Over 1 million tech questions and answers.

Random BSOD problems in the past 2 days. Random errors at random times

Q: Random BSOD problems in the past 2 days. Random errors at random times

Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty of air flow. I installed a Cool Mater Hyper Plus 212 heatsink. I followed the instructions, and looked at a few installation videos on my phone just to be sure. I'm pretty positive everything was done correctly including the thermal paste as my system has not gone over 45C while gaming even playing games on Ultra settings.

I got one BSOD late last night, after about 6 hours of it being on but no other problems after that. Today however I have been having BSOD issues the entire time at random times from just 5 minutes up to 2 and a half hours between BSODs. They have ranged from: NTSF_FILE_SYSTEM, PAGE_FAULT_IN_NONPAGED_AREA, KMODE_EXCEPTION_NOT_HANDLED, and SYSTEM_SERVICE_EXCEPTION

I have researched the errors on google all day and tried fixes for each one such as running memory diagnostic tool, deleting the old page info from memory and creating a new one, deleted all of my video drivers and reinstalled them, and I've even opened my case to make sure all my memory and cards are plugged in all the way.

These are the errors that BlueScreenView gave me:

120313-25490-01.dmp 12/3/2013 11:01:36 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff87f`f903edfb 00000000`00000008 fffff87f`f903edfb 00000000`00000005 fltmgr.sys fltmgr.sys+4aae x64 ntoskrnl.exe+75bc0 C:\Windows\Minidump\120313-25490-01.dmp 4 15 7601 276,256 12/3/2013 11:03:15 AM

120313-14601-01.dmp 12/3/2013 3:20:13 PM SYSTEM_SERVICE_EXCEPTION 0x0000003b 00000000`c0000005 fffff880`13dc50b0 fffff880`0a3f4800 00000000`00000000 dxgmms1.sys dxgmms1.sys+100b0 x64 ntoskrnl.exe+75bc0 C:\Windows\Minidump\120313-14601-01.dmp 4 15 7601 276,256 12/3/2013 3:21:31 PM

120313-22557-01.dmp 12/3/2013 4:04:04 PM KMODE_EXCEPTION_NOT_HANDLED 0x0000001e 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+75b90 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.18247 (win7sp1_gdr.130828-1532) x64 ntoskrnl.exe+75b90 C:\Windows\Minidump\120313-22557-01.dmp 4 15 7601 276,256 12/3/2013 4:05:37 PM

120313-24679-01.dmp 12/3/2013 9:36:13 PM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff7ff`fb110030 00000000`00000000 fffff800`031d2ef1 00000000`00000002 ntoskrnl.exe ntoskrnl.exe+75bc0 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.18247 (win7sp1_gdr.130828-1532) x64 ntoskrnl.exe+75bc0 C:\Windows\Minidump\120313-24679-01.dmp 4 15 7601 276,200 12/3/2013 9:37:49 PM

120313-22760-01.dmp 12/3/2013 9:41:25 PM NTFS_FILE_SYSTEM 0x00000024 00000000`001904fb fffff880`0319f758 fffff880`0319efb0 fffff800`02e6df96 Ntfs.sys Ntfs.sys+4688 x64 ntoskrnl.exe+75bc0 C:\Windows\Minidump\120313-22760-01.dmp 4 15 7601 276,200 12/3/2013 9:42:54 PM



I have also created a compressed file using the SF tool this forum suggested and will be attaching it to this post. Any help would be appreciated as i am now completely stumped on how to fix the problem.

RELEVANCY SCORE 200
Preferred Solution: Random BSOD problems in the past 2 days. Random errors at random times

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Random BSOD problems in the past 2 days. Random errors at random times

Welcome to the Forum.

Please remove the software:

Code:
Start Menu\Programs\Advanced SystemCare 7 Public:Start Menu\Programs\Advanced SystemCare 7 Public
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer



Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\McAfee Online Backup Public:Start Menu\Programs\McAfee Online Backup Public
McAfee is a known cause to BSOD's. Please remove it and use Microsoft Security Essentials it is recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - Free
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run Disk Check on your Hard Drive(s): Disk Check

Post screenshot(s) of your Hard Drive(s) using Crystal Disk Info Software:
CrystalDiskInfo - Software - Crystal Dew World
Screenshots and Files - Upload and Post in Seven Forums

Run a Hard Drive test: SeaTools for DOS and Windows - How to Use

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Check for heating issues using Speccy or HWmonitor:
HWMonitor
Speccy

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff87ff903edfb, 8, fffff87ff903edfb, 5}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+43801 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff87ff903edfb, memory referenced.
Arg2: 0000000000000008, value 0 = read operation, 1 = write operation.
Arg3: fffff87ff903edfb, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030fd100
GetUlongFromAddress: unable to read from fffff800030fd1c0
fffff87ff903edfb Nonpaged pool

FAULTING_IP:
+0
fffff87f`f903edfb ?? ???

MM_INTERNAL_CODE: 5

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: LiveUpdate.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff88006047400 -- (.trap 0xfffff88006047400)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa800b719990 rbx=0000000000000000 rcx=fffffa800ce83481
rdx=fffffa800b719991 rsi=0000000000000000 rdi=0000000000000000
rip=fffff87ff903edfb rsp=fffff88006047590 rbp=fffff880060475e0
r8=fffffa800b719990 r9=ffffffffffffffff r10=fffff880010596c0
r11=fffffa800ce83480 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng zr na po nc
fffff87f`f903edfb ?? ???
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002f425b3 to fffff80002ec5bc0

FAILED_INSTRUCTION_ADDRESS:
+0
fffff87f`f903edfb ?? ???

STACK_TEXT:
fffff880`06047298 fffff800`02f425b3 : 00000000`00000050 fffff87f`f903edfb 00000000`00000008 fffff880`06047400 : nt!KeBugCheckEx
fffff880`060472a0 fffff800`02ec3cee : 00000000`00000008 fffff87f`f903edfb fffffa80`08475500 fffffa80`078361a0 : nt! ?? ::FNODOBFM::`string'+0x43801
fffff880`06047400 fffff87f`f903edfb : fffffa80`078361a0 fffffa80`08475700 fffffa80`0829abb0 fffffa80`0829add0 : nt!KiPageFault+0x16e
fffff880`06047590 fffffa80`078361a0 : fffffa80`08475700 fffffa80`0829abb0 fffffa80`0829add0 fffffa80`0c3e4cb8 : 0xfffff87f`f903edfb
fffff880`06047598 fffffa80`08475700 : fffffa80`0829abb0 fffffa80`0829add0 fffffa80`0c3e4cb8 fffffa80`0c3e48d0 : 0xfffffa80`078361a0
fffff880`060475a0 fffffa80`0829abb0 : fffffa80`0829add0 fffffa80`0c3e4cb8 fffffa80`0c3e48d0 fffffa80`0c4f6e80 : 0xfffffa80`08475700
fffff880`060475a8 fffffa80`0829add0 : fffffa80`0c3e4cb8 fffffa80`0c3e48d0 fffffa80`0c4f6e80 fffffa80`0797c8f0 : 0xfffffa80`0829abb0
fffff880`060475b0 fffffa80`0c3e4cb8 : fffffa80`0c3e48d0 fffffa80`0c4f6e80 fffffa80`0797c8f0 fffffa80`09136010 : 0xfffffa80`0829add0
fffff880`060475b8 fffffa80`0c3e48d0 : fffffa80`0c4f6e80 fffffa80`0797c8f0 fffffa80`09136010 00000000`00000000 : 0xfffffa80`0c3e4cb8
fffff880`060475c0 fffffa80`0c4f6e80 : fffffa80`0797c8f0 fffffa80`09136010 00000000`00000000 fffff880`06040001 : 0xfffffa80`0c3e48d0
fffff880`060475c8 fffffa80`0797c8f0 : fffffa80`09136010 00000000`00000000 fffff880`06040001 fffff880`010409aa : 0xfffffa80`0c4f6e80
fffff880`060475d0 fffffa80`09136010 : 00000000`00000000 fffff880`06040001 fffff880`010409aa 00000000`00000000 : 0xfffffa80`0797c8f0
fffff880`060475d8 00000000`00000000 : fffff880`06040001 fffff880`010409aa 00000000`00000000 fffffa80`0c3e4cb8 : 0xfffffa80`09136010


STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+43801
fffff800`02f425b3 cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+43801

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 521ea035

FAILURE_BUCKET_ID: X64_0x50_BAD_IP_nt!_??_::FNODOBFM::_string_+43801

BUCKET_ID: X64_0x50_BAD_IP_nt!_??_::FNODOBFM::_string_+43801

Followup: MachineOwner
---------
If this does not provide stability. Test RAM.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.




