Over 1 million tech questions and answers.

Bios 1.21 & Windows error code 10

Q: Bios 1.21 & Windows error code 10

Item A) Upgraded BIOS to 1.19 & error code '10' showing in Device Manager. Upgraded to 1.21 & same thing happens again. All tests show normal results on hardware. Tried removal & roll-back on the drivers, re-installed them, yet same error code. Machine runs perfectly. Just this one little glitch problem. Anyone know what to do? Would be grateful for any suggestions! Item B) Link for download yields 'The document you have requested is not available. You may have entered an incorrect URL or login with authorized credentials (for Lenovo Field Servicers and/or Call Center Agents only) to view the page' ; regarding ME hardware:https://pcsupport.lenovo.com/ddownloads/DS506357Not 100% certain that this issue is resolved; anyone know what happened?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Bios 1.21 & Windows error code 10

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 59.6

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

Read other answers
RELEVANCY SCORE 53.2

Alright. I have been building a new PC after a recent lightning strike burned the other one. This is the 5th PC I've built and have never had any problems.

When starting the PC it goes through the motions and recognizes the boot disks; however, shortly after a blank screen come up with the POST error code "EB_". According to Intel this is a "Initialize PCI and DMA" error. What is that? And how can it be fixed?

Any help is greatly appreciated.
 

A:BIOS Error Code

I'm not all that experienced in this kind of stuff, but you could try flashing your BIOS to the newest version and making everything is plugged in properly and tight.
 

Read other 1 answers
RELEVANCY SCORE 53.2

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

Read other 1 answers
RELEVANCY SCORE 52.8

New X250 notebook shipped with BIOS version 1.13, and I'd like to update it to 1.17, becouse it has Windows 10 support, and I'm having power management issues with that OS. (cannot wake up from sleep, system freeze when closing lid, even with sleep turned off in that case.) I can successfully downgrade my BIOS to 1.12, 1.11, but I cannot upgrade it to 1.16 or 1.17 (cannot download 1.13, it's revoked). The update starts in Windows, restarts, but then an error message stops the update: Finished PUP flashing, Error Code: Unknown error code (0xC),ADDITIONAL_DATA:0x7Error reported from PFAT: Unknown ErrorStatus of TdkBiosRomWrite: 1ERROR 102 : Failed to perform flash After rebooting, I can comfirm that the update failed. It's strange, as I mentioned, 1.12, 1.11 can be flashed without problems.BIOS rollback protection is off, secure boot is off, BIOS user flash is enabled.I've run out of options, any advice?

A:BIOS cannot update, ERROR CODE 102

Good day and welcome to the community.
 
Sorry you're having difficulty.
If you have access to a USB CD/DVD drive, you could try using the bootable disk method:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x25...
but you might want to speak with Support (info below) about this first. A failed BIOS upgrade can be very difficult to recover from.
 
Regards.
 
 
Hungary


THINK-branded products
English, Hungarian +36-13-825-716
9:00 - 18:00 Monday - Friday

Read other 5 answers
RELEVANCY SCORE 52.8

Please help me on how to fix my bios error code 81FB, i cannot log-in to windows xp

A:How To Fix Bios Error Code =81fb

frozenfire03,

Need more info. Is this error code appearing when you turn on your PC or when you're trying to install Windows. BIOS error code indicates a problem with the PC's CMOS BIOS, not with Windows. Please reply with the make/model of your PC and/or Motherboard and exactly when you're seeing this error.

- John

Read other 1 answers
RELEVANCY SCORE 52.8

Hello,please could you give me advice - I made a BIOS update (Version: 01.42Ap1). This update was strongly recommended in program HP support assistant. Immediately after update the error 601 occurred (for the first time...). The notebook was bought in 6-2015 and it is used only occasionally. The Battery Test in HP Support Assistant shows 0%. The program BatteryInfoView (BIV) shows Battery Level Wear 100% (which means that the battery is 100% ok). On my old (working) notebook EliteBook 8540p the BIV shows 35% level. I think that the battery is ok but something in BIOS is incorrect.Thank you for your advice.Tomas BIV - http://www.nirsoft.net/utils/battery_information_view.html

