Over 1 million tech questions and answers.

Uninstall Windows Defender on Windows Server 2016

Q: Uninstall Windows Defender on Windows Server 2016

Hi All

There's something I've been thinking about recently that I would like to ask the forum for your opinions.

I run a lab at home with about 30 Windows Server 2016 servers. They all have Windows Defender installed and I have a Group Policy which enables/configures certain features like Cloud Based Protection. I never ever browse the internet from any of these servers (I use my desktop with my SUA account for internet activity) and I don't share my servers with anyone else.

What I was wondering is:

To free up memory on my cluster and to reduce disk IO I was thinking of uninstalling Windows Defender on Windows Server 2016 using Powershell as follows:

Remove-WindowsFeature Windows-Defender, Windows-Defender-GUI

Now obviously this would mean I would have no AV/malware on these test servers but since I don't browse the internet from any of these machines the risk should be minimal (note I said minimal as I do accept having no AV has its risks/downside which I accept).

I may keep Defender installed on some servers that have ports open from the internet like my mail gateway (anti spam etc) but besides this I can't think of any other reason to keep Defender installed. All servers are behind a pfsense firewall in different VLANs and have tight firewall rules controlling traffic between them.

I don't have any kind of third party AV/anti malware installed. Everything I download gets checked on my desktop before copying to any of my test servers.

Good idea to uninstall Defender? Bad idea to uninstall Defender?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Uninstall Windows Defender on Windows Server 2016

I recommend trying the free service from Zip Cloud. It's currently our users' favorite backup and storage solution and will save you headaches down the line.

You can get it direct from this link http://goo.gl/rFYDxc. (This link will open the Zip Cloud homepage.)

RELEVANCY SCORE 87.6

how i can uninstall or disable IE11 on Windows Server 2016?

Read other answers
RELEVANCY SCORE 80.4

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 70.4

Every since my computer received the April 7, 2016 "Definition Update for Windows Defender - KB2267602 (Definition 1.217.854.0)" my scanner can no longer send documents to my computer.  I have a Sharp AR-M257 copier/scanner/fax and it is
wirelessly connected to my computer.  Is there a setting that I need to adjust to allow the copier to access my computer?

Read other answers
RELEVANCY SCORE 70.4

Read the report very carefully and judge for yourself.

This is first test to be seen for Webroot in a very long time.

"MRG Effitas was commissioned by Webroot to conduct a comparative assessment. Webroot commissioned MRG Effitas for a comparative analysis of its Webroot SecureAnywhere Antivirus product, and Microsoft Defender."

https://www.mrg-effitas.com/wp-content/uploads/2016/06/Webroot_vs_Microsoft_report.pdf

Take note of where journaling and rollback does not\cannot revert system; Webroot marketing materials state this protection will revert system "perfectly."
 

Read other answers
RELEVANCY SCORE 70.4

I know WD has improved immensely on Windows 10. Panda I do not know much about however.
 

Read other answers
RELEVANCY SCORE 69.6

I am trying to add Windows 10 clients to Windows Server essentials 2016. It seem that in order for the server to see the clients I must the clients join the server server Domain. (Currently they are in a workgroup).

It looks like one has to change the Windows10 clients to access the WSE-2016 DNS. So in windows 10 I go to networks, bring up the adaptor setting. Bring up "Internet Protocol Version 4 (TCP/IvP4) and instead of "Obtain the DNS address automatically" change it to always get the DNS address on the WSE-2016 (found with ipconfig).
Then within Windows I use ?System?, ?about?, and Join the server DOMAIN. It now works. The client can now see the Server domain.
I can then see the Server files and the server can see the Windows 10 shared files.
There are still problems however.
When I reboot the Windows 10 client. I have a brand new user screen with only some of my original desktop icons showing. Do I have to essentially rebuild up everything on my desktop again!
Question: Is there not a way to have my original desktop appear when I am joined to the Domain.
Second, since there will be times when the server is off I used the router static DNS IP address as the alternative address in the above dialog box of the Windows10 clients. Seems to work since the client can access the internet even with the WSE 2016 off.
Here is my second question. I have a few home laptops as well. If I force the DNS to the server what happens when I travel. ... Read more

Read other answers
RELEVANCY SCORE 68.8

Hi,
I am aware that the latest MBSA version available is 2.3 which is not supported for Windows 10 and Windows server 2016. What is the best alternative for MBSA which can be used on Windows 10 and Windows server 2016 to identify the missing security patches.
-Coryos

Read other answers
RELEVANCY SCORE 67.2

Hi,

I have one machine running Windows XP and I am unable to make a connection via RDP to Windows Server 2016.
I have managed to make successful connection to Windows 2012 and even Windows 10 with latest build.

