Over 1 million tech questions and answers.

BSOD Driver Power State Failure

Q: BSOD Driver Power State Failure

I started getting a BSOD almost every night after installing a new video card. It's an AMD APU that I was running with on-board graphics, and I just put in a GeForce 8800GT. I can't figure out what driver is causing it, as far as I know I'm running the latest and most appropriate driver for the card. Attaching the minidump files.

Thanks

Attachment 247194

RELEVANCY SCORE 200
Preferred Solution: BSOD Driver Power State Failure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Driver Power State Failure

Hi shhaggy,

The mini-dump exhibits 'ntsokrnl.exe' error that may indicate software issues. As per my experience, a fresh 'Windows reinstall' has been most useful. However, you may also try the following steps:

1. Reinstall 'Video Card' drivers
Click 'Start' and type 'devmgmt.msc' (without quotations) in 'Search programs & files' > Tap 'Enter' > Expand 'Display Adapters > Right click & uninstall 'GeForce 8800GT' (Confirm software install if prompted) > Follow through with the uninstall and restart the system > Click Drivers | GeForce to run 'Auto-detect GPU Utility' > Download and install the suggested driver > Restart system and check results

2. If the issue persists, run 'System File Checker tool' to see if that works: Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

3. If you still experience issues, try 'Factory Reset' (If a healthy recovery image is available)
If a healthy 'Recovery Image' is available (on the hard drive or on an external media), you may restore the system back to known-good settings. This step may not always work; you may give it a shot before doing a 'fresh Windows Reinstall'.

Note: 'Factory Image Restore/Operating System Reinstall' will lead to data-loss; please backup the data on an external media before attempting the restore options.

Read other 1 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

While surfing the web, I suddenly got this BSOD that says something about a driver power state failure.  I don't know if this is the only incident, or if this is going to repeat in the future.  I am not that much of a computer wiz, so I would like to know what is causing this BSOD, and if this is an isolated incident or a recurring one?

A:BSOD driver power state failure

 Please post the exact message and error code.

Read other 22 answers
RELEVANCY SCORE 98

I am having this BSOD since 14 days , my laptop HP dv6 6165 tx is new and a month old and i play games on it for almost 2-3 hours daily it has OEM windows 7 64 bit installed on it. I have attched the mini dump report files and the perform/report files in the attched file zip folder ,please help me.

A:BSOD Driver power state failure

Problematic software:
Code:
tuneuputilitiesapp64.exe c:\program files (x86)\tuneup utilities 2012\tuneuputilitiesapp64.exe 3972 8 200 1380 12-04-2012 08:09 12.0.2012.117 1.28 MB (1,337,664 bytes) 12-10-2011 18:14
tuneuputilitiesservice64.exe c:\program files (x86)\tuneup utilities 2012\tuneuputilitiesservice64.exe 1184 8 200 1380 12-04-2012 08:08 12.0.2012.117 1.98 MB (2,072,896 bytes) 12-10-2011 18:14
Many of us on the forums actually do not recommend automated optimization tools for Windows 7. Windows 7 does a much better job of handling its own optimization than its predecessors did. We especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.

In the future, if you need help optimizing Windows 7, please post a thread in Performance & Maintenance - Windows 7 Forums or follow the tutorial enclosed in that forum to Optimize Windows 7.
Security Software (to check that it is installed and working properly; nothing needs to be done with this information at this time):
Code:
msmpeng.exe c:\program files\microsoft security client\msmpeng.exe 684 8 200 1380 12-04-2012 08:08 4.0.1512.0 12.50 KB (12,800 bytes) 28-02-2012 12:24
msseces.exe c:\program files\microsoft security client\msseces.exe 3140 8 200 1380 12-04-2012 08:09 4.0.1512.0 1.21 MB (1,270,656 bytes) 28-02-2012 12:28


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Co... Read more

Read other 9 answers
RELEVANCY SCORE 98

i get this at least once a day because i dont turn my computer off and it gets really frustrating sometimes.

attached is the minidump file.

please if somebody could help me out :)

A:BSOD power state driver failure

FYI - I have severe eye problems. If I don't respond to your postings, please PM another staff member for assistance.

Please provide this info for a more complete analysis: http://www.techsupportforum.com/foru...ta-452654.html

The memory dump points to your network drivers as the cause. In most cases updating these will fix the problem.

BUT, the antivirus/Internet Security application that you use can also cause this. Uninstalling it and installing a freshly downloaded copy can fix that.

Also, this may be caused by a hardware problem. But the diagnosis of that is done by trying the above things.

Another possibility is the Gigabyte EasyTune software - but I'm not 100% sure that that's involved in this situation. To test, uninstall it and see if it stops the BSOD's.

Finally, the memory dump (crash) seems to have occurred during the sleep/hibernate transition. As such you should also reinstall the chipset, storage, and video drivers for your system.

Good luck!

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\092611-22854-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Sep 26 11:52:36.081 2011 (UTC - 4:00)
System Uptime: 0 days 1:23:55.251
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_Rt64win7_IMAGE_pci.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`03ab1a10 fffff800`044... Read more

Read other 1 answers
RELEVANCY SCORE 98

Thanks for reading my post. I've been using my Gateway laptop for 3 years with relatively few problems. Since June or so, I've been seeing random blue screens, with no consistent series of events, or none that I can see. I'm attaching the sevensforum folder. Any help would be appreciated.

A:BSOD- driver power state failure

Welcome
You reports were consistent. The cause seems to be this driver
O2sdx64.sys file descriptionProductname: O2Micro SD Reader Driver Description: O2Micro SD Reader Driver (AMD64) O2Micro
Go to the company website and update the driver or replace the software

Read other 3 answers
RELEVANCY SCORE 98

? OS - Vista/ Windows 7 ? Windows 7 Home Premium
? x86 (32-bit) or x64 ? 32-bit
?What was original installed OS on system? Yes.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Factory installed.
? Age of system (hardware) 15 months.
? Age of OS installation - have you re-installed the OS? Haven't reinstalled.
? CPU Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (2 CPUs), ~2.0GHz
? Video Card NVIDIA GeForce GT 130M
? MotherBoard Mobile Intel(R) 4 Series? I'm unsure of how to find this information.
? Power Supply - brand & wattage Unsure about this as well.
? System Manufacturer MSI
? Exact model number (if laptop, check label on bottom) MS-1722

Hello, I've been having some problems with recent random BSODs. I had the same problem several months ago, but it went away on it's own. If you could give me any ideas on what's up and how we can fix it, I'd really appreciate it. Thank you!