Information
Errors are sometimes found after 8 passes.



Tip
Do this test overnight, before going to bed.

Read other 9 answers
RELEVANCY SCORE 149.6

Hello,

This is a newish computer (Built in July 2009) and up until a few days ago I haven't had any issues with it. For whatever reason though, while I was playing the Starcraft 2 beta, it crashed to BSOD and had to restart. The event viewer was largely unhelpful in figuring out the problem, so I went ahead and ran a few utilities to make sure my computer is running as well as I think it could be (CCleaner, Spybot, etc., just to get rid of junk). All seemed fine until last night when I went to shut down my computer and it blue screened again, with once again an unhelpful event file entry.

I only have the minidump from last night's crash (when I shut down my system), as when I ran the utilities to clean up my comp the minidump from the first crash was deleted. Hopefully someone can help me out with this... Your time is much appreciated.

My potentially relevant system information:
Motherboard: ASUS Crosshair III Formula AM3 AMD 790FX ATX AMD Motherboard
CPU: AMD Phenom II X4 945 Deneb 3.0GHz
RAM: mushkin 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) // 7-7-6-18, 1T @ 1.85v
Power Supply: CORSAIR CMPSU-750TX 750W
Hard Drive: Western Digital Caviar Black WD6401AALS 640GB w/ 32MB cache
Graphics Card: EVGA 896-P3-1170-AR GeForce GTX 275
Sound Card: Auzentech X-Fi Forte

Here is the WhoCrashed log for last night's 'Computer Shutdown' BSOD:

Code:
On Wed 5/12/2010 3:31:46 AM your computer crashed
This was likely caused by the following module: ntoskrnl.exe
Bu... Read more

A:BSOD over past few days at random times

This is the second Starcraft2 issue I've seen today - I wonder if there's an issue with the beta? I'd check their forums to see if it's the problem.

BUT there is a driver on your system that's known to cause BSOD's - so I'd suggest that you replace the ASACPI.SYS driver (dated from 2005) with the most recent one available for your system from the Asus website ( ASUSTeK Computer Inc.-Support- download_item_mkt ). It'll be listed under the Utilities section and is known as the "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit" .

The memory dump points to a memory corruption as the issue - so I'd try this free memory test just to rule that out: Memory Diagnostics (read the details at the link).

More info on the STOP 0x7E error here: BSOD Index (Please note the "Usual causes" listed at the top of that section).

Beyond that, I'd wait and see if there were further BSOD's. If so, post the memory dump files and we'll move on from there.

Summary of the BSOD:

Code:
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed May 12 23:30:41.009 2010 (GMT-4)
System Uptime: 1 days 12:41:50.336
BugCheck 1000007E, {ffffffffc0000005, fffff80002aed38d, fffff880031c40e8, fffff880031c3950}
Probably caused by : memory_corruption ( nt!MiGetNextNode+31 )
PROCESS_NAME: explorer.exe
BUGCHECK_STR: 0x7E

Read other 4 answers
RELEVANCY SCORE 149.6

I've been getting these at random times, it'll do it no matter what programs I'm running. I use chrome, firefox, and SR ware iron for browsers. trillian for messaging. sometimes have open excel. and always have my sticky note up. i don't have a firewall or antivirus installed, as i'm pretty confident in my ability to not get viruses (i've had this system almost a year with no problems) but i do run housecall every couple months to be sure. i also ran a malware detector yesterday and it came up clear.
i did a system restore to the 14th, when i had installed the new java upgrade (java 7, update 17) and didn't solve the problem. i did a system restore to the 7th (automatic restore point) and didn't get the BSOD for about 12 hours so i thought it was fixed. now it's back.
at one point yesterday, i couldn't even boot windows without the BSOD - would just give me a continuous loop of "loading" "bsod" and options to start normally or run startup repair (which didn't help)
i used the SF diagnostic tool and attached the zip as instructed.

thanks for any help you can give!

A:several BSOD in past two days at random times

After looking at your mini, its a hardware issue.

Have you overclocked your cpu?

Have you installed any new hardware?

Have you tried running memtest?

How hot does your CPU get?

It sounds like a failing hard drive, what kind of HDD do you own.

Read other 5 answers
RELEVANCY SCORE 148

So I started playing TF2 again recently, so I've been using my brother's Xornet mouse. However, since I started using it, it would occasionally just stop working. Also, I've been getting BSOD screens that say "BUGCODE_USB_DRIVER" (I didn't have enough time to write down all the other information on that screen, but I changed the settings so it doesn't automatically restart, so I should have them if it happens again). The BSODs seem to happen at completely random times, except for one thing: they are always preceded by random "USB unplug noises" (i.e. the "da-dun" sound that you hear when you unplug a USB device). These noises can start happening up to 30 minutes before the BSOD, and they seem to happen at random times anywhere from 2 seconds to 3 minutes apart.

I followed some advice from another forum that said to uninstall your USB drivers, reboot, and allow windows to reinstall them. I did, and everything seemed to be going fine for awhile, but after using my mouse for a couple of minutes, it started happening again, and I got the BSOD. I don't know if the mouse is the cause or just coincidence.

This seems to happen whether or not I have USB devices plugged in. Dump file attached.

A:BSOD at random times for past 2 days, BUGCODE_USB_DRIVER

Oh snap: As soon as I posted this, windows popped up these windows (see attached pic). I currently have no devices plugged in to any USB ports.

I have no idea what any of this means.

Read other 4 answers
RELEVANCY SCORE 138.8

Has been happening on and off for the last couple of months, strangely enough the problem went away once after we had a power surge but has now returned, Usually get at least 1 a day at a random time ( Maybe a game, maybe on youtube, maybe just right clicking a folder )

Took a photo of it last time and got this error code,

*** STOP: 0x0000001e (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)

After a bit of searching this forum i found i should also post a dump log from C:\Windows\Minidump ... When trying this i keep getting an access is denied message but i have admin privileges ?

Should also add that i have read about faulty drivers/ software and ran software to "fix" the problems yet i still get the BSOD.

Will try and get the dump log on for my next reply but any ideas straight off the bat ? Seems to be quite a common problem.

Anthony

A:BSOD, Random times on Random days

Welcome aboard, Chovies.

Post it, following the Blue Screen of Death (BSOD) Posting Instructions so that we can get adequate information to help you.

Read other 5 answers
RELEVANCY SCORE 135.2

Hello , im having random BSOD issues and after a BSOD i can use my PC again but the problem is it keeps happening randomly and i will be able to use again
Here are some of the errors i have got:
PAGE FAULT IN NON PAGED AREA
BAD or CORRUPTED POOL
MEMORY MANAGMENT
I have the files Windows_NT6_BSOD_jcgriff2 and perfmon files included in this post
System specs
Os: Windows 7 home premium 64 bit
I have bought this about a week ago , i had it built.
Proccesor : AMD FX 6100 Proccesor
gpu :nvidia gtx 560
ram: 8gb
hard drive : 1tb

A:Random BSOD errors happening at random times

Hello, welcome to SevenForums!

I have taken a look at your provided dump files. There are tons of memory management and memory corruption errors. Before we continue, if any of your hardware is overclocked, PLEASE reset your clocks to stock for diagnostic purposes.

First off, before we continue onto memory.... in your drivers list I noticed you have sptd.sys listed, which is the driver for Daemon Tools. Please uninstall Daemon Tools from your system as it's known to cause many issues in the Windows 7 environment. Once you've done so, restart and then run DuplexSecure's sptd uninstaller to fully remove sptd.sys from your system. After you've done so, restart again.

Next, tons and tons of memory management and memory corruption errors as I've said earlier. Please read the following thread to download and install Memtest to test your memory for any bad sticks.

Read other 9 answers
RELEVANCY SCORE 132.4

It's been over three months and I am still struggling with multiple BSOD.

I wish I were more able to fix this but, I am not.

If anyone will review to possibly help with this I appreciate it more than you know.

Spent over 2400$ on a new system and it's not gone long without BSOD or often just locking up requiring a restart.