I have edited these registry keys
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa 
-adding tspkg
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders 
-adding credssp.dll
Also updated RDP client on winXP to 7.0 enviroment

I have tried 2 different machines with 2016 system.
The connection is not refused by any error (EventViewer is empty on both machines). RDP ask for credentials and then show message "Cant connect to the remote computer try it later" 
Do you have any ideas how to solve it ? 

Thanks for any help

Read other answers
RELEVANCY SCORE 67.2

I bought a pc without os installed, then bought an oem server license, where do I get the activation key from?

Read other answers
RELEVANCY SCORE 67.2

When I try to delete this program from the program files and program files(x86) folderes, I get a message that I need permission from TrustedInstaller to make changes.

So I went into the properties and changed the sharing settings, to share with myself of course. I have only been able to give myself permissions in one of the folders. After doing this, it lets me begin deleting. It begins going through several screens informing that it is a shared folder, that deleting it will affect other users...................but it eventually comes back to the message that I need permission to get rid of something on MY OWN computer!

I don't need this program and I want to get rid of it!

Please tell me if there is a way to do it!

A:Uninstall Windows Defender

you need to go to control panel/programs and uninstall the program; if it there in the list ,if it not in the list then don;t worry about the folder in program file

Read other 19 answers
RELEVANCY SCORE 67.2

The Windows Defender is supposed to be uninstallable but I can't find it in 'Add Remove Programs'. It is wrecking havoc with my trusted defenses. I see 2 versions of it as well in the 'All Programs' list and the icons seem dimmed.
 

A:How do I uninstall Windows Defender?

I've always been able to uninstall from Add/Remove . . maybe parts were already uninstalled . . you could try installing it, then uninstall if you don't want it.
 

Read other 3 answers
RELEVANCY SCORE 66.8

Running the following cmdlet on a Setting that is in the "NOTSET" state works fine, after setting it to Enable/Disable using the following powershell cmdlet:

Set-ProcessMitigation -System -Enable SEHOP

I get this error:
Set-ProcessMitigation : Destination array was not long enough. Check destIndex and length, and the array's lower
bounds.
At line:1 char:1
+ Set-ProcessMitigation -System -Enable SEHOP
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [Set-ProcessMitigation], ArgumentException
    + FullyQualifiedErrorId : System.ArgumentException,Microsoft.Samples.PowerShell.Commands.SetProcessMitigationsComm
   and



and I am unable to ever change the setting again using PowerShell commands. The same process works without issue on Windows 10, the issue only seems to exist on Server 2019. Changing the setting using the Windows Security GUI works as expected.

For other controls, such as DEP, CFG,  I still get the error, but the command applies the new setting properly anyway. So far SEHOP is the only setting that is unchangeable, but there may be others as we haven't tested extensively yet. It fails for both
System and App level settings.

Read other answers
RELEVANCY SCORE 66.8

I needed to install .NET 3.5 on Server 2016 but have hit all of the roadblocks and need help. Here is what I have tried so far...

I tried to add the feature via the server manager but it ended with code 0x80070002. I did have to provide a path to the sources\sxs folder for the cab file which I expected but that didn't help.I tried using the DISM powershell command to add the feature, both using the source location and also using /All so that it downloads the files from Windows Update. The end result was the same as #1 attempt - 0x80070002.I made sure all updates for the OS have been applied and that updates for 'other Microsoft products' was checked. this made no change in the error.I checked the installed packages via powershell and it shows 3.5 as removed, which again is expected for Server 2016 as they intentionally left it out but provided the cab file in the install media.I have executed a clean sfc /scannow with no errorsI have run a clean dism package commandI have tried installing under a fresh admin user profileI have researched for around 3 hours on the forums so I look forward to the various input
I have uploaded both the DISM and CBS logs. I started fresh with both logs so they contain only details related to a single attempt t install via the server manager.
https://my.pcloud.com/publink/show?code=kZQe4C7ZwcQKz9V82K06TsgYsl0DqkNg3wh7
Thanks for the help!

