Over 1 million tech questions and answers.

Screen Image Disappears at Startup

Q: Screen Image Disappears at Startup

This is a 2013 Toshiba Lx835-D325 all-in-one with a 3rd generation Intel i7 CPU. Originally had a 2 TB HDD and takes a 180 watt AC adapter.

The screen shows a "no media found" message for 5 seconds when first engaged by attaching the AC adapter plug, then fades back to a black screen. The power button starts the machine but no display image is revealed unless detaching and then re-attaching the power plug. The power button lights and starts the computer but fails to engage a display image. Could it be the power switch? The small power switch board is shown in the last picture.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Screen Image Disappears at Startup

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 67.6

Two problems, related in timing.

On July 1st, I made some adjustments to my startup config and such, and ever since then I've been having problems where my IE and Windows Media Player freeze for a few seconds when loading (though without interrupting data)


But most important of which is that since that time, my HP Factory Image D:\ drive has disappeared. It never served me any purpose, but it always just sat there in my Hard Disk lists on my Computer screen, and is conspicuous in its absence.


I checked my Disk Management and found that the 12 GB where the "D" drive was had become "Unallocated". Before I did something stupid, I checked to Rescan Drives, and it re-found the Factory Image! From then on, the FACTORY_IMAGE (D shows up in my Computer.


But after a few days I found that it was no longer showing on my Computer window, and realized that after restarting or shutting down my comp, it would always disappear, only to re-appear when I rescan my disks.



What's the problem? What service do I need to restore/fix to stop this from happening?




Somewhat related question: Would getting a whole new motherboard and CPU but retaining the old harddrive end these problems mentioned above or is it something to do solely with my faulty configurations?

A:Adjusted startup: HP Factory Image drive disappears after each restart

before you start spending money or mess your machine up any more--go into MSCONFIG and select the normal startup button then restart to see if problem(s) are gone

Read other 2 answers
RELEVANCY SCORE 64.4

Hello,

The issue I'm having is small, but I still would like it fixed because it's a small pet peeve of mine.

When I move my applications around the window disappears with a gray box around it, until I drop it. I've attached an image of the problem, because it's easier to show than explain.

Any help is greatly appreciated and thank you for your time

A:Application image disappears when moving it around screen

Hello Xed,

In Control Panel > System > Advanced System Settings ....
See if you have "Show window contents while dragging" checked.
If it is not checked, check it and see if that fixes the issue.

Read other 9 answers
RELEVANCY SCORE 56

These aren't very important problems, but I'm just curious why this happen after Anniversary Upgrade.
- When I start my PC or when I shutdown/restart, in the log screen there isn't my profile image. Just the generic blank one.
The image is still present when I click on Start button on desktop and in Control Panel. I also tried to set it again.
- I prefer a "blank" lock screen background as I had before, with no panorama pictures or nothing. How can I remove it?

Read other answers
RELEVANCY SCORE 53.6

I can change the lock screen image from Settings > Lock Screen without any problems and when I lock the computer my intended lock screen image is the one I chose, but when I boot the computer up or sign out the lock screen image is always some default W10 image.

I'm using W10 Home with the latest updates. I have the background on the lock screen settings page as "picture".

I've read that there's actually two separate lock screens: a default/welcome lock screen and a user lock screen. I'm guessing the one on startup and after a sign out is the default/welcome lock screen, but I can't find how to change it.

Read other answers
RELEVANCY SCORE 51.2

I'm working on a Powerbook with OS x.3 Jaguar, classic mode 9.2.
When working in Photoshop 6 in classic mode, the cursor (tools), disappear over the image, but then reappears outside the image. However, the move tool and the cropping tool act normal.

I've trashed the Photoshop prefs, reset the tools, and re-installed the software. Is there something else I can try to solve this perplexing problem?

Thanks, Mindy
 

A:Photoshop 6 cursor disappears over image

is it just certain tools that you can't see? eg pen tool or paintbrush? Your paintbrush size might just be so small (eg 1 pixel) and your image so large that you just can't see it, unless you're zoomed in of course. Try upping the size of the tool if so.
 

Read other 3 answers
RELEVANCY SCORE 51.2

Hello/ help!
When I download images from the web the longer they display on the screen the more the quality starts to disappear.

You can especially see it along the edges, as you watch the image, after about an hour the image is so grainy that it no longer looks like the original image.
 

