Over 1 million tech questions and answers.

Help with BSOD error, windows crash at start-up

Q: Help with BSOD error, windows crash at start-up

Need help with a BSOD error that is crashing my PC. Computer hadn't been used in a few days, but it started fine. After a few hours of idle time, I started iTunes and it was syncing my iPod. During this time, I started Nero, as I was going to burn a CD. I then loaded a blank CD, once that happened, the PC crashed.

Computer boots fine and I can get past login screen. After it logs-in, the start-up items begin to load, but then it crashes and the BSOD error appears. The following is shown:

"stop 0x0000008E (0xc0000005, 0x806FF94F, 0xB7FsDB18, 0x00000000)"

I can boot into safe mode. So far I've done the following, but it continues to crash:

1. tried system restore in safe mode, but system restore fails
2. used msconfig and disabled all items on the "startup" tab
3. disconnected all USB devices
4. used Memtest, all three sticks passed
5. ran WD diagnostics on C drive, drive passed

In safe mode, I checked the event manager, the only unusual item was an "SPTD" error. When I check on the error, it says "EventID 4 - driver detected an internal error in its data structures for."

I also checked the device mananger, the only unusual thing was a generic storage volume that was listed in the storage devices. It seems to be associated with my HP printer which as memory card slots. But I don't recall seeing a generic storage volume in Device Manager.

Any ideas on what my next step should be.

RELEVANCY SCORE 200
Preferred Solution: Help with BSOD error, windows crash at start-up

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Help with BSOD error, windows crash at start-up

Read other 11 answers
RELEVANCY SCORE 63.6

Hello everyone I have been trying to fix my PC for the last two weeks. I've tried everything. Windows clean install a bunch of test on my hard drive. I've checked S.M.A.R.T done an 9 hour memtest and I;ve finally given up. I honestly don't know what to do this is a fairly new build done in June. I have the DM log files please anyone this is getting out of hand.
P.S I made this thread on my computer but when I am loading for a game or in the middle of a game computer gives me 0x000000F4 error no idea what it is :/ so far its only happened on league of legends.

Read other answers
RELEVANCY SCORE 58.8

Had my system for a while. recently upgraded all my drivers due to issues with bsods and crashing ive seen. ran maleware bytes, did scans from my iobit advanced system care.   took apart and blew out my computer. etc etc. done a few things all in the attemtp to try and get my computer back to normal running and have no sucess. i did run a memory diognostic and it says there was some memory issue's but i wasnt sure as to what to do next.
if anyone could help i would be theroughly apreciative.
as for what some of my problems are.
Random blue screen of deaths. with what look's to be rainbow-ish screen tearing right before (video card issue?)
some program fail to start. or while starting Crash/crash while useing them.
some programs that have NEVER had issue's suddenly  become unusable due to above reasons even after sucessfull reinstall's.
*edit:1*
another issue though uncommon is Explorer.exe fails to work and needs to restart it's self.
 

A:Random Bsod's, programs failing to start/crash/bug crash etc

You need to replace the ram.

Read other 1 answers
RELEVANCY SCORE 56.8

at first i thought it was just me not having a genuine windows 7 in the first place but i did buy windows 10 and i got a key and the same error has been happening over and over
the BSOD keeps coming up with 

KERNAL_AUTO_BOOST_LOCK_ACQUISITION_WITH_RAISED_IRQL

 
 
tell me if you see anything wrong (mostly space
Specs
OS: Windows 10 Pro
Ram: 8GB
HD: 1TB
Processor: Intel i5 4670k @ 3.4 ghz
Graphics: GeForce 750 ti
?'s may be answered
x64
Windows 7 Ulitmate Original Install (wasn't genuine)
Windows 7 Ultimate Original
1 year and a quarter
1 day (windows 10)
motherboard (will find out)
Custom built
desktop

A:WINDOWS 10 CRASH FATAL ERROR/BSOD!!!!! HELP!!!!

First question is how did the Win7 install become legitimate?If the hacked version is still present this could be causing problems. Your UEFI/BIOS (version P1.30) dates from 2014.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  If you are able to install the update through Windows (without booting from an external drive), then go ahead and update it.  WARNING - if the computer might shut down during this procedure, please don't do it, as this may physically damage the computer and prevent it from booting.The WER section of MSINFO32 blames your wireless drivers.  Let's see what the memory dumps have to say.....The memory dumps blame it also.  It dates from 2011, so it's likely not compatible.Go to the manufacturer's website and download the latest, Win10 compatible driver and install it.If a Win10 driver isn't available, you may try a Win8.1 driver (and run the installer in compatibility mode) - but there's no guaranty that it'll work.Worst case - remove the wireless card software, then physically remove the device from the system.If you must have wireless, then invest in a wireless card that's certified Win10 compatible. If this doesn't fix the BSOD's, please run Driver Verifier according to these instructions:  http://www.carrona.org/verifier.htmlGood luck! Analysis:The following is for informational purposes only.[font=lucida console]***********************... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

Hello everyone,

I have recently dual booted my pre installed Windows 8 edition alongside Windows 7 Ultimate Edition on my laptop. I have solved the driver problem I had posted in a different thread on 8 Forums, but today a new problem came up. I was on my Windows 7 OS, when all of the sudden my screen blinked on and off for 5 seconds, and then when it was restored, there was a message from Windows Action Center saying that the display driver had crashed and then recovered. One minute later, my whole OS crashed with a BSOD, saying that the display driver had crashed and not recovered. I am currently using my Windows 7 in safe mode with networking. I do not have the error code from the BSOD, but I do have the diagnostics and dump files!

Thanks.

A:New Here... BSOD Error Crash on Windows 7 Ultimate x64

Hi.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Report us for any BSOD after doing it, following the Blue Screen of Death (BSOD) Posting Instructions.

No need to create new threads, upload the data in your reply post.

Read other 4 answers
RELEVANCY SCORE 56

Hello,
I'm having a problem with my computer. I built it myself and overclocked it not too long ago maybe about 5-6 months ago. It passed all the stress tests fine when I overclocked and it was running great but after about 2 weeks later it started to bluescreen once in a while and since then it's been bluescreen. I noticed that when it's cooler in my room, it doesn't bluescreen as often but usually it bluescreens ones a day. Before it displays the BSOD, it freezes for about 10-15 seconds then BOSD shows up. Now for some reason its not creating the error log in minidump folder. I even have the correct settings but it still doesn't create the logs. So I decided to take a picture with my cell phone. It does blue screen even if I'm not playing any games. I'm using h60 water cooler and I got i7 2600K overclocked to 4.6. Any ideas? Please help because I cannot figure out what the problem is.

Thank you in advance.

A:BSOD Random Windows 7 Crash, error 0x00000124

The stop code 0x124 is normally indicative of hardware failure, there is not much information that it provides, but I can tell you right now from the sounds of things it is being caused by your overclocking and is likely crashing so hard that it does not have time to generate the needed dump files. Chances are all you need to do is stop over clocking and return your system to its normal speeds to rid yourself of this problem.