New file created for diagnostics and uploaded.

A:BSOD random times, with random errors.

Pwnsesh mate don't quite fully understand what you mean by updating your driver?? There are a few in a system so which one ??

Also what are you doing with the BIOS?? It is something best left well alone unless you know what you are doing. Before you do anything I would back up the registry and any data you need.

Registry - Backup and Restore

Imaging with free Macrium

Read other 3 answers
RELEVANCY SCORE 129.2

Hello Sevenforums,
lately wife's rig has been suffering from random BSODs, we can be having a 2 hours session of cod and when she is on desktop it crashes, or it would happen mid game.. it's just random.

Also When i get those BSODs PC goes into a cold boot loop, it's like when i press the power button CPU fan spins then stops then spins then stops


I loaded the dump files and below are her rig's specs.

CPU: intel i5 4430
Mobo:Asrock H78 pro 4
GPU: Sapphire 7870 XT
Ram: G.Skill Aries 8GB
Cooling: Corsair H80
OS: Windows 7 ultimate
PSU: Corsair 650TX


I would be so glad for the help i would get here.. sorry for having this as a first post. but it's so annoying when women are grumpy.. my life has been sad in the past 4 days

A:Random BSODs in the past 4 days.. Clueless Lots of errors . 1e, 4e, 7e

Little update. Ran memtest overnight .. 8 runs no errors. now i am doubting psu or OS.

Read other 1 answers
RELEVANCY SCORE 126.4

For the past few days I been experiencing BOSD playing games and one time just watching youtube video. I did memtest86 the results were fine. This morning I did the driver verifier and got a BOSD right at windows logo screen. I attach the minidump files dated back from 11/27/16 to today. Any help will be appreciated. If u need more info let me know. Thank you

Read other answers
RELEVANCY SCORE 126

Hi

I'm currently running Windows XP Home Edition with Service Pack 3.

Currently using firefox 3.5.5. On random occasions ,random pages will randomly not load with the loading circle spinning but nothing happening. When I click refresh, the page might load or might not. Sometimes i have to end up closing the browser and that seems to fix the problem for some time. The problem will randomly occur again shortly after.

For Msn, i have version Windows live Messenger 2009. On random occasions, i will not receive or my messages will not be sent out. The problem will go away and come back consistently.

I have shaw high speed internet directly connected to the modem. I tried calling them and letting them take a look into my computer through the internet. When they were searching theought, the problem did not occur at that moment, therefor i couldn't not prove that i have a problem.

I tried scanning my computer with Avira AntiVir Personal- Free version and Malwarebytes' Anit-Malware Free version all uptodate, but nothing gets picked up.

This problem started to occur 2-3 weeks ago, and i could not occur what i did during that time.

Thanks for your time.

A:Unable to access random pages and random times/Msn not receiving or sending msges at random times

o.o

Read other 1 answers
RELEVANCY SCORE 124.8

This is a 2 year old machine that has been running well. I can't think of anything major that is new other than installing Office 2013 about 2 weeks ago. Typically BSOD occurs when I'm away from the machine rather than during specific activity. Not seeing other error messages and no performance issues.

Help is truly appreciated.

Thank you

A:BSOD random daily past 4 days

Hi dockramer.

This is a network related issue.

Code:
BugCheck 139, {3, ffffd000208ba440, ffffd000208ba398, 0}

Probably caused by : NETIO.SYS ( NETIO!NsiGetParameterEx+21c )

Followup: MachineOwner
---------
I cannot see any driver is available for your Marvel Yukon network adapter in Motherboards - P6X58D Premium - ASUS

Attachment 336369

In this situation I would prefer to use windows 7 with that board.

But if you think to continue with 8.1, better you post in BSOD Crashes and Debugging - Windows 8 Forums .... the regular 8.1 users might have a better idea.

Read other 3 answers
RELEVANCY SCORE 124.8

I've had no issues with my desktop from the time it was built until the last couple of days. Now I'm getting random BSOD pretty regularly. So far this is what I've done to try to resolve the problem, but nothing's worked out.
Updated video card driver
Ran Windows Memory Checker on Start Up
Ran Windows Error Checking on Hard Drive

The BSOD's are usually DRIVER_IRQL_LESS_NOT_EQUAL, SYSTEM_SERVICE_EXCEPTION, ataport.sys.

The PERFORM.html and BSOD Dump & File Collection data is attached.

This is my work computer so I've lost a couple of days just trying to get this thing running again. Any help is appreciated. Thanks!

Built April 2010
Windows 7 Professional - 64bit - OEM
Intel i5 - 750
ATI Radeon HD5670
8GB RAM (4 x 2GB)
WD Caviar Black 500 GB

A:Random BSOD in the past couple of days - Please Help!

Can anybody be of any help with my BSOD's? I need to get my computer up and running safely asap

Read other 7 answers
RELEVANCY SCORE 123.6

Hey SevenForums.

I've had my system just comming upto 12 months now and this is the first time ive experienced a BSOD. Since the 18th January ive had 2 BSOD's a day. The first time I noticed it I was playing music with WMP, then a couple where from browsing the internet with Firefox, and the most recent one was when I was copying some files to a CD with Nero.

Not sure what has caused the problem either. The only recent thing I can think of is when I plugged in a 3.5mm jack into my Soundcard for Line-Input, thats about it.

Included is the .zip recomended by the sticky, below is a minidump i get when Windows recovers.






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 3081

Additional information about the problem:
BCCode: c5
BCP1: 0000000000000008
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80003BFA617
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1


EDIT:
15 minutes after posting, another BSOD, the error report seems a lot different. I was using WMP at the time.





Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 3081

Additional information about the problem:
BCCode: 50
BCP1: FFFFFFFFFFFFFBB0
BCP2: 0000000000000000
BCP3: FFFFF80003AB519C
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
P... Read more

A:Random BSOD over the last 2 days. Everything fine for the past year.

Code:

Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\Selections\Windows_NT6_BSOD_jcgriff2\011912-47829-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03a1f000 PsLoadedModuleList = 0xfffff800`03c64670
Debug session time: Thu Jan 19 06:11:04.463 2012 (UTC - 7:00)
System Uptime: 1 days 1:46:47.446
Loading Kernel Symbols
...............................................................
................................................................
....................................................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {18, 2, 1, fffff8800ff2f71a}

Unable to load ima... Read more

Read other 5 answers
RELEVANCY SCORE 122.4

i've been having a BSOD problem for days now. the pc would work either for a few hours and crash or 20 minutes. i could be browsing the net or be watching a movie. don't know if it's the heat and the cooler is dying on me, or the processor, memory, or a windows update problem, graphic card or drivers.

please help.

A:BSOD for days now, at random times and different actions

Hey there!
Code:
BugCheck 116, {fffffa800569f4e0, fffff8800fdef2bc, ffffffffc000009a, 4}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+99b2bc )
The problem is caused by your graphics driver. Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again and you should be good to go! This is the guide for DDU: Display Driver Uninstaller: How to use

Read other 9 answers
RELEVANCY SCORE 120.4

Hi, I have started getting BSODs twice a day at random moments on my computer in the last 4 days. I've tried to figure out the reason for the BSODs but I'm not sure.

I often get the * Hardware failure * bsod. Now I know these can be caused by a number of things, so that is why I included with this post the SF Diagnostic Tool zip attachement so you can help me figure this out.

I consider my knowledge of computers (overclocking, hardware maintenance and debugging) at a decent level, so it shouldn't take much help before we fix this. I just need someone to point me in the right direction.

A:BSOD at random times, 2 times/day in the last 4 days

Hi jonathan

1. The attached system logs are only till 1 July 2012... appreciate if you can save the log directly from event viewer and post it here.