Read other answers
RELEVANCY SCORE 50

Hi GuysI need some help with something strange that going on with my computer. after i remove some of my programs from the laptop , my desktop started to disappear and than reappear for 10 seconds and so on. I tried to use system restore but there where no earlier restore points. i have attached a hjt log file. thanks, yamihami.Deckard's System Scanner v20071014.68Run by hamir on 2008-04-12 12:31:00Computer is in Normal Mode.---------------------------------------------------------------------------------- System Restore --------------------------------------------------------------Successfully created a Deckard's System Scanner Restore Point.-- Last 5 Restore Point(s) --8: 2008-04-12 04:31:08 UTC - RP98 - Deckard's System Scanner Restore Point7: 2008-04-11 05:15:55 UTC - RP97 - Restore Operation6: 2008-04-11 04:26:19 UTC - RP96 - Last known good configuration5: 2008-04-11 04:26:11 UTC - RP95 - Software Distribution Service 3.04: 2008-04-11 04:26:10 UTC - RP94 - Installed PC Booster-- First Restore Point -- 1: 2008-04-11 04:26:09 UTC - RP91 - Installed Assassin's CreedBacked up registry hives.Performed disk cleanup.System Drive C: has 6.58 GiB (less than 15%) free.-- HijackThis (run as hamir.exe) -----------------------------------------------Logfile of Trend Micro HijackThis v2.0.2Scan saved at 12:32:00 PM, on 4/12/2008Platform: Windows XP SP3, v.3264 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP3 (6.00.2900.3264)Boot mode: NormalRunning processes:C:\WINDOWS\Sy... Read more

A:Desktop Image + Taskbar Appears And Disappears After 10 Seconds

Hello hami. to BleepingComputer.comMy name is Billy O'Neal and I will be helping you. (Billy or Bill is fine)We apologize for the delay in response we get overwhelmed at times but we are trying our best to keep up.If you have since resolved the original problem you were having would appreciate you letting us know If not please perform the following below so I can have a look at the current condition of your machine.Thanks and again sorry for the delay.If you still would like help, please follow the following instructions: Please download Deckard's System Scanner (DSS) and save to your Desktop.alternate download siteDSS will do the following:Create a new System Restore point in Windows XP and Vista.Clean your Temporary Files, Downloaded Program Files, Internet Cache Files, and empty the Recycle Bin on all drives.Check some important areas of your system and produce a report for an analyst to review.Automatically run HijackThis. It will also install and place a shortcut to HijackThis on your desktop if you do not already have it installed. So if HijackThis is not installed and DSS prompts you to download it, please answer yes.You must be logged onto an account with administrator privileges when using.Close all applications and windows.Double-click on dss.exe to run it and follow the prompts.If your anti-virus or firewall complains, please allow this script to run as it is not
malicious.When the scan is complete, two text files will open in Notepad:main.txt <- this one will ... Read more

Read other 2 answers
RELEVANCY SCORE 50

Whenever I access a folder containing pictures, the thumbnails for them generate -- and I can actually see them. But this only lasts for a few seconds; the thumbnails get replaced by Vista's generic landscape icon. I'm not sure when this problem started -- at first, I was not bothered by it, since I wasn't working with my photos, so I didn't pay attention to it. But it has persisted for at least a month, in all folders with pictures in them. And I've made sure that the "Show thumbnails" options were set in both "Folder Options" and "Advanced System Settings". Maybe it was from me changing the registry a long time ago? I'm not sure.So, if someone knows a key I could check to turn on/off thumbnails, that would be useful.Or, if you have any other idea how this problem occurred, I'd be really grateful. Thank you!

Read other answers
RELEVANCY SCORE 48.8

Hi,
I have an IBM R30 notebook running Windows XP. I have attached a Diamond touch (Mitsubishi) keyboard. Every time I restart, it will not work. It appears in device manager with a ! on it. I have to uninstall it and reinstall it every time and it will work until I shutdown.
Any ideas?
Thanks,
Steve
 

A:USB Keyboard disappears on startup

Try installing it in SAFE MODE so that the device appears correct ( with no ! )

Then reboot computer in normal mode to see if that works out.
 

Read other 3 answers
RELEVANCY SCORE 48.8

After I start my computer the blu-ray/dvd drive disappears from "my computer." It has the latest drivers. The BIOS recognizes that the drive is connected and I can see it when I load the bios. Windows does not recognize it in device manager after it disappears. I've tried a lot of the fixes I've read but nothing seems to work and it's about to drive me crazy. Please help!