A:Error code 601 after BIOS update

Hi,  Please try updating the BIOS from HP Software Driver Download Page instead of HPSA.  You can visit the link below to update the BIOS, by entering your product details http://support.hp.com/in-en/drivers  Hope this helps ***If my post helped, click the White thumbs-up symbol to say thanks******Please mark Accept As Solution if my post solved your problem******Although I am an HP Employee, I am speaking for myself and not for HP***





I work for HP

Read other 1 answers
RELEVANCY SCORE 52

Hello Lenovo support, I just tried to update my BIOS on my Lenovo Z50, which has Windows 10. I chose the file this site said I just use, 9bcn91ww.exe, but when trying to install it I get the message:ErrorIHISI: Get support mode error in SMI!SMI Return Code: 0x45 Am I trying to install a wrong version or is it something else?

Read other answers
RELEVANCY SCORE 52

Motherboard:
PCCHIPS Model M810DLU (ver 5.2a)
BIOS:
AMI 62-1111-001131-00101111-040201-SiS740- M810D

I pulled this MB off my shelf of "projects". When I tried to make this work in the past, it always failed to boot. However, I discovered yesterday that 2 of my 3 Socket 462 "project" CPUs didn't work at all. #3 project chip - Athlon 2100+ does work.

So I put that project MB and project chip together, and the combo worked. I was able to boot from a live linux CD and from a Bart PE CD. That's the good news.

The bad news is that this combo - loaded with memory, video, drives, and any of 3 brand new 450W power supplies - occasionally fails to boot.
When it dies,

it's on one of the first 10 instructions
fails on POST Code 'dF'
resets the DRAM and CPU rates from 133 to 100 - changing my CPU from a 2100+ to a 1500+ -- PS: I know that an Athlon XP 2100+ actually operates at 1733Mhz

The Power Supply stays on and other MB accessories (CPU fan, drives as examples) continue to function. The video does not light up because it's too soon in the POST to display.

Normally that would be no big deal: look up the POST code and see where it failed. The problem is that I can't find any reference to a code 'dF' in any AMI or Award documentation or in the documentation available from PCCHIPS.

I've Googled terms like
+ pcchips + motherboard + m810d + "boot" + df
I've always gotten lots of hits, but nothi... Read more

A:Solved: Odd BIOS (POST) Error Code

Good Evening snorkytheweasel, I was just reading your post and the M810 looked familiar, quite coincidentally I have one in front of me right now. It is a M810LM slightly different but close.

It doesn't even post!

It did have an odd fail problem before it died. It originally had an Athlon in it.

I tried a Duron 1900 in it and it failed to work also.

I don't think this board is worth playing with further.

That hanging boot symptom is typical of a low 5 volt rail from the PSU.
One last effort may be tried by using a digital meter set to read a DC voltage higher than 10 volts and measuring one of the PSU drive power plugs between the red and black wires in a powered mode. That 5v is critical.

I have no idea what a df code is.

qldit.
 

Read other 3 answers
RELEVANCY SCORE 52

Hi

I've been recommended to update my bios (original threet http://www.techsupportforum.com/foru...ml#post7462354)

And this was a fatal mestake in my case. After the update i had problems to boot up again. At first it was error 32 on the motherboard debug panel. I removed all usb cables, and restarted couple of times, and eventualy it booted fine. I checked the bios, its version was the correct one (3.30)

But today i wasnt able to boot at all, first couple of tries was error 32 once again, than i removed all usb cables again. Still nothing. Support at Asrock mailed me that i should disconect all sata devices. So i did that, but after powering on the error changed to 00 and it remained this way no matter what i plug or unplug. Any help would be apriciated.

my mother board is Asrock p67 pro3 ( ASRock > P67 Pro3)
with procesor intel i5 2500k (no overclocking)

Read other answers
RELEVANCY SCORE 52

bios pasword error code CNU9333301V please....Spoiler (Highlight to read)  













Solved!

View Solution.

A:bios pasword error code CNU9333301V ,please

Hi, Enter  e9lofff136    ( 3rd character is a lower case L ) Regards, DP-K

Read other 4 answers
RELEVANCY SCORE 52

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers
RELEVANCY SCORE 51.6

I have forgot bios password for my g6 put password in 3 times system disabled shows error code 69177251













Solved!

View Solution.

