Over 1 million tech questions and answers.

compaq presario 4660

Q: compaq presario 4660

Hello:
I'm making some changes to a compaq presario 4660 (dinosaur) and it's running windows 98. I cannot get into bios. F2, F1, delete and Tab do not get me in. I searched on google and really didn't receive good results. Well it did say that F2 would get me in, but it does not. Seemed to me there was another way to get into bios?

RELEVANCY SCORE 200
Preferred Solution: compaq presario 4660

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: compaq presario 4660

Read other 16 answers
RELEVANCY SCORE 106

Hello
Dinosaur Compaq Presario 4660 on windows 98.
Won't boot. The power is on, but there's no beep.
The hard drive doesn't seem to spin, but there is power to all the peripherals.

Thoughts on a solution? I took off the cover and couldn't find a bad connection.

Thanks
Shannon
 

A:Compaq Presario 4660 Won't Boot

Sounds like its not even reaching POST (Power On Self Test)

To start to boot, the power supply must reach the correct state and issue a Power_OK signal to the motherboard, within a preset time (about 0.7 seconds).

This is detected by the motherboard which resets the CPU and allows the boot process to start.

But, if there is a problem with the CPU or motherboard, the reset will not happen either.

So the problem could still be the PSU, or the CPU, or the motherboard, or 1500 other bits.

There is no easy way to find the problem apart from substitution by replacement at the end of the day. The HDD not spinning up does tend to point to Power Supply Unit first though.
 

Read other 1 answers
RELEVANCY SCORE 61.6

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

Read other 1 answers
RELEVANCY SCORE 61.6

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

Read other 1 answers
RELEVANCY SCORE 60.8

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

Read other 14 answers
RELEVANCY SCORE 54

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

Read other 3 answers
RELEVANCY SCORE 54

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

Read other answers
RELEVANCY SCORE 54

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

Read other 8 answers
RELEVANCY SCORE 54

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

Read other 6 answers
RELEVANCY SCORE 54

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

Read other 16 answers
RELEVANCY SCORE 54

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

Read other 9 answers
RELEVANCY SCORE 54

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

Read other 1 answers
RELEVANCY SCORE 54

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

Read other 3 answers
RELEVANCY SCORE 54

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

Read other 1 answers
RELEVANCY SCORE 54

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

Read other 1 answers
RELEVANCY SCORE 53.2

Hello sir, I have a problem in bios password. I tried to reset cmos by removing rtc battery. But i can't remove password. System disabled code is 07437. Thanks, MNKTags:Microsoft Windows 7 (32-bit)Presario V3000

A:Compaq presario v3000

@Ulies? Enter   zyaztrq    or    alqelqe REO

Read other 1 answers
RELEVANCY SCORE 53.2

Hello. A buddy of mine has an old Compaq Presario 7470 that he is putting a new mobo in. Apparently, the old case has color-coded front panel wires. He has separated the wires and now he does not know which ones go where (in terms of going to reset button, power button, Etc). We have looked everywhere on the net for some sort of schematic for the Compaq case to figure out the color-coded wires. However, not even Compaq site has any info. Also, to note, the wires apparently terminate on some sort of small printed board before going to the lights and buttons. If anyone has any ideas I would appreciate your help.

Thank you,
LS
 

A:Compaq Presario 7470

The front panel wireing is one problem with trying to put a non Compaq board in a Compaq case . . the power supply may be another . . a lot of the OEM's use a proprietary Power supply with non standard connectors.

You might be able to Google Compaq Front Panel connectors to see if someone has worked it out ( i know of one guy who did for Dell )

He will almost certainly be better off buying a new case for the new board, and using whatever hardware he can with the new system.
 

Read other 3 answers
RELEVANCY SCORE 53.2

Hi, how do you restore to factory settings a (COMPAQ PRESARIO SRI617CL)?

A:(COMPAQ PRESARIO SRI617CL)

If this computer has a Recovery Partition, when you boot the computer on the logo screen you should see a message Press F2 for setup and Press X for Recovery (X being F11 or whatever key it says) If you don't get that message, then this computer does not have a Recovery Partition (if you can still boot the computer you can look in Disk Management to see if there is a drive called Recovery)
Other then that you will need the recovery discs you made when you got the computer. How to Run Compaq Recovery Disk | eHow.com

Read other 1 answers
RELEVANCY SCORE 53.2

Right heres a very specific enquiry...