A:BSOD: Driver Power State Failure?

Please uninstall Daemon Tools as it's sptd.sys driver is known to cause BSOD's on Win7 systems. Then use this free tool to ensure that the offending sptd.sys driver is removed from the system: DuplexSecure - FAQ

The BSOD's blame o2sd.sys - a component of your Memory Card Reader software by O2Micro. Please download and install this driver to see if that fixes the problem: MSI Global ? Download Center
Also, please take care of these:
OLDER DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please update these drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers:

Quote:





Code:

sptd.sys Sun Oct 11 16:54:02 2009 (4AD245EA)
iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
amdxata.sys Fri Mar 19 12:19:01 2010 (4BA3A3F5) - Windows Update will take care of this if it's available
speedfan.sys Sun Sep 24 09:28:47 2006 (4516880F)
giveio.sys Wed Apr 03 22:33:25 1996 (316334F5)
dump_iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
LMouFilt.Sys Tue Aug 24 1... Read more

Read other 3 answers
RELEVANCY SCORE 98

I just recently got a new laptop and have gotten BSOD twice now with DRIVER_POWER_STATE_FAILURE
I wasn't on the computer at the time of the errors, the first time it was on over night downloading, the second time i think it just had some folders open and google chrome.It is on Windows 7 Home Premium 64bit OEM, I've only had it for about 2 weeks.
HP Pavilion dv6-6b10tx Notebook (DV66B10TX(A3E16PA)) | Techbuy Australia
I couldn't run perfmon /report it said
An error occured while attempting to generate the report.

Access Denied.

Hope you can help!

A:BSOD Driver power state failure 9f

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [K:\BSODDmpFiles\787Bill\Windows_NT6_BSOD_jcgriff2\012712-21496-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`041733c0?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02c5c000 PsLoadedModuleList = 0xfffff800`02ea1670
Debug session time: Fri Jan 27 01:38:38.811 2012 (GMT-7)
System Uptime: 0 days 8:57:27.857
Loading Kernel Symbols
...............................................................
................................................................
.................................................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*************************************************... Read more

Read other 9 answers
RELEVANCY SCORE 98

Laptop works fine as long as monitor doesn't go to sleep or if computer is shutdown. After a certain period of time when monitor goes to sleep, BSOD appears and then computer restarts. If I try to shutdown the laptop, it hangs. Screen just says "Shutting Down" for approximately 10 minutes and then get BSOD. Works fine in Safe Mode. I have 2 additional files that I will have to post in the thread. Any help would be greatly appreciated.

OS - Win 7 (x64)
HP HDX Laptop purchased in November 2009 with Vista...upgraded to Win 7 in December
CPU - Intel Core 2 Duo - P7450 / 2.13 GHz
Video Card - NVIDIA GeForce 9600M GT
Not sure about motherboard and power supply data...let me know where to find it and I will post.

Thanks!

A:BSOD - Driver Power State Failure

Attached are 2 additional files.

Read other 1 answers
RELEVANCY SCORE 98

I got a bluescreen named "Driver Power State Failure" when trying to turn off my computer.

Two days ago, I got the first bluescreen on this computer with "Display Driver", I updated the driver on my graphics card (ATI Radeon HD 4850 Series) to see if it fixed the problem. After this first bluescreen it was also a problem turning on the computer: Windows doesn't automatically start, so I have had to go into the BIOS and (Ctr+Alt+Del) to restart for some reason, before I get into the boot menu. From there I have tried starting windows, failing every time, leading to Start Restore (or something, can't remember what it's called) starting, working for a good 10 minutes, restarting computer, and Windows starts loading. After about half an hour, or the time it takes before the screen goes black from inactivity, the login screen appears when I wake the computer. From this state it works normally. However, after waking it from Sleep Mode (keyboard/mouse click) I can't do anything, and after a while Windows shuts down and restarts the computer (to the screen with "Del: Enter Screen F12: Boot Menu")

It's from here the new BSoD came in: I used the power button to try and shut down Windows normally (after the inactivity problem after Sleep Mode), which took about 15-30 minutes with the "Shutting down... Please Wait"-screen, before I got this bluescreen (Driver Power State Failure).
I have now turned the computer off and restarted it. I... Read more

A:Driver Power State Failure BSoD

Let's start with updating/replacing your nvstor32.sys driver (it was blamed by the crash dump)
From this link: http://global-download.acer.com/Step...&SC=PA_7&LC=en
Download and install the Chipset and the SATA AHCI drivers

Also, please update these older drivers (especially the one's from 2001, 2004, 2005, and 2006):

Code:
zntport.sys Mon Jan 22 01:23:34 2001
NTIDrvr.sys Tue Dec 21 15:33:14 2004
tvicport.sys Wed Mar 30 05:12:36 2005
PxHelp20.sys Wed Oct 18 13:33:53 2006
nvraid.sys Wed Jun 06 16:34:41 2007
nvsmu.sys Sat Jul 07 18:13:09 2007
nvmfdx32.sys Mon Sep 10 22:10:00 2007
int15.sys Mon Jul 02 22:03:24 2007
int15.sys Mon Jul 02 22:03:24 2007
Here's the dump file analysis:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18082.x86fre.vistasp2_gdr.090803-2339
Machine Name:
Kernel base = 0x82050000 PsLoadedModuleList = 0x82167c70
Debug session time: Sun Dec 20 15:10:03.404 2009 (GMT-5)
System Uptime: 0 days 21:32:15.596
Loading Ker... Read more

Read other 19 answers
RELEVANCY SCORE 98

Hi my Dell Inspiron N5110 laptop has been having the BSOD issues, these days if I shut the lid down, the laptop does not hibernate, even though the power settings are such.

