Over 1 million tech questions and answers.

IBM Lenovo N100 3000 laptop that keeps shutting down

Q: IBM Lenovo N100 3000 laptop that keeps shutting down

I have a IBM Lenovo N100 3000 laptop that keeps shutting down at random, it doesnt matter what you do it shuts off when it feels like, what i notice is if it is off for a while it will stay on longer before the first shutdown but once the first shutdown occurs it just keep on doing so as soon as around 5 minutes after bootup.
I thought it was having a heat issue so I opened the section where the fan and processor heatsink is and cooled it manually with an external fan, i actually had my hand on the processor heatsink one of the time when it shut down and it was extremely cool.
I reformatted my hard drive and installed a fresh copy of windows...same problem
I went into BIOS and left it there to see what happen...it shut right off just the same!!!
(I also noticed in the BIOS there is no power management nor temperature readings even though I have ruled out overheating previously I would have loved to see these settings)
so now i'm down to definitely a hardware issue!!
I replaced my memory to see if that was the culprit.....it shuts down just the same!

oops my battery is no good so I wondered if that was the influence so I removed the battery completely and booted it on just AC power...it shuts down just the same!
Could you experts please kindly advice me of what other possible hardware could be causing this problem?
I have tried my best, I really dont know what else to do.

RELEVANCY SCORE 200
Preferred Solution: IBM Lenovo N100 3000 laptop that keeps shutting down

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: IBM Lenovo N100 3000 laptop that keeps shutting down

Sounds like overheating. If the thermal paste has worn and/or is not making proper contact with the CPU heat sink and fan, your computer will overheat and shut down quickly, to prevent damage.

Also, the heatsink WILL appear cold in that case, because proper heat transfer isn't taking place, so the heat doesn't really transfer to the heat sink accordingly thus seeming "cold." If you can, re-apply the thermal paste or have a technician do it for you.

Another thing to do is make sure the fan and heatsink aren't full of lint/dust, etc. That can prevent heat dissipation and cause overheating.

If none of those work, you are looking at a different type of hardware problem, such as a faulty motherboard or CPU.

Read other 1 answers
RELEVANCY SCORE 104

My Lenovo 3000 N100 laptop, running Windows XP Professional keeps getting a message on the bottom right corner of the screen from the information message spot that says:

Windows - Corrupt File
C:\System Volume
Information\Restore
(A8393674-085C-4723-B63E-39928C5F4C89) -\RP1206 is
corrupt and unreadable. Please run Chkdsk utility.

I ran the Chkdsk utility and it ran 1 of 3, 2 of 3, and 3 of 3.
It stated:
File type is NTFS
Warning: F parameter not specified.
Correcting error $ 130 for file 11593

then went on to repair many errors. But it didn't change the Window -Corrupt File note/warning. The computer runs for a while, then craps on me and freezes up. Any help appreciated. Bill

A:Lenovo 3000 N100 laptop has corrupt file

Try running system file checker

http://ask-leo.com/what_is_the_syste..._i_run_it.html

Read other 3 answers
RELEVANCY SCORE 104

Despite being plugged into AC power, my Lenovo 3000 N100 shuts down after about one minute. It boots properly but suddenly shuts down. I have not used this laptop much since purchasing it in 2006 and have seldom used it on battery power alone. Any suggestions before I buy a new battery? Maybe I am mistaken, but shouldn't the computer work on AC despite a depleted battery?

A:Lenovo 3000 N100 laptop shuts down after about 1 minute

Hi Charleydog and welcome to the community,
 
Take the battery out  and unplug the ac.  Hold the power button down for about 15 seconds.  Do it twice.  Then plug only the ac in and see if it fires up.
 
Dave

Read other 3 answers
RELEVANCY SCORE 103.2

My laptop was working fine last summer until the Windows Genuine Advantage kept popping up telling me it wanted to verify if my OS was valid. I tried to shut it down or disable it and windows started to behave strangely to the point that it would not load at all. I purchased the laptop in December 2008 from Micro Center in Houston brand new. I have the sticker on the laptop that tells me the OS is valid.

Lenovo did not ship with the rescue and recovery disks, instead it has a rescue partition. The rescue partition would not restore the laptop. So I tried the rescue and recovery DVD I created. Somehow it did not create the product recovery CDs. When I called Lenovo about this problem, they belittled me and then charged me $50 for the set of Product CDs. I thought my troubles were over, wrong!

After installing the CDs windows almost loaded and then it went to the blue screen of death. This happened a few times. I tried reinstalling the disks and everytime I would receive a different error message, it is missing drivers, it can't locate a file, etc.

Today it returned:
The application or DLL X:minint\system32\umpnpmgr.dll is not a valid Windows image, Please check this against your installation diskette.

Product Recovery could not find file Z:\UBREC.CMD

I called Lenovo and again, no help. I am at a loss. My laptop was fine until the Microsoft Genuine Advantage pop-up kept showing up. And Lenovo is not providing any support for the faulty CDs they sold me.
... Read more

A:Problems restoring Lenovo 3000 N100 laptop XP Professional

I don't think XP is sold any longer, but if you can find an XP install disc, you can use it to delete the old partition(s) and freshly format the hard drive and install XP correctly
 

Read other 1 answers
RELEVANCY SCORE 93.2

Hello.I have a ( now ) ancient Lenovo 3000 N100.I don't like throwing things away and if I can get it restarted I would be pleased. Basically, it won't boot up.   I get a message: STOP: 0x000000ED (0x89B16858,0xC0000006,0x00000000,0x0000000000 ) Is there any SIMPLE way to just go to a factory reset ? .   I see posts saying 'press the Lenovo care button'  but where is that ?  what does it look like ?Others say stick a pin in a hole   ~but I cannot see any pin stickable hole anywhere ...... So what to do ?  I doubt if it is worth spending money on. 

