on that, then re-installed Handbrake to my Local C HDD.

It now will not open properly. I get this blank screen


then when I close handbrake I get the error code

An Unknown Error has occured.
Castle.MicroKernel.ComponentActivator.ComponentActivatorException: ComponentActivator: could not instantiate HandBrakeWPF.Services.EncodeServiceWrapper ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.BadImageFormatException: Could not load file or assembly 'System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The module was expected to contain an assembly manifest.
at HandBrake.ApplicationServices.Utilities.SystemInfo.get_GetGPUInfo()
at HandBrake.ApplicationServices.Utilities.GeneralUtilities.CreateCliLogHeader() in c:\HandBrake\Hudson\workspace\Release_WindowsGUI\0.10.2\win\CS\HandBrake.ApplicationServices\Utiliti es\GeneralUtilities.cs:line 121
at HandBrake.ApplicationServices.Services.Base.EncodeBase..ctor() in c:\HandBrake\Hudson\workspace\Release_WindowsGUI\0.10.2\win\CS\HandBrake.ApplicationServices\Service s\Base\EncodeBase.cs:line 59
at HandBrakeWPF.Services.EncodeServiceWrapper..ctor(IUserSettingService userSettingService) in c:\HandBrake\Hudson\workspace\Release_Wind... Read more

A:Handbrake video converter wont open

You would be better going on their own forums for this one as its their product

Read other 1 answers
RELEVANCY SCORE 42.4

Hi there

Converting 1080p MKV files encoded in H264 to H265

What's the best setting to use keeping original quality as much as possible -- a 2hr film currently with my H264 encode is around 4GB for MKV file.

The source is full HD 1080p captured from SKY Q minibox. Quality on playback is excellent but I want to store a lot of these on an external HDD so want to compress the size down a bit.

(note you need to use an HDMI splitter to get stuff off the SKY Q minibox otherwise the capture device won't see anything (DRM).

The capture device doesn't unfortunately capture in H265 which is why I need the conversion step.

I would like to get about 50% of that size with H265 - but not sure of the settings in Handbrake I should use.

Any video editors here --help please !!!!!

I'm not bothered if the final container is MKV or MP4 so long as it's encoded H265 and quality is very similar (preferably identical) to original file.

Cheers
jimbo

Read other answers
RELEVANCY SCORE 42.4

This is a computer that I built a couple of months ago and it consistently crashes when running handbrake, not every time but say 3 out of 4 times. It will also crash when making large file transfers like moving my movies from one hard drive to another. I have ran Memtest86 without any problems. I have also ran Prime95. When running prime95 these are the options:

It ran the first two options with no problems, but crashes pretty quickly when running the blend test.

Here is a copy of the report from reliability manager for the crash:

Source
Windows

Summary
Shut down unexpectedly

Date
‎3/‎13/‎2012 7:27 PM

Status
Not reported

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033

Extra information about the problem
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800768D8F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I have updated and reupdated all the drivers a couple of times.

Also I ran handbrake in SAFEMODE and still had the crash. I was trying to eliminate some of the hardware and drivers from causing the crashes, but I am not sure what drivers or hardware are eliminated during SAFEMODE.

Please help....thanks.

System Specs:
OS - Windows 7 Enterprise(64 BIT) SP1
CPU - Intel Core2Quad Q9550 Motherboard - Asus P5N-VM WS (REFURBISHED)
Memory - 8GB - DDR2 G.SKILL Graphics Card - Integrated NVIDIA FX470 ... Read more

A:BSOD when running handbrake or during large file transfers

Your .dmp file shows a stop error of 0x124 which is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP. Return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

Read other 1 answers
RELEVANCY SCORE 42

Hi,

For ease of use, i want to make a folder available at my company network for people to drop any video files in, and then to make it output to a standard format (mp4) in another folder. That way no one will have to wait for a video to finish encoding or have to think about conversion at all.

I can use a computer that is always on and running, connected to the network and with free space and processing power, but i wonder if this is the right way. What i have so far:

Using Syncback Pro, I'm automatically watching for file changes in the folder, then syncing the changed files to a local folder (so not to directly encode from the network. Then, after each sync i have Syncback run a bat file for converting, which is inside the local folder. This is the code:

FOR /F "tokens=*" %%G IN ('DIR /S /B *.*') DO "C:\Program Files\Handbrake\HandBrakeCLI" -i "%%G" -o "%%G".mp4 --preset="Normal"

The problem is that it outputs in the same folder as it inputs, which makes syncing back to the network sloppy. The next step in the process, which would be to sync the output files back to the network can be easily done, but not if the original and converted files are jumbled together. =

My question would be:

Am i doing this the right way? (in the broadest sense)
and
Is there a way to output handbrakeCLI converted files to a different folder?

Any help is appreciated.
 

Read other answers