A:Bios password blocked error code-69177251

Hi: Restart the PC and enter this unlock passcode... 76855897

Read other 5 answers
RELEVANCY SCORE 51.6

how to solved bios administrator password error code is I 93539648 in Notebook HP Pavilion - 17-g105 please help me

A:how to solved bios administrator password error code is I 93...

@Kecco Reboot when asked for the password enter   22491288 REO

Read other 3 answers
RELEVANCY SCORE 51.6

I've tryed taking the battery out and leaving it out to discharge the board which I was told that would take care of passwords that were stored. When I power it up and tap on f10 it goes into set up then instantly ask for power on password

Read other answers
RELEVANCY SCORE 51.6

We're planning to push BIOS updates to all our systems in the near future. However, in testing we've noticed that some systems will fail installation with error code 211. The problem seems to be related to a changed BIOS logo, since when ran manually, the updater asks if it should overwrite the existing logo or keep it. This seems to cause problems when you run the BIOS update executable "winuptp64.exe" with the "-s" (silent) argument.Is there a solution to this, like an argument that forces overwriting of logo or keep existing? Full error log:[2018/1/24 11:40:47] version 25.26
OS = Windows 10 64bit
Driver Loading....Done
System BIOS Version -> JBET54WW
Applying BIOS Version -> JBET66WW
Keep the custom start up image of the system.
System EC Version -> JBHT15WW
Applying EC Version -> JBHT17WW
AC adapter/Battery check....OK.

BIOS Flashing....
The number of retries of BIOS update = 1
The number of retries of BIOS update = 2
The number of retries of BIOS update = 3
Failed.
Error : Fail to do module option.

Error code = 211

Read other answers
RELEVANCY SCORE 51.6

i have a problem with my lenovo laptop G50 its a bios password i cant remember the password so i dont know if they is any way i can be helped with that and the other problem is that if tap three time its not bring any error code like i saw in the videos on youtube.
 
Mod's Edit: Additional information added to Subject line for clarity of issue and moved this post to its own thread.
 
 

A:G50 - Forgotten BIOS password / Obtaining error code

Welcome to the Lenovo Community !
 
Unfortunately there is no master password or magic back door which can be used to circumvent a forgotten BIOS password on a laptop. This protection scheme is due to the ease in which laptops are stolen every day. Your only solution is to try and remember the password you used.
 
Likewise removing the CMOS battery from the motherboard will NOT clear forgotten passwords on a laptop system. If you still can't remember the password then the alternative is to replace the motherboard.  Sorry.
 
What error code are you trying to obtain?
 

Read other 1 answers
RELEVANCY SCORE 51.6
A:Hi my error code for my bios hp mini laptop is CNU941B0CW

HI.  Please enter this code: E9lov3p1ed Regards.





? I do not work for HP, I volunteer.? To close the topic, check "accept as a solution" the correct answer or Thumb to say thank you.? I'm sorry but you do not answer questions privately.

Read other 6 answers
RELEVANCY SCORE 51.2

Had not used the notebook for a long time. When I tried to boot it up, a screen flashed up; it flashes up for too short a time to read properly but at the bottom, it gives F9 and F10 boot options but I could not get these to do anything. Then the screen goes to an "Enter CURRENT password" prompt. No HP or Windows logo at all. When the password is unsuccessfully entered 3 times, the following is displayed;  Password check failed / Fatal Error... System failed / CNU92032MQ and the only thing the notebook can do is be switched off, to repeat the same process. I tried removing battery and using the various the e9xxx passwords given on the blog, nothing has worked so far. (Is this a "Power On" or a "BIOS" password prompt?) Please help me recover my notebook. 













Solved!

View Solution.

A:Power On/BIOS password required, error code CNU92032MQ

Hi, Enter  e9lo71f745   ( 3rd character is a lower case L ) Regards, DP-K

Read other 4 answers
RELEVANCY SCORE 51.2

how to solved bios administrator password error code 51764946 for hp pavilion g6











Solved!
View Solution.

A:how to solved bios administrator password error code is 5176...