2. Holy crap!!.... I know you have a decent enough system with 8 GB Ram....but this is insane...... Please disable the all that crap from startup


Code:
V0710Mon.exe REG_SZ C:\Windows\V0710Mon.exe
Adobe ARM REG_SZ "C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exe"
AMD AVT REG_SZ Cmd.exe /c start "AMD Accelerated Video Transcoding device initialization" /min "C:\Program Files (x86)\AMD AVT\bin\kdbsync.exe" aml
avast REG_SZ "C:\Program Files\AVAST Software\Avast\avastUI.exe" /nogui
BDRegion REG_SZ C:\Program Files (x86)\Cyberlink\Shared Files\brs.exe
ChallengerPro REG_SZ "C:\Program Files (x86)\Thermaltake Challenger Pro\Ttsystray.exe"
CLMLServer REG_SZ "D:\Programmes Jo\CYBERLINK\Power2Go\CLMLSvc.exe"
HP Software Update REG_SZ C:\Program Files (x86)\Hp\HP Software Update\HPWuSchd2.exe
PDVD8LanguageShortcut REG_SZ "D:\Programmes Jo\CYBERLINK\PowerDVD8\Language\Language.exe"
PMBVolumeWatcher REG_SZ D:\Programmes Jo\Sony\PMB\PMBVolumeWatcher.exe
QuickTime Task REG_SZ "D:\Programmes Jo\Quicktime\QTTask.exe" -atboottime
RemoteControl8 REG_SZ "D:\Programmes Jo\CYBERLINK\PowerDVD8\PDVD8Serv.exe"
Rocket... Read more

Read other 9 answers
RELEVANCY SCORE 120

Hello,
I'm having random Windows-7 Ultimate - x64 crashes.
System was recently installed, some updates as well, so should have low number of registry or drivers "garbage".

I just started to search the reason, so far checked minidump with BlueScreenViewer:
020212-20529-01.dmp 02/02/2012 12:35:50 UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`80050033 00000000`000406f8 fffff800`02c40ea4 ntoskrnl.exe ntoskrnl.exe+705c0 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16841 (win7_gdr.110622-1503) x64 ntoskrnl.exe+705c0 C:\Windows\Minidump\020212-20529-01.dmp 2 15 7600 291.000
012512-22386-01.dmp 25/01/2012 12:11:12 DRIVER_VERIFIER_DETECTED_VIOLATION 0x000000c4 00000000`00000091 00000000`00000002 fffff800`02e45c40 00000000`00000000 vsdatant.sys vsdatant.sys+10a8c x64 ntoskrnl.exe+705c0 C:\Windows\Minidump\012512-22386-01.dmp 2 15 7600 291.000
012412-23649-01.dmp 24/01/2012 10:07:52 UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`80050033 00000000`000406f8 fffff800`02c3bea4 ntoskrnl.exe ntoskrnl.exe+705c0 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16841 (win7_gdr.110622-1503) x64 ntoskrnl.exe+705c0 C:\Windows\Minidump\01... Read more

A:random BSOD crashes - 5 times in past 3 weeks

From your post, Driver Verifier blamed vsdatant.sys - a component of ZoneAlarm. Please do this:
- Uninstall ZoneAlarm
- use the free tool from this link to remove the remnants of ZoneAlarm: Antivirus Uninstallers (scroll down to the direct download link for ZoneAlarm)
- enable your Windows Firewall
- monitor for further BSOD's.

Running the memory dumps now, will post back with the results.....

Read other 2 answers
RELEVANCY SCORE 118.4

I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into windows in 8-10 seconds (SSD) but the latest post-BSOD boot took about five minutes from typing my password into the login screen to where my desktop popped up. A subsequent reboot was at normal speed. The memory dumps always include the NT OS kernel, but then also some other driver (different each time), which I suspect just happens to be the one trying to run at the time of the error.

Things I've tested:
Temperatures (didn't really suspect them in the first place, but I'm running cool)
Memory (Both the native Windows test and memtest found no issues)
Hard drives (chkdsk came back clean)

All drivers are up to date, although the uploaded report might show an older version of my sound card driver, as I just reinstalled it at the behest of windows action center (which didn't make the notification go away, mind).

I'm hoping someone wiser than I can make sense of this, because it all seems so random to me. Thanks in advance to whoever that is.

A:BSOD at seemingly random times, memory dump blaming random drivers

How many passes did you take memtest for?

Code:
Debug session time: Mon Apr 14 14:39:57.702 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 3:33:21.985
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
BugCheck 1A, {41790, fffffa800b8e2ca0, ffff, 0}
BugCheck Info: MEMORY_MANAGEMENT (1a)
Bugcheck code 0000001A
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa800b8e2ca0
Arg3: 000000000000ffff
Arg4: 0000000000000000
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: AvastSvc.exe
FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+35084
BiosVersion = 2201
BiosReleaseDate = 11/22/2013
SystemManufacturer = To be filled by O.E.M.
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Thu Apr 10 10:21:01.348 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 8:53:05.394
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+27e08 )
BugCheck 1A, {31, fffffa800f46b160, fff... Read more

Read other 1 answers
RELEVANCY SCORE 118.4

I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are:

Driver IRQL not less or Equal
System Service Exception

and these two I just got before I decided to post:
Interrupt Exception Not Handled
No More IRP Stack Locations

I recently took this desktop back from my brother. I bought a new harddrive and installed a fresh Windows 7 x64 Home Prem. on it. I have two other HDD's connected too, a 1TB and a 500gb. I built this originally (and I had no problems when I built it) back in 09. System Specs are included. I replaced the RAM too. I know it isn't on the Approved List for my mobo, but nothing on the mobo lists 8GB and I'd like to use 8GB.

My parts are:

Asus P5P43TD Mobo
Core 2 Duo 8400 Wolfdale
(2x4gb GSKILL F3-12800CL9D-8GBRL)
XFX Radeon HD4890 (but i hadn't noticed, but radeon now only sets out drivers for the entire series, 4XXX, etc.)
Sunbeam (Ithink) 780w psu

I'm not in the market to buy a new performance pc (although the parts I have my eye on are roughly 1400)

Please lmk what you think I should do.

A:BSOD doing random things (Google Chrome, minecraft, random times)

I see some memory corruption in the dumps. Can you follow this tutorial: RAM - Test with Memtest86+

Report back after the tests

Thanks Ant

Read other 3 answers
RELEVANCY SCORE 116.8

My PC keeps crashing and i have no idea why.

A:BSOD at random times caused by random drivers

Dont use a BETA display driver.

Uninstall the installed display driver using DDU. Then install the CCC 14.4 WHQL only.

Also Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know for any further BSOD after doing these two.
_______________________________________

Code:
fffff880`0786c6d8 fffff880`03ed7eccUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x4fecc

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff880110ec200, fffff88004053258, fffff88004052ab0}

Probably caused by : atikmdag.sys ( atikmdag+10200 )

Followup: MachineOwner
---------

Read other 9 answers
RELEVANCY SCORE 116.8

Hello,
after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I removed all Realtek drivers again and installed the latest i could find on the Realtek site and it seemed to run smoothly. Then i downloaded all the other drivers like the AMD Graphics and Soundblaster Z driver and installed them. The BSOD's came/come completely random. Today i've been able to play three Dota 2 matches without any problems, then 15 minutes later again. I also have to say this system ran like this for half a year without almost any problems or BSOD's. It somehow became slow and i tried stuff, broke it and now it seems still broken, although i formatted the drive and reinstalled Windows.

I've tried to debug the minidumps myself but it says something different evertime (I'll add the dmp files at the end, although there has not always been one created after a BSOD). I've tried reinstalling all the drivers and no help. I've put all stuff from AMD/ATI into the exception of Avira Antivirus, because i've read there might be interferences.

I ran MEMTEST86+ for like 3 hours - no errors. I have ran disk scans - nothing.

The BSOD is different every time. The time i get it is completely random. The only common i could recognize is that STOP: 0x0000001E (0x0000000000000, 0x000000... Read more

A:Random BSOD's at random times often error 0x0000001E

Please follow Blue Screen of Death (BSOD) Posting Instructions and upload the results with your next post.


Code:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: avguard.exe
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
That is your Avira Anti virus


Code:
*** WARNING: Unable to verify timestamp for avnetflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avnetflt.sys
avnetflt+0x7000
fffff880`069f29d8 fffff880`069f2c88
fffff880`069f29e0 fffff880`069f2c00
fffff880`069f29e8 fffffa80`120aa388
fffff880`069f29f0 fffffa80`1209ba10
fffff880`069f29f8 00000000`00000001
fffff880`069f2a00 fffffa80`120aa350
fffff880`069f2a08 fffff880`02636511 avnetflt+0x4511
Avira again. Uninstall Avira with the Avira Removal Tool Avira AntiVir Removal Tool - Download


Code:
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiKernelCalloutExceptionHandler+e
fffff800`02a7d5be 90 nop
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!KiKernelCalloutExceptionHandler+e
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION: 6.1.7601.18409
MODULE_NAME: hardware
FAILURE_BUCKET_ID: X64_IP_MISALIGNED

Code:
lmvm atikmdag
start end module name
fffff880`11088000 fffff880`11f98000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmd... Read more

Read other 9 answers
RELEVANCY SCORE 116.8

Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran

A:Daily BSOD random times random Apps

  
Quote: Originally Posted by bskaggs


Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran


Hi bskaggs,

Welcome to Seven forums.

