Hi, i cant find the hotkey support driver in the official hp driver page.Where i can download it? Thank you!! (ps. the hotkey doesnt work, and the wifi button neither. Keep orange light.)
I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system
It's worked out well for many of us in the past.
You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)
Hello @hysteriia95, Try this drivers: https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-elitebook-8560w-mobile-workstation/507... Hope this helps, for any further queries reply to the post and feel free to join us again !! **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP EmployeeRead other 1 answers
I cannot find a softpaq for HP ELitebook 8760w HotKey Support in Windows10. Does there exist one?Read other answers
I have a HP EliteBook 8560w SM858UC. My video card has stopped rendering properly or it has died and I was wondering what the highest upgrades are for that motherboards CPU and graphics?Also, I am wondering if it is at all possible that I can upgrade my motherboard to allow for a faster CPU and graphics card?Thank you for any help you can give because I cannot find any info regarding upgrades.
@Ccook7 What GPU and CPU do you have installed now??? REORead other 1 answers
I was thinking of upgrading the RAM in my Elitebook 8650w. I know the type of memory I need (DDR3 PC-10600 1333 Mhz) but I was wondering how many strips are build in already?I got the quad core version so my laptop has 4 slots, from which 2 are under the keyboard and I dont want to take the laptop apart. My laptop has 4 GB of RAM this moment. My question is, are there 2 strips of 2GB DDR3 RAM already installed or just 1 strip of 4 GB? Or is this something varying from factory to factory?
Yes, DDotDacherDash has a very good point to use the Support Assistant. Bur if you are like me, and you uninstalled all unnecessary software, you can also run the free Crucial memory scanner that will scan your PC and report the same info without installing any software. http://www.crucial.com/systemscanner/ PaulRead other 10 answers
This afternoon I left my Elitebook open and running on the table and when I returned half an hour later the screen was black. I figured it had gone to sleep but when I moved my mouse nothing happened. I pushed the power button, still no response. Even after holding the power button for an extended period of time nothing happened, aside from the power led blinking for a couple of seconds. I've already tried removing the battery etc, but it didn't work. All help is appreciated.
Have you tried removing the battery and power cable. Then hold the power button for over 1 minute. Then reassemble and power on?Read other 2 answers
I need HP support. I want to know can i run my HP 8560w by just removing my faulty NVIDIA Quadro 1000m rather than replacing it with the new one. As per my knowledge this shoud run on built in gpu, shared graphic memory even in the absense of external graphics card.Read other answers
Hi, I have had my Elitebook for almost 5 years now. It currently runs Windows 10 Pro 64-bit with 16 GB of RAM. I'm still running on the installed Hitachi 500 GB HDD, but it's getting a little slow for my taste and I'm worried it might fail at any time. I've been hoping to replace the 500 GB HDD with a 500 GB SSD from Samsung by cloning it, then wipe the old HDD completely, and THEN replace the optical bay with a new 2nd HDD of some unspecified capacity. My problem now: I have about 300 GB's worth of data (went to an engineering school). I spoke to an HP rep on a live chat who told me that the largest supported capacity for an SSD (that can only be in the primary slot) is 256 GB and the largest supported capacity for an HDD in the replacement bay is 500 GB. Rather than move and link my entire USER's folder to the 2nd HDD (which is possible but still confusing for me at this point), I'd like to get a second opinion from someone in the HP community. Is the capacity limitation a matter of drive height? BIOS limitation? Is it still possible to get a 500 GB SSD instead? I've seen in various forums that the user had a larger drive than suggested. Thanks.Read other answers
Hi every body, I am asking help from you. When I try to install any version of windows 7/8/8.1/10 with uefi, the installation stuck at copying windows file (0%), this problem came out after updating from windows 7 to 10, before the update i backed up my system partition and the efi one with windows image backup.when I try to re image my system the restoration hangs at the end after cleaning up.