A:Factory Reset for Lenovo 3000 N100 ? How ? Cannot see 'Lenovo Care Button' or pinhole anywhere

Hi jonblane1,1. May I know what Windows are you using? 2. You may try to access Lenovo System Recovery by pressing F11.3. If Step 2 does not work, you may refer to this link.
 
Peter
ThinkPad X40 | ThinkPad W520 | ThinkPad T560 | ThinkCentre E73 SFF | Yoga 11s | Yoga 3 Pro | Yoga 900 | Yoga Home 900 | Yoga Tablet 2 Pro | Miix 2 10" | IdeaPad Y460p | IdeaPad K1 | 3000 Y300 | Vibe K5 Plus
Give kudos to reward people for their assistance | Mark thread solved if the solution works | I am an active volunteer, not an Lenovo employee
=====================================
List of Sound Enhancement Thread
T520 | W520 ; Dolby ; IdeaPad Slate Tablet ; Yoga 3 Pro ; X100e ; Vibe Shot ; Yoga 900 ; P50 ; P40 Yoga | Yoga 14 | Yoga 460 ; T560 | P50s ; Vibe K5 | K5 Plus ; M0620 Speaker Mod

Read other 1 answers
RELEVANCY SCORE 92

I recently had to restore my laptop to factory default settings because of a virus that i had caught on my computer. With doing that i installed all of lenovo software for my computer such as sound drivers, built in webcam etc..my computer works fine but the only thing im having problems with is the usb ports. They are not reading any external devices such as my microphone and usb external devices..

Ive been researching and i think its the bios but not sure i downgraded to the previous bios but with doin that the sound didnt work and the wireless internet wasnt read either..then i updated to the bios and everything works fine except the usb ports still.i also tried to update the ports and uninstalling and reinstalling but it still didnt work

if anybody has any ideas on how to get this problem please reply to this post please its very appreciated
 

A:USB problem with lenovo 3000 n100

See How to Reinstall Your USB Controllers and Motherboard Chipset Drivers
See USB Device Problems? Check for Windows Updates as well
 

Read other 2 answers
RELEVANCY SCORE 92

I have the 0768-a49 model which came with vista business. I downgraded to XP pro sp2 ever since then i've been having alot of problems. I even try going back to vista, but didn't help, so i just kept it at xp........1-finger print reader doesn't work. installed driver, installed software,nothing. 2-same thing with bluetooth. the wifi and bluetooth switch is the same. wifi works, bluetooth doesn't come on at all. 3-usb connect disconnect when i press any button on the keyboard-tried different bios like stated in the other thread, but didnt work. 4-sound works,but when i plug a headphone i get sound on from both headphones and laptop speakers. Can someone help me solve these problems, especially the usb. I been using alot of flash cards and i can't connect them to transfer files.....
 

A:Nothing but problems with Lenovo n100 3000

You should go to the Lenovo Driver Matrix, to download and install all drivers listed, using the text explanations exactly.
When done properly, your Lenovo 0768-A49 will work just fine.
As a shortcut, you can install the Systems update 3.14 by your model:
· H100
· J100
· J105
· J110
· J115
· J200
· J200p
· J205
· K100
· Q100
· S200
· S205
. C200
· N100
· N200
· V100
· V200
· Y100
Or you can connect to the Lenovo site and let their system tell you what you need and install it for you.
Basically, you need the Chipset most importantly, being sure your BIOS is up to date.
The Matrix will show you exactly what you need... it can be as many as 35 download installs, depending on your exact model.
Or you can buy the Lenovo WXP Professional disk set by telephone for less than $50 including shipping.
 

Read other 14 answers
RELEVANCY SCORE 92

Hi.I've got some problems with my computer. 1. Due to some unexplainable reason, whenever I type something on the keyboard, all my USB ports stop working for the time I'm typing. When I stop typing it takes a few seconds to recognize the USB device currently attached and it starts working again.  2. Another problem is with my sound driver. It's kind of messed up. I can't hear any sounds from the speakers unless I've plugged in headphones. And while they're plugged in I can hear sound from both, the speakers and the headphones. At the moment I've disabled front panel jack detection and I can hear sound from the speakers without having to plug anything in, although when I do, I don't hear sound from the headphones, but still from the speakers. 3. I haven't been able to find any working drivers for my SD card reader. 4. The driver for the fingerprint reader does not work. The device manager shows that I have AuthenTec AES2501A installed but when going to Biometric devices in the control panel, it says that Windows didn't find any biometric devices. 5. I've been unable to get my bluetooth device to work. I've tried adding a new device and it can't find any, even when I have several working near the comupter. Also, trying to see all the devices I have connected to via Bluetooth, the window pops up and never stops loading. Without showing any devices. I'm using Windows 7 Ultimate 32-bit. Lenovo 3000 N100 0689. I would appreciate some hel... Read more

A:Lenovo 3000 N100 trouble.

did you try to perform clean windows installation by pressing one key recover button?

