Over 1 million tech questions and answers.

Windows 7 Printer Issue

Q: Windows 7 Printer Issue

Hello,

We have a W7 printer issue as follows: My wife and I both have W7 Home Premium, 64bit, machines networked together. She has an HP PhotoSmart 7600 printer. I can see it and print to it from my network connection. I can print plain paper or photo paper from my machine. My wife however can only print plain paper from her machine. She cannot print pictures. We went through the driver replacement/refresh recommended by HP and rebooted the machine. It immediately recognized the printer as an HP PhotoSmart 7660.

I can print fine from my machine over the network but she still cannot print pictures. Anybody have any ideas?

RELEVANCY SCORE 200
Preferred Solution: Windows 7 Printer Issue

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Windows 7 Printer Issue

The HP Photosmart 7600 series printer has 2 models:

7655

7660

You apparently have the latter model.

The "solve a problem" and "How to" sections may be helpful to you.

-----------------------------------------------------

Read other 1 answers
RELEVANCY SCORE 46.4

on windows 8 client machine usb printer driver needs to install everyday after every reboot

Read other answers
RELEVANCY SCORE 46.4

I can't seem to find anything about my specific problem. I had an HP PSC 2410 all-in-one series printer connected to a Dlink print server. The printer started making terrible noises when it started up, so I disconnected it and reconnected an old deskjet instead. I recently fixed the all-in-one (turned out i just needed to clean the scanning glass and mirrors), but the print server no longer powers up. Now here's the real issue:

I can't get the printer to install locally via USB port. I was finally able to delete the network printer (it kept coming back after reboot, offline), but I can' get Windows to auto-detect and install the drivers. I can't even download the drivers from the HP website because they aren't available (windows update only). I can't manually add the printer either, because the virtual USB port is unavailable. I'd really like to get this printer running again, especially because I brought it back from the dead and I really need to scanner. Any help will be greatly appreciated.

Read other answers
RELEVANCY SCORE 46.4

The printer is an old HP LaserJet P2015 connected to a Windows 7 Pro (32-bit) machine.  Every morning, when the user boots the computer up and logs in, that printer will show as an unknown device under Devices and Printers.  The actual printer
icon for the P2015 will be grayed out.  If you just turn the printer off and back on the unknown device goes away, and the P2015 icon will go back to ready.  I have tried multiple USB cable and ports on the computer and a powered USB hub.  I've
tried multiple drivers, and the only one that really wants to work is the actual HP driver for the P2015 (which took a while to find).  The HP universal print drivers all have their own quirks with it.  I've adjusted power setting for maximum efficiency,
ran sfc /scannow, ran chkdsk /r, and some other things that I cannot remember.  Is there anything I can try that I didn't list?

Read other answers
RELEVANCY SCORE 46.4

In device manager my printer, HP Laser Jet 1320 is "working properly" but it doesn't show in printers and faxes. Has anyone had similar issues in windows 7? Regards, Max.
 

A:Windows 7 printer issue

hi have a look here http://social.technet.microsoft.com/Forums/en/category/w7itpro/
 

Read other 1 answers
RELEVANCY SCORE 46.4

Ok I have an HP deskjet 3520 that is hooked into my FreeBSD server. The FreeBSD is all good and not one problem there. Now the problem is trying to get it to use on XP sp2 boxes. I can not see it in network places and I have tried to add it via local port method that has worked before but it says my local port is access denied. How do I turn it on?
 

Read other answers
RELEVANCY SCORE 46.4

on windows 8 client machine usb printer driver needs to install everyday after every reboot

Read other answers
RELEVANCY SCORE 46

I have a 2 Zebra Label Printers (2 models) that is shared on two separate computers (both with XP) on our networked that is pushed out to all the other computers on the network via group policy on the server (Server 2003). One of these printers will push out to the Windows 7 machine but the other one will not. If you try to add it manually the printer is listed as one of the network printers however it will error, saying it cannot make a connection with an error code of 0x0000007a. Anyone have a solution on how to remedy the problem?
 