Thank u soooo much sir REO51ST

Read other 5 answers
RELEVANCY SCORE 51.2

I'm trying to Restore Corrupt BIOS On HP Pavilion Dv6 Via USB (windows 7)(based on this great website http://support.hp.com/us-en/document/c02693833?_sm_au_=iJVNRSL4Rk4sP3fj)Any ideas how to solve this are welcome! I downloaded the BIOS file from http://support.hp.com/us-en/drivers/selfservice/hp-pavilion-dv6-6000-entertainment-notebook-pc-serie... And when installing this file I get following error at step 2-7.first: IHISI: Get support mode fail in SMI!second:  BIOS did not support InsydeFlash! The files are partially installed of which a log indicating:"--- Log started: 2016/06/21 23:53:36Initializing...Log file : C:\SwSetup\sp51795\InsydeFlash.LogSettings file : C:\SwSetup\sp51795\platform.ini (found)Executable : C:\SwSetup\sp51795\InsydeFlash.exeVersion : 4.0.2.0 Build : InsydeFlashDate : Mon Sep 27 18:58:26 2010Resource file : C:\SwSetup\sp51795\iscflash.dll (loaded)App name : InsydesFlashOS Information : Microsoft Windows 7 Service Pack 1 - supportedPreparation stageIHISI Version : 193SMI_IsSupport failError code : 259(0x00000103)Cleanup StageStage Completed--- Log Stopped: 2016/06/21 23:53:39--- Log started: 2016/06/21 23:54:37Initializing...Log file : C:\SwSetup\sp51795\InsydeFlash.LogSettings file : C:\SwSetup\sp51795\platform.ini (found)Executable : C:\SwSetup\sp51795\InsydeFlash.exeVersion : 4.0.2.0 Build : InsydeFlashDate : Mon Sep 27 18:58:26 2010Resource file : C:\SwSetup\sp51795\iscflash.dll (loaded)App name : InsydesFlas... Read more

Read other answers
RELEVANCY SCORE 51.2

Need an unlock code for a CQ57. System disabled Code 87888256. any help would be appreciated. thank you!













Solved!

View Solution.

A:Bios password, System disabled error code- 87888256

@jtwingo Please reboot and enter           38780898 Regards.

Read other 2 answers
RELEVANCY SCORE 50.8

Hi,
Windows updates are not getting installed in one of  the Windows 7 Enterprise Edtion 32 bit machine. Downloaded updates and tried to install also did not install. I have followed few methods and it did not help. please help to solve the issue. 
Uploaded the Windows Update log in the 
https://1drv.ms/f/s!Aj2wii50lHANhHXE907VrpSPvHyb

Method 1
Executed the below command as administrator 
net stop wuauserv
ren SoftwareDistribution  SoftwareDistribution.oldd
net start wuauserv
Wuauclt.exe /scannow
wuauclt.exe /resetauthorization
wuauclt.exe /updatenow
net start wuauserv
Method 2
Executed the below command as administrator 
sc config winmgmt start= disabled
net stop winmgmt /y
%systemdrive%
cd %windir%\system32\wbem
ren Repository Repository.old
sc config winmgmt start= auto
net start winmgmt







Regards, Boopathi

Read other answers
RELEVANCY SCORE 50.8

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

Read other 6 answers
RELEVANCY SCORE 50.4

Purchased a Thinkpad T470 in June, 2017 from Lenovo US store. The laptop had been my daily driver for my works since then. Last week when I started to turn it on it didn't start-up. No boot screen or else. Instead it ended up with a weird musical beep tone. Later I googled it found and the term "Smart-beep". Eventually diagonalised with the Lenovo PC diagnostics app and the error was translated as Code: 10284- "TCG-compliant functionality-related error (might be the BIOS code validation failure)"- which tells that the severity is Informational. And also suggests to change the system board which might gonna be pretty expensive as I have no warranty left for this.   What to do with it now? 

Read other answers
RELEVANCY SCORE 50.4

Product: Pavilion dv5-2035dxOS: Dual boot Linux Mint 16 and Windows 7 Home 64-bit (no HP recovery partition)HP Recovery Disks: I have them but can't use them because the DVD laser doesn't work (CD only) Symptoms: While in normal use, screen suddenly had black and grey vertical linesAfter restart, computer turns on and fan runs, but screen is blackCTRL button flashes white light: 2 flashes, pause and repeat (BIOS corruption)Hello, I am trying to recover from BIOS corruption, hoping it's not a failing mobo. I downloaded the latest BIOS update for my system, but I can't get this file to install on an external USB using HP's instructions for restoring the BIOS. At step 1.11, I don't get the "HP System BIOS Update Utility" screen. Instead, I get this:   My questions:1. Is there any easy way to get this .exe on a USB? (I have tried 3 computers and 3 USB cards, so WTH?!)2. If not, can I just unpack it and create a bootable USB in another program by copy/pasting the BIOS file?3. Is there anything else I should try before flashing the BIOS??? Thanks in advance for your assistance. ^^   UPDATE: The "BIOS error" was actually the video card that failed due to repeated overheating. The repair shop replaced the video card and repaired the overheating problem (I didn't ask how), and my computer is as good as new.