My specs are:
Windows 7 Professional 64-bit
AMD Phenom 9850 Quad-Core 2.51gHz
Zalman CNPS9000 CPU Fan/heatsink
8.0GB DDR2 RAM
ASUS m4a78-e motherboard
LG BH08LS20 Blu-Ray Burner - connected via SATA cable
1.0TB Western Digital Caviar Black HD (via SATA)
Maxtor 150GB HD (via IDE)
HT Omega Claro Plus+ 7.1 Sound Card
Samsung 23" HDScreen
Saitek Eclipse USB Keyboard
Microsoft Wireless Laser Mouse 6000 v2.0
Antec Nine Hundred Two Case.

A:Blu-Ray/DVD-Drive Disappears after Startup

Welcome to Seven Forums bigred82. It might be better if you listed the things you have tried, as we'll no doubt recommend them again. Such as removing the upper and lower filters. Switching the (SATA?) plug to another connector, etc.

A Guy

Read other 9 answers
RELEVANCY SCORE 48.4

Hello there!  I have a Radeon 6850 video card and I use the HDMI Audio as my sound output.  Sometimes however, it disappears on startup and I have to use the executable and reinstall it.  I don't know what causes this.  Anyone out here have an idea? Thanks!

A:Audio device disappears on startup.

Hi
 
The very first thing you need to do is to update your ATI driver. First go to control panel and uninstall ATI drivers completely. You can find the latest ATI driver from http://support.amd.com/us/gpudownload/Pages/index.aspx
 
 Report back if the problem still continues after updating drivers.

Read other 13 answers
RELEVANCY SCORE 48.4

Hi,

could you please help me out, i have WLM on my computer and for the last 2 weeks, i havent been able to open it, so now i am having to resort to windows messenger -_-.

What happens is, i open the program up, but there is a delay, then in the corner, the icon with the green and blue people pops up. but when i hover over the icon, it disappears, therefore not being able to log in. And when i go into processes, it is visible when i open the program, but when i hover over the icon, the process disappears. basically, i love going on live messenger, but i cant do anything because the icon disappears

i have tried uninstalling and reinstalling numerous times, but to no prevail.

NEED HELP!!

Many Thanks

Read other answers
RELEVANCY SCORE 48.4

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2600 @ 2.16GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 2038 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 95338 MB, Free - 60364 MB; G: Total - 953867 MB, Free - 853839 MB;
Motherboard: Dell Inc., 0TD761, , .40NDV91.CN129616473810.
Antivirus: Microsoft Security Essentials, Updated: Yes, On-Demand Scanner: Enabled

have been using Photoshop 7 for at least 3 years working perfect for my needs. Two weeks ago the program executes startup and instead of displaying its normal window, completely diappears without any trace, no error messages, nothing.... please HELP!
 

A:PS7 was working fine now after startup Disappears!!

Have you tried removing and reinstalling it ???

And Welcome to the TSG Forum
 

Read other 3 answers
RELEVANCY SCORE 48.4

Problem: The Wild Tangent Error Pop-up was solved on my desktop computer by using:

START ---- RUN---type in msconfig-----then going to START-UP and unchecking the Wild Tangent File...... But.....

Our Laptop has the same problem, which is an XP also.....we tried the above solution. The lap top has SPY Bot, and Ad Ware removal like my desktop computer, but now we have a new problem before we solve the Wild Tangent problem.

And that is.......When we go to click the Start-up Tab in the System Configuration Ultilty which brings us to all the files on Start-up, we do see all the files but, the page disappears after about 5 seconds, it acts like it is timing out.

This quick disappearing act does not give us a chance to find the file and unclick the Wild Tangent file to solve our problem.

How do we fix the Start-up so it will last more than 5 seconds?

Thanks for all your help!
 

A:Msconfig/Startup runs and then disappears

Read other 11 answers
RELEVANCY SCORE 48

Before I even get a chance to see what it says or refers to. Anyone ever heard of this and or what it could be an indication of?
 

A:Solved: Dialog box appears then disappears on startup

You don't give us a lot to go on SG. Do you see an outline of the box? Is it about 6"x4"? Do you run Zone Alarm?
ANY more info would be good.
 

Read other 3 answers
RELEVANCY SCORE 48

Hello,

I upgraded to Windows 10 several months ago and the Quick Access menu was working normally. A few months back however, all of the pinned items disappeared and I cannot pin anything to the quick access menu either. I've gone through all the posts and different solutions I can find and all I have been able to do is temporarily fix the problem by deleting the "5f7b5f1e01b83767.automaticDestinations-ms" file in the C:\Users\Rob\AppData\Roaming\Microsoft\Windows\Recent\AutomaticDestinations folder.