run a chkdsk /R C: from a command prompt ..... UEFI is to do with the BIOS and only affects bootRead other 9 answers
I'm hoping someone might be able to help me diagnose this problem with my 8560W:It randomly hard locks up - ie the mouse/keyboard input stop and music playback freezes - about 10 seconds later the machine turns right off. I haven't noticed any pattern to when it does it - sometimes it'll go for a week with no problems, other times it'll freeze before the windows sign-in screen. I've tried a fresh windows install (but have also seen the lockups in safe mode) so I don't think it's a bad driver issue. There is nothing meaningful in event viewerI suspected it might be an SSD failing - so tried another and had the same issues. I've seen the lockups on battery, and with both the power adapters I have - also on AC with the battery removed.I've run the built-in efi extensive diagnosis a few times - all passing completely. I have cleaned out the heatsinks with compressed air - though they didn't look too bad. Keeping an eye on CPU temperatures - it does lock up some times when the temperatures are relatively low. Something I've noticed (and I don't know if it's a red herring or not) is that the system fan tends to not spin as much as it used to - ie I don't notice hearing it. I've tried to roll back my BIOS - but haven't been able to - in Windows it tells me I can't go back, and in 'bios' it tells me it can't find the signature. Any help at this point would be appreciated. I'd hate to have to throw the system out - it is still a ve... Read moreRead other answers
Dear EliteBook users,Did anyone try - and succeed - adding some memory module to the primary memory slot underneath the keyboard of an EliteBook 8560w?I needed some extra memory and successfully added two modules to the slots below the bottom cover. But I needed more, and had to add it to the remaining slot just below the keybord. For that I had to remove the keyboard, but that turned out to be an impossible task.The user-guide ("Getting Started", p.45 and on) tells you how to do that, but that is definitely not correct. For instance, there is no "keyboard release cut-out", as indicated in p.46. Also the force you have to exert on the keyboard back-side is dangerouly hight (dangerous for the keyboard and for your fingers). Googling for that did not help. In fact, a bit surprisingly, I have found other two user-guides for the same model, all of them with different technics to remove the keyboard, and all of them inapropriate. To make things worse, HP support in the Netherlands said they could do nothing for me, except sending me the same manuals I already have. And there is absolutelly no available channel to complain with HP about that!I'd be grateful for any information on that.Regards.G.Oliveira.?
Hi: You may find the actual service manual of more help. It provides detailed instructions on how to install the memory and remove the various parts to get to the memory module under the keyboard. See chapter 4 http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02844491/c02844491.pdf PaulRead other 9 answers
Hi everyone, I am in the need to upgrade the RAM on my ELitebook 8560w and I do not know how much ram i can add and what's best to buy! There are four slots in total and two are used with 4 Go ram memories. REASON: I am using this computer for 3D modelling and it s getting slow. Computer Make: Hewlett-PackardComputer Model: HP EliteBook 8560wComputer Version: A0000C02Motherboard Model: 1631Motherboard Version: KBC Version 01.3BCPU: Intel Unknown 2.3GhzInstalled Memory: 4 slots: 4 GB, empty, 4 GB, empty Spec ram: Type DDR3Size 4096 MBytesManufacturer Hyundai ElectronicsMax Bandwidth PC3-12800 (800 MHz)Part Number HMT351S6CFR8C-PBSerial Number 075DC11AWeek/year 22 / 12 Thanks for answering as soon as possible. Best regards, Julien
Hi, Julien: Below is the link to the quickspecs for your mobile workstation. http://isvpatch.external.hp.com/HPPTF2/drvlib/docs/8560w.pdf The memory upgrade info can be found on page 7.Read other 5 answers
I have an Elitebook 8560w with Windows 10 64 bit, 500gb PNY SSD, 8GB ram. I noticed it first onFacebook, firefox would freeze when I played any video. My GoPro Stodio was also very laggy. I did a complete restore... a fresh installation of Windows 10 64bit and reinstalled the drivers for my Quadro 1000m. I am stillhaving the same issues. I'm not much of a gamer so I haven't tested it on any games, but most video is terrible. Is it possible that there is a hardware issue? Any recommended diagnostic programs? Could I have the wrong drivers installed? I installed the latest drivers from the NVIDIA website. Please help! Thanks, RussRead other answers
Hello,i have problem with my EliteBook 8560w(With dual boot Windows 7 64bit and Linux Mint 17.3 if its important). When I plug it in AC charger it turns on by itself and after 2-3 sec. it shutsdown without warning. After shutting down the laptop can't be turned on using the power button. This occurs everytime I plug it in the charger. I get the same problem when I place the battery. I tryed the following: removing RAM, removing HDD, removing BIOS battery. Everytime the laptop turns on itself immediately when plugged in then shuts down after 2-3 sec. Its not heating problem either, because fan check is passing and I have recently replaced heatsink paste.When I plugged off the power button from the motherboard, the laptop stopped turning on when pluged in, but there is no way I can turn it on. Any suggestions what can be the cause of the problem and what solution can I try?Thank you in advance.Read other answers