Here are you bugcheck details:






Quote:
YMBOL_NAME: dxgmms1!VidSchDdiNotifyInterruptWorker+b

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: dxgmms1

IMAGE_NAME: dxgmms1.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 5164dc13

FAILURE_BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b

BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b


Update your video driver from here and not from the Windows Update:

Drivers & Downloads | Dell US

Also, perform a clean startup to ensure no conflicts with the background programs:

Troubleshoot Application Conflicts by Performing a Clean Startup

Keep us posted with the results so we can advise you further.

Read other 1 answers
RELEVANCY SCORE 116.8

Happens almost daily. Some days I can be using the computer heavily for 12 hours without an issue. Other days it'll crash within 10 minutes. After replacing hardware, mobo, gpu, and hdd, still having the issue, only I'm actually getting a BSOD now. Prior to this I wasn't even getting a BSOD, just a freeze with the sound skipping a bunch and a frozen desktop. Only way to fix it was to force a shutdown.

sfc /scannow shows no issues. ChkDsk is fine. I'm just about to use Driver Verifier. Other than that I don't know where to go from here.

SPARKYDESKTOP-Sat_08_29_2015_150539_55.zip

Memory.DMP says it's possibly from memory_corruption. I've run memtest for 24 hours with no issues. Here's the analysis from WinDbg:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800937c8e80, Address of the instruction which caused the bugcheck
Arg3: ffffd001b0ef3fa0, Address of the context record for the exception that caused the bugcheck
Arg4: 00000000000000... Read more

A:BSOD - Random times with random activity levels

Hi sparkybear,

Welcome to the 8forums.

Please update CPU-Z

Code:
4: kd> lmvm cpuz137_x64start end module name
fffff801`f061c000 fffff801`f0625000 cpuz137_x64 T (no symbols)
Loaded symbol image file: cpuz137_x64.sys
Image path: \??\C:\Users\RYANRI~1\AppData\Local\Temp\cpuz137\cpuz137_x64.sys
Image name: cpuz137_x64.sys
Timestamp: Mon Feb 17 15:22:16 2014 (53021B18)
CheckSum: 000145F6
ImageSize: 00009000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPD pass through remover.
Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window


Diagnostics

MEMTEST86+

Please Run Memtest86+

   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, e... Read more

Read other 2 answers
RELEVANCY SCORE 116.8

Hi All,

First time poster and hope somebody can help.

Have been getting BSOD for a few days now. All at random times, while using the internet, watching movies or just playing music.

Have even formatted but of no use.

Most recent BSOD was MEMORY MANAGEMENT but its different all the time.

A:Random BSOD messages, happens at random times while using computer

Welcome.

Could you configure the system to collect small memory dumps.Dump Files - Configure Windows to Create on BSOD

Read other 1 answers
RELEVANCY SCORE 116.8

Hey everyone, Im new here on this forum.

I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly.

What happenes is that everything becomes unresponsive; cant alt+tab, cant ctrl+alt+del etc etc. everything freezes randomly... then boom, BSOD. its happened twice, with no apparent pattern.

And then, when it restarts, it tries booting but then it goes into the boot selection screen and my SSD is nowhere to be found. I have to power off then power on again for it to boot up and log in.
- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2012-02-26T23:15:40.693210900Z

EventRecordID 6298

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Jason-PC

- Security

[ UserID] S-1-5-18


+ EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0

I've attached my BSOD info along with my Heath report.

if anyone could help please let me know.

Windows 7 Home Premium 64x
System hardware age: from 3 years to a few months.
OS age: just recentl... Read more

A:Random BSOD during Random times, error 0x8000000000000002

No DMPS in upload

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 8 answers
RELEVANCY SCORE 116.4

Hey Seven Forums!

I have had this laptop for more than half a year, I bought it second hand because it was really cheap but now I'm getting random Blue Screens of Deaths. I first thought that it could be a driver so I updated them all but to no help, I made a clean install of Windows 7 but still to no help. It all started six days ago, I was playing grand Theft Auto 4, it memory dumped and restarted and since then I've gotten regular Blue Screens of Death. When watching Dexter on Netflix, playing games or just plain out relaxing to music... I do not have all the dumps because I formatted my hard drive.

I am not one hundred percent sure if I have provided enough information in this post because frankly I am a bit of a nut when it comes to making good informative posts on any kind of forum...

~Jamie

A:BSOD random times, several errors

Hi CardboardCat.

It appears to be a hardware issue, which is tough to debug on a 4 years old computer.

But first of all, update the display driver from Download Drivers .... opt for the "Automatically Detect and Install" option there.

Next, do some hardware tests.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Also, search for any possible BIOS update for HP Pavilion dv7 Notebook PC.

Code:
BiosVersion = F.13
BiosReleaseDate = 01/25/2010
A backdated BIOS may also be interpreted as a hardware issue.

Let us know the results.
_______________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 9 answers
RELEVANCY SCORE 116.4

So I got myself a new computer not long ago, and I had some issues with the windows install that gave me 5-6 bsod a day atleast. Managed to fix that issue eventually, but lately it started to pop up with the same thing again, everything from MEMORY_MANAGEMENT to KERNEL_ERROR.
Latest one was DL/DI.DLL

It can happen during playing games, watching videos on youtube, or even idle.

A:Random BSOD errors several times a day.

Please uninstall Gigabyte Easy Tune (ifinstalled) and Easy Saver. Older versions are known to cause BSOD's on someWindows systems (and your Easy Saver dates from 2009).
Of your 13 dumpfiles 11 are related to memory corruption..


Code:
Use !analyze -v to get detailed debugging information.
BugCheck 109, {a3a00f58c37c9567, b3b71bdf15fb6bc2, fffff800f1c31c38, 1}
Probably caused by : memory_corruption
Followup: memory_corruption
---------
5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See Kernel patch protection for x64-based operating systems
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
... Read more

Read other 5 answers
RELEVANCY SCORE 115.2

I run into a BSOD when i'm actively utilizing the system about every 2 hours. I often leave the PC on and when I come back in I can see the BSOD lighting my back wall. It isn't fun and doesn't allow me to use teamviewer to have access to my PC while away.

I usually game on the system, so that could be why it typically occurs while gaming. The past two happened while I was watching youtube video and doing basic word processing.

I had 4 crashes yesterday, 2 0x00000024 NTFS-FILE_SYSTEM, I ran a sfc and chkdsk, minor issues with json.
Then had a 0x000000c2 BAD_POOL_HEADER and a SYSTEM_SERVICE_EXCEPTION 0x0000003b.

I was running into a fairly constant 1a and 24 MEMORY_MANAGEMENT issue, but I reseated the RAM ran a MemTest86 (1 pass on each) and updated my SSD driver and it seemed to go away.

The one thing that seems common is crash address ntoskrnl.exe+75bc0

Any help would be much appreciated.

A:BSOD Random times and occurence, errors 24, 19, 1a, 3b, 0a, 7e, 24, c2

Hello and welcome Bruce mate from what I know of dump files there seems to be a suggestion the system files are in disarray or corrupt Bug Check 0x24: NTFS_FILE_SYSTEM (Windows Debuggers)

Now if you can get into safe mode run these for starters


http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option 2 ifnecessary

Read other 1 answers
RELEVANCY SCORE 115.2

I recently built a new PC (I?ve built 3-4 machines from scratch so I feel I know what I?m doing).
These are the parts that are being used in this new machine.

Motherboard - Gigabyte F2A55M-HD2
CPU - AMD A8-6600K Richland 3.9GHZ APU Socket FM2 Quad Core 4MB 100W Black Edition
RAM - Patriot Signature 2X4GB PC3-12800 DDR3-1600 1.5V Dual Memory Kit
HD - Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps (I split into 2 partitions 400/600)
PSU - Rosewill HIVE Series HIVE-650 650W
LG DVD-RW (this is the only old hardware? 3-4ish years)

Put everything together, installed windows, installed programs needed, did all the windows updates (oh god so many updates!).