Deleting this file does bring back the quick access folders that I had pinned before this problem started to happen, but every time I restart my computer, the quick access menu is again empty and nothing can be pinned to it.

I have googled and tried all of the different solutions that I can find so any help with this issue would be greatly appreciated! Thanks in advance!

A:Windows 10 Quick Access Disappears on Startup

Hello and welcome

One thing worth checking - are the two boxes ticked in the Privacy settings of Folder Options? Select Options on the View ribbon of File Explorer.

Read other 0 answers
RELEVANCY SCORE 48

well its as simple as that, I recently got rid of the elitebar myself now I want to get rid of whatever this is well here my hijackthis logfile...

Logfile of HijackThis v1.99.1
Scan saved at 8:48:56 PM, on 5/5/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
D:\Documents\Various program\Hijack this mate\hijackthis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://ie.redirect.hp.com/svs/rdr?TY...ion&pf=desktop
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://ie.redirect.hp.com/svs/rdr?TY...ion&pf=desktop
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://ie.redirect.hp.com/svs/rdr?TY...ion&pf=desktop
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://ie.redirect.hp.com/svs/rdr?TY...ion&pf=desktop
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.google.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://ie.redirect.hp.com/svs/rdr?TY...ion&pf=desktop
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://ie.redirect.hp.com/svs/rdr?TY...ion&pf=desktop
R1 -... Read more

A:A windows pops up at startup on the taskbar then disappears

Greetings, and welcome to TSF.

Your log apprears clean, so we'll need to look a little deeper.

Let's use a program to scan for any trojans that may exist. Download TDS-3 http://tds.diamondcs.com.au/index.php?page=download. Learn how to use it at http://tds.diamondcs.com.au/index.php?page=easytouse. Make sure to update it after you installed it. You can get the manual updates at http://tds.diamondcs.com.au/index.php?page=update. When you launch the program, it will scan your memory for running processes. This will take less than 30 seconds. Next go to 'System Testing' on the menu and choose 'Full System Scan'. After that's finished, post the log file by selecting everything on the top pane (select from bottom to top). If any alarms are found, it will be listed in the bottom window. Please copy and paste that here also if it applies. If you have problems copying the text, look (or search) for a file named scandump.txt and see if that has the alarms - post that here.

If you have a fast internet connection (broadband), run an online virus scan at TrendMicro http://uk.trendmicro-europe.com/ente...all_launch.php. Just follow the instructions on the site to run the online scan. If any viruses/trojans are detected, try to delete or clean them in that site. You may use Panda ActiveScan also at http://www.pandasoftware.com/products/activescan. Otherwise, make sure your antivirus program has the latest definitions and run a full system scan.

Read other 8 answers
RELEVANCY SCORE 48

Every time I reboot, I have to relaunch the Quick Launch Toolbar. Although this is easy to do, is there a way to have it launch automatically? This problem started about 1 week ago. Thanks,
Norm

Read other answers
RELEVANCY SCORE 48

Hello!
 
Just recently i scanned my computer with Spybot Search and Destroy, and found a trojan "DC3_FEXEC", i removed and rebooted my computer, i opened the task manager and found a process named 'Test.exe' and he disappeared very quickly. I ran ADware cleaner, Combofix (probably a mistake), Malwarebytes, HitmanPro, and it didn't found anything. But everytime i reboot and open the task manager it's there, but it disappears so fast that i can't click on it.
 
This viruses are in my new Hard Drive that a friend gave me, i formatted both partitions except the one that said ''System Reserved''.
 
If anyone could help i would be very grateful. Sorry if it's confusing, english is not my native language.
 
Thanks in advance!
 
 
EDIT:
 
Hey, i solved (i hope), apparently it was something from spybot, i ran in safe mode and used the ''autoruns'' application and the description it said ''test.exe - Makes sure Spybot 2 is there on Windows 10.''
I deleted it and now it's gone. I tried removing the topic but i don't think i can. Sorry if i wasted anyone's time.

A:Test.exe process on startup and then disappears quickly

Hi there,Just to drop by a piece of advice - Spybot Search & Destroy is no longer recommended as its performance is very poor, and the TeaTimer function interferes with malware removal.Two better alternatives for anti-malware software are Emsisoft Anti-Malware and Malwarebytes Anti-Malware. Both have excellent track records and offer real time protection if upgraded to paid version, and can be used alongside existing antivirus software.