I have a laptop that will not charge the battery with the AC Adapter. I have tried different combinations between two chargers and two batteries and I always have the same results. The only time it will charge is when I connect it to my docking station which is a Hewlett-Packard (HP) NZ222AA - HSTNN-I10X 120W Advanced Docking Station. The charger I have is an HP PA-1151-09HA TPC-LA52 Adapter. The second charger is from another laptop. That is also the charger used in the docking station. That is an HP PA-1231-66HJ. I have tried both of these chargers in my EliteBook 8570p and they were both able to charge that laptop. The laptop will run with the charger, without the battery. The only message the battery icon displays is "No battery detected". If I then attach the battery with the laptop still on, the message will change to "xx% and not charging. It will then run on battery power until it dies. At that point, it will turn off. If I followed the same scenario but unplugged it after attaching the battery, the message with change to "xx% and in use". If I try to plug it in after that, it will continue to say "xx% and in use". It will not change back to "xx% and not charging". If the laptop was started with the battery in and then I plug it in, it will always say "xx% and in use". If I start the laptop with a battery and the charger, it will say "xx% and in use". I have tried updating the bios to VERSION: F.28 because I found an article that w... Read moreRead other answers
Elitebook 8560w all drivers and BIOS are up to date. Win7 is fully up to date. Nothing in event viewer other than the previous system shutdown @ whatever was unexpected. Can't replicate it. I've left it on for a day a few times over and this evil power down won't show it's self. Did it yesterday during a powerpoint presentation in front of 30 people. grrrrrrr! Hit the power button and it fires up whitout issue. Fan's are fine, it's not getting hot. Batt and power are fine. Is there a low level diag I could run on it? An ideas before I just toss it?
this has also been happeing to me and i really hate when it does i have done everything to try to fix itRead other 1 answers
Hi all, is there any way I can get to the advanced BIOS settings on my Elitebook 8560w? I remember on the Envy you culd press the F10 key and A key and it would get you to the advanced features...
ccvortex wrote:Hi all, is there any way I can get to the advanced BIOS settings on my Elitebook 8560w? I remember on the Envy you culd press the F10 key and A key and it would get you to the advanced features...Are you pressing the F10 key when the HP logo appears (when you first hit the power button)? According to this, it should be F10.Read other 5 answers
Hello.I own an elitebook 8560w since 2012.I had never ever used its battery,because actually i never needed to (I used it pretty much as a desktop). Yesterday,i bought a genuine hp-battery specific for my computer.And here is the problem that occured:While my computer is ON with the battery disconnected,when i connect the battery,the power switches from ac to battery like it should,but the battery is NOT charging. Moreover,i dont have the "plugged in,not charging" problem like most of other people in forum discussions,but right after the moment i insert the battery,the charger connected to my laptop is totally ignored!Like its not connected at all! As a result,if i disconnect the battery,the laptop power doesnt switch back to the charger,but shuts down ,as it doesnt "see" any power supply.Not only that,but even if it shuts down it will not start up,until i disconnect and re-connect the charger (maybe because it is still waiting to get power from battery which was disconnected and is not switching to the charger supply). Finally,i ran a battery test in hp connection manager and result was that battery is "OK". I have my laptop on dual boot (Windows-7-64 / Kali-linux ) and all these problems above apply to Kali as well,which leads me to the conclusion that it isnt a software problem. Also,i have to mention something important: After the original charger i had bought the laptop with,stopped working 3 years ago,i didnt buy the genuine,but a universal... Read moreRead other answers
My hp elitebook 8560w workstation has suddenly stopped working. It does not power up from the power button anymore. After several attempts, I managed to power it up, yet in a very unusual way. In order to turn it on, I have to remove battery and unplug the charger, press the power button once, return the battery and press the Quick Web button. Only by doing so, the lapton turns on normally. Couple of other things to notice as well. First, when the Laptop enters the energy-saving mode, it shuts down completely. Second, the Windows 7 welcome sound comes late (roughly 5-6 min. after boot-up) I know that these symptoms might be caused by different concurrent issues, but I would appreciate it, if you can help me out with this case. Thank you in advanceRead other answers
HI there, I have 2 monitors connecting to my HP EliteBook 8560w Workstation, I can have the full resolution on the primary monitor at 1920x1080 but not the secondary one. I think there is something wrong with Graphic Card or Driver since when I connected those monitors with my company HP laptop the resolution are correct at both. Can you please help to advise? Thank you, Regards,SteveRead other answers
I know in the past it was noted that you could not install these cards in a whitelist enabled BIOS, but has HP changed or updated the ability to install these cards on these specific older computers? If not, PLEASE HP, help your existing users. Please remove the whitelist from these older BIOS, specifically the ELITEBOOK 8560W. Thanks.