Read other 1 answers
RELEVANCY SCORE 52.8

Firstly, thanks for running this site and I hope your experts can help.

Last week one of my machines started crashing randomly. The screens just go black, almost like it is in sleep mode, but nothing but a reboot will wake it up. I get no BSOD but I think something is up because when I reboot it asks if I want to boot into SAFE mode. I have zipped up the files as instructed in a HOW TO thread here, but since I really don't ever see a BSOD I'm wondering if you want to see those files.

Please advise further.

Thank you in advance.

R

A:Where to start - crash but no BSOD

Welcome to SF, RLH. First, please complete your System Specs.

Go ahead and place the zipped file here.

After that, boot into safe mode. Do you have any crashing there?

Did this problem suddenly occur? If yes, did you install any new hardware or software prior to the crashes?

I doubt it's a sleep mode issue, but you can always disable sleep mode, going to power options. At least for testing purposes.

Read other 7 answers
RELEVANCY SCORE 52

My Windows Vista (64-Bit) just recently started crashing with a Blue Screen of Death while starting up. After the BSOD, My windows restarts and attempts to repair, and when it can't, I have to resort to system restoring. The weird thing is...it sometimes can't repair or system restore and goes into a cycle of BSOD crashes, but at other times it just lets me through and I can start up (like rite now it started up okay after 2 cycles of BSOD).
My windows is fully updated, I scanned for viruses and malware with McAfee Security Center(Full System Scan), and also ran a MacAfee QuickClean and TuneUp Utilities 2008 1-Click maintainance as well as a TuneUp registry cleaner scan (All after the BSOD crashes). MacAfee and TuneUp 2008 correct a few problems and clear some space every time I run, and the virus scan always comes up clean. I've been looking for solutions to my problem but can't find an answer. I also ran a hardware diagnostic and all my hardware (ram, GPU, CPU, etc.) seem to be working fine.
Can someone please help me with this issue. I'm actually scared to turn off the computer right now in fear of the dreaded BSOD followed by system restore (lol). My crash dump info is listed below when using Windows Debugger Tool:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (100... Read more

A:Vista Crash (BSOD) on Start-Up

Read other 13 answers
RELEVANCY SCORE 52

My Windows Vista (64-Bit) just recently started crashing with a Blue Screen of Death while starting up. After the BSOD, My windows restarts and attempts to repair, and when it can't, I have to resort to system restoring. The weird thing is...it sometimes can't repair or system restore and goes into a cycle of BSOD crashes, but at other times it just lets me through and I can start up (like rite now it started up okay after 2 cycles of BSOD).
My windows is fully updated, I scanned for viruses and malware with McAfee Security Center(Full System Scan), and also ran a MacAfee QuickClean and TuneUp Utilities 2008 1-Click maintainance as well as a TuneUp registry cleaner scan (All after the BSOD crashes). MacAfee and TuneUp 2008 correct a few problems and clear some space every time I run, and the virus scan always comes up clean. I've been looking for solutions to my problem but can't find an answer. I also ran a hardware diagnostic and all my hardware (ram, GPU, CPU, etc.) seem to be working fine.
Can someone please help me with this issue. I'm actually scared to turn off the computer right now in fear of the dreaded BSOD followed by system restore (lol). My crash dump info is listed below when using Windows Debugger Tool:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (100... Read more

A:Vista Crash (BSOD) on Start-Up

Please do not start more than one thread for the same problem.

Closing duplicate.

Please continue here:

http://forums.techguy.org/windows-vista/749546-vista-crash-bsod-start-up.html#post6128673
 

Read other 1 answers
RELEVANCY SCORE 52

Hey,

My month and half old Acer V3 started to give BSOD's, did some sort of recovery and started working again for a couple of hours, if not trying to access any Windows files. If tried to look up error logs etc it gave different versions of the BSOF. So I tried to run Recovery, getting it back to factory settings, and that's when Windows crashed completely. I followed Acer customer support advice, ordered recovery discs (couldn't create one because Windows crashed when trying it. I got the recovery discs, ran the recovery which ended up giving me failure because of "missing image-something". Another call to Acer and they told to run different recovery version from the puter.

That recovery end to a failure again. After several restarts and what not, windows started up again, being slower than usual. I'm now having constant problems losing internet connection, I've had couple minidumbs and several issues with windows updater and such and these after machine should be back in the factory settings. Anyhow, here's the last log if anyone could take a look on it before I throw this machine to the wall.

A:BSOD and total windows crash and recovery crash/failure

For starters:





At work we start all repairs with a set of diagnostics. Often they find problems that weren't even expected. It's a waste of time to try to fix software on a system that has hardware problems.
Please try these free diagnostics for starters: Initial Hardware Diagnostics
Also, please ensure that you have ALL available Windows Updates (it may take several trips to get them all).



In particular, start with the hard drive diagnostics as I suspect that is the problem.

Although there's only 2 memory dumps (it usually takes 4 or 5 to conclude if it's a hardware error or not) - the repeated failure of factory installs makes a hardware failure the most likely problem here. Please run the diagnostics that I suggested above and let us know the results.

There are a list of drivers that need updating (because the recovery media was made a while ago). Don't worry about them until you've finished the hardware diagnostics. If all the diagnostics pass, then update the drivers.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

NTIDrvr.sys Mon Apr 19 21:39:04 2010 (4BCD05B8)
NTI CD-ROM Filter Driver by NewTech Infosystems (likely a part of Acer Empowering Technology)
http://www.carrona.org/dr... Read more

Read other 5 answers
RELEVANCY SCORE 51.6

I have Vista with current updates. This computer has been solid for years, but all of a sudden it's crashing. I don't recall installing anything lately and I restored it to an earlier date. I scanned for viruses and malware, did driver updates but it's still crashing. It will crash about 3 - 5 mins after start-up.

Thanks in advance for your help.

Marty

A:BSOD 0x0000000A crash 5 mins after start up

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

Make sure your dump logging is enabled.
Click Start, point to Settings, and then click Control Panel.
Double-click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Check Write an even to the system log, and Automatically restart.
In the Write debugging information list, click Small memory dump (256k).

Location of Dumps:
C:\Windows\minidump

Read other 7 answers
RELEVANCY SCORE 51.6

Hello everybody,

Can anyone help with BSOD crash that I am having. I have attached the minidump below. I did not do anything unusual-do not seem to remember adding hardware or software..but I see a blue screen as soon as the boots up completely and Windows 7 loads. BTW, I have a gateway sx2840-01 with a i3 and 6gb ddr3 ram and 1Tb hdd.

Please help.



Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88005B0D5C0
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\051610-59732-01.dmp
C:\Users\Keerthi\AppData\Local\Temp\WER-102757-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD crash after start up- minidump attached-please help

  
Quote: Originally Posted by sthentu


Hello everybody,

Can anyone help with BSOD crash that I am having. I have attached the minidump below. I did not do anything unusual-do not seem to remember adding hardware or software..but I see a blue screen as soon as the boots up completely and Windows 7 loads. BTW, I have a gateway sx2840-01 with a i3 and 6gb ddr3 ram and 1Tb hdd.

Please help.




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88005B0D5C0
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\051610-59732-01.dmp
C:\Users\Keerthi\AppData\Local\Temp\WER-102757-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt



These were both caused by ksecdd.sys which is part of win 7.

I would run a system file check to repair it
(type cmd in search>right click and run as admin>sfc /scannow)

Let us know if you need help

Ken



Code:
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed May 12 21:00:42.826 2010 (GMT-4)
System Uptime: 0 days 0:01:04.371
BugCheck 1E, {ffffffffc0000005, f... Read more

Read other 9 answers
RELEVANCY SCORE 51.6

Hi

Searched everywhere I can think of, and now I think this is the only solution. To ask here.

I have starting to not coming into win at all, it start to "starting/loading Windows" then it goes
into blue screen. This are the two latest codes:
1: 0x000000c9 (0x0000023b, 0x93ff237c, 0x99d00e28, 0x00000000)
2: 0x000000c9 (0x0000023b, 0x93fef37c, 0x99d42e28, 0x00000000)

It has being one other, but I manage to loose that one.

This started one week ago, tried many different thing. I have disconnected everything at the machine.
Like USB, wlan (USB), IR link, USB drive and USB hub. Tried to just use one of the RAM modules, and changed to see if it was a failure on them, but not as far I can tell.

I have run`d check disk at all the drives, takes a long time. But no errors.
I then activated the driver check tool inside windows, son`t remeber what it is called right now.
After this, I could not get in to windows at all, start load, then blue screen all the time.

The only thing I can come in to windows it with safe mode, without network. With network it restarts by
itself.

Here is the file from the programa SF Diagnostic Tool: Link
And here are the latest memory dmp (in root of windows folder): Link

Hope this is the info needed, and hope someone please could help me.

Kindly Petter

A:BSOD starting Windows, error: 0x000000c9 Can`t start Windows.

"I then activated the driver check tool inside windows"
=>how did you do that if you're unable to get in windows?

Read other 9 answers
RELEVANCY SCORE 51.2

Gentleman,

I am not computer savvy when it comes to these sorts of things.
The heading states it all and am wanting a bit more of an insight
at any problems that may be occurring etc.. Also, as of late I have
noticed that my DVD player refuses at times to read a DVD movie
or game title, and only after a few open / closes it seems to work.

Please find attached my Windows_NT6_BSOD_jcgriff2I for more
information. I look forward to your response to my query above.

SYSTEM SPECIFICATION:

- x86 (32-bit) or x64 ? Windows 7 Home Premium 64 bit
- the original installed OS on the system? As Above
- an OEM or full retail version? Retail Version
- What is the age of system (hardware)? Four Years
- What is the age of OS installation Four Years

Regards

Joshua Dennison

A:Unexpected BSOD error message on Windows start up

Analysis:avast!:Your crash indicates avast!. It may be corrupted and causing issues. Please remove it:Start your system in Safe Mode if you are able to do so...
Use the avast! uninstall utility to remove avast!...
Restart your computer...
Ethernet Driver:Your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC driver is out of date and may be contributing to the crashes. Update it after downloading the update from your motherboard support site.

Read other 3 answers
RELEVANCY SCORE 51.2

Hi all,

Just found this forum, looks great and populated.

Anyway, 2 days ago I transferred all my data from external HD to my CP (those files where not there yet) because I wanted a back-up.

That same day my comp suddenly started to act weird: many installed software programs I couldn't find, or were listed in Program files, but only consisted the link to the manufacturers' website. And my Avast stopped working: "Cannot find ...\Avast5\VisthAux.exe".

So I decided to install HijackThis (some may know that program here I hope) which is needed to upload in another forum for mods there to review and advice upon), but to no avail yet.

Also, I cannot start HijackThis, and also not as Moderator!

I never had this before, and I desperate for a good advice or fix. Thanks a lot for your efforts before!!!

dude

A:No BSOD, but crash: software missing, cannot start in Adminmode etc

Hello HeatoftheNight, welcome to SF!

We might need a little more info.... what did you do exactly? Sounds as if you MOVED instead of COPY the files.
If so... A COPY back might help.

Please goto start|type MSINFO32 |choose export to txt etc and upload the result?
Also please complete system specs?

We'll go on from there...

Read other 9 answers
RELEVANCY SCORE 51.2

Hi, I have just had my Windows 7 64 bit BSOD (Blue Screen Of Death).

I used chrome yesterday morning, the 1st time, it was fine for about 30 mins, then crashed, I had the laptop restarted. The 2nd time, it crashed right after i started and turned to blue screen error, same as the 3rd time. This is my .dmp files. Maybe someone can analyse it and find the faulty driver or something?

Thanks very much, in advance,
Kiet.

Read other answers
RELEVANCY SCORE 50.8

Hi guys.

First off..I am sorry if this has been posted before. I have seen it on Google with different suggestions that people said didn't work.

I don't have my computer to work on so I have to use my work computer to type this.

Last night I started my Toshiba Windows & laptop and it went to the screen that says that Windows failed to start. A recent hardware or software change might be the cause..

Options of Launch Startup Repair (recommended) vs Start Windows Normally are given.
I use the first option and it ends up with a black screen and a bigger than normal white arrow cursor that responds to the mouse and that's it.

I use the second option that shows the Windows logo loading up normally then right to the BSOD.

I went to safemode and turned off the auto restart. To summarize, the error message in the BSOD said Unmountable_Boot_Volume.

At the bottom it said STOP; 0X000000ED, (0xFFFFFA8004C86CD0, 0XFFFFFFFFC0000185, then two 0xlots of 0's repeated twice.

I tried to go to a previous restore point with no luck

I saw that there was a BSOD help section but didn't know how to use it since I can't get my laptop to start.

I would be grateful if someone knows where to direct me or any advice or if any additional information is needed.

Thanks!
Mikeinstlouis
 

A:Windows failed to start...A recent hardware error. BSOD

Give this link a read---> How To Fix Unmountable Boot Volume STOP: 0x000000ed Let us know how things go!
 

Read other 3 answers
RELEVANCY SCORE 50.8

My sister's Dell desktop got the New Win31 virus(?) recently and I told her to try follow a Malware/virus cleanup on another forum. She started to go through the steps, but after she did the Msconfig and rebooted, she couldn't log back in to her account. It went to a window that asked for a login name and password, which we don't have because we never put passwords for our separate accounts.

So now, we try to search on how to bypass that window and login somehow, and read on another site to try Safe Mode. Unfortunately, now we're getting a blue screen saying,

"STOP: c000021a (Fatal System Error) The windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000). The system has been shut down."