Read other 9 answers
RELEVANCY SCORE 92

I have a Lenovo 3000 N100 (0768-2CU) and I can't seem to find the drivers here... My model doesn't show in the dropdown slection under drivers & downloads.  If did find the drivers for the N200 but I have the N100.   Anybody know where I might find them?










Solved!
Go to Solution.

A:Lenovo 3000 N100 Drivers?

Good day and welcome to the community.
 
Please visit the EOL driver site: http://download.lenovo.com/eol/index.html
Once you make your selections in the three dropdown menus, you should be presented with your driver listing.
 
Hope this helps.
Regards.

Read other 5 answers
RELEVANCY SCORE 91.2

Hello community. I am owner of this old laptop. As I am a student i've gained access to free Microsoft software - including Windows 10. I've always used Xp on this laptop before but now i wanted to try out this new OS. The problem is, that everything works fine besides that i have no sound. In audio device tab i only have S/PDIF audio device which generates no sound from speakers(obviously). I have already tried drivers installed from EOL in compatibility mode but with no luck. Any ideas how to fix that?

Read other answers
RELEVANCY SCORE 91.2

Dear all I have troubles with my battery on my old LENOVO 3000 N100 0768 I would like to reset battery , but power manager can not detect my battery, there is text" battery is not installed" Could you tell me correct version of power manager and HOTKEYS for that  model, which is working. Or is there any other possibility how to reset battery? Thank you very much Steve

Read other answers
RELEVANCY SCORE 91.2

I have an Lenovo 3000 N100 Notebook, TYPE: 0768-04U which came loaded with Vista operating system. The battery that came with it was DOA so I ordered a new battery from Lenovo which is working fine.

The issue I'm experiencing is as follows:

After using the notebook where everything is working just fine. No devices with any issues, I go through a normal shutdown and leave the notebook off for a day or two with the new battery in (fully charged) and the power cable plugged in.

Upon trying to boot up, the Rescue & Recovery process kicks off automatically and Vista will not boot. However, if I take the battery out and unplug the power chord and leave it sitting for a day or so and then put the battery back in and plug the power chord in, it boots up with Vista with no problems.

Anyone have any ideas on what might be causing this or what to do to remedy this situation?

Thanks!
 

Read other answers
RELEVANCY SCORE 91.2

Greetings, This isa free laptop, Lenovo 3000 N100. I bought a power supply for it. It was running a Non-Genuine version of Windows 7 so I formatted and installed Puppy Linux. Problem: The fan runs for a couple of seconds during bootup, then no more. The laptop will shutdown randomly, I assume from overheating but I don't know that. The battery is dead so I pulled it out and am running straight off the power supply. I pulled the fan out and taped (3) 1.5V batteries together, hooked some leads to them and found that the fan runs fine and continuously. I cleaned out all dust found in the air vent. This has not fixed the problem. Something is telling the fan to shut off. Don't know if this is a motherboard problem or what? It is so far a free computer aside from the power supply. Any ideas? Thanks,Doug 










Solved!
Go to Solution.

A:Lenovo 3000 N100 Fan Runs 2 seconds

Welcome to the Lenovo Community !
 
The fan problem maybe why the computer was free especially if you dumpster dived it.
 
With the fan wired to the batteries does the computer still shut down randomly?  You could also see if Linux has any apps or software for temperature monitoring to confirm overheating.  If overheating is an issue you should probably renew the thermal paste and see that the heat sink is securely mounted.  Either of those can lead to high temperatures.  If overheating is not an issue it just might be that the computer isn't getting hot enough for the fan to kick in for additional cooling.

Read other 6 answers
RELEVANCY SCORE 91.2

Hi everyone,

I have recently acquired a Lenovo 3000 N100 768-BXG and like many people with the N100 have massive USB problems.

Now I have read up and discovered that this is a problem with the BIOS which seems to affect all the available BIOS except the 1.08 version for machines preloaded with Vista - well I have the 2.06 BIOS for machines preloaded for XP.

I have read that I can flash the BIOS to an earlier version designed for the C200 (specifically that contained in the 63af02us.exe update, DL20102A.WPH) which is I think the 1.02 BIOS - then I can reboot and it will then allow me to flash to the fixed (ie: USB working properly!) 1.08 BIOS.

Now for the meat of the question: I have installed Win7 on the laptop as it came with no HDD thus no recovery partition etc. Do I have to wipe this install and install WinXP Pro in order to perform the BIOS flash? Can it be done from Win7 safely or at all?

I have never flashed any BIOS except my router although I am fairly confident that I have read and understood everything required. My problem is that I don't really understand the detail of BIOS and am only able to post this due to scouring other people's posts on this and other forums.

Can anyone out there confirm that I have the process correct, and answer my questions?

Thanks in advance to anyone who can help me

Stokey

EDIT: The laptop has no battery at all - I know it is recommended to have a charged battery before BIOS flashing but is it essen... Read more

A:Help resolving USB problem with Lenovo 3000 N100?

If there is a downloadable Windows based bios flashing utility from Lenovo for your model laptop you should be able to use it to flash the bios without much trouble, regardless of the Windows version installed. Don't worry about having no battery installed. Bios flashing should never be done on battery power alone. If the laptop can boot from the CD/DVD you could flash the bios using a CD/DVD image. You will also have an option to back up the current bios to a file. If the bios flashing fails, the laptop may be rendered useless, so no recovery can be attempted
 

Read other 4 answers
RELEVANCY SCORE 90

Hello Everyone !