You still have the whitelist. It is not present in computers having an Intel Core 4th gen and higher CPU, but yours is second gen so the whitelist is still a problem for you. People have been asking for "de-whitelisted" BIOS for these machines for years and it has never happened so I can't hold out any hope it ever will. These two devices will work: Intel Centrino Ultimate-N 6300 802.11 3x3 a/g/n WiFi Adapter 572511-001Intel Centrino Advanced N 6205, 2x2 a/b/g/n WiFi Adapter 631954-001 The 6300 takes 3 antenna and the 6205 only two. Both are 2.4 and 5 ghz compatible devices and are pretty good wireless cards, just not 802.11ac. https://www.amazon.com/Ultimate-n-6300AGN-Wirless-THINKPAD-572511-001/dp/B01EDT6I2C/ref=sr_1_1?ie=UT... https://www.amazon.com/Replacement-631954-001-Intel-PCI-express-Wireless/dp/B00TI8CMX8/ref=sr_1_1?ie... The above are very strong wireless cards, particularly the 6300 with 3 antennae if your laptop has 3 antennae. I am sure it has at least 2. I wish I could link you to a workable 802.11ac card but I cannot and these are the best you can get. If this is "the Answer" please click "Accept as Solution" to help others find it.Read other 1 answers
So i got 2 questions that i cant find a answer two and i hope you can help my.1: das the dock station require drivers or is it just plug and play and das it work whit linux. (i run ubuntu 14.05) ?link to the dockstion2: can i run 2 screens @ 4K 3840x2160. of the 2 display pordt on the back of the dock station ?I don't know if i'm allowed to link to the monitors because the art form hp :/ My laptop specs:Intel Core i5-2540MNVIDIA Quadro 1000M16 GB ram Thank you in advance and kind greats SanderRead other answers
Hello Everyone ! Hope you are all having a blast ! I need some help, here is the issue with my HP EliteBook 8560w. When I remove my AC power adaptor cable charger, my Laptop turns off in around 5 to 10 seconds abrubtly without any warnings but this only happens at times NOT all the time. Now I dont know why this happens but i lose my work & its becoming really discomforting. I am using Windows 7 Professional 64-bit. Kindly bail me out here sir.Read other answers
Product number = XU083LA
SERIAL NUMBER = [Personal Information Removed]
UNIVERSAL UUID = F224B588DA36E111B63048C57201COFF
@cgamarra There are no master passwords for ProBooks and EliteBooks. Contact HP. http://welcome.hp.com/country/w1/en/contact_us.html Or download these files. https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?dl=0 Insert clean USB flash drive. Then run USB Image tool. Choose the flash drive then click on RESTORE. After restore remove flash drive. Insert flash drive into locked laptop and boot.?If HDD is installed remove before booting.? At C:\OUTPUT type CD.. ?Then hit enter? Type HPBR ?Then hit enter? First thing is to save your settings. Select #3 re-program. Press ?S? to save system information. Type HPBR and hit enter. Select ?FIRST RUN? Then select model. After reboot repeat same as above but this time SELECT ?SECOND RUN? Some instructions here. ?If you cannot boot from USB there are instructions to make a bootable HDD.? http://mazzifsoftware.blogspot.com/2014/01/hp-bios??-unlock-for-dos.html More here. http://forums.mydigitallife.info/threads/49497-HP-??Probook-Elitebook-BIOS-Password-Reset-Utility REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.Read other 7 answers
Hi, I got an problem with Hotkey sw to adjust brightness in Windows 7 64 bit.The volume (UP, DOWN), Keyboard light (ON, OFF) works but setting the brightness with FN+F5, F6 not. I installed the newest version "Version:22.214.171.124 Rev.A (9 May 2016) " from webpagehttp://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_165983_1 How can I get it work? Thanks for info.Read other answers
Hi everybody, After installing Windows 10, the following Hotkeys do not work: f9 and f10 for the Brightness adjustment and fn+Esc. I can adjust it from the power options manually, but I would like to use the Hotkeys for that. Indeed, I have updated all drivers. Any solutions? Best,SergeyRead other answers
HiI've just updated my Elitebook 8570W operating system into windows 10, and i am trying to install the hotkey support driver, but at the of installation a box appears, it written inside that "The software is not supported on this system".Despite i installed the driver from HP website and i choose Windows 10 from the list.Anybody can help me please?Read other answers