I've tried the F8 at start up and going under Last known good configuration, but it doesn't help. So now we're stuck with the computer starting up and just going straight to the blue screen. Is there something that we can't do to fix it? We have a reinstallation CD for Microsoft Windows XP Home Edition SP2, but I don't know what to do with it and I'd like to fix the computer without erasing all the other information if possible.

I'm at a lost and my sister doesn't know anything about computers, so any sort of help would be much appreciated. Thanks in advance.
 

A:Windows XP Won't Start Up, BSOD: Fatal System Error Message

Looks like a repair is needed, If that works you'll still have your data...The 3rd link below is where you are headed. Read thru and understand..There are other places that decsribe this proceedure also.

How does System restore work
http://www.microsoft.com/windowsxp/u...emrestore.mspx
Windows XP Recovery Console
http://support.microsoft.com/kb/314058
How to Perform a Windows XP Repair Install
http://www.michaelstevenstech.com/XPrepairinstall.htm
 

Read other 1 answers
RELEVANCY SCORE 50.8

Hi guys. First off..I am sorry if this has been posted before.  I have seen it on Google with different suggestions that people said didn't work. I don't have my computer to work on so I have to use my work computer  to type this. Last night I started my Toshiba Windows & laptop and it went to the screen that says that Windows failed to start.  A recent hardware or software change might be the cause.. Options of Launch Startup Repair (recommended) vs Start Windows Normally are given.  I use the first option and it ends up with a black screen and a bigger than normal white arrow cursor that responds to the mouse and that's it. I use the second option that shows the Windows logo loading up normally then right to the BSOD. I went to safemode and turned off the auto restart.  To summarize, the error message in the BSOD said Unmountable_Boot_Volume. At the bottom it said STOP; 0X000000ED, (0xFFFFFA8004C86CD0, 0XFFFFFFFFC0000185, then two 0xlots of 0's repeated twice. I tried to go to a previous restore point with no luck I saw that there was a BSOD help section but didn't know how to use it since I can't get my laptop to start. I would be grateful if someone knows where to direct me or any advice or if any additional information is needed. Thanks!MikeinstlouisEdit: Topic moved from Windows 7 to the more appropriate forum. ~ Animal

A:Windows Failed to start..A recent hardware.....error. BSOD

Boot into Safe Mode with Command Prompt.
 
Open the Command Prompt and type in bootrec /fixboot.  Please notice the space between the bootrec and the /fixboot.  Now press Enter.
 
Reboot to see if this resolves the issue.

Read other 11 answers
RELEVANCY SCORE 50.4

Hi,

I've been having Kernal data inpage error which I assume is from a faulty harddrive (or maybe the RAM?!). I occasionally get a disk check during bootup, which didn't seem to help. I was saving up to buy a hybrid SSD/HDD drive before replacing it, but now it seems a bit too late.

Yesterday after a windows update, I rebooted my computer and the desktop was running very slow, nothing would open, explorer.exe would crash, I would be stuck in desktop until I force shutdown by holding the power switch (Shutdown didnt work), after doing this once or twice, I now get a BSOD again with a registry error right after the desktop loads for 1-2 seconds. X051 error code I think.

What step should I take now to diagnose the problem?
Thanks!
 

Read other answers
RELEVANCY SCORE 50.4

I was checking the weather this morning and my computer purple screen-ed and turned off. Now it will blue screen constantly on start-up unless I go into safe-mode. I... may of accidentally deleted something in frustration earlier that allowed my computer to even blue-screen.. So any help on to why this is happening, please and thank you!

A:Checking a website and purple screen crash, then BSOD on start-up

So I've tried to do a disk check up, updating my drivers, and rolling back my graphics card... No luck, can I get some help please?

Read other 9 answers
RELEVANCY SCORE 50.4

Hi,
I need your help, got startup problem like in title. Computer works, but when I tried to reboot, the BSOD comes out and I must start system using my backup file. Please help or comments. I don't know how to change that driver file or disable it. I think it may works..
Thx for everything

A:BSOD when start windows, error 0x0000006b,caused by driver ntoskrnl.ex

Blue Screen of Death (BSOD) Posting Instructions

Read other 6 answers
RELEVANCY SCORE 50

Hi all,

I've got a real problem on my hands with my acer laptop. Every time I boot it up, it comes to the screen where it says that Windows encountered a problem. It then asks me to chose whether to boot windows normally, or in safe mode etc. I have chosen all of the options and the outcome is always the same. The windows boot screen appears normally and then a BSOD flashes up very quickly, (I am unable to read what it says) the laptop then restarts and continues in this cycle.

I have tried inserting an XP pro disc on which I have tried to access the recovery console. It reaches a certain point and then restarts automatically with no warning whatsoever. I have tried various other recovery discs that all work for a few minutes at best but then the laptop just shuts itself down.

I have tried using an ubuntu livecd which works fine, but I really need XP and some of the documents on it.

If anybody could help I would be really grateful.

Thanks,
Rick.

A:- Automatic BSOD crash at boot - Continuous start-restart cycle

Well the existance of an Ubuntu Live disk red-flags the possiblity that your Linux Grub is ultimately the source. I had this situation and had to do a completely New Install as support for XP from Linux people is non-existant in fact they will laugh in your face.



Only it's not funny...

I just re-read your post. Please pay close attention to the Recovery Console options and try it again, as you should be able to boot to this no matter how corrupt the HD software is.

If you REALLY can't get there, then I would be thinking hardware problems and not software. So then if the Ubuntu is working, that sort of indicates the hardware is GOOD, which is a pickle, for sure.

<looks for a pickle icon ...>

Hmm . . .

Okay, here's my thought.

Download & install the HD utility software for your particular HD. All the manufacturer's make this available on their web-site's Support section and run the utility to make sure the stinkin' HD is good (or find out maybe it is BAD, only Ubuntu doesn't know it yet . . .)

Also, maybe the Utility can FIX whatever is wrong.

If the HD turns out to be good, then I don't know what's next. Maybe the HD cable, the CD/DVD device or maybe even HEAT. Is your CPU fan clean & spinning really, really fast ?

Or Power Supply maybe. How old is it, what is it's wattage and is it a good one or a cheapie no-name ?

Hay ever-body ! Come help this guy; this one sounds FUN !!!

Read other 1 answers
RELEVANCY SCORE 50

Hi all,

I've got a real problem on my hands with my acer laptop. Every time I boot it up, it comes to the screen where it says that Windows encountered a problem. It then asks me to chose whether to boot windows normally, or in safe mode etc. I have chosen all of the options and the outcome is always the same. The windows boot screen appears normally and then a BSOD flashes up very quickly, (I am unable to read what it says) the laptop then restarts and continues in this cycle.