Read other answers
RELEVANCY SCORE 66.8

Dear IT Pros,
I have 2 questions that need your help and professional advice.
1) Does Microsoft has a tool to check whether a patch (KB) was superseded by another KB? In my case, I'm trying to search whether this KB4022715 and KB4025339 (both of this KB was released in 2017) was superceded
by another KB. This is because a security consultant has advised us to install both of this KB to prevent vulnerabilities but since it was released back in 2017, I suspect there must be a newer KB that supercedes it
2) Can advice what KB I need to download regarding this 2 bulletin ID CVE-2017-5715 and CVE-2019-11135? Can't seem to find it after much googling

Thanks in advance for the help

Read other answers
RELEVANCY SCORE 66.8

I was wondering if there are any known issues or any compability problems if I want to run windows 2016 Server on a Lenovo ThinkPad T480 20L5. It's meant to act as a probe to monitor traffic in a server room but needs to be small and mobile. Hence my question. Thanx =) Magnus

Read other answers
RELEVANCY SCORE 66.8

Hi,
My objective is to run the tool and analyze the security and software patches on server or computer and produce a list of recommended install.
I read that MBSA (https://docs.microsoft.com/en-us/windows/security/threat-protection/mbsa-removal-and-guidance) only supports up to Windows Server 2012R2.
Is there any tools that support Windows Server 2016 ?
I used WUA and it can't run on some of the computer.
https://docs.microsoft.com/en-us/previous-versions/windows/desktop/aa387290(v=vs.85)
Then, explore Microsoft Security Compliance Toolkit 1.0 but lack of instruction. Not sure it can do the job or not.

https://www.microsoft.com/en-us/download/details.aspx?id=55319
Do you have any recommendation on how I can get started ? Thanks.

Read other answers
RELEVANCY SCORE 66.4

how can i reinstall windows defender on windows 8

A:uninstall/reinstall windows defender

STOP CROSSPOSTING.
Follow http://support.microsoft.com/kb/931849/cs?wa=wsignin1.0
M.

Read other 3 answers
RELEVANCY SCORE 66.4

How do i uninstall it and i know it can be done.??????

A:I have Windows Defender Disabled, now i want to uninstall.

Delete it using a partition manager like free Partition Wizard bootable CD, or clean the HD using DISKPART: Disk - Clean and Clean All with Diskpart Command

Read other 9 answers
RELEVANCY SCORE 66.4

hello e1, does anyone know how to uninstall windows defender from windows 7. ive tried to disable and stop service but its still there. i want to get rid of it because it keeps popping up at log on telling me to "start now", then after about 5 sec it starts on it own. please help. tyvm
 

A:Solved: windows defender uninstall

It can't be removed unfortunately but try the instructions found here: http://www.simplehelp.net/2009/03/11/how-to-disable-windows-defender-in-windows-7/

Let us know if that helps.
 

Read other 2 answers
RELEVANCY SCORE 66.4

(uninstall not just disable)
Hello,
now I realized that I'd really like to get rid of this thing for good. It's already disabled but it still occupies some space nd maybe it's part still running in background. Once I had some instructions about uninstalling Windows Messenger from XP by hacking come config file and showing the component in Add/remove Windows features dialog. But i don't remember how this was done. Now need the similar thing about Defender and Security Central and UAC if possoble.

A:Completely uninstall Defender from Windows 8.1, possible?

Hello Anakunda,

These are all part of the OS and cannot be uninstalled. They can only be turned off instead.

Windows Defender:
It is recommended to have an AV program installed if your not going to use WD to help keep your system safe. When WD is turned off, it doesn't use any resources on your computer other than the bit of hard drive space for it's files.

Windows Defender - Turn On or Off in Windows 8
UAC:
You can safely set UAC to "Never Notify" to stop most notices. It is not recommended to completely disable UAC in Windows 8 by setting the EnableLUA DWORD to 0 like in the red warning box in the tutorial below though. If you do, it will break all modern apps, and prevent them from being able to be opened.