I have a Compaq Presario SR2125UK

Im looking to upgrade the graphics to a BFG 8800 GTS OC 320MB or the 640mb.

First question is can my processor handle it? (Intel Pentium D 915)

I know i have to upgrade the ram so im purchasing 4GB of DDR2 RAM for about £50 and im replacing the PSU probably with an OCZ Stealth 600W PSU. Do that sound viable? Ive only got 32bit windows so i know im loosing out on some ram but its a package deal lol.

I have tried reading into all the requirements for these upgrades such as power connectors from PSU to graphics card and motherboard and think i got a bit lost.

The BFG requires 12v of something which the OCZ provides along with more than enough power (425w required for BFG), plus both the motherboard and the PSU are PCI express compatible. And i have an extra slot to accommodate the doubledecked size of the BFG.

In terms of the required power connectors i was a bit lost. The OCZ said it has a 6/8 PCI express pin which is what the BFG requires but can somebody shed some light on this?

But im really just concerned that it was going to fit and work!

These purchases come to around about £150 so dont want to be thinking for another 100 squid i could have just bought a XBox 360! lol

Basically Im asking advise on the above upgrade decisions and any tips anyone has on installing these?

Any help would be appreciated, im sick of only being able to run pre-2005 games on a pc bought in 2007! I was pretty suc... Read more

A:Upgrading my Compaq Presario

Read other 16 answers
RELEVANCY SCORE 53.2

I have a Compaq Presario, Authentic AMD K-6 3D Processor.
In order to run DirectX 8.1 for my 5 year old to play his new TONKA games, I need to upgrade the video card. I have looked on the TRIDENT website (with no success) and was wondering if anyone has a newer version than I have. This is what I have:

Trident Blade 3D/MVP4 (63)
Trident Microsystems
Chip type: Blade 3D/MVP4
main driver trid_p3d.drv
v. 4.12.01.2214
Mini VDD: trident.vxd
VDD: *vdd, *vflatd
 

A:Compaq Presario 7360

Read other 6 answers
RELEVANCY SCORE 53.2

Just throwing this out in case someone can help

I have a Compaq Presario 5461 and when the hard drive crashed I got a new hard drive off ebay (same model the pc came with). When I try to use the compaq restore disk, i get an error that pretty much says restore can't be run on that machine. I realize that these restore disks are somehow keyed to the machine so you can't use them on another machine, but all the hardware is the same except for a little more memory. Only thing I can think of is a bios update that I applied. Did that alter the "signature" of the PC. If so, would it work if I backed of the bios update?

At this point the pc is just a toy, i'm using it to learn more about hardware, etc. I was able to install windows and just used my license key that came with the computer, so thats not an issue. But it bugs me that I can't get this restore to work. I did also notice that PC does not have an asset tag - wondering if the bios update zapped that.

Other notes - there was no extra partition that I know of on the orig hard drive, and there is only one restore CD (no diskette). I was able to do a restore of the pc several years ago
so I am pretty sure the disk is not defective.

Any help or thoughts would be appreciated
 

A:Compaq presario restore

a different hard drive than the one the pc came with shouldn't alter the restore process.
What error is it giving you?
 

Read other 4 answers
RELEVANCY SCORE 53.2

I need help I have a Compaq Presario R4010US Laptop. The keyboard does not work for some reason, I plugged an external usb keyboard into it and it works fine. Could the ribbon cable that goes from the keybd to the motherbd be bad?

Fwilli2

A:Compaq presario R4010US

hi Fwilli2 welcome to TSF,

take the keyboard off and re-seat the ribbon cable. you might want to try uninstalling the keyboard from device manager and then restart computer see if it work before you take keyboard out.

Read other 6 answers
RELEVANCY SCORE 53.2

Appreciate some assistance.

Anyone know how much memory the Compaq Presario EZ 2605 (out of the box) had?

Believe its processor is an Intel Celeron 633MHz.

Trying to help someone out who knows very litttle about computers and cannot tell me how much memory the pc has. (He does not understand how to look up the info in My Computer/Properties, etc.)

Asked Compaq a week ago, but still no answer.
 