Read other answers
RELEVANCY SCORE 46

I have a weird one that I am hoping someone can assist with,

Background Info ? 4 PCs and 3 Printers in office all Windows 7 ? One PC acts as Print Server and shares the TWO of the Three printers using Windows Homegroup. Third Printer is direct connected via USB to Bosses PC.

Problem ? On Bosses PC only ? All Shared Printers will just go offline. It is not a network issue or homegroup issue as she (the boss) can see other homegroup resources such as shared drive and Shared folders. It appears to happen after she prints to her USB printer then tries to go to a shared printer. (This is my guess, Not tested and verified).

Other Info ? No one else in office has this issue, Boss will not give up her USB printer(it is old but reliable for her), A restart of her machine sometimes fixes the problem but not always.

I am truly at a loss any help or work around would be appreciated.
 

A:Strange Issue with Printer and Windows 7

In an office environment, I would do away with printer sharing and simply place all of the printers on the network. Then you don't have to deal with Windows glitches and conflicts.
 

Read other 2 answers
RELEVANCY SCORE 46

Do you know if Windows 7 is compatible with Dell's 922 AIO printer? I cannot get it to fully install and print, either with the CD that came with the printer or by downloading from the Dell's web site...Please help my Mom!! Thx
 

A:Windows 7 compatibility printer issue

Looks like its not compatible. See here -> http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?type=Hardware&s=922%20AIO

You can use the Windows 7 Compatiblility web site to verify software & hardware.
 

Read other 3 answers
RELEVANCY SCORE 46

Well after spending about 20 hours of my life on researching this problem online and trying all kinds of "fixes" I am turing to this board for help.

I have a Gateway FX 6802 - 64 bit computer running Windows 7. Brand new - purchased 2 months ago. I also have an Epson 1280 printer which I have had for years. When I initially set the computer up, I just plugged in the printer via USB and it found the drivers and worked. No issues. Epson doesn't have drivers for the 1280 for Windows 7 anyway...but I had 2 months of no issues.

A few days ago, I noticed when I went to print something from my Microsoft Home and Student Word 2007 program, it wouldn't print. It said my print spooler was not on. I researched and went through the steps to get it back on, and to clear out ther files in my system32/spool/printer folder and then turned it back on via services.msc. Here is the strange part.

I can print any Word docs that I created previosuly within the past 2 months, or docs I created prior to getthing this computer. No problem. I can print photos. I can print PDF files. The only time I run into an issue is when I go into Word 2007 to create a new doc. It won't print. It shuts the spooler off. I'll have the print spooler window open and I will watch it - once I hit the print button in a NEW document - it changes status from started to stopped. Then, I have to clear out the printers folder in the system32/spool/printers which will contain 2 files usually named something such as... Read more

A:Windows 7 Printer Spool Issue - PLEASE help.

Hey Robsmail,
That is a nasty problem.

If you have your Office installation disk, try repairing or reinstalling MS Word. It might have just been a bad install.

~Lordbob

Read other 4 answers
RELEVANCY SCORE 46

Hello,

I have just installed Windows 7 pro on my older computer (PCi slots only). I have an HP IIIp laserjet that I have used reliably for many years - love the quality of print. It has a parallel port connection to Mobo.

I have installed the updated drivers and computer recognizes it but when I direct a job to it , it just briefly turns on the receipt light then does nothing. I then have to go to the printer and cancel the print job.

Does this mean I have to abandon this jewel? (No support available form HP)

Thanks for looking at this post.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , Service Pack 1, 32 bit
Processor: Intel(R) Celeron(R) CPU 3.06GHz, x86 Family 15 Model 4 Stepping 1
Processor Count: 1
RAM: 2030 Mb
Graphics Card: NVIDIA GeForce 8400 GS , 512 Mb
Hard Drives: C: Total - 953869 MB, Free - 552302 MB;
Motherboard: Intel Corporation , D865GVHZ , AAC72419-110 , FCHZ55303878
Antivirus: CenturyLinkô Online Security 9.01, Updated and Enabled
 

A:Windows 7 issue with old HP IIIp Printer

Read other 7 answers
RELEVANCY SCORE 46

Hi,

I have recently upgraded my system from windows vista to windows 7. Everything seems to work fine except the printer - Dell all in one printer 922. To solve the issue, I have followed several solutions from different forums. For e.g., according to one solution (this solution seemed sensible), I have deleted the printer from my system, uninstalled all the printer driver software and have tried to use the vista 32 drivers to get my printer working. But all in vain. I have tried the process almost ten times now and I am tired. That's why I have come to this forum. Please could any one of you help me resolve this issue. Thank you in anticipation.