The machine didn?t crash and worked fine for the first week then all of a sudden, I was getting BSOD when doing random things and they would show different error codes.

I tried to let it crash a few times before getting all the dump files together.

After the crashes the machine works fine, has no problem booting up and overall it seems to be working fine (minus the crashing of course).

Before asking on here I thought I would check a few things
- Ran chkdisk and received no errors on the HD
- Ran memtest and received 0 errors
- System Temp is ~31C and CPU temp ~50C
- I double checked all connections inside the case and everything seems to be tight, and fitting correctly.

I've attached the zip file from the DM Log Collector

Thanks for the help

A:BSOD with random/different errors several times a day on new machine

Hello robosd, Welcome to Sevenforums!

It looks like almost all of your dumps are pointing to memory corruption

How long did you run memtest for? It needs to be ran for at least 8 passes or when you find any errors whatsoever. With most of them pointing towards memory, any other dump is likely to be misleading and/or wrong. If you don't get any errors in 8 passes, let it run longer.

Read other 9 answers
RELEVANCY SCORE 114.4

I have a random BSOD issue. I thought I had fixed it but still having issues.






Quote:
windows version: Windows 7 , 6.1, build: 7600
Hardware: ASUSTeK Computer INC., M2N-SLI
CPU: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ AMD586
RAM: 4GB total


I recently installed Windows 7 home premium edition to a new hard drive. I was having issues with a small older drive, so I went with fresh install thinking it would fix my issues.

nope. New drive and new windows install and I still get BSOD at random times, and its not the same errors.



So I got a program to read what was causing crashes, Info below. ( not too good at forum formatting ether...) I also did the log dump program recommended on forums. its been attached.

Help? I have no clue as to why or what is going on anymore...I have read on these forums and googled my issue/error codes so much, with no solid fix. Its beyond frustrating.











Quote:
On Wed 10/21/2015 11:37:43 PM GMT your computer crashed
This was probably caused by the following module: amdk8.sys (amdk8+0x1BB6)
Bugcheck code: 0xA (0x51, 0xFF, 0x1, 0xFFFFFFFF82E04BF2)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\amdk8.sys
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: Processor Device Driver
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at ... Read more

A:BSOD (random ones at random times) Windows 7

Had a look through your dumps and all of them blame a various core windows driver for the crash, as this cannot truly be the cause then some further testing will be required
Initially I would run an sfc scan to check for any corruption within windows itself SFC /SCANNOW Command - System File Checker
Next I would run memtest to perform a thorough test of the RAM, preferably overnight for a minimum of 8 passes SFC /SCANNOW Command - System File Checker

I notice you have no windows updates installed, it would be good to get this done as missing SP1 means you are a long way behind

Depending on the outcome of these will determine what else needs to be done but as the problem has transcended to a new HDD & OS then more hardware testing is likely

Read other 1 answers
RELEVANCY SCORE 114.4

DCP Watchdog, Memory Management, Kernel Security Failure and several others at random times - especially during large file transfers between drives. I did a memory test and it stated there was an issue but I removed the culprit and the random BSOD continues.

Thanks for your help

A:BSOD at Random Times for Random Reasons

Have you rerun the memory test? If so, did it pass?
Have you run other hardware diagnostics? Here's a link to the one's I suggest (and they're free): Hardware Diagnostics Start with the hard drive tests as this involves "large file transfers between drives"

You have 3 or 4 hard drives. What is the make/model/wattage and age of your Power Supply?

Lot's of Windows Updates failures in the WER section of the MSINFO32 report. If the problems continue, please post over in the Windows Updates & Activation - Windows 8 Forums for further expert assistance with this issue.

Out of 5 memory dumps there were 4 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- dirt/dust/hair/fur/crud inside the case. Blow out the case/vents with canned air (DO NOT use an air compressor or vacuum as they can cause damage to the system)
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or H... Read more

Read other 1 answers
RELEVANCY SCORE 114.4

Hi,

I use my computer mostly for office work and have never experienced BSOD until about a month ago when I updated my drivers. One of the drivers I updated was the audio driver that immediately began causing problems including BSOD. I rolled back the driver update and reinstalled the driver which seemed to resolve the issue for a while but then after a week the BSOD began again and I have been unable to isolate the cause since then. I have continued to update firefox, antivirus, windows and other security software I have always used and these softwares never seemed to cause any problems before.

There are specific times when the BSOD occurs, mostly it is when I start the computer and during the first few minutes after windows loads or when I resume the computer from hibernate/sleep mode.

I have included the dump files and attached a screenshot.

Any help you can provide would be great.

Thank you

A:BSOD at random times while doing random activities

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Richard\AppData\Local\Temp\Temp1_SF_17-02-2014.zip\SF_17-02-2014\021414-19593-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.x86fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0x8361a000 PsLoadedModuleList = 0x837634d0
Debug session time: Fri Feb 14 02:20:03.737 2014 (UTC - 5:00)
System Uptime: 0 days 0:03:02.814
Loading Kernel Symbols
...............................................................
................................................................
................................................................
..
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck D1, {440070, 2, 0, 8ca7ba1e}
Unable to load image \SystemRoot\system32\DRIVERS\TeeDriver.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for TeeDriver.sys
*** ERROR: Module load completed but s... Read more

Read other 8 answers
RELEVANCY SCORE 114.4

My system has been extremely unstable since the last Windows updates about a week ago. Kaspersky Internet Security stops and restarts. Firefox, Outlook, World of Warcraft,etc crashing frequently. BSOD several times a day. I come to my desk and the logon screen is often there indicating the system crashed and rebooted while I was out.

This is very atypical for my system. I often go weeks without rebooting or having any program crash. I have noticed two error messages in the BSOD. One was memory management and the other was bad pool header. I suspect there have been others, but I'm not present every time Windows crashes.

Win7 Pro 64bit retail original OS on this system. I built this system about 6 months ago and it's been running very well until a week or so ago. Suggestions gratefully accepted.

A:BSOD at random times doing random things

One of the memory dumps in the WER section of MSINFO32 blames Kaspersky (as do 2 of the 9 memory dumps). Please do the following:





Quote:
Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall the antivirus software from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of the antivirus software using one of these free tools: Antivirus Uninstallers
- IMMEDIATELY install and update the free antivirus
- check to see if this fixes the BSOD's
NOTE: NEVER run more than 1 anti-virus, firewall, Internet Security/Security Center application at the same time.


Older versions of Acronis are known to cause BSOD's on Win7 systems also. Your copy has drivers that date from 2007. As such you MUST uninstall it.

In the table below is a list of drivers. Please update or remove the programs associated with any drivers dated from 2009 or earlier. Below the table is a list of links to more information about the drivers (it'll help you find out what programs belong to the drivers in question).

If all of that doesn't fix it, then please run Driver Verifier according to these instructions: Driver Verifier Settings

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (... Read more

Read other 4 answers
RELEVANCY SCORE 114.4

Hi everyone,
I have a problem with my computer. I've had only had 2 bluescreens so far, but I'm rather concerned. The first bluescreen was when I just pulled the charger from my computer. The second time was right after I plugged in my charger. I have a new battery.

I have attached all the bsod files below. Thanks in advance.

System specs:
Windows 7 Home Premium 64 bit
Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz
LENOVO 4173C19
4 GB total, 3.88 usable
HDD: HITACHI HTS723232A7A364
Sound card: Conexant 20672 SmartAudio HD
Graphics card: NVIDIA NVS 4200M

A:BSOD at random times while doing random things

MSINFO32:

Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter.
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

Code:

Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\YUSSIKAT\Downloads\BSOD\060815-88421-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18839.amd64fre.win7sp1_gdr.150427-0707
Machine Name:
Kernel base = 0xfffff800`03014000 PsLoadedModuleList = 0xfffff800`0325b730
Debug session time: Tue Jun 9 06:58:03.636 2015 (UTC + 6:00)
System Uptime: 3 days 1:50:56.466
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track dow... Read more

Read other 6 answers
RELEVANCY SCORE 114.4

Hi,
I am getting BSODs at random times, while doing different things each time. Been getting them for 5 days trying to narrow down what could be causing it. Searching lead me here. I did the posting instructions. Also did sfc/scannow 2 times that was suggested on another post. After the scannow both times it told me there were corrupt files that it couldnt fix. Any help moving on from here would be great.

Thank you.