Read other 1 answers
RELEVANCY SCORE 47.2

Whenever I boot up my X395 Thinkpad, an icon briefly appears and disappears at the lower center of my screen. It's a side view of a face, with a finger held up to the lips. I'm pretty sure it's a Thinkpad icon and not a Windows or app icon.It doesn't seem to be related to audio settings or mic settings, since these have their own icons. It seems to be telling me that something is being muted, but I don't know what.Any help appreciated!.

Read other answers
RELEVANCY SCORE 46.8

Hi all. I am trying to fix my dad's computer that has a curious problem.When the computer boots up, the network fails to load, Norton's anti-virus fails to load, the windows gui is very very sluggish (many times locking up all together when any icons are double clicked), and the shutdown/reboot options are no longer displayed under the start menu. Additionally, ctrl+alt+del fails to open a task manager.When the computer is in this state it is almost completely unresponsive to any input.I have managed to get the computer operating normally by booting into safe mode and either choosing the "load last known good configuration" option or using the system restore. (I have used both these options because neither works consistently, often requiring multiple attempts to achieve a good boot). I have discovered no particular pattern, nor been able to identify any particular restore point that works or doesn't work.My current solution has been to simply not shut down or reboot the computer after I've succeed into getting it to work, however I would like to solve the underlying problem that is causes this.I have tried numerous things, including windows updates, reloading restore points, using Spybot S&D, updating and running a virus scan, all to no avail. I have yet to use HiJack this, so I went ahead and downloaded it and ran the scan, but I could use some help deciphering the results. (Note that I currently have the computer operating normally, but that wo... Read more

A:Shutdown button disappears and networks fails to load on startup

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 9 answers
RELEVANCY SCORE 44.8

I have HP laptop and my sreen disappears , when doing anything / what is causing this . I have run a scan and nothing comes up
 

A:screen disappears

What do you mean by dissappears and more specifically are you doing?
 

Read other 3 answers
RELEVANCY SCORE 44.8

https://support.hp.com/us-en/contact-hp/product/HP-ENVY-15-k000-Notebook-PC/6936206/model/7174348?sk... At the above http there are two phone #s given & I cannot get either to work. So how do I contact HP? Those #s are:  For issues powering up your computer or accessing your Windows desktop call1-877-852-0905.For all other issues call 1-888-698-3762 

Read other answers
RELEVANCY SCORE 44.4

The cursor for the mouse is not shown on the screen. But when i right and left click its function works. What do i do?its a wireless HP mouse for the desktop.

Read other answers
RELEVANCY SCORE 44.4

Hi, I am working on an Acer Aspire, Pentium D, Vista, 2GB ram. After about 45 minutes, the screen blanks out. Have to reboot to get it going again. I ran Malwarebytes, it found 19 errors. I thought this might have solved the problem, but no. I also then changed monitors, but the problem is still there. I cleaned out the case, the 2 motors were really clogged up, I thought it might be heat related. Then I ran a memory test and it stopped working again. It has 2 memory chips, I have removed one and am running the memory test again. Am I going in the right direction? Or is there any other ideas?
Thanks
Ned
 

Read other answers
RELEVANCY SCORE 44

Hi all,

I have a windows XP Pro SP2 installed on my Toshiba Satellite L 305-s5955.
Machine details : Intel Celeron, 2GB RAM, 160 GB HDD, 2MB L2 Cache.
My problem is that the welcome screen doesn't show up at startup and windows logs on automatically to Administrator instead of prompting for a user account selection. I checked out microsoft's tips but they were not any help.
http://support.microsoft.com/?kbid=305281
I have a password protected, private, Administrator account with a different name. (i.e. Both default administrator and new administrator account have password protection).

Switching of fast user switching or using the classic logon style didn't solve the problem. How can this be solved?

Thanks

Addisu
 

A:Solved: Windows XP Welcome Screen disappears

Read other 7 answers
RELEVANCY SCORE 44

Windows 98 Computer (Dell)

Outlook Express 6

Dial up modem internet connection.

Problem:

When shutting down Outlook express , the option screen to disconnect or stay connected disappears very quickly before you have a chance to click an option.

Dial up stays connected and has to be disconnected manually.(By right clicking icon on task bar and clicking disconnect) If you forget to do this dial up stays connected and ties up phone line.

Yes, I have the disconnect when no longer needed box checked.
I also have the disconnect if idle set to 10 mins.
But we need the option screen to stay up long enough to click an option.

Please help!
Thanks.
 