I have tried inserting an XP pro disc on which I have tried to access the recovery console. It reaches a certain point and then restarts automatically with no warning whatsoever. I have tried various other recovery discs that all work for a few minutes at best but then the laptop just shuts itself down.

I have tried using an ubuntu livecd which works fine, but I really need XP and some of the documents on it.

If anybody could help I would be really grateful.

Thanks,
Rick.
 

A:Automatic BSOD crash at boot - Continuous start-restart cycle

Welcome to TSG....

Use the Ubuntu live to back up all of the important data and laptops are usually special tyoes of computers and take a bit more work to do a clean installation than a desktop. Make sure you have all of the recovery disks including the special driver disk if you do not have this one call the manufacturer of the laptop and order a complete new recovery disk set for your computer. Also while talking with them have them get you a guide on how to re-install Windows on this laptop. The on-line thru email should be able to give you this.

Question can you get into windows at all to do anything even for a short period of time?
 

Read other 1 answers
RELEVANCY SCORE 49.6

I attempted to start my computer this morning and I could not get past the windows logo. The monitor would go black and then I would be on a windows error screen asking me to do startup repair. When attempting this, I would be prompted to do a system restore which would give me the error "The instruction at 0xfba9584d referenced memory at 0x00000008. The memory could not be read." After being stuck in this loop of windows crashing for a while, I disabled windows restarting on crash and received the BSOD with the error message mentioned in the title. This is a similar problem to this post: "http://www.bleepingcomputer.com/forums/t/444580/stop-c0000135-the-program-cant-start-because-hs-is-missing-try-resintalling-the-program/." I scanned my disk with FRST from a flash drive and received this log. No addition.txt was created though. I have seen the missing file errors but want to know exactly what scripts to enter into the FRST tool to fix this issue. Thanks!
 
Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version:13-08-2015
Ran by SYSTEM on MININT-RIPUNJA (13-08-2015 18:09:42)
Running from e:\
Platform: Windows 7 Home Premium Service Pack 1 (X64) Language: English (United States)
Internet Explorer Version 11
Boot Mode: Recovery
 
Default: ControlSet001
ATTENTION!:=====> If the system is bootable FRST must be run from normal or Safe mode to create a complete log.
 
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-... Read more

A:Windows cannot boot correctly, BSOD Error STOP: C0000135 The program can't start

Greetings ptarafdar and to BleepingComputer's Virus/Trojan/Spyware/Malware Removal forum.My name is Oh My! and I am here to help you! Now that we are "friends" please call me Gary.If you would allow me to call you by your first name I would prefer to do that.===================================================Ground Rules:First, I would like to inform you that most of us here at Bleeping Computer offer our expert assistance out of the goodness of our hearts. Please try to match our commitment to you with your patience toward us. If this was easy we would never have met. Please do not run any tools or take any steps other than those I will provide for you while we work on your computer together. I need to be certain about the state of your computer in order to provide appropriate and effective steps for you to take. Most often "well intentioned" (and usually panic driven!) independent efforts can make things much worse for both of us. If at any point you would prefer to take your own steps please let me know, I will not be offended. I would be happy to focus on the many others who are waiting in line for assistance.Please perform all steps in the order they are listed in each set of instructions. Some steps may be a bit complicated. If things are not clear, be sure to stop and let me know. We need to work on this together with confidence.Please copy and paste all logs into your post unless directed otherwise. Please do not re-run any programs I suggest. If you encounter probl... Read more

Read other 57 answers
RELEVANCY SCORE 49.6

See below Mongo db error log.  Could this be related?

2018-12-05 22:59:22.5294 4872 1234 Error [CommandWireProtocol`1] MongoDB.Driver.MongoCommandException: Command collStats failed: Collection [ATA.ServiceInstalledEvent_20180608051637] not found..
   at MongoDB.Driver.Core.WireProtocol.CommandWireProtocol`1.ProcessReply(ConnectionId connectionId, ReplyMessage`1 reply)
   at async MongoDB.Driver.Core.WireProtocol.CommandWireProtocol`1.ExecuteAsync[](?)
   at async MongoDB.Driver.Core.Servers.Server.ServerChannel.ExecuteProtocolAsync[](?)
   at async MongoDB.Driver.Core.Operations.CommandOperationBase`1.ExecuteProtocolAsync[](?)
   at async MongoDB.Driver.Core.Operations.ReadCommandOperation`1.ExecuteAsync[](?)
   at async MongoDB.Driver.OperationExecutor.ExecuteReadOperationAsync[](?)
   at async MongoDB.Driver.MongoDatabaseImpl.ExecuteReadOperationAsync[](?)
   at async Microsoft.Tri.Center.Database.MongoDatabaseExtension.RunAsync(?)
   at async Microsoft.Tri.Center.Database.CappedCollection`1.UpdateCurrentCollectionEntityCountAsync[](?)
   at async Microsoft.Tri.Infrastructure.Extensions.TaskExtension.<>c__DisplayClass33_0.<RunPeriodic>b__0(?)

Read other answers
RELEVANCY SCORE 48.4

Hiya,

I'm having problems with my computer. Inexplicably, my dad tried to log on earlier and upon logon he got BSOD, with the error being cited as IRQL_NOT_LESS_OR_EQUAL. I'm no expert, so I tried to do a system restore, which didn't help at all. Initially, I couldn't even load it up in safe mode without getting BSOD'd, but now it has for some reason begun to work in safe mode. I've been reading around this error on my laptop and it seems to happen when there's a driver inconsistency or you've plugged something in - neither of these have happened.

One time, I got it to work for a short while, but my inet browsers weren't working, and after putting on music for 20 secs or so, I got another BSOD, this time reading SYSTEM_SERVICE_EXCEPTION.

I ran sfc /scannow as admin in cmd but it found no errors, apparently.

I've attached a file that the error report contained information. I don't know if anyone can use it to help me - if there's something else you need I'll try and get it.

Thanks very much in advance for any help - I'd really prefer not to have to reformat so much appreciated!

Alex

A:Double BSOD Crash Error

  
Quote: Originally Posted by alx91


Hiya,

I'm having problems with my computer. Inexplicably, my dad tried to log on earlier and upon logon he got BSOD, with the error being cited as IRQL_NOT_LESS_OR_EQUAL. I'm no expert, so I tried to do a system restore, which didn't help at all. Initially, I couldn't even load it up in safe mode without getting BSOD'd, but now it has for some reason begun to work in safe mode. I've been reading around this error on my laptop and it seems to happen when there's a driver inconsistency or you've plugged something in - neither of these have happened.

One time, I got it to work for a short while, but my inet browsers weren't working, and after putting on music for 20 secs or so, I got another BSOD, this time reading SYSTEM_SERVICE_EXCEPTION.

I ran sfc /scannow as admin in cmd but it found no errors, apparently.

I've attached a file that the error report contained information. I don't know if anyone can use it to help me - if there's something else you need I'll try and get it.