EVAN-Thu_03_24_2016_212710_16.zip
CBS.zip

Read other answers
RELEVANCY SCORE 114

Hey all. I have been getting BSODs everyday for a couple months now. At first, since the BSODs started at around the same time as I received my new motherboard and cpu (MSI PC Mate Z97 + Intel i5-4690K), I thought the BSODs were caused by this new hardware, but I am not certain as I updated drivers around the time too. At the moment the BSODs could be caused by anything.
I have:
 
 
Ran memtest overnight with a successful pass.
 
 

Changed power settings to high.
 
 

Installed latest intel chipset drivers from intel's auto updater.
 
 

Installed latest BIOS.
 
 

Installed as many additional drivers from my motherboard's webpage.
 
 

Uninstalled graphics drivers (for my AMD HD 7870 GHz edition) and reinstalled.
 
 

Completely reinstalled windows by formatting by HDD and installing a fresh copy of windows on to that.
 
 

My PC specs are as follows:
 
 
MSI PC Mate Z97
 
 

Intel Core i5-4690K
 
 

AMD Radeon HD 7870 Ghz Edition
 
 

16gb (4x4) of Patriot Viper 3 DDR3
 
 

Seagate Barracuda 1TB 3.5" 7200RPM
 
Antec TP-650C

 
I could not attach the additional required file due to the task never completing in the application.
Thanks in advance!
 
 
Here are thew last 5 .dmp files if you need them:
https://drive.google.com/folderview?id=0BzgSuwGhlWk4NUcwZW1id1Vlc1U&usp=sharing
 
In .zip file:
https://drive.google.co... Read more

Read other answers
RELEVANCY SCORE 114

Hey all. I have been getting BSODs everyday for a couple months now. At first, since the BSODs started at around the same time as I received my new motherboard and cpu (MSI PC Mate Z97 + Intel i5-4690K), I thought the BSODs were caused by this new hardware, but I am not certain as I updated drivers around the time too. At the moment the BSODs could be caused by anything.
I have:Ran memtest overnight with a successful pass.
Changed power settings to high.
Installed latest intel chipset drivers from intel's auto updater.
Installed latest BIOS.
Installed as many additional drivers from my motherboard's webpage.
Uninstalled graphics drivers (for my AMD HD 7870 GHz edition) and reinstalled.
Completely reinstalled windows by formatting by HDD and installing a fresh copy of windows on to that.

My PC specs are as follows:MSI PC Mate Z97
Intel Core i5-4690K
AMD Radeon HD 7870 Ghz Edition
16gb (4x4) of Patriot Viper 3 DDR3
Seagate Barracuda 1TB 3.5" 7200RPM
Antec TP-650C

Here are thew last 5 .dmp files but as mentioned earlier the errors seem to always be different:
https://drive.google.com/folderview?...1U&usp=sharing

In .zip file:
https://drive.google.com/open?id=0Bz...DNKazI5a0R1UlE

Thanks in advance!

A:BSOD at random times 2-3 times per day with different errors

BSOD Posting Instructions & How to upload files

Read other 4 answers
RELEVANCY SCORE 114

Hello!

Im new on this forum and i hope i do this the right way.

Ever since i built my computer, (about a year ago) i have gotten at least one bluescreen per week or more.
I have never really cared about it until now. Now, my computer tends to crash and then it gets stuck on the
"bios bootup screen". If i then restart my computer it all goes back to normal but the computer crashes again after 2-5 minutes in windows.

I would love if someone could help me solve this problem.

/William

A:BSOD at random times, idle or in-game (many different errors)

It is a stop 0x116, which is a display related BSOD.

Apply the latest version of nVidia display driver.
You may download it directly, from our forum link Latest NVIDIA ForceWare Video Drivers Windows 7; or you may opt for the Option 2 of Drivers- Download NVIDIA Drivers for ?Automatically find drivers for my NVIDIA products? (it requires java installed).

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Let us know the results.
_______________________________________________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa800c121010, fffff88008b696c4, ffffffffc000009a, 4}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9316c4 )

Followup: MachineOwner
---------

7: kd... Read more

Read other 1 answers
RELEVANCY SCORE 114

I have just bought this computer and have constantly had multiple BSOD occurrences a short while after first use. This computer is brand new, Custom Built. While it was at Cyberpower HQ it underwent Quality control to test the hardware's compatibility with each other which it passed. I have tried to fix these BSOD's by myself but to no avail so I decided to ask the forums . Here is some basic info on my Computer.

Windows 7 is...
64-bit
The originally installed OS (no other OS has been installed)
Full Retail version.
Hardware is brand new.
Installed OS about a month ago (When the computer was received).

If any more info is needed please ask.

I've also attached the requested zip file in accordance with the BSOD Posting Instructions.

UPDATE: I recently reinstalled my entire OS, updated all of the possible windows updates, installed all of the drivers I have in order to attempt to fix this issue. At first I had thought that It had worked, because when I first started it up it was running pretty smoothly. However, I have had 4 different blue screens within the past 2 days. I have a new system report and now I finally have DMP files. (Yay!) So I have attached them in this post.

A:BSOD at random times. Different types of Errors but mainly 0x0000007E

No DMPs included in upload

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 9 answers
RELEVANCY SCORE 114

Dear forumers,

I would like to enlist your kind assistance in arresting my BSOD issue.
I have gotten this problem since I have bought my system back in 2011 but due to my problem I have stashed it away for 3 years. Now I have dusted my desktop off and started using it again, the BSOD is hampering my work.

What I have done:
1) Clean install of Windows 7 Ultimate x64
2) Updated my motherboard BIOS
3) Updated my Windows 7 to Service Pack 1 with all the latest updates including Defender updates.
4) Downloaded the latest drivers for all of my peripherals.
5) Ran MemTest86+ overnight with 18 total passes without errors.

So I would like to know if you could be kind to point out how to solve this BSOD once and for all. Attached is the zip file as per the SevenForum guide's instructions.

All help is welcome and appreciated!

A:Random BSOD times, errors: 0x0000001a and 0x0000004e

Code:
Product ID: 00426-OEM-8992662-00006 ==> HP OEM
Original Install Date: 03-Feb-15, 2:27:26 PM
System Boot Time: 28-Mar-15, 12:44:38 PM
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: H67MA-USB3-B3 ==> Gigabyte retail motherboard
HP OEM licensing on Gigabyte retail motherboard is only possible when the installation is counterfeit. And a counterfeit installation is subject to all sort of issues.

Get genuine windows, have a trouble free computer.

Read other 9 answers
RELEVANCY SCORE 113.2

Hello everyone,

I'm stuck with a very frustrating BSOD problem and from the look of it, it seems like some kind of harware failure. Thing is, I've replaced almost everything but the BSODs refuse to go.

The BSODs are completely random but playing a current generation game (Arkham Asylum, GRID) would guarantee a crash within an hour. Mass Effect, though, runs for many hours at a stretch sometimes...
Analyzing my dumps told me that the crashes were totally random. Page faults, the irq_not_less_than_equal one, the driver_irq_not_less_than_equal one, and the bugcheck codes were pretty random too! Even the faulting processes were anything from ntoskrnl to npfs to my ati driver... just about anything!

I like fixing my own problems, plus I'm impatient. My temperatures were within limits, so I assumed it was the RAM and got myself 2 new corsair 2GB chips just to be sure.
But the BSODs continued...

So it's not the RAM; the motherboard, Graphic card, and the PSU are brand new anyway. The only thing left was the processor, but they almost never go bad... or so I thought.

The real clue was when one of the dumps was found to be corrupt by the debugger! Reading up on that told me that it could be a processor issue. So I borrowed a Xeon 3040 from a friend to test.

Well guess what... The BSODs have almost gone. At least I can work in peace now though the Xeon is painfully slow. I say 'almost' because I DID get one BSOD since I put the Xeon abo... Read more

A:Random BSODs with random errors/bugchecks in random processes

Your dumps came up with errors 0x8E / 0xD1 / 0xA etc. each dump citing different / random process being responsible for instance in question.

Such errors do and can occur due to mismatch RAM timings or incorrect voltage settings. I'll advise you to check specs of your (i.e. timings + voltage) and see whether settings in BIOS are correctly matching these.

Secondly, sometimes even the settings are matching you may still need to fiddle around with voltage settings (incrementally) and see whether that stabilize the system.