Chai

A:Windows 7 - Dell aio 922 Printer Issue

I had the same problem with my Dell AIO 964... Try downloading the the Patch/Upgrade .Zip file from the Dell website. When it finishes downloading open it and run the DellCleanUpUtility.exe this will delete the driver that Windows 7 automatically installed. When the Utility completes it will ask to reboot, allow it do so, then procede to install the windows vista version of your printer driver from the Dell website. Cho Yung Tea

Read other 5 answers
RELEVANCY SCORE 46

I recently completed a build using Windows 7 and everything went fine except I am having a fit with my HP 1018 laserjet printer. When I try to send something to the printer it takes at least 30 minutes before it actually prints. I have visited HP's website and downloaded the driver that is supposed to work with this printer and Windows 7 but still no luck. Any words of wisdome would be greatly appreciated.
Steve
 

Read other answers
RELEVANCY SCORE 46

Hello all!

I just installed the RP and loving it. The only issue I have is that I cannot set my default printer! The option isnt even available when you right click the printer. I know from experience, if you are logged in as a temp profile, you cannot perform any actions such as this. I think I might BE logging in with a temp profile, but under users it shows my name, and administrator so Im confused. Any ideas??

A:Default printer issue with Windows 8

Where are you right clicking? You have tried Control Panel - Devices and printers?

Read other 7 answers
RELEVANCY SCORE 46

I had a problem with my HP printer not scanning via the wireless network even thought it did in the past. I could print wirelessly. The ADD/REMOVE program wouldn't allow me uninstall it came up with an installation error when trying to do so.I then went onto a HP forum to try and get help and was directed towards deleting the HP files and downloading the HP driver from scratch. Afetr manually deleting the HP folders/files and downloading the relevant full HP driver I now get an installation error when trying to install the printer. I am now at a point that the PC doesn't even recognise the printer on the network and I can't install the driver. Is this something to do with the ADD/REMOVE program not being able to uninstall properly?
 

A:Solved: Windows XP/Printer Issue

Trying to remove a program manually is always a bad idea. You can never find everything that needs to be removed, especially in the registry. The only thing it will accomplish, is prevent further installation of the software.

If the software is still showing inside "Add or Remove Programs" chances are you might be able to remove leftovers with the free Revo Uninstaller, but I wouldn't bet on it. Still worth a try though.
 

Read other 3 answers
RELEVANCY SCORE 45.2

I got a new laptop loaded with seven. I have an older HP7150. New pc runs 64 bit, printer 32. When I plugged in printer, it loaded "sometype" of driver that said it would work. Well, it sorta does and don't and for the most part, it jams up, feeds through unprinted paper and etc. Upon further reading I found where 32 bit devices do not work with 64. So, I called HP and they provided a little free help and I took it, up to the point where they wanted $$ for there help. So, what I did find out that by going to command prompt and typing driverquery that I do not have any type of 7150 driver. By going to the HP does not offer a 64 bit driver for seven, only for vista. Hmm, thought I'd give the vista driver a whirl...and this PC is so smart, in will not unload the driver. It just comes up with a message and says something like..."it's been determined that the driver you are already using, is better than the one that you want to use". Hmm, so can somebody please tell me, where I can find an actual driver that will work, that I can download to say, my thumb drive, that I can actually locate and installed in the printer properties? Thank you
 

A:Solved: printer driver issue w/windows 7 pro

Read other 8 answers
RELEVANCY SCORE 45.2

Hi all,
Hoping someone out there may be able to help with the following.

I have a Canon MG8250 all in one printer/scanner. All was fine on Windows 8, but then upgraded to 8.1 a couple of weeks ago. Just got round to using the printer and scanner and the printer wouldn't work (scanner was fine). Uninstalled MP drivers and reinstalled from Canon site and all seemed fine with the printing. Alas the scanner now would not work. Did the same, uninstalled MP Navigator Ex and reinstalled from Canon site, but no fix this time. PC says "Cannot start MP Navigator Ex" and printer says "Set PC to start scanning".