I have a Lenovo 3000 N100 0768FGG model. I'm facing a problem when I press any key on the keyboard any device connected to USB port disconnects and reconnects. This is really frustrating I've been searching for the solution on the internet for quite some time and I came across this board. So please can anyone help me with this problem? It will be a great help if anyone can advise a solution..... Thanks

Kind Regards

Faisal
 

A:USB disconnects when any key is pressed on the keyboard : Lenovo 3000 N100

Yes Faisal,
a bios upgrade will fix this issue. Check for a bios update from Lenovo support
 

Read other 20 answers
RELEVANCY SCORE 89.2

Hi,
 
I am using Lenovo 3000 N100 laptop. I can't able to open the windows as it shown the "Blue Screen Error Message". Whatever I do to try to fix the issue but its still does not work.
 
What should I do? Thank you
 
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
                     Moved posting to it own thread

Read other answers
RELEVANCY SCORE 89.2

Hi there,
Can anyone help me? I'm quite desperate here.
I'm having problem with my keyboard/USB.
When I press any key on the keyboard, that instant all USB devices are disconnected. And soon after I unpress it, the system will detect all USB devices like they were just plugged in. I say all USB devices, cause it doesn't matter USB mouse or USB drive, they all get disconnected.
It's frustrating me cause I can't use a USB mouse.
Please help

I'm using a Lenovo 3000 N100 0689GRA.
 

A:Solved: Pressing key disconnects USB Lenovo 3000 N100 0689GRA

How many USB ports does that have? and what are connecting them. If you could also please look in your event viewer (Start>control panel>administrative tools>eventviewer, and check the "SYSTEM" area. double click any item in that list for a detailed description. You should see some errors.
 

Read other 29 answers
RELEVANCY SCORE 88

I have this 3000 N100 laptop for over a year now with no problems (except the lousy battery which died in 6 months and I'm running on A/C since then). Last week I started laptop and this shutdown problem started appearing. System would start normally and then would suddenly power itself in 2/3 minutes (most of the times, but sometimes in runs for 2-4 hours before shutting itself down)I checked the fan and processor. Nothing is heating up.I changed processor. Even then it'd go down.I have made the fan DIRECT (always ON) but the system still shuts down.I tried hmonitor but it only reads HDD temprature which is 36-40C - I guess very normal. Now I wonder where the problem may lie. Is it motherboard? What part of board might be getting heat? Or is it actually heat? Or do I need to get certain parts (capacitor, I/C or something) on Motherboard replaced? Any help? Comments? Suggestions?     













Solved!

Go to Solution.

A:Lenovo 3000 N100 random automatically power off (complete shut down)

I have been having this same issue the past couple days. I power my Lenovo laptop up.. it will boot into Windows XP.. then after 2-3 minutes - it will shut down. If I try to boot up again, the same process repeats. It is running on A/C now and still does this ... could it be a battery issue still? This would be the third battery that I purchase for the laptop since I bought it new. Thanks...

Read other 9 answers
RELEVANCY SCORE 87.2

Hi. I was just given a Lenovo 3000 n100 (prod. i.d.# - 97684JU) laptop that had crashed. If I can fix it, it's mine. Yay!

Problem: Keyboard does not work. It has a fresh install of XP with Service pack 2 - which I believe was taken off a disk labelled XP Pro Svc pk 2, w/sata drivers for gateway - key preloaded - which was in dvd drive.

In device manager under other devices there is a list of devices marked as uninstalled drivers -
3 base system devices,
fingerprint sensor,
foxconn bluetooth 2.0 plus EDR,
Network Controller
PCI Device
SM Bus Controller
Video Controller
Video Controller (VGA Compatible)

The registered to in properties of My Computer has all the symbols for two lines. I have figured by trial and error that the keyboard is not working. USB keyboard and mouse do work.

I have a XP Pro cd, version 2002, unopened that I can use to reinstall the operating system - however this one I believe is for a compaq/hp pc.

My question: should I download all Lenovo drivers to a flash drive, and do I need anything special during install?

will computer recognize usb keyboard and mouse if i am formatting and reinstalling opsys?

I am thinking that maybe with the disk they used that may be the reason why the keyboard does not work.

Or can I just install the drivers needed from the lenovo site, and then fix the "registered to" and "users" in the registry?

what would be my best bet here?

thanks for the help here.

A:lenovo 3000 n100 bad xp install - keyboard not working, 9 device drivers missing

the model number you listed appears to be wrong

put the correct model number in here

Lenovo Support - Download Drivers and Software (US)

Read other 2 answers
RELEVANCY SCORE 71.6

Hello folks, I recently picked up some second hand laptops as projects for spare time and to learn a bit more. One of these is a Lenovo 3000 N100. I'm not sure of the exact model as the COA sticker is worn away. The laptop came without RAM, Hard drive, or battery! I'm aware this may be more effort than its worth, but wanted to give it a go..... With RAM installed, the white Lenovo splash screen displays (sometimes quickly, sometimes takes ages) - if i press Esc then the following info is displayed: Unknown Project ID!!! BIOS Version ??? 61ET32WWCPU = Intel (R) Celeron (R) M CPU 410 @ 1.46GHz1023M System RAM Passed1024K Cache SRAM PassesSystem BIOS ShadowedVideo BIOS shadowedCD ROM.....Mouse Initialized Pressing F1 or F12 does not do anything. The following errors are then displayed, which from Google I can see is a common problem. However, I cant find a fix that applies to me. PXE-E61: Media test failure, check cablePXE:MOF:exiting PXE ROMOperating System not found. From what I can see online, the laptop is trying to boot from a network/LAN. I tried an XP boot CD with no joy.I can't access BIOS to change boot priorities.The RAM appears to be functioning judging by the above messages?I tried putting in a blank HDD and removing it (tested HDD using novatech USB SATA adapter, appears to be working fine). Is my next option to reset the CMOS battery? I should add that on the first screen I initially received error codes 0271 and 0251 regardi... Read more

A:3000 N100 PXE Error, won't boot to BIOS

Welcome to the Lenovo Community !
 