... Read more

A:HP Pavilion dv5 BIOS corruption error code [DEAD VIDEO CARD]

For anyone who has a similar problem with their computer, my "BIOS error" (as coded by my computer's flashing lights) turned out to be a failed video card. The repair shop said this happens when computers overheat frequently, which mine often did. So, they changed the video card and fixed the overheating problem, and my computer is back in working order.

Read other 3 answers
RELEVANCY SCORE 50.4

Hi, new to forums! I got about 3-4 year old Pavilion dv6-2137eo. I was installing some updates, and then it suddenly stopped working. I got black screen and nothing else. And now, whenever i try to power on it, ok it starts, but then it flashes num and caps lock light 2 times, 2-3 secs and again 2 times. I know it means BIOS failure, but i don't know how to fix it. Anybody please help! Thank you!

A:Pavilion dv6-2137eo doesn't startup, BIOS error flash code

Hi there @Nuu5kamu1kkun3n?, Thank you for joining in on the HP Support Forums and Welcome! This is a great place to ask questions, find solutions and get help from others in the community! I read your post on the HP Support Forums. I wanted to reach out to you and help! I understand that you having an issue with blinking LED's on your HP Pavilion dv6-2137eo Entertainment Notebook PC.  Please note remove any and all USB devices. Disconnect all non-essential connected devices, as these, could cause some issues. Try to start your Notebook normally after you have disconnected everything. If that does not fix the issue, please continue with troubleshooting.  The next step would be for you to try to Restore the BIOS. You will see that the document says:  If the BIOS on your notebook becomes corrupted, such as from a failed BIOS upgrade or damage from a virus, the computer might show any the following symptoms: The computer displays the error message BIOS APPLICATION ERROR 501.The computer stops at a black or blank screen and it will not enter any of the Boot Options, such as the BIOS Setup Utility, Hardware Diagnostic Tools, System Recovery screens, etc.The computer does not boot and the Caps Lock or Num Lock LED blinks twice or the computer emits beep codes.The computer turns on, for example, the fan might spin, but there is no video on the internal display or external monitor and it does not boot into the operating sys... Read more

Read other 6 answers
RELEVANCY SCORE 50.4

I was messing around in my bios menu getting things set up how I prefer them and acidentaly set and forgot the power on password. Is there anyway I can get through this? I have read dozens of post and threads but none of the codes provided therein have worked for me. I look forward to hearing from you and thank you in advance.

A:Bios admin password lost for HP Stream Error code 50663152

Hi,Try: 45741194RegardsVisruth

Read other 1 answers
RELEVANCY SCORE 50

I made the Bios update as per the rules: connected to electric supply, battery full but unable to boot the Thinkpad anymore.Serial: PC0B4EK3, model: Furthermore, I introduced  twice a service support request as my Thinkpad is still under waranty to Lenovo Managed Technical Support Acceess under references 405PHZY and 405NS8D. I received replies from [email protected] but when I try to reply to those mails they all bounce back! Receiving: Error transferring to d06av21.portsmouth.uk.IBM.COM; Maximum hop count exceeded. Message probably in a routing loop.

 Reporting-MTA: dns;d06dbl038.portsmouth.uk.ibm.com

Final-Recipient: rfc822;<[email protected]>
Action: failed
Status: 5.0.0
Remote-MTA: smtp;d06av21.portsmouth.uk.IBM.COM
Diagnostic-Code: X-Notes; Error transferring to d06av21.portsmouth.uk.
IBM.COM; Maximum hop count exceeded. Message probably in a routing lo
op.Assistance would highly be appreciated!! 