Anybody know how to fix?

Thanks,
Peter

A:[SOLVED] All in One printer issue with Windows 8.1 update

Hi and Welcome to TSF!

You are using software and drivers for Windows 8.1?

Read other 5 answers
RELEVANCY SCORE 45.2

I have a 2 Zebra Label Printers (2 models) that are shared printers on two separate computers (both with XP) on our networked that are pushed out to all the other computers on the network via group policy on/print management on the server (Server 2003). One of these printers will push out to the Windows 7 machine but the other one will not. If you try to add it manually on the Windows 7 machine the printer is listed as one of the network printers however it will error, saying it cannot make a connection with an error code of 0x0000007a. Looking in Print Management on the server the printer that does push out is on the list of printers and the that does not push out is not, even though it is listed in the list of printers under printers and faxes. This printer has added to deploy under group policy though and still does not push out to the Windows 7 machines but will to all our XP machines. Anyone have a solution on how to remedy the problem?

A:[SOLVED] Windows 7 & Network Printer Issue

Are you specifically using a driver designed for Windows 7 on the Win7 machines? By default, the print server will push out the driver installed to the client when first connected, so if the driver being used is for XP or 2003, it may not work properly under Win7. That error message means "ERROR_INSUFFICIENT_BUFFER", which would indicate a driver issue indeed.

Read other 2 answers
RELEVANCY SCORE 44.8

Recently got a new laptop (with windows 10) and switched to cable internet.
My printer says it is connected to wifi, my laptop is connected
I can only print if it is connected with a cord

someone said it could be a windows 10 issue??

my printer is a brother mfc-j875dw

HELP greatly appreciated!!!
 

A:Brother printer not printing wifi - windows 10 issue??

Hi and welcome!
I found these steps from Brother's support section of their website.

1. Turn off your Brother machine. Wait a few seconds, then turn it on again.
Wait at least three minutes for the machine to join the network.
If the issue continues, go to STEP 2.

2. Use the Network Connection Repair Tool to fix the Brother machine's network settings. It will assign the correct IP address and the Subnet Mask.
> Click here to see how to use the Network Connection Repair Tool
If the issue continues, go to STEP 3.

3. Check your machine's wireless status by printing the WLAN report.
> Click here to check the wireless status on the WLAN report.

If your WLAN report is stating "Connection OK", although you can not print, refer to "Check the wireless status on the WLAN report" and check "Connection: OK"
 

Read other 1 answers
RELEVANCY SCORE 44.8

Hey,
During the phase of printer installation when the software asks to plug in the printer, windows popped up and asked it I wanted it to find software for the printer. I accidentally clicked the option where windows wouldn't bother with the printer (I forget how it was phrased exactly), and now the actual installation software wont detect the printer.

Anyone have any idea how I can make windows refind the printer?

I'm running Vista 64-bit. Thanks much!
 

A:Issue with installing printer - accidentally set windows to not detect it

Check Device Manager (Start->Run-> Devmgmt.msc) for any yellow queried devices (ie your printer specifically)
Then right click on it and select remove (it may say Delete or Uninstall)
Then restart, and try installing again
 

Read other 3 answers
RELEVANCY SCORE 44.4

Solved issue about sharp AR M-236 in Windows 8. I've been trying to connect to a shared printer on an OS running on Windows XP. No drivers were given for Winows 8. The first thing to do is disabling driver signature in Windows 8 that is given as default:
Disable Driver Signature Verification

Then you have to install the driver (depending on 64-bit or 32-bit architecture):
http://www.tradenet.sharp.co.uk/file.../ARM236664.exe
http://www.tradenet.sharp.co.uk/file.../ARM236615.exe

During installation you will be asked to specify whether the printer is shared or directly connected. Choose shared and then specify the canonical windows path, for example:
\\John\SHARPAR-236

where John is the computer where the copier Sharp Ar-m236 is installed and working...