User Account Control (UAC) - Change Settings in Windows 8
Hope this helps some,
Shawn

Read other 11 answers
RELEVANCY SCORE 66

We have a 2016 server and BITS service getting stopped automatically after 2 minutes, We have done the troubleshooting like restore system health, sfc
/scan now and rename the software distribution and cat root but issue still same?

Read other answers
RELEVANCY SCORE 66

Hi there,
I am currently testing the working of Microsoft Advanced Threat Analytics. I have two virtual machines running windows server 2016 TP4. One VM for ATA Center, Second for Gateway. All the prerequisite steps are configured and port mirroring is working fine.
When i try to install Center setup the message come that " The specified Program requires newer version of windows"

I want to know that does Microsoft ATA supports windows server 2016?
Regards,
Pratik

Read other answers
RELEVANCY SCORE 66

Not able to Install OS on HP Proliant DL20 Gen 9 Server, HDD not detected in Logical Drive..

Read other answers
RELEVANCY SCORE 66

Download: Windows Server Technical Preview | TechNet Evaluation Center

Release Notes: Release Notes: Important Issues in Windows Server 2016 Technical Preview

Changelog: What's New in Windows Server 2016 Technical Preview 4

I may gonna test it out inside VMware
 

Read other answers
RELEVANCY SCORE 66

I have been trying for hours and cannot figure out how to setup, and configure the FTP properly. Anyone help?
 

Read other answers
RELEVANCY SCORE 66

I am getting this error on one DC, not alot out there that I can find on this error.


Faulting application name: mmc.exe, version: 10.0.14393.953, time stamp: 0x58ba5cff
Faulting module name: GPOAdmin.dll, version: 10.0.14393.1066, time stamp: 0x58d9f2af
Exception code: 0xc0000005
Fault offset: 0x00000000000be1c6
Faulting process id: 0x1120
Faulting application start time: 0x01d2b9ddb96a8ddb
Faulting application path: C:\Windows\system32\mmc.exe
Faulting module path: C:\Windows\System32\GPOAdmin.dll
Report Id: 72683f7e-ea63-4447-8373-4e7c2c33e883
Faulting package full name: 
Faulting package-relative application ID: 

Read other answers
RELEVANCY SCORE 66

Buen dia, estamso configurando nuestro sistemas en web nos están pidiendo reinstalar IE11 en WS2016, el problema es que no encontramos donde puede estar esta opción y en internet no hay información al respecto........

Read other answers
RELEVANCY SCORE 66

Source One: System Center 2016 to launch in September

"We are pleased to announce that Microsoft System Center 2016 will be launched at the Microsoft Ignite conference in late September."​
Source Two: Windows Server 2016 new Current Branch for Business servicing option

"Windows Server 2016 is the cloud-ready operating system that delivers new layers of security and Azure-inspired innovation for the applications and infrastructure that power your business.

New capabilities will help you:

Increase security and reduce business risk with multiple layers of protection built into the operating system.
Evolve your datacenter to save money and gain flexibility with software-defined datacenter technologies inspired by Microsoft Azure.
Innovate faster with an application platform optimised for the applications you run today, as well as the cloud-native apps of tomorrow.
Windows Server 2016 includes 3 main editions:

Datacenter: This edition continues to deliver significant value for organisations that need unlimited virtualisation along with powerful new features including Shielded Virtual Machines, software-defined storage and software-defined networking.
Standard: This edition is ideal for organisations that need limited virtualisation but require a robust, general purpose server operating system.
Essentials: This edition is designed for smaller organisations with less than 50 users.
These editions will be available for purchase on the October 2016 price list... Read more

A:Windows Server 2016 to launch in September

Nice share @Huracan wonder if it is going to be more secure than Windows 10.
 

Read other 1 answers
RELEVANCY SCORE 66

I am currently having an issue were Windows 7 computers can not connect to Server 2016 (domain). Right away I get a "The logon attempt failed".
I know that user information is correct, because I can connect using any Windows 10 computer. I have tried this from multiple Windows 7 computers, they all give the same error. I don't have any problems at all with Windows 10.

So, this seems to be isolated to Windows 7.
Has anyone seen this or know how to get around this issue?