A:Compaq Presario EZ 2605

Manufacturer Compaq
Model Presario EZ 2605
Maximum Memory 512MB
Standard Memory 64MB removable
Number of Slots 2 (2 banks of 1)
 

Read other 3 answers
RELEVANCY SCORE 53.2

My landlady's Compaq Presario SR1103WM is acting up and I'm pretty certain it is the PSU going out because the symptoms are the same as my PC had when it's PSU went belly up on me. It starts booting up fine until Windows XP Home starts loading, than it resets. I used a WinXP disk to repair the boot files and MBR with no effect, so we decided to reinstall Windows (been needing to do that anyway). Before doing that though, I was going to try recovering pictures of her grandkids by using a Linux Live CD, and ran into the same problem with it, so that eliminated Windows problems.

To the best of my knowledge, that leaves the PSU (likely) or the memory (possible) as the probable causes. I running Memtest86+ on it tonight to eliminate that cause.

Please correct me if I'm wrong in my diagnosis or if I am missing anything, but if I'm right about the PSU, that brings me to my main problem. I have heard that many Compaq models have proprietary PSUs so that you can't use off-the-shelf parts to replace them and have to buy one from them at a higher price. Is that the case with this model or can I order one from Newegg? I looked up the PC on Compaq's web site, and it didn't even say what PSU it has.

Thank you in advance.
 

A:Compaq Presario SR1103WM PSU

Memtest86+ has compleated 34 cycles with zero errors. Looks like it is the PSU.
 

Read other 1 answers
RELEVANCY SCORE 53.2

My Compaq M2000 Presario fan will not work. I have even bought a new fan and it still does not work. Is there a thermal switch on the motherboard that i could use to turn on the fan. Help is much apreciated.
 

A:Compaq M2000 Presario Fan Help

Read other 6 answers
RELEVANCY SCORE 53.2

i want to upgrade my computer so it can run windows xp and i'm not talking about minimum stuff i want to try and get da best out of windows xp, so wut should i upgrade?
 

A:Compaq Presario EZ2207

Read other 8 answers
RELEVANCY SCORE 53.2

i have a compaq presario 3630AS desktop. It came with quick restore CDs and a recovery CD. If i have to re-install win xp should i use quick restore CD or the other ????? Pls help

A:compaq presario 3630AS

Compaq Recovery CD options
The Compaq Recovery CD enables you to restore your system files from a separate partition on your hard drive. The four options on the Recovery CD are listed below.

Restore option Description
Emergency Diskette Creating this diskette is important as it allows you to save your computer's unique setup information for use in the event of an emergency. Store the diskette in a safe place.

User Backup Backs up all information and files on your hard drive and stores them in a separate partition on your drive.
User Restore Restores your hard drive to the state it was in when you last used User Backup.

Factory Restore Restores your computer to its original factory-installed software state.

Read other 1 answers
RELEVANCY SCORE 53.2

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

Read other 1 answers
RELEVANCY SCORE 53.2

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario LAPTOP

Google Compaq for a contact number - ask them to send you a manual..
 

Read other 1 answers
RELEVANCY SCORE 53.2

Hello - I am attempting to get an old Compaq Presario 9546 that I obtained work correctly. I am, however, at a loss to figure out what the heck is wrong. When you boot the computer, it does the RAM check, and appears to skip past all BIOS functions (I can't go into BIOS setup... it does not exist) and then all it says is "Non system disk, please replace and press any key" - which, BTW, I have no disk in at all. When I DO put in a system floppy, it will boot from the floppy but not aqnowledge that anything else but the floppy is hooked up to the computer (I have 2 hard drives and a CD rom drive - all with the correct jumper settings). Any ideas? If I could just get BIOS to come up, I could probably fix it myself...
 

A:Compaq presario 9546 help

Read other 8 answers
RELEVANCY SCORE 53.2

I have a compaq presario and that is in serious need of a new processer. The one I currently have is a cyrix M II-366 at 250mhz. I origenally had plans to overclock it but I feel it would be best to leave it be and buy a new processer. what I wanted to know is would I have to buy a new motherboard inorder to upgrade it to 1gig? By the way, you would'nt happen to know why it says 366 and runs at 250. All your help is greatly appreciated.
 

A:upgrading compaq presario

Look in your manual. Compaq has the upgrade path documented very well in it. I really doubt your FSB is at 250MHz tho
 

Read other 1 answers
RELEVANCY SCORE 53.2

Hi Guys,

I am trying to install a Cyberdrive x16x12x40 CD-RW into a Compaq Presario 5000 series PC. If no other device is attached to either the IDE or to the power supply, and if the CD-RW isn't attached to the IDE then power will get to the CD-RW. If the CD-RW is attached to the IDE and/or any other device is attached then no power goes to the CD-RW.