I have got the blue screen a number of times, I have also restored the laptop to an earlier restore point, but it has not helped solve the problem.

I'm attaching the dump files as instructed, plz help me resolve this issue......
Thanks

A:BSOD Driver power State Failure

Welcome to SevenForums.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

The BSOD seems to be cause by HotSpot shield driver and Symantec/Norton seems to be contributing to it. (FYI, Norton is a frequent cause of BSOD-s.) I would suggest you to uninstall Norton and see if the problem persists, replace with Microsoft Security Essentials at least to test.
Norton Removal Tool
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.


Code:
0: kd> !irp fffffa80092dad50
Irp is active with 3 stacks 2 is current (= 0xfffffa80092dae68)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8008782050 000000... Read more

Read other 9 answers
RELEVANCY SCORE 98

I can't seem to narrow down the culprit for this (beside me not knowing what I'm doing). Will someone please look at the dump files and provide a bit of advice.

I have gone through and confirmed all of the drivers are the latest version.

The error seems to occur when the machine has been left on - go to a meeting and come back to BSOD upon power up. I cannot duplicate the failure.

Appreciate the help.

A:BSOD Driver Power State Failure

Hi bsodvictim.

Download and install Intel? PROSet/Wireless Software and Drivers for Windows 7 which works for your Intel? Centrino? Advanced-N 6230. It is too old and failing.

Let us know the results.
___________________________________________________________________________________________

Code:
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8006e77050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\NETwNs64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
\Driver\NETwNs64
Args: 00014400 00000000 00000004 00000002
[ 16, 2] 0 e1 fffffa800741b040 00000000 fffff8000351c200-fffffa800c835370 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800c835370

Args: 00000000 00000000 00000000 00000000

Code:
fffff880`0543e000 fffff880`05cc4000 NETwNs64 T (no symbols)
Loaded symbol image file: NETwNs64.sys
Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
Image name: NETwNs64.sys
Timestamp: Sun Sep 18 14:5... Read more

Read other 8 answers
RELEVANCY SCORE 98

A couple days ago I did a force shutdown while my computer was mid shutdown, corrupting some windows files (I thought I smelt my computer burning so did a panic shutdown, but it was something else burning)

initially windows would not boot from my ssd, it would go all black with green artifacts on the screen just before the welcome screen, but I still had another windows install on my old HDD so I just booted from that without issue. I then ran the windows repair from install disc and it fixed the windows install on my SSD.

Since then, however; when I leave my computer unattended for a while I get a BSOD on returning with the driver state failure message. I'm not sure if this is occurring on sleep/hibernation or on reboot from the windows update I was trying to do.

Your guys' help is much appreciated, thanks!

update: did a reboot, no issue. Tried to put the computer to sleep, another BSOD.
uploaded a new SF rar file, as well as the debug tool zip file

A:BSOD driver power state failure

Hi Strini.

First of all, make it sure that the SSD is running with the latest firmware.
How to Upgrade Samsung SSD Firmware | StorageReview.com - Storage Reviews

Also update the BIOS to version F10b dated 2012/08/31 (not to the latest one) if possible. The newer BIOS and SSD firmware is most needed to run a SSD properly.

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) in... Read more

Read other 5 answers
RELEVANCY SCORE 98

Hi folks. I'm getting the Driver Power State Failure blue screen in Windows 7 x64. Here are my vitals:

It's an HP dv6-3052nr laptop with a fingerprint scanner.

? Windows 7 x64 Home Premium OEM - I have not reinstalled the OS since I got it from HP, and I am ok with doing that if need be.
? This is a brand new laptop, it's only like 2 months old at most
? Intel Core i7 720QM, 6GB ram
? ATI Mobility Radeon HD 5650
? No idea what the motherboard or power supply is

This is your run of the mill new laptop. I use it for web browsing and communication, but I use it as a music recording computer, so I have some music programs installed. Also, I have a USB audio interface for music recording as well.

The blue screen has happened twice in the last two days, and once a few days ago. I have been getting a popup dialog that says "Windows has recovered from an unexpected shutdown" on startup as well too; it happens after the blue screen error but it has also happened after I have closed the lid on the laptop. I think the cause is actually my fingerprint reader, because it has its own sleep/wake cycle and it doesn't always wake when I open my laptop up.

I have attached all requested files as per the BSOD posting instructions. I hope you guys can help me out! Thanks for everything.

Read other answers
RELEVANCY SCORE 98

Hi There,

Need some help, I am getting a driver power failure followed by a blue screen of death a reboot. Not sure what the problem is, can anyone provide some advice. I have tried to attached the minidump files but have not been able to.

Thanks in advance

A:Driver power state failure BSOD

Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

Read other 10 answers
RELEVANCY SCORE 98

I got a BSOD earlier and the error was "DRIVER_STATE_POWER FAILURE. Requested files attached and I also found this info in my system logs:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8007694060, 0xfffff800045e7748, 0xfffffa8008f9c680).

My system specs are available in my profile.

I hope I did everything correctly, and thanks in advance for the help!

A:Help With Driver State Power Failure BSOD

Hi GirlFriday and welcome to the forum.

Security App

Code:
avgrkx64.sys Fri Feb 8 09:14:05 2013 (51146D7D)
avgldx64.sys Fri Feb 8 09:14:24 2013 (51146D90)
avgloga.sys Fri Feb 8 09:14:29 2013 (51146D95)
avgidsha.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgmfx64.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgtdia.sys Thu Mar 21 07:50:47 2013 (514A6777)
avgidsdrivera.sys Fri Mar 29 07:40:56 2013 (5154F128)
avgtpx64.sys Tue May 7 18:38:19 2013 (5188F5BB)
Crashes indicate AVG being a possible cause. Remove AVG and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.


Update and make full scans with both separately.


Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.
Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Wind... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hey Everyone,

If anyone could take a look at this and see why I got the BSOD for Driver Power State Failure, I would greatly appreciate it.