I'm not an owner of your model, but in reviewing the Hardware Maintenance Manual for the N100 it notes that you must press the Lenovo Care Button when the computer is powered up.  You will then be presented with a menu from which you can access the BIOS Setup.  Page #104 of the manual will show you the location of the Care Button.  Here is a link to that manual for your reference......
 
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/42x3553_03.pdf
 
As for clearing the CMOS, it is probably not needed.  If the time and date were cleared and you received a CMOS checksum error then all the information stored in the CMOS was likely cleared  when the battery lost power from sitting unused.
 
Once you are able to get into the BIOS you should be able to correct the boot order so that you can use the XP boot disc.
 

Read other 9 answers
RELEVANCY SCORE 71.6

Please tell me from where I can buy 3000 N100 0768 battery in India

Read other answers
RELEVANCY SCORE 70.8

I had to open the laptop casing and used this to wipe the usually hidden edges of the sensitive surface of the touchpad with a damp cloth. After reassembling and starting, the touchpad seemed working as the pointer responded to the touch. I had to re-attach the keyboard. After that the touchpad was not recognized. The connection to the mainboard seems fine but I re-plugged it. If relevant or not (assuming the touchpad is responsible only for moving and clicking), if the pointer happens over a link, the URL is shown, that is the pointer is active. 1) The connection to the touchpad seems to have no plug, i.e. is soldered, and I didn't check it. Should I, even after a short intervention that I did? 2) There is a dark glossy bulging surface ca. 1x.5" on the bottom (back) of the touchpad. Just in case, should this be open or covered? 3) Should I need a replacement, how do I find compatible ones?

Read other answers
RELEVANCY SCORE 68.4

Hello !I've this old laptop whici is still useful to me. Alas the hard disk died on me and I could not find the recue CD I made when I bought it.I was able to install Vista home basic using the key found on the sticked on the back (barely legible... ) And had to activate throug phone .... But the computer is running right. I was able to get the proper driver using Google but found nothing in the French support Lenovo website ...I would like to get all the proper software this laptop came with (Power management, update, fingerprint.... ).Do you know if there is a "legacy" support site ?Many thanks in advance for your help.

A:Lenovo 3000 N200 laptop (0769BAG) looking for Vista Lenovo software

Hi,
 
Yes, the EOL site is here and your machine is listed.
 
Regards,
Dave

Read other 1 answers
RELEVANCY SCORE 63.6

when i try dxdiag the buttons in directX features is ghosted and disabled i dont know how to enabled it... my directX is version 10 and when i start warcraft 3... it has an error... warcraft 3 unable to initialize it hast to be 8.1 or newer...
and i don't know what to do in the errors in my device manager
there is a video controller and VGA compatible <----- no idea and when i try some intel graphics controller it always says it CODE 10 cannot start...
and i dont know my chipsets PLSSSS HELP MEEEEE if know anything to fix my problem plsss help... if you want to know anything in order to help me just ask me
 

A:Many problems with Lenovo laptop 3000 G430

code 10 problems...

Hi Code 10 errors are linked to a driver that needs updating. You say when you look at 'dxdiag' screen the display is twisted, but that could well be part of the same problem. If you can see what you are doing, go into device manager, look for the entries that have a yellow triangle next to them. Right-click on each one, and choose 'update driver'. As long as you are connected to the net, you should get the driver updated. You probably will need to reboot your PC to have the new driver be effective. Hope that helps.
 

Read other 5 answers
RELEVANCY SCORE 62.8

Hello TSF, you guys have helped me a lot in many issues..Many thanks for that.. Now my GF is having some problems with her laptop..I googled a lot and couldn't find any solution.Now you guys are my only hope!!

Her laptop is Lenovo 3000 G430.. It was working fine until yesterday the screen start flickering while working and booting..At first it was random.It'll flicker for some time and then it'll turn back to normal.The last time when she was using it was flickering continously..Dont know what to do..I don't have any experience in troubleshooting laptops!! So please help me!!

What we have tried so far:
Unplugged the Laptop for some time..
Tried updating the display driver through device manager[but it showed its the best]

Please help us!!
Thanks in advance!!

A:Lenovo 3000 G430 Laptop Screen Flickering-Need Help

I am suspicious that the screen is somehow damaged and needs replaced.

You can run a virus scan, start in safe mode, but this sounds like a hardware problem with the screen.

Any shops around you that you can take the laptop to and see what it might cost to replace the screen?

Read other 4 answers
RELEVANCY SCORE 62

Hi guys,

I have strange problems with my Lenovo 3000 N200 (0769) laptop.
I wasn't able to find similar problems on the net and I hoped that you could help me to diagnose them.