Hope it helps

Read other answers
RELEVANCY SCORE 44.4

Hi,
Not really sure where to post this question so if there's a better forum just let me know.
We bought a new HP Color LaserJet Pro M452dn printer and I set it up today.  Installed it on my printer server and set it to deploy using group policy.  Seems to be working fine on our Windows 7 desktops but I have a Windows 8.1 workstation and
it isn't deploying.
Since it is the day after patch Tuesday I decided to run Windows Updates and interestingly enough the printer shows up as an Important Update.  Ok, so I tell it to install but it fails with an error code of 80070490.
Searched for help with that error found a few suggestions, running sfc and dism, but so far none of that has helped.  I also tried deleting the port thinking since I had used it in the past it may need to recreate it, didn't help.
So I'm stumped, I've rebooted the computer dozens of times, even turned it off for a while, no help.  I even manually installed the printer to see if having the drivers pre-loaded would help but it didn't.
Any suggestions?  Anyone run into this issue before?
Thanks in advance,
Linn

Read other answers
RELEVANCY SCORE 44.4

My new windows 7 computer is a dell package from staples. It's an Inspiron 660, 3 ghz, 4 megs ram, 64 bit, intel pentium processor. It's running Windows 7 Home edition. It's on a 'workgroup' network with two xp machines, one of which shares data files that reside on the win7 machine.

My usb receipt printer is an Epson tm-u220D. This printer is not plug and play, so the driver had to be downloaded and force fed. No problem there really; after a few tries we got the printer to print a test page and the accounting software (Bottom Line Accounting) seems to recognize it fine.

This setup is used as the cash register in a retail store, and prints receipts for customers on paper rolls.

Here is the minor glitchy problem - when we print a receipt it prints fine, but then we can see the red error light on the printer start flashing, and the next receipt won't print until we switch the printer off and back on. Also we see a local downlevel document in the queue that goes away in about a half minute whether we turn the printer off or not, and it instantly disappears if we do turn it off.

It's gonna be a pain to switch the printer off and back on between every two customers.

Surely there is an easy fix for this problem - any printer experts out there? Thanks in advance!

A:Printer issue w win7 and usb receipt printer, local downlevel doc ?

bump

Read other 4 answers
RELEVANCY SCORE 41.6

Hello i Have the above problem while I try to share a printer on a domain network.
My windows firewall (localy) is also damage, is that the problem that I have to solve first?

Windows 8  - cannot share a printer error message appears "[Window Title] Printer Properties  [Main Instruction] Printer settings could not be saved.  There are no more endpoints available from the endpoint mapper.   [OK]

A:Windows 8 - cannot share a printer error message appears "[Window Title] Printer Properties [Main Instruction] Printer settings could not be saved. There are no more endpoints available from the endpoint mapper. [OK]

You may need to reinstall the printer. Remove the printer driver from Control Panel\Programs and Features, then add the printer from Devices and Printers.

Please note that if the printer driver is not in the list in Devices and Printers, I suspect that the printer is currently not compatible with Windows 8. In this case I suggest you contact the printer manfuacturer for more information.
Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 5 answers
RELEVANCY SCORE 41.6

Hi all. Sorry if this is in the wrong place, but I did not see a dedicated printer sub-forum, and I didn't see a search link either. Why no search?

Anyway, I have Vista Ult 64 SP1 on one or my machines. I have an HP Photosmart printer, and it works fine. Here are two things I have Qs about:

1) I do not see the printer in the D.M. Shouldn't it be there?

2) When I boot the computer, spoolsv.exe is running (as it should be) but the mem usage is very high - almost 11,000k. If I go to services.msc, switch the service to disabled, stop the service, switch it back to auto and then start it, the spoolsv.exe mem usage is at 1,200k. When I reboot, the mem usage reverts back to 11,000k. There are no jobs in the print que (that I can see), so I am wondering why it is so high when I boot.

Thanks in advance.

A:Printer and printer service issue

Hi,

I'm not sure but my service is at 16k & then drops to less than 1k.