There are a few .dmp files in the attachment, but the only one I am concerned about would be the most recent one and may be the one before, since they are both related to Driver Power State Failure.

Thanks in advance.

A:BSOD - Driver Power State Failure

Welcome to the forum.


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\schniederzero\SF_13-01-2014\011314-25708-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c0b000 PsLoadedModuleList = 0xfffff800`02e48e50
Debug session time: Mon Jan 13 07:54:00.000 2014 (UTC + 6:00)
System Uptime: 0 days 6:48:39.771
Loading Kernel Symbols
...............................................................
................................................................
................................................................
.
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hey!

I got a Driver State Power Failure yesterday after Windows 7 took ages to shut down. I have also noticed that of late my monitor wouldn't come out of standby mode when i switch on my PC no error beeps or anything just wouldn't come out of standby mode when i start it, not sure if the issues are related.

I am attaching the minidump file as well the error message I got when i rebooted into Windows 7. Would appreciate any help. Thanks so much!

A:Driver State Power Failure BSOD

Anyone?

Read other 2 answers
RELEVANCY SCORE 98

BSOD frequent error, it happens a least 3 time a day! Can someone help me please? It drives me crazy, Thank you

OS:Windows 7 Ultimate x86 Full retail
Age: year 2008? I don't know but there is a sticker on the bottom that says that.
OS install: less then 5 months old

A:BSOD Driver Power State Failure

I note you have Avast...
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

Read other 4 answers
RELEVANCY SCORE 98

Hello,

About 50% of the time that I shut down my PC, it freezes on the message "Shutting down" and after a while gives me a BSOD. I also get a BSOD every now and then when I'm browsing the web. I've ran the SF diagnostic tool and will post the results here.

I also came across the following similar looking article:

Driver power State Failure

I would be extremely grateful if somebody could shed some light on the situation, I strongly believe that this is one of the main causes of my insomnia, after bankruptcy and alcoholism of course.

A:BSOD: Driver power State Failure

All of your BSODs are being caused by your graphics driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007957a10, fffff80000b9c3d8, fffffa800717ae10}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------
Driver Reference Table - nvlddmkm.sys

Looking at the driver we can see it is very very old:


Code:
kd> lmvm nvlddmkm
start end module name
fffff880`0f000000 fffff880`0fc75d80 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sun Jul 10 18:12:46 2011 (4E1A23DE)
CheckSum: 00C7AFE4
ImageSize: 00C75D80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update the driver from here: Drivers - Download... Read more

Read other 9 answers
RELEVANCY SCORE 98

Attachment 215373

Attachment 215374

Attachment 215382
Hey!
I often get a BSOD: Driver Power State Failure. I attached my .dmp file. BlueScreenView says it's related to halmacpi.dll and ntoskrnl.exe. I hope someone knows a solution.

System:
32-bit Windows 7 Professional
Acer 5741 notebook
2-3 years old
OS has been re?nstalled 1,5 year ago
Ridder

A:BSOD: Driver Power State Failure

Problem Devices:
Code:
Ethernet Controller PCI \ VEN_14E4 & SUBSYS_036D1025 & DEV_1692 & REV_01 \ 4 & 12119FE & 0 & 00E0 The drivers for this device are not installed.
Photosmart Premium C309g-m ROOT \ MULTIFUNCTION \ 0000 This device is disabled.
Officejet Pro 8500 A910 ROOT \ MULTIFUNCTION \ 0002 The drivers for this device are not installed.
Officejet Pro 8500 A910 ROOT \ MULTIFUNCTION \ 0003 The drivers for this device are not installed.
Virtual Serial Bus Enumerator ROOT \ SYSTEM \ 0002 39
Photosmart Premium C309g-m ROOT \ IMAGE \ 0000 This device is disabled.
The Ethernet driver and Virtual Serial Bus Enumerator drivers should be taken care of. Please make sure all drivers are installed from Acer support. If you need help determining drivers, let us know.


Security Software: ??? Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Problematic Software:
Code:
Start Menu\Programs\TuneUp Utilities 2011 Public:Start Menu\Programs\TuneUp Utilities 2011 Public
... Read more

Read other 5 answers
RELEVANCY SCORE 98

? Windows 7
? x64
? 1month
? i7 930
? gtx 580
? asus rampage III gene x58
? enermax galaxy 850w DXX

when i shut down my pc takes 80% of shutdowns 14+ min to close down after showing a driver power state failure bsod, please help me find a solution,

thank you
damien short

A:driver power state failure bsod

Hello,

It appears your Creative Audio drivers are the cause, from the looks of the dump. I see they are rather old:
Code:
CT20XUT.DLL Thu Aug 21 12:40:17 2008 (48AD9A71)
ctaud2k.sys Thu Aug 21 12:38:56 2008 (48AD9A20)
CTEXFIFX.DLL Thu Aug 21 12:40:11 2008 (48AD9A6B)
CTHWIUT.DLL Thu Aug 21 12:40:21 2008 (48AD9A75)
ctoss2k.sys Thu Aug 21 12:36:31 2008 (48AD998F)
ctprxy2k.sys Thu Aug 21 12:38:58 2008 (48AD9A22)
ctsfm2k.sys Thu Aug 21 12:36:16 2008 (48AD9980)
Install updated drivers from here: Auzentech, Inc. Sound Cards. Audio You Can Believe In. World First soundcards for Music, HTPC, and Gaming.

If that doesn't work, upload a new report, and we'll go from there.

...Summary of the dumps:

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Jan 5 19:17:22.447 2011 (UTC - 5:00)
System Uptime: 0 days 6:05:05.649
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_ctaud2k_IMAGE_pci.sys
??????????????????????????????????????????????????????????????????????????????????????``

Read other 2 answers
RELEVANCY SCORE 98

My New Years Resolution is to get my laptop back to normal.

I've been having this issue for awhile where if I leave it sitting idle for a couple of minutes and come back, it may or may not cooperate. It frequently gets 'stuck' and becomes unresponsive. Every so often the BSoD pops up and gives the Driver Power State Failure.