The problems are as follows:
1. When I turn on the laptop, nothing appears on the screen and there is no POST beep. After a few seconds the screen gets brighter (but still black).
2. If external monitor is attached, I'm able to use Fn+F7 to toggle the display. Then I get the menu where I can choose to boot in a safe mode or to start Windows (the operating system is Windows XP) normally, but the display is corrupted - there are strange vertical lines on the screen. Here is how it looks:
imageshack.us/photo/my-images/696/dsc00010gr.jpg/
I tried that on two different screens and the result was the same.
3. If I choose to start Windows normally, the Windows logo is displayed for a few seconds (also with vertical lines):
imageshack.us/photo/my-images/193/dsc00011io.jpg/
After that, I get this BSOD:
imageshack.us/photo/my-images/809/dsc00012lh.jpg/
And the computer reboots immediately.

All problems started at the same time.

I'm able to boot in a safe mode.
The minidumps are attached. I tried analyzing them using "PEBrowse Crash-Dump Analyzer", but it gives me the error message: "Incorrect crash-dump signature".

So far, I tried doing the following:
1. Reinstalling Windows.
2. Running RAM test using Memtest 86+ v4.0, no errors found (stopped after 3 passes).
3. Disconnect... Read more

A:Lenovo 3000 N200 laptop blank display problem

Pull the hard drive out and see if the normal boot screen shows for a bit. You may see only a white cursor blinking in the upper left-hand corner of the laptops display
 

Read other 7 answers
RELEVANCY SCORE 61.2

Hi,
I have lenovo 3000 n100 0768HCQ laptop.I update my bios and after updating my system is not working well. When i press any key of keyboard ,all usb connected devices disconnects and after releasing key they get connected as they just have been plugged in.I tried with my old bios version to recover but it is not working . When flashing bios a blue screen appears and system restart.
What to do.. Please help me.......
 

Read other answers
RELEVANCY SCORE 59.6

Hey, please help.
 
My Lenovo z510 keeps shutting down randomly, probably like once a week. It happens when it's being used and you can hear the hard drive crunching away. It also seems pretty slow for an i7, my desktop is a 4 yr old amd (can't remember what) but it's much faster.
 
Warranty expires in a few weeks and already opened a case with Lenovo but those jerks said if they can't recreate the problem, then there is no problem. I need to go to them with some sort of proof something is wrong. I ran inteleburn and it seemed to run fine.
 
Fresh install of Lenovo Win8, 5 days ago.
 
Check logs
ERROR
The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000009f (0x0000000000000003, 0xffffe001931a98c0, 0xffffd000ace71cb0, 0xffffe00194552290). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 012515-23843-01.
 
-Here is the dump
https://drive.google.com/file/d/0B3CiWePNtaifejBaNEk3cWpXVjA/view?usp=sharing
 
ERROR

Unable to start a DCOM Server: {9B3BEB4E-1C5E-4A5F-BB36-2F6587DD34E2}. The error:
"193"
Happened while starting this command:
c:\PROGRA~1\mcafee\msc\mcmscsub.dll -Embedding
 
CRITICAL
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

 
Could it be a a charger I bought off of laptopbatteryonline.net? I'm pretty sure it's an OEM charger.

A:New Lenovo Laptop keeps shutting down

What is the noise of the hard drive like? A click or any other kinds of sound?

Read other 15 answers
RELEVANCY SCORE 58.4

Hi - About 50-60% of the time when I shutdown my laptop it takes an age (10+minutes) then crashes with a BSOD and a DRIVER_POWER_STATE_FAILURE message. If I leave it, it reboots and typically I can then shut it down normally.
I've attached the zip as requested. All help appreciated.

Thanks

A:BSOD DRIVER_POWER_STATE_FAILURE when shutting down Lenovo Laptop

Welcome to 7F.

There are a few things causing issues on your system, let's take a look at them one by one.



One

 Intel Graphics Driver

Your Intel Graphics Driver has been flagged, it could do with updating. Check the Lenovo support page for you laptop for a later version.
Code:
fffff800`04f4d718 fffff880`06186512Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
igdkmd64+0xbd512

0: kd> lmvm igdkmd64
start end module name
fffff880`060c9000 fffff880`06507220 igdkmd64 T (no symbols)
Loaded symbol image file: igdkmd64.sys
Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
Image name: igdkmd64.sys
Timestamp: Thu Aug 08 15:38:55 2013 (5203AD7F)
CheckSum: 0044D281
ImageSize: 0043E220
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 Intel Wireless WiFi Link Driver

Your Intel Wireless WiFi Link Driver has been flagged. It may need updating so check the Lenovo support page again, although it may be connected to #3 listed below.
Code:
fffff800`04f4d678 fffff880`06a6f230Unable to load image \SystemRoot\system32\DRIVERS\Netwsw02.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Netwsw02.sys
*** ERROR: Module load completed but symbols could not be loa... Read more

Read other 3 answers
RELEVANCY SCORE 54.8

Hello,
My laptop keeps shutting down after about 1-2 minutes of me trying to do anything on it. A few days ago an 'activate windows'  screen pops up. However, when I click it, it will not let me update or install. Today, it just keeps shutting down. I have not put in new hardware.
When the computer shut down this last time, it said installing updates. After about an hour of installing, the computer had to restart... When it did, I'm now getting a message saying, 'we couldn't complete the updates, undoing changes.'  Is this the end of life for my laptop I just got 2 years ago, new? I'm usually good with computers and I just can't figure this last one out.
Thanks for any help.
Stacy

Read other answers
RELEVANCY SCORE 53.2

guys , i am using inspiron 3000 model 3542 .. i just upgraded to window 10 as i saw dell message say that it already been tested but i had problem with shutting down ..
*if i use 1 hour or less it can be shut down but
*after i use 3 or more hour , when i shut down the screen goes black but the cpu fan still running .
i was shock tomorrow morning i wait up, i saw my battery low and red light on the indicator...
*plz help i also just updated my bios to a08 ( i not sure wether is bios problem or window 10 problem or driver)i even try full shut down but using cmd shorcut  shutdown /p , not help
currently testing turning off hybrid shut down will update the result soon .