Read other answers
RELEVANCY SCORE 44

I have an Outlook Express problem that just recently started happening.

When I click 'reply to sender' on an E-Mail I want to reply to, my whole Outlook Express screen disappears and I have to restart Outlook Express. There's no error message or anything that might tell me what the problem is. As soon as I click on the Reply button, The Outlook Express screen immediately disappears.

Does anyone know what could be causing this.

BP
 

Read other answers
RELEVANCY SCORE 44

HI,
When I RUN, TLIST -s, TLIST -t, or NET START on the command line, the screen disappears before I can read it. This seems strange as I see the screen quickly flash by but cannot freeze it for viewing. However, when I type CMD, the screen appears and stays

Any Advice?

Many thanks
 

A:Command line screen disappears

The commands won't work from Start, Run. You need to open a cmd window first and then run them from there.
 

Read other 1 answers
RELEVANCY SCORE 44

While working on a webpage (after doing a google search), the screen suddenly disappears. I cannot go back and retrieve it but must start the entire search over.

A:screen suddenly disappears on hp pavilion

Hello @nclilly, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue with the screen going blank, and wanted to assist you! To start, can you provide me with the Product Number of the notebook?  Here is a link you can use that will help you find your Model and Product Number:HP Customer Support - Products In the meantime, it sounds like you may be having issues with the display drivers.  Try reviewing the following document, and let me know how it goes: HP PCs - Error: Display Driver Stopped Responding and Has Recovered (Windows 10, 8, 7) Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great weekend!

Read other 1 answers
RELEVANCY SCORE 43.6

my selected desktop wallpaper appears while windows xp loading and finally default desktop wallpaper comes in.
I am using kaspersky antivirus software and regularly scanning the machine almost daily.
 

Read other answers
RELEVANCY SCORE 43.6

Hey there, new here and need some help. Here's what happened:

I opened internet explorer and typed in a google search and hit enter and it popped up a new instance of iexplorer instead of just searching in the current window as usual. Then, links I clicked on opened new windows which is not the usual setting. When I clicked in the middle of text on a web page it would highlight everything. Strange little things like that.

So, I clicked start > Turn Off > Restart and nothing happened; it just went back to the desktop. Pushed the Windows key and it wouldn't open the start menu. Finally I had to do a hard shut-off.

I waited a minute and booted the computer back up when it stopped at the login/password screen as usual. I typed the password and hit the Enter key and it just deleted the password and stayed on the page. So, I retyped it and clicked with the mouse on the green arrow button with the same result. Laptop built in mouse button did the same thing. Eventually it just froze entirely and I could not even type in the password box. Also, the little help icon on this screen would not bring anything up; it's like all the keys got remapped to different functions.

The only recent updates were the automatic Windows updates upon shutdown earlier today and the comp worked fine after booting up after that the first time.

Any thoughts?

I'm on a Dell laptop with XP Home.

Thanks


EDIT: I hard shut down the comp again and let it sit for about 15 min. Booted... Read more

Read other answers
RELEVANCY SCORE 43.6

The computer is a Pentium D, 3.0Ghz, 1Gig Ram, 250Gig HDD, Windows Media Center, Video - Radeon X1300, 512Mb

I have been experiencing OE randomly crashing when I click on Create a new Message. What in fact happens is that OE disappears from the screen but remains running in the background. I can see msimn.exe in Task Manager / Processes. The only way around this is to restart the machine.

The machine and memory tested as having no errors at the retailer that it
was purchased from.

I have just done a chkdsk and there were no errors found.

I have tried the following to relieve it:

 Update Windows Media Center
 Deleted the identities and recreated them importing the mail and
address books
 Uninstalled IE7 and reinstalled IE6
o Deleted the identities and recreated them importing the mail and
address books
 Update the computer?s BIOS
 Reformat the HDD and reinstall Media Center
o Reinstall all programs
o Update
? Create the identities and import the mail and address books
? Delete the identities and recreate them without importing the old mail and address books

In spite of all of this, it still randomly crashes when creating a new message

I am hopeful that someone can tell me what?s wrong

Thanks in advance

Read other answers
RELEVANCY SCORE 43.6

I recently upgraded to Windows 10 from Windows 7. Since the upgrade I have noticed the following:

When my computer comes alive from screen saver mode, sometimes though not always all the icons are missing. The task bar is there but clicking on any item there does nothing. It's like everything just seizes up.

Any solutions please. It is frustrating.