I've zipped the documents as per the instructions in jcgriff2's signature.

Any help would be greatly appreciated, Thanks!

A:BSoD - Driver Power State Failure

Sorry, Left out step 5...

-Windows 7 Pro
-32 bit
-Original OS Vista Home Premium 32
-Current OS upgrade via educational system
-Age of hardware 3 1/2 years
-Installed 7 maybe 9-12 months ago... hoping to get rid of this same problem
-CPU: AMD Turion 64x2 TL-64 2.2GHz
-Nvidia GeForce Go7200
-MoBo: ?
-PS: ? (Laptop HP AC adaptor 90W)

Read other 6 answers
RELEVANCY SCORE 98

I'm getting this error when the system goes to a power down state I think. If I leave it on over night next morning I have the BSOD with this error. Not sure what to do about it. I uploaded the info files.

A:BSOD Driver power state failure

Your crashes are being caused by McAfee. It has a 2008 driver attached to it. You should update to a newer version of McAfee, and if you already have, the old version may not have been completely removed. Uninstall, download a fresh copy of the most up to date installer for McAfee, and re-install McAfee to see if that resolves the crashes.

How to uninstall or reinstall supported McAfee products using the McAfee Consumer Products Removal tool (MCPR.exe)


If the above does not work, remove McAfee completely using MCPR and replace it with either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Also, update the following driver:
Code:
fffff880`04784000 fffff880`047b6000 Rt64win7 Rt64win7.sys Thu Feb 26 02:04:13 2009 (49A65B0D)
It is your LAN driver, and you can find the update through HP Support for your model:
HP Support & Drivers | United States

You can also find it here:
Rt64win7.sys
->
Realtek

Read other 1 answers
RELEVANCY SCORE 98

hi i have hp laptop
i get always crash driver power state failure

Read other answers
RELEVANCY SCORE 98

Hi there, begging someone to help me.
Today when I using my laptop it stucked ,and I reboot it by press the power button,and when it rebooted it stucked at Welcome,and then the blue screen then driver power state failure I tried to reinstalled my os but problem was still here. I found when I uninstalled the Nvidia driver the os can work normally. Really really want someone to help. Thx a lot.

A:BSOD driver power state failure

  
Quote: Originally Posted by Mucbox


......... driver power state failure ..................
I found when I uninstalled the Nvidia driver the os can work normally.


Good info. It occurs.

We need to see the data as per the Blue Screen of Death (BSOD) Posting Instructions.Attach it in your next post in this thread.

Read other 8 answers
RELEVANCY SCORE 98

I've been experiencing issues with my computer. It tends to blue screen and reads "Driver_POWER_STATE_FAILURE". I've tried to run some scans and diagnostics and even backed up my PC and then rebooted it with factory new settings, but it is still BSOD. I have a dump file, but I cannot post it because it says I do not have permission to open or attach it. Any help would be greatly appreciated!


Thanks!

A:Driver Power State Failure - BSOD

You need to follow these directions
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 3 answers
RELEVANCY SCORE 98

I'm running Windows 7 Home Premium on an HP Pavilion Elite e9180f machine. I have an Intel core i7 processor (2.66 GHz), 9GB RAM.

I received a BSOD when Windows was shutting down. The message said "DRIVER_POWER_STATE_FAILURE".

I've attached the results of running the BSOD_Vista_v2-2_jcgriff2_.bat file and perfmon.

Thank you in advance.


Brad

A:Bsod driver power state failure

Please start by going to Device Manager and right clicking on the Microsoft Teredo Tunneling Adapter(s). Select Uninstall and let it uninstall the adapter. Don't be surprised if the adapter doesn't come back when rebooting - the only problem would be if it still shows an error condition after rebooting.

I suspect that this will fix the BSOD's, but we'll have to look at the dump files and (at a minimum) replace the networking drivers just to be sure.

....Running the dump file now.....

The dump file blames e1y62x64.sys - a component of your Intel(R) PRO/1000 Gigabit Networking Adapter

Please download a copy of the latest Windows 7 64 bit driver for this device from the Intel Download Center ( http://downloadcenter.intel.com/Default.aspx )
Then uninstall the current Intel networking driver from your system
Then install the freshly downloaded driver and monitor for further BSOD's.

Please also update this driver: 000.fcl Fri Sep 26 09:11:22 2008
It is a component of the Cyberlink program installed on your system.

Summary of the BSOD:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Jan 28 19:05:24.908 2010 (GMT-5)
System Uptime: 0 days 10:14:11.188
BugCheck 9F, {3, fffffa80083a6060, fffff800044e8518, fffffa800b85a790}
*** WARNING: Unable to verify timestamp for e1y62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1y62x64.sys
Probably caused by : e1y62x64.sys
DEFAULT_BUCKET_ID: ... Read more

Read other 1 answers
RELEVANCY SCORE 98

I really have no idea what is causing this BSOD. It seems to happen randomly and it has happened 3 times within the last week.

OS - Windows 7
x64
Originally installed Windows XP
full retail version
Age of system - about 3 years
Age of OS - 4 months
CPU - Intel Core 2 Duo E7200 2.53GHz
GPU - Nvidia GeForce 9600GT
Motherboard - ASUS Striker II Formula
Power Supply - 500W came with case (Raidmax Smilodon)

A:Driver Power State Failure BSOD

And the necessary files

Read other 7 answers
RELEVANCY SCORE 98

My very recently purchased laptop was showing some problems from last 2 days. It would get stuck at the shutdown screen and then after extended span of time I had to press and hold power key to turn it off. It happened only twice. (And if this may help I tell you I had updated atleast one or the other thing before shutting it down...either through HP Support Assistant or Windows update.

Last night i ran Windows Update and tried to turn off my pc but since updates were being installed it said Windows will shut down once the updates are installed automatically...so i went to sleep only to find in the morning a BSOD. It was stuck on it again i had to turn off my pc by holding power button and then windows refused to boot beyond the Windows 7 logo black screen. But after a couple of retries it started.

I am attaching the files.
Please help.