Can anyone shed any light on why this is and how I can fix it.

Cheers
Garth
 

A:Installing CD-RW in Compaq Presario

Read other 14 answers
RELEVANCY SCORE 53.2

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32
Is there anything I need to know befor I do this?
I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need that
I ran the malware and found 16 viruses. A lot to do with tool bar locations or something.
The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.
I did find that it runs like new in safe mode if that helps.
Please help
Paula

A:Compaq Presario very slow

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32Is there anything I need to know befor I do this? I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need thatI ran the malware and found 16 viruses. A lot to do with tool bar locations or something. The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.I did find that it runs like new in safe mode if that helps.Please help PaulaIf you have all of your pic`s, music and anything else of importance backed-up then you are all set.You probably did not get any discs with the computer. The D: drive is a "restore partition" = RP. This is an exact image of your computer when you first bought it. To use it: When you first start the computer there will be a black screen with probably three different choices of keys to press. One of them will be something like system restore or restore. Hope you get the idea. Select the proper key and follow the onscreen prompts.One other option may be to go to the HP\Compaq (HP bought Compaq) site or call them. You may be able to get the discs for a small fee.

Read other 1 answers
RELEVANCY SCORE 53.2

my mother bought a compaq presario 5304 from a family member.when she got it,there was no system recovery disk for it.there was a disk that was for the 700's series.her computer will not detect the right drive because they used the wrong recovery disk for it.how do we get the computer to recognize and install its original drive.it was 56k.i am pretty much computer illiterate.john
[email protected]
 

A:compaq presario 5304

hmm system recovery. I'm not too big on using that. My overall suggestion would be go into dos at the startup and do a simpe C:/ format or is it the other way doh... Anyways at startup of windows press oh F8 I believe for systems with win 98 or higher but if you got win95 its either f5 or f8 or you can make a boot disk and do it that way.
 

Read other 1 answers
RELEVANCY SCORE 53.2

i have a compaq presario SR5210NX with windows vista home premium ,it has a problem in/windows/system32/ntkrnlpa.exe,the state is 0xc0000225 and the information says the kernel doesnt responde or isnt working .it says introduce the installation disk windows ,but i dont have it and i couldnt enter to the recovery system

Read other answers
RELEVANCY SCORE 53.2

Here we go again, guess I am good at getting stuck on stupid, we bought five of these HP 'debranded' machines. I have a M2NBP-VM CSM mobo. I have almost everything working except the audio. Two errors in device manager PCI device and unknown device. I am suspecting that it has to do with audio since I can't get any audio going period. Yepper done the aau high def audio driver thing, chatted with HP support etc etc ran driver issues into the ground. I am using xp pro sp3, I know these things shipped with MCE and they say there vista ready.....hmmm but no xp drivers. So any of ya'all got some advice? thanx
 

Read other answers
RELEVANCY SCORE 53.2

 Hi, I'm searching where I can find Compaq Presario 5524 Desktop Operating System and recovery 

Read other answers
RELEVANCY SCORE 53.2

I have a Compaq Presario C74EM which I just installed Win 8 RP. The sound did not work.

Eventually I was able to find and install drivers - sound still didn't work, but after following the advice on a forum post, I put the computer to sleep, waited a few minutes, woke it up, and sound now works.

This computer came with Win Vista home. Supposedly the Compaq Win7 drivers will work with Win8. Compaq (hp) has utilities that will go through any/all drivers, and update to the latest.

Does anyone know how to get this going under Win 8?

Read other answers
RELEVANCY SCORE 53.2

hi,

i have one compaq c500,it's some keys are not working.i have to open it,i tried to open but can't , any one can help me.
 

A:compaq presario C500

Hiya and welcome to Tech Support Guy

I've removed your email address, as we reply to the forum, and putting it up may give you spam.

Can you explain a bit more on what you're trying to do? You say open it, do you mean log on?

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 53.2

hi,
I have a compaq Persario M2000. The other day, I was using the touch pad to move and it just shut off. I tried to turn it back on and nothing happens. When I look at the AC adaprter led it is not turned on and it is plugged in. I removed the battery and tried the same with no luck. the ac adapter led is still not light up. The battery is fully charged, and when i try just that nothing happens. I opened it up and removed the bios battery and checked the chips and circuits. nothing seems out of place ot burnt. I used a multi meter to check the power button and it is getting power, as well as the curcuits in the ac adapter
can someone help me or give me some ideas what my nxt step is?
thanks
 

A:Compaq Presario Will not turn on

I had similar problems with compaq laptops - it's the power supply in your laptop - the repair for that is about $300+

check your warranty before doing anything else...
 