Read other answers
RELEVANCY SCORE 49.6

I have about 15 laptops running Windows 7 Pro SP1 (brand new, just out of the box).  I've been able to install quite a few updates on about 3 of them (just started working on them).  However, now, I'm getting error code 80200011 when I attempt
to install additional "required" updates. 
I've tried clearing the BITS queue, deleting softwaredistribution folder and ran SFC and nothing came up as being an issue.  I've searched the net on this issue, but there doesn't appear to be much on this specific problem.  These systems
are behind a proxy server.  I have other (XP, Windows 2003) systems that are able to update, but is there an issue between WIn 7 and some proxy servers?  If so, why would I be able to install some updates?
Any help or suggestions would be GREATLY appreciated. Thanks all.

A:Windows 7 Pro - Windows Updates Error Code: Code 80200011

Hi,
Chek that your proxy is configured correctly, and if you can follow these steps to resolve this issue : stop the Windows Update service and make sure that the "Backround Intelligent Transfer Service" and "Cryptographic service" are started and then go to
C:\Windows and rename the software distribution folder to UpdateOLD , and finally restart the Windows Update Service


Oussama Oueslati | System Engineer | vNext Consulting

Read other 6 answers
RELEVANCY SCORE 49.6

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7
Greg

Read other answers
RELEVANCY SCORE 48.4

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

Read other answers
RELEVANCY SCORE 48

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

Read other answers
RELEVANCY SCORE 47.2

Hello,

Thanks for your time!

I apologize if this is the wrong place to present this!

Rescently, I found that there might be some BIOS code for an older motherboard at the following:

"BIOS updates are also available at Micro Firmware. Their internet address site is http://www.firmware.com/. You can also call them at 1 (800) 747-5465. "

Using the URL was useless plus any other URL links found on the Internet to a possible Micro Firmware web page was useless. Server off, site not found error messages.

Also, further information found on Micro Firmware is:

Micro Firmware
330 West Gray Street
Norman, OK 73069-7111 USA

Phone: 800-767-5465
Phone2: 405-321-8333
Fax: 405-573-5535

Using any of the phone numbers listed above is useless. No answer, fast busy tone, or recording that says "number is no longer in use".

This firm use to be readily available by phone but not so the last few days. And for how long I have no idea. So far I have not found any information on Internet searches, etc.!

Has the URL and phone number information changed or are they really out of business? Does anyone know the stauts of Micro Firmware?

Thanks for your time!

Jerry
 

A:A BIOS code firm for older obsolete code.

Read other 9 answers
RELEVANCY SCORE 46.8

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers
RELEVANCY SCORE 46.8

I had a lot of issues with the screen blinking/flickering on/off when removing the laptop from the WD-15 dock and read that the new BIOS upgrade would fix this issue so I went ahead and upgraded the BIOS.
I installed "DellDockingStationFwUp_1.0.0.8_20161220_WD15.exe" and "XPS_9550_1.2.21.exe".
I added Bitlocker protection the first thing I did when I got the laptop about a year ago and it has been working fine.
After this upgrade (with or without) the dock attached I get the Bitlocker code prompt at every start of the laptop.
I can't seem to roll back the FW upgrades as the installer tells me I have a newer version installed...

A:Windows 10 Bitlocker code required every time after BIOS upgrade on XPS 15 9560

After searching and checking I found that I no longer have any compatible TPM according to Windows.
(Win 10 Enterprise 64bit Build 14393)
Looking in the BIOS there is no setting for TPM anymore so then I found a way to rollback BIOS FW.
It was by shutting down, unplug the power plug and then keep CTRL+ESC pressed while plugging in the power plug. That brings up a prompt where I could do a rollback and after that tehre still is no TPM in BIOS. I run the same again but this time I chose to reset the BIOS settings, still no TPM!
I still have to give the Bitlocker key at every startup and to top it off the laptop no longer goes to sleep when the lid is closed, it shuts down even though the settings is to "sleep".
This of course means that every time I carry it around I have to add the Bitlocker key when picking it up.
Our corporate network requires Bitlocker so I can't use the laptop without bitlocker in the domain.
Any suggestions?