Windows 7 Home Premium x64
OEM
Age of the System- 6 days

A:BSOD Driver Power State Failure

The crash indicates possible Windows corruption or memory problems. The crash bugcheck itself indicates a driver issue.If you are overclocking any hardware, please stop.
Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug ... Read more

Read other 1 answers
RELEVANCY SCORE 98

I recently got a BSOD before this BSOD
the BSOD happened yesterday was kernel_data_input_error and I think I have fixed it? but the computer is still a little slow, and I noticed my Disk usage is most of the time at 100% then the apps(Browsers,task managers etc2) doesn't respond and now This BSOD Driver Power State Failure happened. I read that it's about an incompatible driver, but I don't know how to detect an incompatible driver because I refreshed windows 8.

A:BSOD Driver Power State Failure

Now I got the Driver_IRQL_NOT_LESS__OR_EQUAL
Edit: Got a BSOD again it's Driver_irql_not_less_or_equal again and it said tcpip.sys

I think this is about uTorrent.. Whene I open uTorrent and a few minutes later im getting a BSOD
I already fixed the 100% Disk usage on uTorrent but I ddnt know why I got the driver irql not less or equal tcpip.sys
Im using uTorrent to download PSO2(Phantasy Star Online 2) so it's legal the torrent came from their website

Read other 24 answers
RELEVANCY SCORE 98

First let me give a huge "THANKS" for this extremely helpful forum and service. I would not have any hope of correcting this issue on my own or without giving up my machine for a few days to an IT pro to fix it, which I do not have the luxury of time to do.

Here are my details:

? Windows 7 Professional (6.1.7601 Service Pack 1 Build 7601)
? x64
? Vista Premium (2009)
? Original Vista was installed already, Windows 7 upgrade came from a retailer and I installed it.
? Age of system (hardware) - 3 years
? Age of OS installation - have you re-installed the OS? I have not re-installed, but there are multiple copies of it because I added a new HDD and cloned the original before making the new one the primary HDD.

? CPU - Intel Core2 Duo T9550 @ 2.66GHz
? Video Card - NVidia GeForce GT 130M (1GM VRAM)
? MotherBoard - Don't know
? Power Supply - 90W, brand unknown

? ASUSTek Laptop
? N90SV


Thank you again for this service. I look forward to your diagnosis.

A:BSOD: Driver Power State Failure

From the last 9, 3 are corrupt, 3 are inconclusive, and 3 name the USB hub driver.
Do you have anything plugged into a usb port?
Is there any memory card in the card reader?(it runs off the USB hub)

athrx.sys Mon Oct 5 12:33:57 2009
Atheros AR928X Wireless Network Adapter Driver, if there is nothing from 2012 on the Asus page for your model this is the best place I know of to get it >
ATHEROS drivers for Microsoft Windows (Atheros?????)

There appears to be a USB web cam set as disabled in device manager, was this done manually by you, or did Windows do it(because of a problem)?
USB 2.0 UVC 1.3M WebCam USB\VID_064E&PID_A116\CN1316-S30B-MI03-VS-R03.01.03 This device is disabled.

I'm also seeing older AVG drivers
avgldx64.sys Thu Jun 3 1748 2010 (4C081968)
avgmfx64.sys Wed Aug 17 07:31:52 2011 (4E4BA6A8)
avgrkx64.sys Wed Feb 10 22:52:44 2010 (4B737F0C)
And
a2ddax64.sys Thu May 19 08:09:43 2011 (4DD50887)
a2dix64.sys Wed Nov 2 05:10:36 2011 (4EB1090C)
a2util64.sys Fri Oct 16 06:26:21 2009 (4AD84A4D)
EMSISOFT/A-SQUARED MALWARE-IDS UTILITY DRIVER

Are you using both programs? Is either one up to date?

ghaio.sys Mon May 30 05:34:05 2005 Way too old for a Win7 driver> ASUS NB Probe program> Check the Asus site for an update.

These are Vista era Suyin USB 2.0 Webcam drivers
sncduvc.SYS Mon Jul 7 06:30:20 2008
snp2u... Read more

Read other 11 answers
RELEVANCY SCORE 98

Hello,

I have a BSOD problem that states Driver Power State Failure. I read it is caused by a problem with a change in the alimentation mode or something, but this BSOD really happens randomly (last time occurred while I was reading a web page... I didn't even touch a key or the mouse).

I'm running Windows 7 32bits, my laptop is 3 or 4 months old (windows 7 was already installed).

I tried to run the batch from the "Blue Screen of Death (BSOD) Posting Instructions", but no folder is created when it's done... I followed every step (also ran the batch as an admin) so I don't know where the problem is coming from. The batch runs smoothly until the end, but there is just no folder created in my Documents folder. (I don't know if this is normal, but on the line right after "We will begin in 5 seconds..." there is a message saying that "the path hasn't been found" (my os is in french, so I don't know exactly what is the original line in english) but the batch still runs to the end).

I attached my last 3 minidumps, the perfmon file and a msinfo32.nfo file.

Thanks in advance for your help!

A:BSOD Driver Power State Failure

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Read other 9 answers
RELEVANCY SCORE 98

I've searched the forums and this seems to be a common bsod but varying in drivers that need to be updated.

? OS - Windows 7 ?
? x64
hp dm1z laptop


Originally, my problem was that I would put my computer into sleep or hibernate and I would be unable to recover back into windows. HP helped me turn the power settings off and on thus resetting it and it fixed it.

But now my computer hits BSOD once it's been asleep for about 10-15 mins, extended periods. It'd show BSOD out of no where!

A:BSOD - Driver Power State Failure

Hi,

The single BSOD blames your wireless networking driver.

Code:
athrx.sys Tue Sep 22 14:47:11 2009 (4AB83AAF)
See if an update fixes it - http://welcome.hp.com/country/us/en/support.html

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Dec 17 18:21:38.883 2010 (GMT+13)
System Uptime: 0 days 0:55:21.662
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
Probably caused by : athrx.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0316aa20 fffff800`00b9c518 fffffa80`02f7c7d0
??????????????????????????????????????????????????????????????????????????????????????``

Read other 1 answers
RELEVANCY SCORE 98

I know little about computers but I can follow directions well.