Lastly, do stress test your graphic card with OCCT, because one of the dumps came up with 0xc5 as 1st argument, which usually happen due to acceleration issues of graphics. Regards
 

Read other 4 answers
RELEVANCY SCORE 112.8

Well, here's the system specs to start off...

OS: Windows 7 professional x64 new OS
Motherboard: Gigabyte Z68X-UD3H-B3 rev. 1.3
CPU: Intel Core i5-2500K x4 Clocked at 5801 MHz
RAM: 16gb Corsair Vengeance 1600MHz
Harddisk: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G
VGA: NVIDIA GeForce GTX 560 Ti
PSU: Corsair Enthusiast Series TX650 V2 650W 80+ Bronze
Cooling: Corsair Air Series A50 Performance CPU Cooler
Network: Realtek PCIe GBE Family Controller
Audio: Realtek High Definition Audio
DirectX 11

Hopefully that's enough.
Anyway I built this computer about 3 weeks ago and immediately had BSOD problems and graphics error kernel problems and whatnot. The graphics one I haven't seen in a little while now so hopefully I took care of that. Now I get random shut offs and blue screens. This is the newest error message: The driver detected a controller error on \Device\Harddisk1\DR2. So what I'm wondering is do I have the harddisk in the right Sata port? I thought I did according to the diagram, currently it's in SATA3_0/1 which is supposed to support Intel 6gb/s connectors...but maybe I should have it in the 3gb/s ones? Any help or ideas would be appreciated.
P.S. I've also ran memtest 86+ and there weren't any errors from that. Next I'm going to remove 3 of the mem sticks and run a test individually on each of those. Temps look great- under 30C for everything and I have ran a stress test for an hour and they stayed around 60C...Is it weird that Windows gives me a 5.9... Read more

A:PLEASE READ BSOD mostly Graphics and Harddisk errors..at random times

Hi,

Please read the following and respond accordingly.

http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 112.4

Just browsing the internet and listening to music each time.

Windows 7 Home Premium x64 OEM
Only hardware changes are installed a new sound card a few weeks ago (Creative Sound Blaster X-Fi Titanium HD), and just got a new keyboard (Ducky Shining).

Attached is a zip containing a bluescreenview report, the perfmon report and the Windows_NT6_BSOD_jcgriff2 folder.

Hopefully someone has an idea what is going on.

A:3 random bsods the past few days

Problem Devices:
Code:
ATI High Definition Audio Device HDAUDIO\FUNC_01&VEN_1002&DEV_AA01&SUBSYS_00AA0100&REV_1002\5&16205E24&0&0001 This device is disabled.
ATI High Definition Audio Device HDAUDIO\FUNC_01&VEN_1002&DEV_AA01&SUBSYS_00AA0100&REV_1002\5&84473A4&0&0001 This device is disabled.
High Definition Audio Device HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_104383C0&REV_1003\4&1DDE902D&0&0001 This device is disabled.
Were you aware of the above? If so, please explain your troubleshooting steps.
Problematic Software:
Code:
Start Menu\Programs\AMD\OverDrive Public:Start Menu\Programs\AMD\OverDrive Public
Start Menu\Programs\ASUS\ASUSUpdate Public:Start Menu\Programs\ASUS\ASUSUpdate Public
Start Menu\Programs\MSI Afterburner GOD-PC\GOD:Start Menu\Programs\MSI Afterburner GOD-PC\GOD
Start Menu\Programs\SlimDrivers Public:Start Menu\Programs\SlimDrivers Public
We do not recommend automated driver update software. It often finds drivers for devices similar to but not exactly the same as the hardware actually on the system. This can lead to conflicts and blue screen crashes. If you need help finding driver updates for a certain device, please start a thread in Drivers - Windows 7 Forums instead of using software. Driver updates are not always necessary and some updates can actually decrease system stability rather than increase it, so it is usually better not to update unless a device o... Read more

Read other 3 answers
RELEVANCY SCORE 111.2

I've been getting random BSOD's recently and my PC was set to automatically reboot so I never made note of the error codes! I have sice turned off the auto-restart and noted the error codes. Below are the most recent from the past couple of days.....

IRQL_NOT_LESS_OR _EQUAL.
STOP: 0X0000000A (0X0000000,0X0000001C, 0X00000001, 0X804E1BF8)

BAD_POOL_ERROR
STOP: 0X00000019 (0X00000020, 0XE35261A0, 0XE35261A0, 0X0C00002)
STOP: 0X0000008E (0XC0000005,0X805515A1, 0XA7A51AF8, 0X0000000)
STOP: 0X0000008E (0XC0000005, 0X805519E9, 0XBA49AA98, 0X0000000)

BAD_POOL_CALLER
STOP: 0X000000C2 (0X0000007, 0X000000CD4, 0X0000000, 0XE1949B48)

SYSTEM DETAILS...
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name OWNER-*****************
System Manufacturer TriGem Computer NETHERLANDS
System Model Advent Series
System Type X86-based PC
Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~3401 Mhz
BIOS Version/Date American Megatrends Inc. 1002.004, 16/08/2004
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United Kingdom
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name OWNER-**********************
Time Zone GMT Standard Time
Total Physical Memory 2,560.00 MB
Available Physical Memory 1.48 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1... Read more

A:Random BSOD's and even more random stop errors

When did you buy this TriGem computer, and have you contacted them.
I worry about any computer built by TriGem as they are closely affiliated with the often failing eMachines models... and often failing hard drive failures.
Their motherboards go bad as they age and curl...
What you describe is typical of the motherboard problems.
In many cases, Tri-Gem makes the motherboards designed by Intel and others, in their own factory under license to the original manufacturer.
Of these "licensed" boards, we have found failure rates as high as 65%.
Document all contact efforts.
I would immediately keep documentation on all contacts, and with the seller.
 

Read other 2 answers
RELEVANCY SCORE 110.4

Hello, Im new here so bare with me I built my custom pc a year ago now. Since day one iv been experiencing BSOD. At first it happened during or just after the first boot up of that day and was always Memory Management error. Soon after, i upgraded my ram from 4gb to 8 gb. After doing this the BSOD stopped happening as frequently, but started to happen more randomly. My Bsods were very unusual, i couldnt find anything like it online, instead of the blue screen, i got a pink and blue or a green and blue screen and was very difficult to make out what it said but i could usually make out the error.
For some strange reason i started to get other errors such as IRQL_NOT_LESS_OR_EQUAL, PFN_LIST_CORRUPT, PAGE-FAULT-IN-NONPAGE-AREA, SYSTEM_THREAD-EXCEPTION and BAD_POOL_HEADER. I downloaded BlueScreenView to see what he problem was and they were nearly always caused by ntoskrnl driver and sometimes atikmdag driver. Ithen upgraded my GPU and the BSOD continued to happen but i got the normal fully blue screen and the green and blue or pink and blue screens stopped happening. I never get a BSOD during gaming, its nearly always either internet browsing or low level tasks or sometimes at boot up.I dont know if this is related but my browsers crash quite frequently too.
In the last few months i thought i had fixed the problem by fixing my ram speed because they were running at a weird speed and once i put it back to 1600mhz it stopped happening any where near as frequently. BSOD h... Read more

A:Random BSOD at random times

Please follow these instructions: Blue Screen of Death (BSOD) Posting Instructions

Read other 12 answers
RELEVANCY SCORE 110.4

Hello. I built a PC two days ago and today I have had 4 BSOD's so far and I fear there will be more of them.

Today, the 28th, I've have 4 or 5 bsods and most, if not all, have had the 0x109 stop code.

A:Random BSOD's at random times on new PC

Post it following the Blue Screen of Death (BSOD) Posting Instructions .

Read other 9 answers
RELEVANCY SCORE 110.4

I have recently replaced the ram in my rig (4gb ddr2 667mhz) with 8gb ddr2 800mhz and was randomly experiencing BSOD's. done some searching, and decided to "underclock" the ram to 667. this helped for a while until a recent restart of the pc. Ran memtest86+ on both speeds (667 & 800mhz) and only got errors (8) on the 800mhz speed, and not exactly sure why. I have attached a dump file (not sure if I did it correctly) to this post if its any help at all. any help would be appreciated. thanks

A:random BSOD's at random times

Chuck if you got errors then mate you need to get the RAM replaced - it wouldn't matter if it were one or one hundred errors the RAM is still faulty.

PS Welcome to the forum

Read other 7 answers