Read other 4 answers
RELEVANCY SCORE 37.6

I have a HP office jet v40 connected to a XP pc. I recently added a W7 lap top to my home network. I have the printer added on the W7 pc, but I can not print to it. Shows items spooling, but nothing prints. I tried updating the drivers, but HP says the W7 has the drivers needed. The lap top is accessing my network thru a wireless router, just FYI. Can you help? Thank you.

A:printer issue

Hi there,

There are some links in my signature FAQ area below, but here's another tutorial that may be of help: Share Files and Printers between Windows 7 and XP - the How-To Geek

Cheers,

Walker
Windows Outreach Team

Read other 2 answers
RELEVANCY SCORE 37.6

I have added some shared printers on my win2k server to a few workstations. On one workstation, I added the printers (after typing in a valid username and password for the server), and they showed up as "ready". I printed a test page, etc. Every time I reboot, the printers all read "access denied, unable to connect". Please help.
 

A:printer issue

You might want to check Permissions for the printers

Open the Printers folder from the Start Menu, or from the Control Panel.

Right click the printer in question, and choose Properties.

Click the Security tab to view the current permissions.

You can add or remove user accounts in the upper section, and/or highlight the user in the upper section, and change the permissions in the lower section.

Click OK
 

Read other 2 answers
RELEVANCY SCORE 37.6

I have not been able to get my Toshiba laptop running XP Home to communicate with the HP 812c printer as long as it was connected via my USB hub and not directly to the laptop. I was advised to buy an AC-powered USB hub, so I got the Belkin F5U237v1 with 7 ports. Same problem. Everything else (external HDD, mouse, keyboard, scanner, thumb drives, etc, all work great, but the printer just prints garbage - usually a few jumbled characters on a page and will keep chewing up paper until I turn it off and clear the queue. HP was no help. After seeing that their recommendation for an AC-powered hub didn't work, they advised me to just plug it back into the laptop directly and be done with it. The system recognizes the printer when I connect the USB plug and power it up. How do I diagnose this?
 

A:Printer Issue with USB Hub

The post quoted before caught my eye becasue I have exactly the same problem with my euipment, except that I use an HP 990cxi. So, thinking it was something addressed on these forums, signed up to enjoy the reply.

Did anything come of this query, I would be most interested in knowing how to solve this problem,


Rupert



Quote
I have not been able to get my Toshiba laptop running XP Home to communicate with the HP 812c printer as long as it was connected via my USB hub and not directly to the laptop. I was advised to buy an AC-powered USB hub, so I got the Belkin F5U237v1 with 7 ports. Same problem. Everything else (external HDD, mouse, keyboard, scanner, thumb drives, etc, all work great, but the printer just prints garbage - usually a few jumbled characters on a page and will keep chewing up paper until I turn it off and clear the queue. HP was no help. After seeing that their recommendation for an AC-powered hub didn't work, they advised me to just plug it back into the laptop directly and be done with it. The system recognizes the printer when I connect the USB plug and power it up. How do I diagnose this?
Unquote
 

Read other 7 answers
RELEVANCY SCORE 37.6

Canon pixma mx740 has stopped printing from computer Windows 7 . 3 documents are in que and there is ink.. able to copy a document directly. power source works.
 

A:Printer Issue

howdy and welcome, I'm going to move this to the hardware forum as it's not a tech tip or review.

thanks,

v
 

Read other 2 answers
RELEVANCY SCORE 37.6

I had an old HP printer so added a parallel port PCI card to my system. The printer shows up as a choice when I go to print. The printer however does not show up under devices and printer folder. I am trying to remove the printer from the system and from showng up as an available printer when I go to print.

A:Printer issue

Type services in search

In services look for bluetooth, and set to automatic. I know this sounds crazy, but it works 9 out of 10 times. Unfortunately, you may be number 10. With an old printer it may not employ blue tooth technology. But give it a shot.

Read other 5 answers
RELEVANCY SCORE 37.6

When I print a receipt from a merchant on the net, it first prints out all these symbols and small sentences that make no sense to me before it actually prints the receipt. It does it for some merchants but not all. Is this with the merchant or is it a printer setting? Any and all help would be appreciated.
 

A:Printer issue.

Read other 6 answers
RELEVANCY SCORE 37.6

For some reason on my wife's account or profile on Vista, the printer icon is not in the task bar and sometimes does not work. It works on my profile, what are we doing wrong?
 