How to recover unbootable laptop? Received Acronis True Image with Kingston SSD purchase. Loaded it, ran it from Windows, selected source; internal HDD, and selected target; external USB attached SSD. Acronis True Image then wanted to reboot to begin the transfer. Upon reboot I had to swipe my fingerprint as usual for reboots. Then got MBR error 3 Then the boot process continued straight to Startup Recovery - found a problem, repair failed with error code 0x490This the current status and has not changed. Tried these cmds C: , diskpart /fixboot (successful result but no help) , diskpart /fixmbr (successful but no help) diskpart /ScanOS fails with no OS found ALSO - In BIOS I removed the Security password fingerprint requirement to speed all of these reboot attempts. Did I just lock myself out of the C: partition for good.? Appreciate any help and advice this forum can give to help me recovery the HHD and C: partion. ALSO 2: I scanned the HDD with Partition Wizard and it finds all the partitions though the big partition which I presume is C is listed with no label, 445GB, full, and unknown instead of NTFS. cripesRead other answers
Hello, I'm using HP ProBook 640 G2 with Windows 10 v1607 Build 14393.693.I installed all drivers and anything is working fine except the Hotkeys. Fn+F1/F8/F9/F12, the I/O, wireless and mute switch are working by default, but Fn+F4/F5/F6 and F10 aren't working. When I try to install the Hotkey support I get the error 2753 "The File 'lanwlanswitchingservice.exe1' is not marked for installation." I tried version 126.96.36.199 Rev.A and 188.8.131.52 Rev.A. Same error.I have a workaround for the problem using the windows battery symbol, but I would like to use the keys. Can you help me? Best regards,AlexRead other answers
Does anyone have any ideas on how to install "HP Hotkey Support" silent? It currently requires admin permissions after rebooting.It was exactly the same problem with Quick Launch Buttons earlier but there were at least "KbdHook" parameter that solved problem.
Try installing the latest HP Hotkey support software from the following weblink:ftp://ftp.hp.com/pub/softpaq/sp53501-54000/sp53547.exeRead other 6 answers
I have installed HP hotkey support on our new model of laptop (Probook 650G2). But it does not adjuct the brightnessvia the FN keys. We are using Windows 7 Enterprise. I have tried different versions of the hotkey support software but still wont work. The volume keys work fine. All the drivers are upto date with HP support assistant.Read other answers
Hi ALL,I updated drivers for my note book, HP model 15-ay031TU, but when istalling Hotkey support, i get error message, 'This software is not supoorted in this machine. I am runnging Wn 7 SP 1.Thanks.Read other answers
I recently reinstalled Windows 7 on my PC, coming from Windows 10. Installed all the drivers and upgraded bios without any complications at all. But when I press a hotkey-combo, for example FN+F5 to lower screen brightness, I recieve an error saying "hpCaslNotificiation has stopped working". If I press this, or any other FN+key combo I'll get this message (even though the screen does in fact dim). Even if I press ten times, I will get ten error messages on top of each other. I have the latest Hotkey Support drivers installed right now, and I have tried to install an earlier version to no avail. Can anybody help me? Probook 640 G2, I5, 16GB RAM, 256SSD Win7 Pro x64 RegardsRead other answers
I had set the 'Black Button' on my T430s to lock my computer. I've used it for several years. System Update just installed ThinkPad HotKey features Integration 8.85.03 and now my Black Button is dead. The last know good version was 8.80.05. Does anyone know how I can either revert to the older driver or set the newer version to lock my computer when I press the 'Black Button'. Thank you.Read other answers
I installed Windows 7 Ultimate x64 and downloaded all the drivers from the lenovo support page.I've got everything working except for this fn + f11/f12 buttons (brightness+/-)I only able to ajust my screen brightness in control panel. I've tried to install graphics drivers (intel hd and amd) from lenovo support website , and also latest intel hd graphics driver from intel. But I still can't adjust screen brightness through fn hotkeys...What should I do?System Model : Lenovo Ideapad 300-14iskProcessor : Intel Core i5-6200URead other answers
Hello TechSupportGuy Fora,
Win7 64bit user here, if that helps.
I recently purchased a Genius F509 Graphics Tablet and it is amazing!
I am currently trying to modify the hotkeys on it using the provided software, MacroKeys Manager.