A:Dell Inspiron 3000 (3542) window 10 issue (not shutting down)

I'm also experiencing this issue. When I shut down the screen goes black and there's heat still being generated by the cpu. When the computer is left for long periods or folded this is the same case, but when its woken from sleep the screen remains black and the pc does not come on even with power button. I have to hold the power button down to force it off and then start the pc 2 or 3 times over for anything to show on my screen (the boot process)

Same laptop (3542), windows 10 64bit all drivers updated through dell's website including the bios.
Maybe the bios update is causing the issue.
Please provide advice or suggestions on the matter.

Read other 12 answers
RELEVANCY SCORE 50.4

Hi,  I recently "regenerate" my old computer and I need to turn it on with my keyboard instead of powers button (I don't want to reach it everytime). I can't find option to wake up with keyboard in BIOS or new BIOS either Is there any possibility to find newer BIOS version to add wake up with keyboard ?

Read other answers
RELEVANCY SCORE 50.4

Before the problem occured my laptap working good. When I used the next day I power my laptap and it display black
no cursor and no text. Hardrive led blink one time and no more. No beeping heard. Cannot access bios setup.
What is the problem and how to fix it. Tried remove the battery and drain the power. Tried the ram testing and still have problem.
 

A:Lenovo 3000 G430

It could be a lot of things. but im guessing either a bad motherboard or a power supply problem.have it looked at so you will know what the exact problem is and then go from there.
 

Read other 1 answers
RELEVANCY SCORE 50.4

My computer has had lots of viruses and trojans. I've tried removing what I could. My Symantic AntiVirus and Spybot are no longer finding anything. However, my computer is still going extremely slow and keeps shutting down without warning for no reason. Here is what HijackThis returned for me. I am not too good with computers so any advice would be greatly appreciated!!! Thanks.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:46:07 PM, on 3/2/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16791)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Common Files\Symantec Shared\ccSetMgr.exeC:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exeC:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exeC:\Program Files\Lavasoft\Ad-Aware\aawservice.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\ThinkPad\ConnectUtilities\AcPrfMgrSvc.exeC:\WINDOWS\system32\acs.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\Program Files\... Read more

A:Help with Lenovo 3000 V100

Welcome to the BleepingComputer Forums. Since it has been a few days since you scanned your computer with HijackThis, we will need a new HijackThis log. If you have not already downloaded Random's System Information Tool (RSIT), please download Random's System Information Tool (RSIT) by random/random which includes a HijackThis log and save it to your desktop. If you have RSIT already on your computer, please run it again. Double click on RSIT.exe to run RSIT. Click Continue at the disclaimer screen. Please post the contents of log.txt. Thank you for your patience.Please see Preparation Guide for use before posting about your potential Malware problem. If you have already posted this log at another forum or if you decide to seek help at another forum, please let us know. There is a shortage of helpers and taking the time of two volunteer helpers means that someone else may not be helped. Please post your HijackThis log as a reply to this thread and not as an attachment. I am always leery of opening attachments so I always request that HijackThis logs are to be posted as a reply to the thread. I do not think that you are attaching anything scary but others may do so. While we are working on your HijackThis log, please: Reply to this thread; do not start another! Do not make any changes on your computer during the cleaning process or download/add programs on your computer unless instructed to do so. Do not run any other tool until instruc... Read more

Read other 2 answers
RELEVANCY SCORE 50.4

Hi, my GF's Lenovo 3000 V100 needs a new LCD and I have searched high and low for OEM info on the following FRU# LCD panel, 12.1-in. WXGA AG, Samsung 13N7184LCD panel, 12.1-in. WXGA AG, AUO 13N7182LCD panel, 12.1-in. WXGA AG, CMO 13N7180 I have been offered a Samsung LTN121W1-L01 LCD but can't determine if its compatible with her model. Can someone help here? If it were a thinkpad I would have no problem since there is actaully a whole wiki page dedicated to TFT LCD's found in thinkpad - would be nice to have the same for other models. With kind regards JBJ



Posts made by insomniac1971 is also mine.Thinkpads: T61, R61, R500

A:Lenovo 3000 V100 - Please help - new LCD

Welcome to the Forums JBJ! 
 
Please provide the Machine Type Model number.
Note: Please do not share system serial number here.
 
Let us know how you get on.
Regards,
Shashi
 
Tap that ?Star? button below to award a Kudo if I helped. If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

Read other 1 answers
RELEVANCY SCORE 50.4

I bought an all-in-one computer of Lenovo 3000 C3 series. I canīt find anything about bluetooth. Does that mean that this computer doesnīt have a bluetooth adapter embedded?  Or do I have to doenload aditional software? Or buy an usb bluetooth adapter?

A:Lenovo 3000 C3 and Bluetooth

did you check user manual?