This is my computer

OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4089 Mb
Graphics Card: NVIDIA GeForce 9800M GTS , 1024 Mb
Hard Drives: C: Total - 295242 MB, Free - 181383 MB;
Motherboard: Gateway , IMV , Not Applicable , INVALID
Antivirus: avast! Antivirus, Updated and Enabled

It has been giving me the blue screen of death at least daily for over a week usually around 8 pm but it does like to mix things up and do it at other times. It was doing this same kind of thing this past march and I reformated which fixed the problem. However I would rather not do that again. I did a system restore back to the begining of the month but that didn't help.

Based on Blue screen viewer most of my prolems have been caused by ntoskrnl.exe. I have attached JPEGs of what it shows
 

Read other answers
RELEVANCY SCORE 98

Hi,

My laptop goes to BSOD what seems like several times a week and drives drives me nuts. We've had the laptop exactly two years now and it seems to be getting worse and more frequent. I've tried a completely fresh/clean install of Windows 7 64-bit, but no luck.

The problem happens about 70-80% of the time when the computer has gone to sleep and we're trying to wake it up using any button on the keyboard or the power button (doesn't matter which one). Less often, it will completely freeze up while we're browsing the internet (Chrome...we can switch between windows/desktop and scroll the cursor for a minute or so before the BSOD comes up).

The BSOD error comes up as: "Driver Power State Failure". Attached is the ZIP file as instructed.

Any help would be greatly appreciated.

Thanks,
Jeremy

A:Driver Power State Failure BSOD

Hi Neons97.

You need to update Fresco Logic xHCI (USB3) Controller FL1000 Series driver. No feasible update is available in ASUSTeK Computer Inc. -Support- Drivers and Download N53SV. So try the
Fresco Logic FL-1000/1009 USB 3.0 Controllers from Station-Drivers - Fresco Logic (drivers).

Also turn off USB selective suspend.
USB Selective Suspend - Turn On or Off

BTW, your RAM seems to be of odd volume.

Code:
Installed Physical Memory (RAM) 14.0 GB
Publish a Speccy snapshot : Speccy - Publish Snapshot of your System Specs .

Let us know the results.
__________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800fced060, fffff80000b9c3d8, fffffa80153e7010}

Probably caused by : usbhub.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hello,
I have been experiencing BSODs since I bought this cpu almost a year ago. The time between blue screens can range from a couple of hours to over a month. I use my computer mostly as a gaming laptop and most of the blue screens occur while I game. However, they have occasionally occured while I was just surfing the internet. It is always a driver power state failure blue screen. On to the cpu specs:

Alienware M17x R3
? OS - Windows 7
? 64 bit
? The OS came pre-installed
? The system is almost 1 year old, bought in august of 2011
? Dual graphics card: Intel(R) HD Graphics 3000/NVIDIA GeForce GTX 460M
? Processor: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz, 2201 Mhz, 4 Core(s), 8 Logical Processor(s)

I heard Mcafee could cause blue screens and so I recently deleted it, however I just got a BSOD earlier today with it deleted.

A:Driver power state failure BSOD

48 hour bump

Read other 14 answers
RELEVANCY SCORE 98

I've been getting a driver state power failure BSOD, I have no idea where the problem is coming from. minidump is attached. It's started recently, and I've been having problems now with the game Skyrim now too.

A:Driver Power State Failure BSOD

Update: Just encountered another BSOD, this time while browsing youtube. Both minidump files attached.

Read other 1 answers
RELEVANCY SCORE 98

I just got my ASUS G750 from Bestbuy a few weeks ago. I've been encountering this same BSOD since I got it (after installing programs). Lately it seems to be happening when I close a game from the battle.net app and attempt to open another. Other than that it almost seems to happen completely at random.

Thanks for the help!

A:BSOD Power State Driver Failure

Hi SnakeDoc919 & welcome to the forums ^_^,

I have analyzed your dump files and they all are of bugcheck code Driver_Power_State_Failure with the first parameter as 3. Below is analysis for informative purposes :-

Code:
**************************Thu Jun 26 03:19:19.764 2014 (UTC + 5:30)**************************Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001e4732880, ffffd001624aa930, ffffe001e4759670}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

??????????????????????????????????????????????????????????????????????????????????????``


On further analysis, the driver blamed is the "acpi.sys" which is a Windows component, and chance of it being at fault is extremely unlikely. Below is a list of the 3rd party drivers installed on your PC and I think that the ASUS Bloatware is causing all this. I have highlighted those Asus Bloatware drivers as well.

Code:
**************************Thu Jun 26 03:19:19.764 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
AiCharger.sys Fri Sep 23 07:34:40 2011 (4E7BE938)
btwl2cap... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hi,

I an getting BSOD randomly and it is driving me a little loopy.

I was getting a Internal power failure on the machine sleeping but preventing hibernation solved that. I create a task to set the power plan to my preferred plan (never sleeps) and that has solved that issue.

Now I am getting this Driver Power State Failure about 30 minutes after I turn the machine on. Full details in attached Zip File. I tried to uninstall SP1 at one point, but it said it could not uninstall everything.

Windows Debuggers says this:

Loading Dump File [C:\Windows\Minidump\041211-70512-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?00000000`00000000?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: srv*n:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`03204000 PsLoadedModuleList = 0xfffff800`03449e90
Debug session time: Tue Apr 12 09:41:28.605 2011 (UTC - 4:00)
System Uptime: 0 days 0:21:38.620
Loading Kernel Symbols
...............................................................
................................................................
................................................................
... Read more

A:BSOD Driver Power State Failure

I have re-attached all the details, I realise the last one was incomplete.

Read other 5 answers
RELEVANCY SCORE 98

ah.....when i try to shut down my laptop....it just shows shutting down for 5-10 minutes and then.....bang!!!
this BSOD occurs..
and i'm not able to run perfmon /report
it says an error occurred
"can't find path specified"
Help please!!