Read other 2 answers
RELEVANCY SCORE 53.2

i have recently formatted my hard drive and reinstalled xp home, i have found all the necessary drivers etc but unable to use my mouse, on the device manager a yellow icon appears stating unknown device, iv searched everywhere for drivers etc but all came blank, i went to the compaq site and downloaded the mouse/keyboard driver from there but then got an error stating unable to find version of runtime to run this application '' iv downloaded the most recent .NET framework and still nothing, iv searched for more help but unable to find any results, anyone got any pointers if im doing something wrong ?

A:compaq presario S5600UK

What is the make and model # of your mouse?
In Device Manager, right click the Unknown Device and Uninstall it. Now remove the USB cable for the mouse from the computer end. And restart the computer. When the computer comes back up, plug in the mouse into the Back USB port of the computer and not the front or through a hub as these ports are weaker. It should install. if not, go to the mouse manufacturers support download drivers site and type in your model # and download the driver.

Read other 1 answers
RELEVANCY SCORE 53.2

I have a compaq presario 1650 laptop. It currently has a different language version of W98 installed. I want to format and reinstall the english version. The person I got the laptop from no longer has the compaq installation disk. Is it possible to format the harddrive and reinstall with the drivers that are located on compaq's site?
 

A:help with compaq presario 1650

As long as all the drivers are there, sure.

I've redone plenty of laptop machines. Just make sure the site has drivers for all the parts first, and get them all downloaded before you start.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

Read other 1 answers
RELEVANCY SCORE 53.2

What type of my RAM is cheap but works good for my tyoe of computer. I have no idea what to buy. There are different seriall numbers on the RAM. I am preatty sure I need DDR RAM but is that it?? Let me know plz =) Thankies.
 

A:Compaq Presario 5304 RAM?????

Read other 16 answers
RELEVANCY SCORE 53.2

I have a Compaq Presario running xp professional with a phone jack for internet connection(no Ethernet port). I would like to connect it to my att frontier modem that uses cat 5. I bought a j5 jue130 gigabit Ethernet adapter(that has a j45 to usb).I would like to know if this computer is capable of connecting to my service and if so how do I configure my computer. I loaded the correct driver for the adapter but can't get connection.
thanks

A:compaq presario 1200

Hello grafenwohr
Have you looked at using the computer with a wireless connection from your modem ?
 
Check with your Internet Service Provider for setting it as wireless.. Who is your ISP ?
 
Any Good ?

Read other 4 answers
RELEVANCY SCORE 53.2

Please i desperately need help, have got compaq presario 3015us(never buy it) P4/512ram/60 gb h.disk etc etc.... the problem started when i woulds scan norton antivirus, the system would juz freeze, tried it a lotta of times but same prob, then i started gettin error msgs sayin ISAAC.DLL error...then RUNTIME.DLL error.. then i wanted to restore it to a previous date, but there the calender would be stuck at oct and i wanted to restore it to september...

then i tried using the compaq recovery disk, the disk after 2 mins of running, would shut down the computer again, same thing happenned 3-4 times and next time gave some error sayin cant access drive H (dont have drive H) and enter but nothing happenned.... then i got my hard disk formatted but now ot shows "NO DISK SPACE" whereas i have 60gb and same problem of shutting down keeps happenning when the disk runs...pls help....

is it a prob with the motherboard or hard disk or juz something else....pls pls help!!!!
 

A:COMPAQ PRESARIO 3015us(HELP!!!!!!)

hmmm, when you formatted the hard drive, did you FDisk it prior? When I worked for Gateway tech support, we had a little saying, "if nothing else, then FFR"... which meant FDisk, Format, THEN reinstall OS, in that order. Give that a shot with a windows ME bootdisk. You can find the download at bootdisk.com
 

Read other 1 answers
RELEVANCY SCORE 53.2

I replaced my LCD cable (with two different cables) from the the stock one because it wouldnt fully display if not pushed all the way back. When I replaced the cable I put it all back together and it comes on without the previous problem but now it displays 4 identical screens like. 1 23 4I have tried updating the drivers for the video chooser and have even loaded previous drivers but to no avail still 4 screens. Can anyone help me out?

Read other answers