I appreciate your help!
 

Read other answers
RELEVANCY SCORE 66

Hi, we are becoming more and more frustrated with the forced windows updates. These may help home users but professional products like servers are not for everyday users and sometimes require alot of configuration to get legacy applications to work.
Windows will at times force updates no matter what we choose in respect to disable them. It is NOT up to Microsoft to determine if or when the servers I am responsible for need to be patched. Any reading and research we have done here has only yielded the
ability to prolong the updates. Once installed over 50% of the servers give an endless spinning circle and require restore or rebuild, this has become unacceptable and has forced us to start testing our applications with different Linux flavors.

Is there a way to STOP the updates indefinitely?

Read other answers
RELEVANCY SCORE 65.6

Everytime i try to instal windows defender and reinstall it it give me a msg saying that its not able install ..what do i do?

A:Windows Defender Will Not Uninstall & Reinstall Properly

Are you on Vista or XP?

Read other 3 answers
RELEVANCY SCORE 65.6

What would suggest I do, McAfee came pre installed on my HP Laptop. My "free" subscription ends in a few days and I noticed that my Windows Defender does NOT work. It is grayed out because of McAfee as I have learned reading other posts on this board.
Other AV programs have this effect on Windows Defender in many cases.
I guess my question is how do I get Windows Defender working after I uninstall McAfee?
Thanks

A:how do I get Windows Defender working after I uninstall McAfee?

Originally Posted by Heshie75v


What would suggest I do, McAfee came pre installed on my HP Laptop. My "free" subscription ends in a few days and I noticed that my Windows Defender does NOT work. It is grayed out because of McAfee as I have learned reading other posts on this board.
Other AV programs have this effect on Windows Defender in many cases.
I guess my question is how do I get Windows Defender working after I uninstall McAfee?
Thanks



Soon as you remove McAfee, Windows Defender should come back on ....they won't run at same time.

Read other 5 answers
RELEVANCY SCORE 65.6

Hello, please I would like to know how to uninstall Windows Defender updates to free SSD space, because i can?t find the update to uninstall in the Installed Updates section(that you get to by clicking unistall updates/programmes).
I only see updates like KB and such...

But SpaceSniffer is showing, that i have 477mb ocupied thanks to windows defender- but i can?t seem to be able to get rid of it. I don?t want to uninstall it(i know it can be done with CMD) i just want to uninstall the updates! And even remove the scans if possible. Thanks

A:How to uninstall Windows Defender updates?!(500mb+)

Hello coregamer, and welcome to Eight Forums.

I'm not sure that you can uninstall them like that.

If you haven't already, you could use the tutorial below to cleanup old out of date Windows Updates that have been superseded by later updates to help free up some space.

Windows Update Cleanup in Windows 8

Hope this helps some,
Shawn

Read other 3 answers
RELEVANCY SCORE 65.2

Windows server 2016 activation error 0xc004c020
 in Virtual server environment how can I fix this

Read other answers
RELEVANCY SCORE 65.2

We are using approx 10 server of windows server 2016 for diffrent application so please suggest for basic hardening 

Read other answers
RELEVANCY SCORE 65.2

Just bought new Spectre x360 convertible computer with Windows 2016. Left computer idle for a few minutes (15) and returned to screen saver.  Clicked on the enter button to get to password screen and entered password.  After entering it, the wheel of death started and kept spinning.  When I tried to turn the computer off, I may have accidentally hit stand by mode.  Then the screen started flashing.  I quickly unplugged everything.  It did come back on and I didn't lose anything.   What should I do so that this doesn't happen again?

Read other answers
RELEVANCY SCORE 65.2

Historically I've used the following syntax with NetMon to determine which switch/switchport each of my server interfaces are connected to: 

nmcap.exe /network "<interfacename>" /DisableLocalOnly /capture SNAP.EtherType == 0x2000 /StopWhen /TimeAfter 2 min /file "<filename>.cap"

With MMA, I can just do a filter for LLDP, and get the same information, at least on my Windows 10 laptop that is.  When I run a capture either locally on a Windows 2016 server, or remotely against
a Windows 2016 server there are no LLDP packets captured.

Am I doing something wrong?