Read other 6 answers
RELEVANCY SCORE 50.4

Having a problem with Laptop running XP, Lenovo 3000 C200-8922. I did a fresh install yesterday & updated to SP3. Under Device Mgr - Other Devices there is a ? mark on these items:

Audio Device on High Def Audio Bus
Base Sys Device
Base Sys Device
Base Sys Device
Network Controller
Video Controller
Video Controller (VGA Compatible)

Also, when I flip the switch for Wireless, no light & no wireless connection. I am hard wired right now & no Wireless Option. There is no sound at all. I've tried the Intel Chip set bios utility and even the Legacy Drivers. I am now locked out of the BIOS, not sure what the password is!

Thanks.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:16:06 PM, on 5/10/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Avast4\aswUpdSv.exe
C:\Program Files\Avast4\ashServ.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Java\jre6\bin\jusched.exe
C:\PROGRA~1\Avast4\ashDisp.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\agrsmsvc.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Progra... Read more

A:Lenovo 3000 C200

Read other 15 answers
RELEVANCY SCORE 49.6

I have a Lenovo 3000 J desktop that wont boot. As a point of reference, I try to hit the F1 key as the manual suggest and the F12 key as many have suggested and get nothing but clicking. I am not able to see anything on the monitor although I do know that it is working as I can see the no signal message.The light on the DVD/CD drive does flash but seem to get hung there. I recognize this is an older unit and If ican get it booted up will save all files to a remote drive and replace. Any ideas or help is appreciated BB

A:Lenovo 3000 J Series won't boot

hi Braddburm,
 
Welcome to the Forums.
 
It looks like the onboard VGA port gave out. Try to:
1. Use a discrete graphics card to output your video (i.e. pci or low profile pci-e graphics card)
2. If option 1 is not possible and you're considering a replacement machine, you will need a 3.5 HDD sata enclosure to convert the internal HDD to an external HDD to read the data on the new replacement machine.
 
 
Best regards,
neokenchi

Read other 1 answers
RELEVANCY SCORE 49.6

For the past 3 days, once/day, my Lenovo 3000 N200 shuts off by itself in the middle of use. It gives no warning signs and simply shuts off. I have also noticed over the past several months that the computer will only last a few minutes without being plugged in despite a full battery charge. Am not sure if this is related or not but I have had the computer plugged in every time it has shut off inexplicably. Does anyone have any idea what could be wrong and what I need to check into?

Thanks!
 

A:Lenovo 3000 N200 shuts off by itself

Some more details: I am usually multi-tasking when this happens and the fan seems very active at the time it shuts off. Could the computer think it is overheating for some reason and how can I check this? It does not feel particularly warm anywhere.

Thanks!
 

Read other 1 answers
RELEVANCY SCORE 49.6

Hallo everyone,It is already 10 years I own Lenovo 3000 N200 0769-AUU with t2330 CPU (old but gold).  A few days ago I have red lots of posts about upgrading cpu of it. Someone says that cpu fits on it someone says other fits and etc. The most interesting I have red is on this page: http://www.cpu-upgrade.com/CPUs/Intel/Pentium_Dual-Core_Mobile/T2330.htmlbut I was going to buy 4 core cpu q9100 which is not in this list. Can sameone help me, will q9100 work on my pc or I must choose cpu from list

Read other answers
RELEVANCY SCORE 49.6

I have just installed Windows 10 32-bit on this laptop. I am trying to locate the driver for the Fn keys specifically so that I can turn on the wifi with Fn+F5. Windows is telling that I need to physically turn on the wifi switch on the laptop, but as far as I can tell there isn't one and the only way to disable and enable the wifi.

Read other answers
RELEVANCY SCORE 49.6

hello everyone,i had a slowness problem in my laptop what is the solution for this problem ? and if i increase the RAM for 3 to 6 Gbwould it help ??Thanks,Ahmed

Read other answers
RELEVANCY SCORE 49.6

Hi I'm not finding the drivers for this machine  3000 C200 Notebook .It doesn't have a  internet connection since re-installing windows so can't use the autodectec facility and it doesn't seem to be listed ?I found a similar thread but the links supplied are now broken.Can anyone supply a link to the XP drivers ? ThanksPaul










Solved!
Go to Solution.

A:Lenovo 3000 C200 Drivers

Welcome to the Lenovo Community Paul !
 
Sorry to hear of your problem in locating the necessary drivers.  Due to the age of your laptop Lenovo has since moved the C200 downloads over to their legacy download library which can be found by using the link below.....
 
https://download.lenovo.com/eol/index.html

Read other 3 answers
RELEVANCY SCORE 49.6

Well, I've decided to downgrade from Windows Vista (which came with my notebook) to Windows XP. The only problem is that I don't have the drivers  However, I've come here to ask for help. Lenovo 3000 C200, precisely 8922-BJG.I'd like to know where I can find the drivers for my notebook so I can finally uninstall Windows Vista and start enjoying XP.Thank you all very much!P.S.  I really appreciate it.













Solved!

Go to Solution.

A:Lenovo 3000 C200 Drivers

Hi felixdcat0, welcome to the forum,
 
you should get what you need here

Read other 9 answers
RELEVANCY SCORE 49.6

Hello, I can't seem to find drivers to download for the Lenovo 3000 N200. I tried going to:https://download.lenovo.com/eol/index.htmlandhttp://pcsupport.lenovo.com/ca/en/products/laptops-and-netbooks/lenovo-n-series-laptops/3000-n200-no... But there is nothing on either. Please help.Thanks!

Read other answers