Read other 1 answers
RELEVANCY SCORE 46.4

Hi, I need to update the bios of  a B50-70 without windows.  I cant' lunch windows on because i've an acpi bios error and i think that the upgrade may resolve my problem.  Can you help me ?  I can't boot on window usb stick I've restore default setting  I've no issue ... can you help me ?  Thanks  Donovan   

Read other answers
RELEVANCY SCORE 46

Mod Edit: Moved from Win8 to the Am I Infected forum ~~boopmeI randomly decided to look at McAfee and check my settings, etc.  When looking at the main screen, everything states its on and green.  I had the most current definitions loaded.  When I checked my McAfee firewall it stated on.  When I clicked to go into the McAfee firewall, the screen then changed and said it was off.  When clicking the Turn On button, it would immediately shut off.  I searched this issue and the blogs stated to look at the Windows Firewall under Services.  When I checked, it was not there.  I did a Windows Search for it and found it.  When it opens it gives tells me I need to Update the Firewall Settings.  When I click on Use Recommended Settings it gives me an error "Windows Firewall can't change some of your settings.  Error Code 0x8007042c." I've checked out some of the blog discussions and followed a few thread about creating new register.bat files and running them.  I've also tried merging some .dll files also per the bloggers.  After doing these actions, the Windows Firewall now appears in my Services but when I click to start it I get the error "Windows could not start the Windows Firewall Service on Local Computer.  Error 1068:  The dependency service or group failed to start"

A:Can not start Windows Firewall - Error Code 0x8007042c and Error 1068

McAfee has verified I have a virus.  Will post in the Virus Forum.

Read other 15 answers
RELEVANCY SCORE 46

I was given an HP Compaq Presario C500 that was headed for the garbage because it would not connect to the internet. After running several scans ESET online scanner came up clean. Installed Microsoft Security Essentials and installed SP1, and can't get it to install SP2. I keep getting error code 80070017 / Windows Update encountered an unknown error.

I would prefer to reformat but Recovery Manager restarts back into Windows and I have no disks.

Can provide a long list of what has been done if needed including WU Modules (Normal Mode) and WU Components fixes. Permissions point in every which way but the correct way!

Any help would be much appreciated!

Free space is presently @ 42.3 GB of 68.9 GB on C: Drive (started out with 7.3 GB's free space! )
and 4.91 GB free of 5.53 GB on Presario_RP (D)

Specs as follows:
Vista Home Basic
Intel (R) Celeron (R) MCPU
[email protected] 1.60GHz 1.60 GHz
512 MB RAM
32-bit OS
Denied access to the CBS folder itself though can access CheckSUR.log which I am including along with sfcdetails.

=================================
Checking System Update Readiness.
Binary Version 6.0.6001.22375
Package Version 5.0
2010-10-04 19:57

Checking Deployment Packages

Checking Package Manifests and catalogs.

Checking package watchlist.

Checking component watchlist.

Checking packages.

Checking component store
Summary:
Seconds executed: 2478
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.224... Read more

A:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Dow... Read more

Read other 49 answers
RELEVANCY SCORE 46

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

Read other 1 answers
RELEVANCY SCORE 46

I have been having problems installing 8 updates since early May 2012. I am getting the error code in the title line.

The updates are:

[LIST][*]Security Update for Microsoft Office 2007 suites (KB2596672)[*]Security Update for Microsoft Office 2007 suites (KB2596792)[*]Security Update for Microsoft Office 2007 suites (KB2596880)[*]Security Update for Microsoft Office 2007 suites (KB2597162)[*]Security Update for Microsoft Office 2007 suites (KB2597969)[*]Security Update for Microsoft Office Excel 2007 (KB2597161)[*]Security Update for Microsoft Office Word 2007 (KB2596917)[*]Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687267)

I have run FixIt, but to no avail. I have also turned off services and rebooted and ran Windows Update and still got this error.

Do I need to just skip these updates, or somehow troubleshoot this and fix it. If I need to fix it, I need help.

Regards, and thanks.

Read other answers
RELEVANCY SCORE 46

Help I need assistance solving this problem.

When installing Windows 2000 setup copies the initial files to the hard drive and then restarts to begin the 1st stage of setup.

The system begins the startup process by "Loading the Windows Executive" At this point setup stalls and gives the following message:
"Setup cannot load ntkrnlmp.exe the error code is 16"
This error is duplicated in different releases in win2k from the beta 3 to the final releases.