The way it works is this:
Create a new profile (default settings cannot be changed)
Select a key
Write a descriptive hint
Select a hot key combination or link to a file/program
Below is an example of a working key in my Custom profile:
My problem is this: The default settings include a hotkey which opens the aero desktop window switcher thingy (Ctrl + Windows key + Tab on a keyboard), and I would like my custom profile to do the same. I have imitated the default profile's settings in my custom profile, but the hotkey does nothing when the custom profile is activated.
I have looked through the installation disk, and found the default settings file, called windows7.ini in the system32 folder. I checked it and it only contains data pertaining to MacroKey Manager. Looking down the list, I find the data which describes the setup for the pad I am using. This is the only one which sets key #22 to aero window switching.
MacroKey4=^... Read more
Dratted new laptop (Lenovo G505) came with Win 8. I had a Win7 install CD and license key, so I figured why not?
The rest is a bit of a nightmare... Windows installed perfectly, but was missing drivers for some of the USB ports, networking and WiFi. Found those on the Lenovo site, but even after hunting everywhere, could not find a couple of drivers so things are infuriatingly wonky (as opposed to lovably wonky!).
The mouse (touchpad) is doing an annoying hover-to-click thing I cannot seem to turn off, but most significantly, the hotkeys are only barely working and I cannot seem to adjust the monitor brightness no matter what I do. I've got it so the volume (F1-F3) and all function keys are working, but the brightness-up key does NOTHING, while the brightness-down key shows a blank "fuel gauge" indicating that there is NO brightness, while in reality, it's turned up all the way and barely watchable. :-(
Any suggestions for either or all of these woes???
I think it's disgusting how the Microsoft/Lenovo monopolists are still working hand-in-hand to make a system that is dysfunctional without Windows 8. :-(
Was the Windows 7 installation disc a retail copy or a OEM version?Read other 2 answers
OK so we (my dad and me & someone else) are repairing a Elitebook 8440p for my dad and i'm wondering Even if the elitebook 8440p doesnt support windows 10 - does it support windows 8/8.1? i'm only asking cause my dad gave me to 2 licenses and was wondering if the elitebook 8440p supports windows 8/8.1 cause then i can give him 1 of the licenses while my lenovo has the other - cause the way i see it - if it doesnt support windows 10 then at least it would support windows 8 or 8.1 lowest so the question - is it offically support or is there a list of supported devices for windows 8/8.1 ????
Hi: All I can tell you is that there is no official W10 driver support by HP for the 8440p. I have the model that preceeded the 8440p (the 6930p) and it runs W10 just fine. But mine does not have a webcam, and I do not use any of the security features like the fingerprint reader, so I cannot report on those devices. All the drivers are installed though in the device manager, and I used the W7 drivers for whatever W10 didn't install, such as the card reader and HP 3D driveguard.Read other 6 answers
We just got a few of our first Elitebook 840 G3 laptops. We have a boot logo we used on our previous G1 and G2 models. I tried to run it on the new G3 but it returned an error saying it couldn't do it. Is there a newer version of the eRepLogo utility that will work with the G3?
PipingRockIT wrote:We just got a few of our first Elitebook 840 G3 laptops. We have a boot logo we used on our previous G1 and G2 models. I tried to run it on the new G3 but it returned an error saying it couldn't do it. Is there a newer version of the eRepLogo utility that will work with the G3?Is that a HP product?Read other 5 answers
can i use HP EliteBook 820 G2 drivers to support HP EliteBook 820 G3?
Hi You can use the drivers from this link below http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=7815290&swLangOid=8&swEnvOid=4060 for win 7 64 BitRead other 2 answers
Hi, I have EliteBook 840 G3 with M.2 SSD by LiteOn (LITEON CV1-8B256). Does that drive support Full Disk Encryption? Somehow this is not explicitly state on neither HP nor LiteOn website. I enabled drive password in boot but I want to know if that password is actually used to encrypt the content. Not asking about Windows or BitLocker. This is question about hardware support and hardware encyrption only. Thanks!Read other answers
Hi,I've a question regarding my laptop laptop HP EliteBook 840 G3. I want to buy the Kensington SD4600P USB-C Universal Dock with Power: https://www.kensington.com/en/za/4491/k38231ww/sd4600p-usbc-universal-dock-with-power#.V_1NJOh94UA But I want to make sure that it is completely compatible with my laptop. When I checked with Kensington, they said all laptops with a USB-C port that supports USB Alternate (Alt) mode are compatible. From the user manual of my laptop & online search, I could not find out if EliteBook 840 G3 has USB Alternate (Alt) mode. Does anybody know more? Thanks in advance.Read other answers