Thanks very much in advance for any help - I'd really prefer not to have to reformat so much appreciated!

Alex


If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to... Read more

Read other 1 answers
RELEVANCY SCORE 48.4

Hi,

I am trying to find a permanent solution to this crash that happens always when I start up the Windows 7. The BSOD, when it happens, is all grainy and scratchy and impossible to read.

Following is error report I get when I startup in safe mode.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 6153

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88005DC8024
BCP3: FFFFF88002FBD998
BCP4: FFFFF88002FBD200
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

The BSOD has never recurred when I reboot in safe mode with networking. Could someone explain what the problem is and how this can be resolved?

A:BSOD Crash error 1000007e - HELP!

http://www.sevenforums.com/crashes-d...tructions.html





Quote:
The BSOD has never recurred when I reboot in safe mode with networking


This means a faulty/outdated driver is causing it





Quote:
is all grainy and scratchy and impossible to read


Usually caused by overheating or a bad GPU

Read other 6 answers
RELEVANCY SCORE 48.4

Hey Guys,
I'm fresh out of ideas with a system I am charged to maintain at work. It continually crashes without any form error message (as per the topic title). Are there any ways of identifying what is causing the crashes that I am unaware of?
I am currently doing some isolation tests because this leads me to believe it is a hardware issue, but would be grateful of any input.
Thanks
a3

A:Crash w/o BSOD or Error in Event Log?

Hello,

Such problems are usually caused by hardware. In particular, I'd investigate the PSU as a probable cause. Could we get some specs on that, such as the age and model?

Run Prime95 as well; specifically run the Large FFTs test, but the others would also be good when you have the time.

CPU - Stress Test with Prime95 - Windows 7 Forums

Read other 10 answers
RELEVANCY SCORE 48.4

Hiya,

Just been told to repost this with updated information: I'm having problems with my [COLOR=#0072BC ! important][COLOR=#0072BC ! important]computer[/COLOR][/COLOR]. Inexplicably, my dad tried to log on earlier and upon logon he got BSOD, with the error being cited as IRQL_NOT_LESS_OR_EQUAL. I'm no expert, so I tried to do a system restore, which didn't help at all. Initially, I couldn't even load it up in safe mode without getting BSOD'd, but now it has for some reason begun to work in safe mode. I've been reading around this error on my laptop and it seems to happen when there's a driver inconsistency or you've plugged something in - neither of these have happened.

One time, I got it to work for a short while, but my inet browsers weren't working, and after putting on music for 20 secs or so, I got another BSOD, this time reading SYSTEM_SERVICE_EXCEPTION.

I ran sfc /scannow as admin in cmd but it found no errors, apparently.

I've attached all the data from the minidump folder. I don't know if anyone can use it to help me - if there's something else you need I'll try and get it.



Thanks very much in advance for any help - I'd really prefer not to have to reformat so much appreciated!

Alex

A:Double BSOD Crash Error

Hi alx91,
Can you do chkdsk /f in command prompt?
Here's how you do it:

1. Go to Start Menu, type in cmd and hold CTRL+SHIFT+ENTER
2. Type in chkdsk /f and press enter
3. It'll ask you to restart your computer, let the computer restart.
4. When you see something like this:

Don't press any key and let it scan the system.
5. Hopefully, once it's done scanning. It will restart automatically.

Let me know the results.

Probably caused by: Ataport.sys

Read other 9 answers
RELEVANCY SCORE 48.4

Ran CPU, GPU, Memory test NO Errors. When in IDLE in Win no problems but when I start for example playing some game there is an random crash, just black screen and then restart. I have new CPU, GPU, Power Supply, Main Board.

- x86 (32-bit) or x64 ?
x64
- the original installed OS on the system?
Win7 x64
- an OEM or full retail version?
full retail version
- What is the age of system (hardware)?
except HDD all less then 2 weeks
HDD about 3 years but no prob appeared.
- What is the age of OS installation (have you re-installed the OS?)
about half a year.






Quote:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2011-04-20T08:34:16.636821100Z

EventRecordID 252276

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Slimak-PC

- Security

[ UserID] S-1-5-18


- EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0


Thx for help

A:error 0x8000000000000002 even no BSOD just crash

Have you checked the temperature of the video card?
Have you tried taking the card out and re-seating it in the motherboard?

Can you go to C:\Windows\LiveKernelReports\WATCHDOG and copy a couple of the files from there and upload them here?

Try running a video card stress test
Video Card - Stress Test with Furmark

Read other 2 answers
RELEVANCY SCORE 48.4

Hello,

My problem started a couple days ago while using my computer as normal. A blue error screen comes up at seemingly random times and my computer restarts. Ive updated my system drivers and taken advise from several forums but nothing seems to resolve the problem. The error message doesn't seem to occur while in Safe Mode.

I have an HP G60 Notebook PC and I'm running Windows 7 Ultimate x86, upgraded from Vista about 8 months ago.
CPU: AMD Athlon Dual-Core QL-64
VC: NVIDIA GeForce 8200M G

Some information from the error message,

DRIVER_IRQL_NOT_LESS_OR_EQUAL

STOP CODE: 0X000000D1 (0X00000030.00000002.00000000.0X906738A5)

***athr.sys***
 

A:Solved: BSOD Crash Error.

Read other 8 answers
RELEVANCY SCORE 48.4

HI,

I am getting frequent BSOD. I am attaching the zip file for your analysis.

A:BSOD crash with error 0000007f

Hello Sushant !

First of all, you update your network drivers, and update your indows. Most probably you dont have SP1 installed ?

Are you overclocking ? If so, get back from any overclocking.

Test your RAM . RAM - Test with Memtest86+

Upgrade your AMD graphics drivers, too !

Read other 1 answers
RELEVANCY SCORE 48.4

I know that this issue has been addressed many times on this site, but after some effort I haven't been able to find a fix that applies to my problem.

Symptoms:

- while shutting down manually (click 'shut down') system briefly says that it is "waiting for background programs to close" before shutting down (2-5 seconds). Even though there are no programs running.
- Then that message disappears, then appears and disappears again.
- All this without any user interaction
- On startup, all is well

BUT
- if left unattended, the system will put itself to sleep (despite the power settings) after a short time
-- or something resembling sleep; the power light remains on, but the system will not respond to input from the keyboard or mouse;
- after a hard shutdown and wakeup (hold power key for 5+ seconds) the BSOD appears

Message:
DRIVER_POWER_STATE_FAILURE
STOP: 0x9f
FIRST PARAMETER: 0x03

Your help would be greatly appreciated. I have attached the files generated by the debugger.

Read other answers
RELEVANCY SCORE 48.4

Hello, for the past couple of days, I have been getting random BSODs (usually while gaming). I have attached the log files.
I ran Windows Memory Diagnostic, and it told me that I had a hardware issue, however I ran HDI Memtest and Memtest86 for several hours without any issues, so I assume my RAM is fine.