Also,I can't connect to Internet and control panel doesn't respond on starting..

A:BSOD:Driver power state failure

Skip the perfmon /report and upload the zip file

Read other 4 answers
RELEVANCY SCORE 98

Hi all, I've been receiving a Driver Power State Failure BSOD after shutting down/restarting my machine since yesterday. I just installed the Windows 7 RC1 but noticed people have helped out with this BSOD error on these forums before. My shutdown is taking around 20 minutes before crashing with the BSOD. How do I find out what is causing the error and fix it? Should I post my minidump? Thanks.

A:Driver Power State Failure BSOD

Post the dump, it may point to a cause however the symbols for Seven aren't available yet, so it may also be inconclusive.

Read other 3 answers
RELEVANCY SCORE 98

Hi,

My laptop has been having the following issue:

Sometimes when I put my laptop into hibernate it experiences a blue screen of death and states that the problem is due to a driver power failure.

I have a:

Dell 1745
500GB HDD
4GB RAM
Intel Core2 Duo CPU P7450 @ 2.13GHz

Windows gives me the following information on the error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8003C9D060
BCP3: FFFFF80004BA84D8
BCP4: FFFFFA80049AFB80
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Also find the attached dump file.

Thank you for any assistance.

A:BSOD Driver power state failure

Welcome Jack, please follow the Blue Screen of Death (BSOD) Posting Instructions .
The dump file uploaded is a 0x9F which is DRIVER POWER STATE FAILURE that happens in
transitions between power states most commonly S0 (ON state) > S3 (Sleep state)
or vice-verse. You can read more HERE.

The most common cause is a device driver but sometimes it's the hardware itself
that is at fault.


Code:
BugCheck 9F, {3, fffffa8003c9d060, fffff80004ba84d8, fffffa80049afb80}

Probably caused by : pci.sys ◄//Being falsely accused.

Code:
!irp fffffa80049afb80
Irp is active with 4 stacks 3 is current (= 0xfffffa80049afce0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800766d050 00000000 fffff80002ecb200-fffffa80092ac010 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\netw5v64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netw5v64.sys ◄//The actual culprit.
*** ERROR: Module load completed but symbols could not be loaded for netw5v64.sys
\Driver\netw5v64 nt!PopSystemIrpCompletion
Not surprisingly the driver is very very old!

Code:
lmvm netw5v64
start end module name
fffff880`0604a000 fffff880`06585000 netw5v64 T (no symbols)
Loaded symbol image ... Read more

Read other 8 answers
RELEVANCY SCORE 98

Hello
I recently have some BSOD's wich lead in reinstalling windows completly,

They when i shutdown my computer, shutting down the computer takes ages, wich lead in BSOD with i think this mssg, the computer didn't make a minidump but did create the folder.

When the computer restarts i can enter my password and then i have just a black screen with a mouse cursor.

also when i use taskmanager to startup devicemanager it doesn't show any exclamation marks in the list.

i have this computer for about 4 months now. just added the new monitor Samsung xl2370 to my setup (currently my second screen is at samsung repair center for RMA, but it's a p2370)

Is there someone who experienced the same problem here or does someone have the solution i would be glad to hear about that,

i didn't reinstall the computer yet the last time it happend. so i can search for something you might need for helping me to get a solution. is

Also my PC setup is entered, and exactly what i have in there. The memory is listed in the compatible list of ASUS. (KHX1600C9D3/6GX)

Let me know when more information is needed. mean while i'm trying to get the BSOD again with my camara pointed at my screen.

Also i can't generate the file with the perfmon /report command. it shows that it can't acces the destination file.

this is the second time i have this problem the second time was 2 days after the complete reinstall.

The number of processes that are listed is: 24
And almost all the service's that are listed ... Read more

A:BSOD Driver power state failure

  
Quote: Originally Posted by Sabertooth


Hello
I recently have some BSOD's wich lead in reinstalling windows completly,

They when i shutdown my computer, shutting down the computer takes ages, wich lead in BSOD with i think this mssg, the computer didn't make a minidump but did create the folder.

When the computer restarts i can enter my password and then i have just a black screen with a mouse cursor, when i task manager (ctrl+shift+esc) i can walk trough the folders to the minidump folder. but it shows up empty, I can't insert a usb stick in the computer nor can i use network capability's

also when i use taskmanager to startup devicemanager it doesn't show any exclamation marks in the list.

i have this computer for about 4 months now. just added the new monitor Samsung xl2370 to my setup (currently my second screen is at samsung repair center for RMA, but it's a p2370)

Is there someone who experienced the same problem here or does someone have the solution i would be glad to hear about that,

i didn't reinstall the computer yet the last time it happend. so i can search for something you might need for helping me to get a solution. is

Also my PC setup is entered, and exactly what i have in there. The memory is listed in the compatible list of ASUS. (KHX1600C9D3/6GX)

Let me know when more information is needed. mean while i'm trying to get the BSOD again with my camara pointed at my screen.

Also i can't generate the file wi... Read more

Read other 5 answers
RELEVANCY SCORE 98

Hello everyone,

My PC was running flawlessly until I woke it from sleep one day to find out that the USB keyboard and mouse and all other USB ports are not working. I figured ok I'll just restart. Well the restart hung at "Shutting Down..." for 5 minutes+ before I got a BSOD and the system eventually rebooted.

This happened a couple of times so I thought I should update all USB drivers and I did download the latest Intel drivers and installed them. This fixed the USB ports freeze after sleep wakeup, but if I use the PC after that for 5-10 minutes, I'll get a BSOD again which you'll see in the attached zip file.

In device manager, I was seeing an error with a driver called wirelesskeyboardfilter_01, but i researched that and found it had to do with HP drivers and I don't have any. I even followed a Microsoft article to fix wirelesskeyboardfilter_01 but the problem persisted.

I would like to know which driver is causing the BSOD so that I update it/fix it.

I did a memory test and it came back with no errors and in advanced power plan settings, USB selective suspend setting is Disabled.

I would really appreciate your help and I thank you in advance.

Read other answers