Read other answers
RELEVANCY SCORE 65.2

I've recently installed KB4467864 on my 2016 Datacenter SQL server and now when I try to login it just goes black. No GUI no errors. I've rebooted, I've tried safe mode, I've cold powered down and booted up and nothing fixes this. This is my 2nd server 2016
SQL server VM I've installed it on and both have the same issues. I have a Server 2016 datacenter SQL box that I hadn't installed this on yet and it works just fine. Last update it has is KB4467691. 

Anyone else seeing this? Or what else can I do to fix it? I've even tried stopping SQL server and agent to see if that would do it, but no difference. Please help I do not want to rebuild this SQL box. Thankfully its not quite in production yet but this
will put us behind if I have to redo the OS. 

Thank you!

Read other answers
RELEVANCY SCORE 65.2

Hi there, I am looking for Network drivers for the ThinkCentre M720s for use in Windows Server 2016. The reason for this is to allow a group of users to RDP into the PC in order to use an application. I have another PC of the same Modle type which shows Intel 219-V Network hardware installed, but cannot find the drivers needed for this. Any pointers most welcome!

Read other answers
RELEVANCY SCORE 65.2

Microsoft (R) Windows Debugger Version 10.0.17134.12 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Netlinkbackup\Desktop\MEMORY.DMP]
Kernel Bitmap Dump File: Kernel address space is available, User address space may not be available.


************* Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 10 Kernel Version 14393 MP (32 procs) Free x64
Product: Server, suite: TerminalServer SingleUserTS
Built by: 14393.2273.amd64fre.rs1_release_1.180427-1811
Machine Name:
Kernel base = 0xfffff803`0b294000 PsLoadedModuleList = 0xfffff803`0b59b160
Debug session time: Fri Jun 15 15:59:32.052 2018 (UTC + 5:30)
System Uptime: 0 days 2:21:31.845
Loading Kernel Symbols
...............................................................
................................................................
.......................................
Loading User Symbols

Loading unloaded module list
.............
*********************************************... Read more

Read other answers
RELEVANCY SCORE 64.8

I have windows 8 x64 that came preloaded with trial McAfee. Uninstalled after trial and security screens inform Defender turned off. Selecting to turn off does not configure the change. What is easiest way to fix issue and "move on" ?

A:Unable to turn on Windows Defender after McAfee Uninstall

Run regedit.exe, go to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender

and change the values from DisableAntiSpyware and DisableAntiVirus to
1.
"A programmer is just a tool which converts caffeine into code"

Read other 4 answers
RELEVANCY SCORE 64.8

I noticed that after installing Microsoft Security Essentials, Windows Defender has been turned off.

So if it is not being used .. How can it be uninstalled?

Thanks
 

A:How to uninstall windows defender from windows 7

Read other 8 answers
RELEVANCY SCORE 64.8

Hi Team,

I have a situation, where, we have commissioned new Windows Servers 2019 in our DMZ zone.

We manage Windows Defender Antivirus from SCCM server. Since the new servers are in DMZ, our SCCM server cannot push Antimalware policies to the server.

I have exported the required Antimalware policy. Is there any way, where I can import those settings in these servers manually?

Thanks,
Balaji R

Read other answers
RELEVANCY SCORE 64.4

Hello everybody
So  have this problem/question, so  have
a windows server 2016 standard evaluation  14393.rs1_release170731-1934,
and  have  two
updates KB3211320 and KB3192137, and the windows  me uninstall the updates, doesn't not even appear the button "Uninstall",
anyone knows how to remove this?

thank you for your help :)

Read other answers
RELEVANCY SCORE 64.4

I am trying to install Windows Server 2016 Datacenter (new installation) on a RAID 0 (Striped Drive). The RAID system (Hardware RAID; Gigabyte z390 D) is configured on two SSDs (1 TB each).

Windows installer detects the RAID-Drive (of about 2 TB) and can create partitions on the drive and format them normally. The installation, however, is not possible on this drive (windows can not be installed on this drive).
I tried to download the preinstall-RAID-drivers and add them to the installer using USB-stick but it does not solve the problem. 
I am not sure whether I missed something at this point or even if this is possible to be acheived anyway. 
I appreciate your help.
Best regards

Read other answers