Ta Oakey

A:Mouse disappears off screen and icons missing

Sounds like you have a virtual desktop that got added somehow. Click on the taskbar icon that looks like the square with two ears (next to Cortana in my screen shot. See if you have more than one desktops and close the extra one.

Read other 0 answers
RELEVANCY SCORE 43.6

Hello, I have a Dell laptop 15R 2nd Gen i-5 processor running Windows 7 Home 64bit.

The problem I am having is this: Mouse disappears on right side of screen. The entire right side of screen (not just in the lower corner). If I move the mouse 6 inches to the right off screen, then I would have to move it 6 inches to the left again until it re-appears. If I moved the pointer 1 foot to the right, I would have to move it 1 foot to the left until the pointer re-appeared again.

It's as if the pointer kept going on to a hidden screen??

A:Mouse Pointer disappears RIGHT side of screen

Looks like a mismatch between physical resolution and the larger virtual desktop resolution. Should that be the case, a few users prefer the larger space to work with and can navigate and bring into view the unseen parts as needed.

Read other 2 answers
RELEVANCY SCORE 43.6

Hi
 
Help appreciated with the following:
 
A black box appears then disappears then reappears then disappears.....not sure what it could be..I am worried it may be a virus of some sort.
 
Can someone please assist bearing in mind that I am not a whizz with computers
 
Many thans in advance!

A:Black box appears and disappears on my screen..is it a virus..please help..

Does this happen when you first turn the machine on? Or just at random times?

Read other 3 answers
RELEVANCY SCORE 43.6

Hi all:I hope that this is the right board for this problem, even though it may not be primarily a "Touch" issue.  My problem is that I keep losing my pointer/cursor on my HP laptop. Here are my specs and details of the problem based on a set of questions that I found on another thread: What make / model computer? HP Pavilion 15-n216us What operating system? Windows 10 64bit upgraded from Win 8. Does the mouse left alone disappear or are you clicking on something and then it just disappears? It only (and always) happens when I touch the screen. The cursor disappears instantaneously when I touch the screen. It happens whether I have a USB mouse plugged in or not. How do you normally resolve the issue? Except for restarting the laptop, the only way that I can get the cursor back is to go to Personalize/Themes/Mouse Pointer settings. I then have to close the Mouse Pointer settings windows (clicking OK) while shaking the mouse. How is your mouse connected to your computer? Wireless but as stated above, it also happens when the mouse is not plugged in. One screen or two screens? If one, have you ever used two? One screen, never two. More information:1) The cursor is not set to disappear when typing.2) I read that this could be a problem with the Touchpad, so I downloaded the Synaptics Pointing Device driver for my laptop from the HP website. When I attempted to install it, I got a message that I already have a newer driver than the... Read more

Read other answers
RELEVANCY SCORE 43.6

My Yoga 720-15IKB is just out of its warranty and I have noticed that when i click or type in the search bar (bottom left corner), the bar turns black as if it just disappears. As a result, I cannot search for applications. Sometimes i will begin to type and the results will appear for a split second before the entire box disappears.I am unsure if this issue could be related to another issue where my screen blacks out and displays random pixelations before it "runs into an issue" then reboots my computer. This has happened several times over the past few weeks and seems to be happening increasingly often.Drivers up to date, system is updated, ran a diagnostics test and no issues appeared. What is wrong and what do I do to fix this?

Read other answers
RELEVANCY SCORE 42.8

ThinkPad X1 Carbon 6th GenPurchased March 2019 from CostcoBIOS N23ET63W 1.38Windows 10 Home 64 Bit 1903 (problem occurred before 1903 update)All drivers and firmware are up to date using Lenovo VantageSee CrystalDiskInfo below for full SSD details.I've added a Western Digital (SanDisk) 512GB in the open PCIe slot. I'm using this only to store photos, music, etc and no system data or applications. While using my X1, I'll get random BSoD's. The error messages have varied, but all seem to relate to the kernel or OS not being able to read/write to the disk. This has happened at least a half dozen times now and averages probably once every two to five hours of use. It's gotten to the point where I can pretty much predict I'm about to get a BSoD a minute or two before it happens. Apps stop responding, web pages refuse to load, then ultimately even the mouse cursor stops responding. The BSoD appears and shows 0% gathering info. It never progresses. Eventually, Windows reboots the laptop. However, Windows won't load. When I load the Lenovo BIOS diagnostics utility, it doesn't even show the main SSD! The WD drive does still show. Turning the laptop off then on fixes this issue every time and then Windows boots normally. CHKDSK (including full offline scan), SMART, everything I can think of comes back normal. System runs flawless until it doesn't. Anyone have any suggestions or experienced a similar issue before I deal with Lenovo? My next step is going to be removi... Read more

Read other answers
RELEVANCY SCORE 42.8

After using the touch screen few times and trying to use touchpad for small button clicks, mouse cursor just disappeared and can't find it. But when I exit web browser, I see mouse curson back on backscreen. When I open browser again, it disappears. Only way I can get back my mouse cursor back is restarting the laptop.