A:Printer Issue

It could be any number of things with the details provided. So we will have to whittle down the possiblities by trial and error until a solution is found.

I am a bit confused by what you wrote. You said that the icon is not in the taskbar and sometimes does not work. What does not work? The icon or the printer?

And since it sometimes does not work, when does it work?
 

Read other 1 answers
RELEVANCY SCORE 37.6

Hi,

I have a new laptop ith Vista installed and all windows updates.

I am trying to install a HP 5552 printer that HP assures me needs no drivers and is litteraly plug and play. Sadly this has not happened and the PC does not prompt with a new hardware found warning.

I have manually installed using the generic vista drivers and now when print is pressed the printer comes to life but the job never prints and the printer dialog displays "out of paper" needless to say lots of paper and no jams!

I have tried deselecting the use "advanced printing" option but to no avail.

Any help greatly appreciated!

Thanks

Tom
 

A:HP Printer issue

Read other 9 answers
RELEVANCY SCORE 37.6

#Hi,

I have a new laptop ith Vista installed and all windows updates.

I am trying to install a HP 5552 printer that HP assures me needs no drivers and is litteraly plug and play. Sadly this has not happened and the PC does not prompt with a new hardware found warning.

I have manually installed using the generic vista drivers and now when print is pressed the printer comes to life but the job never prints and the printer dialog displays "out of paper" needless to say lots of paper and no jams!

I have tried deselecting the use "advanced printing" option but to no avail.

Any help greatly appreciated!

Thanks

Tom

Read other answers
RELEVANCY SCORE 37.6

I've hooked up an HP Business Inkjet 2250 to my PC. Printer was working fine, has been in storage (unused) for about 1yr. Works fine, prints fine except not in black - all other colors but basic blk. Tried new ink cartridge, no luck. Cleaned driverhead, no luck. Ideas? Thanks!
pmk099
 

A:printer issue

HP Business Inkjet 2200/2250 Printer Series

-----------------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 37.6

I'm running multiple printers two of which are WF7110 printers only. They have been running side by side both with CISS Systems one pigmented ink the other sublimation ink. The pigmented recently decided it can only print through paint. Epson blames Adobe PS and the computer. I say it a setting issue gone array the same print job sent to the Dye Sub printer prints every time. Here is what happens:
1. Send a print job to the printer.
2. Print carriage releases from the docking station and the sheet of paper is drawn up.
3. The carriage holding the ink cartridges move to the center freezes and then my error message is a paper jam

This only happens with jpeg images any other print job sent prints without any issues.
along with the utility you requested I sent you two files one is a copy of the printer network status and the other an image of the ports

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 4
RAM: 8108 Mb
Graphics Card: Intel(R) HD Graphics 4400, 1024 Mb
Hard Drives: C: 930 GB (759 GB Free); G: 31 GB (25 GB Free); H: 100 GB (86 GB Free); I: 45 GB (40 GB Free); J: 97 GB (95 GB Free);
Motherboard: Dell Inc., 02YRK5
Antivirus: Windows Defender, Disabled
 

Read other answers
RELEVANCY SCORE 37.6

I have a HP laserjet 4014dn. Only when I print large reports, I get a little bit of black residue on the edge of the paper. I just replaced the maintenance kit, but it only helped alittle. Any suggestions on how I can get rid of it?
 

A:Printer issue

Not sure if this will help, but maybe cleaning the drum may help? http://www.ehow.com/how_4811815_clean-printer-drum.html
 

Read other 4 answers
RELEVANCY SCORE 37.6

I am having a problem with my printer. There appears to a doc is stuck in the printers spooler and I get an error saying something is wrong with it. I uninstalled and reinstalled but I am having the same results. Any idea how I can fix this? The printer is an HP PSC 1410v.

thx

edit: it's coming up saying "the RPC server is unavailable"

A:Printer issue.