Please assist, respond to [email protected] or ICQ 1937432
 

Read other answers
RELEVANCY SCORE 46

Windows 8, "File: \BCD Error Code: 0xc0000034"


Good Day Everyone,

Trying to resolve this error:



I have a Window 8 recovery USB and a Windows 8.1 recovery USB both from another laptop...

Mine are 32 bit machines, if the laptop i am working on is 64 bit will it boot on my USB recovery that is from a 32 bit machine? My buddy doesn't know if this troubled laptop is 32 or 64 bit

When I use the recovery usb and try a refresh or a comlete format it comes back telling me the drive is locked and stops in its tracks.

Also from a the dos command window (from the recover usb advanced option section) i have tried the following with NO success...

Bootrec /fixmbr - successful but didn't help
Bootrec Fixboot - successful but didn't help
Bootrec - RebuildBCD - Goes off searching, comes back with 1> C:windows, I type Y to add it but it comes back with an error "The requested system device can not be found"

I also tried BCDboot c:\windows\ /s c: /l en-us - said it was successful but still didnt fix the boot problem.

So i am not sure if I am running into a 32 bit vs 64 bit issue or if i need to find a way to unlock my drive so the refresh will work?? Or...?????

Any help or direction would be greatly appreciated!!

This is on an Acer Aspire V3-551

Regards,
Darren Vaillant

A:Windows 8 -Boot Error -> File: \BCD Error code: 0xc0000034

Anyone???

Read other 2 answers
RELEVANCY SCORE 46

after my windows 10 auto updating is interrupt, my computer IE can't to open any wed site, it can't open EXCEL, but i use google chrome seems as normal, meanwhile my computer will show the error message c:\windows\system32\msvcr120.dll had some problem,
error code:  Oxc000012f.  my computer each time auto updating windows 10, it will be held as it show 88% updating. Please help to advise me how to solve these problem.
Thanks.

Read other answers
RELEVANCY SCORE 46

When i try to install my windows update, i always get both error code 800F0900 and 800B0100. i tried installing the updates manually, used MS Fix it and the system update readiness tool. I use sfc /scannow and it says "No integrity violations found". Still error. Can anyone help? I have uploaded my CBS zipfile to googledrive CBS.rar - Google Drive. (Since datahost is not working.) and attached the sfc text file overhere.

I have tried Windows Update Troubleshooter then tried windows update again and a new error Code 80246007 appear.
Hope you guys can help me solve it.

This is my Farbar scan.

Farbar Service Scanner Version: 26-07-2015
Ran by Finance Server (administrator) on 19-09-2015 at 17:00:41
Running from "C:\Users\Finance Server\Downloads"
Microsoft Windows 7 Ultimate Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************

Internet Services:
============

Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.


Windows Firewall:
=============

Firewall Disabled Policy:
==================


System Restore:
============

System Restore Policy:
========================


Action Center:
============


Windows Update:
============

Windows Autoupdate Disabled Policy:
============================


Windows Defender:
==============
WinDefe... Read more

Read other answers
RELEVANCY SCORE 46

When i try to install my windows update, i always get both error code  800F0900 and 800B0100. i tried installing the updates manually, used MS Fix it and the system update readiness tool. I use sfc /scannow and it says  "No integrity violations found". Still error. Can anyone help? I have uploaded my CBS zipfile to googledrive http://tinyurl.com/ogyfd3y.(Since datahost is not working.)  and attached the sfc text file overhere.
Hope you guys can help me solve it
 
This is my Farbar scan.
 
Farbar Service Scanner Version: 26-07-2015
Ran by Finance Server (administrator) on 19-09-2015 at 17:00:41
Running from "C:\Users\Finance Server\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************
 
Internet Services:
============
 
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
 
 
Windows Firewall:
=============
 
Firewall Disabled Policy: 
==================
 
 
System Restore:
============
 
System Restore Policy: 
========================
 
 
Action Center:
============
 
 
Windows Update:
============
 
Windows Autoupdate Disabled Policy: 
============================
 
 
Windows Defender:
==============
WinDefend Service is not running. Checking... Read more

A:Error code 800F0900 and 800B0100 windows update error

Please download and run the Windows Update Troubleshooter.
 
Clicking on the link above will start the download automatically.
 
Please post the results in your topic.  Do not use a host website to post this.  If the information needs to be downloaded I will not do this.  I will not download anything to my computer unless I know exactly what it contains.

Read other 5 answers