Please note that there are only two dumps relevant to this issue (dated 7/5/2015 and 7/6/2015) because I did a system recovery rollback on 7/6 in order to see if it would help the problem, so all dumps before that have been erased.

Thank you so much for your help!

A:BSOD Crash Error 0x0000000a

Hi ken1988,

Welcome to the 8forums.
Although I'm pretty new to this, I'll try to help you out.

Because you already checked your RAM there is for now only 1 thing to do, updating drivers.
Please update following drivers:

Code:
Realtek HD Audio driver
MBfilt64.sys Fri Jul 31 05:40:32 2009 (4A7267B0)
Realtek

nVidia Streaming Kernel service
NvStreamKms.sys Mon Jan 12 18:56:42 2015 (54B40ADA)
Please check following link for a possible fix:
https://forums.geforce.com/default/t...ezing-your-pc/



The following is for information purposes only.

Code:
The following information contains the relevant information from the blue screen analysis:
**************************Mon Jul 6 18:09:26.849 2015 (UTC + 2:00)**************************
Windows 8 Kernel Version 9600 MP (8 procs) Free x64

System Uptime:0 days 0:13:57.647

Probably caused by :dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::CloseLocalAllocation+501 )

BugCheck 1A, {403, fffff680001de3e8, d6f00001a1af886f, fffffe80001de3e8}
BugCheck Info: MEMORY_MANAGEMENT (1a)

Arguments:
Arg1: 0000000000000403, The subtype of the bugcheck.
Arg2: fffff680001de3e8
Arg3: d6f00001a1af886f
Arg4: fffffe80001de3e8
BUGCHECK_STR: 0x1a_403

PROCESS_NAME: ffxiv_dx11.exe

FAILURE_BUCKET_ID: 0x1a_403_dxgmms1!VIDMM_GLOBAL::CloseLocalAllocation

CPUID: "Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz"

MaxSpeed: 2600

CurrentSpeed: 2594

BIOS Version 1.03.05aRLS1

BIOS Release Date 01/23/2015

????????????????????????????????... Read more

Read other 1 answers
RELEVANCY SCORE 48

I have a feeling I got a virus here.
This is a brand new computer with Kaspersky installed so I am very surprised.
 
I usually leave my computer on over night, it is only a few months old.  I started to read news on the web this morning and everything basically stopped responding.  The hard drive light was on and nothing was responding.  I couldnt even open the task manager.  So I tried control alt delete and nothing.  I was forced to hold the power button to restart the computer.  It restarted and loaded windows, but the same thing happened.  I restarted again, this time in safemode and it was loading ok.  I disabled a few things in the msconfig that i thought may have been causing the problem on startup, but to no avail.  I restarted again in safe mode and ran malware bytes and it found 2 trojans.  I went to get rid of them by clicking to restart and now windows will not load at all.  The windows screen shows up, but no graphic or anything just WINDOWS 7.  I was able to start it again and get to the repair section and received this error code:
 
error 0xc0000225 windows does not start
I restarted again in safe mode and it took forever to load.  It was going through all the drivers as it does and it took a good 10 mins when it normally takes less than 1.   Now the screen is black with just the mouse pointer and no windows safe mode.
 
Mind you, the whole time the hard drive light is con... Read more

A:Windows 7 will not start after crash

Update on this.  I  was able to get the startup fixed, and the computer loads windows.  However, it is still unbearably slow.  The HD is running rampant and i cant really do anything on the computer without waiting a very very very long time for it to respond.
Obviously I am infected with something.   So if anyone has any clues, I sure would appreciate your help (again).

Thanks a bunch.

Read other 29 answers
RELEVANCY SCORE 48

so this has been going on for a month now every few days my computer will freeze some time I'll get a BSOD some times I wont. then Windows will not start at ALL. First I'd get window can't be found then it would get stuck on the starting Windows page and BSOD, now it going right to my bios screen. each time I'll try to boot from a USB to "repair" half the time nothing works others I'll have it say Windows can not repair would you like to send this info. most the time when it dies that Windows magical starts up untill the next time and we start this all over and over.


and as of right know it doesn't boot up onto the BIOS but the windows repair from my USB. I'm sure if I take it out it will go back to the BIOS

Read other answers
RELEVANCY SCORE 48

I have a month old Dell XPS 8700 with Windows 8 (later updated to 8.1). The computer has been super. While running Acronis True Image, the computer crashed. Now, the screen shows only Dell logo. No Windows 8. Unlike Windows XP or 7, booting from CDROM is not possible unless wind0ows 8 is running. The computer came with "windows 8 Recovery Media" DVD disk. But it does not boot from DVD ROM. Shift +F8 does not respond. It seems that my computer is dead. I wonder how I can start Windows 8. Any suggestion would be appreciated.

A:How to start windows 8.1 after crash

Originally Posted by hummer7


I have a month old Dell XPS 8700 with Windows 8 (later updated to 8.1). The computer has been super. While running Acronis True Image, the computer crashed. Now, the screen shows only Dell logo. No Windows 8. Unlike Windows XP or 7, booting from CDROM is not possible unless wind0ows 8 is running. The computer came with "windows 8 Recovery Media" DVD disk. But it does not boot from DVD ROM. Shift +F8 does not respond. It seems that my computer is dead. I wonder how I can start Windows 8. Any suggestion would be appreciated.



Hello,

You should be able to edit the BIOS to make the CDROM drive boot piorty. You can do this by pressing the key that is shown below when the dell logo appears, normally this is the DEL or F2 key.

When you press that the bios should start, find BOOT and place the CDROM drive as first boot device, then HDD. Then try to boot from your CD. this should just work fine.

Read other 11 answers
RELEVANCY SCORE 48

I completed a fresh full install of Windows 7, updated all drivers and even flashed my bios to the latest release. Here are my system specs:

OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SUAREZ-PC
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type x64-based PC
Processor AMD Phenom(tm) 9500 Quad-Core Processor, 2526 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 080015, 5/30/2008
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name Suarez-PC\Ken
Time Zone Central Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 4.00 GB
Available Physical Memory 2.65 GB
Total Virtual Memory 8.00 GB
Available Virtual Memory 6.49 GB
Page File Space 4.00 GB
Page File C:\pagefile.sys

I keep getting random bsod error stop 0x00000101 and cant figure out why. Sometimes it runs well for the day and some times it crashes 4 times in less thatn 2 hours. I have attached the latest dump file, hope someone here can help, pulling my hair out on this.
thanks

A:BSOD crash error STOP 0x00000101

Everything I could find on your stop error points to a heating issue, specifically an overheating CPU... Is this a custom built rig?? I would carefully clean/reapply some Arctic Silver heatsink paste and see if this helps...

Read other 9 answers
RELEVANCY SCORE 48

I have been getting random crashes lately and wanted to know if you guys could help.

MEGAUPLOAD - The leading online storage and file delivery service

Uploaded a few dump files.