Hello bruinator. I had have my spooler stuck, and with time, many headaches and never sure why, the problem was fixed. However, surfing trough internet I found a solution. It's a batch file, that basically, executes command line codes relationed with the spooler.
It's easy to create:1) Copy this code on the notepad or another text editor:

net stop spooler
del %systemroot%system32spoolprinters*.shd
del %systemroot%system32spoolprinters*.spl
net start spooler
2) Then save this document with the name you want and then write .bat just beside it. Example: name.bat
Or download the file here ----> Spoolerfix.bat

When you have the spooler stuck, just run this batch file and it will clean the spooler and will then let you print your documents.

Hope it helps .

Read other 9 answers
RELEVANCY SCORE 37.6

I bought this HP 1108 printer a few years ago it worked fine on my Windows 7 computer until yesterday then no response I am a newbie please help.

Read other answers
RELEVANCY SCORE 37.6

My H-P Printer generates blank pages when I attempt to print off NYT crossword puzzles.
The same has happened with the daily USA Today puzzles.
Have been printing these puzzles for several months with no problems.
No problems printing anything else. Any ideas? (H-P Officejet 6310 All-in-One)
 

A:H-P Printer Issue

You didn't say which Windows version your computer is running.

If it's running Windows Vista or 7 or 8, use its built-in Snipping Tool to capture and save those puzzles so you can print them off.

--------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 37.6

New to w7.
I installed a printer a week ago. Everything working fine for me. But printer not reconized by other user account.
What must I do to correct this problem?

A:printer issue

Sounds like you need to set permissions to allow other users access.
If you could fill out your system specs and tell us what make and model the printer is we could be a little more detailed with some help.

Read other 3 answers
RELEVANCY SCORE 37.6

Ok so here it is:

I have a Canon iP1700 which actually has Windows 7 drivers avilable. The printer works... kinda.

Whenever I print from Windows' Picture Printer wizard menu, you know the one that lets you print many pictures and lets you choose the sizes, the pictures come out very washed out.

This only happens from the Picture printer wizard thing. I can put those pictures in Word or something and print them out that way just fine.

Anyone have any idea what this could be?

example(left is from word, right is from wizard menu):

A:Yet another printer issue : )

I don't have or use Wizard, but is there some sort of adjustment, to save ink, when printing, etc. If so find it and adjust it.

Read other 2 answers
RELEVANCY SCORE 37.6

Hi, and thank-you for taking the time to read about my printer issue. This has become a true headache for me and any insight would be very much welcomed. I have used this site a couple of times in the past, and my issues were resolved. Fantastic resource indeed!

I have an Epson Stylus Photo 820 Ink Jet Printer (Yes, it's old) and I am running Win-XP Home (SP3)

Yesterday I attempted to print something, and the page came out completely blank. Not even the slightest mark on it. These are old ink cartridges, which were unopened and stored in shrink wrap until a few months ago. When I initially put them in, they worked fine.

I did use the Epson cleaning utility and used the clean option several times. I also removed the two cartridges and cleaned each ink nozzle using a Q-tip and some rubbing alcohol. I also used a small amount of warm water, gave them a vigorous shake and replaced them. Still not even a trace of ink on the paper when I tried to print again. There was, however, ink on the heads of the Q-tips.

I went ahead and opened up another shrink wrapped set of cartridges and tried those. These cartridges are expired by several years too, however they have been sealed and shrink wrapped. (Bought for cheap on eBay). After I replaced both cartridges I got the same results. I removed the two (replaced) cartridges and repeated the same thing as with the others. I manually cleaned them; used the head cleaning option with the Epson utility and still nothing.

When I atte... Read more

A:Printer Issue

Read other 8 answers
RELEVANCY SCORE 37.6

Hello,

I have installed a HP Laser Jet printer in one of our windows 2000 Machines and shared it ,We have some machines running win98 and Windows 2000 all connected to the same switch.

The problem is win 98 machines cant access the printer that keep asking for password thou I gave the correct password it says wrong username and password. Also we have some windows 2000Mechines connected to the same switch cannot access the printer in user mood but it allows to print in admin mood.

is there any softwares that can be over come this problem

Rimzan
 

Read other answers
RELEVANCY SCORE 37.6

Why would a printer print okay to tray two then all of a sudden not be able to change in properties to tray two. This is weird! Was working fine up until two days ago.
 

A:Printer Issue

Read other 6 answers