Read other answers
RELEVANCY SCORE 42.8

I have a problem with the screen of my Satellite U840T

Mouse disappears right of the screen and bottom in black bars at the top and while the left mouse can not go to the bars.

In the display settings everything is good I think.

Thank you for yours help

A:Satellite U840T - Mouse disappears right of the screen and bottom

Hi

I?m confused.
Your issue isn?t described very well.

What do you mean exactly by: ?Mouse disappears right of the screen and bottom in black bars at the top??
Do you mean the touchpad or cursor?
The notebook?s touchpad supports the Gesture control feature (Multi Touch) and this feature could be configured in touchpad settings:
+Control panel -> mouse -> Device settings tab -> Settings+

There you can find also the option called ?Edge swipes? which opens the Charms bar, app Switcher, and Application bar just by moving finger from the edge of the touchpad in towards the center.

In such case the cursor would not be visible.

Read other 1 answers
RELEVANCY SCORE 42.8

Lately my pointer is disappearing after i login from sleep or locked computer.

I had this problem in the past but it got solved after i restored my PC, now it came back to haunt me.
I am guessing some updates disrupted with the mouse cursor (not an expert opinion).

I've tried many things but the issue seems to be persistent.

Here are some things I've tried with no results:

Changing the pointer options (hide while you type, pointer trails, ctrl to highlight) and combinations of them.

I tried using different pointers (Black, White, Black small, etc)

Also tried using troubleshooting the software changes, sfc /scannow, clean registry with ccleaner, rebooting (many times).

It seems to be a problem with no concrete solution.

The only solution that I found is (Clt-Alt-Del) it changes the screen and the pointer appears again, if I lock the computer it is gone once more.

If somebody can help i would appreciate it.

thanks

A:Mouse Cursor Disappears after unlock screen Windows 8.1

anybody?

Read other 3 answers
RELEVANCY SCORE 42.8

I hope someone can help. W10 (64 bit Home) has been working OK on this laptop but recently I have been able to open the settings screen for only a micro-second. Having found people having the same problem I have tried running SFC several times, as suggested, but it says it found an issue it could not resolve.

Again following instructions on the forum I tried running DISM with an iso loaded and this hung at 40% for hours (overnight). I could not find a solution to this, but someone posted their CBS log and was given a solution to the original problem.

I do not understand what to look for in the log file, but there are several lines that mention an error. I attach the log file (zipped as it was too big for the forum), and if anyone can help I would be grateful.

Thanks
Peter

A:Settings screen only flashes up then disappears - SFC and DISM issues

Please open an admin command prompt and run the following command (copy/paste this command)

Code:
findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt"
On your desktop a file called sfcdetails.txt will be created, please upload this file.

Read other 0 answers
RELEVANCY SCORE 42.4

In the last few weeks I have noticed my laptop sound works on a normal (not restart) boot, but then it disappears. I have to restart the laptop and then it's fine. The next day I boot up from cold, same problem. To clarify, on a normal boot I hear the Windows 7 startup noise, however, shortly after if I play a media file there is no sound. If I restart the laptop, everything is okay. I did install some updates through System Update which I'm guessing caused it. However, I have uninstalled them all now but the problem still exists. I have uninstalled my sound driver and let Windows reinstall it several times- no fix. Does anyone know what this exact issue is? UPDATE: Just realised when I ran System Update it did update some firmware. I wonder if that's what caused it (obviously I couldn't roll that back)

Read other answers
RELEVANCY SCORE 42.4

Whenever I boot up my VAIO (VGN-SZ750N) laptop an all-blue screen appears only momentarily, so that there's no time to read any of what is clearly a very wordy warning in white typescript that fills the whole screen. How can I stop this long enough to read it and take whatever action it recommends?

then, something happens that may be related to this . . .

soon afterward, a boxed message appears saying: "System has recovered from a serious error . . . " Clicking on this results in a huge number of figures that would challenge anybody who attempted to write them down.
 

A:How to read warning that appears and disappears too fast to read on startup

Read other 6 answers