A:BSOD Random crash error 0x0000003b

  
Quote: Originally Posted by mcginnis


I have been getting random crashes lately and wanted to know if you guys could help.

MEGAUPLOAD - The leading online storage and file delivery service

Uploaded a few dump files.


Sorry tried Mega 3 different times and no joy.

Pleas upload it to us here.

Read other 9 answers
RELEVANCY SCORE 48

hello all. i just recently completed the build on a customer build. at random times i will get a bsod crash and restart. the error says system exception error at the top of the BSOD and computer goes memory dump and system restart. it is an intermittment issue and definitely a little computer savvy.

System specs

AMD Athlon II X4 635 Propus 2.9GHz Socket AM3 95W Quad-Core ASUS M4A79XTD EVO AM3 AMD 790X ATX Seagate Barracuda 7200.12 ST31000528AS 1TB 7200 RPM SATA 3.0Gb/s 3.5 G.SKIL 1 GB 240-Pin DDR3 SDRAM DDR3 1333 x 4 Rosewill BRONZE series RBR1000-M 1000W EVGA 01G-P3-1158-TR GeForce GTS 250 1GB 256-bit DDR3 PCI

Exp Much help appreciated
matt

A:BSOD crash System exception error

Hi,
Your dump have error code :
0x3b = indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
0x7E = usually cause by drivers.

Start with removing avast and replace it with MSE , because I see avast driver involved in the crash.

Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff88002abf2a3, fffff88006772a98, fffff88006772300}
Probably caused by : aswMonFlt.sys ( aswMonFlt+52a3 )
Perform system file checker because your windows services crashed or stopped in an unsupported way.
--> command prompt(as admin) -> sfc /scannow

Update these drivers :

Code:
AsIO.sys Mon Dec 17 01:11:49 2007 --> Asus PCProbe Utility
Rt64win7.sys Fri May 22 07:52:30 2009 --> realtek NIC
Log

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff80002ac56e0, fffff8800a3ecec0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )

Followup: MachineOwner
---------

1: kd> !analyze -v
***************... Read more

Read other 4 answers
RELEVANCY SCORE 48

Hi all. I have been having issues with a BSOD with this exact code for months now. I haven't been able to find any solution, and it's becoming quite an issue. Here is a picture of the blue screen: http://i.imgur.com/ueqbEwn.jpg

I've tried many things. I've ran memtest for the majority of a day, ran chkdsk, did a clean uninstall of my video drivers and reinstalled them with the latest version, all of this to no avail. My second issue is that no matter what I do, I cannot seem to produce a crash dump, which obviously makes pinpointing the issue very difficult. Here is a picture of my startup and recovery settings: http://i.imgur.com/LMbi1QZ.png

It happens generally when I open any game in fullscreen. I also noticed that it happens when I unplug the HDMI from my GPU and plug it back in. However, I don't believe the issue is related to my GPU hardware as this is a new GPU and I was having the same issue with my old GPU. But I am open to any possibility.

Any sort of help would be greatly appreciated, whether it be for getting my PC to produce crash dumps or narrowing down the cause of the BSOD. I will provide anymore information on my PC if requested. Thanks!

A:BSOD error 0x0000003B, no crash dump

Just got this new error code immediately after unplugging the HDMI cable from my GPU: http://i.imgur.com/nkq6fSS.jpg

Read other 19 answers
RELEVANCY SCORE 48

I haven't been able to catch the exact errors when it has happened but it has only started since I installed Windows 8. I assume it's some sort of driver issue but any help would be great.

Thanks in advance,

Brent

A:BSOD - memory dump error/crash

Bump

Read other 2 answers
RELEVANCY SCORE 48

My computer often crashed in BSOD during this two months,which even happen after i reinstalled the win7.Here is the bugcheck: 0x0000000a (0x000000000100002c, 0x0000000000000002, 0x0000000000000000, 0xfffff800050045d0)
Windows 7 x64 OEM version,re-installed but the BSOD still happen
Can anyone help me?

A:frequent BSOD crash,error 0x0000000a

Hi

Have a read of this thread and follow the instructions to upload dump files
http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 48

*** WARNING... LONG STORY! ***

I've been getting the BSOD error 0x0000001A after i recently reinstalled windows and installing a new graphics card. Originally I was having an issue with my computer when I was only playing the beta of Starcraft 2 where my computer would go into power save mode. I contacted Dell about 2 months ago and they instructed me that my graphics card was starting to die. I continued using it until about a week ago when on a scorching day my computer wouldn't get past the windows logo screen (my fault for trying to run my computer in my room with the room temp being over 100). I noticed my graphics card would get scorching hot within 5 mins of use. My computer would only start in safe mode. Retardedly, I thought that by downgrading my windows version from 64bit to 32bit I would be able to access my desktop in normal mode but I initiated the install through safe mode. I was unable to complete the re-install however because it was originally started in safe mode. I ended up getting a new graphic card but after instaling it and trying to start windows i was getting stuck in an install error loop. I was finally able to reinstall windows this past Friday but since then I have been getting the BSOD. I have spoken with window's tech numerous times and have reinstalled windows 2 additional times and the drivers for my new graphics card but still get the errors.
I have been looking through the forums and ran my own "perfmon /reports" and have attatche... Read more

A:Getting BSOD error after graphic card crash

  
Quote: Originally Posted by Isralios


*** WARNING... LONG STORY! ***

I've been getting the BSOD error 0x0000001A after i recently reinstalled windows and installing a new graphics card. Originally I was having an issue with my computer when I was only playing the beta of Starcraft 2 where my computer would go into power save mode. I contacted Dell about 2 months ago and they instructed me that my graphics card was starting to die. I continued using it until about a week ago when on a scorching day my computer wouldn't get past the windows logo screen (my fault for trying to run my computer in my room with the room temp being over 100). I noticed my graphics card would get scorching hot within 5 mins of use. My computer would only start in safe mode. Retardedly, I thought that by downgrading my windows version from 64bit to 32bit I would be able to access my desktop in normal mode but I initiated the install through safe mode. I was unable to complete the re-install however because it was originally started in safe mode. I ended up getting a new graphic card but after instaling it and trying to start windows i was getting stuck in an install error loop. I was finally able to reinstall windows this past Friday but since then I have been getting the BSOD. I have spoken with window's tech numerous times and have reinstalled windows 2 additional times and the drivers for my new graphics card but still get the errors.
I have been looking throug... Read more

Read other 7 answers
RELEVANCY SCORE 48

I came back to my computer this morning and saw that it had crashed with a BSOD sometime early this morning. This happened the other day, too. The computer is just idling and running a Minecraft server.

A:Random BSOD crash unknown error

Code:
127.0.0.1 activate.adobe.com
Have you purchased a license for all your Adobe products? 127.0.0.1 is used primarily to block activation for the Adobe products.

Read other 3 answers